Database Users

[Solved] Phone is stuck

Hi.
Phone is not bricked, but stuck at a moment of the boot process. Whatever I do, it gets stuck in a loop. It seems that it's a kernel issue. I've tried everything I know to fix this (kdz updater & more than 5 firmwares), unsuccessfully... It happened while flashing with a stock 2.1 firmware from a CM7 M4 ROM.
screenshot:
I think I simply ****ed the phone so it is impossible to solve that now.
Any suggest is welcome.

Fix
IT'S A KERNEL ERROR
READ ALL FIRST!!!
Have the necessary software.
- Phone Drivers
- KDZ_updater
- The Room you want to install (.kdz)
When we light up the phone and leave us this error screen:
1. Pull battery, sim, sdcard out
2. press the power key + the Volume Down key to set the phone into download mode or (Download Mode), and only then plug USB cable... (if its not recognized unplug and plug again)
3. Disable USB LG Driver Model, this will change depending on the operating system we have in the case of windows will be in Manage> Device Manager> Modems> LG USB Drive Model -> Right Click "Disable "
4. Open KDZ_FW select type 3GQCT, Phone Mode: DIAG (if not try with CS_emergency), consider the room to install (File *. kdz).
Veronica

Hey Veronica.
thanks for you attention, but I already tried every possible things at playing with kdz updater. When KDZU send the IParam 215, the phone reboots, and the error keeps happening, whatever the mode used or the firmware version.
just for saying, there is no need to hold the power buton when the battery is out. Just hold V- before pluging the usb cable.
is there a way to "format" all the datas of the phone ?

first off you do no that the only way you could have went back to 2.1 is with clockwork.
have you tried to see if fastboot works if it does flash a custom rom onto it.
Sent from my GT540 using XDA Premium App

Hey eoghan2t7
I have new events. I've just successfully flashed it with the 2.1 open + fb firmware. Now, it is stuck on the android logo (seems to load but keeps looping).
Fb seems to work (performed a reboot with cmd), What should I do now ?

ok go in to fb and run
fastboot -w then try and boot the phone normally.
Sent from my GT540 using XDA Premium App

thank you very much eoghan2t7
Phone started normally. I didn't know that to downgrade the firm it needs to do it by recovery. However, I rightly tried to flash preciesely by recovery (so wihout knowing), then I got an error and it said something like "update aborted, reboting". The kernel error appeared after that, but before I even try a normal boot. Then I directly flashed using KDZU.
So, it is solved. Thanks again.

glad you got it sorted.
Sent from my GT540 using XDA Premium App

always do a full wipe data/factory reset BEFORE and AFTER flash any rom!
Veronica

okay Ill' remember it

[Q] (Solved) Unrooted my Defy using sbf in Linux and I see only the logo

Hello,
I installed 2nd init, CM7 and it was working great, then I ugpraded to CM9 nightly and it was also working great. My earpiece broke and I am about to send the phone to service, I need to flash it with stock. So I have downloaded JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf and sbf_flash, booted into bootloader (UP KEY), flashed in my Fedora Linux. Everything worked great.
After process completed, Defy rebooted and now I only see ANDROID logo, nothing happens, its booting forever ;-) Did I something wrong? Should I remove the 2nd init bootloader first or something? Should I clear cache before doing this? Is there a way out for me?
I am currently downloading other stock roms, but this one (U3 3.4.2) was the one I was shipped with it. I know there is some limitation (no possibility of downgrading) so I went to Settings - About phone and downloaded the very same SBF file that I was shipped with, but apparently it was useless :-(
Is it possible the first boot after SBF takes long (some formatting or something)? I am waiting 10 minutes now with no luck...
SOLVED:
Pull battery,
put battery back in holding the VOL-Down until the android pops up...
press VOL-Up and VOL-Down at the same time (!!!)
Wipe Data/Cache + Factory RESET (!!!)
Reboot, flash SBF. Works

