Related
Hello all,
A bit strange problem. I was trying to adapt MoDaCo custom rom to my Vega from 1,09 FW. Everything was ok until ticking the USB debug mode. Until that time, the device was normal APX mode, but as I switched to USB debug mode, my PC (with Win7 x64) reconized it as "NVidia Tegra 2 USB Device" under disk drivers. So, I cannot go further steps, since windows doesn't recognise device as "android phone"
Anyway, to overcome this I tried to uninstall-reinstall but it didn't work. After every re-install, win7 recognised as same. No change.
Then I tried to change the drivers to right one but this was not possible since when I attempted to do so, the msg I got "You have already the most updated driver"... Then close.
Finally I tried to erase some "tegra2" entries from regedit. Some I could, some not but this was also dead end. Everytime the tabled was recognised as "usb device"
The important thing is I cannot go back to "APX mode" again.
Any advises about this issue?
Many thanks in advance.
The usb switcher is currently not compatible with v1.09. You can try going to software tool in settings and selecting "erase all content and settings"
I am trying to unroot my Nexus S and relock the boot loader. I've followed multiple guides and tried them on different computers (mac & windows). Every time I am supposed to type in "fastboot oem lock" and every time the command prompt just says waiting for device and nothing happens
I've installed the usb drivers from the android SDK so I'm lost as to why this is happening
I'm running the I9020T on Wind
Fix: Turns out it was just a driver issue, following these instructions got it working for me
Part 1 - Drivers
1 - Download Android SDK
2 - Unzip & launch "SDK Manager.exe"
3 - Cancel the first popup & go to "Available packages" > "Third party Add-ons" > "Google Inc."
4 - Select "Google USB Driver package" & click "Install Selected"
5 - Once you're finished go to your SDK installation "extras\google\usb_driver" dir
6 - (MOD EDIT: Ignore this step for i9020A models) Open "android_winusb.inf" and add the following lines to both "[Google.NTx86]" and "[Google.NTamd64]" sections :
;
;Google Nexus S GT-i9023
%SingleAdbInterface% = USB_Install, USB\VID_18D1&PID_4E20
Click to expand...
Click to collapse
as described here [SOLVED] Google Android USB drivers - Nexus S SCLCD GT-i9023 not recognized
7 - Turn Off your SNS
8 - Make sure the SNS is connected to the PC via the USB cable
9 - Boot the SNS into the Bootloader Interface, by holding Volume UP & Power button
It reads LOCK STATE - LOCKED
Open Device Manager (or run devmgmt.msc) make sure you don't see this problem (windows failed to identify the SNS and install the correct drivers)
10 - Do a right click and select Update Driver Software
11 - Select Brose my computer for driver software
12 - Point it to your Android SDK installation "extras\google\usb_driver" dir
13 - Make sure to CLICK "Let me pick from a list of device drivers on my computer"
14 - Then from the list 3 choices select Android Bootloader Interface
15 - If it's installed properly it should show up like this (reboot is not required)
NOTE: if you encounter problems like question marks, unknown drivers, or exclamation marks eve after you have installed the drivers, download and try the USBDeview 32/64 to remove and uninstall all the junk USB devices from your computer/registry
Click to expand...
Click to collapse
Turn on usb debug inside the os.
Then do adb reboot bootloader
Once in bootloader do fastboot oem lock
Hope this helps
Sent from my Nexus S 4G using XDA
Unfortunately i've tried that, nothing happens after I enter fastboot lock
Once you unlocked your bootloader you can not lock it again.
Tom Foolery said:
Unfortunately i've tried that, nothing happens after I enter fastboot lock
Click to expand...
Click to collapse
Do you have a custom recovery installed? Did you try a different usb cable?
1. connect the USB cable directly to USB port on the laptop/desktop; dont connect via monitor USB or extension
2. Open device manager and check if the device is detected as ADB; you need to have the drivers installed
3. perform "fastboot oem lock"
or
Follow the step by step instructions here
zonesan said:
Once you unlocked your bootloader you can not lock it again.
Click to expand...
Click to collapse
Not true, i've done it...as have many others...
gullu101 said:
Not true, i've done it...as have many others...
Click to expand...
