Quick tutorial for unlocking & relocking the bootloader of the Xperia SP
this is the official way to unlock bootloader
if you want to keep ur DRM keys, first root device and then check this out
Warning!
This procedure will wipe the /data partition of your phone, so you will loose all ur stored data, settings. INTERNAL SDCARD will BE WIPED!!!
For Xperia™ devices released 2013 or later (for example Xperia™ Z and Xperia™ ZL), the SD card of your device will be formatted and you will lose all content (for example photos, music, videos) when you unlock the boot loader.
Click to expand...
Click to collapse
DRM keys WILL be lost forever
schaggo said:
I'd add what losing DRM keys means, e.g. no more Music ID/Gracenote within the Walkman app plus probably most importantly, as asked all the time and all over the place in the T/mint forums: loss of Bravia Engine.
Click to expand...
Click to collapse
older Xperia devices sometimes got issues after unlock of bootloader (BRICK after FOTA update) - you have been warned
why to unlock bootloader?
u can flash custom ROMs/Kernels
u dont need to worry if the new firmware can be rooted or not as with unlocked bootloader u can always ROOT ur device
Sony gives sneak-peaks/preview builds of latest OS which requires unlocked bootloaders, as they did with Xperia 2011/2012 line, so who knows may be Sony may give early builds of next android OS
Most of this is taken from lollylost100's his tutorial from ARC thread (all credits for that concise tutorial go to him, i have elaborated on a few things and added device specific changes)
[ before we begin unlocking bootloader ]
get the IMEI code for ur device: type *#06# in phone dialer to find it out, note only the digits (no dashes)
download the fastboot package
IMPORTANT: if you are using Windows 8 you will need to enable few things to allow driver installation
download the latest FlashTool Xperia Driver Pack and install fastboot drivers (common) & adb drivers for this device from the list!
make sure u have a windows PC with USB cable to connect the phone
power down ur phone and keeping the Volume Up button pressed connect the USB cable to PC this will trigger FASTBOOT mode and windows will start driver installation, which should be automatically done
once drivers are installed just disconnect cable and power on device
[ how to unlock ] (official way)
Go to: http://unlockbootloader.sonymobile.com/ and read everything!
At the bottom click 'Start Unlocking the Bootloader'
First, you should confirm that it is possible to unlock the boot loader of your phone by checking the service menu. In your phone, open the dialler and enter *#*#7378423#*#* to access the service menu.
In your phone, tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
Click to expand...
Click to collapse
after u have verified that u can unlock bootloader, scroll to the bottom of the page and click "Continue"
you will get numerous prompts, read all info and if u agree click on "Accept"/"OK"/"Proceed"
finally u will get a "Create Unlock request" page, enter your IMEI (sometimes the last digit needs to be removed for this to work), name and email address
You should now receive your unique unlock key via EMAIL, SAVE THIS KEY SAFELY
Extract fastboot_with_Android_USB_file.rar and open fastboot folder
Hold SHIFT and right click on the background of the folder
Select 'Open command window here'
Connect your phone in fastboot mode (turn phone off, hold Volume UP button and plug in USB Cable) [make sure drivers are installed as explained above)
In the cmd windows type in fastboot.exe -i 0x0fce getvar version
If a value is returned (it will return 0.5), it means the phone is correctly connected
Type in fastboot.exe -i 0x0fce oem unlock 0xKEY and replace KEY with the key which u received earlier.
You're device should now be bootloader unlocked
If this tutorial is too much for you then itskapil wrote a step-by-step guide (and recorded a video also):
-Instructions: http://www.theandroidsoul.com/how-to-unlock-bootloader-xperia-arc-play-neo-pro/
-Video: http://www.youtube.com/watch?v=LRH3pC7MhEA
(the above videos and some steps are for Xperia 2011 devices, but most the steps are same for Xperia SP)
Relock procedure is posted here
Relocking Bootloader
With the latest release of Flashtool it is now possible to relock bootloader.
