Just got this net gear high performance router. I connected to the 5 ghz band not the 2.4ghz and it acted like it didn't speed up the browsing much if at all. Download speed was around 2.5mbs. Rechecked to make sure I was on the 5ghz and it was. So I rebooted then rechecked the speed and got around 5.5mbs download speed. But after about 4 5 hours of playing around on the browser its like it starts slowing back down again sometimes so bad the page I'm trying to open just stops and the browser closes. Not force closes. But like I hit the home button. Reboot and its OK for a few hours again. I only keep one tab open to by the way just to keep from using any more memory. If I root and try a different kernel dose anyone know that this will go away?
A 5ghz router will not speed up your browsing over a 2.4ghz router, If you're only getting 5megs down anyways. Now if you had a 100meg connection maybe.
It also will have nothing to do with the fact that the browser gets slow over time.
High speed wireless routers are more about sharing content between computers on your wireless network.
but before I got this 5ghz router all I had was a 2.4 and my laptop wouldn't even play a YouTube video without stopping ever 10 seconds. Now with the new one its done buffering before I can smell my fart. It speeds up my internet like Ive never seen.
ericman77 said:
but before I got this 5ghz router all I had was a 2.4 and my laptop wouldn't even play a YouTube video without stopping ever 10 seconds. Now with the new one its done buffering before I can smell my fart. It speeds up my internet like Ive never seen.
Click to expand...
Click to collapse
Are you connecting to the router on the 5ghz frequency? Most laptops don't even have this capability.
If there was a lot of 2.4ghz interference around it may have had something to do with it.
Think about it, why would a 5meg connection that you were already maxing out at 802.11g (54mb/s) get any faster at a different frequency?
I'm pretty sure its more of a router issue. Try a different channel. Default is usually 7. If you are in a populated area there are probably a lot of others using that channel as well.
Download wifi manager in the market https://market.android.com/details?id=org.kman.WifiManager&feature=search_result
See which channel is the cleanest and use that one. Hope that helps!
Bauxite said:
Are you connecting to the router on the 5ghz frequency? Most laptops don't even have this capability.
If there was a lot of 2.4ghz interference around it may have had something to do with it.
Think about it, why would a 5meg connection that you were already maxing out at 802.11g (54mb/s) get any faster at a different frequency?
Click to expand...
Click to collapse
Yes the lap top dose support it. The wife was about to give up on it because it wouldn't do what she wanted it to now its perfectly fine. But I was just wondering why my xoom is slowing down after a while till a reboot. I just did the speed check again on my 2.4 band and it was the same as it used to be around 2.5mbs download speed. Then reconnected to the 5.0 ghz on the dual band wireless router and it jumped up to 6.4 mds download speed on speed test app.
Well I don't know? I was thinking that the 2.4 channel was slower than the 5.0 one but now they are both the same speed. And I was under the impression that 5.0ghz is faster than 2.4ghz but they're not they're just two different channels or frequencies I guess? I've just never delt with one of these fancy wireless routers before just stuck with what was installed by the cable guy. Maybe I can try keeping the cache clean in my browser and see how it dose.
just based on my limited understanding of wireless networking (slash basic physics), the higher frequency has the only benefit if being on a less populated channel. (More traffic means slower soeeds, more intereferemces, missing packets, etc...). I believe that the higher frequecy also degrades faster/ doesn't penetrate walls as well because it carries less energy, but I've never tried it myself. Just see what works best with some trial and error.
ericman77 said:
but before I got this 5ghz router all I had was a 2.4 and my laptop wouldn't even play a YouTube video without stopping ever 10 seconds. Now with the new one its done buffering before I can smell my fart. It speeds up my internet like Ive never seen.
Click to expand...
Click to collapse
Do you fart everytime you play a video? Maybe your nose is getting used to it so it only seems faster. I would hate to walk into your computer room after you've been inthere watching youtube.
I have the exact same problem, I have the netgear wndr3700, and the xoom does slow down after a while and a reboot fixes it. Ive tried both the 5 and 2.4 ghz and its the same story where it won't finish loading pages. I'm actually exchanging my router tomorrow for the wndr3400 because what I have now is overkill for my needs. What router do you have?
i had the same issues with the Linksys E4200. I was upset because my wife's 1st Gen ipad was blowing me out of the water in browsing speed. Then she had to nerve to ask "so why did you spend $600 on this?". Switched to 2.4 and everything is fine now. Better than fine actually. Now that I saw the 5ghz settings I may try again.
