Database Users

Please help stock on Samsung boot logo

please help, I checked Nand Erase All option (stupid of me) in Odin and flashed a stock firmware and now my phone is stuck on Samsung logo.

samanbabah said:
please help, I checked Nand Erase All option (stupid of me) in Odin and flashed a stock firmware and now my phone is stock on Samsung logo.
Click to expand...
Click to collapse
do you mean you are stuck on logo

jaythenut said:
do you mean you are stuck on logo
Click to expand...
Click to collapse
yes I am stuck on logo. I think I have soft bricked my phone and now I am desperately looking for a PIT file for my phone but still no luck

samanbabah said:
yes I am stuck on logo. I think I have soft bricked my phone and now I am desperately looking for a PIT file for my phone but still no luck
Click to expand...
Click to collapse
Have you flashed the right firmware you cannot downgrade it must be the same or newer for it to work, you can get the latest updates from www.sammobile.com

jaythenut said:
Have you flashed the right firmware you cannot downgrade it must be the same or newer for it to work, you can get the latest updates from www.sammobile.com
Click to expand...
Click to collapse
yes I have flashed the latest firmware. I am pretty sure.

samanbabah said:
yes I have flashed the latest firmware. I am pretty sure.
Click to expand...
Click to collapse
try this pull the battery out and back in put into download mode flash again with odin ,untick f-reset and reboot
with odin 3.07

jaythenut said:
try this pull the battery out and back in put into download mode flash again with odin ,untick f-reset and reboot
with odin 3.07
Click to expand...
Click to collapse
I followed your instructions but it still gets stuck on the logo

I have done everything I could. I also tried to install CWM but it gives me this error "secure check fail : recovery"

okay for those with the same problem as mine, I finally managed to fix this problem by going to recovery, then wiping data factory reset.

i've the same error,
it was because i use bobcat v2 with abyss kernel so after i would use echoe V5 but reflash a stock rom MJ7 to clean my phone
but ===> error the message just apear
I fixe the problem with a flash stock kernel ^^

[Q] GT-I9505 stuck at boot screen, No Recovery

Hi all.
I have big problems with a Galaxy S4 (GT-I9505).
A friend gave it to me becouse it doesnt start anymore. He was licen to Musik whan the screen turn black and the phone doesnt start anymore.
So it stucks at Bootscreen. I can start Odin mode and i tryied to flash CWM and TW Recovery. Also i tried to flash original Rom from Sammobile.
Odin passes with the recoveries but it doesnt work. The rom failed.
I got a error message when i try to start recovery mode.
Recovery Booting
Recovery is not seandroid enforcing
Set Warranty Bit: recovery
I cant get into fastboot mode. The informations in the Internet are that there is no fastbootmode for the gt-i9505.
Is there anybody who can help me? And sorry for my bad english

ScO_oT said:
Hi all.
I have big problems with a Galaxy S4 (GT-I9505).
A friend gave it to me becouse it doesnt start anymore. He was licen to Musik whan the screen turn black and the phone doesnt start anymore.
So it stucks at Bootscreen. I can start Odin mode and i tryied to flash CWM and TW Recovery. Also i tried to flash original Rom from Sammobile.
Odin passes with the recoveries but it doesnt work. The rom failed.
I got a error message when i try to start recovery mode.
Recovery Booting
Recovery is not seandroid enforcing
Set Warranty Bit: recovery
I cant get into fastboot mode. The informations in the Internet are that there is no fastbootmode for the gt-i9505.
Is there anybody who can help me? And sorry for my bad english
Click to expand...
Click to collapse
Hi mate,
Some more information would be nice.
Which was the latest firmware and which version did you want to flash?
http://forum.xda-developers.com/showthread.php?t=2265477
Take a look at this, especially to the "Odin troubleshooting" part.
Sent from my Galaxy S4 using Tapatalk

