Related
Does anyone know how to change the carrier names in these three places?
Eri.XML file
Where is that in kitkat?
daniel4653 said:
Eri.XML file
Click to expand...
Click to collapse
Never mind I found it here is my eri.xml file where do I change it at?
Eri.Xml is a good way when I had s3 but after i upgraded to s4 it doesn't work for me.
anees02 said:
Eri.Xml is a good way when I had s3 but after i upgraded to s4 it doesn't work for me.
Click to expand...
Click to collapse
Right I have an S4 running 4.4.2 and there is no eri.xml in /data and when I copied one that I downloaded It didn't change anything.
Questions and Help issues belong in Q&A and Help sections...thanks!
Thread moved
FNSM
I have the exact same issue. It says Samsung everywhere it should say sprint. I can't even complete the hands free activation. But data and voice is working. I no longer have sprint zone either. I checked the carrier name in a signal app and it said chameleon. How can I change this. Maybe then I can connect to sprint network so this error will stop bugging me. Thanks.
Another thought, has anyone ever deleted the build prop. and did a software load with Odin. Maybe that will rewrite the correct items back into the phone and sprint may reappear. I don't know. Just a thought. I tried load full NC6 from sammobile today but that didn't fix it.
Hello I recently purchased a sm-n900v galaxy note 3 and updated to 4.4.2 and rooted with towelroot and unfortunately made the mistake of deleting samsung apps by mistake and I was wondering what my options are as to how to be able to get the samsung apps back. If anyone can be of some help it would be greatly appreciated.
NoobHTCEVOShiftGuy said:
Hello I recently purchased a sm-n900v galaxy note 3 and updated to 4.4.2 and rooted with towelroot and unfortunately made the mistake of deleting samsung apps by mistake and I was wondering what my options are as to how to be able to get the samsung apps back. If anyone can be of some help it would be greatly appreciated.
Click to expand...
Click to collapse
You can ask someone to extract APK file and send to you to install on your phone.
Or just reflash the firmware.
Where is the best place to ask for someone to extract the apk
Flash the ROM again. Or use Google. You could have done both several times in the time since you posted instead of waiting to be spoon-fed.
I needed the Samsung apps apk once and I found it after 30 seconds. So can you.
NoobHTCEVOShiftGuy said:
Where is the best place to ask for someone to extract the apk
Click to expand...
Click to collapse
There is a specific forum for N900V, you can ask there.
Sent from my Nexus 7 using Tapatalk
I was lucky enough to find a galaxy apps from samsung I appreciate everyones help
Good Morning fellas,
I have been searching for about a week and I can usually fix my own issues with the help of the forums. But this one has me stumped. I have the Verizon S5, Had it rooted and then lost root. Got an OTA of Lollipop installed with no problem but of course couldnt root. I just got my phone back to NCG last night but the Major problem is I do not have any data without being on wifi. In the APN is only the verizon apn and its greyed out. Also can not add another apn. Straight talk runs on ATT APN info (TF DATA) I was wondering if it would be possible if i downloaded an ATT rom that added the ATT APN if that would work? that is the only thing i can possibly think of that could potentially solve my problem. I Thank you in advance for all of the knowledge that is shared here at the forums. :good:
UDPATE**
I tried to install the stock revert for ATT 900a. loaded in odin fine but failed. I think from all the times i have tried to mess around with custom roms with no luck on installing any. I locked my sim card. When i went to the BYOP program with my verizon s5 it worked just fine. IDK.
jjeffries0423 said:
UDPATE**
I tried to install the stock revert for ATT 900a. loaded in odin fine but failed. I think from all the times i have tried to mess around with custom roms with no luck on installing any. I locked my sim card. When i went to the BYOP program with my verizon s5 it worked just fine. IDK.
Click to expand...
Click to collapse
I don't have enough knowledge to advise you in the apn arena, but trying to install ATT rom/tar on the vzw phone might give you a real slick looking paperweight.
haha it would if i didnt have the verizon revert back to stock ncg file
Another update,
I called straight talk and told them i wasnt sure what happened it all of a sudden stopped working and they are sending me another sim card to try
jjeffries0423 said:
Good Morning fellas,
I have been searching for about a week and I can usually fix my own issues with the help of the forums. But this one has me stumped. I have the Verizon S5, Had it rooted and then lost root. Got an OTA of Lollipop installed with no problem but of course couldnt root. I just got my phone back to NCG last night but the Major problem is I do not have any data without being on wifi. In the APN is only the verizon apn and its greyed out. Also can not add another apn. Straight talk runs on ATT APN info (TF DATA) I was wondering if it would be possible if i downloaded an ATT rom that added the ATT APN if that would work? that is the only thing i can possibly think of that could potentially solve my problem. I Thank you in advance for all of the knowledge that is shared here at the forums. :good:
Click to expand...
Click to collapse
You know they make a Verizon Sim for straight talk. I have one in my s4. Works well.
