hey guys im going back to stock firmware via odin, and i downloaded the new firmware BMG1_INU from sammobile. I unzip it, but i forgot where to put the files on odin, is it PDA or Phone.
thanks
You should add it to the PDA section.
Related
I;ve been having some issues with my phone and I relized that I was on a leaked version of 4.3. Could someone let me know if this is the most current stock version of android for the sprint s4
SPH-L720_MF9_Stock_Factory_Restore(compressed archive).exe
http://www.rwilco12.com/downloads.p...PH-L720)/Stock ROMs/MF9/Full Restore/Unrooted
If so can I just use odin and flash this back onto the phone and ill be current or shall i say sprint current?
MK2 is the latest.
You could grab the MK2 .tar from here (the tar.md5 is in the zip, just extract the .tar.md5 and put that one file in the PDA slot of Odin) and flash it via Odin.
It'll reset everything (all partitions and modem etc.)
Then root via CF-Autoroot (it's in the dev section), add recovery using GooManager and then do what ever you want.
Wassup guys, ive been searching the forum for going on three days now trying to revert back to stock. i keep getting fails through Odin 3.09 and 3.07. Crazy thing is that i have a baseband of mj5 and a build number of mi9. Im on my last nerve with this. Had the phone since Oct. and love it to death. But right now im ready to take it out and practice shooting. Im a fairly knowledgeable with odin and flashing in recovery but this has me at a stand still. Any help as soon as possible would be greatly appreciated. I have downloaded the MI9 files for odin (BL, AP,CP,CSC,PIT) for MJ5 i have (BL,AP,CP,PIT). If im missing some files or doing something wrong a link to a good tutorial would help. Thanks
Just tried flashing mI9 firmware in download mode and got SW REV CHECK: (sbl1) fused2> binary 1
did the whole *#1234# and got AP Mj5 and CP MI9
Confusing.
Be more clear instead of shooting the phone.
What custom rom you were on, if i understand you correct? Android version and your firmware?
kenny1991 said:
Confusing.
Be more clear instead of shooting the phone.
What custom rom you were on, if i understand you correct? Android version and your firmware?
Click to expand...
Click to collapse
No custom rom, 4.3 Baseband says MJ5. Build number says MI9. i dont know if they are supposed to be the same. I was rooted and unrooted. Just trying to get it back to days 1, fresh out the box, Bone stock.
Ok i did the *#1234# now my AP is N900AUCUBMI9,
CP is N900AUCUBMJ5,
and my CSC is N900AATTBMI9.
this is confusing the hell outta me. in the earlier post i didnt have a CSC. only the AP and CP.
Flash a newer firmware or same as your last firmware. I assume you can't downgrade to the original firmware if you have updated once to a newer one as bootloader gets locked.
Or flash 4.4.2 with Odin 1.85
kenny1991 said:
Flash a newer firmware or same as your last firmware. I assume you can't downgrade to the original firmware if you have updated once to a newer one as bootloader gets locked.
Or flash 4.4.2 with Odin 1.85
Click to expand...
Click to collapse
I have tried that also. I dld the N900AUCECMLG.zip for the phone but when i unzip it im at a loss for what to do with the files. i dont know if it should be done in recovery or what files to use with odin. I dont see any tar or md5 files.
You have [email protected]? If so this is the correct firmware for you.
http://www.sammobile.com/firmwares/3/?download=25106
From there you can see instructions to how to flash. Read carefully. Don't panic.
Download rom. And use e.g winrar ro open just once when the files are downloaded. You are extracting twice and stop doing so. Open onse and drag and drop files to your e.g desktop. Once you do this you get md5.
You put the phone into download mode when flashing firmware. Turn it off. Volum down+home+power button at same time when asked if you want to continue press Volum up. Then you are in download mode.
Why do you even flash anything if you can't basics. Read more. If you still can't do this all before attempt or ask a friend to do it for you.
So I have NE9, rooted, on my s5. I wanted to update to the latest firmware and tried to ODIN back to stock. I downloaded the NE9 tar file since that's what I am on. I flashed it via ODIN and it looked like everything worked OK, but when it rebooted nothing was changed.
Do I need to ODIN the NCG tar file?? I figured since I was on NE9 that is what I should use.
Can I just flash the N12 file via ODIN and save some time??
mpetruzz said:
So I have NE9, rooted, on my s5. I wanted to update to the latest firmware and tried to ODIN back to stock. I downloaded the NE9 tar file since that's what I am on. I flashed it via ODIN and it looked like everything worked OK, but when it rebooted nothing was changed.
Do I need to ODIN the NCG tar file?? I figured since I was on NE9 that is what I should use.
Can I just flash the N12 file via ODIN and save some time??
Click to expand...
Click to collapse
Yes, you can flash the NI2 file.
Hey guys,
I installed xtrestolite on my G900F and changed the bootloader and modem of my device before installing it. First problem i had was with CSC. It is a single CSC and i couldn't install my countries CSC on it. That's why i went back to stock. I installed Kit Kat firmware that i downloaded from sammobile and then changed CSC to my countries CSC. Then i updated firmware to lollipop using Kies3. But installing stock rom didn't change bootloader version or modem version. Now i have kitkat bootloader version, kitkat baseband version and lollipop firmware version all different and i want to them all to be the same(latest lollipop). Is there any way to do this without downloading stock rom from sammobile again ? And if not, then can i just put the tar.md5 file that i will download from sammobile in bootloader, pda and CP at the same time and install with odin ?
Thanks in advance !
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Sean89us said:
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Click to expand...
Click to collapse
Hey thanks for the tip ! I just downloaded stock firmware but i don't know how to extract bootloader and modem from tar.md5 file and then make them odin flashable. I uploaded image with all the files that are in my tar.md5 file. What of these are for bootloader and what for modem and how do i make them odin flashable later ?
Thanks in advance
This is the latest OTA Update for all major carriers. THIS WILL UPDATE YOUR BOOTLOADER SO THERE IS NO GOING BACK! I'm downloading, uploading to my Google Drive and posting this here as reference.
And of course, after flashing this in Odin you can go to https://samsung.firmware.science and chose QK5 to whichever Oreo Beta is latest or you can enjoy having the latest flashable update.
LINK: https://drive.google.com/open?id=1x9-mYPbDKgsa4sS0bMdu9yfmczZywqM_
Uploaded. I already removed the .md5 off the end of the files, just extract and flash away
How do you go about flashing this? Flashing my S5 there was only one file and you loaded that into the AP slot in Odin. With the S8 software it looks like there are 5 separate files. Do you only flash the AP file or all of them? Also, I tried another firmware that was supposed to be Verizon firmwareand had some cricket and metropcs apps installed. Will this be the Verizon firmware that came with the phone from the factory or is it like the other firmware I downloaded and installed from Sammobile? Thanks for any help on this. Trying to get my phone back to how it was when I took it out of the box.
Hitchhiker90 said:
How do you go about flashing this? Flashing my S5 there was only one file and you loaded that into the AP slot in Odin. With the S8 software it looks like there are 5 separate files. Do you only flash the AP file or all of them? Also, I tried another firmware that was supposed to be Verizon firmwareand had some cricket and metropcs apps installed. Will this be the Verizon firmware that came with the phone from the factory or is it like the other firmware I downloaded and installed from Sammobile? Thanks for any help on this. Trying to get my phone back to how it was when I took it out of the box.
Click to expand...
Click to collapse
I Extracted and flashed AP, BL, CP and CSC. Verizon firmware.
The link you posted is dead. Have any other mirrors possibly?