Hi
I need a help. I was flashed by odin new KitKat rom from samsung website after passed phone restart and stuck on Recovery booting. I cant get any download mode or recovey still this same - only samsung Galaxy note 3 logo and blue info on top"Recovery Booting..." Please help me.
Think I have the same issue.
Followed the guide as quoted in this post; http://forum.xda-developers.com/showpost.php?p=49438067&postcount=402
Downloaded from post; http://forum.xda-developers.com/showpost.php?p=49448237&postcount=443
Can't boot into download mode and it doesn't connect to PC. Just stuck saying "Recovery Booting..."
Edit: I can boot into download mode. Trying the same guide again.
Edit 2: Second flash worked.
sylwek23111 said:
Hi
I need a help. I was flashed by odin new KitKat rom from samsung website after passed phone restart and stuck on Recovery booting. I cant get any download mode or recovey still this same - only samsung Galaxy note 3 logo and blue info on top"Recovery Booting..." Please help me.
Click to expand...
Click to collapse
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Thank you both for help. I fixed. Now i have kitkat with root but is another problem about cwm recovery. I was flashed by odin 6.0.4.5 and was successful but not working on my phone i cant get in. Always when i pressing tree buttons is "RECOVERY BOOTING" and restarting phone and booting system normal. Any advice?
sylwek23111 said:
Thank you both for help. I fixed. Now i have kitkat with root but is another problem about cwm recovery. I was flashed by odin 6.0.4.5 and was successful but not working on my phone i cant get in. Always when i pressing tree buttons is "RECOVERY BOOTING" and restarting phone and booting system normal. Any advice?
Click to expand...
Click to collapse
I found problem. i was flashing cwm 6.0.4.5 but i should 6.0.4.6 now everything fine.:laugh:
sylwek23111 said:
I found problem. i was flashing cwm 6.0.4.5 but i should 6.0.4.6 now everything fine.:laugh:
Click to expand...
Click to collapse
Good news. :good:
orange_dutchman said:
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Click to expand...
Click to collapse
thanks for your help, i thought that i will send my note 3 to claim warranty at tomorrow. My phone just stuck at the "recovery booting" after failed in flashing the rom with mobile odin pro.
Nightmare79 said:
Think I have the same issue.
Followed the guide as quoted in this post; http://forum.xda-developers.com/showpost.php?p=49438067&postcount=402
Downloaded from post; http://forum.xda-developers.com/showpost.php?p=49448237&postcount=443
Can't boot into download mode and it doesn't connect to PC. Just stuck saying "Recovery Booting..."
Edit: I can boot into download mode. Trying the same guide again.
Edit 2: Second flash worked.
Click to expand...
Click to collapse
im note able to boot into download mode any help
---------- Post added at 12:50 AM ---------- Previous post was at 12:28 AM ----------
orange_dutchman said:
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Click to expand...
Click to collapse
thanks you saved me
HELP!!!!
I JUST TRIED TO JAILBREAK MY PHONE USING CF-Auto-Root-hltetmo-hltetmo-smn900t.zip AND NOW MY PHONE IS STUCK IN RECOVERY MODE. I TOOK THE BATTERY OUT AND TRIED TO BOOT IT UP NORMALLY AND IT WON'T ALLOW ME TO. :crying: WHAT DO I DO????
jmanciaz said:
I JUST TRIED TO JAILBREAK MY PHONE USING CF-Auto-Root-hltetmo-hltetmo-smn900t.zip AND NOW MY PHONE IS STUCK IN RECOVERY MODE. I TOOK THE BATTERY OUT AND TRIED TO BOOT IT UP NORMALLY AND IT WON'T ALLOW ME TO. :crying: WHAT DO I DO????
Click to expand...
Click to collapse
Reflash stock firmware with Odin and after that data reset, then find a custom recovery like this one http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltetmo and flash it with Odin and flash the latest superSU.zip in recovery and you`re rooted.
Guys, I have a problem
I was stuck on recovery rebooting and now i'm on download mode and have problem with uploading stock rom
Odin 1.85 Says "Write operation failed"
On the screen i have "WTITE PROTECTION: ENABLE
And - after "Start" of flashing
"UDC START
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2"
please help!
konradciok said:
Guys, I have a problem
I was stuck on recovery rebooting and now i'm on download mode and have problem with uploading stock rom
Odin 1.85 Says "Write operation failed"
On the screen i have "WTITE PROTECTION: ENABLE
And - after "Start" of flashing
"UDC START
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2"
please help!
Click to expand...
Click to collapse
What were you trying to do before you get this error?
hey_joe said:
What were you trying to do before you get this error?
Click to expand...
Click to collapse
I was trying to flash custom rom (alexandr) with mobile odin. But first i made CF Auto-Root
Now I have nothing but stock recovery N9005_Stock_Recovery_KK.tar.md5
Phone is rebooting on logo Samsung Galaxy Note 3.
