I downloaded the SlimBean ROM and GAPPS, booted to recovery, and selected the ROM, GAPPS, LOKI DOKI just incase, and flashed it, which took what seems very little time. It then asked to fix permissions so I swiped it and it just shut down immediately and went into the loop. I have tried ODIN, with and without PIT file and it all does the same. Kies was unsuccessful as well. Also, is anyone here who could possibly make a flashable kernel and recovery via ODIN? I am willing to test some things on my phone since it is indeed bricked. Either Monday or Tuesday if I cannot get it up and working I'll be replacing it. It has happened to quite a few others and it seems to do with a AOSP Kernel on a TW ROM? I am not 100% sure and have tried to find an answer but none is found.
Tylor
Edit: SUCCESS!!!! After about working on my phone for 5 hours, it has finally booted!! After Kies did its thing, it started into the boot loop once more. So I just took out the battery and let it sit for maybe 5-10 minutes. I put the battery in and as soon as I did so I held down the 3 buttons to boot into recovery and amazingly it the logo and text appeared. However, at first it did not boot into the recovery, but restarted, but I continued to hold down the keys for recovery and BAM, IT BOOTED!!! So now my Galaxy S4 is finally up and running .
Edit 2 : Sorry about the posting, but it was originally a question that I was hunting for. I hope it helps some people with getting their devices restored.
You said as soon as Kies did its thing. What exactly did you do?
Related
So I recently purchased my AT&T Galaxy S4 with MDL baseband. I rooted and installed TWRP via motochopper. I then loaded Kangabean 4.2.2 and everything was great. Got notification for OTA update to 4.3 and decided might as well load Kangabean 4.3 as opposed to dealing with the OTA notification. I did so (after formatting internal SD and performing factory reset) and now my phone won't boot beyond the Galaxy S4 splash screen. I restored a nandroid backup of the original software and was able to boot the phone once, but couldn't load the custom rom again, nor can i load into the stock rom anymore either. Does it sound like my phone may have a hardware failure? Would attempting to restore through odin be the next logical step? I'm by no means an expert with these sort of things but my S2 has never given me any sort of grief when flashing various roms in the past. Any advice would be greatly appreciated. Thanks in advance!
Try a different kernel, also, pull the battery for 5 min, it will boot.
TheAxman said:
Try a different kernel, also, pull the battery for 5 min, it will boot.
Click to expand...
Click to collapse
Yeah I left the phone off with the battery removed all night - didn't want to boot this morning. I'm also noticing an oddity with TWRP - it's for some reason asking for a password on startup even though I've never set one. It also gives an error when attempting to wipe the phone or re-flash
id try odin
Don't Odin yet. If you can get into recovery see if you can flash a new recovery onto the phone. Try this http://forum.xda-developers.com/showthread.php?p=41746967
jd1639 said:
Don't Odin yet. If you can get into recovery see if you can flash a new recovery onto the phone. Try this http://forum.xda-developers.com/showthread.php?p=41746967
Click to expand...
Click to collapse
It will not let you past the password, been there, it will only do simulated flashes.
Odin is his only option.
So I managed to flash back to stock with odin. I was then able to re-root and re-install recovery. Something is still wrong here though. I was able to load kangabean 4.3, but when i installed the SIM card (kept it out to prevent OTA updates) the phone would no longer boot. I then re-flashed with odin, re-rooted, installed sim, THEN loaded the rom and it worked.... For a while. I had the phone plugged in to my laptop as i had recently transferred some ringtones to the internal SD. I powered down the phone. It seemed to shut the OS down but it then displayed a battery symbol with a rotating circular animation, as if it was trying to show that it was charging the battery. The phone froze in this state.
Another thing that I've noticed is that when this phone freezes, it gets warm. It also tends not to respond well until i've let it cool down. I'm now having difficulty booting the phone after re-flashing with odin. It loads to the white screen with AT&T logo and hangs (and gets warm). I plan to leave the phone alone with battery removed for the day and attempt to reboot or re-flash with odin later.
I find it odd that the rom that i flashed would stop working if i've flashed the rom with the sim removed from the phone, then introduced the sim to the phone after the flash is complete. Is this normal? I'm also unsure if my phone has faulty hardware, or maybe there's some sort of software glitch that's causing it to hang and overhead (like an infinite loop caused by faulty software).
I think if / when I can get it working with the stock rom again, I'll root it and run it for a while and see what it does. I never intended to run this phone with the stock rom as I prefer vanilla android.
