Related
Hi there,
I've had my HD2 for 2 weeks now and its been working perfectly. I decided to hard reset my phone and start again from scratch. However, now when I connect it to my PC it doesn't connect or recognise it at all, it charges though. I also tried it on my laptop, thinking it might be my PC but its just the same. This is really frustrating and any help would be greatly appreciated.
Goto "Start/Menu/All Settings/Connections/USB to PC" and ensure ActiveSync button is green.
If you are running Vista or Win7 you have to install Windows Mobile Device Center. http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
If not the normal Active Sync will not see the phone.
Hey guys. I know this a old thread. I notice ever since I used the program here to change the radio on my htc hd2 that my computer no longer detects my phone with snyc cable even if I have Windows Mobile Center 6.1 installed an such. The programs pop up though when I look on device manager there no unknown devices or anything. In fact I don't even hear a sound of any sort that a usb device was plug into my pc same thing on my laptop. I even put back original tmobile rom on my htc hd2 no resolve. When I fflash it with Leoimg.tbh or how ever you spell it I put it in my sd card. Any ideas on how to get the old phone to work on windows 10 again? or is something mess up in the coding on official rom or on how I flash it back to stock?. I wish I had a old pc with windows vista to see if it just windows 10 or what. Just seems so odd
no reaction from phone nor pc
Hi, guys i have similar problem, but it has nothing to do with Active Sync. The device won't notice that it is connected to the pc (it won't ask (this option is ticket) if it should act as card reader, modem or Active Sync) so as pc won't show new device. Strangely, while the device is connected into an outlet charger via cable including data wires and "don't charge if connected to a pc" option is ticket in hd2, it acts as it is connected to a pc and won't charge. When it is connected to a charger with unseparable cable (which i suppose hasn't have data wires) it starts carkit menu. For me it seems like something is shorted but i'd like to hear some other suggestions before i try to disassemble it and look inside.
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Same thing here.
It charges through USB but it doesnt connect.
If i choose the storage option it works fine.
I want to sync my outlook and i cant...
What the heck...?
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Come on... give something drastic!
Already done that, rebooted the pc and the hd2...
still nothing
djchubbs said:
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Click to expand...
Click to collapse
believe it or not i have done that mannyy times and did alot of device manager things to try and let both computers recognize the hd2 but still nothing haha..
ive had previous hd2's and they've all connected fine untill this one, maybe its this specific one thats giving me trouble. but regardless, it charges via usb then it should be able to recognize it
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
johncmolyneux said:
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
Click to expand...
Click to collapse
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
k20a1 said:
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
Click to expand...
Click to collapse
That is very weird. Sorry mate - never heard of it doing that for anyone before.
Make sure you have the mobility center/active sync program installed on your computer. Without it it won't work.
On Vista or Seven, with the HD2 plugged in, you can find the program/drivers by launching and refreshing manually Windows Update. On XP you have to do that manually.
Good luck.
This happens to me often. In my case I have found it to be a weird driver issue. Go to device manager and look for the yellow triangle. Right click and update driver software. This worked for me I hope it helps.
bit late but just flashed maxsence and i love the look, but have allready had to restart by phone 10 times in 10 minutes. I'll wait for the next release. back to GTX for now.
Good work NRG. keep it up.
this is one of the many WM6.5 errors!
need Android soon!
Ok here we go.
The phone did not connect through activesync to my pc. When i selected to connect as mass storage it connected.
I checked for driver issues in device manager but nothing came up.
I checked the hd2's activesync. Bingo! the activesync was crashing when i was running it. I had to hard reset the phone.
Now it works fine.
My guess is that maybe a program that i installed recently was buggy and created this particular problem. Unfortunately i have about 50+ programs installed (including themes etc) and i m not sure which one it was.
I was installing all the programs again today one by one and after the install process was completed i connected the hd2 to usb to find which app was the problematic one.
After installing almost(some were found useless) all of the apps (here is the crazy part) the hd2 still was connecting through activesync....
HTC will drive me nuts...