DarkerTimes said:
Hi mate,
Some more information would be nice.
Which was the latest firmware and which version did you want to flash?
http://forum.xda-developers.com/showthread.php?t=2265477
Take a look at this, especially to the "Odin troubleshooting" part.
Sent from my Galaxy S4 using Tapatalk
Click to expand...
Click to collapse
Hey. Thank you for the answere.
I tried to flash I9505XXUGNF6_I9505DREGNF2_I9505XXUGNF6_HOME.tar
The latest firmware was 4.2.2 (Austria 3)
I tried now another Odin version and i flashed it with PID file. The only result is that i get a recovery booting
in the top left corner but it still stucks... i cannot open recovery to wipe cache / factory reset.
The last thing i tried was to flash the original recovery. <- back to the 3 errors.
now i try another odin software with another usb port. odin passes with everything but i cannot open recovery. just stuck at Recovery Booting

ScO_oT said:
Hey. Thank you for the answere.
I tried to flash I9505XXUGNF6_I9505DREGNF2_I9505XXUGNF6_HOME.tar
The latest firmware was 4.2.2 (Austria 3)
I tried now another Odin version and i flashed it with PID file. The only result is that i get a recovery booting
in the top left corner but it still stucks... i cannot open recovery to wipe cache / factory reset.
The last thing i tried was to flash the original recovery. <- back to the 3 errors.
now i try another odin software with another usb port. odin passes with everything but i cannot open recovery. just stuck at Recovery Booting
Click to expand...
Click to collapse
Hi,
does Odin give a fail log? Or does it finish successfully?
Which Odin versions did you try?
And the firmware you want to flash now is a Austria 3 one as well? You can also take another version (but still with the same csc) in case that your current one is damaged or something like this.
Sent from my Galaxy S4 using Tapatalk

DarkerTimes said:
Hi,
does Odin give a fail log? Or does it finish successfully?
Which Odin versions did you try?
And the firmware you want to flash now is a Austria 3 one as well? You can also take another version (but still with the same csc) in case that your current one is damaged or something like this.
Sent from my Galaxy S4 using Tapatalk
Click to expand...
Click to collapse
Hi again.
I used Odin 3.04 and 1.85. Also i tried diffrent USB Ports.
I tried to flash CWM 6.0.4.7 Touch and Non Touch, also twrp.
It passes with all the recoverys as well with the rom from sammobile and the stock recovery rom from the other tread.
i tried with and without pit file. Odin passes everytime.
Afther restarting the phone i just get the blue (booting recovery) or the 3 error messages in the top left corner and it stucks for hours.
Iam not able to boot recovery and wipe the cache... and iam not able to boot into the system do something else.
the only thing working is the download mode.
iam out of ideas.

ScO_oT said:
Hi again.
I used Odin 3.04 and 1.85. Also i tried diffrent USB Ports.
I tried to flash CWM 6.0.4.7 Touch and Non Touch, also twrp.
It passes with all the recoverys as well with the rom from sammobile and the stock recovery rom from the other tread.
i tried with and without pit file. Odin passes everytime.
Afther restarting the phone i just get the blue (booting recovery) or the 3 error messages in the top left corner and it stucks for hours.
Iam not able to boot recovery and wipe the cache... and iam not able to boot into the system do something else.
the only thing working is the download mode.
iam out of ideas.
Click to expand...
Click to collapse
You can try to flash a three or four part firmware with Odin 3.09, it will wipe your device itselfs
Sent from my Galaxy S4 using Tapatalk

Try flashing the recovery again with auto-reboot unchecked.
But it sounds more like a hardware failure to me.

Thank you all for your help.
And yes. It was a Hardware failure.

[Q] [HELP] i9505 Recovery Booting Stuck

Hello guys,
I need your help again!
I recently changed my i9100g with this other device, GT-I9505 Italian version, no brand.
The history of this device was quite this: stock FW until 4.3 (just my suppose) --> CM11 --> try to flash 4.2.2 stock --> brick @[email protected]
Now I tried to put the original 4.4.2 firmware by flashing with Odin v3.09, because I don't want custom rom for the moment, just make it work.
The problem is that the phone stucks at Samsung logo, and when I tried to go in recovery mode, it stays on the same logo but there's a blue write in the top left corner "Recovery Booting".
Do you have any suggestion?
TY in advance

