I just wiped my stock ROM HD2 (Task29) because I want to install MIUI on it. After the wipe I installed MAGLDR on it (v1.13) but when I rebooted the HD2, I was greeted with the white HTC screen. I hadn't checked my HSPL version and it turned out to be 3.03. So I downgraded to SPL-2.08.HSPL and retried installing MAGLDR. But after reboot, I still get the white HTC screen.
So what am I doing wrong?
Which radio are you on?
If I remember correctly, MAGLDR requires a radio 2.08 and above. Try to flash radio 2.15 and see what happens.
Marvlesz said:
Which radio are you on?
If I remember correctly, MAGLDR requires a radio 2.08 and above. Try to flash radio 2.15 and see what happens.
Click to expand...
Click to collapse
Yes, that was it.
I thought I had 2.15 installed but that was on my other HD2 (I have two). Turned out this one had 2.07. Flashed 2.15 and I was able to install MAGLDR without a hitch!
Related
I read this thread http://forum.xda-developers.com/showthread.php?t=893620
about how to install android 2.2 on HD2, but I can not get MAGLDR 1.13 installed first. I downloaded the package and ran ROMUpdateUtility.exe, it says updating ROM verion 3.14.831.3 to 2.00.000.0, I proceed with next, then the phone went to 4-colour screen mode, shows SPL version is 3.03. Later on, it goes to black screen with only HTC logo the 0% progress bar on. Few minutes later, the installation on my computer said error[262], update error.
I wasn't sure if I need to downgrade the SPL to 2.08, as people said in this thread http://forum.xda-developers.com/showthread.php?t=829954 it does not matter.
My HD2 has the lastest rom listed on HTC - HongKong English support site.
Please advise what I need to do to get MAGLDR installed?
Thank you.
That thread is from before MAGLDR even existed. You need 2.08.HSPL to flash MAGLDR.
You can get all the info you need here .
Skellyyy said:
That thread is from before MAGLDR even existed. You need 2.08.HSPL to flash MAGLDR.
You can get all the info you need here .
Click to expand...
Click to collapse
Thanks for your reply.
I just got the HSPL4 and installed the 2.08.000, not 2.08 SPL on my HD2.
But when I tried to install the MAGLDR 1.13 again, it did the same thing again, it goes to black screen with only HTC logo the 0% progress bar on. Few minutes later, the installation on my computer said error[262], update error.
Any idea?
It seems I need to install 2.08 SPL, not 2.08.000 in HSPL4.
It works fine now.
u need 2.08HSPL and a 576mb ram radio..
I have 448mb ram on my htc hd2 and I heard that it actually has 576mb of ram but it is not activated. I need 576mb of ram in order to install MAGLDR.
so can someone please help and tell me how to activate the 576MB of RAM
thanks in advance
Installed software on phone:
ROM: 3.14.405.2 (04666) WWE
RADIO: 2.15.50.14
HSPL: 3.03.0000
I need 576mb of ram in order to install MAGLDR
Click to expand...
Click to collapse
Not correct.
Magldr will activate the ram for you, you don't need to activate it in advance, and indeed if you did activate it (tmous based rom plus 2.08.50 radio or higher) then flashing magldr will remove the rom that activated it in the first place.
So long as you have a correct radio (2.08.50.x or higher) then magldr will work and the ram unlocked. Without the correct radio magldr wont start till you have flashed correct radio.
I have 3.14 rom and radio 2.15.50 would that work???
Where can I download tmous based rom plus 2.08.50 radio or higher???
hrpearl01 said:
I have 3.14 rom and radio 2.15.50 would that work???
Where can I download tmous based rom plus 2.08.50 radio or higher???
Click to expand...
Click to collapse
The radio you have will work, just flash MAGLDR and then flash CWM (look in the ROM thread foe CWM portition size) and then flash your ROM. Click the guide linked in my sig for more assistance, look for the two complete how to install Android guides I have linked at the top of my guide.
T-Macgnolia said:
The radio you have will work, just flash MAGLDR and then flash CWM (look in the ROM thread foe CWM portition size) and then flash your ROM. Click the guide linked in my sig for more assistance, look for the two complete how to install Android guides I have linked at the top of my guide.
Click to expand...
