[Q] Can't get into recovery... - Droid RAZR M Q&A, Help & Troubleshooting

For some reason I can't boot into recovery mode. Yesterday I tried to flash the PAC ROM but got stuck in the "PAC is loading" screen. I had to turn off and flash back to stock with RSD light. Now, I can't get into my recovery (TWRP 2.5.0.0). When I use adb to get to recovery I get a screen with a fallen over android with its hood open and a a red triangle with a exclamation mark in the middle. I've tried to re-flash TWRP but that doesn't change anything. I'm assuming this is some kind of error, anybody know what to do? I've also tried to use cwm but I can't get into that either.
Also, how do I not get stuck in that "PAC is loading" screen when flashing?

ImStillLearning said:
For some reason I can't boot into recovery mode. Yesterday I tried to flash the PAC ROM but got stuck in the "PAC is loading" screen. I had to turn off and flash back to stock with RSD light. Now, I can't get into my recovery (TWRP 2.5.0.0). When I use adb to get to recovery I get a screen with a fallen over android with its hood open and a a red triangle with a exclamation mark in the middle. I've tried to re-flash TWRP but that doesn't change anything. I'm assuming this is some kind of error, anybody know what to do? I've also tried to use cwm but I can't get into that either.
Also, how do I not get stuck in that "PAC is loading" screen when flashing?
Click to expand...
Click to collapse
The easiest way to get into recovery is to power down, hold all three buttons and select recovery. Try wiping data after flashing PAC. Make sure your boot loader is unlocked.
Sent from my XT907 using xda premium

Leraeniesh said:
The easiest way to get into recovery is to power down, hold all three buttons and select recovery. Try wiping data after flashing PAC. Make sure your boot loader is unlocked.
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
Yup, did all of this, same result. My bootloader is unlocked.

ImStillLearning said:
Yup, did all of this, same result. My bootloader is unlocked.
Click to expand...
Click to collapse
couple of things:
1.) battery could be low, and thus unable to boot up. I would suggest plugging it in (outlet, not PC). let it sit for 15 minutes. you should see the battery charging screen. after waiting 15 minutes, try to get into recovery via power+volume up+ volume down, then select recovery
2.) doing the RSD could wipe the recovery - are you able to boot up normally into the ROM? if not, make sure you have all of the drivers installed on your PC, and re-read the installation instructions (I'm sure you already have, but sometimes going over them again might open your eyes up to something you forgot)
I'm not sure where it is, but see if you can boot into safemode (google search for it).
my only similar experience is when I tried to install a custom kernel on PAC, and nothing would display on my screen (despite me hearing notifications). I tried several times to get back into TWRP, but finally got it after pressing the three buttons, waiting about 10 seconds, pressing volume down one time, then volume up once (the pattern to get into recovery)
hope this helps.

RSD flashes your stock recovery again.
Hold volume up + down + power, wait for 5 seconds for the phone to power off.
Then hold the same, volume up + down + power to get into your menu screen, select adb fast boot and flash your recovery. (fastboot flash recovery YOUR_RECOVERY_FILE.img)

Power + Volume Down (-) = Reboot
During reboot:
Press and hold Volume Up (+) = Recovery
Press and hold Volume Down (-) = Fast Boot
Press and hold Volume Up (+) and Volume Down (-) = Boot Menu

Related

rebooting loop help! (upgrading)

Im trying to flash a new ROM but cannot seem to enter recovery mode:
I had revolver 3.6 and wanted to upgrade to the latest, so I held down power and selected recovery, now its in some type of rebooting cycle where it tries to boot up with the "Eee Pad" in the center and the "ASUS/NVidia" at the bottom, this stays on for about 3 secs then it appears to power off and the cycle starts again.
Holding down just the power button seems to do nothing, but if I hold power+volUP for a few seconds it seems to make it power off for good. From this powered down state, pwr or pwr+volUP does nothing. From this powered down state pwr+volDown brings up the boot screen + the small white letters in the upper right saying to hit volUp within 5 secs to enter RCK but if you do this then you get the reboot loop all over. If you let it sit there Itll allow you to either coldboot or eraseuserdata+cold boot. This allows the tablet to boot up normally.
But I just can never seem to boot to recovery. I have revolver parts and the reboot2recovery and the recoveryinstaller.apk all installed. What am I missing?
What about cwm? Sounds like you still on stock recovery.
How did you root? And how did you flash recovery? Were you ever able to get into recovery?
My gut tells me your recovery isn't compatible with your bootloader and/or boot.img.
Thanks for the help. I don't think i loaded cwwm when i originnally rooted. I reded rooting and it put cwm5 on.