Click to collapse
Thanks very much, I always thought we can't lock back the bootloader.
gsrdemon said:
1. connect the USB cable directly to USB port on the laptop/desktop; dont connect via monitor USB or extension
2. Open device manager and check if the device is detected as ADB; you need to have the drivers installed
3. perform "fastboot oem lock"
Click to expand...
Click to collapse
I've tried these steps and I used the guide from nexusshacks but it didn't work.
Do you have a custom recovery installed? Did you try a different usb cable?
Click to expand...
Click to collapse
Although it probably didn't work because before I started the tutorial I installed a ROM which removed Clockwork recovery. I'm going to reroot my phone and try again from the beginning.
Edit: wait that's a lie, I did this a week ago so I'm not 100% sure what I did now, but I'm pretty sure I used the ROM from the guide
I've tried flashing a new recovery but I get the same "waiting for device" message
This makes me think it's a usb issue. I've been having usb issues for a while now, I've tried different cords and different computers. Is there any options I have left.
EDIT: Now I'm almost 100% sure the only thing standing in my way is the USB problems.
Try installing pdanet and using their drivers. Although i doubt this will work as im almost sure that the fastboot drivers arent the same as the adb drivers. Try disconnecting ng and reconnecting your phone on usb once you boot into bootloader.
Sent from my Nexus S 4G using XDA
Hi,
I tried a lot of other rooting applications and have had no luck with any of them. Then I found Wug's Nexus Root Toolkit. It works for my Nexus 4 (Jelly Bean 4.3) - until I came to the "Full Driver Configuration Guide" - where it gives a message: "ADB device was not found".
I have tried it over several times to no avail. Can anyone offer any clues as to what may be causing this?
btw, I am running the Wug's Nexus Root Toolkit v1.7.2 on Windows 8.
Thank you,
David
I was just having the same problem, and I realized after a while that I was making the STUPID mistake of not noticing that my phone was asking me to confirm USB debugging when the toolkit started searching for ADB devices. If you're as big of a dummy as I am (or just having an off day), this may be your problem
aaronwebstey said:
I was just having the same problem, and I realized after a while that I was making the STUPID mistake of not noticing that my phone was asking me to confirm USB debugging when the toolkit started searching for ADB devices. If you're as big of a dummy as I am (or just having an off day), this may be your problem
Click to expand...
Click to collapse
I am having the same problem. Where/how does the phone ask you to confirm USB debugging? It asks me when I turn it on, but not again later.
I have tried 3 or 4 different drivers, but, although the device is recognised by Windows 8, it is not recognised by Root Toolkit.
.... toolkits are the the devil...
They promote not learning what you're doing or what's actually happening in your devices so... there's posts like this.
please read this thread before touching your device
studacris said:
.... toolkits are the the devil...
They promote not learning what you're doing or what's actually happening in your devices so... there's posts like this.
please read this thread before touching your device
Click to expand...
Click to collapse
I'm not quite sure how this was supposed to help. My problem is that the ADB drivers do not seem to work on my computer. I have just tried installing the Android SDK (which comes with its own ADB drivers), having first uninstalled all the existing drivers. It did not help.
Not entirely sure where to go from here.
PDAnet's drivers may work. Simply install PDAnet (after uninstalling any previous attempted driver installations) to get the drivers.
studacris said:
PDAnet's drivers may work. Simply install PDAnet (after uninstalling any previous attempted driver installations) to get the drivers.
Click to expand...
Click to collapse
I had installed PDANet from within Root Toolkit, and it didn't work. Just now, I uninstalled everything again, and installed PDANet from their web site. Still get no ADB device in Root Toolkit. [NB I didn't have PDANet on the phone, but it seems to be there now]
I tried running adb from the android SDK, and it says "error: device not found".
However, I noted there was an adb prompt on the phone when I first plugged it in, this time (which I told to always accept).
[Later]
Wierd - it is now a bit further on. This is what I did:
Started PDANet on the phone, and enabled USB tethering.
Started PDANet on the computer, and it connected to the phone. At this point the USB debugging permission thing came up again, and I accepted it (also ticking the box to always accept).
Unticked USB tethering on the phone again.
Stopped PDANet on the computer (right click on icon, exit).
