ok i have galaxy tab.
i can flash with odin and heimdall.
but when i flash the rom it stucks at Galaxy Tab screen.
i searched everything and i found the problem that there is no recovery image.
how can i flash recovery image with odin or heimdall ?
ADB PUSH doesnt work.
Kies doesnt work.
Hey bro...had the same issue but after flashing my rom 5× and pulling all my hait off i ended up jus saying f it and did a factory reset after flashing and it worked...hold the volume up while botting and then do a wipe of data not cache
Sent from my GT-P1000 using XDA App
it may be work IF HAVE RECOVERY in my device...
i cant enter recovery never...
www.cepdukkani.net said:
it may be work IF HAVE RECOVERY in my device...
i cant enter recovery never...
Click to expand...
Click to collapse
Your best bet is probably to flash the MoDaCo kernel, which will give you CWM recovery. Unless you want to convert to EXT4 right now, you should probably use the RFS version.
Regards,
Dave
i checked 3 - 4 firmwares same error.
i check
adb devices
Result :
xxxxxxxxx RECOVERY
adb shell
Result :
- exec '/system/bin/sh' failed: No such file or directory (2) -
Any ideas ?
try flashing with heimdall and putting the kernal in to both the kernal and recovery image spots...
TheAdmira1 said:
try flashing with heimdall and putting the kernal in to both the kernal and recovery image spots...
Click to expand...
Click to collapse
stucked at %100
Related
logo_q1.jpg daw failed [BRICKED] please help
I flashed a GB ROM using odin mobile trying revert from ICS after I found out about the possible superbrick, when it rebooted, all I saw was logo_q1.jpg daw failed in green letters
I can get into recovery, and can only flash SGN_XX_OXA_KJ1_FACTORYFS, but same thing after it finishes.
PLEASE HELP!!!
ok i finally got the green jpg failed error to go by flashing Abyss kernel. but now it just gives me a yellow triangle and CWM, but CMW is unable as it is stuck in boot loop.
Use PC ODIN to flash a stock GB rom!! Put in PDA section of ODIN. Well, just follow instructions in Drketan's thread in Android Development section.
**PC ODIN calls for Download Mode, I assume you can get to it because you can get to recovery (download mode is Volume Down)**
BOOM
i was able to flash a stock rom and get it working, i was figured it out right before you posted.
thanks
now I have to fix the green logo_q1.jpg draw failed. but it doesnt boot into the rom
DJTJ said:
i was able to flash a stock rom and get it working, i was figured it out right before you posted.
thanks
now I have to fix the green logo_q1.jpg draw failed. but it doesnt boot into the rom
Click to expand...
Click to collapse
After you ODIN the stock GB rom it should boot up fine. If it doesn't, boot into recovery (on the STOCK GB) rom and wipe data and cache. This will ensure you are starting fresh and getting rid whatever that green logo fail is. I'm not sure what that is.
This is the first time I'm rooting my phone. Process went smooth upto granting Super user excess to RashR (Flash Tool). And Download Philz Recovery Zip. After that I can only see Samsung Logo. Please Help!
PS: It's not going into Recovery Mode.
What S5 variant do you have and what version of Android are you running?
InsanePostman said:
What S5 variant do you have and what version of Android are you running?
Click to expand...
Click to collapse
G900H. Lollipop. I used Odin with this file - CF-Auto-Root-k3g-k3gxx-smg900h.tar (the process I used for rooting). It has come out of boot sleep. When I'm trying to go into recovery mode, it gets stuck at Logo. My phone is working right now but doesn't go into recovery mode. Can you help me solve this? I want to try Marshmallow. Thanks!
make sure the MD5 hash matches, if you don't know how to hash MD5 look it up, if it fails just redownload the recovery tar because your download was corrupted
---------- Post added at 02:48 PM ---------- Previous post was at 02:48 PM ----------
and don't use download managers
complexiscool said:
G900H. Lollipop. I used Odin with this file - CF-Auto-Root-k3g-k3gxx-smg900h.tar (the process I used for rooting). It has come out of boot sleep. When I'm trying to go into recovery mode, it gets stuck at Logo. My phone is working right now but doesn't go into recovery mode. Can you help me solve this? I want to try Marshmallow. Thanks!