I'm wondering if there's something wrong with the kernel. Perhaps I should re-download the ROM and re-install it. I'm not sure but I think the kernel is responsible for charging issues. Perhaps a bad kernel WOULD explain why the phone sometimes freezes at the "battery charging" logo? I'm somewhat at a loss as to what to do. I could try exchanging it through AT&T. If so, I hope they nave another one in their stock that has the MDL baseband as I know I'd be screwed with the current one...
Squidbert said:
So I managed to flash back to stock with odin. I was then able to re-root and re-install recovery. Something is still wrong here though. I was able to load kangabean 4.3, but when i installed the SIM card (kept it out to prevent OTA updates) the phone would no longer boot. I then re-flashed with odin, re-rooted, installed sim, THEN loaded the rom and it worked.... For a while. I had the phone plugged in to my laptop as i had recently transferred some ringtones to the internal SD. I powered down the phone. It seemed to shut the OS down but it then displayed a battery symbol with a rotating circular animation, as if it was trying to show that it was charging the battery. The phone froze in this state.
Another thing that I've noticed is that when this phone freezes, it gets warm. It also tends not to respond well until i've let it cool down. I'm now having difficulty booting the phone after re-flashing with odin. It loads to the white screen with AT&T logo and hangs (and gets warm). I plan to leave the phone alone with battery removed for the day and attempt to reboot or re-flash with odin later.
I find it odd that the rom that i flashed would stop working if i've flashed the rom with the sim removed from the phone, then introduced the sim to the phone after the flash is complete. Is this normal? I'm also unsure if my phone has faulty hardware, or maybe there's some sort of software glitch that's causing it to hang and overhead (like an infinite loop caused by faulty software).
I think if / when I can get it working with the stock rom again, I'll root it and run it for a while and see what it does. I never intended to run this phone with the stock rom as I prefer vanilla android.
I'm wondering if there's something wrong with the kernel. Perhaps I should re-download the ROM and re-install it. I'm not sure but I think the kernel is responsible for charging issues. Perhaps a bad kernel WOULD explain why the phone sometimes freezes at the "battery charging" logo? I'm somewhat at a loss as to what to do. I could try exchanging it through AT&T. If so, I hope they nave another one in their stock that has the MDL baseband as I know I'd be screwed with the current one...
Click to expand...
Click to collapse
TheAxman said:
Try a different kernel, also, pull the battery for 5 min, it will boot.
Click to expand...
Click to collapse
//
Squidbert said:
.
Another thing that I've noticed is that when this phone freezes, it gets warm. It also tends not to respond well until i've let it cool down. I'm now having difficulty booting the phone after re-flashing with odin. It loads to the white screen with AT&T logo and hangs (and gets warm). I plan to leave the phone alone with battery removed for the day and attempt to reboot or re-flash with odin later.
Click to expand...
Click to collapse
If you're on the stock AT&T rom and you're getting stuck on the AT&T boot logo try the following:
Power off your phone and hold down Volume Up, Center Home, and Power buttons together.
Once you see the Galaxy S4 splash - Keep holding down Volume Up and Center Home buttons but let go of Power button.
Choose the wipe datafactory reset. This will wipe your phone completely but it should boot after.
Hope that helps.
Well I've been toying around with this thing and much to my surprise, I have CM10 running stable w/o any issues booting! I think I would prefer to run Kangabean 2.05 (android 4.3) though. Assuming that the kernel could be a likely cause of the OS not booting, could someone recommend a suitable kernel for that rom? It appears to come packaged with the "KT" kernel...
Another thought i had was perhaps TWRP wasn't adding the loki feature to the roms that i was trying. I upgraded from 2.5x to 2.6. Hasn't seemed to have made a noticeable difference though.
Would the fact that CM10 runs absolutely flawlessly with no issues booting at all possibly help narrow down why the other roms that I'm flashing only load up the first time but fail at the "Galaxy S4" splash screen on subsequent reboots? Admittedly I'm a relative noob to roms and such but up until now i've been able to muddle my way through things and eventually figure them out. I'm not having the greatest luck with this one!
Squidbert said:
Well I've been toying around with this thing and much to my surprise, I have CM10 running stable w/o any issues booting! I think I would prefer to run Kangabean 2.05 (android 4.3) though. Assuming that the kernel could be a likely cause of the OS not booting, could someone recommend a suitable kernel for that rom? It appears to come packaged with the "KT" kernel...