Click to collapse
But they is the same problem it freezes every time I flash MAGLDR (1.10,1.11,1.12)
it freezes on the white boot screen with htc logo, then I have to install the rom again. I have tried to install it many times.
please help,thnx
HSPL???
Sent From My Fingers To Your Face.....
i think it is normal for the device to get stuck on the htc splash screen after installing magldr...
this is because magldr is just a LOADER...your device still needs a ROM (which was removed when you install magldr)...after flashing magldr, you need to boot into magldr (turn on device and keep holding down the power on button until magldr appears). then, you need to go to the section in magldr for flashing a magldr compatible ROM. just read the stickies, you will find a guide in there that describes ALL of these steps in much more detail.
'
ASCIIker said:
i think it is normal for the device to get stuck on the htc splash screen after installing magldr...
this is because magldr is just a LOADER...your device still needs a ROM (which was removed when you install magldr)...after flashing magldr, you need to boot into magldr (turn on device and keep holding down the power on button until magldr appears). then, you need to go to the section in magldr for flashing a magldr compatible ROM. just read the stickies, you will find a guide in there that describes ALL of these steps in much more detail.
Click to expand...
Click to collapse
No MAGLDR is the ROM on the HD2 until it has a Android or WP7 ROM to boot. So until you give MAGLDR a ROM to flash your HD2 will boot straight into the MAGLDR menu and that is it. The OP is saying that MAGLDR is not even booting up.
At the OP if you have a 2.15.50.xx radio and HSPL 2.08 on your HD2 you should not be having a problem. But like Canontroutman said if you do not have HSPL 2.08 then this is probably your problem. I was under the impression though that if you did not have HSPL 2.08 that MAGLDR would not flash. Which now that I think about it sounds like what is happening to the OP. I just thought you would get a error message from the RUU.
Hi guys. Thanks everyone for the wonderful work you all do.
Today I wanted to try for the first time to flash some NAND stuff.
I installed cLK, then I thought it would have been better MAGLDR so i tried to install it just after cLK.
After the installation, the phone just does not show the MAGLDR boot screen. It stucks at the HTC green logo (of course i keep the power button pressed). The previous working WM rom does not boot.
The only solution i found, is to flash again a wimo rom through ruu_update, from the bootloader (i have hspl4), then I can begin again but MAGLDR will anyway not install properly.
Do you have any suggestion? Thanks.
Sounds like yet another case of not having both spl 2.08.hspl AND an android compatible radio. (2.15.50 for example)
as comes up daily, magldr WILL NOT START without both those criteria filled. It will simply hang on the bootscreen.
thanks for the info.
I had Spl 3.03, I understood that MAGLDR would require 2.08 or above. Radio, is exactely the 2.15.50. What should i do now?
wrong, magldr requires 2.08.hspl ONLY. no other will work.
from magldr thread, post 1 line 4......
You need HardSPL 2.08 before installation!
Click to expand...
Click to collapse
Ok I was moving over Andriod from WM65 Energy rom and started to install the MAGLDR and it seemed to load up fine! But once I rebooted, I just get the Energy ROM screen and it won't go further.
Even if I put it back in to BootLoad mode I can't get ActiveSync to connect to continue!
Any ideas?
WinMo ROMs and Android ROMs need different SPL versions. You should reset your HD2 using this step by step guide: http://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
You should take the latest stock ROM available, since this includes the latest Radio ROM which you need to run most Android ROMs. Afterwards I suggest installing HSPL2.08 and MAGLDR, CWM again.
Ok, I downloaded the stock rom and extracted the RUU and renamed to leoimg.nbh and did the bootloader thing and it didn't work!
What do I try next?
I know I've had to do the Task29 before when it got like this. Is that what I need to do again?
no need for task29.
there are two 'musts' for magldr to work
1 spl MUST be 2.08.hspl ONLY, no other will work.
In bootloader, does teh spl line say 2.08.hspl? no? magldr will not appear, even though it is flashed ok.
2 radio MUST be one that is compatible with the fabled 576meg ram trick, or to put it another way, it must be compatible with tmous phones, or a third way, it must be a x.xx.50. version radio, not a x.xx.51. version. Also, 2.05.50 and 2.06.50 will not work either. The one that came with your phone wont work, (assuming you don't have a tmous, if you DO have a tmous, you dont need to change radio.)