Drake9090 said:
Hello guys,
I need your help again!
I recently changed my i9100g with this other device, GT-I9505 Italian version, no brand.
The history of this device was quite this: stock FW until 4.3 (just my suppose) --> CM11 --> try to flash 4.2.2 stock --> brick @[email protected]
Now I tried to put the original 4.4.2 firmware by flashing with Odin v3.09, because I don't want custom rom for the moment, just make it work.
The problem is that the phone stucks at Samsung logo, and when I tried to go in recovery mode, it stays on the same logo but there's a blue write in the top left corner "Recovery Booting".
Do you have any suggestion?
TY in advance
Click to expand...
Click to collapse
Flash the stock rom again..and do NOT check autoreboot in odin.
The straight away boot into recovery, factory reset it..and you'll boot
"If someone helps, never forget to hit thanks ? "

DeepankarS said:
Flash the stock rom again..and do NOT check autoreboot in odin.
The straight away boot into recovery, factory reset it..and you'll boot
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Thank you very much for your reply!
It doesn't work, maybe I'm just doing something wrong, what should I have to do after flash?

Drake9090 said:
Thank you very much for your reply!
It doesn't work, maybe I'm just doing something wrong, what should I have to do after flash?
Click to expand...
Click to collapse
-Open odin
-Uncheck autoreboot
-Add your firmware file to the AP/PDA section
-Start the process
When this will end, your ohone wont boot automatically (obviously)
After 2-3 minutes start it, if it turns on properly congo..
If it doesnt..just boot into recovery (volume up+home button+power button) and perform a data wipe.
If this does not helo at all, download the LATEST KITKAT 4.4.2 UNBRANDED again for your phone as it can be a bad download issue too.
"If someone helps, never forget to hit thanks ? "

DeepankarS said:
-Open odin
-Uncheck autoreboot
-Add your firmware file to the AP/PDA section
-Start the process
When this will end, your ohone wont boot automatically (obviously)
After 2-3 minutes start it, if it turns on properly congo..
If it doesnt..just boot into recovery (volume up+home button+power button) and perform a data wipe.
If this does not helo at all, download the LATEST KITKAT 4.4.2 UNBRANDED again for your phone as it can be a bad download issue too.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I would try another firmware less recent, just to see what happens...
But I have great news: Philz touch works, so now I have a working custom recovery!
the problem is that I can't just flash a custom ROM to repair
I think I need the pit file, but I can't find one on the internet @[email protected]

Drake9090 said:
I would try another firmware less recent, just to see what happens...
But I have great news: Philz touch works, so now I have a working custom recovery!
the problem is that I can't just flash a custom ROM to repair
I think I need the pit file, but I can't find one on the internet @[email protected]
Click to expand...
Click to collapse
Y do you need a pit? Pit files are not to be played with and can possibly brick if not flashed with utmost care.
Try a stock firmware first. Dont try any stock firmware till you have a working phone..
"If someone helps, never forget to hit thanks ? "

DeepankarS said:
Y do you need a pit? Pit files are not to be played with and can possibly brick if not flashed with utmost care.
Try a stock firmware first. Dont try any stock firmware till you have a working phone..
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I'm flashing this firmware: I9505XXUGNG8_I9505ITVGNG1_ITV
I was thinking about pit because the philz says strange errors:
failed to mount /data to setup /data/media, or something like this... and also other problems related to /sdcard
Have you an idea on what to do?
I'm just following this guide: http://forum.xda-developers.com/showthread.php?t=2265477

Drake9090 said:
I'm flashing this firmware: I9505XXUGNG8_I9505ITVGNG1_ITV
I was thinking about pit because the philz says strange errors:
failed to mount /data to setup /data/media, or something like this... and also other problems related to /sdcard
Have you an idea on what to do?
I'm just following this guide: http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
The pit file is right there in @samersh72s thread
In the attachments.
Flash properly after reading the OP very carefully and DO NOT SKIP ANY STEP OR MODIFY any
Still IMHO a data wipe after reflashing can fix your bootloop.
"If someone helps, never forget to hit thanks ? "

DeepankarS said:
The pit file is right there in @samersh72s thread
In the attachments.
Flash properly after reading the OP very carefully and DO NOT SKIP ANY STEP OR MODIFY any
Still IMHO a data wipe after reflashing can fix your bootloop.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I thought the same way too, but didn't work...
The attachment doesn't work, but some posts later there is one working
I'll try and let you know the results!