Tried the Root Toolkit again (pressed Root button), it connected to the device, and put it into fastboot mode.
The boot loader appeared on the phone, and the computer said "Checking Fastboot Status".
It seemed to stay like that for ever.
Killed the root toolkit. and tried again.
Left the computer for a while, and when I came back, it had completed.
So, it seems to be working now.
And when you try using fastboot directly instead of the toolkit....... what happens?
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Gesendet von meinem Nexus 4 mit Tapatalk 4
studacris said:
And when you try using fastboot directly instead of the toolkit....... what happens?
Click to expand...
Click to collapse
I type "fastboot reboot" at the command prompt.
It replies "< waiting for device >"
I wait a few minutes.
Then I press ^C and the command prompt returns.
P.S. Changing the USB connection to camera doesn't make any difference to the above.
Best idea i didnt notice too
aaronwebstey said:
I was just having the same problem, and I realized after a while that I was making the STUPID mistake of not noticing that my phone was asking me to confirm USB debugging when the toolkit started searching for ADB devices. If you're as big of a dummy as I am (or just having an off day), this may be your problem
Click to expand...
Click to collapse
Thanx !!!!!!!
cmajetic said:
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Gesendet von meinem Nexus 4 mit Tapatalk 4
Click to expand...
Click to collapse
Thank you so much! This solved it for me :good:
nikkilocke said:
I type "fastboot reboot" at the command prompt.
It replies "< waiting for device >"
I wait a few minutes.
Then I press ^C and the command prompt returns.
P.S. Changing the USB connection to camera doesn't make any difference to the above.
Click to expand...
Click to collapse
I got stuck the same way.
The way to got around was to change connection to camera -> the PC is intalling some drivers,
then turn off the USB debugging -> the PC is again installing some drivers,
then turn on the USB debugging -> "bingo" adb mode recognized by the toolkit
Now I can install and enjoy Kikat 4.4.1 :good:
cmajetic said:
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Click to expand...
Click to collapse
I found the same solution, changing over from MTP to CAMERA suddenly had the toolkit recognise the phone and could boot it to unlock then root it... Previously, I had installed PDA drivers...
I am astonished how PATHETIC nexus phones/tablets are at simply connecting to a PC. I am baffled at the attempt by google to make their devices as UN-plug & play friendly as possible... bizarre! I have a N10, N7 and have had two N5's and all have the same PITA random disability....
grrr...
Mark.
So the Nexus toolkit is able to see the Nexus 7 as a media device but not Windows ?
marcelin99 said:
I got stuck the same way.
The way to got around was to change connection to camera -> the PC is intalling some drivers,
then turn off the USB debugging -> the PC is again installing some drivers,
then turn on the USB debugging -> "bingo" adb mode recognized by the toolkit
Now I can install and enjoy Kikat 4.4.1 :good:
Click to expand...
Click to collapse
So the Nexus 7 toolkit is able to see the Nexus 7 as media device with this method, but not Windows ? That's strange because Windows is supposed to see your files within the Nexus via Mtp mode. Is it that google removed the ability for Windows to be able to see Nexus 7 files in Android kit kat 4.4.2. What should I do then if I simply want to view files inside Nexus as a non root user ? B.T.W I'm currently on stock kitkat 4.4.2 build KOT49H. Therefore, I'd gladly appreciate it if anyone out there would answer this question and thanks in advance. Feel free to PM me on this so we can "talk" about this. : )
cmajetic said:
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Gesendet von meinem Nexus 4 mit Tapatalk 4
Click to expand...
Click to collapse
Success.
Well, mtp connection works perfectly fine in my Windows 7 machine. But on my xp machine I could never get it to work no matter what driver combination I used.
I can see the reason they changed to mtp but I found mass storage to be much more user friendly.
Sent from my Nexus 4 using XDA Free mobile app
as others, I was using WUG kit to get back to stock. I was stuck without USB degugging options. Installing PDAnet did the trick, installing drivers so that I was able to get WUG working. I am now stock. All traces on my tinkering are gone. Later this week I will upgrade to a Galaxy Mega and trade in my Galaxy Nexus that I have loved for 3 plus years.