Sent from my SM-T707V using XDA Free mobile app
Enable native tethering on Galaxy Note 3 AT&T (SM-N900A) running Android 5.0
This is personally Tested on my Galaxy Note 3 running rooted OC1 5.0 Rom
and Galaxy S4 AT&T SGH-I337 running rooted 5.0 rom
Backup your existing TetheringProvision.apk (I just renamed my old one TetheringProvision.apk1)
place modded apk in system/app/TetheringProvision/
Make sure permissions are set as seen in screenshot
delete TetheringProvision/ARM folder before rebooting
Reboot device
????????????
Profit!
As always this is at your own risk
It works!! I have to delete TetheringProvision/arm and reboot. Thanks a bunch, have been looking for this for a while.
cgm8 said:
It works!! I have to delete TetheringProvision/arm and reboot. Thanks a bunch, have been looking for this for a while.
Click to expand...
Click to collapse
Awesome! Glad to hear that it worked for you.
Sofar I've far I have tested the modded APK on ;
AT&T Galaxy S4 on both Android 4.4.4 and 5.0
AT&T Samsung Galaxy Note 3 on Android 5.0
At&T Samsung Galaxy S5 on 4.4.2
AT&T Note 3 here and i can say it works and is much better than the last workaround i tried. Basically after using the tether I had to restart the phone to reenable wifi. :laugh:
Edit: Spoke too soon. When I turn off the hotspot wifi comes back on and connects. However, the occasional web page will refuse to load. Will only load 3/4 of the way unless I leave it for like 2 minutes. Pages with embedded video don't load within that time period at all. But youtube embeds work as does the app. Restarting the phone fixes everything.
At least it is progress in my case! Using an app before would cause wifi to show as toggeled on, but refused to connect or turn off.
Hello guys I'm new to the android devices I tried to install this apk file but it just tells me that it is not installed is their another app that I need to get this to work I just rooted my note 3 yesterday and upgraded to the lollipop thanks in advance
WaNam xposed for lollipop that's how.
Thanks for this
Galaxy Note 3 (9000A) on CricKet network running 4.4.2. Towelrooted months ago and TouchWiz recently began crashing, so I finally did a factory reset. Lost ability to hotspot tether using FoxFi/PdaNet. Did the reset change some settings? If so, how do I change them back? Perhaps someone more experienced could walk me through the apk change or point me to a "____ for Idiots" type tutorial.
Anyone try this on OC2?
kdubya said:
Galaxy Note 3 (9000A) on CricKet network running 4.4.2. Towelrooted months ago and TouchWiz recently began crashing, so I finally did a factory reset. Lost ability to hotspot tether using FoxFi/PdaNet. Did the reset change some settings? If so, how do I change them back? Perhaps someone more experienced could walk me through the apk change or point me to a "____ for Idiots" type tutorial.
Click to expand...
Click to collapse
If you are rooted, use Wanam Xposed & MotoTether. I use this method on Cricket. Then just use the native tether on phone.
forrest89sei said:
Enable native tethering on Galaxy Note 3 AT&T (SM-N900A) running Android 5.0
This is personally Tested on my Galaxy Note 3 running rooted OC1 5.0 Rom
and Galaxy S4 AT&T SGH-I337 running rooted 5.0 rom
Backup your existing TetheringProvision.apk (I just renamed my old one TetheringProvision.apk1)
place modded apk in system/app/TetheringProvision/
Make sure permissions are set as seen in screenshot
Reboot device
????????????
Profit!
As always this is at your own risk
Click to expand...
Click to collapse
cgm8 said:
It works!! I have to delete TetheringProvision/arm and reboot. Thanks a bunch, have been looking for this for a while.
Click to expand...
Click to collapse
Great thanks cgm8.
I spent almost 2 hrs based on OPs steps but it kept saying "TetheringProvision.apk failed" or something after each reboot and then I almost gave up.
Luckily I saw your post that we should delete the ARM folder so I thought of giving it a last try...just in case you know.
And BOOM... after deleting the ARM folder and rebooting again, no error and then when I went to settings to enable HotSpot, it enabled flawless...lol
OP, can you pls add this simple step i.e. delete TetheringProvision/ARM folder before rebooting so everyone gets 100% success in this...???
Anyway, thanks a lot OP for this or else nothing else matters...
Will Att still see you tethering without the correct plan?
aranurea said:
Anyone try this on OC2?
Click to expand...
Click to collapse
It should, I'm using it on OC2
ajfathers said:
Great thanks cgm8.
I spent almost 2 hrs based on OPs steps but it kept saying "TetheringProvision.apk failed" or something after each reboot and then I almost gave up.
Luckily I saw your post that we should delete the ARM folder so I thought of giving it a last try...just in case you know.
And BOOM... after deleting the ARM folder and rebooting again, no error and then when I went to settings to enable HotSpot, it enabled flawless...lol
OP, can you pls add this simple step i.e. delete TetheringProvision/ARM folder before rebooting so everyone gets 100% success in this...???