Stll locked here...
Used yhe pit file, but nothing changed
in Philz Touch 6 with CWM 6.0.4.7 I have this error:
E: could not mount /data to setup /data/media path!
Have you ever faced it?

Drake9090 said:
Used yhe pit file, but nothing changed
in Philz Touch 6 with CWM 6.0.4.7 I have this error:
E: could not mount /data to setup /data/media path!
Have you ever faced it?
Click to expand...
Click to collapse
Ermm no...
@Lennyz1988 @MAX 404
Help?
Sent from my GT-I9500 using XDA Free mobile app

I was thinking about a possible cause: could it be that I'm using a wrong firmware?
this device is used, so I supposed that it was ITV the correct firmware, but not 100% sure...
I'm just sure that it is no-brand.

Drake9090 said:
I was thinking about a possible cause: could it be that I'm using a wrong firmware?
this device is used, so I supposed that it was ITV the correct firmware, but not 100% sure...
I'm just sure that it is no-brand.
Click to expand...
Click to collapse
Screenshots of "phone info samsung" app please.
"If someone helps, never forget to hit thanks ?"

When you flash the Odin firmware it's succesfull?

DeepankarS said:
Screenshots of "phone info samsung" app please.
"If someone helps, never forget to hit thanks ?"
Click to expand...
Click to collapse
The only info that I'm able to see are the ones in download mode...
If the phone don't boot any firmware, how can I use that app?

Lennyz1988 said:
When you flash the Odin firmware it's succesfull?
Click to expand...
Click to collapse
Yes, or better to say, Odin says PASS, but when I reboot (even with or without Auto-Reboot flag) the phone stucks on Samsung Logo saying Recovery Booting.

DeepankarS said:
The pit file is right there in @samersh72s thread
In the attachments.
Flash properly after reading the OP very carefully and DO NOT SKIP ANY STEP OR MODIFY any
Still IMHO a data wipe after reflashing can fix your bootloop.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Drake9090 said:
Yes, or better to say, Odin says PASS, but when I reboot (even with or without Auto-Reboot flag) the phone stucks on Samsung Logo saying Recovery Booting.
Click to expand...
Click to collapse
On top of all advice given here...
Can you boot at all? what is the status at the moment , rom recovery?
I would try to flash a recovery first ( twrp , philz) see if it works , do a factory reset ( backup first) and try flashing a stock rom,,see if it helps

MAX 404 said:
On top of all advice given here...
Can you boot at all? what is the status at the moment , rom recovery?
I would try to flash a recovery first ( twrp , philz) see if it works , do a factory reset ( backup first) and try flashing a stock rom,,see if it helps
Click to expand...
Click to collapse
The situation is still the same, so in order:
I cannot boot a complete system, I just stuck on samsung i9505 logo with blue "Recovery Booting" written in top-left on the screen;
At the moment I'm reflashing ossessively the stock rom, and philz touch; I can go in DL mode and not in the stock recovery, but when I flash philz touch I can enter by double clicking vol up when I see the blue, red and yellow writes.
I cannot do a factory reset, that is the real problem I suppose, 'cause when I enter in philz recovery, it says: "error mount /data etc etc..." as you can see in previous posts.
In DL mode this is the situation:
PN: GT-I9505
Current binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
csb-config-lsb: 0x30
write prot: enabled
eMMC Burst mode enabled

Drake9090 said:
The situation is still the same, so in order:
I cannot boot a complete system, I just stuck on samsung i9505 logo with blue "Recovery Booting" written in top-left on the screen;
At the moment I'm reflashing ossessively the stock rom, and philz touch; I can go in DL mode and not in the stock recovery, but when I flash philz touch I can enter by double clicking vol up when I see the blue, red and yellow writes.
I cannot do a factory reset, that is the real problem I suppose, 'cause when I enter in philz recovery, it says: "error mount /data etc etc..." as you can see in previous posts.
In DL mode this is the situation:
PN: GT-I9505
Current binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
csb-config-lsb: 0x30
write prot: enabled
eMMC Burst mode enabled
Click to expand...
Click to collapse
Lets go one step at the time.........forget about recovery for now
Flashing with Odin a stock rom ( use same rom you had before or newer) , what happen? did you followed the guide
http://forum.xda-developers.com/show....php?t=2265477 that @DeepankarS suggested ? did you flash the PIT file?

