Related
ok i have galaxy tab.
i can flash with odin and heimdall.
but when i flash the rom it stucks at Galaxy Tab screen.
i searched everything and i found the problem that there is no recovery image.
how can i flash recovery image with odin or heimdall ?
ADB PUSH doesnt work.
Kies doesnt work.
Hey bro...had the same issue but after flashing my rom 5× and pulling all my hait off i ended up jus saying f it and did a factory reset after flashing and it worked...hold the volume up while botting and then do a wipe of data not cache
Sent from my GT-P1000 using XDA App
it may be work IF HAVE RECOVERY in my device...
i cant enter recovery never...
www.cepdukkani.net said:
it may be work IF HAVE RECOVERY in my device...
i cant enter recovery never...
Click to expand...
Click to collapse
Your best bet is probably to flash the MoDaCo kernel, which will give you CWM recovery. Unless you want to convert to EXT4 right now, you should probably use the RFS version.
Regards,
Dave
i checked 3 - 4 firmwares same error.
i check
adb devices
Result :
xxxxxxxxx RECOVERY
adb shell
Result :
- exec '/system/bin/sh' failed: No such file or directory (2) -
Any ideas ?
try flashing with heimdall and putting the kernal in to both the kernal and recovery image spots...
TheAdmira1 said:
try flashing with heimdall and putting the kernal in to both the kernal and recovery image spots...
Click to expand...
Click to collapse
stucked at %100
I have TWRP'd my MK2 build SGH-i337. Which now as i am reading kills recovery on the locked bootloader.
I have seen a bunch of threads getting people odin'd back to MF3 using the MF3.tar file, but i have tried this and it fails every time. I am guessing from what i am reading that i cant go back to MF3. Is there a mk2 stock tar file i can odin? I cant ADB or flash via recovery, at this point Odin seems to be my only option for interaction with the phone.
I have also seen people taking these phones up to Best Buy to use SMART tool from Samsung. Is this my only hope? This is my work phone and kinda feeling a little regretful at the moment, so can anyone can confirm my options at this point?
I know this is similar to previous posts about mf3 twrp'd phones but i didn't see anything about mk2, so sorry in advanced if this is to similar and i am missing something.
Follow These Instructions
Follow these instructions.
skip the MJ9 sideload update part and replace with the at&t full mk2 update file. Search the forums for it. :good:
http://forum.xda-developers.com/showpost.php?p=47604388&postcount=152
---------- Post added at 03:54 PM ---------- Previous post was at 03:36 PM ----------
joshzdad2013 said:
Follow these instructions.
skip the MJ9 sideload update part and replace with the at&t full mk2 update file. Search the forums for it. :good:
http://forum.xda-developers.com/showpost.php?p=47604388&postcount=152
Click to expand...
Click to collapse
Here is more info on the MK2 update file.
http://forum.xda-developers.com/showpost.php?p=47998793&postcount=819
I was able to get to recovery
I am at recovery now but still do not see a full mk2 update. There is the update file for 4.3 i tried to side load that but received E:Error in //tmp/update.zip (status 7).
Is this the mk2 file you are referring to it is about 700 meg? I couldn't find anyone with a full stock mk2. Any suggestions from here?
Yes its the 700 meg one. Side load that. It worked for me. Put it on your sd card then in stock recovery sise load from external sd.
Clarification
Are you wanting me to do this with these fix files?
Download and extract the following files...
mf3-emergency-part-1.tar.md5.7z
mf3-emergency-part-2.tar.md5.7z
And then these steps with the mk2 instead of mj9 update file instead?
Start Odin, connect your phone and boot into Download mode.
Flash mf3-emergency-part-1.tar.md5 which contains modem.bin, NON-HLOS.bin and system.img.ext4.
The flash of system.img.ext4 WILL FAIL at the end. That's OK.
Reboot the phone back into Download mode and restart Odin.
Flash mf3-emergency-part-2.tar.md5 which contains cache.img.ext4.
The flash WILL FAIL at the end. That's OK.