Click to expand...
Click to collapse
Try to flash TWRP recovery
Use ODIN to flash recovery, not some flash tool from G Play, it might have flashed the wrong version recovery
With ODIN, you do it manually, so if you flash the wrong version, it's because you didn't check it first, not because you let some random app do it for you
*Detection* said:
Use ODIN to flash recovery, not some flash tool from G Play, it might have flashed the wrong version recovery
With ODIN, you do it manually, so if you flash the wrong version, it's because you didn't check it first, not because you let some random app do it for you
Click to expand...
Click to collapse
Hi,
Can you please refer a link which I can follow. I followed steps from a youtube video(with a good number of likes and views) which lead to this. I've zero experience in rooting and all. Any help will be highly appreciated. Thanks!
complexiscool said:
Hi,
Can you please refer a link which I can follow. I followed steps from a youtube video(with a good number of likes and views) which lead to this. I've zero experience in rooting and all. Any help will be highly appreciated. Thanks!
Click to expand...
Click to collapse
Loads of guides kicking about here in the S5 forum
Basically grab TWRP 2.8.7.0 .TAR for your model S5, load it into the AP or PDA section of ODIN, put your phone in download mode (Vol down & Home & Power from a powered off state), connect phone to PC USB, make sure drivers are installed, then hit start on ODIN
It should start the flashing process, and say success once done
*Detection* said:
Loads of guides kicking about here in the S5 forum
Basically grab TWRP 2.8.7.0 .TAR for your model S5, load it into the AP or PDA section of ODIN, put your phone in download mode (Vol down & Home & Power from a powered off state), connect phone to PC USB, make sure drivers are installed, then hit start on ODIN
It should start the flashing process, and say success once done
Click to expand...
Click to collapse
I tried using Odin and nothing happened. Tried using TWRP Manager. Getting this error - "Either you already have this recovery installed or another error has occured. Would you like to attempt rebooting to recovery now?"
complexiscool said:
I tried using Odin and nothing happened. Tried using TWRP Manager. Getting this error - "Either you already have this recovery installed or another error has occured. Would you like to attempt rebooting to recovery now?"
Click to expand...
Click to collapse
What do you mean, nothing happened with ODIN?
Did you add the TWRP .TAR (Do not extract)?
Phone was in download mode?
Drivers were installed?
Could ODIN see the phone? Did it show the COM port at the top?
*Detection* said:
What do you mean, nothing happened with ODIN?
Did you add the TWRP .TAR (Do not extract)?
Phone was in download mode?
Drivers were installed?
Could ODIN see the phone? Did it show the COM port at the top?
Click to expand...
Click to collapse
1. I meant when I clicked on Start, a blue bar came in download mode, and phone restarted.
2. Yes
3. Yes
4. Yes
complexiscool said:
1. I meant when I clicked on Start, a blue bar came in download mode, and phone restarted.
2. Yes
3. Yes
4. Yes
Click to expand...
Click to collapse
OK, a common problem
Uncheck the "Auto reboot" setting in ODIN
When it's finished flashing, unplug the phone and pull the battery out of the phone, replace it, and boot straight into recovery with vol up, Home and Power
Today i was trying to install the Android Marshmallow 6.0.1 on my Galaxy S5 Snapdragon via Odin, i downloaded the firmware from Sammobile, i verified that the phone model was exactly the same as named on the firmware, i place the .md5 file in the AP slot and everything was ready to go! (The phone was already plugged and in Bootloader mode, and drivers were up to date) then when finishing the flash Odin FAILS to complete the flash and the phone is left with nothing than the Download mode, i panic and try to access recovery mode but realize that there´s no recovery....I proceed to install the recovery.tar into my phone and it works, i start the phone and Samsung logo comes up, finally it loads and does al the process after you flash a Samsung phone.