Stuck on fastboot screen
GranPaSmurf said:
as others, I was using WUG kit to get back to stock. I was stuck without USB degugging options. Installing PDAnet did the trick, installing drivers so that I was able to get WUG working. I am now stock. All traces on my tinkering are gone. Later this week I will upgrade to a Galaxy Mega and trade in my Galaxy Nexus that I have loved for 3 plus years.
Click to expand...
Click to collapse
Hi
Happy New Year to all! unfortunately I am left with the unusable nexus 7 that happened last night.
I was going crazy with the lags with lollipop and was waiting for the 5.0.5 update OTA but the delay was making me go crazy so I decided to take the risk of manually flashing the image using ADB and SDK.
Like many others pointed, I knew how to enable my computer to see my device by switching from MTP to PTP mode from my earlier rooting experience with Samsung, HTC and others. So that was not an issue for me.
I was following a tutorial from androidcentral and half way through I went to check a tutorial on youtube which I think caused the disaster. After I executed the adb devices no devices were detected and like I said I went and changed the MTP mode to off and bingo now my device was detected.
I executed device unlock and currently my device is in unlocked bootloaded state which is displayed in the fastboot screen where I am stuck now. Following the youtube instead of flashing each separately bootloader first and then the factory image I jumped to 'flash-all.bat' command...I saw something say on my command prompt on pc that completed in so many seconds or minutes which led me to get anxious and since no rebooting happened on the device I went and manually tried to press the power button.
From that time I am stuck on the fastboot screen. I can cycle through 'power off', restart booloader, recovery mode and start. But when I select 'restart bootloader' it comes to 'start' in the same mode and when I select that I can see a tiny 'Booting failed' in white letters in tiny fonts on the top left side of the 'Start'. I cannot go past this state.
Since I know the last time I had enabled 'usb debugging' and MTP off before everything went wrong I am presuming those states are still intact. I can see status on 'reboot bootloader' screen that my bootloader is unlocked.
Now, when I try to go through the process again my device is seen in device manager but when I send 'adb devices' command it cannot detect any devices. If my device is usable I can atleast go into settings to see if my MTP state and usb debugging status. Now I don't have that option. I even tried the Nexus Root Toolkit - everything is fine but until it tests the driver to finally say 'ADB device not found'.
After browsing so many posts I spotted there were some posts that said there is some discrepancy between the device id as listed by the driver to what actually is usb.inf, which all is too technical and overboard for me. And finally left me thinking that it is some issue of Windows PC as someone pointed that the ADB device was detected on a MAC. So I am now thinking to give it a shot in a mac machine as a final attempt to recover my device.
Anyone please suggest a solution, apologies if this is covered by someone elsewhere in the forum if so please point me there. I will make sure that from next time I will never do a manual flash of factory image.
please help!
It sounds like you are on top of it, but haven't hit the right combination yet. Thanks for the quote and I am sorry I am unable to offer any help. As mentioned in my post, I have switched to the Galaxy Mega and was pleasantly surprised by the OTA upgrade to 4.4. Now I am trying to figure out how to root it.
When the Nexus 7 is plugged in there is a persistent notification that indicates "CONNECT AS / Media Device (MTP)". In this state adb devices will not show the Nexus. Not exactly obvious why, but I you select the second option "Camera (PTP)" the device is available for debugging. This choice is persistent, and I'm guessing that with a band new device it will connect as MTP until told otherwise
Click to expand...
Click to collapse
Basically, This is my problem. I need to change my Nexus usb configuration from MTP to PTP so that it'll show up on adb devices, but unfortunately I'm softbricked; I cannot get my Nexus to do anything because I can't get it pass the googlescreen.
So my question is; is there anyway to change it from MTP to PTP without having the option to enable it via the tablet?
Bump, can I configure usb through the nexus toolkit? Please help.
What do you mean?
EDIT: Saw the OP now. If you can get into bootloader mode, try flashing a factory image. If that's not the answer you were looking for, please specify your requirements and why you need them.
I don't know what you mean, and I don't understand why you recommended flashing a factory image but I'll try to elaborate.
At the moment, my Tablet doesn't allow for USB Debugging.
It is Soft Bricked, so I can't get into system to enable USB Debugging, as I have accidentally deleted my OS.