The phone should now reboot to recovery by itself and apply a small update. If it fails, stop and report.
The phone should now reboot to a black screen with the pulsing notification LED.
Reboot into recovery mode and flash mk2update.zip. I recommend sideloading instead of flashing from sdcard because the sdcard method reboots the phone whether the update was successful or not and you lose the error messages.
Reboot the phone and let it initialize.
You should now have MK2.
Yes
---------- Post added at 07:10 PM ---------- Previous post was at 07:00 PM ----------
Just make sure your flashing that 700mb file its the full mk2 update.
I'm stuck in the same boat after TWRP....will only boot to odin. No recovery, if I try it ony goes to a screen where it says to hook it up to Kies and update firmware that way(doesn't work though because Kies tries to download MDL). Will not be able to attempt this method til I get home from work so I'm staying glued to this post in the meantime. Appreciate the updates!
What version of Odin are you using? I have the same problem and cant get past emergency part 2. Phone does not auto reboot after cache flash.
sl1200md3 said:
What version of Odin are you using? I have the same problem and cant get past emergency part 2. Phone does not auto reboot after cache flash.
Click to expand...
Click to collapse
I used Odin 1.85
joshzdad2013 said:
I used Odin 1.85
Click to expand...
Click to collapse
Same here. Thanks. Phone is still stuck after flashing mf3-emergency-part-2.tar. I try and manually reboot and it takes me back into Odin mode.
After flashing mf3-emergency-part-2.tar, phone hangs and says:
Odin Mode
Product Name: SGH-I337
Current Binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x0
CSB-CONFIG-LSB: 0x30
Write Protection: Enable
eMMC Burst Mode: enabled
Start [224,1440]
Bar [240,1440]
Secure Check Fail: cache
Just keep trying again, re-read the main post above. I literally sid it 3 times and it finally worked. I just kept reading thru the post till I found good info. Its in there ya just gotta find it.
Great Success Back at Stock!
I have gotten back to the stock from directions from gtj0, but big thanks to joshzdad2013 for leading me in the right directions :laugh::good:
Using Odin 3.07, I followed the directions except using the mk2 file 2400258.zip in the final adb sideload.
MK2 file
http://forum.xda-developers.com/show...&postcount=819
Also i forced reboot after step 6 by resetting odin and unplugging phone and plugging back in, then i just odin'd this file from this link
http://forum.xda-developers.com/showthread.php?t=1766399 Not sure if this helped any, but after forcing the reboot with the blank tar file it came back up in recovery and forced a small update. I then just used adb.exe to side load the 2400258.zip file after putting phone in adb sideload mode.
:good::good::good:
kevinpc said:
I have gotten back to the stock from directions from gtj0, but big thanks to joshzdad2013 for leading me in the right directions :laugh::good:
Using Odin 3.07, I followed the directions except using the mk2 file 2400258.zip in the final adb sideload.
MK2 file
http://forum.xda-developers.com/show...&postcount=819
Also i forced reboot after step 6 by resetting odin and unplugging phone and plugging back in, then i just odin'd this file from this link
http://forum.xda-developers.com/showthread.php?t=1766399 Not sure if this helped any, but after forcing the reboot with the blank tar file it came back up in recovery and forced a small update. I then just used adb.exe to side load the 2400258.zip file after putting phone in adb sideload mode.
:good::good::good:
Click to expand...
Click to collapse
That's awesome. . I managed to get the force reboot trick to work at Step 6. Now I'm at the blank screen flashing LED phase (Step 8). Better progress than where I was before, but I still cannot boot into recovery. I'll keep trying.
sl1200md3 said:
That's awesome. . I managed to get the force reboot trick to work at Step 6. Now I'm at the blank screen flashing LED phase (Step 8). Better progress than where I was before, but I still cannot boot into recovery. I'll keep trying.
Click to expand...
Click to collapse
Try flashing the recovery again after doing the emergency TAR's. I had to do that in order to fix mine, and then it restored nicely.
DeadlySin9 said:
Try flashing the recovery again after doing the emergency TAR's. I had to do that in order to fix mine, and then it restored nicely.