Custom Recovery Won't Open

Hello,
I'm having a issue with Custom Recovery.
I've tryed to install both (CWM and TWRP).
The thing is when I turn off my device to
turn it on again pressing Vol Up + Power + Home I got a message saying "Recovery Booting". But the recovery doesnt start, instead my phone vibrate and begins to boot normally. It doesnt enter in custom recovery mode.
I was hoping someone could help me on this.
My device:
Stock ROM
Root (Edited to get rid of Custom status)
1337UCUAMDL
Does anyone know how to unistall a custom recovery or have any idea why this is happening?
By the way I followed this steps
http://forum.xda-developers.com/showthread.php?t=2314494
Thanks
Are you letting go of the power button when the device vibrates?
This is how I get in recovery...while phone is on, long press power button for power menu, press restart...than only hold the volume up while it restarts and nothing else, it will than boot into recovery
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
mg2195 said:
This is how I get in recovery...while phone is on, long press power button for power menu, press restart...than only hold the volume up while it restarts and nothing else, it will than boot into recovery
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
have you tried re-flashing the recovery?
Have you tried downloading one of the simple reboot tools that let you choose to reboot recovery?
Thanks for the help guys.
So I tried enter in recovery thru CWM option (Restart in Recovery) it worked.
But it doesnt work when I try manually (vol up + home + power). I really dont know why.
I'm afraid flashing a custom rom doing this way, because if something goes wrong I wont be able to acess the costume recovery.
Is there a way to unisitall the custom recovery?
Vinao said:
Thanks for the help guys.
So I tried enter in recovery thru CWM option (Restart in Recovery) it worked.
But it doesnt work when I try manually (vol up + home + power). I really dont know why.
I'm afraid flashing a custom rom doing this way, because if something goes wrong I wont be able to acess the costume recovery.
Is there a way to unisitall the custom recovery?
Click to expand...
Click to collapse
you can flash cwm touch using loki from my thread process is simple and easy files included
http://forum.xda-developers.com/showthread.php?t=2384388
Vinao said:
Thanks for the help guys.
So I tried enter in recovery thru CWM option (Restart in Recovery) it worked.
But it doesnt work when I try manually (vol up + home + power). I really dont know why.
I'm afraid flashing a custom rom doing this way, because if something goes wrong I wont be able to acess the costume recovery.
Is there a way to unisitall the custom recovery?
Click to expand...
Click to collapse
when you see that blue text, and even right before that when your s4 vibrates, are you releasing just the power button? also, have you tried mg2195's suggestion? what recovery are you currently running?
Just flash a different recovery using the one u have.when I first rooted my S4 I used ROM manager ,it had the T-Mobile S4 option so I tapped it and it flashed CWM .after reading about "Loki"I decided to go with the auto Loki .I downloaded the auto Loki and flashed it with the recovery I got from ROM manager.not one problem and I like MDOB MF3 rom
Sent from my SAMSUNG-SGH-I337 using xda premium
Vinao said:
Hello,
I'm having a issue with Custom Recovery.
I've tryed to install both (CWM and TWRP).
The thing is when I turn off my device to
turn it on again pressing Vol Up + Power + Home I got a message saying "Recovery Booting". But the recovery doesnt start, instead my phone vibrate and begins to boot normally. It doesnt enter in custom recovery mode.
I was hoping someone could help me on this.
My device:
Stock ROM
Root (Edited to get rid of Custom status)
1337UCUAMDL
Does anyone know how to unistall a custom recovery or have any idea why this is happening?
By the way I followed this steps
http://forum.xda-developers.com/showthread.php?t=2314494
Thanks
Click to expand...
Click to collapse
This is actually a common problem for some reason. There's an easy workaround:
Long press the power button and choose "power off". Give your phone a few seconds to turn off completely. Once it's off, press and hold these 3 buttons at the same time: POWER+VOLUME UP+HOME. Look at the top left of the screen - as soon as you see little blue text saying entering recovery, let go of all buttons immediately...but be ready...if your phone vibrates (it might be trying to reboot normally again), press and hold those same buttons again until you see the blue text again...then let go immediately. Now you will see your recovery!
Alternatively, when I'm not on a custom ROM that has the reboot options mod built in, I use this app to get to recovery/bootloader easily:
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot

S4 won't boot into cwm recovery

Okay so I have the cyanogen mod flashed on my s4. But for some reason now it won't boot into cwm recovery. Any ideas?
Sent from my SGH-I337 using xda app-developers app
bboyimpact33 said:
Okay so I have the cyanogen mod flashed on my s4. But for some reason now it won't boot into cwm recovery. Any ideas?
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
In Developer options, enable the Advanced Reboot.
The 3 button combo will work, it's just a matter of timing. Remove and replace the battery, hold vol up + home, then power, holding all three, and when it vibrates, let go of power only.
You could also hook up in USB Debugging mode and issue the command:
adb reboot recovery
And if you don't have a developer option go into about phone and tap build number 7 times.
<=LongJohnSilver=> said:
In Developer options, enable the Advanced Reboot.
The 3 button combo will work, it's just a matter of timing. Remove and replace the battery, hold vol up + home, then power, holding all three, and when it vibrates, let go of power only.
You could also hook up in USB Debugging mode and issue the command:
adb reboot recovery
Click to expand...
Click to collapse
Some people, including myself, cannot get it to work with the standard procedure...the solution is to basically do it twice. Here's a copy/paste of the instructions:
Long press the power button and choose "power off". Give your phone a few seconds to turn off completely. Once it's off, press and hold these 3 buttons at the same time: POWER+VOLUME UP+HOME. Look at the top left of the screen - as soon as you see little blue text saying entering recovery, let go of all buttons immediately...but be ready...if your phone vibrates (it might be trying to reboot normally again), press and hold those same buttons again until you see the blue text again...then let go immediately. Now you will see your recovery!
jeffreii said:
Some people, including myself, cannot get it to work with the standard procedure...the solution is to basically do it twice. Here's a copy/paste of the instructions:
Long press the power button and choose "power off". Give your phone a few seconds to turn off completely. Once it's off, press and hold these 3 buttons at the same time: POWER+VOLUME UP+HOME. Look at the top left of the screen - as soon as you see little blue text saying entering recovery, let go of all buttons immediately...but be ready...if your phone vibrates (it might be trying to reboot normally again), press and hold those same buttons again until you see the blue text again...then let go immediately. Now you will see your recovery!
Click to expand...
Click to collapse
Cool
CWM recovery only requires you to push the volume up key and then press the power key until the phone vibrates and then let go of the power button only. When the blue lettering appears, let go of the volume up. The home button should only be required with TWRP.
scott14719 said:
CWM recovery only requires you to push the volume up key and then press the power key until the phone vibrates and then let go of the power button only. When the blue lettering appears, let go of the volume up. The home button should only be required with TWRP.
Click to expand...
Click to collapse
Whatever the reason, that is not the case with my phone and many others. I've read several threads of people having the same issue. I'm not sure if it's an issue with the OUDHS CWM w/ auto-loki or what.
I've never heard of letting go of the power button only while still pressing volume up, but I gave it a try just to see...it did get me into CWM recovery but only after doing it twice, similar to the method I wrote above.
I have tried letting go of both volume up and power (no pressing home at all) and never found a way to get into recovery.
Anyways, it seems there's no harm in pressing the home button either way and it's probably easier than letting go of the power button and still holding volume up...and easier to explain too lol.
jeffreii said:
Whatever the reason, that is not the case with my phone and many others. I've read several threads of people having the same issue. I'm not sure if it's an issue with the OUDHS CWM w/ auto-loki or what.
I've never heard of letting go of the power button only while still pressing volume up, but I gave it a try just to see...it did get me into CWM recovery but only after doing it twice, similar to the method I wrote above.
I have tried letting go of both volume up and power (no pressing home at all) and never found a way to get into recovery.
Anyways, it seems there's no harm in pressing the home button either way and it's probably easier than letting go of the power button and still holding volume up...and easier to explain too lol.
Click to expand...
Click to collapse
I'm having the same problem.