MAX 404 said:
Lets go one step at the time.........forget about recovery for now
Flashing with Odin a stock rom ( use same rom you had before or newer) , what happen? did you followed the guide
http://forum.xda-developers.com/show....php?t=2265477 that @DeepankarS suggested ? did you flash the PIT file?
Click to expand...
Click to collapse
Followed that guide many times, but the result is stuck in Samsung Logo.
Even tried flashing PIT file, but nothing changed.
maybe flash just a stock recovery after the firmware could solve the problem?

SM-T531 looks like bricked.

hi guys.
i recently installed a new unofficial rom that the starter @sub77 said it might be compatible with SM-T531 too.after installing it now when i try to flash anything using odin it says fail after recovery.img file.
i downloaded an official firmware two times and recently an unofficial one but error still exists.
i tryed a pit file that re-partition my device and after restart i'm saw no changes.
i have TWRP too but it can do anything and say's Internal Storage have 0 MB Space at all.
anyone can help please?
i'll be happy if someone give me another .pit file for this version of android i had.

Michaelbin said:
hi guys.
i recently installed a new unofficial rom that the starter @sub77 said it might be compatible with SM-T531 too.after installing it now when i try to flash anything using odin it says fail after recovery.img file.
i downloaded an official firmware two times and recently an unofficial one but error still exists.
i tryed a pit file that re-partition my device and after restart i'm saw no changes.
i have TWRP too but it can do anything and say's Internal Storage have 0 MB Space at all.
anyone can help please?
i'll be happy if someone give me another .pit file for this version of android i had.
Click to expand...
Click to collapse
I wouldnt flash firmware that "might" work on your device or is build for another rom.... you should try reinstalling drivers and flash stock rom thru odin, if it wont work try twrp 3.0.0 if it detects your storage....

thelous said:
I wouldnt flash firmware that "might" work on your device or is build for another rom.... you should try reinstalling drivers and flash stock rom thru odin, if it wont work try twrp 3.0.0 if it detects your storage....
Click to expand...
Click to collapse
i'm taking risks for testing on last android version and i didn't know it's not built for my model number cause in title said for SM-T530 and SM-T531. it was work but with lag. i'm not an amateur.
i tried flashing an stock rom but odin says fail. TWRP says 0 MB Storage and i couldn't find any zip rom.

Michaelbin said:
i'm taking risks for testing on last android version and i didn't know it's not built for my model number cause in title said for SM-T530 and SM-T531. it was work but with lag. i'm not an amateur.
i tried flashing an stock rom but odin says fail. TWRP says 0 MB Storage and i couldn't find any zip rom.
Click to expand...
Click to collapse
Select your T531 service LP firmware unpack and flash via Odin .
He-he! Sorry forgot to give link http://forum.xda-developers.com/tab-4/general/kklp-service-firmwares-sm-t530-sm-t531-t3158803

repey6 said:
Select your T531 service LP firmware unpack and flash via Odin .
He-he! Sorry forgot to give link http://forum.xda-developers.com/tab-4/general/kklp-service-firmwares-sm-t530-sm-t531-t3158803
Click to expand...
Click to collapse
Thanks.i'll download and test the link and i hope work cause only thing i could flash last times was TWRP.:crying:

do a full wipe before flashing stock and my roms cant brick a ****, they dont flash bootloaders and they also wont repartition your tab - the starter!
the error is allmost sitting in front of the device.

sub77 said:
do a full before flashing stock and my roms cant brick a ****, they dont flash bootloaders and they also wont repartition your tab - the starter!
the error is allmost sitting in front of the device.
Click to expand...
Click to collapse
Dear @sub77 i didn't meant to say your rom is bad or..... and i meant of "The Starter" was the "Developer of that rom that can help" an i said you can give me a way to fix it.
do a full ? i didin't got what you mean.
so what i can do now?

full wipe, sorry. and the rom may be bad but it really cant brick it.