Click to expand...
Click to collapse
Thanks! :good: That got me back into Recovery mode. Now I'm getting Signature Verification Failed / Installation Aborted when I try and adb sideload this file http://forum.xda-developers.com/showpost.php?p=47998793&postcount=819 (2400258.zip) Looks like a bad download. Tried it twice.
I'm gonna try this file I found here http://forum.xda-developers.com/showthread.php?t=2573080 and see if that will work. DL is taking forever...
Nope. Both links didn't work. I'm also getting a CRC check error on both files if I try and unzip. Unexpected end of archive. Anyone know where I can get a good MK2 update file??
Got home and started with the instructions....flashed the first recovery-mj6.tar.md5 and the phone booted back up normally! I imagine that if I try to boot to recovery it'll soft brick again. Gonna leave it like this for now til the wife gets home and then see what happens.
SUCCESS!
Back on AT&T STOCK MK2 from a bricked TWRP'd install. I had to do the following:
1) Phone into download mode
2) Flash mf3-emergency-part-1.tar.md5 via Odin v1.85
3) Force Reboot
4) Flash mf3-emergency-part-2.tar.md5
5) Unplug phone / Reset Odin / plug phone back in
6) Flash recovery-mj6.tar.md5
7) Force Reboot in Odin using this file http://forum.xda-developers.com/showthread.php?t=1766399 Thanks kevinpc :good:
8) Manually enter recovery
9) ADB Sideload the file: update-mf3-mj9.zip found here: http://forum.xda-developers.com/showpost.php?p=47604388&postcount=152
10) ADB Sideload the file: update-MJ9-MK2.zip found here: https://docs.google.com/file/d/0B2iXrnZBB-MVYkYwNkYzU2FJaFk/edit
11) Reboot
Won't be flashing TWRP via Goo Manager again any time soon.
:good::good::good:
sl1200md3 said:
Back on AT&T STOCK MK2 from a bricked TWRP'd install. I had to do the following:
1) Phone into download mode
2) Flash mf3-emergency-part-1.tar.md5 via Odin v1.85
3) Force Reboot
4) Flash mf3-emergency-part-2.tar.md5
5) Unplug phone / Reset Odin / plug phone back in
6) Flash recovery-mj6.tar.md5
7) Force Reboot in Odin using this file http://forum.xda-developers.com/showthread.php?t=1766399 Thanks kevinpc :good:
8) Manually enter recovery
9) ADB Sideload the file: update-mf3-mj9.zip found here: http://forum.xda-developers.com/showpost.php?p=47604388&postcount=152
10) ADB Sideload the file: update-MJ9-MK2.zip found here: https://docs.google.com/file/d/0B2iXrnZBB-MVYkYwNkYzU2FJaFk/edit
11) Reboot
Won't be flashing TWRP via Goo Manager again any time soon.
:good::good::good:
Click to expand...
Click to collapse
Went ahead and completed using this method. PERFECT! Can't thank all of you enough!:good::good:
You guys are all lifesavers. This is gonna teach me to be more careful when flashing roms.
AT&T Galaxy S4
SGH-I337
I337UCUEMK2 (Android 4.3) - Official Samsung Version
I wanted to do a factory reset/cache clear on my phone in an attempt to fix lag experienced when using my phone which got really bad this morning, so I tried to boot into Recovery Mode (Volume Up + Home + Power). It acts like it's going to but then just goes strait into download mode and says "Downloading... Do not turn off target!!", not the normal warning about loading a custom OS and volume up to continue/down to cancel.
I've tried to flash the original ROM and even some custom ROMs using ODIN which keeps failing at the NAND write stage giving the FAIL (auth) error.
Now when booting my phone shows Samsung Custom with an open padlock but otherwise works fine.
At the top of the screen in download mode it says:
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOCK WARRANTY VOID: 0x0
CSB-CONFIG-LSB-0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
I couldn't find anything during some searches both on Google and here. What should I do?