Have you found an answer or work around solution yet?
GS4 AT&T
Base version: I337UCUAMF3
Kernel: 3.4.0-812098
CWM Recovery: 6.0.3.6
rooted with SD format
Never been able to flash the rom successfully
cariboucar said:
I'm having the same problem.
Have you found an answer or work around solution yet?
GS4 AT&T
Base version: I337UCUAMF3
Kernel: 3.4.0-812098
CWM Recovery: 6.0.3.6
rooted with SD format
Never been able to flash the rom successfully
Click to expand...
Click to collapse
You need to read... Seriously, you are going to brick your phone. Do not try to install any custom recovery or ROM of any kind on MF3.
Why can't people read?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
bboyimpact33 said:
Okay so I have the cyanogen mod flashed on my s4. But for some reason now it won't boot into cwm recovery. Any ideas?
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
My minor issue is that when I boot to recovery (twrp) it get to the twrp splash screen then freeze. Takes me another reboot or two before recovery really launches.
Tried reinstalling recovery and fixing permission, etc.. but same deal. Anyone have thoughts on this?
I boot into recovery all the time but I have to hold volume up and home button.
Bump!
I'm having the same issue. What I did was that I had the CWM recovery installed and tried to reset the flash counter. Now the phone won't boot into the recovery, it just boots up as usual when I press vol up+home+power up. I appreciate any help! :/
metalfr33ak said:
Bump!
I'm having the same issue. What I did was that I had the CWM recovery installed and tried to reset the flash counter. Now the phone won't boot into the recovery, it just boots up as usual when I press vol up+home+power up. I appreciate any help! :/
Click to expand...
Click to collapse
Can you get the blue text in the upper left corner of the screen to appear at any time?
In my case, trying to get into recovery via the 3 buttons is a matter of very precise timing if I try pressing all 3 buttons at the same time. The instant I see the blue text I let go of everything and it works. Hold it for even a fraction of a second longer and the blue disappears and it goes into a normal boot. It works much better if I press Vol Up, then add Power, then add Home. I'm doing that sequence fairly quickly but the point is I'm not trying to press 3 buttons at the exact same time.
But I'm using CWM so I don't need the 3rd button...
From a powered-down state I hold Vol Up then Power and hold both through the vibration until the blue text appears and it goes into CWM recovery just fine. There seems to be a bit more leeway in terms of how fast you need to let go this way although I just tested and holding about a half second too long caused it to bounce out of recovery and do a normal boot. Let go immediately when you see the blue.
Phone won't boot..
So after using CASUAL, my phone rebooted, and got stuck on the splash screen with RECOVERY BOOTING.. in the top left corner. I pull the battery, try to do a normal reboot; takes me to the same screen. Trying the 3 button combo for recovery; same thing. Any suggestions?? I am NOT on MF3 Firmware.
**EDIT** Should have looked into it more before posting, but Found my solution returning to STOCK
im having the same problem.. i rebooted using ROM MANAGER and the android with red exclamation mark appeared... when i hold de buttons, there are blue letters, but the recovery mode dont work, just the android recovery...
edgarzin said:
im having the same problem.. i rebooted using ROM MANAGER and the android with red exclamation mark appeared... when i hold de buttons, there are blue letters, but the recovery mode dont work, just the android recovery...
Click to expand...
Click to collapse
What is the baseband version on your phone?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
guitarpunk8403 said:
What is the baseband version on your phone?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
hey man.. thanks for replying, baseband is MDL.. since CWM wasnt working, i installed TWRP and it is working. It offers the same results right? Im want to flash a 4.4.2 rom...
thanks.
It should....I'm stuck on safestrap, but I always used TWRP on my S3
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Locoman_ said:
My minor issue is that when I boot to recovery (twrp) it get to the twrp splash screen then freeze. Takes me another reboot or two before recovery really launches.
Tried reinstalling recovery and fixing permission, etc.. but same deal. Anyone have thoughts on this?
Click to expand...
Click to collapse
Same with my gionne ctrl v4s lollipop stock ,when i flash cwm made by mirchifood convertor but then i flash that stock recovery it works
But i really want cwm ir twrp to installl supersu and do backups

