Hi. I have a At&T 8525. I dropped it this morning and my whole screen shifted just under 1/2 and inch to the side and that 1/2 inch turned white.
Did I break it, or could I just have knocked something loose on the inside? I just replaced the screen last Sept. and really don't want to take it apart again. If I have to replace the screen then I would just rather just wait to open it up, but if i can fix it without replacing it then I will go ahead and do it. THANKS!
Is the whole screen white or just that bit? If any of it works, I would think its repairable. I'm not a repair gal but I do destroy my own devices lol!
Hi,
are the "cracks" perfekt lines or does it really looks like a crack?
You could try open your Wizard and look for some not probably connected cable or something else,
but usualy, if a LCD is partially not working anymore, its broken .
Duke
Hi, I come on here quite a lot for information as it's an amazing resource! This time however, I'm attempting to give something back!
I experienced the "black screen on slide out" on Monday. Phone completely screwed. I've also had a few droppages and had it apart once before so there's no way warranty is gonna help!
I stripped it down and soon discovered what it is that actually fails on the ribbon. The coating had worn through due to rubbing on something during the slide out / in process. it had been playing up for a while, probably due to shorting out on the metal case, but now the tracks (aluminium?) had worn right down.....
In pic 1 i've circled the worn area. The shiny section is where i'd tried taping over it to prevent shorting, before i realised the tracks were gone.
Got an almost new one off ebay for 15 quid and, realising it was going to happen again, came up with a solution that, so far, looks like it will work....
A while back I bought some "anti rattle felt" for my car's dashboard - really thin and strong self adhesive felt to prevent squeaking joins between dash sections. I cut a piece of this and stuck it to the new ribbon. Once this stuff is on it's well stuck, by the way!
See pic 2 for the modded ribbon cable.
On reassembly everything is working just fine so far! Here's hoping that it lasts longer than 6 months this time!
Just need a new casing now as mine is decidedly second hand!
Hope this turns out to be of use to someone!
cool story bro
when i took apart my xperia to replace the housing this seemed like a really weak point in the device. glad to see someone who has had the problem has been able to fix it
Why does the screen go black?
Hi,
When the coating wears off the ribbon cable it exposes the tracks in it. when you slide the keyboard out the exposed tracks short out on the metal casing and the screen loses it's input signal.
thats whats happened on mine at least and i presume quite a few others?
HTH!
Update:
That's interesting: My phone was also losing signal with the keyboard out, and occasionally while closed up as well. It would just randomly drop to "no signal" for a few seconds.
It hasn't done it since replacing the ribbon cable.....could be coincidental of course.
I'm having the same problem
It just started a week ago and I got the phone in January off of ebay. I'm new to opening up the phone so could anyone help me find the correct tools or have a link to a site with pictured instructions?
I noticed that the sliding mechanism started to go loose about 4-5 months ago but didn't expect the screen not respond in landscape mode. I have yet to see the other symptoms you all are referring to. I would like to fix this before it get worse.
In mine case it went totaly black after one week of this problem... You have all the instruction on youtube, there is where i looked. For tools you can be inovative, but the exactly right ones come with housings from ebay, it is only 15EUR, and i bet you have some cracks so it wouldn't hurt replacing. That is what i did, along with ordering new sliding mechanizm, and new ribbon cable.
I am open for ideas to prevent my ribbon cable from being cut at it weakest point again.
I'm assuming my flex ribbon went bad yesterday, since sliding the keypad out causes my screen to shut off.
Already ordered a cable off ebay and will attempt to replace it myself :O
Replaced my flex ribbon cable with one I bought on eBay. The screen doesn't turn on at all now, which leads me to believe the cable I was sent is defective. Put the old one back in and it works okay, less landscape mode. ughhh what a pain.
great tips! my input is I bought a case off of ebay that was ~60$ and everything actually fit fine for me...so I wouldn't discount every seller but you do get what you pay for, the 15$ cases are probablly the ones that will give you problems
I working in a mobilephone repair center if anyone need help drop me a priv... i able to get 2nd hand or even brand new components
Replaced the flex ribbon cable -
I got my flex ribbon cable a few weeks ago and took it to my local repair shop. They replaced it but the LCD screen/optical joystick receives no power. The touchscreen and everything else on the phone works just fine now. I thought it was a defective item so it was exchanged with a new one.
Got the repair shop to replace it again and the outcome still remains the same as the first.