I have access to downlowad mode and to this recovery. And now i don't now what to do...
konradciok said:
Guys, I have a problem
I was stuck on recovery rebooting and now i'm on download mode and have problem with uploading stock rom
Odin 1.85 Says "Write operation failed"
On the screen i have "WTITE PROTECTION: ENABLE
And - after "Start" of flashing
"UDC START
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2"
please help!
Click to expand...
Click to collapse
Write the stock 4.4 ROM for your phone in normal Odin.
konradciok said:
I was trying to flash custom rom (alexandr) with mobile odin. But first i made CF Auto-Root
Now I have nothing but stock recovery N9005_Stock_Recovery_KK.tar.md5
Phone is rebooting on logo Samsung Galaxy Note 3.
I have access to downlowad mode and to this recovery. And now i don't now what to do...
Click to expand...
Click to collapse
I suggest you do the following;
First boot into stock recovery and do a factory reset, reboot and see if it boots up to android.
If that doesn't work, you can either odin a custom recovery like TWRP or CWM. Make sure you flash the latest one for KK as I've seen lots of people flashing one for 4.3 when they have a 4.4 bootloader.
Lastly, you can odin the stock firmware for your phone which can be downloaded off sammobile.
orange_dutchman said:
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Click to expand...
Click to collapse
Thank you for saving my life, I love you man :laugh:
Thanks!!! Although this tutorial is for a note3 I follow all your recommendations, applied to my note4, and now my phone is working again.
Need help
Hello need help here,
I'm being dumb and fail to root my phone
I try to root my galaxy note 3 by following the step on http://forum.xda-developers.com/galaxy-note-3#root
I downloaded CF-Auto-Root-hlte-hltexx-smn9005 and kies3
However after using odin with check on PDA which is linked to the file in the zip called CF-Auto-Root-hlte-hltexx-smn9005.tar.md5
and check on auto reboot
in odin, it says that my root has pass within 13s
BUT
my device keep looping afterward and
show
Recovery Rebooting....
Recovery is not SEANDROID ENFORCING
Set Warranty Bit : Recovery
and then turned off
and then show that again
and turn off and show that again and soo on
I tried : removing battery and put it back in, it autoboot even without me pressing the power button and it goes showing above message again.
i tried to press the volume down+home+power button, nothing changed
I desperately need help here
any help is appreciated.
orange_dutchman said:
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Click to expand...
Click to collapse
i tried this process which you told but also my samsung galaxy mega lte I9205 stucks on recovery booting. is there any other idea to fix it.
i have samsung galaxy mega lte I9205. i updated it to the new version of kitkat by odin. it became passed but after flashing the rom whenever i open my phone it says recovery booting on the left at the top and frequently gets switch off and opens again and again. i ticked on bootoader update on odin also but it dint fixed the problem. is there any idea to fix it.
I was L17(5.0) Dr Ketan's ROM. I had done all the flashing on TWRP.
Today when i tried to go to recovery, it landed on stock recovery and not TWRP.
And when rebooted the phone it constantly gave me error messages one by one that "Unfortunately, ... service has stopped"
My first question is TWRP won't work on android 5.0?
I tried flashing TWRP through odin but it failed and gave this error: Complete(Write) operation failed
Did i do something wrong?
All help will be appreciated.
Thanks
Edit: Now when i try to go to recovery/reboot it says firmware upgrade encountered an issue. Go to recovery in Kies
All i did was unsuccessfully tried to flash twrp/cwm.
I got the same error, when I was trying to flash TWRP2.8.3.0 via odin. I corrected issue by by trying to go back to download mode and flashing another recovery.. as I remember.
Please check whether you can go to download mode??
arunastan said:
I got the same error, when I was trying to flash TWRP2.8.3.0 via odin. I corrected issue by by trying to go back to download mode and flashing another recovery.. as I remember.
Please check whether you can go to download mode??
Click to expand...
Click to collapse
I can go to download mode but I'm unable to flash CWM also.. can you give the recovery which you flashed?
Today i was trying to install the Android Marshmallow 6.0.1 on my Galaxy S5 Snapdragon via Odin, i downloaded the firmware from Sammobile, i verified that the phone model was exactly the same as named on the firmware, i place the .md5 file in the AP slot and everything was ready to go! (The phone was already plugged and in Bootloader mode, and drivers were up to date) then when finishing the flash Odin FAILS to complete the flash and the phone is left with nothing than the Download mode, i panic and try to access recovery mode but realize that there´s no recovery....I proceed to install the recovery.tar into my phone and it works, i start the phone and Samsung logo comes up, finally it loads and does al the process after you flash a Samsung phone.
Everything works just fine!...except for one thing, THERE´S NO RECOVERY!!!. The phone works perfectly but when i try to enter recovery mode, it sends me to Odin mode as it displays a message saying that failed to boot into recovery.
Please help me i don´t know what to do.
Thanks!
Just flash a custom recovery like twrp or cwm
Already did...same problem, recovery won't boot
adavicco said:
Already did...same problem, recovery won't boot
Click to expand...
Click to collapse
You need to flash a pit file to complete the install correctly.