Download the latest flashtool from:
http://forum.xda-developers.com/showthread.php?t=2162907
Important
DO NOT USE ANY FTF TO RELOCK BOOTLOADER! THOSE OLD FTFs DO NOT WORK FOR THE 2013 DEVICES!!!
before u relock bootloader u have to be on pure stock kernel (flash only the kernel.sin using flashtool), else the device WILL NOT BOOT after relock
Steps:
now start Flashtool and click on BLU button
u will be asked to connect device in flashmode
once u connect the device u will get a prompt to "Relock"
click on it and when prompted disconnect the device
Mmm my device says that its not allowed for unlock (see the attachment) it means that i cant to unlock my bootloader for ever???theres not another method for to do it??????? what can be the reason for that its not allowed????? Sorry for my bad english and thanks
Sent from my C5303 using xda premium
@SERGI.3210
maybe your question could better fit Q&A section..
Anyway, try to unlock the bootloader despite the unlockinh allowed status
Sometimes you can unlock it even with "unlocking allowed:no"
(Btw if you care about the drm keys, make a backup of the TA partition before proceed)
Sent from my LT26i using xda app-developers app
Txh budy going to try this...
Sent from my C5303 using xda premium
I did the question in the q and a forum but no one answered me ..
please help
firmware: 12.0.A.1.211
C5302
zlebors said:
please help
firmware: 12.0.A.1.211
C5302
Click to expand...
Click to collapse
You must run cmd in directory of fastboot.exe
Sent from my C5302 using xda premium
kuriboo said:
You must run cmd in directory of fastboot.exe
Sent from my C5302 using xda premium
Click to expand...
Click to collapse
I dont have the fastboot.exe file, would you please re-upload coz the link is broken
What do I have to back up before I try this? And how to back those up.
My bootloader is 'no' but I have SIM unlocked it and going to give it a shot as was told by somebody that it could work, cheers.
Sent from my C5303 using xda app-developers app
Ok so I have a strange problem. I got my Xperia SP c5303 today and I'm using Windows 8 x64. I already managed to root the phone on the .257 firmware. When I try to connect the device in fastboot mode (holding volume + and plugging the usb cable to the computer), the LED turns blue and for a brief moment in device manager I can see that there is a device called Sony Fastboot Interface. The problem is, a little notification appears on my computer that the device wasn't recognized even though it appears to be installed correctly in device manager, and after about 5 seconds the phone automatically changes to charge mode.
I tried using Flashtool and when I plugged the phone in fastboot it did recognize it, but just for the 5 seconds that it stays that way. I already disabled driver signature enforcement and installed all Flashboot drivers but the phone just doesn't stay in fastboot mode.
BTW: Bootloader unlock allowed says yes
OsoAlgo said:
Ok so I have a strange problem. I got my Xperia SP c5303 today and I'm using Windows 8 x64. I already managed to root the phone on the .257 firmware. When I try to connect the device in fastboot mode (holding volume + and plugging the usb cable to the computer), the LED turns blue and for a brief moment in device manager I can see that there is a device called Sony Fastboot Interface. The problem is, a little notification appears on my computer that the device wasn't recognized even though it appears to be installed correctly in device manager, and after about 5 seconds the phone automatically changes to charge mode.
I tried using Flashtool and when I plugged the phone in fastboot it did recognize it, but just for the 5 seconds that it stays that way. I already disabled driver signature enforcement and installed all Flashboot drivers but the phone just doesn't stay in fastboot mode.
BTW: Bootloader unlock allowed says yes
Click to expand...
Click to collapse
Try to install drivers with this instruction http://forum.xda-developers.com/showthread.php?t=2170114
Sent from my C5303 using xda app-developers app
alivanov79 said:
Try to install drivers with this instruction http://forum.xda-developers.com/showthread.php?t=2170114
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
I saw that guide and I was going to try it but the phone doesn't stay long enough to be able to do it, once it changes to charging mode then it stops appearing in Device Manager.
I searched online and seems that a lot of people were having this problem with the Xperia line. In most cases it says that it's because drivers are not installed, but I believe I already installed them correctly. Here is how the device appears on my computer but it still automatically changes to charging mode after a couple of seconds.
EDIT: Oh man, someone please erase my posts haha, I actually confused the USB 3.0 and 2.0 in my computer... I connected the phone to a USB 2.0 port and it was detected correctly, I was able to unlock the bootloader.
