I just odined MF4 modem to flash Omega 6.0, afterwards found out my phone became roaming
I tried to flash other MF4 roms which includes or not modem and things didn't change
So I believe MF4 modem is the reason of roaming
Yes roaming itself doesn't do me much bad, I can still have my data network when the data roaming box is checked
But just out of curiostiy to ask why, and is there any mod to remove the roaming icon on the status bar?
Or how can I tweak my phone to believe I am not roaming...
FYI, I am currently in China
Related
I'm new to flashing custom roms and what not. I used odin and flashed everything to the point, csc, modem,pda,pit the rom works awesome but i cannot for the life of me connect to the internet. the 3g icon or h icon wont' show up. in the status it says my network type is gprs and i'm roaming and my mobile network state is disconnected.
I'm with fido, the phone is unlocked i have never had trouble with data or anything until i flashed to a custom rom.
Anyone have the same problem or suggest how to fix?
Data Conn. Issue
Hey mate,
Have you gone into 'Settings', 'Wireless and Networks', 'Mobile Networks' and then 'APN settings' and entered your appropriate settings?
That should fix it if you define the correct access point.
Alex
hey man, yeah i did all that stuff, went in there, found my carrier, put in all the apn settings i can find and still nothing. when i put data roaming on then i get data and the edge icon comes up.
Hey dude,
That sounds strange, flashing custom (or even release) roms is never a guarantee especially with weaknesses in the way that ODIN communicates with your phone, What I would do is Re-Flash your stock rom through ODIN then use the "quick" install method from Darkyy.
I am running 5.6 like you, and I had issues doing it through odin (I kept getting random FC's), additionally, the rom; if installed from CWM will keep your apns and apps e.t.c. along with many settings and configs from the base rom you're using before the flash.
That is the best advice I can give you.
Alex
My config is a follows:
I9000 International
16gb SDHC
500HZ Hardcore Kernel
Darkyy 5.6
Whats the process for reverting back to stock 2.1 eclair rom?
Did you keep a record of your firmware version before reflashing?
If not, you may have to ask someone on here what your base firmware was.
Are you familiar with using ODIN? (The software used for reflashing)
Alex
I am having same issue to...I used 5.4 from Darky and it works well...same with DocRom 4.0 works and the next 5.1/6.0 don't work.
Both Darkys and DocRom are based some JPX....which seem to be root cause..
I've have the same problem. Tried eveything but still didn't work. So went to Samsung Service Centre to have my SGS firmware refresh. I notice after the refreshed same issue of data com missing. Told them and they when into the SGS to select the telco operator setting selection. Now data com. working well. Anyone know the SGS handset setting code? I want to reload to Darky's v5.6 again.
hi folks
i have the same problem... my provider is a virtual provider in the network of our biggest provider here in austria. i was using doc's rom based on xwjpa firmeware and everything worked fine without enabled roaming options.
since doc's rom is based on the newer releases (xxjpx, xxjpy) i' only able to use data connection if i turn on roaming. it also shows me that i'm in a roaming network. i guess the cause are the xx firmwares. xw and xx are european firmwares but i do not know the differences between them. maybe someone has more information about the differences? currently i'm using xwjpa firmware because i don't want to use my phone with enabled roaming options.
hey um i'm having the same problem and thought replying here would be better than starting a new thread.
well i installed the rom without having any idea of what i was doing *stupid idea* so i didn't take note of my original firmware.
i didn't use odin to install the rom just clockwork recovery and the rom and everything installed fine except my data network. i can get signal, call, receive the only problem is i get no data transfer. any help much appreciated. if anything can someone help me step by step to reboot my phone to original?
just for future travellers
Sadly this isn't my own gem, but yeah. hold the power button down, wait for the shutdown menu, above the airplane mode there is a data network button, and it'll most likely say "de-activated" if nothing else has worked. Its ok to feel like a chump, I did after rehashing the hell out of this phone for a few days ( the wifes phone, my phone does exactly what its told. )
Anyway, yeah, this will probably be the reason for the lack of the icon "G", "3G" or "H" where it should be.
Dave.
Hi all,
I can't get LTE data to work on the latest CM 10.2 nightly (cm-10.2-20131007-NIGHTLY-jfltexx). It establishes a connection to the LTE service according to the device status menu, but when I go to browse the internet, it says no data connection (there is also no valid ip address in the device status menu).
Am I doing something wrong? Or do I need to reset my carrier settings or something? I am with Vodafone AU. I have also done a full data wipe, and I have flashed both the MGA LTE modem and the regular MGA baseband modem.