wipe data in stock recovery...
Sent from my MB526 using xda premium

[Solved] bricked defy Step by Step Walkthrough

Original message
:I need some serious help.
I tryed to flash custom 2.3.6 fixed sbf.
which didnt end well, after powerup i would go straight to bootloader with err codes.
so tryed to flash another stock SBF, that ended me in inifinte bootloop with android logo. after 20 minutes in bootloop i gave up and flashed another stock SBF this time it was cellcom israel sbf, it finished the flashing succesfully but now the phone wont powerup at all. not bootloader not recovey.
nada...
I really need your help here, any kind of insights will help. please this is urgent.
BTW: this is a red lense defy, last rom was JB 4.1.1 quarx 30.07 build.
the sbf was supposed to have the same rom.
update 1: managed to finally flash stock, cant enable 3g. phone is still rooted, installing superuser is succesfuly but doesnt control attributes. so 2ndinit currently does not work,
issue solved
Click to expand...
Click to collapse
UPDATE 16/11/2012: links check and updated everything should work.
Solution:
1. first get these files as we'll need all of them: Rsd lite (download and install that),
Motorola drivers (download and install: Here)
JORDN_U3_97.21.51.rar(contains sbf file): http://www.4shared.com/get/xzT3dMXv/JORDN_U3_972151.html
firmware.rar(contains another sbf file): http://www.4shared.com/rar/Ytt5O6--/firmware.html
2ndinit 1.4.2, and 2ndinit 2.3 (can be found here: http://forum.xda-developers.com/showthread.php?t=1032212).
also need the nandroid backup: http://www.4shared.com/file/pVQfB4bF/2011-06-11141427.html
[Optional]
superuser.zip file installing from recovery: http://downloads.androidsu.com/superuser/Superuser-3.2-arm-signed.zip
2. [Optional] I didn't have a router at my house and no signal at my phone and i needed internet for 2ndinit, so i installed a program that turns my wifi on the computer into a hotspot, it can be found here: http://www.connectify.me/
3.First shutdown your phone, hold the Vol down and boot the phone up keeping the volume down pressed. you should come up to a triangle android logo, press the vol up and down key and then tap the screen ( this is a touch screen gui), choose the wipe data/cache and press ok, this should take up to 5 minutes.
4. Now, shut down the phone (pull the battery out and return it back in), Hold the Vol Up button and power up your phone.
you will enter the Bootloader (or BL as its called in the forums) and you should see the phone stating that (usually 9.10 version)
5. after installing Rsd lite, launch it, extract the JORDN_U3_97.21.51.rar and firmware.rar files into root directory (C:\ or D:\ or whatever).
in rsdlite press the
...
Click to expand...
Click to collapse
button and choose the JORDN_U3_97.21.51.sbf file.
connect your phone via a usb cable to your computer, the phone should state its connected. and you should see on the rsdlite window that a device is connected, click on it and press the button :"start".
let it finish and boot on itself (it should do that).
6. [Optional] if you started with low battery now is a good time to charge your phone.
7. transfer the 2ndinit 1.4.2 apk and the 2ndinit 2.3 apk into a folder in your sd card (name it "A" for ease of use).
also extract the 2011-06-11.14.14.27.zip into this folder on your sd card "/clockworkmod/backup/"
8. extract the superoneclick on your computer and launch it, while the phone is connected (should also be in usb debugging mode), press the root button in the superoneclick window and watch the magic, make sure you also install busybox (should be installed automatically when pressing the ROOT button).
9. disconnect your phone, use the file explorer provided with this rom and make sure you check with a "V" to "allow 3rd party apps" in the settings. install the 2ndinit1.4.2.apk file.
open the app after installation and make sure you have internet connectivity, press the install bootmenu option.(now pop-ups should appear regarding permissions, choose "allow" for all of them).
after the green led has turned on, go to settings menu under application/development and turn off the "usb debugging mode".
10. restart your phone and make sure you press the vol down button when the led turns blue during the bootup.
when in bootmenu, choose recovery-> custom recovery.
when in recovery, choose "wipe data/factory reset", "wipe cache", "advanced-> wipe dalvik".
now return to recovery menu and choose "backup/restore"->"restore->2011-06-11.14.14.27".
this should take a couple of minutes.
when its done, go back again to recovery menu, and choose again "wipe cache", "advanced-> wipe dalvik".
power off the phone.
11. hold the vol up button once again and power up the phone to go into bootloader screen.
connect your phone once again to your computer and on the rsdlite window choose the "firmware.sbf" file.
press start and flash it.
12. let the phone boot up, congrats you just revived your phone, root it once again using super one click (if needed), install the 2ndinit2.3.apk.
transfer whatever rom you like (dont try sbf's cause that's how I first got in this mess), reboot phone, go into stock recovery and install that zip after wiping data/factory reset. and ohh well you know the rest.
Good luck.
P.S if you can't or dont know where to find the files take a quick search in the forums and youll find most of them.