EDIT2: How do you check if the bootloader is actually unlocked? (Just to be sure)
Do I have to leave my SD inserted when I unlock the bootloader so I won't lose all my data?
pakatsui said:
Do I have to leave my SD inserted when I unlock the bootloader so I won't lose all my data?
Click to expand...
Click to collapse
The external microSD card will not be deleted if you use Flashtool to unlock or relock the bootloader, only the first time you unlock it by the official Sony website. Even with that I think it doesn't wipe the external microSD
But is it safe to remove the external microSD before starting the unlocking process? I remember that I would get a bootloop on my old phone if I didn't have a microSD inserted while flashing stock rom.
DooMLoRD said:
Quick tutorial for unlocking & relocking the bootloader of the Xperia SP
this is the official way to unlock bootloader
if you want to keep ur DRM keys, first root device and then check this out
Warning!
This procedure will wipe the /data partition of your phone, so you will loose all ur stored data, settings. INTERNAL SDCARD will BE WIPED!!!
DRM keys WILL be lost forever
older Xperia devices sometimes got issues after unlock of bootloader (BRICK after FOTA update) - you have been warned
why to unlock bootloader?
u can flash custom ROMs/Kernels
u dont need to worry if the new firmware can be rooted or not as with unlocked bootloader u can always ROOT ur device
Sony gives sneak-peaks/preview builds of latest OS which requires unlocked bootloaders, as they did with Xperia 2011/2012 line, so who knows may be Sony may give early builds of next android OS
Most of this is taken from lollylost100's his tutorial from ARC thread (all credits for that concise tutorial go to him, i have elaborated on a few things and added device specific changes)
[ before we begin unlocking bootloader ]
get the IMEI code for ur device: type *#06# in phone dialer to find it out, note only the digits (no dashes)
download the fastboot package with usb drivers (alternate drivers if the ones in package dont work OR this)
IMPORTANT: if you are using Windows 8 you will need to enable few things to allow driver installation
make sure u have a windows PC with USB cable to connect the phone
power down ur phone and keeping the Volume Up button pressed connect the USB cable to PC this will trigger FASTBOOT mode and windows will start driver installation, extract the above package and point the driver install to that location (usb_driver) folder
once drivers are installed just disconnect cable and power on device
[ how to unlock ] (official way)
Go to: http://unlockbootloader.sonymobile.com/ and read everything!
At the bottom click 'Start Unlocking the Bootloader'
after u have verified that u can unlock bootloader, scroll to the bottom of the page and click "Continue"
you will get numerous prompts, read all info and if u agree click on "Accept"/"OK"/"Proceed"
finally u will get a "Create Unlock request" page, enter your IMEI (sometimes the last digit needs to be removed for this to work), name and email address
You should now receive your unique unlock key via EMAIL, SAVE THIS KEY SAFELY
Extract fastboot_with_Android_USB_file.rar and open fastboot folder
Hold SHIFT and right click on the background of the folder
Select 'Open command window here'
Connect your phone in fastboot mode (turn phone off, hold Volume UP button and plug in USB Cable) [make sure drivers are installed as explained above)
In the cmd windows type in fastboot.exe -i 0x0fce getvar version
If a value is returned (it will return 0.5), it means the phone is correctly connected
Type in fastboot.exe -i 0x0fce oem unlock 0xKEY and replace KEY with the key which u received earlier.
You're device should now be bootloader unlocked
If this tutorial is too much for you then itskapil wrote a step-by-step guide (and recorded a video also):
-Instructions: http://www.theandroidsoul.com/how-to-unlock-bootloader-xperia-arc-play-neo-pro/
-Video: http://www.youtube.com/watch?v=LRH3pC7MhEA
(the above videos and some steps are for Xperia 2011 devices, but most the steps are same for Xperia SP)
Relock procedure is posted here
Click to expand...
Click to collapse
Sir, any mirror link?? I want to download fastboot package to unlock my xsp. Thanks
Sent from my C5302 using XDA Premium 4 mobile app
agileart said:
Sir, any mirror link?? I want to download fastboot package to unlock my xsp. Thanks
Sent from my C5302 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No response? I guess that means no then.
agileart said:
Sir, any mirror link?? I want to download fastboot package to unlock my xsp. Thanks
Sent from my C5302 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
fastboot.rar
My device doesn't stay in fastboot mode for more than 5 seconds :/
Can somebody help?