TurboTsi said:
I have the exact same problem, I have the netgear wndr3700, and the xoom does slow down after a while and a reboot fixes it. Ive tried both the 5 and 2.4 ghz and its the same story where it won't finish loading pages. I'm actually exchanging my router tomorrow for the wndr3400 because what I have now is overkill for my needs. What router do you have?
Click to expand...
Click to collapse
have you guys tried flashing dd-wrt over the stock firmware on the netgear?
i have the same router and first thing i did when i got the router was flash dd-wrt on it... think of dd-wrt as a custom rom for your router
i'm connected to the 5ghz channel and its been working great for me but i don't surf on my xoom that long as some of you have....
Does anyone notice there's a big bug with WiFi on the G2?
I have 2 WiFi ac routers, one at home and one at the Office, an Asus RT-ac66U and a Linksys ea6700. Both capable of 1750mbps max speeds.
Internet speeds are 120/6 and 200/20.
Scenario is exactly the same for both routers;
When fresh reboot the router, G2 connects at a speed of 433Mbps.
Speedtests show results of 119/6 at home and 190/20 at the office.
Great you would say!
But here goes. Once WiFi get disconnected and reconnected, speeds go down to ~40mbps. No matter what I do!
These are N speeds, not AC
When looking at connection settings it still shows a link of 433mbps
Tested dozens of times, on both routers, so it has to be an issue with the G2.
Anyone else noticed the same??
DAMN, should have been in Q&A, mods plz move
I'm not an expert on wi-fi, but have stumbled through setting up several routers around the house. But I do not have an ac router.
Is the home router in mixed mode? Ignoring a/b/c for a moment and focusing on g and n (and implying ac), I have two wireless routers in the house. One runs N only (but both 2.4 ghz and 5 ghz) and the other runs G only. Now, my N router is capable of running in mixed mode (to handle both N and G) BUT in mixed mode, my max speed when connected in N is lower than it would be if I ran in dedicated N mode.
Most of my devices now are at least N (2.4 or 5) but I have an older printer and wii that only do G. But as mentioned above, rather than run my best router in mixed mode, I run 2 separate routers, one in N only and one in G only.
Maybe something similar might help with your ac speeds?
Really appreciate your input!
But I already tried settings like AC only etc. Doesn't make any difference.
Once connected for the second time and up to the router no more AC speeds...
Sent from my LG-D802 using XDA Premium 4 mobile app
Is there a way to test LAN speeds on Android? I have the same Asus router but my wan speeds are so pitiful that I wouldn't be able to tell if the phone was dropping to N speeds. If I could test speeds to my desktop across the local network I might be able to test what you are experiencing.
Sent from my VS980 4G using Tapatalk
Is there a way to check on the phone, which band it's connecting to? I haven't found anything.
I have the same router and my issue is on reconnect. I leave my wifi on all the time. When I get home, it connects automatically the moment I pull up to the house. The problem is, the speed is severely crippled. Range is awesome, speed is bad. I have to cycle the wifi and reconnect. Once done, no more problems.
One thing I should note, I was having the same issue occasionally on my Droid RAZR after getting the ASUS. Does anyone know if they use the same wifi hardware? Maybe it's an issue with the router itself?
jasonsf said:
Is there a way to test LAN speeds on Android? I have the same Asus router but my wan speeds are so pitiful that I wouldn't be able to tell if the phone was dropping to N speeds. If I could test speeds to my desktop across the local network I might be able to test what you are experiencing.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
crashN2u said:
Is there a way to check on the phone, which band it's connecting to? I haven't found anything.
I have the same router and my issue is on reconnect. I leave my wifi on all the time. When I get home, it connects automatically the moment I pull up to the house. The problem is, the speed is severely crippled. Range is awesome, speed is bad. I have to cycle the wifi and reconnect. Once done, no more problems.
One thing I should note, I was having the same issue occasionally on my Droid RAZR after getting the ASUS. Does anyone know if they use the same wifi hardware? Maybe it's an issue with the router itself?
Click to expand...