Hi,
I recently got me a Galaxy S5 (SM-G900F) and the first thing i wanted to do was installing CM13 as I always do with my new phones. However, when i followed te steps on CM wiki using Heimdall to flash TWRP the blue bar of the downlaod mode increases a small bit, then stops and in the command promt it says something about error with finding PIT. After trying this for three times i decided to go with Odin, which I do prefer anyways.
I tried flashing TWRP , the blue bar is filling to 100% but then on the little screen where Odin usually states FAIL! or PASS! it just says RESET! and my phone is restarting. Shortly after it restarded you can see the RESET! turning to PASS!, but when I tried checking in TWRP is installed, it wasn't. I tried it again and then Odin suddenly says FAIL! After restarting my phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I couldnt even enter download mode anymore till I tried if getting out the battery would work. I could enter download mode again and flashed the same TWRP on my phone again, and aigain it says RESET! but after that my phone worked again. I tried flashing with another version of Odin and TWRP but same thing happened - First run it said RESET!, second run FAIL!.
I thought maybe rooting the device and installing TWRP via their app afterwards could do the trick. So i tried flashing Autoroot with Odin but it made my phone showing a screen with Samsung logo and in the upper left corner something about recovery mode, seemed to be a loop/freeze. So i took out the battery again and flashed TWRP and that solved the problem again. At last I tried rooting by using TowelRoot but it says the service is not available for my device, even though S5 is listed as a supported device.
I really have no idea what to do anymore, would be very grateful if someone could come up with a solution.
BTW: Is it possible to flash CM13 without using custom recovery by using stock recovery?
Greetings
Khalitas
Khalitas said:
Hi,
I recently got me a Galaxy S5 (SM-G900F) and the first thing i wanted to do was installing CM13 as I always do with my new phones. However, when i followed te steps on CM wiki using Heimdall to flash TWRP the blue bar of the downlaod mode increases a small bit, then stops and in the command promt it says something about error with finding PIT. After trying this for three times i decided to go with Odin, which I do prefer anyways.
I tried flashing TWRP , the blue bar is filling to 100% but then on the little screen where Odin usually states FAIL! or PASS! it just says RESET! and my phone is restarting. Shortly after it restarded you can see the RESET! turning to PASS!, but when I tried checking in TWRP is installed, it wasn't. I tried it again and then Odin suddenly says FAIL! After restarting my phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I couldnt even enter download mode anymore till I tried if getting out the battery would work. I could enter download mode again and flashed the same TWRP on my phone again, and aigain it says RESET! but after that my phone worked again. I tried flashing with another version of Odin and TWRP but same thing happened - First run it said RESET!, second run FAIL!.
I thought maybe rooting the device and installing TWRP via their app afterwards could do the trick. So i tried flashing Autoroot with Odin but it made my phone showing a screen with Samsung logo and in the upper left corner something about recovery mode, seemed to be a loop/freeze. So i took out the battery again and flashed TWRP and that solved the problem again. At last I tried rooting by using TowelRoot but it says the service is not available for my device, even though S5 is listed as a supported device.
I really have no idea what to do anymore, would be very grateful if someone could come up with a solution.
BTW: Is it possible to flash CM13 without using custom recovery by using stock recovery?
Greetings
Khalitas
Click to expand...
Click to collapse
RESET! is basically the same thing as PASS! What version of TWRP are you installing? The keis screen you got is the same as download mode. Why are you using heimdal? your idea to go with Odin was a good one. Anyways, download TWRP 3.0.2 (not 3.0.2-1 or 3.0.2-2 as they are buggy) and flash it in Odin, reboot to recovery and install the ROM you like, of course following its specific install instructions. No, you cant install a custom rom with stock recovery
Thanks for your answer, meanwhile i managed to fix this problem. Had to flash the latest Firmware because twrp (could just install the oldest version otherwise I had no option to boot into recovery at all) said no OS installed. After rooting via Odin worked like it's supposed to.
Why did I use Heimdall? Because I wanted to stick to CM-wikis instruction and they used Heimdall.
Hello, i hope someone can help me. My goal was to install lineageos on the A20e. So i unlocked the bootloader succesfully. Then i wanted to install TWRP. I used heimdall for flashing (with: heimdall flash --recovery twrp.img). The process ended without any errors. But since this point the phone stuck in download mode. When i restart the phone (volume down + power) the phone runs rapidly into the download mode. On the top left corner it show an error message (look at the screenshots). I tryed to flash twrp again for two or three times and one times the orange recovery - the results are the same.
I can still reach the phone via heimdall or odin. i have downloades the latest stock rom. So i hope to unbrick the phone - but until now i have no idea how to do. Please tell me, if you know some hints. You can also post if you think its hopeless and there ist no way to unbrick the phone.
Update: I have flashed the stock rom via odin succesfully. now it starts normaly. Do i want to do a next try ;-) ...
Thread can be closed...
Thank U
Jan
Flash a blank vbmeta after flashing recovery.img, Using Heimdall