Inviditas said:
AT&T Galaxy S4
SGH-I337
I337UCUEMK2 (Android 4.3) - Official Samsung Version
I wanted to do a factory reset/cache clear on my phone in an attempt to fix lag experienced when using my phone which got really bad this morning, so I tried to boot into Recovery Mode (Volume Up + Home + Power). It acts like it's going to but then just goes strait into download mode and says "Downloading... Do not turn off target!!", not the normal warning about loading a custom OS and volume up to continue/down to cancel.
I've tried to flash the original ROM and even some custom ROMs using ODIN which keeps failing at the NAND write stage giving the FAIL (auth) error.
Now when booting my phone shows Samsung Custom with an open padlock but otherwise works fine.
At the top of the screen in download mode it says:
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOCK WARRANTY VOID: 0x0
CSB-CONFIG-LSB-0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
I couldn't find anything during some searches both on Google and here. What should I do?
Click to expand...
Click to collapse
Sounds like you got yourself back to stock on the recovery..... just guessing here... not enough info to say for sure but.... I think if you look in the general thread you will find a thread pointing you to stock roms... to flash in odin... you need to have .tar files.... most custom roms are .zip to be flashed through recovery like cwm or twrp not odin... anyways... I see you have MK2 so try going here..... http://forum.xda-developers.com/showthread.php?t=2621279
Gage_Hero said:
Sounds like you got yourself back to stock on the recovery..... just guessing here... not enough info to say for sure but.... I think if you look in the general thread you will find a thread pointing you to stock roms... to flash in odin... you need to have .tar files.... most custom roms are .zip to be flashed through recovery like cwm or twrp not odin... anyways... I see you have MK2 so try going here..... http://forum.xda-developers.com/showthread.php?t=2621279
Click to expand...
Click to collapse
That worked perfectly, I can now boot into Recovery Mode. Point of interest however, it still shows "Samsung Custom" when turning on and I don't have an install ZIP option like there used to be in previous versions of Android. I also have a "E: failed to mount /sdcard (No such file or directory)" error at the bottom of the screen.
The last time I used recovery mode was on my Samsung Captivate several years ago, has it changed around?
Inviditas said:
That worked perfectly, I can now boot into Recovery Mode. Point of interest however, it still shows "Samsung Custom" when turning on and I don't have an install ZIP option like there used to be in previous versions of Android. I also have a "E: failed to mount /sdcard (No such file or directory)" error at the bottom of the screen.
The last time I used recovery mode was on my Samsung Captivate several years ago, has it changed around?
Click to expand...
Click to collapse
Glad that u got your phone back. .... Go to recovery. ...wipe/factory reset. ....reboot to system and then reboot again by pressing power menu. ....Do it two or three time to get stick. .. It should get you Samsung Galaxy S4 splash screen instead of custom. ...:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
Inviditas said:
That worked perfectly, I can now boot into Recovery Mode. Point of interest however, it still shows "Samsung Custom" when turning on and I don't have an install ZIP option like there used to be in previous versions of Android. I also have a "E: failed to mount /sdcard (No such file or directory)" error at the bottom of the screen.
The last time I used recovery mode was on my Samsung Captivate several years ago, has it changed around?
Click to expand...
Click to collapse
See post 11 here.... yes things have changed... just out of curiosity... did you root the phone? Anyway... before you do anything else... read.. once... twice ... three times... then read it again... I find if you don't read enough you end up in a bad way... If you are thinking about doing anything with your phone search in the forum.... someone else has probably already done it and you can see how it turned out before you try
ted77usa said:
Glad that u got your phone back. .... Go to recovery. ...wipe/factory reset. ....reboot to system and then reboot again by pressing power menu. ....Do it two or three time to get stick. .. It should get you Samsung Galaxy S4 splash screen instead of custom. ...:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
Click to expand...
Click to collapse
Awesome, thanks so much. No more Samsung Custom. Now I just need to figure out this "E: failed to mount /sdcard (No such file or directory)" thing and I'll be set. To the Google! It can't mount because there is no external SD card. For some reason I was thinking it was talking about the internal SD card.