Click to collapse
@jasonff
Don't know about an app to test lan speeds unfortunately.
Think a google search would come up with lots of options.
@crashN2u
I leave my wifi on too all the time for now, it keeps it at full speed then.
There's no way to check which band you are connected to.
Router doesn't have an option to choose AC Only, only N +AC
And in the mean time I have tested it with 4 AC routers, Asus RT-AC66U, Netgear R6250, Linksys EA6700, D-Link 868L.
With all routers exactly the same conclusion. First time everything is great. Excellent speeds. If you never turn off WiFi it remains at high speed.
But once you turn off WiFi on the Phone and turn it back on it immediately drops to ~36-40mbps max (N Speeds).
This remains until I rebooted each router and after that full speeds again.
It must be something in drivers LG used.
There's the solution to for, I'm sure of it by now.
Well, I can see I won't be much help -- especially since the same result on 4 routers!
I am not sure if the following app supports AC, but a very helpful and free app I use is called "Wifi Analyzer". I can't post links but that is the exact name (author = farproc).
It has many useful tools/functions that you may find helpful, switchable between 2.4 and 5.0 ghz, channel scanner, etc.
Does your 2.4 ghz N and 5.0 ghz N/AC have different SSID's? From what I read, AC is 5 ghz only and N can be either 2.4 ghz or 5.0 ghz. I wonder if you are dropping from 5.0 AC to 2.4 N because the 2.4 N is being detected as "stronger signal" than the 5.0 AC at reconnect time?
I named my 2.4 ghz N SSID as "Blah" and 5.0 ghz N SSID as "Blah_5ghz" just so I know what frequency I'm on at a glance (using a widget that shows the SSID) but many routers by default will have both SSID's the same, making it less obvious what band you are connected to. I also use an app called "WIFI Prioritizer" (author Robert Botha), which will allow me to connect or re-connect in the SSID order I specify: i.e. when I get home I will connect to SSID "Blah" (2.4 ghz N because it has the longest range). Every 5 mins (you can specify), it checks to see if my SSID "Blah_5Ghz" is in range and will switch to it if it is (you can also set signal strength connect and disconnect thresholds).
Anyways, I probably can't help further but am following this thread with interest. Good luck!
Klotar said:
Well, I can see I won't be much help -- especially since the same result on 4 routers!
I am not sure if the following app supports AC, but a very helpful and free app I use is called "Wifi Analyzer". I can't post links but that is the exact name (author = farproc).
It has many useful tools/functions that you may find helpful, switchable between 2.4 and 5.0 ghz, channel scanner, etc.
Does your 2.4 ghz N and 5.0 ghz N/AC have different SSID's? From what I read, AC is 5 ghz only and N can be either 2.4 ghz or 5.0 ghz. I wonder if you are dropping from 5.0 AC to 2.4 N because the 2.4 N is being detected as "stronger signal" than the 5.0 AC at reconnect time?
I named my 2.4 ghz N SSID as "Blah" and 5.0 ghz N SSID as "Blah_5ghz" just so I know what frequency I'm on at a glance (using a widget that shows the SSID) but many routers by default will have both SSID's the same, making it less obvious what band you are connected to. I also use an app called "WIFI Prioritizer" (author Robert Botha), which will allow me to connect or re-connect in the SSID order I specify: i.e. when I get home I will connect to SSID "Blah" (2.4 ghz N because it has the longest range). Every 5 mins (you can specify), it checks to see if my SSID "Blah_5Ghz" is in range and will switch to it if it is (you can also set signal strength connect and disconnect thresholds).
Anyways, I probably can't help further but am following this thread with interest. Good luck!
Click to expand...
Click to collapse
My Phone is packed with tools like Wifi Analyser, InSISDer etc etc atm
I always separate 2.4 and 5ghz networks to be able to see exactly what's going on but thanks for the heads up :good:
From further investigation and thinking, and with your suggestion about stronger signals;
Thing is, AC routers are more or less all simultanious routers.
That combines 2.4 and 5ghz signals for higher transfer speeds.
I think in there lies the problem when drivers are not 100%.
In theory 2.4 signals are stronger then 5ghz signals and have wider range.
But in testing I made sure that I was in the same room and no more than 2 meters away from the router.
when testing it showed equal signal strength up to -20 so really strong signals.