Hello Everyone!
I currently have a Sprint Variant Samsung Galaxy S7 Edge. I have switched to Tmobile and I am wanting to get this device unlocked in order for me to be able to properly use this phone on another network.
From what I understand, the newer phones use remote unlocking in order to unlock devices and no longer have a code generated using IMEI number.
I have found fairly cheap people who will unlock it on ebay, and with fairly reliable reputation as well.
this is what i have done so far.
1) I have downgraded from the latest version to: G935PVPU2APC5 which i believe is the required version in order to be able to have a device unlocked
2) I factory reset the device
3) I enabled Developer Mode
4) I have enabled USB Debugging
5) I have enabled OEM Unlocking
this is where the issue comes in...
I am unable to use any Dialer Codes in order to access DIAG menus to change stuff around. I need to activate " DM + Modem + ADB " and when i type ##3424# nothing happens. it just calls out.. I was reading online that i have to activate CP Logging in Recovery, but when I boot into recovery the option is not there for me to activate.
I am really wanting to get my device unlocked, and I dont want there to be an issue. does anyone know if that step is necessary or how i can get the dialer menu to work?
elmy2424 said:
i can unlock it for you dont have to enable dm + modem + adb just turn on adb on developer settings, contact me via whatsapp 829-935-8882
Click to expand...
Click to collapse
Are you still unlocking the S7E? What all does it entail?
symbiance said:
Hello Everyone!
I currently have a Sprint Variant Samsung Galaxy S7 Edge. I have switched to Tmobile and I am wanting to get this device unlocked in order for me to be able to properly use this phone on another network.
From what I understand, the newer phones use remote unlocking in order to unlock devices and no longer have a code generated using IMEI number.
I have found fairly cheap people who will unlock it on ebay, and with fairly reliable reputation as well.
this is what i have done so far.
1) I have downgraded from the latest version to: G935PVPU2APC5 which i believe is the required version in order to be able to have a device unlocked
2) I factory reset the device
3) I enabled Developer Mode
4) I have enabled USB Debugging
5) I have enabled OEM Unlocking
this is where the issue comes in...
I am unable to use any Dialer Codes in order to access DIAG menus to change stuff around. I need to activate " DM + Modem + ADB " and when i type ##3424# nothing happens. it just calls out.. I was reading online that i have to activate CP Logging in Recovery, but when I boot into recovery the option is not there for me to activate.
I am really wanting to get my device unlocked, and I dont want there to be an issue. does anyone know if that step is necessary or how i can get the dialer menu to work?
Click to expand...
Click to collapse
Unlocked mines using idoneapps.com. For $35 it can instantly unlock your device, only takes two reboots. You download an app and purchase and click unlock. You can also debrand you phone, read msl and enable hotpsot but that requires rooting.
elmy2424 said:
i can unlock it for you dont have to enable dm + modem + adb just turn on adb on developer settings, contact me via whatsapp 829-935-8882
Click to expand...
Click to collapse
Do you still unlock? I may be interested as I have a Sprint S7 Edge that I want to use on Cricket (sister company to AT&T)
To root your Sony X Performance phone ( I have the F8132 ) You must do this procedure till maybe in the future there is another method.
Unlock bootloader on Xperia X Performance
1) download the ADB-drivers utility here that you will need to install the drivers which enable flashmode to work on your pc. You will also need the Sony Performance X driver so your computer will connect to it properly here
2) Go here to download Android Studio Software which allows you to pen a cmd line and program the phone in flashmode. To save you lots of time and trouble, again, my instructions are much better and help you navigate to the places you need to be so this goes well. Disregard the Sony instructions because you will most likely ask yourself many questions and will not find answers.You will need to properly install the Android studio software to get it working the way you need. Upon install, check off Android SDK and Android Virtual Device. Click next. It takes a while to install. Open the software after it has been installed. It will tell you " No Android SDK found. Click next. Click next again to install the two prechecked updates which are Android SDK Platform and API25" ANdroid 7.1.1 (Nougat). Then click finished to start the install of those 2 updates. It will download files from the internet. This will take a while. Click inish when its done downloading. At the welcome window of Android Studio click on the "configure" button. Choose SDK Manager. There will be 3 tabs at the upper midline of the window. Choose the "SDK Tools" tab. Check off "Google USB Driver and Google Web Driver. Usually these drivers will not work to get your phone in fastboot mode. This is why I have instructed you to install the Flashtool-
drivers utility. Nonetheless, click on these and click on apply. Click accept the click next to download and install this update. Click finish after it has installed then click ok to close the software.