[Info] Guide to entering safe mode, bootloader, stock recovery

Yes, I know, everyone knows how to enter safe mode, bootloader, and recovery.
I found there are some inconsistencies to entering and using recovery depending on your which software you are running. In addition there are multiple ways of entering stock recovery.
Also I always see people asking this question because somehow the keypress order is not intuitive.
Entering Safe Mode
Tablet booted and running Android
Press/Hold Power button until power menu shows up
Tap/Hold Power off option
Choose OK to reboot in safe mode
Tablet powered down
Press/Hold Power button until Google screen shows up, RELEASE Power button
Press/Hold VolDn until Android has booted up
If successful, you will see Safe mode overlayed on bottom left of screen.
Entering Bootloader (ie fastboot mode)
Tablet booted and running Android
From adb
adb reboot bootloader
can also choose recovery from menu after bootloader comes up
From app
Use Quick Boot from Google Play
Tablet powered down
Power+VolDn while booting to enter bootloader
Release buttons after you see bootloader screen
Entering Stock Recovery
Tablet booted and running Android
From adb
adb reboot recovery
From app
Use Quick Boot from Google Play
Tablet powered down
Power+VolUp while booting to enter recovery
You can release buttons after you see Google on screen
When Stock Recovery starts you will see the Android fallen down screen
To bring up the Recovery menu
Power+VolUp to show recovery menu
Must be this sequence Press/Hold Power, THEN Press/Release VolUp, release Power
Within menu
VolUp to move up
VolDn to move down
Power to select
In addition, I found an inconsistency with JSS15J stock recovery that wasn't in the JWR66N recovery
While at the Android fallen down screen if you mistakenly press
VolUp
instead of
Power+VolUp
you will still get the Recovery menu.
However, VolUp will no longer function. It will instead become a toggle for switching between the Recovery menu and the Android fallen down screen
Android fallen down screen
VolUp to toggle recovery menu
Within menu
VolUp does not work since it toggles recovery menu
VolDn to move down
Power to select
sfhub said:
Entering Stock Recovery
Tablet booted and running Android
From adb
adb reboot recovey
Click to expand...
Click to collapse
Are you sure with this command. I think it must be => adb reboot recovery <= or am I wrong ???
pRo_lama said:
Are you sure with this command. I think it must be => adb reboot recovery <= or am I wrong ???
Click to expand...
Click to collapse
Sorry, typo, fixed.
i`m on completely stock JSS15Q and i cant get into stock recovery. When im trying i see "no command" and red exclamation mark on the laying robot. What should i do?
laska300 said:
i`m on completely stock JSS15Q and i cant get into stock recovery. When im trying i see "no command" and red exclamation mark on the laying robot. What should i do?
Click to expand...
Click to collapse
sfhub said:
Entering Stock Recovery
Tablet powered down
Power+VolUp while booting to enter recovery
You can release buttons after you see Google on screen
When Stock Recovery starts you will see the Android fallen down screen
To bring up the Recovery menu
Power+VolUp to show recovery menu
Must be this sequence Press/Hold Power, THEN Press/Release VolUp, release Power
Within menu
VolUp to move up
VolDn to move down
Power to select
Click to expand...
Click to collapse
Please see RED section
Does the presence or absence of the red exclamation triangle mean anything?
Wot does safe mode do?
Anderson2 said:
Does the presence or absence of the red exclamation triangle mean anything?
Click to expand...
Click to collapse
I don't remember if there are two images one with and one without the triangle. I think I've only seen the image with the red exclamation point.
I've never seen anything to indicate the red exclamation mark is something you need to pay attention to.
Now if you apply an update and there is an error, then that is something I would pay attention to.
LoVeRice said:
Wot does safe mode do?
Click to expand...
Click to collapse
It doesn't load the stuff you added.
It is similar to safe mode on a PC, used to diagnose whether the issue is in the stock ROM or is in something you introduced by installing some app.
I Have a probleme
since a bought TAB 3 10.1 and it's boot into safe mode i'v restart it and turrn it off the back on but it didn't go what should i do ?
This thread is about nexus 7.
sfhub said:
This thread is about nexus 7.
Click to expand...
Click to collapse
oh sorry i was panic so i searched in every thing
Bootloader
If none of that works, try the command with a dash "adb reboot-bootloader" Depends on your device sometimes, sometimes unplugging your device right after you enter this command will keep it from getting stuck at the boot logo screen. If that doesn't work, hold the power button to power device down and then boot it into recovery instead using the button combo. Then you can wipe cache & start all over again.
I'm not even able to get into Recovery. I can get to the bootloader, then I select "Recovery mode" and it shows the Google logo, but it never goes into recovery. I have let it sit at the Google logo for a couple of hours, and end up just holding down the power button to shut it down.
I have tried Skipsofts toolkit, as well as Wug's, to try to unlock the bootloader. This ends up with the device hanging at the "Unlock bootloader" screen after selecting "Yes". Again, I have left it in this state for well over an hour with no change.
Here's some info on my 2013 Nexus 7:
KitKat 4.4.4
Never rooted
Never unlocked bootloader
HW version rev-e
Bootloader version FLO-04.02
I suspect my Nexus knew I was supposed to go on travel next week and is faking sick.
Any help would be appreciated. Thanks.
Hi guys i have a google nexus 5 and it is locked state. It is getting booted again and again but it jiust reaches google logo and again restarts. Safe boot is also enabled so i cant enter in recovery mode also. Please help me ASAP.