Therefore I concluded that N on 2.4 whas equally strong as 5ghz and then again I isolated 5ghz SSID so that's not it unfortunately.
I promised to stay away but I can't resist!
Have you tried some of the more generic troubleshooting tips (on the home network), such as trying with no security or lesser security (WEP) to see if it still reconnects at the lower (N) speeds? I realize that usually that test is of course for a more basic issue than yours but maybe the G2 has trouble handling security overhead.
Some devices and routers just don't like each other (as many know), but 4 different routers...?! Gotta be the G2 side, as you've surmised. Wish I knew someone with an ac router so I could test myself. I'm debating on getting an ac router but you've got me spooked! (kidding/teasing)
Well haven't tried lower or no security.
When I have the chance (aka the wife is away and not *****ing about wifi not available ) I'll sure try that.
But I don't think that WEP will be an option because AC requires AES protection if I'm not mistaken.
But really do not be afraid to get yourself an AC router hehe.
No honestly, I've tested 4 routers with:
AC Capable:
HTC One. Goes all the way to max isp speeds. All the time, no issues
LG G2.
Not AC Capable.
IPhone 5. Max speed at 5ghz (constantly tested) is ~90-100mpbs.
HTC One X. Max speed at 5ghz (constantly tested) is ~70-90mpbs.
So even if your hardware maybe not be capable of AC speeds you still get excellent connections
Oh and for the record.
Here's my personal listing of the hardware I've tested. From best to well not so good.
1. Netgear R6250.
Excellent constant speeds. No drops whatsoever with around 6 devices connected. Excellent range!
2. Asus RT-AC66U
Shame Asus introduced a new wifi driver some time ago which doesn't perform that well. Constant speed drops.
They know about it but thusfar no solution.
When you get this one, stay on old firmware for now!
3. D-link 868L
Real looker this one. Can be put in plain sight in the room like a picture frame :silly:
Great constant speeds, but some drops here and there.
Excellent range.
4. Linksys EA6700
Linksys is sold to Belkin by Cisco.
Up to now I have never seen anything good coming from Belkin!
What a piece of crap.
With a really thin wall between router and phones coverage went down more dan half. Hell even when distance less than 2 meters away coverage was about -45.
Do not get this crap!
I wonder... the wireless N spec (not sure if also AC) calls for devices and routers to have a 'low power mode', which may or may not be enabled in routers and/or phones (e.g. GS3) by default. According to some article I read, newer routers may go into a power saving mode if it detects low traffic and supposedly ramp up when the traffic increases.
Possibly it doesn't ramp up fast enough when a new device connects and the device mistakes it for not having the highest speed (AC) capability. Might explain fast speeds after router bootup but not later. If there is any truth to that (no clue here), it might speed itself up either by testing with a larger file or seeing if the "2nd connect" condition changes while say, streaming videos from the PC to the Xbox or watching Netflix on the main TV. Certainly, either would be considered high traffic and if there is no change to the 2nd connect, well -- there goes that idea.
Is there a wifi power saving mode on the G2 like there is on the GS3? (i.e. dialing *#0011# to turn it off).
Klotar said:
I wonder... the wireless N spec (not sure if also AC) calls for devices and routers to have a 'low power mode', which may or may not be enabled in routers and/or phones (e.g. GS3) by default. According to some article I read, newer routers may go into a power saving mode if it detects low traffic and supposedly ramp up when the traffic increases.
Possibly it doesn't ramp up fast enough when a new device connects and the device mistakes it for not having the highest speed (AC) capability. Might explain fast speeds after router bootup but not later. If there is any truth to that (no clue here), it might speed itself up either by testing with a larger file or seeing if the "2nd connect" condition changes while say, streaming videos from the PC to the Xbox or watching Netflix on the main TV. Certainly, either would be considered high traffic and if there is no change to the 2nd connect, well -- there goes that idea.
Is there a wifi power saving mode on the G2 like there is on the GS3? (i.e. dialing *#0011# to turn it off).
Click to expand...
Click to collapse
Good point!
Well, there is a setting in wifi, advanced to minimize use of wifi when screen is off. Sounds like a power save mode to me.
But, just tested it and that makes no difference.
With that setting deactivated on the G2 still at first boot AC speeds and when I switch off and on wifi I still get N speeds max.