3) On your device, turn on USB debugging and turn on OEM Unlocking by going to Settings, then about phone. Go all the way down to build version and tap on it about 7 times. This will unlock Developer Options menu. To go into Developer Options once it is unlocked goto Settings, then Developer options . This menu is where you must turn on usb debugging and OEM Unlocking to proceed with the procedure.
4) After you have turned on usb debugging, turn your phone off. After its turned off, hold the volume down button while plugging the phone into your pc. Your computer should install drivers that will enable Flashmode.
5)Go here to have Sony give you the unlock code. Input your email address to get the code emailed to you with instructions. It takes just a minute to get the unlock code. DO NOT attempt
to unlock your bootloader with some other method. Odds are its a scam or virus or both and you will be screwed. Follow the steps to get the unlock code by putting in your IMEI
then you are suggested to follow my steps to unlock the bootloader. Keep the Sony page open for reference because once it is closed, you will have to redo the email process and
IMEI process again to get the same code. Youre unlock code never changes.
6) goto the file location C:\Users\PC-User\AppData\Local\Android\sdk\platform-tools where you will open a cmd prompt you must open a cmd prompt in only this folder to make this work. to do so , once in that specific folder
hold down your right mouse button and clock on the shift key then release the mouse button. This will open a pop up window where you can choose to " open command window here"
7) when the cmd window opens, copy and paste this "fastboot devices" directly AFTER the ">" symbol and paste it in the command line with no spaces. It should look lik this.
.........C:\Users\PC-User\AppData\Local\Android\sdk\platform-tools>fastboot devices.........
8)press enter button, your computer should respond in the cmd line with something that looks like this
......CB512A697c fastboot.......
This lets you know that your phone is in the correct mode and ready to be programmed.
9) to unlock your bootloader you then copy and paste directly the cmd code Sony gives you from there website "fastboot -i 0x0fce oem unlock 0XXXXXXXXXXXX" . It will look like this C:\Users\PC-User\AppData\Local\Android\sdk\platform-tools>fastboot -i 0x0fce oem unlock 0xxxxxxxx... The 0xxxx's are YOUR SPECIFIC Unlock code given to you by Sony. DO NOT get this from another other website or software otherwise you will probably be infected with some kind of virus of worse on your phone or computer.
10) press enter to intiate bootloader unlock procedure
11) once bootloader unlock is successful you will see the cmd line spell out this "OKAY [ 1.165s] finished. time: 1.168s" The seconds mean nothing. You do want it to say OKAY!
12) reboot the phone and you will see an annoying warning that cant be undone, which says " your device has been unlocked and cant be trusted" No big deal but very annoying. The phone will work but you will see this everytime you reboot the phone.
13) It takes a while, several minutes, maybe 5, to have the phone bootup. When it does, you will see everything is in a weird language. You need to choose which language you want. to know which menu you must choose, just click on the very first down pointing arrow in the middle of the screen. A menu pops up and you can then choose the language you want. After choosing a language clock ok. Youre done!
Instructions to install TWRP so you can backup and restore your phone here
Thanks for the help, however I get this in the command screen
FAILED (remote: Command not allowed)
I do not get this phone from carrier, and have unlock bootloader allowed = yes , why would this happen to me
edit: everything is fixed now, only problem left is I'm stucked at MM
KWOKSFUNG said:
Thanks for the help, however I get this in the command screen
FAILED (remote: Command not allowed)
I do not get this phone from carrier, and have unlock bootloader allowed = yes , why would this happen to me
edit: everything is fixed now, only problem left is I'm stucked at MM
Click to expand...
Click to collapse
Maybe try Flashtool
ontwerp said:
Maybe try Flashtool
Click to expand...