Reserved

reserved

when i flash firmware.sbs it takes me back to Android Bootmenu when it reboots please help. thanks

Shouldnt happen, make sure you Wipe Data, and cache, before the nandroid backup and after the nandroid backup.
only then u can flash the firmware.sbf
if the bootmenu still comes up simply choose "Boot-> set default-> normal". and reboot.
if still comes back to bootmenu (and i hope you are talking about bootmenu and not bootloader). install through custom recovery your favorite ROM and don't forget the corresponding Kernel.
good luck!

Is that work with bl7 ???

I've been trying to restore my phone for weeks, up until this thread, I started to think the internet couldn't help me. You are a god amongst men.

OK, banging my head against a wall here; I have 2 defy's. Mine has been to a war zone 4 times, I've replaced the screen (and the waterproof gasket) once, It's broken (the case) but still works except for the fact that the last time I had to flash an sbf I messed up the charging ability with the "macguyver" method.
Now I recently got a pristine looking red lens defy from a friend who said it wasn't booting...It "tried" but never stayed booted long. I tried immediately flashing one of the fixed sbf's with CM10 on it, and ever since I get the bootloader 09.10 code corrupt message.
I've tried the method listed here (by the way the first firmware in OP won't download for me, something about violating some terms of agreement?) the one labeled simply "firmware" downloaded.
Still no joy. Every flash I get all the way through code group 32 checksums match. Everything after that fails. Have tried multiple CEE, Nordic, Chinese, even Defy+ sbf (the new defy has red lens) with no luck.
Likewise when I tried flashing via linux (sbf_flash). The other night after battery out for quite awhile it led me to believe it had started working, and allowed me to get into recovery and wipe everything, but it was all false hope. It still did not boot (motorola M boot loop) and likewise, it still did not flash.
Anyone have any ideas how I can proceed to fix this thing?
I thought I had this thing figured out but obviously I was mistaken.
thanks in advance

I just unbricked my phone again yesterday after trying the latest cm10 sbf with no luck, so i can guarantee this method still works, however the firmware.sbf file is really needed and also the nandroid backup, so here's what i'll do:
1. i'll check what links are broken and reupload the necassery files.
2. I'll clean the the first message and update the links
so check back in about an hour

Thanks a lot for posting this. Tried to restore my phone using lot of other posts since the last 3 to 4 days days, but all in vain.
Was anybody able to install CM10 over this? After the installation, the phone is going into boot loop.

Thanks rtk217 for starting this guide very useful for noobs...
I've made some video tutorials using a few of the guides in the forums here...
hope it helps someone...
Its a complete step by step.
Part 1 of 4. This part deals with preparation of all the required files to successfully complete the custom rom installation.
http://youtu.be/jMAlys2_KG4
Part 2 of 4. How to restore Defy to default
http://youtu.be/6SUysKZ2E5Y
Part 3 of 4. How to root using SuperOneClick and install clockworkmod.
http://youtu.be/hd3_SRbkUWw
Part 4 of 4. How to install 2ndinit recovery and install CyanogenMod 10 Jelly Bean 4.1.2
http://youtu.be/gNPacGesWOI

I am still not able to install CM10. I had bricked my phone a week ago, so I followed this post using the below steps:
1. Flashed with JORDN_U3_97.21.51.sbf.
2. Installed 1.4.2 Sndinit..
3. restored the nandroid backup 2011-06-11.14.14.27
I am able to restore Froyo...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?

k.manojraja said:
I am still not able to install CM10. I had bricked my phone a week ago, so I followed this post using the below steps:
1. Flashed with JORDN_U3_97.21.51.sbf.
2. Installed 1.4.2 Sndinit..
3. restored the nandroid backup 2011-06-11.14.14.27
I am able to restore Froyo...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
Click to expand...
Click to collapse
Have you got a Defy or Defy+ as you are trying to install the cm10 zip for MB526 (Defy+)

I have a defy mb525.. The one i tried to install is a 2nd boot build that is common for both mb525 and mb526

k.manojraja said:
...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
Click to expand...
Click to collapse
Why are you using 2ndInit 2.3???
All the guides and FAQs will tell you to use 2ndInit 1.4.2

hey i have the same problem did you fix it?
k.manojraja said:
I have a defy mb525.. The one i tried to install is a 2nd boot build that is common for both mb525 and mb526
Click to expand...
Click to collapse
hey i have the same problem did you fix it?