And besides that, on the Asus router there's a setting called "Enable WMM APSD". Which stands for "Automatic Power Save Delivery".
I read up on that and the custom firmware guru RMerlin writes about that setting that especially Android devices could suffer from that setting.
So I disabled that a long time ago.
On other routers I couldn't find such setting.
But to iron that setting out I just tested it once more.
First with setting off. Still first connect AC speeds, after turn off/on back to N speed.
Then turned wifi off, enabled the setting and rebooted the router.
But this time to let the supposedly power save kick in I let my Phone idle for 15 minutes so that it surely was in deep sleep.
Then turned screen on, and again AC speeds when first connected.
After that turned wifi off, screen of for 15 minutes. Turned screen on again and once more N speed.
And link speed is always shown as 433mbps btw, which is correct.
There's just some bug in driver code by LG which doesn't work correctly.
I'm more and more convinced of that.
For now I just keep wifi on all the time so that I always get full speeds.
Batt is capable enough so no problem there
LittleH79 said:
Good point!
Well, there is a setting in wifi, advanced to minimize use of wifi when screen is off. Sounds like a power save mode to me.
But, just tested it and that makes no difference.
With that setting deactivated on the G2 still at first boot AC speeds and when I switch off and on wifi I still get N speeds max.
And besides that, on the Asus router there's a setting called "Enable WMM APSD". Which stands for "Automatic Power Save Delivery".
I read up on that and the custom firmware guru RMerlin writes about that setting that especially Android devices could suffer from that setting.
So I disabled that a long time ago.
On other routers I couldn't find such setting.
But to iron that setting out I just tested it once more.
First with setting off. Still first connect AC speeds, after turn off/on back to N speed.
Then turned wifi off, enabled the setting and rebooted the router.
But this time to let the supposedly power save kick in I let my Phone idle for 15 minutes so that it surely was in deep sleep.
Then turned screen on, and again AC speeds when first connected.
After that turned wifi off, screen of for 15 minutes. Turned screen on again and once more N speed.
And link speed is always shown as 433mbps btw, which is correct.
There's just some bug in driver code by LG which doesn't work correctly.
I'm more and more convinced of that.
For now I just keep wifi on all the time so that I always get full speeds.
Batt is capable enough so no problem there
Click to expand...
Click to collapse
I found a tool to test local network speed. It uses two android devices for a p2p test or you can install a server program on your PC. I'll do some testing and see if I can reproduce what you are seeing. Here's the link: http://pzoleeblogen.wordpress.com/2013/08/12/local-network-speed-test-for-android/ and the market link: https://play.google.com/store/apps/details?id=com.pzolee.android.localwifispeedtester&hl=en
And to be sure I understand, you boot your phone with wifi on, AC speeds. Turn off wifi on phone and turn it back on, N speeds. Reboot phone with wifi on, back to AC speeds. Correct?
jasonsf said:
I found a tool to test local network speed. It uses two android devices for a p2p test or you can install a server program on your PC. I'll do some testing and see if I can reproduce what you are seeing. Here's the link: http://pzoleeblogen.wordpress.com/2013/08/12/local-network-speed-test-for-android/ and the market link: https://play.google.com/store/apps/details?id=com.pzolee.android.localwifispeedtester&hl=en
And to be sure I understand, you boot your phone with wifi on, AC speeds. Turn off wifi on phone and turn it back on, N speeds. Reboot phone with wifi on, back to AC speeds. Correct?
Click to expand...
Click to collapse
Thanks for the app!
Gonna test this for sure since I also have a HTC One lying around which is also AC capable
Not 100% corect.
I can do with phone what I want until wifi gets turned off.
Then a reboot of the router is required to get AC speed back.
No need to reboot the phone.
Quite busy atm so don't have enough time I would like to be testing
LittleH79 said:
Thanks for the app!
Gonna test this for sure since I also have a HTC One lying around which is also AC capable
Not 100% corect.
I can do with phone what I want until wifi gets turned off.
Then a reboot of the router is required to get AC speed back.
No need to reboot the phone.
Quite busy atm so don't have enough time I would like to be testing
Click to expand...