Sorry
sub77 said:
full wipe, sorry. and the rom may be bad but it really cant brick it.
Click to expand...
Click to collapse
Dear sub77 thanks for your help.
i think i really gonna say i'm so much sorry about using "brick" and connect it to your topic.i'm really sorry about this , you're a great developer and your roms are great, man.

Michaelbin said:
Dear sub77 thanks for your help.
i think i really gonna say i'm so much sorry about using "brick" and connect it to your topic.i'm really sorry about this , you're a great developer and your roms are great, man.
Click to expand...
Click to collapse
@sub77
i'm sorry again.how to perform a full wipe?

Michaelbin said:
@sub77
i'm sorry again.how to perform a full wipe?
Click to expand...
Click to collapse
Go into TWRP, choose wipe, then choose the advanced wipe option. Wipe system, data, cache, and dalvik. Make sure you have a ROM to flash after you do so, this will remove the operating system

Has this guy solved? Since he can boot into twrp where it should be the problem? I ve seen some posts and some step is missing... if twrp says 0mb storage, are u sure u selected the right storage?

thanks for helping.
TWRP recently couldn't access any storage on device and recently not coming up by pressing power + volume up + home
i tried to flash TWRP again but nothing changed.

pincopallowfs said:
Has this guy solved? Since he can boot into twrp where it should be the problem? I ve seen some posts and some step is missing... if twrp says 0mb storage, are u sure u selected the right storage?
Click to expand...
Click to collapse
thisisapoorusernamechoice said:
Go into TWRP, choose wipe, then choose the advanced wipe option. Wipe system, data, cache, and dalvik. Make sure you have a ROM to flash after you do so, this will remove the operating system
Click to expand...
Click to collapse
@thisisapoorusernamechoice
Oops. i must edit the last post for mention but i chose wrong butto. sorry

you told you did a repartition, how? you should try to make full wipe and flash a stock rom with odin, with repartition.

i downloaded this and flashed it.after that i flashed TWRP using Odin.then i tried again to flash a rom or boot to TWRP.
still trying.

Michaelbin said:
i downloaded this and flashed it.after that i flashed TWRP using Odin.then i tried again to flash a rom or boot to TWRP.
still trying.
Click to expand...
Click to collapse
After flashing TWRP you boot to TWRP ? If no reflash TWRP without autoreboot in Odin . Go manually to TWRP

repey6 said:
After flashing TWRP you boot to TWRP ? If no reflash TWRP without autoreboot in Odin . Go manually to TWRP
Click to expand...
Click to collapse
No Power + Volume Down + Home is not working.how to go on to TWRP manually?

Michaelbin said:
No Power + Volume Down + Home is not working.how to go on to TWRP manually?
Click to expand...
Click to collapse
need USB debuging

repey6 said:
need USB debuging
Click to expand...
Click to collapse
can you help me more about what you saying ? do you mean ADB ? i will search more about this...

Help with note 3 9005 loop booting

Hil
I have a similar problem. I have a note 3 with original UK ROM and wanted to flash my operator ROM to get wifi calling. Both are android 5.0
The problem is after trying to flash the first time I had a problem that the new ROM would not fully flash. reading posts I understood I had to flash PIT file which I downloaded and flashed. After flashing PIT the new ROM did not go in so I flashed my original UK.
After reboot I kept getting security warnings that something has changed and I should reboot. After several boots the problem did not go away.
So I tried to flash ROM again, different tries between UK ROM and my operator ROM, but the phone now only loops at booting. Sometimes it gets stuck at first Samsung screen.
Can anyone please help?
Thank you

What original rom.
What rom you updated to ?
Probable you flashed the wrong size PIT .