Thanks ...
Hay, Ur are a genie to me.. I tried so many mods after my imei no is gone. Wifi not working, issues with signal catching.. Now with your step by step guide i was able to overcome all of those... Thank you very much.

cmcooper123 said:
hey i have the same problem did you fix it?
Click to expand...
Click to collapse
Yep... Please see the thread http://forum.xda-developers.com/showthread.php?t=1618718&page=32
Look at pages 31 and 32...

k.manojraja said:
Yep... Please see the thread http://forum.xda-developers.com/showthread.php?t=1618718&page=32
Look at pages 31 and 32...
Click to expand...
Click to collapse
but if i flash defy plus firmware on a defy mb525 wont that brick it?
---------- Post added at 12:05 PM ---------- Previous post was at 11:24 AM ----------
cmcooper123 said:
but if i flash defy plus firmware on a defy mb525 wont that brick it?
Click to expand...
Click to collapse
lol my bad it did brick it kind of
flashed DEFYPLUS_U3_4.5.1-134_DFP-137_ND_SIGN_SIGNED_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P009_A011_HWp3_Service1FF
then JORDN_U3_97.21.51.sbf
now it has a black screen but in boot loader mode sigh
any way this is were i am at:
http://forum.xda-developers.com/showthread.php?t=2032711
SIGH

cmcooper123 said:
bwithut if i flash defy plus firmware on a defy mb525 wont that brick it?
---------- Post added at 12:05 PM ---------- Previous post was at 11:24 AM ----------
lol my bad it did brick it kind of
flashed DEFYPLUS_U3_4.5.1-134_DFP-137_ND_SIGN_SIGNED_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P009_A011_HWp3_Service1FF
then JORDN_U3_97.21.51.sbf
now it has a black screen but in boot loader mode sigh
any way this is were i am at:
http://forum.xda-developers.com/showthread.php?t=2032711
SIGH
Click to expand...
Click to collapse
I am really not sure if you have read the posts properly. I had no problems in flashing the defy plus sbf. The defy plus sbf that I gave you was a bl6 version and you can never downgrade to froyo.
97.21.51 is a Chinese éclair with bl5. 2nd boot builds were not working on bl5.

I can not boot system or go to bootloader. BRICK?

hi!
I wanted as a normaly update my defy from JB QUARX CM10 25.8. to JB QUARX CM10 28.8.. BUT, when it was instaling suddenly Defy restarted. After it was only showing the logo GOOGLE bud i can not go to boodloader or recovery. I tryied to flash sbf file with RSD but when I connected my defy to PC only white led blinked and nothing happened. PC is not see defy.
What do I do?
pls help me....
thx
Sorry for my english...

sterver1 said:
hi!
I wanted as a normaly update my defy from JB QUARX CM10 25.8. to JB QUARX CM10 28.8.. BUT, when it was instaling suddenly Defy restarted. After it was only showing the logo GOOGLE bud i can not go to boodloader or recovery. I tryied to flash sbf file with RSD but when I connected my defy to PC only white led blinked and nothing happened. PC is not see defy.
What do I do?
pls help me....
thx
Sorry for my english...
Click to expand...
Click to collapse
see this http://forum.xda-developers.com/showthread.php?t=1150155 try to charge your battery fully. hope it works..

you tried in another PC o USB cable ?

I can not go to recovery. But I managed to go to flash menu (or what is this (power + volumeup and place battery))- i tryed to flash this:"Froyo_CEE_2.2.2\JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_P DS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.s bf" with RSD Lite but: "Failed lashing process. Failed lashing process. Phone[0000]: Error getting subscriber unit informatieon. Device API Error: 0xE 0030007 Command RQHW (0xE0831007); phone disconnected"
After it I tryed agine go to to power + volumeup and place battery but it write Baterry low. Now propably I charing batery (I have connected my defy to AC and GOOGLE is showing, battery heating). Then I try to flash it agine. - that isn't working
Propabbly I must use maccgyver hack but I haven't got any bad or superfluous USB cabel.

sterver1 said:
I can not go to recovery. But I managed to go to flash menu (or what is this (power + volumeup and place battery))- i tryed to flash this:"Froyo_CEE_2.2.2\JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_P DS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.s bf" with RSD Lite but: "Failed lashing process. Failed lashing process. Phone[0000]: Error getting subscriber unit informatieon. Device API Error: 0xE 0030007 Command RQHW (0xE0831007); phone disconnected"
After it I tryed agine go to to power + volumeup and place battery but it write Baterry low. Now propably I charing batery (I have connected my defy to AC and GOOGLE is showing, battery heating). Then I try to flash it agine. - that isn't working
Propabbly I must use maccgyver hack but I haven't got any bad or superfluous USB cabel.
Click to expand...
Click to collapse
Try to enter stock recovery ab do a factory reset
If your battery is really empty you can use ab old Nokia wallcharger out else ....... just figure out what is plus and what is minus....
Sent from my MB526 using xda app-developers app