Everything works just fine!...except for one thing, THERE´S NO RECOVERY!!!. The phone works perfectly but when i try to enter recovery mode, it sends me to Odin mode as it displays a message saying that failed to boot into recovery.
Please help me i don´t know what to do.
Thanks!
Just flash a custom recovery like twrp or cwm
Already did...same problem, recovery won't boot
adavicco said:
Already did...same problem, recovery won't boot
Click to expand...
Click to collapse
You need to flash a pit file to complete the install correctly.
hello
i messed up with my device and i can't mount any of the partitions nor unable to enter into the download mode to flash stock rom...
Even "adb reboot download" too not working...
Fastboot mode is working...
Can flash into twrp but unable to mount partitions.... So unable to flash custom roms...
please help me...
Thank You....
princemouli said:
hello
i messed up with my device and i can't mount any of the partitions nor unable to enter into the download mode to flash stock rom...
Even "adb reboot download" too not working...
Fastboot mode is working...
Can flash into twrp but unable to mount partitions.... So unable to flash custom roms...
please help me...
Thank You....
Click to expand...
Click to collapse
Press VOL UP along with POWER KEY and release power key once the lenovo logo shows, while still pressing the VOL UP. This will boot into DOWNLOAD MODE
sasukay said:
Press VOL UP along with POWER KEY and release power key once the lenovo logo shows, while still pressing the VOL UP. This will boot into DOWNLOAD MODE
Click to expand...
Click to collapse
Thanks for ur reply...
I tried it but still unable to boot into download mode...
princemouli said:
Thanks for ur reply...
I tried it but still unable to boot into download mode...
Click to expand...
Click to collapse
Brother, I'm not exactly a expert in this case, but I cam suggest you a few hit n trials.
Boot into recovery, go to mount and click on system, data, cache, dalvik, etc.
If you've tried doing so, then go to advanced, then to terminal and type in "mount /system" and others. If still this doesn't work. Then better try the cwm recovery. The unable to mount system has happened to me, and that time CWM came to my rescue.
sasukay said:
Brother, I'm not exactly a expert in this case, but I cam suggest you a few hit n trials.
Boot into recovery, go to mount and click on system, data, cache, dalvik, etc.
If you've tried doing so, then go to advanced, then to terminal and type in "mount /system" and others. If still this doesn't work. Then better try the cwm recovery. The unable to mount system has happened to me, and that time CWM came to my rescue.
Click to expand...
Click to collapse
Can you please send me the link for CWM recovery...
Thank you
princemouli said:
Can you please send me the link for CWM recovery...
Thank you
Click to expand...
Click to collapse
HERE IT IS
is the download mode only available on lenovo stock rom ?
sasukay said:
HERE IT IS
Click to expand...
Click to collapse
Getting this error "FAILED (remote: dtb not found)"
princemouli said:
Getting this error "FAILED (remote: dtb not found)"
Click to expand...
Click to collapse
Try this instead:
Code:
fastboot boot cwm.img
sasukay said:
Try this instead:
Code:
fastboot boot cwm.img
Click to expand...
Click to collapse
did same....
still error...
princemouli said:
did same....
still error...
Click to expand...
Click to collapse
Bro, I did some research but couldn't find anything useful.
Have you tried booting into download mode by pressing VOL UP + POWER KEY and releasing power key once the logo shows up.
And, which recovery (with version) are you using.
sasukay said:
Bro, I did some research but couldn't find anything useful.
Have you tried booting into download mode by pressing VOL UP + POWER KEY and releasing power key once the logo shows up.
And, which recovery (with version) are you using.
Click to expand...
Click to collapse
Still unable to flash the stock rom....
try :
Code:
adb reboot bootloader
of course usb debugging must enabled and pc authorized.
sasukay said:
Try this instead:
Code:
fastboot boot cwm.img
Click to expand...