Another thought i had was perhaps TWRP wasn't adding the loki feature to the roms that i was trying. I upgraded from 2.5x to 2.6. Hasn't seemed to have made a noticeable difference though.
Would the fact that CM10 runs absolutely flawlessly with no issues booting at all possibly help narrow down why the other roms that I'm flashing only load up the first time but fail at the "Galaxy S4" splash screen on subsequent reboots? Admittedly I'm a relative noob to roms and such but up until now i've been able to muddle my way through things and eventually figure them out. I'm not having the greatest luck with this one!
Click to expand...
Click to collapse
TWRP does not now and has never added LOKI to any ROM or Kernel. Only OUDHS CWM auto-LOKIs. You have to use A pre-LOKIed Kernel or flash the LOKI DokI script to LOKI anything with TWRP. You can do a search to find the LOKI DOKI script and how to use it.
fatah
hi my phone is galaxy s4 at&t i337 rooted but not installed recovery the phone was working good suddenly i deleted at&t software updater after that the phone rebooted it's self and then stuck in at&t boot logo won't bootup please help
TheAxman said:
Try a different kernel, also, pull the battery for 5 min, it will boot.
Click to expand...
Click to collapse
galaxy s4 i337 stuck on at&t bootAnimation
i tried everything but still same please help my phone is not booting up
fatahmusse said:
i tried everything but still same please help my phone is not booting up
Click to expand...
Click to collapse
Flash the stock firmware.
samsung galaxy s4 i337
thank you i flashed to mf3 everything is ok
fatahmusse said:
thank you i flashed to mf3 everything is ok
Click to expand...
Click to collapse
Glad to hear
Hey XDA, just a long time stalker who has finally given up trying to find his solution on already posted items (I think 10 hours of trail and error means I'm not gonna catch what I'm failing to see...)
When I first got my galaxy s4 I downloaded KangaBean and it was on 4.2.2 I believe. Today I decided I should upgrade to 4.4.2 since I've only been hearing good things about it, and I wanted the slight updates that came with it.
Well, I have a AT&T s4, sgh-i337 that was on CWM 6 when I tried updating to another ROM, the first one I tried was GOOGLE EDITION 4.4.2 BY DANVDH. Did a wipe, cache, dalvik, format system, flashed it, flashed loki doki, said no to re-root/root fix prompt that followed, then I came to the yellow triangle, I thought that was odd, believed I missed something.
So, I downloaded TWRP 2.5.0.2 like the thread suggested, tried again, no luck. Then I tried Unoffical Carbon KitKat, which just caused the "Samsung Custom" logo to stay on indefinitely (I let it sit for 40 minutes before giving up.) After 2 failed ROMs, I tried KangaKat, updated version of KangaBean, so it should be just dandy right? Narp, same luck. This one boots, then reboots into recovery.
At this point I considered myself to be stupid in some way so obvious that I would die before I noticed it. So, then I just flashed the stock firmware thats like 2.5 gb through odin, re-rooted and installed CWM 6.0.4.4 LOKI'd and tried to flash KangaKat, being confident it would work this time, again I got boot to the logo and then reboot into recovery.
At this point I attempted the other 2 ROMs again, multiple times.
After some sobbing, I re-did the stock firmware, tried again, failed again.
My sadness turned into rage, I just destroyed one of my micro sd to usb-s because it was being annoying and I was annoyed, I took a picture and got over it.
I tried a 3rd time with the re-flashing stock firmware and tried with twrp again, no cigar.
Now, after MANY hours and MANY false hopes... I shall be using my blackberry and hoping to return to android soon, if somebody can help me figure out what I'm missing. Many thanks ahead!
Did you do lokidoki after?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Did you doa hard reboot clear the cache and davlik after it got stuck on the lock screen ? It seems odd that it would just not boot up at all. I was about to wonder if maybe it was the CM kernel bug that will keep it from booting past the initial screen but you tried aGE rom so...
Guys,
I'm not even sure where to start with what I'm seeing, but maybe you can help me.
I have had Timur's ROM on my N7 2012 for a couple years. It's been crashing randomly, even though I have few things installed on it, and a good power supply. I took it out of my car and put it on an iPad 2 amp supply, and it still crashed a bunch so I knew I needed to wipe and reinstall. I also wanted to go from 4.2.2 to 5+, which I know takes away a lot of the good features I need (like power on/deep sleep).
I booted into TWRP and wiped my tablet, which appeared to softbrick it (I think I have the usage right from searching). I downloaded the Pure Nexus 6.0.1, CM13, and already had Autodroid ROMs to use. I tried to install Pure through ADB sideload, and got it installed. When I finished and tried to reboot, it said I had no OS. When I rebooted, I got the boot animation, and nothing else.