Anyway the phone now connects correctly.
I cant understand which was the problem....
as odd as it may sound i think i figured it out.
i think its the usb cable that im using, i have to wiggle it around for it to connect to active sync but once it connects its not a stable connection as it cuts in and out.
but charging capabilities work though!
pos wire, i ordered a new wire and if that one fails also, i will have to get my hd2 replaced for faulty usb port
thanks for all the replies much appreciated
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
angelossssss said:
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
Click to expand...
Click to collapse
i did whenever i custom rom'd it, it still does the same thing. yes it will connect via usb while in bootloader but will not during regular phone operations lol
"Disk drive" mode not working with XP laptop
HD2 is working fine with my desktop, but wit laptop I can only use ActiveSync to browse files.
When I connect the USB cable I get:
"Found new hardware wizard"
but it tells me that it Cannot Install This Harware - Disk Drive
"An error occurred during the installation of the devie The system cannot find the file specified"
And I only have "Finish" to click - if I click it the wizard lunces again immediately and goes on and on with no end.
HD"/Leo does not appare in Disk Manager (I know ablut the drive lettering issue)
I'm sure its my XP issue, but I havent found drivers to fix that, and I'm not about to reinstall XP on my lappy in near future.
Transfer files - Solved
;
k20a1 said:
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Click to expand...
Click to collapse
I share the same here and I was despaired of trying to solve it with any logical, as well with illogical, measures. Such as: rebooting, changing usb cables, reinstalling activesync 4.5, etc.....etc...blla..blla...blla...
However, I solved the "Transfer files issue" by taking out the sd card from the HD2 and connect it with an external cards reader to my pc.
The card reader connected and works with the same usb cable that does not work with the HD2.
That way I load it with all files and in the same occasion I reload into my computer the daily spb backup files.
However, I have the feeling that the reason for that problem is a missing file/driver named: "Setup1.SPL" in the pc windows operating system.
In order to solve that it seems that only reinstalling windows on my pc will be the solution which defiantly do not like.
This is a new problem for me.
After successfully sorting out all the troubles of connecting SGS to KIES, and been using it happily for almost a month, now I'm facing another trouble which is quite big this time.
Windows Vista (32-bit) and Windows 7 (64-bit) are now can't recognize the phone when connected through the USB. Got a message says the USB Device/Hardware Is Not Recognized.
I'm using the SGS original cable. The cable was working perfectly and now suddenly it doesn't work in data mode but still able to recharge the phone battery.
Am I having a cable problem? Or worst, the USB connector (on the phone) problem? I tried to clean the USB connector on the phone but still can't connect the phone to my computers.
Does anybody here having the same problem as well?
I just gave up with my PC, same problem
In then end I set up a VMware XP machine to sync
Else I use my laptop
Sent from my GT-I9000M using XDA App
I sometimes have a problem with KIES detecting my phone. What I sometimes have to do is connect the phone with KIES loaded, go to device manager, show hidden devices then uninstall the phone (sometimes has error on device, sometimes not) then disconnect then reconnect phone.
Such a faff but using KIES to check for firmware update lol
This may not help ya but worth a thought, Im on Win7 64
I did not have any problem connecting the phone to KIES, I was able to upgrade the firmware from JF4 to JG4, and been a happy SGS owner for a month now.
But yesterday I suddenly can't connect the phone to any computers. My laptop (Win Vista 32-bit) said that a USB device connected is not recognized. I reinstall Kies in my laptop and same thing happen. Then I switch to my PC (Win7 64-bit), USB device not recognized also appear. Reinstall Kies, still no luck.
What I just realized is that there is NO USB Indicator in the SGS notification bar!
Does that mean that the USB connector on the phone going bad?
I still able to recharge the battery but the USB icon dont show up.
I am now seriously considering the quality of Samsung Galaxy S! Way too much problems for average owner, and even for savvy owners this is just over the top!
What should I do now?