Glad your up and running that's the way the forum is supposed to work......
Unclear of phone history.
Phone model: D803 Canadian
Current issue:
Can NOT go to download mode.
CAN go to TWRP mode ver 2.8.4.0 installed by pressing VOL + and VOL - and Power button, all 3!. Shows some chineese characters first before going into TWRP.
I am NOT able to flash custom roms (tried cm12-d803, aicp-kk-d803) I get assert failed: run_program("/system/bin/loki.s h") == 0
I have tried the instructions here http://forum.xda-developers.com/showthread.php?t=2620733 [[SOLUTION] LG G2 VS98012b Problems With Loki (loki.sh) + [ROM][UNOFFICIAL]CM10.2], but no go..
How can I fix this?
Hello.. BUMp! I have access to ADB in TWRP mode..
SaHiLzZ said:
Hello.. BUMp! I have access to ADB in TWRP mode..
Click to expand...
Click to collapse
Did you tryed to cleanflash? Btw why is your download mode missing
It shows chinese characters before going to twrp. I don't get it why it is like that
Does it show the chinese characters and then boots into twrp? If so maybe try to flash also later 2.8.4.0 recovery from blastagator.
Try to google the right rom for the D803 Canadian version cause I've read that some D803 models need to flash roms from another model instead.
wulsic said:
Did you tryed to cleanflash? Btw why is your download mode missing
It shows chinese characters before going to twrp. I don't get it why it is like that
Does it show the chinese characters and then boots into twrp? If so maybe try to flash also later 2.8.4.0 recovery from blastagator.
Try to google the right rom for the D803 Canadian version cause I've read that some D803 models need to flash roms from another model instead.
Click to expand...
Click to collapse
I have tried couple of D803 roms, CM12, AICP KK.. they fail with the assert error for loki.
How to fix this. I am on 2.8.4.0 TWRP version.
SaHiLzZ said:
I have tried couple of D803 roms, CM12, AICP KK.. they fail with the assert error for loki.
How to fix this. I am on 2.8.4.0 TWRP version.
Click to expand...
Click to collapse
Well maybe outdated loki or yeah I can't tell you the truth exactly, Ehhm... Maybe you have to flash the bootloader files again? Try to find bootloader files for your phone in a flashable zip. Maybe that works
First try to find alternative things before what I said about the bootloader, cause flashing the wrong things can harm it.
wulsic said:
Well maybe outdated loki or yeah I can't tell you the truth exactly, Ehhm... Maybe you have to flash the bootloader files again? Try to find bootloader files for your phone in a flashable zip. Maybe that works
First try to find alternative things before what I said about the bootloader, cause flashing the wrong things can harm it.
Click to expand...
Click to collapse
FIXED!
I borked it further by trying to install older recovery using dd command while in TWRP. Ended up with secure boot error ONLY when I try to press all three buttons, and then I get QDLOAD_BULK in device manager. Device continues to boot normally if I press the power button.
Tried to use http://forum.xda-developers.com/showthread.php?t=2582142 [FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2, but wouldn't work in Ubuntu. Drives kept disappearing after showing up momentarily. NOT the case in Windows. So used http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627 Windows application, and selected D802, it failed on a few items, but gave me download mode and Security Error on normal boot.
Used LG Flash tool KDZ flasher to flash v20 Rogers, but failed at 40%. Tried again, still failed.
Used LG TOT Flash tool, and was successful!
@SaHiLzZ Nice that you fixed your problem on your own:good: Have fun further with it:laugh:
This is the first time I'm rooting my phone. Process went smooth upto granting Super user excess to RashR (Flash Tool). And Download Philz Recovery Zip. After that I can only see Samsung Logo. Please Help!
PS: It's not going into Recovery Mode.
What S5 variant do you have and what version of Android are you running?
InsanePostman said:
What S5 variant do you have and what version of Android are you running?
Click to expand...