Long story short, I tried Autodroid and CM13, and using CM13 I got it back going. Unfortunately, every time I try to flash another ROM over it, it will no longer go past the boot screen. With CM13, it boots properly, but doesn't like the gapps pico I tried to install (error message when booted, keeps returning to the same pop up error).
I'm quite sure there's something I'm missing, but I don't know what it is.
Thanks!
Eric
Ok, before anyone goes nuclear on me, I think I better understand what happened. When I got ANYTHING to work, I stopped doing anything. As I understand, it wasn't functioning...it was just in a temporary mode of some sort.
After not being able to get it to work properly, I used this: http://forum.xda-developers.com/showthread.php?t=1781250 to try and restore the system. I followed all the directions, except for using the 5.1.1 version of the ROM, and used the corresponding file name for the zip file used.
After doing so, the bootloader won't go to TWRP, but goes to the pic as seen below. I did reboot the tablet, and after waiting quite a while, the tablet came on, but I don't understand what that picture means.
Thanks!
Eric
Ok...I realized that I lost root. I'm fixing it now. I had read before, but didn't understand what I saw.
Thanks,
Eric
Hello Folks,
Looks like I borked my Note 3 tonight. Was attempting to install a new ROM and things didn't go well at all.
Phone was last running BajaROM 4.4.2 with Safestrap as a virtual recovery.
After a failed install of a new ROM from SS, I tried restoring from the backup file I just made tonight before upgrading the OS. Failed. Then, from SS, I wiped the phone and attempted to install the old AllianceROM, and it too, failed. When I went to reboot phone to see what would happen it simply loops the custom Note 3 screen, then blue text Recovery appears in the upper left hand corner, then repeat. Can't boot into recovery, and now, can't get back to Safestrap. All I got is Download mode when I pull the battery and hold Power/Volume Down/Home when I reinsert battery.
I'm following the guide at this link currently, http://forum.xda-developers.com/showthread.php?t=2483380, but have to wait over an hour for the stock Android firmware to download from one of the few hosting servers that still have one of them loaded.
In the meantime, is there anything else anyone recommends? This is my primary device so I'm kinda screwed till I can get it back up again. Any additional info would be appreciated.
Thanks.
For anyone reading who might be in a similar predicament, the soft-brick fix at the link above got me up and running again. Got the Note 3 running on stock OF1/5.0, rooted, and am now looking into unlocking bootloader so I can properly upgrade to 6.0.
A little disappointed no one bothered to respond in what could've turned into a bad situation, but the site itself did bail me out so no big complaints. Thanks to all the devs for their hard work.
i have been trying to install a good rom on my s5. i know that since i have an 11' toshiba chip, i cant do any major custom roms only stock touchwiz roms. i have 3 or 4 that i have found that actually work on my phone and when i tried a new rom today, it didn't work. so i flashed 4.4.2 again to start from scratch and i went back to my usual stock deodexed rom that is always a for sure rom that works. today when i flashed it, twrp (safestrap) prompts me to either boot normally or to continue. i have had this problem in the past, and whenever it shows that screen, it will never boot up, after the prompt it will just have a black screen for about 5 min. before booting stock recovery. if i boot it up again, safestrap will still prompt me if i want to boot recovery or continue and keep repeating this cycle. last time, it had resolved itself and didnt show up after wiping and reflashing my rom. this time it wont go away and my phone wont boot anything. thanks in advance
as.hs said:
i have been trying to install a good rom on my s5. i know that since i have an 11' toshiba chip, i cant do any major custom roms only stock touchwiz roms. i have 3 or 4 that i have found that actually work on my phone and when i tried a new rom today, it didn't work. so i flashed 4.4.2 again to start from scratch and i went back to my usual stock deodexed rom that is always a for sure rom that works. today when i flashed it, twrp (safestrap) prompts me to either boot normally or to continue. i have had this problem in the past, and whenever it shows that screen, it will never boot up, after the prompt it will just have a black screen for about 5 min. before booting stock recovery. if i boot it up again, safestrap will still prompt me if i want to boot recovery or continue and keep repeating this cycle. last time, it had resolved itself and didnt show up after wiping and reflashing my rom. this time it wont go away and my phone wont boot anything. thanks in advance
Click to expand...
Click to collapse
Find youre phones firmware and put phone into download mode and flash firmware!