Click to collapse
Between my wife on her laptop, my son on his Chromebook and my daughter streaming Netflix on our Roku, I hardly ever have a chance to reboot the router without someone complaining
Since I haven't rebooted my router in days, from what you are saying I shouldn't see anything above N speeds until I reboot the router. Do you actually have to turn off wifi on the phone to have it drop from AC to N or is it enough to leave the range of the wifi and then come back? And does if turning it off is required, do I have to be connected to the router at the time I turn phone wifi off?
I'll try testing this weekend.
jasonsf said:
Between my wife on her laptop, my son on his Chromebook and my daughter streaming Netflix on our Roku, I hardly ever have a chance to reboot the router without someone complaining
Since I haven't rebooted my router in days, from what you are saying I shouldn't see anything above N speeds until I reboot the router. Do you actually have to turn off wifi on the phone to have it drop from AC to N or is it enough to leave the range of the wifi and then come back? And does if turning it off is required, do I have to be connected to the router at the time I turn phone wifi off?
I'll try testing this weekend.
Click to expand...
Click to collapse
Going out of range isn't a problem as long as you don't have an app or setting on in wifi, advanced to switch off wifi.
As long as wifi isn't turned off I can go everywhere, in&out of range, other routers connect but speeds remain AC, everywhere on every router.
I can reproduce everytime that when I turn off wifi on the phone and back on from then on I only get ~36-40mbps max.
It's like the phone thinks that's max capable speed altough wifi link speed is again shown as 433mbps.
If I have switched off wifi on the phone and back on, on all 4 AC routers I tested all needed a router reboot to gain full AC speeds again.
Oh and maybe a small tip, I always say to the misses at home that there's a small problem with connection so a quick reboot is required.
Up to now that still works
LittleH79 said:
Going out of range isn't a problem as long as you don't have an app or setting on in wifi, advanced to switch off wifi.
As long as wifi isn't turned off I can go everywhere, in&out of range, other routers connect but speeds remain AC, everywhere on every router.
I can reproduce everytime that when I turn off wifi on the phone and back on from then on I only get ~36-40mbps max.
It's like the phone thinks that's max capable speed altough wifi link speed is again shown as 433mbps.
If I have switched off wifi on the phone and back on, on all 4 AC routers I tested all needed a router reboot to gain full AC speeds again.
Oh and maybe a small tip, I always say to the misses at home that there's a small problem with connection so a quick reboot is required.
Up to now that still works
Click to expand...
Click to collapse
I just did a few tests from my phone to my pc with 100MB data sets. I got between 200 and 260 Mbit/s down both before and after toggling my phone's wifi off and on. Didn't seem to make a difference. I got about 6Mbit up.
So, I didn't seem to experience the problem you have. But try repeating what I've done with this local network app. Maybe you won't have the issue with it that you are seeing on your WAN connection.
jasonsf said:
I just did a few tests from my phone to my pc with 100MB data sets. I got between 200 and 260 Mbit/s down both before and after toggling my phone's wifi off and on. Didn't seem to make a difference. I got about 6Mbit up.
So, I didn't seem to experience the problem you have. But try repeating what I've done with this local network app. Maybe you won't have the issue with it that you are seeing on your WAN connection.
Click to expand...
Click to collapse
What router or AP do you use?
/s
shaglord said:
What router or AP do you use?
Click to expand...
Click to collapse
Asus RT-AC66U
jasonsf said:
Asus RT-AC66U
Click to expand...
Click to collapse
Wow and do you really see real transfer rates of 25-30 MB/s to your G2?
I'm using a Qualcomm Atheros based AC-router and my G2 (running latest CM11) hardly goes over 10 Mbit ~ 1,5 MB/s. Weak I know. (Confirmed 433 Mbit link using a wifi app.)
Maybe I need a broadcom-router like yours to see some real AC-speeds.
Thanks for the reply. Take care
/s
Just got the new shield tv box and my wifi speeds are incredibly slow. Get 100 mbps on all my other devices, but 5 mbps.
Anyone know of a solution?
i have exactly the same problem on 2.4ghz wifi. i even put the router right next to the shield tv. still only 6-10mbit (max. 15mbit) while i have a 100mbit connection from my provider. on the 5ghz wifi i get about 60mbits but on both i have huuuuuuuuge packet loss every 3-7s. makes gamestream impossible :/
i even bought a new router. tried with my standard fritzbox 7390 and now with a new linksys wrt1200ac. results are the same slow and bad connections to shield. everything else (i.e. notebook, smartphone, pc) works just fine...