I cannot disable MTP either because I cannot access my tablet setting.
WHAT I NEED:
An alternative to accessing these such settings.
To activate usb debug you have to go in "developer options".
To repair "softbrick" you have to flash factory image in "adb sideload" or adb in linux or windows pc.
Yeah since you dleted the OS itself, your only optioons are to either flash a ROM from recovery or flash the factory image.
ivn888 said:
To activate usb debug you have to go in "developer options".
To repair "softbrick" you have to flash factory image in "adb sideload" or adb in linux or windows pc.
Click to expand...
Click to collapse
Not necessarily correct, since it depends on having a working custom recovery that can start an ADB instance. Fastboot flashing is much more reliable.
You DO NOT need USB debugging in recovery or fastboot modes.
USB debugging ONLY applies to a booted OS.
Sent from my Galaxy Nexus
Stop trying to use ADB, use FASTBOOT. There is a sticky at the top of the forum How to flash a factory image using fastboot/return to stock. It has all the information you need to return to a working device. ADB is only useful if you have a working OS, which currently you do not.
Hey Guys,
i tried to Root my Moto E4 but Unfortunally i cant get Fastboot to work under Windows 10 Home 64 Bit on Both my Notebook and my PC. I installed The Motorola Device Manager (Since it comes with drivers) and installed ADB and Fastboot but once i Reboot into Fastboot Mode it wont Recognize it for flashing. The CMD Just Says Waiting for Device. I have expierience with Rooting other Phones but i never had this much Trouble getting Fastboot to work properly. Would be awesome if u could show me a Solution to this since i really want a Custom Rom.
Gesendet von meinem SM-A300FU mit Tapatalk
There's no trick, it just works. I have Windows 10 64 bit as well and no issues. Maybe you need to update your platform tools (adb and fastboot). Using old ones can be a problem.
What command are you issuing? Just fastboot devices ?
Make sure you're not using a USB 3.0 port on your computer.
madbat99 said:
There's no trick, it just works. I have Windows 10 64 bit as well and no issues. Maybe you need to update your platform tools (adb and fastboot). Using old ones can be a problem.
What command are you issuing? Just fastboot devices ?
Make sure you're not using a USB 3.0 port on your computer.
Click to expand...
Click to collapse
Few other thoughts:
- try a different cable; a cable that works for charging and adb communication may not work with fastboot
- avoid external hubs if possible
- be sure to reboot both devices after switching drivers if communication isn't immediately established
Marc_Xperia said:
Hey Guys,
i tried to Root my Moto E4 but Unfortunally i cant get Fastboot to work under Windows 10 Home 64 Bit on Both my Notebook and my PC. I installed The Motorola Device Manager (Since it comes with drivers) and installed ADB and Fastboot but once i Reboot into Fastboot Mode it wont Recognize it for flashing. The CMD Just Says Waiting for Device. I have expierience with Rooting other Phones but i never had this much Trouble getting Fastboot to work properly. Would be awesome if u could show me a Solution to this since i really want a Custom Rom.
Gesendet von meinem SM-A300FU mit Tapatalk
Click to expand...
Click to collapse
When you say you booted to fastboot what do you mean ?
Did use adb and your phone was recognized and then you issued adb command or what method are you using ....
You need to ensure you establish USB debugging connection first & grant authorization ...once link with authorization has been established run adb ...from adb check if recognized run command to boot to fastboot
So start from the top && go down
ARE YOU CERTAIN YOU USED CORRECT METHOD TO TURN OFF DRIVER VERIFICATION ON WINDOWS 10 && YOUR DRIVER ACTUALLY INSTALLED
Last noteworthy point ... when unlocking my motoE4 I had to boot to bootloader ONLY to use fastboot NOT "FASTBOOT"
Hold power + volume button
Excellent troubleshooting from our community. OP has not come back yet to confirm, ask another question, or simply a thanks. (Maybe he got it) Hopefully he gets it sorted.
Maybe the junior members underestimate just how quick and helpful our little community can be.