Find another computer or install VMWear and see once and for all if its your phone at fault. Also worst case do a factory reset. If no go then you might have a hardware problem. You could always try Mass Storage mode and see if you can mount the phone as external drive. Its not really the phones fault but I would say its KIES, its just a piece of ****. I have never been able to connect to it using 3 computers and I would say I know what i'm doing since I work in i.t. Also did you replace your Launcher recently? As KIES needs TouchWhiz as default launcher to work
I just tried to connect SGS to another laptop (Win XP 32-bit SP3, no KIES though). Same thing, the USB device is not recognized baloon show up and no USB indicator in the SGS status bar.
I'm going to Samsung Service Center, after calling them, they suggest me to bring the phone to the nearest Samsung Center. They said that this is not the first time and also said that the problem might be the connector or the cable.
have you read this ? http://forum.xda-developers.com/showpost.php?p=8107646&postcount=50
Seems kies has a bug where it can't work with files with 16chrs or more.. Told ya KIES is a piece of ****
Yes, But did you try the Mass storage mode
Settings/About/USB
I always just use Mass Storage mode to xfer files. KIES is crap.
As I said previously, my SGS has no problem at all connecting to Kies. USB Mass storage is working perfectly as well.
The problem I'm having now is the hardware (the cable or the interface) I guess, since I still can recharge the phone using the charger or the USB cable.
ps. I'm using Kies from Australia, the 1.5.1.10083.
Have you looked at the pins on the phone? are they screwed? Can you somehow find or burrow another Mini-Usb cable to test ? I have heaps as some of my external hdd's use mini-usb but you might have to buy a new cable.
Try this.. I wrote this a while back.. It may help. I know you suspect it's hardware, but it might be worth trying anyway.
http://www.blog.gleff.com/2010/07/fix-for-kies-not-connecting-to-galaxy-s/
ickyboo said:
Have you looked at the pins on the phone? are they screwed? Can you somehow find or burrow another Mini-Usb cable to test ? I have heaps as some of my external hdd's use mini-usb but you might have to buy a new cable.
Click to expand...
Click to collapse
gleff1 said:
Try this.. I wrote this a while back.. It may help. I know you suspect it's hardware, but it might be worth trying anyway.
http://www.blog.gleff.com/2010/07/fix-for-kies-not-connecting-to-galaxy-s/
Click to expand...
Click to collapse
Thanks for the help guys!
It's purely hardware problem. Yesterday I brought it to local Samsung Service Center, and because they said this is not the first timer, the technician quickly open the device and gosh... dust and some fungus were collected near the microUSB port! I admit I never close the USB port, just left it open after use, my bad!
After some cleaning and testing, the microUSB is working again.
Now I'm a happy SGS user again!
but that doesn't explain how it works on one Windows (Win7) but not on another Windows (WinXP)
AllGamer said:
but that doesn't explain how it works on one Windows (Win7) but not on another Windows (WinXP)
Click to expand...
Click to collapse
The SGS wasn't recognized in ALL Windows versions, since it was a hardware problem.
Now SGS is recognized in ALL Windows versions.
download "usbdeview" and delete the usb drivers for the specific device.
I am trying to install the Samsung Intercept (Virgin Mobile) on my Windows 7 netbook. I could never connect the device before to either WinXP or Win7. I recently factory reset my phone and after installing the drivers on WinXP, the phone showed that it was connected. I mounted the SD card to the computer and it never showed the drive. I unmounted and disconnected and since then it never connected. I keep getting that it's not recognized.
On my Win7 computer, I installed the drivers (had to force Windows to find the driver). Now the computer senses that it's connected, but it says "the device cannot be started". So I'm thinking that my P.O.S. phone can't figure out wtf USB mode is. It showed it once and that's it.
I've tried probably 3 or 4 different drivers and now I can't figure out how to just start clean. I don't even think I need to because the computer driver installed fine (It says Samsung USB Android whatever when it's connected). I tried with USB debugging on and off.
I even tried to make a virtual Windows XP to try it on a fresh install, but VM won't take unknown USB devices.
I uninstalled all my drivers, even the USB hub drivers, rebooted after the uninstall. No luck.