Do you have the appropriate drivers installed on your pc for rsd? You have to be able to flash an sbf, a failed Cm update flash won't brick your Defy, it's much harder to brick it...
Sent from my MB525 using xda app-developers app

lexer98: Yes I tried it... It is same.
bone101: I can not enter to any recovery.
sa3e1: Yes, I have all drivers.
I try the other.

Turn off defy, then hold power and vol+ button for 5-10 sec, when you release the buttons, your phone will power up in Stock bootloader. Does it work until this point?
Sent from my MB525 using xda app-developers app

sa3e1 said:
Turn off defy, then hold power and vol+ button for 5-10 sec, when you release the buttons, your phone will power up in Stock bootloader. Does it work until this point?
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
When I do that, on screen show: Battery Low - Cannot program.
But all is OK because I bought universal charger and now I'm charing battery..:cyclops:
Next I flash correct SBF file via RSD Lite. Is it ok?

And the phone isn't charging when it's off?? I hope it will be ok after charging battery with external charger! Then go to stock bootloader and flash a stock sbf, or if you want to go straight to CM10 try Easy Recovery sbf:
http://forum.xda-developers.com/showthread.php?t=1787541
Sent from my MB525 using xda app-developers app

Done
Hurray....
My Defy is working now....
Thanks for your help.
I did it as follows: I chared my battery with universal charger. Then I went to stock bootloader (power+volume up) and conected my phone to PC. After it I flash two SBF files* via RSD Lite. Then I went to recovery and wiped all. Now my phone working well....
* first: Froyo_CEE_2.2.2.zip
second: CM7RC1.5_16_09_11_custom.sbf
(I will upload this files to some File Hosting and I'll post here links)

sterver1 said:
Hurray....
My Defy is working now....
Thanks for your help.
I did it as follows: I chared my battery with universal charger. Then I went to stock bootloader (power+volume up) and conected my phone to PC. After it I flash two SBF files* via RSD Lite. Then I went to recovery and wiped all. Now my phone working well....
* first: Froyo_CEE_2.2.2.zip
second: CM7RC1.5_16_09_11_custom.sbf
(I will upload this files to some File Hosting and I'll post here links)
Click to expand...
Click to collapse
Why 2?
Only 1 is enough
Also AICS that is older version of CM7…
Flash froyo and root it...
Install 2ndInit and using cwm install CM10
If you screw up...I am not responsible!
Sent from my MB525 using xda app-developers app

All is ok.... Now I'm using CM10.

[Q] Black screen and bootloop

Hi,
1. I rooted my phone successfully.
2. I installed droid2recovery.apk
3. Restarted. Installed CM10 and Gaaps (wrong version)
4. Reboot. Everything was normal with some annoyances due to the wrong version of Gaaps.
5. Checked and the phone was already rooted in CM10. Installed droid2recovery.apk again. Reboot.
6. Trapped in bootloop.
7. Reboot and enter in system recover.
8. Tried to install CM10 and correct Gaaps. Not possible due to failed to verify whole-file signature.
9. Discover that official recover mode doesn't install unofficial roms.
10. Searched for official roms of Milestone 2 BR. All links are broken.
11. I flashed downgrade_for_bl_3 with RSD Lite. Everything was ok. PASS.
12. Still bootloop. Enter in recover mode. Black screen. Can't see the android icon with exclamation mark.
Is my phone a paper holder now? Please advise.

I'm really without luck today.
I manage to flash a SBF with Android 2.3.6, exactly like the one I had. But then I couldn't root, not with the same method I rooted mine, not with any other method.
Then I downloaded another SBF and used RSD Lite to flash it, and the phone completely died. RSD reported everything OK, PASS, Finished, perfect.
Now nothing happens. The phone is off, black screen. Completely dead. But if I hit Power + Vol - + Camera, the computer recognize. But nothing on the screen. I'm re-flashing the same SBF again.
Why different thing happen when I proceed the same way as I did in the past?
Why can't I just flash a recover boot that accepts direct installation of Cyanogen Mod 10???