For ease, go flash radio 2.15.50
When both these conditions are met, and only then, magldr will start.
So, as you are now, ,
phone into bootloader
flash 2.08.hspl
phone back into bootloader
flash radio 2.15.50
back into bootloader
flash magldr
restart.
samsamuel said:
no need for task29.
there are two 'musts' for magldr to work
1 spl MUST be 2.08.hspl ONLY, no other will work.
In bootloader, does teh spl line say 2.08.hspl? no? magldr will not appear, even though it is flashed ok.
Click to expand...
Click to collapse
I believe this is my problem! A while back I mistakenly thought HSPL 3 was an updated version so I put it on. It is the SPL-3.03.HSPL. I'm not sure how to get it off and it doesn't seem to connect via activestink and it doesn't seem to wanna upgade off my card. leoimg.nbh is in root and booted in to bootload mode!
g
Just go back to the boot loader, connect your PC via USB and flash HSPL 2.08 over again. The HSPL application scans which SPL is installed and provides you the SPLs you can flash. 2.08HSPL is your choice.
Also search for radio master thread for HD2 in this forum, download and flash latest radio ROM.
Sent from my NexusHD2 using XDA App
Well, tried reloading of HSPL2 and I got an critical error bad SPL version!
I'll be searching around for this new error if anyone has a solution!
Also, if someone has time to get on Skype, I don't mind dropping down a tip!
p
UPDATED:
Ok, the trick was to use HSPL4 and then downgrade to HSPL2! Back on track! For now!!
Ok, the trick was to use HSPL4 and then downgrade to HSPL2! Back on track! For now!!
Click to expand...
Click to collapse
You arent thinking right about exactly what hspl2, 3 and 4 are. There was no need to even use hspl2, hspl4 can set 2.08.hspl
hspl2 hspl3 and hspl4 aren't different 'versions' of hspl in the way you think, , selecting 2.08.hspl using hspl2 or hspl3 or hspl4 gives the very same 2.08.hspl, no difference. The .exe's are just loader programs, the only difference between them is the phone models and spl's each supports. so when you went to stock and no doubt ended up with spl 3.03.0000 hspl2 wouldnt work because it requires a starting spl of 2.08 or lower, as does hspl3.
using hspl4 does work, because it was released for just that reason, to support spl 3.03, its not 'better' or a higher version than hspl3, its just been tweaked to support more spl's.
Hello,
there are a lot of similar topic but none of them answered my question.
General situation looks like this:
after flashing with MAGLDR device is stuck on htc splash screen and doesn't respond to any button
What was already done:
- initially, device had factory 3.14.x WWE ROM with 2.15.50.14 radio. SPL was changed with DFT tool to HSPL 2.08, MAGLDR was flashed with no problems (tried it few times)
Since that didn't worked, this is what I did:
- I recall reading that if someone has 3.14.x ROM then he/she must downgrade to ROM with 1.66.x or 1.72.xx. So I did that with factory ROM, (what struct me is that the SPL wasn't changed), flashed 2.15.50.14 radio, tried MAGLDR 1.13 once again. That didn't work
- since, SPL wasn't changed with official ROM I thought this is the issue here, so I've change it to SPL 3.03 back again and flashed 1.66.x official ROM. Flash procedure did change to SPL 1.42. I changed it to 2.08HSPL with DMT tool once again, 2.15.50.14 radio was flashed, then MAGLDR. It also gets stuck on splash screen.
- Next I've read that something called Task29 will probably fix my issue. So.. I've flashed with original 3.14.x ROM and then went with the process once again but I've run Task29 tool between changing SPL to HSPL 2.08 and flashing MAGLDR. That didn't work either
Additional observations:
- I've changed HSPL 2.08 to SPL 2.08, after that running any flash procedure (MAGLDR or official ROM), will effect with 0% progress
- changing to SPL 3.03 will cure above (at least for official ROM)
- in RUU tool the previous version is never seen (on the screen when you confirm update)
Every procedure was done according to newbie guides available on this forum, I've experience with flashing other OS on couple of HD2 devices, but that is the first one that gives me a hard time.
Any suggestion what I should do next?
forget about continually flashing various stock roms, its not necessary.
forget what's gone before, do this and report back.