Before I reinstalled the hub I tried to force XP to the drivers (different ones not the same driver over and over) and now its saying "the file does not contain any information about this device". WTF?!
I'm so confused with this stupid driver that I can't take it anymore. I'm now considering reformatting my computer, but it's not worth it just to root a phone. I'd rather put up with my phone needing a battery pull at least once a day than to lose all my files.
caderyn19 said:
I am trying to install the Samsung Intercept (Virgin Mobile) on my Windows 7 netbook. I could never connect the device before to either WinXP or Win7. I recently factory reset my phone and after installing the drivers on WinXP, the phone showed that it was connected. I mounted the SD card to the computer and it never showed the drive. I unmounted and disconnected and since then it never connected. I keep getting that it's not recognized.
On my Win7 computer, I installed the drivers (had to force Windows to find the driver). Now the computer senses that it's connected, but it says "the device cannot be started". So I'm thinking that my P.O.S. phone can't figure out wtf USB mode is. It showed it once and that's it.
I've tried probably 3 or 4 different drivers and now I can't figure out how to just start clean. I don't even think I need to because the computer driver installed fine (It says Samsung USB Android whatever when it's connected). I tried with USB debugging on and off.
Click to expand...
Click to collapse
I had the same issue too.
Have you tried using another USB cable? If you're using the cable that came with the phone it wont work (well sometimes). What you can do is find or buy another Micro USB cable for your intercept. You can buy one off amazon for less than $10. I brought mine from Best buy for $20. It works fantastically.
scream4cheese said:
I had the same issue too.
Have you tried using another USB cable? If you're using the cable that came with the phone it wont work (well sometimes). What you can do is find or buy another Micro USB cable for your intercept. You can buy one off amazon for less than $10. I brought mine from Best buy for $20. It works fantastic.
Click to expand...
Click to collapse
I was seriously considering another cable because I read in some other threads pretty much what you just told me, but I guess I was one of those "on the twelth time it finally connects" type of situations. I connected it last night and it worked. Just need to update my SDK stuff, make sure I have all my info for SuperOneClick, and cross my fingers lol!
Thank you for your advice. If it stops working I'm gettilng a new cable.
[EDIT] and it stopped working... I knew I should've just rooted when I had it connected, but I wanted to back my stuff up. Looks like I'm getting a new cable lol.
Sent from my SPH-M910 using Tapatalk
[EDIT] You were totally right! It's the cable. I got a Belkin for $15 at Target. I plugged it in and immediately Windows 7 Pro 32-bit detected the drivers, the handset, and installed it. Now time for rooting
I know it's been a couple of months, but I'm curious if you've had any other problems with connecting?
I was having the same problem and I had a few cables that I tried with no luck. I also tried my wife's Blackberry cable, which is a thicker cable that claims to be a "DATA" cable...no go.
I probably will just go buy the Belkin one you referred to if you've had no other problems.
Thanks!
-- Sent from my Galaxy Tab using Tapatalk
GreyCelt said:
I know it's been a couple of months, but I'm curious if you've had any other problems with connecting?
I was having the same problem and I had a few cables that I tried with no luck. I also tried my wife's Blackberry cable, which is a thicker cable that claims to be a "DATA" cable...no go.
I probably will just go buy the Belkin one you referred to if you've had no other problems.
Thanks!
-- Sent from my Galaxy Tab using Tapatalk
Click to expand...
Click to collapse
I actually have had no problems (on my Win7 PC) since the install. As for my XP computer, I just gave up on trying to get it to work. Try completely uninstalling every instance of the Samsung programs (I went through my registry *dangerous*) and all things Android and reboot to a fresh power cycle (like with the phone) so Windows can update all its important files reguarding the driver removal. Then install and THEN plugin.
It literally randomly worked for me. I had the drivers installed properly, but the charging cord gave me "bad driver install". I didn't change a thing and plugged in wth the Belkin and was good to go.
Hope you can get it working! I know the anticipation of phone modding, and I love it! Lol!