douglasrac said:
I'm really without luck today.
I manage to flash a SBF with Android 2.3.6, exactly like the one I had. But then I couldn't root, not with the same method I rooted mine, not with any other method.
Then I downloaded another SBF and used RSD Lite to flash it, and the phone completely died. RSD reported everything OK, PASS, Finished, perfect.
Now nothing happens. The phone is off, black screen. Completely dead. But if I hit Power + Vol - + Camera, the computer recognize. But nothing on the screen. I'm re-flashing the same SBF again.
Why different thing happen when I proceed the same way as I did in the past?
Why can't I just flash a recover boot that accepts direct installation of Cyanogen Mod 10???
Click to expand...
Click to collapse
You have to flash that same Android 2.3.6 SBF file, you can't use any more that "another sbf". For rooting that 2.3.6 use this http://forum.xda-developers.com/showthread.php?t=1750277
http://forum.xda-developers.com/showthread.php?t=1758271 this can help too
After you get CM10 back running, do not use droid2recovery.apk anymore!

Thank you. That really helped.
After you get CM10 back running, do not use droid2recovery.apk anymore!
Click to expand...
Click to collapse
Why not?

Odp: [Q] Black screen and bootloop
douglasrac said:
Thank you. That really helped.
Why not?
Click to expand...
Click to collapse
Because you already have recovery and you don't need it... doing this you can destroy something (maybe 2-init or 2-boot), and you will need to recover your phone using RSD Lite.
via tapatalk

henediac said:
Because you already have recovery and you don't need it... doing this you can destroy something (maybe 2-init or 2-boot), and you will need to recover your phone using RSD Lite.
via tapatalk
Click to expand...
Click to collapse
Hi Douglas, did you get the milestone working again? I'm stucked with the same problem, the rsdlite recognize my cellphone I can flash it but the screen is black. Anything works
How do you fix it?

You can still flash other sbfs, but when do turn on, you need to go in recovery mode, than clear cache and data. It will start normally again.
To go to stock recovery hold when turn on "@" or "x", than when show the "android with ! " you hold volume - and foto or volume + and foto or the volume + and -, than you are in recovery.
Sorry about my English
I am showing all the option because I do not remember perfect what to do... But it works
Sent from my A953 using xda app-developers app

cant get it to work..anyone got a link to a froyo stock sbf?

@Yostarone
http://sbf.droid-developers.org/umts_milestone2/list.php
i don't know what froyo rom you want, so I put link to whole list. (build number for eu froyo is MILS2_U6_2.4.24).

paulimbr said:
Hi Douglas, did you get the milestone working again? I'm stucked with the same problem, the rsdlite recognize my cellphone I can flash it but the screen is black. Anything works
How do you fix it?
Click to expand...
Click to collapse
I didn't get it working. Did you?

douglasrac said:
I didn't get it working. Did you?
Click to expand...
Click to collapse
boot into stock recovery and do a full wipe. This will solve your problem.
Press Power and x (on your Hardwarekeyboard) for several seconds. Release the buttons and you will see a yellow triangle with an exclamationmark in it. Now press vol up and down key together. voilla you got it

lulli1 said:
boot into stock recovery and do a full wipe. This will solve your problem.
Press Power and x (on your Hardwarekeyboard) for several seconds. Release the buttons and you will see a yellow triangle with an exclamationmark in it. Now press vol up and down key together. voilla you got it
Click to expand...
Click to collapse
I wish it was that simple. After flashing the phone is completely dead. And now I cant even go to bootloader anymore.... :crying:

could your problem be battery related? do you have a chance to try using another battery?

lulli1 said:
could your problem be battery related? do you have a chance to try using another battery?
Click to expand...
Click to collapse
Hi,
Sorry for the late reply. I was charging the battery
No, the problem is not the battery. Nothing works anymore. The phone doesn't even turn ON. All Black screen, not even boot loop.
So I get into the bootloader and flash new room. I can see the SN Updated text. But that is it. After it doesn't work.
I flashed DOWNGRADE BL =3 and then I flashed MILA2_U6_3.12.0_SIGNED_US1MILESTONE2PERARB125LA016.0R_GSXMILETPERARLA_P022_A013_M006_HWp2a_WIG142538_Service1FF
Nothing. Black Screen.
Then I flash M2L_U6_4.5.2_51-27_R01_SIGNED_US1MILA2GBPERARB125LA001.0R_STABLE45LAMILETPERLA_P013_A028_M001_HWp2a_Service1FF.
Then I get boot loop.
:S