Click to collapse
brother tried many methods but non of them worked....
can you please upload the drivers u have used to flash the stock rom
also is there any method to restore this menu to enter into download mode (see the image in attachment) using fast boot mode....
princemouli said:
brother tried many methods but non of them worked....
can you please upload the drivers u have used to flash the stock rom
also is there any method to restore this menu to enter into download mode (see the image in attachment) using fast boot mode....
Click to expand...
Click to collapse
Bro I'll suggest you to get a twrp backup from somewhere and then restore it. I don't have bandwidth left, so you should ask some other user for this.
Also, you never told, how this all even started.
get the adb tools this link:
http://forum.xda-developers.com/lenovo-a6000/how-to/root-root-lenovo-a6000-plus-lollipop-t3199532
---------- Post added at 12:02 PM ---------- Previous post was at 12:02 PM ----------
get the adb tools this link:
http://forum.xda-developers.com/lenovo-a6000/how-to/root-root-lenovo-a6000-plus-lollipop-t3199532
sasukay said:
Bro, I did some research but couldn't find anything useful.
Have you tried booting into download mode by pressing VOL UP + POWER KEY and releasing power key once the logo shows up.
And, which recovery (with version) are you using.
Click to expand...
Click to collapse
Brother thanks for ur help , now iam able to enter into download mode ,
Now Can you please provide me the direct download link to the stock firmware which can be flashed through downloader 1.0.2...
princemouli said:
Brother thanks for ur help , now iam able to enter into download mode ,
Now Can you please provide me the direct download link to the stock firmware which can be flashed through downloader 1.0.2...
Click to expand...
Click to collapse
Glad to hear that.
I hope you are following THIS GUIDE at boycracked. All the drivers and other softwares are listed there along with the download links.
Do note, that you have to flash the ROW Firmware (after extracting) and not the Stock ROM. The ROW firmware is available for A6000 only (and not A6000 plus), so you have to use that only, FROM THIS LINK. You can choose any of the ROW firmware. Flashing A6000s firmware won't affect anything except that your recent app cleaner will show 1GB of total RAM (only for display...actually the whole 2GB is used).
Later. after you recover your phone, you can flash the stock ROM or any other custom ROM or maybe leave it like that...
sasukay said:
Glad to here that.
I hope you are following THIS GUIDE at boycracked. All the drivers and other softwares are listed there along with the download links.
Do note, that you have to flash the ROW Firmware (after extracting) and not the Stock ROM. The ROW firmware is available for A6000 only (and not A6000 plus), so you have to use that only, FROM THIS LINK. You can choose any of the ROW firmware. Flashing A6000s firmware won't affect anything except that your recent app cleaner will show 1GB of total RAM (only for display...actually the whole 2GB is used).
Later. after you recover your phone, you can flash the stock ROM or any other custom ROM or maybe leave it like that...
Click to expand...
Click to collapse
Brother still unable to write firmware ...
flashing started but it too not able to write firmware...
used both qpst and downloader
qpst given message that flashing is successful
and downloader got hanged after flashing start
but still unable to boot the phone....
princemouli said:
Brother still unable to write firmware ...
flashing started but it too not able to write firmware...
used both qpst and downloader
qpst given message that flashing is successful
and downloader got hanged after flashing start
but still unable to boot the phone....
Click to expand...
Click to collapse
Did you followed each and every step as in the tutorial I mentioned...??
The key point is that you should have correct drivers installed and your device in download mode should be detected in device manager on PC as Qualcomm Preloader Diagnostic Mode whatever...
And keep im mind that you have to extract the 7z ROW Firmware file.
I successfully rooted my phone but it got stuck in a bootloop when I restarted it.
I can't enter recovery mode or turn it off, all I can do is enter odin mode.
I have tried:
1. The AGQ5 fix (https://forum.xda-developers.com/ga...g-aqg5-fix-t3636857/post73032395#post73032395) it doesn't work.
2. Smart switch, it says my device is unsupported
Please help!