Sent from my SPH-M910 using Tapatalk
Ditto, ditto and ditto! I have the same thing with my intercept, except I started on win7/64, could not get anything going. Then created an XP VM - over my dead body - no go.
Using the same cable, if I plug in my Captivate, everything comes up.
For you guys, when you bought a different cable, what did you buy? micro-to-micro USB? Or something else?
J
I usually use the cables that came with my HTC phones. Also I have better luck if I reboot the phone prior to connecting it to the PC.
I can't connect my phone to laptop it always shows it as unknown device .I have uninstalled it couple of in device manager and plugged it still same even its in USB debugging enabled .keep rebooting my laptop and keep trying still the same
Turn my off plug it to laptop them turn on still Its window 7. Tell me what to do ????? I think! It was rooted then I got OTA update (I was new I didn't know that I shouldn't install that I was happy to install on my rooted phone ) that's from where problem started I think.now I want to root my phone but it's not connecting .HELPPP
binsalamat said:
I can't connect my phone to laptop it always shows it as unknown device .I have uninstalled it couple of in device manager and plugged it still same even its in USB debugging enabled .keep rebooting my laptop and keep trying still the same
Turn my off plug it to laptop them turn on still Its window 7. Tell me what to do ????? I think! It was rooted then I got OTA update (I was new I didn't know that I shouldn't install that I was happy to install on my rooted phone ) that's from where problem started I think.now I want to root my phone but it's not connecting .HELPPP
Click to expand...
Click to collapse
Try reinstalling the drivers and/or use a different usb cable or different jack.
Believe me I have done all that different cable and PC reset my phone reset my PC .just because I have rooted my phone I can't send it for replacement and I can't unroot it without connect to PC and that is the problem .I'm here because this is my last hope .
Sent from my Nexus 4 using xda app-developers app
any updates on this?
i'm having the same problem. my n4 is not recognized - i've tried three different computers and i can't even get it to show up so i can move files in/out of the phone.
i bought this n4 used from kijiji. i just want to get it back to complete stock form with locked bootloader.
i've tried three different machines all windows 7 x64 - might try an xp machine but i think it's the phone
factory reset the phone
tried with and without usb debugging
tried 4 different cables
phone has unlocked bootloader
cannot get into recovery, i get an triangle with robot lying down
phone shows up as unrecognized usb device
binsalamat said:
Believe me I have done all that different cable and PC reset my phone reset my PC .just because I have rooted my phone I can't send it for replacement and I can't unroot it without connect to PC and that is the problem .I'm here because this is my last hope .
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
If you have an unlocked bootloader use this tool to lock it: https://play.google.com/store/apps/details?id=net.segv11.bootunlocker
To unroot use the permanent unroot feature in SuperSU.
Order is important since the Bootloader tool requires root.
Sent from my Nexus 4 using xda app-developers app
binsalamat said:
I can't connect my phone to laptop it always shows it as unknown device .I have uninstalled it couple of in device manager and plugged it still same even its in USB debugging enabled .keep rebooting my laptop and keep trying still the same
Turn my off plug it to laptop them turn on still Its window 7. Tell me what to do ????? I think! It was rooted then I got OTA update (I was new I didn't know that I shouldn't install that I was happy to install on my rooted phone ) that's from where problem started I think.now I want to root my phone but it's not connecting .HELPPP
Click to expand...
Click to collapse
SeraldoBabalu said:
any updates on this?
i'm having the same problem. my n4 is not recognized - i've tried three different computers and i can't even get it to show up so i can move files in/out of the phone.
i bought this n4 used from kijiji. i just want to get it back to complete stock form with locked bootloader.
i've tried three different machines all windows 7 x64 - might try an xp machine but i think it's the phone
factory reset the phone
tried with and without usb debugging
tried 4 different cables
phone has unlocked bootloader
cannot get into recovery, i get an triangle with robot lying down
phone shows up as unrecognized usb device
Click to expand...
Click to collapse
Try following these directions to properly install the Google drivers.
http://forum.xda-developers.com/showthread.php?t=1830108
Thanks for your response!