Phone into bootloader
connect usb, When 'serial' becomes 'usb' continue.
run hspl4 and choose 2.08.hspl
when it completes go immediately back into bootloader
flash magldr
straight back into bootloader
flash radio 2.15.50
let the phone restart.
report back.
pydzik said:
Hello,
there are a lot of similar topic but none of them answered my question.
General situation looks like this:
after flashing with MAGLDR device is stuck on htc splash screen and doesn't respond to any button
What was already done:
- initially, device had factory 3.14.x WWE ROM with 2.15.50.14 radio. SPL was changed with DFT tool to HSPL 2.08, MAGLDR was flashed with no problems (tried it few times)
Since that didn't worked, this is what I did:
- I recall reading that if someone has 3.14.x ROM then he/she must downgrade to ROM with 1.66.x or 1.72.xx. So I did that with factory ROM, (what struct me is that the SPL wasn't changed), flashed 2.15.50.14 radio, tried MAGLDR 1.13 once again. That didn't work
- since, SPL wasn't changed with official ROM I thought this is the issue here, so I've change it to SPL 3.03 back again and flashed 1.66.x official ROM. Flash procedure did change to SPL 1.42. I changed it to 2.08HSPL with DMT tool once again, 2.15.50.14 radio was flashed, then MAGLDR. It also gets stuck on splash screen.
- Next I've read that something called Task29 will probably fix my issue. So.. I've flashed with original 3.14.x ROM and then went with the process once again but I've run Task29 tool between changing SPL to HSPL 2.08 and flashing MAGLDR. That didn't work either
Additional observations:
- I've changed HSPL 2.08 to SPL 2.08, after that running any flash procedure (MAGLDR or official ROM), will effect with 0% progress
- changing to SPL 3.03 will cure above (at least for official ROM)
- in RUU tool the previous version is never seen (on the screen when you confirm update)
Every procedure was done according to newbie guides available on this forum, I've experience with flashing other OS on couple of HD2 devices, but that is the first one that gives me a hard time.
Any suggestion what I should do next?
Click to expand...
Click to collapse
if what the friend above suggested doesnt work, then give us the details about your device. i have a Tmous and im in Europe and went through hell until i got it right...if you do it then flashing the rom you want is a piece of cake!
samsamuel said:
Phone into bootloader
connect usb, When 'serial' becomes 'usb' continue.
run hspl4 and choose 2.08.hspl
when it completes go immediately back into bootloader
flash magldr
straight back into bootloader
flash radio 2.15.50
let the phone restart.
report back.
Click to expand...
Click to collapse
Did that, phone had initially SPL 1.42 and 1.66.x ROM. I didn't let him boot between steps, just went to bootloader each time... and I'm still stuck at splash screen with no response to any key.
sofialoca said:
if what the friend above suggested doesnt work, then give us the details about your device. i have a Tmous and im in Europe and went through hell until i got it right...if you do it then flashing the rom you want is a piece of cake!
Click to expand...
Click to collapse
What details would you like to know?
pydzik said:
stuck at splash screen with no response to any key.
Click to expand...
Click to collapse
that behavour is expected when either spl ISN'T 2.08.hspl and/or radio isn't correct. The only other reason for magldr not showing up must be a faulty device.
Well... I can flash it with every HTC official ROM, and it works, calls can be made, wifi works fine, no spontaneous reboots or freezes...
Made two other observations:
1. On the device that is stuck on splash screen there is an additional bar in boot loader saying "Security unlocked", just like in this thread: http://forum.xda-developers.com/showthread.php?t=1501745
2. I've started to look at different boot loader screens across the net, and it seems that majority of them has HX-BC (mine has different) version after the board PB81100 name. I've also compared bootloader screen after changing SPL to HSPL 2.08 on two different devices. The values before and after CotullaHSPL were different.
What should I do now? Searching for a method to remove that "Security unlocked" string or give up since the version of my board won't be able to run MAGLDR?
My device is not TMOUS, it is 512MB device.
Edit: after some research I think that my device has NAND-Flash ROM from Samsung not Hynix, so different flash algorithm should be used. I'm now going for a low-level research. If that is the case, than I think MAGLDR needs version 1.14 ... will report later.