JJEgan said:
What original rom.
What rom you updated to ?
Probable you flashed the wrong size PIT .
Click to expand...
Click to collapse
Hi,
So the following:
Original ROM: N9005XXUGBOK6_N9005BTUGBOJ1_BTU
My operator (EE): N9005XXUGBPB1_N9005EVRGBPB1_EVR
Now I tried: 4.4.2.N9005XXUGNG1_N9005OXAGNG1_BTU
I tried the following PITS:
SM-N9005 FTM pit
SM-G900F EVR pit
Any suggestions, would be very grateful.
Thanks

SM-G900F EVR pit
Thats not for N9005 .
Have you tried Samsungs KIES ??

So which Pit to rectify?
Yes I also tried Kies 3 but cannot connect. I have tried under recovery mode and download mode. Odin connects fine though. Not sure why.

SEE
https://forum.xda-developers.com/galaxy-note-3/help/flash-fail-pit-file-n9005evrgbpb1-help-t3384109
If you have N9005 32GB only

Try to change usb cords. I used to have the same problem

JJEgan said:
SEE
https://forum.xda-developers.com/galaxy-note-3/help/flash-fail-pit-file-n9005evrgbpb1-help-t3384109
If you have N9005 32GB only
Click to expand...
Click to collapse
So I flashed the pit successfully, but the EVR ROM failed again.
Any suggestions on why?

bobby121418 said:
So I flashed the pit successfully, but the EVR ROM failed again.
Any suggestions on why?
Click to expand...
Click to collapse
I just flashed my original UK ROM successfully, however after a boot where the message appeared "Recovery booting" then the green Android followed by another reset. It is however stuck on the Samsung screen.

bobby121418 said:
I just flashed my original UK ROM successfully, however after a boot where the message appeared "Recovery booting" then the green Android followed by another reset. It is however stuck on the Samsung screen.
Click to expand...
Click to collapse
Anyone has any suggestions?

bobby121418 said:
Anyone has any suggestions?
Click to expand...
Click to collapse
From closed thread .
You changed to the wrong model firmware and that's a guess as you give no indication .
Another guess is that you ticked the wrong boxes in Odin .

JJEgan said:
From closed thread .
You changed to the wrong model firmware and that's a guess as you give no indication .
Another guess is that you ticked the wrong boxes in Odin .
Click to expand...
Click to collapse
Ok sorry, they were in the begining of the thread but here they are. I tried both and still no result:
Original ROM: N9005XXUGBOK6_N9005BTUGBOJ1_BTU
My operator (EE): N9005XXUGBPB1_N9005EVRGBPB1_EVR
Thanks

There was no beginning details in your closed thread .
Another guess is that you ticked the wrong boxes in Odin .

JJEgan said:
There was no beginning details in your closed thread .
Another guess is that you ticked the wrong boxes in Odin .
Click to expand...
Click to collapse
I have chosen the two boxes mentioned in most places about how to use odin:
Auto Reboot and
"F.Reset Time
Any other suggestions?

Search bootloop
https://forum.xda-developers.com/search/forum/2494?query=Bootloop
Take it to a repair centre .
Personally i would try flashing TWRP via Odin recovery and see if i could get to recovery mode.

JJEgan said:
Search bootloop
https://forum.xda-developers.com/search/forum/2494?query=Bootloop
Take it to a repair centre .
Personally i would try flashing TWRP via Odin recovery and see if i could get to recovery mode.
Click to expand...
Click to collapse
Thanks I will search the link.
Just to let you know I can get to recovery mode now.
What can I do in recovery mode?

bobby121418 said:
Thanks I will search the link.
Just to let you know I can get to recovery mode now.
What can I do in recovery mode?
Click to expand...
Click to collapse
Factory reset .
Then flash stock rom .
That fails i would try flashing a custom rom through recovery .

JJEgan said:
Factory reset .
Then flash stock rom .
That fails i would try flashing a custom rom through recovery .
Click to expand...
Click to collapse
I installed TWRP 3.1.1 as per link above and tried to backup my DATA partition but it is 0MB
I'm afraid Factory reset also failed. I get a bunch of error messages such as:
Failed to mount /data
Formatting cache
Unable to mount storage
Any ideas?
The good news is I still have access to recovery and download.