Do still have that problem ?
How did slove it?
Sent from my Nexus 4 using xda app-developers app
thanks. i installed the android sdk and java jdk but still have the problem. i believe the problem is with the phone 100%
my nexus always shows that it's charging on AC whenever plugged in. doesn't matter if it even is to AC or USB. the phone shows up as unrecognized device with a bang in the USB section of the device manager. on some computers it doesn't even show up.
i tried on my macbook pro and it doesn't even show up there but in every case, the phone charges.
wondering if there's a switch or toggle somewhere that will turn it on and get it working
i'm going to install a windows xp VM as a last ditch resort and see if it at least shows up there.
SeraldoBabalu said:
thanks. i installed the android sdk and java jdk but still have the problem. i believe the problem is with the phone 100%
my nexus always shows that it's charging on AC whenever plugged in. doesn't matter if it even is to AC or USB. the phone shows up as unrecognized device with a bang in the USB section of the device manager. on some computers it doesn't even show up.
i tried on my macbook pro and it doesn't even show up there but in every case, the phone charges.
wondering if there's a switch or toggle somewhere that will turn it on and get it working
i'm going to install a windows xp VM as a last ditch resort and see if it at least shows up there.
Click to expand...
Click to collapse
Make sure your device is on MTP and try an other data cable which has no missing/broken data wires inside.
Sent from my Nexus 4 using xda app-developers app
yep it tried on mtp and ptp with 4 different cables. two original nexus 4 cables, one nexus 7 cable and a blackberry cable. they all work with my other nexus 4... just not this one.
the windows VM didn't work unfortunately.
SeraldoBabalu said:
yep it tried on mtp and ptp with 4 different cables. two original nexus 4 cables, one nexus 7 cable and a blackberry cable. they all work with my other nexus 4... just not this one.
the windows VM didn't work unfortunately.
Click to expand...
Click to collapse
That is strange, it should work with the Windows Virtual Machine.
Maybe it is to do with the standalone machine using it in the same time.
Sent from my Nexus 4 using xda app-developers app
Same problem here. USB is not recognized using my Nexus 4 ( it used to be recognized on two PCs, but no longer), but another Nexus 4 connects perfectly. I can only charge a USB rate on chargers that used to charge at ac rate. I've tried everything, and more than mentioned in this thread.
LG-E960, Tapatalk b4
I've ordered a replacement USB port via Amazon for $23. Once I install it, I'll update this thread.
LG-E960, Tapatalk b4
Hi guys,
Seems that I've got the same trouble. Got my N4 (stock ROM, 4.2.2) a couple of weeks ago and everything was ok - connection as MTP, connection for debug and so on. But yesterday I connected it to my PC and found that the device indicates charging but not USB connexion. So I've tried to reboot PC and N4, tried other cables and 2 other PCs (my with Win8, and those with Win7 and Linux Mint if matters). Other devices are ok (Huawei Honor, N7, Milestone2).
The phone just doesn't detect USB connection - in both MTP and PTP. Then I tried to plug in wall charger and connect back again to USB. AND IT WORKED! The phone detected the connection so I was able to mount it and detect with adb. I thought that the problem was solved but when I connected it next time - same ****. This time nothing helps (most likely that there wasn't any casual relationship between wall charger connection and temporary fix...)
What options I've got now? Try to root the device and look into syslog to detect if it's a software issue or disassemble the device and try to find any defects on USB port?
Thank you,
Alex
allookin said:
Hi guys,
Seems that I've got the same trouble. Got my N4 (stock ROM, 4.2.2) a couple of weeks ago and everything was ok - connection as MTP, connection for debug and so on. But yesterday I connected it to my PC and found that the device indicates charging but not USB connexion. So I've tried to reboot PC and N4, tried other cables and 2 other PCs (my with Win8, and those with Win7 and Linux Mint if matters). Other devices are ok (Huawei Honor, N7, Milestone2).