Can't get into recovery mode

Here's my problem.
I can't get into recovery by pressing the power up, home, power buttons. It says it's 'entering recovery', but then it gives another 'buzz' (like when the phone starts), and just reboots normally.
I used to be able to get into recovery with ROMManager, by selecting the 'boot into recovery'. Then I just got into my CWM and could do whatever I wanted. Now I can't do that anymore, probably because my device is not rooted atm (got CM12 on it though). I wanted to root it, but I can't get into recovery.
I already tried flashing TWRP with Odin (download mode does work), but that doesn't work either. I obviously searched google and XDA for the problem, and I saw suggestions for other phones, like updating the bootloader. But I can't find any information or files for updating the bootloader.
sebas156 said:
Here's my problem.
I can't get into recovery by pressing the power up, home, power buttons. It says it's 'entering recovery', but then it gives another 'buzz' (like when the phone starts), and just reboots normally.
I used to be able to get into recovery with ROMManager, by selecting the 'boot into recovery'. Then I just got into my CWM and could do whatever I wanted. Now I can't do that anymore, probably because my device is not rooted atm (got CM12 on it though). I wanted to root it, but I can't get into recovery.
I already tried flashing TWRP with Odin (download mode does work), but that doesn't work either. I obviously searched google and XDA for the problem, and I saw suggestions for other phones, like updating the bootloader. But I can't find any information or files for updating the bootloader.
Click to expand...
Click to collapse
Reboots trying to go custom recovery are normal sometimes.
Lil guide for enter custom recovery (TWRP):
1. Power off your device completely.
2. Press and hold Volume Up, Home and Power buttons simultaneously.
3. Release only the Power button when the logo of Samsung in white appears (you will see little letters in blue and red on the top left of the screen).
4. You will see the blue logo of TWRP (pic attached) then and you can release all buttons and start to navigate for the custom recovery.
Joku1981 said:
Reboots trying to go custom recovery are normal sometimes.
Lil guide for enter custom recovery (TWRP):
1. Power off your device completely.
2. Press and hold Volume Up, Home and Power buttons simultaneously.
3. Release only the Power button when the logo of Samsung in white appears (you will see little letters in blue and red on the top left of the screen).
4. You will see the blue logo of TWRP (pic attached) then and you can release all buttons and start to navigate for the custom recovery.
Click to expand...
Click to collapse
Thanks for the reply, but I don't think you understood my question. I know how to get into recovery when it all works. I've done it many times before. The problem is that it shuts down while booting into recovery, and then just reboots normally.
I only installed TWRP because CWM wouldn't work, but TWRP doesn't either. So I guess it has to do with how the device boots into recovery, regardless of what the recovery is.
Anyone? I kinda want to flash another ROM, but I'm unable to right now.
sebas156 said:
Anyone? I kinda want to flash another ROM, but I'm unable to right now.
Click to expand...
Click to collapse
hi
Check your power button.....it happened before , a defective power botton will make it hard to enter recovery or download mode
MAX 404 said:
hi
Check your power button.....it happened before , a defective power botton will make it hard to enter recovery or download mode
Click to expand...
Click to collapse
I don't think that's the problem. I have 0 issues with the power button. Also, when I try to boot into recovery, it actually says it's 'starting recovery'. Then it stops with a buzz and reboots.
sebas156 said:
I don't think that's the problem. I have 0 issues with the power button. Also, when I try to boot into recovery, it actually says it's 'starting recovery'. Then it stops with a buzz and reboots.
Click to expand...
Click to collapse
may be one of the other push buttons.....
try to get into recovery with out pressing the power button and see if is possible...if so then the problem is coming from there.

Categories

Resources