Theres no light coming from the screen nor the side illumination.
I just told the repair shop to just place the original back in for the mean time.
Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power botton.
Could it be defective a batch that the seller was sending out? or the repair shop's mistake and is playing dumb so they do not have to admint fault?
Hopefully there's an easy fix to this problem.
-Also I did inspect the ribbon before and after the repair. looks new as the OEm
Can anybody help me out with this new problem after replacing the cable -
perhaps you should try a hard reset. Ive had problems in the past where the optical joystick and the illuminators did not work, and that worked for me.
On the other hand, the top illuminators are on the same piece of hardware as the flex cable that was replaced, so a faulty flex cable is possible. The bottom illuminators are on the circuit board that the optical joystick attaches to, separate but connected to the flex cable.
Ive recently replaced my flex cable and touchscreen. The experience i had with the faulty touch screen was that it appeared to receive no power, but was in fact displaying a dark backlit illumination that could only be seen in the dark. At the same time however, the screen did not display anything. I'm not sure if this is similar to your experience, but if so then your touchscreen would need to be replaced.
ive done all repairs on the xperia myself, and one thing ive discovered is if something doesnt work right after a repair, simply disassembling it and reassembling it to make sure all the connections are properly done has worked for me in the past.
"Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power button."
Now when you say the power button, do you mean that a red light appears under it?
I dont know if i can come to a conclusion or that i can help (or have helped) you come to a conclusion, but i can only assure you that the xperia acts out in strange and weird ways.
Good Luck!
Tags
Dismantle / Disassemble Sony Ericson Xperia X1
http://www.ifixit.com/Teardown/Sony-Ericsson-XPERIA-X1/788/1
http://www.formymobile.co.uk/xperiadisassembly.php
http://www.youtube.com/watch?v=AWDurQrRt-Y (REAR)
http://www.youtube.com/watch?v=iyGUbxFqvyc&feature=related (FRONT)
http://www.youtube.com/watch?v=elgC8hwHfYQ&feature=related
For info.
Mike
Thanks for the links. I've tried the hardreset and restoring the original rom but the issue is still there. It's really bugging me that everything works but the LCD screen. I'm currently using MyMobiler to use my phone. The touch screen works fine and so does the soft keys. Just no power for the lights. I might just give up and wait for another phone that catches my eye and then tinker with the xperia myself. but if anyone got a solution or want me to test something then I'll give it a try.
My warranty is no longer affective so I'll use my phone as a tester to help others with any problems.
TRIONDAVE, how's your Xperia running now with the cable mod that you did? Its been 6 months since you created the thread. I hope you're still around.
My Xperia X1 works nearly fine, except for the keyboard issues, so I'm thinking of opening it up. If your Ribbon mod helped I might just do it too once I've got it opened. Mine has a MOUNTain of cracks though, and the battery compartment itself is cracked on both side enough to make the compartment CURVED. Hence the Battery cover doesn't sit well.
I'm looking around for broken Xperias which I might be able to use to change the internal cracked casing. Lets see.
DatDereX1 said:
cool story bro
Click to expand...
Click to collapse
My thoughts exactly.
Hello guys, I am in need of real help over here!
Its just that Ive replaced my ribbon cable, the old one got screwd up.
However I got done for 10 minutes ago, tried to start up the phone.. without success :,(
The ribbon cable doesnt have anything to do with the start up, only the screen am I correct? Cause I cannot even start my phone..
Ive connected the charger, but when I remove the battery it shows a red light, meaning no battery, correct?
So what may the problem be exactly? Maybe the battery is all dead, or?
PLEASE HELP!
for the people with ribbon failures how long have you had the phone before it occurred ? im just interested on the cables lifespan.
mine is fine so far but i have noticed the slider is flimsy and rocks left and right.
I spilled water on my phone they other night in my sleep. When I awoke the phone was still on but had frozen up. Upon a reboot it locked up on the splash screen and with a couple more tries it locked up on a black screen. Eventually I got it to boot to home but the touch screen isn't working and I'm getting force closes when I try to open any apps. I tried leaving it in uncooked rice to absorb the moisture overnight but I'm still getting the same problems. Anything I can do?
There are two very important rules when electrical equipment is soaked.
1: take the battery out as quickly as possible so it shuts down and doesn't short.