The phone just doesn't detect USB connection - in both MTP and PTP. Then I tried to plug in wall charger and connect back again to USB. AND IT WORKED! The phone detected the connection so I was able to mount it and detect with adb. I thought that the problem was solved but when I connected it next time - same ****. This time nothing helps (most likely that there wasn't any casual relationship between wall charger connection and temporary fix...)
What options I've got now? Try to root the device and look into syslog to detect if it's a software issue or disassemble the device and try to find any defects on USB port?
Thank you,
Alex
Click to expand...
Click to collapse
I got mine to work by using a 2 into 1 usb plug. The kind that comes with portable CD writers. Once I got it working I reflashed stock 422 and the problem is gone. Turns out it was a bad flash from the previous owner.
Sent from my Nexus 4 using Tapatalk 2
SeraldoBabalu said:
I got mine to work by using a 2 into 1 usb plug. The kind that comes with portable CD writers. Once I got it working I reflashed stock 422 and the problem is gone. Turns out it was a bad flash from the previous owner.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for advice. During this day it worked properly twice - the phone just started detecting connection. No obvious reasons for that... I got a new device with stock 422 from amazon and haven't flashed or event rooted it. How do you think, should I try to flash it with official 4.2.2? Now I can say that it's most likely a software issue.
allookin said:
Thanks for advice. During this day it worked properly twice - the phone just started detecting connection. No obvious reasons for that... I got a new device with stock 422 from amazon and haven't flashed or event rooted it. How do you think, should I try to flash it with official 4.2.2? Now I can say that it's most likely a software issue.
Click to expand...
Click to collapse
I'd say try a factory reset first and see how that works.
Sent from my Nexus 4 using Tapatalk 2
SeraldoBabalu said:
I'd say try a factory reset first and see how that works.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Tried it out - the result is the same. Now I can not even unlock the bootloader to reflash 422... Btw I didn't managed to find a 2into1 cable but checked if the same trick would work with USB hub with external power - it works really better. The device can detect the connection almost all the times and I can see it listed in adb devices and as a mounted storage. Though in fastboot mode this doesn't help. Device remains unrecognized.
allookin said:
Tried it out - the result is the same. Now I can not even unlock the bootloader to reflash 422... Btw I didn't managed to find a 2into1 cable but checked if the same trick would work with USB hub with external power - it works really better. The device can detect the connection almost all the times and I can see it listed in adb devices and as a mounted storage. Though in fastboot mode this doesn't help. Device remains unrecognized.
Click to expand...
Click to collapse
well if you're getting a connection to the computer but not in fastboot, your drivers might just need removal/reinstallation.
once you get it going, reflash the stock 4.2.2 from google and see how it goes.
if that doesn't work and you can get it going, get it replaced by Google.
if you can, try it on a mac.. they don't need the drivers installed. just run it all from terminal.
Okay, I've managed to track down the issue...
Once I got it available for fastboot I've unlocked bootloader and then flashed with Cyanogen. The problem remained but I could get dmesg output for plug-in event. I've managed to get logs for problematic case (doesn't detect USB data connexion) and for correct behavior case (when Android detects USB data connection).
No sense to put the whole log pieces here just a brief quotes.
For correct case:
Code:
Avail curr from USB = 500
For incorrect case:
Code:
Avail curr from USB = 1500
USB module firmware tells the system that it has detected data-connection and enabled low-power mode (500mA). In this case Android initiates mtp and adb:
Code:
<6>[62539.001178] adb_open
<6>[62539.001269] mtp_bind_config
<6>[62539.001422] adb_bind_config
And in problematic case USB module firmware incorrectly indicates for the OS that there are only power-connection (5V/ground). I cant say exactly where the issue is but there are only two options - bug in USB module firmware or physical fault of connection (pins, bus or whatever else). Anyway I've to replace USB module or just go with it and use adb over network (the matter is that sending the device back to Amazon seller from my country would cost me 1/3 of the purchase total so I consider that just unreasonable).
Thanks to LG - for my money I got not only a box with device but also whole lotta fun =)