@Marc_Xperia Do not forget to install AndroidBootloaderInterface Driver Software. *android_winusb.inf*
Thats what my Problem is. I installed the Latest Android Studio, i have gone to SDK Manager. Installed the Android 7.1 Files and USB Drivers and this happens everytime i want to unlock my BL. And yes i disabled Driver Signing on Windows 10. I call it Fastboot Mode since im Used to Xperias so im Sorry i confused anyone.
Marc_Xperia said:
Thats what my Problem is. I installed the Latest Android Studio, i have gone to SDK Manager. Installed the Android 7.1 Files and USB Drivers and this happens everytime i want to unlock my BL. And yes i disabled Driver Signing on Windows 10. I call it Fastboot Mode since im Used to Xperias so im Sorry i confused anyone.
Click to expand...
Click to collapse
When you authorize your adb connection do you tick or select always allow connections from this device ...the fact that your device is listed as *unauthorised* is a clear indication in your previous attempts you didn't authorize to "allways allow connections" from this device
#result _when you reboot authorization is revoked
Enter bootloader mode the old skool way using your buttons..
# MAKE SURE TO SELECT "ALLOW OEM UNLOCK OPTION IN DEVELOPS settings
1.AUTHORIZE TO "ALWAYS ALLOW CONNECTIONS FROM THIS DEVICE"
2.enter bootloader using hardware keys
3.plug in usb
4.run fastboot devices to force fastboot to start deamon ...
5.once fastboot can see your device run oem unlock
6.DO NOT USE USB 3 port so try different USB ports on pc
7. Alternatively use a live USB of Ubuntu minimal to do the job
--- doesn't seem like driver problem if adb can see your device
See if that works
KevMetal said:
When you authorize your adb connection do you tick or select always allow connections from this device ...the fact that your device is listed as *unauthorised* is a clear indication in your previous attempts you didn't authorize to "allways allow connections" from this device
#result _when you reboot authorization is revoked
Enter bootloader mode the old skool way using your buttons..
# MAKE SURE TO SELECT "ALLOW OEM UNLOCK OPTION IN DEVELOPS settings
1.AUTHORIZE TO "ALWAYS ALLOW CONNECTIONS FROM THIS DEVICE"
2.enter bootloader using hardware keys
3.plug in usb
4.run fastboot devices to force fastboot to start deamon ...
5.once fastboot can see your device run oem unlock
6.DO NOT USE USB 3 port so try different USB ports on pc
7. Alternatively use a live USB of Ubuntu minimal to do the job
--- doesn't seem like driver problem if adb can see your device
See if that works
Click to expand...
Click to collapse
I did all of that. Next Problem when i boot the device with Vol Down + Power and select meta mode. I will get only the Motorola Logo or a Normal Reboot into System. I set everything up in Developer Settings. Enabled Debugging and Allow Bootloader Unlock.
Marc_Xperia said:
I did all of that. Next Problem when i boot the device with Vol Down + Power and select meta mode. I will get only the Motorola Logo or a Normal Reboot into System. I set everything up in Developer Settings. Enabled Debugging and Allow Bootloader Unlock.
Click to expand...
Click to collapse
Why select meta mode ? When you are in bootloader you use your volume keys to navigate between meta, recovery& factory reset & meta and you use your power key to select different modes ...what do you want to do in meta mode ?
When you are in bootloader you are essentially in fastboot mode too so it isn't necessary to choose any of the other options unless you are trying to get into recovery which is pointless if you haven't flashed custom recovery yet ..
I Succeded. I Booted into Bootloader with ADB and took a look at Device Manager to install the Driver Properly.
i followed this guide https://forum.xda-developers.com/moto-e4/how-to/guide-unlock-moto-e4-bootloader-unique-t3654275.
Thank you for all of your Replys.
Moto e4 magisk manger trying to instal magisk hide props config says install failed
happymedium22026 said:
Moto e4 magisk manger trying to instal magisk hide props config says install failed
Click to expand...
Click to collapse
Download manually and flash inside recovery yourself
Safety net says the response is invalid does that affect ny device being rooted
happymedium22026 said:
Safety net says the response is invalid does that affect ny device being rooted
Click to expand...
Click to collapse
No it doesn't. That's an error in magisk manager when you hide the manager app itself. Just use a different safetynet checker app if you want to check safetynet.
Why are you posting this stuff in this thread?