2: LEAVE IT OFF UNTIL COMPLETELY DRY! This can not be stressed enough. Having it turned on with water inside is like trying to kill yout phone intentionally.
I find the best way to dry it is to take of any covers, batteries, sd-cards, sim cards ad anything else you can easily dissasemble, and then leaving it in an oven on 40-50 degrees overnight. Electrical stove is kind of neccessary for this though, unless you have a gas stove with good temp adjustment.
If I bought a cracked LCD G1 and replaced the digitizer with the one on my broken phone (touch screen isn't working) it should be fine right? There are no actual electronics to the digitizer screen, right?
Snakebear said:
If I bought a cracked LCD G1 and replaced the digitizer with the one on my broken phone (touch screen isn't working) it should be fine right? There are no actual electronics to the digitizer screen, right?
Click to expand...
Click to collapse
Theoretically, that should work. Haven't done it so I cant account for it.
However, how will that stop the FC's?
No, you misunderstood. I plan to buy a functional G1 with a cracked digitizer and use my old digitizer from the water damaged phone to fix it.
Nevermind, just found out the glass has some electrical parts to it and that's probably what I shorted out. Guess that's out.
I had my phone in my pocket when i went on a drunken creek walk. Long story short I pulled my battery had the same problems as you. So for my fix I wiped flashed a new rom then wipe again for good measure. Stopped force closes and works like a charm now.
read my post here for water damage if it happens again....
http://forum.xda-developers.com/showthread.php?t=616213
Well I did a Nand backup to no avail but I havn't tried a full wipe/format. Maybe I will give that a go and see if it helps. Did your touch screen also fail?
I'm currently using the G1 my brother dropped in a toilet. It accidentally turned on when he was removing the battery. It's really odd that the phone is working 100% at the moment.
Give it a few days before you rule it dead.
My sister dropped a RAZR in the toilet one day (Stoopit!) so my dad took it out (no pee in derp), hair dryer, rice, window, BAM!
Snakebear said:
Well I did a Nand backup to no avail but I havn't tried a full wipe/format. Maybe I will give that a go and see if it helps. Did your touch screen also fail?
Click to expand...
Click to collapse
The left side of my screen did not work for about 5 hours after I placed it in rice. Some say you need to keep it in rice for a full day or so. Basically take out the SD card, sim card, and battery and place the rest of the phone submerged in rice for at least 8 hours or so. Then try the phone.
BTW, my phone was acting sluggish ever since then so this morning, I did a factory wipe of the phone and things seem to be working normally. I also copied the SD contents and formated the card.
Hi,
HISTORY:
I've had my defy screen shattered a while back and sent it to Motorola for repair (they did a terrible job at that). Ever since I got it back I can see small dust particles accumulating inside the screen. Gradually after a couple of months the top right corner became non-responsive and I left it that way for another 4 months until now!
As the warranty period was over, I thought of trying to clean the dust and see if that works. Unfortunately the connector on the touchscreen(digitizer) broke off and it stopped the touch completely.
My Question:
Is it possible that I had damaged something else(can something else be damaged?) that caused the touchscreen to cease functioning? :crying:
I can change the digitizer after buying it from ebay. But I would hate to waste any more money if this doesn't solve the issue. How likely is it that the touch functionality will be restored if I change the digitizer?
LCD is working fine, and I can use the volume rocker and power button perfectly.
P.S. please don't flame me for asking already answered question, I've been through a lot of threads before opening this one.
Hi all,
last week we had a really heavy rain and I was outside. As a precaution I put my phone out of my front pocket into my backpack only to realize that the backpack was filled with water when I came home.
The phone was swimming in water but still on and working but I had no equipment to open up the phone (damn T3) so I had to leave it powered on and put it in rice over night.
The next day when I tried to boot the phone the screen stayed off and you could see the liquid between the lcd and the digitizer.
I went to a local repair shop and they opened up the phone. I let it dry for some more days but the problem with the display remains.
I washed out the mainboards with iso and cleaned all corrosion I could see with a toothbrush but after replacing the screen it looks like the issue remains.
The phone makes sounds like it is working and giving notifications but the screen is just dead.
Do you have another Idead what I could do or do I need a new phone?
Thanks
crckmc
I am in the exact same boat (almost literally)
I dropped mine into the toilet (how cliche) and it also worked for a few minutes, then eventually the screen went black. I see nobody responded to you here, may I ask what have you ended up doing with it? Replace screen? Get a new phone?