Click to collapse
I've fixed this problem now
however just flashing the ftf normally wont help
u have to flash the ftf with exclude system.sin
then flash system with system.img
whoever want the system.img can just ask me
KWOKSFUNG said:
I've fixed this problem now
however just flashing the ftf normally wont help
u have to flash the ftf with exclude system.sin
then flash system with system.img
whoever want the system.img can just ask me
Click to expand...
Click to collapse
Can I have your FB/line? Thankss
I don't have X performance yet but I wanna ask a quick question: Will it lose its DRM key and lose camera quality after unlocking bootloader like the older models?
loveyoulovemetn said:
Can I have your FB/line? Thankss
Click to expand...
Click to collapse
PM
dont worry about flashing nougat though, flashing ftf normally will work now on updated flashtool
evildog1 said:
I don't have X performance yet but I wanna ask a quick question: Will it lose its DRM key and lose camera quality after unlocking bootloader like the older models?
Click to expand...
Click to collapse
bump this question as I think the answer is "Yes, it will lose"
huangjs said:
bump this question as I think the answer is "Yes, it will lose"
Click to expand...
Click to collapse
Damn then i'll wait until someone found root exploit.
evildog1 said:
Damn then i'll wait until someone found root exploit.
Click to expand...
Click to collapse
I saw on gfan DRM key can be "regenerated".
However, it's not the one you had before unlocking.
But who cares as long as it will let Sony engine works.
Unlocked bootloader allowed NO!
Is there a Root trick for the Device Lock Bootloader?
I use SOFTBANK series (DOCOMO).
Today I got my rma return device
and I forget to enter the sim unlock code then flashed Google Fi firmware in it
now I cant enter the unlock code and locked with at&t sim card
Any idea? or I just need send back to LG again and let them flash back to at&t firmware?
many thanks
PikachuRX78 said:
Today I got my rma return device
and I forget to enter the sim unlock code then flashed Google Fi firmware in it
now I cant enter the unlock code and locked with at&t sim card
Any idea? or I just need send back to LG again and let them flash back to at&t firmware?
many thanks
Click to expand...
Click to collapse
did you solve this?
PikachuRX78 said:
Today I got my rma return device
and I forget to enter the sim unlock code then flashed Google Fi firmware in it
now I cant enter the unlock code and locked with at&t sim card
Any idea? or I just need send back to LG again and let them flash back to at&t firmware?
many thanks
Click to expand...
Click to collapse
1. flash Mexican locked KDZ.
2. dial: *#546368#*350#
3. enter the code you have
4. flash back the Google Fi KDZ
vavoo said:
1. flash Mexican locked KDZ.
2. dial: *#546368#*350#
3. enter the code you have
4. flash back the Google Fi KDZ
Click to expand...
Click to collapse
I've made the same mistake. I received a repaired device from LG not knowing they sent it back with the AT&T software network locked. I flashed to Google Fi image and now I can't enter my unlock code. This 546368 code gives me a special menu but nowhere to enter an unlock code.
Edit: I followed the steps above but they didn't work exactly for me so here's exactly what I did:
1. Flash to this firmware: V350AWMH10a_06_TCL_MX_OP_0424.kdz firmware from lg-firmwares (sorry I'm too new I'm not allowed to post links)
2. Set up the device just enough to get to a phone dialer prompt
3. Dial 2945#*350# (no need to press "call")
4. Select the first option, "Network lock"
5. Enter your unlock code
That worked perfectly! Thank you for sharing.
fancycat said:
I've made the same mistake. I received a repaired device from LG not knowing they sent it back with the AT&T software network locked. I flashed to Google Fi image and now I can't enter my unlock code. This 546368 code gives me a special menu but nowhere to enter an unlock code.
Edit: I followed the steps above but they didn't work exactly for me so here's exactly what I did:
1. Flash to this firmware: V350AWMH10a_06_TCL_MX_OP_0424.kdz firmware from lg-firmwares (sorry I'm too new I'm not allowed to post links)
2. Set up the device just enough to get to a phone dialer prompt
3. Dial 2945#*350# (no need to press "call")
4. Select the first option, "Network lock"
5. Enter your unlock code
Click to expand...
Click to collapse