Thanks
OK solved my problem. The APN settings were wrong, changed it to match the touchwiz settings and it has worked.
Recently flashed Wicked v. 9.1 onto the stock slot using safestrap recovery, so far the rom has been working fine, and I've set up the apn. When looking at device info it shows I am connected to AT&T and LTE, but my mobile network state is disconnected. Any solutions for this?
DVezor said:
Recently flashed Wicked v. 9.1 onto the stock slot using safestrap recovery, so far the rom has been working fine, and I've set up the apn. When looking at device info it shows I am connected to AT&T and LTE, but my mobile network state is disconnected. Any solutions for this?
Click to expand...
Click to collapse
Check to see if you still have the same modem as you started with.... I flashed a rom, I had connection but would cut out now and again... ended up relashing the same modem that was on the phone before... (modem did not change) now I have data and solid connection for phone calls.
Gage_Hero said:
Check to see if you still have the same modem as you started with.... I flashed a rom, I had connection but would cut out now and again... ended up relashing the same modem that was on the phone before... (modem did not change) now I have data and solid connection for phone calls.
Click to expand...
Click to collapse
Not sure which modem I had before however I flashed from mk2 and just flashed the new modem and still no change
DVezor said:
Not sure which modem I had before however I flashed from mk2 and just flashed the new modem and still no change
Click to expand...
Click to collapse
You sure mobile data is checked on in the settings? And did you flash the MK2 modules?
Google the kind of phone you have and ATT is your provider I take it? Include which version of android also so something like..... i337 modem att android 4.3 of course swtich the proper name and provider that you have. You don't want to be flashing the wrong modem you could end up with a paper weight....
Background:
- Sprint L720
- International unlocked with GSM SIM
After updating to a new 4.4 ROM (Slimkat) and NAE (modem only from the modem thread), connecting to anything other than EDGE causes, what seems to be, a modem crash. If I force "GSM only"/2G connection, it's stable with EDGE. If I try to connect to 3G, I see "3G" quickly flash on the status bar next to the signal indicator (I have full service), and then the whole mobile connecting drops and resets... then it goes back to having full service, but no data connection at all - until I got to mobile settings and set it back to "2G" and it goes back to stable EDGE.
I am overseas with the phone (it's fully unlocked and I got a strong H+ connection with the old CM ROMs at the same location), so I am wondering if it's an issue with the new 4.4 ROMs not supporting GSM? Perhaps some sort of baseband/modem mismatch? I also flashed NAE (modem only) as well when I did the ROM - I have since downgraded, but perhaps it isn't fully downgrading?
I applied the MF9 full one-click, no joy ... I did a factory wipe and applied the 4.2 factory image from SamMobile, no joy...
Looking at the logcat, I see something along the lines of an error for 'Mobile network type unknown: 0'...
Any help would be greatly appreciated - only having EDGE is driving me nuts, especially when my actual mobile network here is very fast..
Let me know of any information I need to provide - Thanks
Ok, update - I applied the MK2 modem and then NAE, as I saw someone else do because they said that the NAE file is missing some things... no joy
This all seems to have happened after applying the NAE modem-only file - Does SlimKat not support GSM? I don't think it's SlimKat, because, even going back to the fresh "Factory default" flash that I got some SamMobile, I still had the same issue..
Which leads me to what I think the problem is - the Qualcomm settings. Those seem to be persistent across all ROM restores, so how do I go about resetting the QUALCOMM settings to default? Is there something I can do with EFS Professional/CDMA Toolbox or something?
I have been running Nightlies of CM11 everyday as they are released and normally I have no problems. One of them must have tripped something. Wherever "Sprint" is supposed to be--bottom of notification panel and under the signal in the quick setting panel--it says "Roaming Indicator Off." I normally wouldn't mind but with it is the inability to send MMS or connect to LTE.
I've flashed various APN zips to try to fix it that way to no avail. I've tried manually entering the apns and still nothing. I set the phone back to stock using ODIN and LTE and data worked fine. I rooted it again and install the pre unified build of JFLTESPR and data and lte worked, then when i wiped and installed M8 again came the roaming indicator off. I'm not sure what the issue is, but I really would like to get the kinks worked out so I can have LTE again.
It a problem with the ROM that has to be fixed by the developer.
Problem is fixed, it had to do with the the rom not asking for the pin to my sim card. I flashed an older build and used it to remove the need for the sim pin and then reflashed to the most current build.