1- flash twrp again
2- flash stock rom with odin ( download mode )
you can reboot just with vol - + shut down B
you maybe installed the wrong version of twrp the latest one is for the new bootloader if you have the older bootloader install the last version
It doesn't boot into TWRP even after I flash it again
djisgod said:
you maybe installed the wrong version of twrp the latest one is for the new bootloader if you have the older bootloader install the last version
Click to expand...
Click to collapse
Sorry if I'm asking a question but how do I check my bootloader version? I just used the latest version (twrp-3.1.1-0-herolte.img.tar) from a site but I can't link it.
popmpopm said:
1- flash twrp again
2- flash stock rom with odin ( download mode )
you can reboot just with vol - + shut down B
Click to expand...
Click to collapse
It doesn't boot into TWRP even after I flash it again
Flash full stock in odin. Then you can try twrp again if you wish.
It worked, thanks so much for all your help. Words cannot describe how grateful I am.
help
osidaksjdmw said:
It worked, thanks so much for all your help. Words cannot describe how grateful I am.
Click to expand...
Click to collapse
help me
how can did you get to download
HELP ! S8 Wont BOOT !!
I have the same problme! I can flash Combination file and then its booting and I can go to recovery mode ,but after when I flash again STOCK rom succesfully ,S8 wont boot Any Idea what is going on ? Im on U2CRED ....PLEASE HELP !!!!
zassamel said:
I have the same problme! I can flash Combination file and then its booting and I can go to recovery mode ,but after when I flash again STOCK rom succesfully ,S8 wont boot Any Idea what is going on ? Im on U2CRED ....PLEASE HELP !!!!
Click to expand...
Click to collapse
I can flash Combination file
Click to expand...
Click to collapse
What this supposed to me ?
samsung s8
StonebridgeGr said:
What this supposed to me ?
Click to expand...
Click to collapse
Combination File ,its AP witch allow you to bypass for example FRP lock
osidaksjdmw said:
I successfully rooted my phone but it got stuck in a bootloop when I restarted it.
I can't enter recovery mode or turn it off, all I can do is enter odin mode.
I have tried:
1. The AGQ5 fix (https://forum.xda-developers.com/ga...g-aqg5-fix-t3636857/post73032395#post73032395) it doesn't work.
2. Smart switch, it says my device is unsupported
Please help!
Click to expand...
Click to collapse
EXACT same problem. Put I cant flas anything via Odin. Not even TWRP. What do I do???
PLEASE help
benna said:
EXACT same problem. Put I cant flas anything via Odin. Not even TWRP. What do I do???
PLEASE help
Click to expand...
Click to collapse
why you cant? what error did it give you? might you dont have drivers installed on your pc?
StonebridgeGr said:
why you cant? what error did it give you? might you dont have drivers installed on your pc?
Click to expand...
Click to collapse
ODIN MODE
DOWNLOAD SPEED : FAST
NAME: SM-G950F
CURRENT BINARY: CUSTOM
SYSTEM STSTUS : CUSTOM
RMM STATE: PRENORMAL
FAP LOCK: OFF
OEM LOCK : OFF
SECURE DOWNLOAD: ENABLED
SW REV. CHECKFAIL(BOOTLOADER) DEVICE :2 BINARY :1
I can ONLY boot into download mode.
When switching on the phone , I get the Galaxy S8 logo by Samsung with the red writing on the top:
"Only officiall released binaries are allowed to be flashed"
Flashing original firmware via ODIN just fails.
"Complete (write) operation failed !!" is the error in Odin.
I tried different versions of Odin , original firmware and boot loaders suggested on XDA. All just fails.
So my phone is just dead.
I had the lasted firmware on ( OTA update about a week ago)
I installed TWRP now , roooted with Magisk , all was fine untill I rebooted the phone.
So drivers and all are fine , everything worked until I rebooted the phone.
Please help. What to do now. I need my phone !!!
PLEASE