Click to collapse
G900H. Lollipop. I used Odin with this file - CF-Auto-Root-k3g-k3gxx-smg900h.tar (the process I used for rooting). It has come out of boot sleep. When I'm trying to go into recovery mode, it gets stuck at Logo. My phone is working right now but doesn't go into recovery mode. Can you help me solve this? I want to try Marshmallow. Thanks!
make sure the MD5 hash matches, if you don't know how to hash MD5 look it up, if it fails just redownload the recovery tar because your download was corrupted
---------- Post added at 02:48 PM ---------- Previous post was at 02:48 PM ----------
and don't use download managers
complexiscool said:
G900H. Lollipop. I used Odin with this file - CF-Auto-Root-k3g-k3gxx-smg900h.tar (the process I used for rooting). It has come out of boot sleep. When I'm trying to go into recovery mode, it gets stuck at Logo. My phone is working right now but doesn't go into recovery mode. Can you help me solve this? I want to try Marshmallow. Thanks!
Click to expand...
Click to collapse
Try to flash TWRP recovery
Use ODIN to flash recovery, not some flash tool from G Play, it might have flashed the wrong version recovery
With ODIN, you do it manually, so if you flash the wrong version, it's because you didn't check it first, not because you let some random app do it for you
*Detection* said:
Use ODIN to flash recovery, not some flash tool from G Play, it might have flashed the wrong version recovery
With ODIN, you do it manually, so if you flash the wrong version, it's because you didn't check it first, not because you let some random app do it for you
Click to expand...
Click to collapse
Hi,
Can you please refer a link which I can follow. I followed steps from a youtube video(with a good number of likes and views) which lead to this. I've zero experience in rooting and all. Any help will be highly appreciated. Thanks!
complexiscool said:
Hi,
Can you please refer a link which I can follow. I followed steps from a youtube video(with a good number of likes and views) which lead to this. I've zero experience in rooting and all. Any help will be highly appreciated. Thanks!
Click to expand...
Click to collapse
Loads of guides kicking about here in the S5 forum
Basically grab TWRP 2.8.7.0 .TAR for your model S5, load it into the AP or PDA section of ODIN, put your phone in download mode (Vol down & Home & Power from a powered off state), connect phone to PC USB, make sure drivers are installed, then hit start on ODIN
It should start the flashing process, and say success once done
*Detection* said:
Loads of guides kicking about here in the S5 forum
Basically grab TWRP 2.8.7.0 .TAR for your model S5, load it into the AP or PDA section of ODIN, put your phone in download mode (Vol down & Home & Power from a powered off state), connect phone to PC USB, make sure drivers are installed, then hit start on ODIN
It should start the flashing process, and say success once done
Click to expand...
Click to collapse
I tried using Odin and nothing happened. Tried using TWRP Manager. Getting this error - "Either you already have this recovery installed or another error has occured. Would you like to attempt rebooting to recovery now?"
complexiscool said:
I tried using Odin and nothing happened. Tried using TWRP Manager. Getting this error - "Either you already have this recovery installed or another error has occured. Would you like to attempt rebooting to recovery now?"
Click to expand...
Click to collapse
What do you mean, nothing happened with ODIN?
Did you add the TWRP .TAR (Do not extract)?
Phone was in download mode?
Drivers were installed?
Could ODIN see the phone? Did it show the COM port at the top?
*Detection* said:
What do you mean, nothing happened with ODIN?
Did you add the TWRP .TAR (Do not extract)?
Phone was in download mode?
Drivers were installed?
Could ODIN see the phone? Did it show the COM port at the top?
Click to expand...
Click to collapse
1. I meant when I clicked on Start, a blue bar came in download mode, and phone restarted.
2. Yes
3. Yes
4. Yes
complexiscool said:
1. I meant when I clicked on Start, a blue bar came in download mode, and phone restarted.
2. Yes
3. Yes
4. Yes
Click to expand...
Click to collapse
OK, a common problem
Uncheck the "Auto reboot" setting in ODIN
When it's finished flashing, unplug the phone and pull the battery out of the phone, replace it, and boot straight into recovery with vol up, Home and Power