Unplug any peripherals connected via usb and try again. This means wireless mouse, usb hub, etc.
I've found the only way to get consistent speeds with the shields wifi is to use a usb hub that has it's own power source.
Can confirm. Having an extremely hard time streaming anything in 4K on Netflix. 350 mbps Download and 30 mbps Upload. Netflix network speed test shows like 29 mbps... I installed a browser and went to Fast.com and get about 80 mbps. Downloaded the "Fast" app on my Pixel XL and immediately got 250 mbps down standing in the same room connected to the same 5 GHz Wireless-AC network. Amazon Prime eventually decides to stream in UHD and HDR, but it takes a while. Youtube, oddly enough, streams in 4K almost immediately.
Router is an ASUS RT-AC1900P.
I'm still having issues. Has anyone solved this problem?
There was an update recently and the performance in Plex seemed to get a little better, but high quality videos still stop and buffer.
Are there any debug tools on the shield that could be used?
Ok so I had terrible performance on 2.4ghz. on 5 GHz it only connected once so decided to have a look at my modem settings and tweaked it.
Have it set to
802.11a/n/ac mixed
Channel auto channel 112
20/40/80 MHz
Everything working smoothly now with no dropouts
I'm having the exact same issue with my new 2017 Shield. If I restart the Shield, it will occasionally work at full speed on 2.4 OR 5 Ghz. But most of the time, it's under 10 mbps - transferring from the internet OR from my PC that is hardwired to my router. I already had an RMA done, and I'm having the same issue with the new Shield NVIDIA sent me. I've tried every channel possible, used tools to find the proper channel, etc. Same slow speed. None of my other devices have the same issue, even in the same location. Nothing is attached via USB.
What's the deal? Any solutions?
Having problems as well. I have my wirless router I'm a good distance running 350mbs and I can pass the test for the games. When I try to play the games they instantly show I'm having wifi problems.
I have discovered that my US996 Unlocked and rooted device has typical down/up speeds of 90d/55u when the phone is not being charged. When the phone is connected to a charger the typical speeds are 400d/270u. This is very repeatable. The phone is 3 feet from the router. am using speed.net and the ping is 4 to 5 ms for both configurations. If I start the test with no charger and plug the charger in during the test the speed increases dramatically to the higher values. The verizon.net speed test for the router on my gigabit plan was fairly consistent at 948d and 931u. Is there a way to get the higher WiFi throughput while not connected to a charger?
Which router are you using btw ?
90 Mbs down seems like single stream N, on 2.4Ghz
400 Mbs down is single stream AC at 5Ghz
Can you check what your link speed says in the wifi props on the phone
the single sim V20 is dual stream so you'd expect a doubling of that speed, should be able to do 800Mbs on AC and 180 Mbs on N at 2.4ghz with a dual stream router which most are these days.
The dual sim V20 is unfortunately single stream so my max speeds are 90 & 400Mbs instead of being twice as much
I don't understand why you get a difference in speed in the first place. Should not matter plugged or not
I'm using the Vz provided G1100 gateway router. Link speed on the phone says 866 Mbps. I'm at a loss too - probably a phone hardware problem. BTW, I'm still on US99610d deodexed ROM with Xposed and other mods that I wouldn't THINK would cause the problem, but....
PhoneBill said:
I'm using the Vz provided G1100 gateway router. Link speed on the phone says 866 Mbps. I'm at a loss too - probably a phone hardware problem. BTW, I'm still on US99610d deodexed ROM with Xposed and other mods that I wouldn't THINK would cause the problem, but....
Click to expand...
Click to collapse
Bolded bit implies your connection is good. Dual AC which i was expecting.
It's possible LG ramp down speeds to conserve battery. Not an issue with general use only with downloading
Bolded bit? Sorry, but I don't know what bit you are talking about. I remember seeing nothing bolded in anything wifi (settings). My router lists my V20 connection as "802.11ac" and I see nothing indicating any problem. But the phone still has the problem. I'm wondering if there could be an antenna problem and the charger conection acts as an extra antenna? Obviously l'm groping in the dark now.