Anyway, thanks a lot OP for this or else nothing else matters...
Click to expand...
Click to collapse
Thanks for the updated specs, I'll update my post
cmatthewb101 said:
Will Att still see you tethering without the correct plan?
Click to expand...
Click to collapse
They may, But I've been lucky doing this with both Straight Talk (AT&T MVNO) and Cricket (AT&T MVNO)
forrest89sei said:
Awesome! Glad to hear that it worked for you.
Sofar I've far I have tested the modded APK on ;
AT&T Galaxy S4 on both Android 4.4.4 and 5.0
AT&T Samsung Galaxy Note 3 on Android 5.0
At&T Samsung Galaxy S5 on 4.4.2
Click to expand...
Click to collapse
hi where did you get a working rooted N900A OC1 i cant find any good one
Cricket (AT&T MVNO)
----------------------------------
Not to be picky but Cricket is not a reseller, but 100% AT&T with no middleman.
forrest89sei said:
Enable native tethering on Galaxy Note 3 AT&T (SM-N900A) running Android 5.0
This is personally Tested on my Galaxy Note 3 running rooted OC1 5.0 Rom
and Galaxy S4 AT&T SGH-I337 running rooted 5.0 rom
Backup your existing TetheringProvision.apk (I just renamed my old one TetheringProvision.apk1)
place modded apk in system/app/TetheringProvision/
Make sure permissions are set as seen in screenshot
delete TetheringProvision/ARM folder before rebooting
Reboot device
????????????
Profit!
As always this is at your own risk
Click to expand...
Click to collapse
tried this on my s4 i337 att running 5.0.1 and kingroot, seemed to work and could see the access point but then it kept resetting and saying access point active over and over. had to reboot to stop it. could it be kingroot, if so, will remove with supersume pro.
---------- Post added at 10:23 PM ---------- Previous post was at 09:41 PM ----------
vince954 said:
tried this on my s4 i337 att running 5.0.1 and kingroot, seemed to work and could see the access point but then it kept resetting and saying access point active over and over. had to reboot to stop it. could it be kingroot, if so, will remove with supersume pro.
Click to expand...
Click to collapse
an update. I used supersume pro, gave me trouble doing it so I had to remove some of the kingroot files manually. seems to be working, super su working. as for the apk provision files, no joy, seems something is different in 5.0.1 so i went with wifi tether router and that works just fine. finally, its been a long road to get here...
forrest89sei said:
Enable native tethering on Galaxy Note 3 AT&T (SM-N900A) running Android 5.0
This is personally Tested on my Galaxy Note 3 running rooted OC1 5.0 Rom
and Galaxy S4 AT&T SGH-I337 running rooted 5.0 rom
Backup your existing TetheringProvision.apk (I just renamed my old one TetheringProvision.apk1)
place modded apk in system/app/TetheringProvision/
Make sure permissions are set as seen in screenshot
delete TetheringProvision/ARM folder before rebooting
Reboot device
????????????
Profit!
As always this is at your own risk
Click to expand...
Click to collapse
I can confirm this working on my samsung galaxy go prime SM-G530A from at&t running on straight talk and lollipop 5.1.1. Much thanks to OP for this modded tetheringprovision.apk. follow instructions exactly as written and everything is smooth. Anyone else needing to root this phone first here is a link to working root
Samsung Galaxy Go Prime SM-G530A root
http://forum.xda-developers.com/showthread.php?t=3283066
Sent from my SAMSUNG-SM-G530A using XDA-Developers mobile app
I have Rooted NC1 lollipop flashed via SS recovery.
Followed all steps but hotspot not working.
Also there is no ARM folder inside TetheringProvision...
--------------------------------------------------------------------------------------
UPDATE , New Method to Enable Tethering Hotspot :
--------------------------------------------------------------------------------------
1. installed "XposedInstaller_3.0_alpha4.apk" (for lollipop)
2. Flashed "xposed-sdk21-arm-20150430-arter97-V3.zip" via softstrap recovery (Note 3 at&t only)
3. Rebooted and Installed "com.dym.motoxtether_v5_aa815c.apk".
4. Open Xposed Installer -> Modules -> Check X Tether Module and Reboot Phone.
5. Done !! Tethering is Working Now.
This Process has been tested on Note 3 AT&T Running on Lollipop 5.0 Stock.
All files attached here and taken from xda.
Thank you. The tether apk worked fine from the first post. And the xposed worked from the post above. I now believe my phone is as good as it can get while locked.
Sent from my DROID Turbo using XDA-Developers mobile app
Works like a charm - S5 Active G870A
I did the steps and its working, for now an hour with no issues. Even ran a few matches of Fortnite on the Xbox! There were some slightly different folders/names. But, I figured which ones to delete.
Thanks!
Is anybody else stuck on bog5 with no root?
Bren123 said:
Is anybody else stuck on bog5 with no root?
Click to expand...
Click to collapse
Haha.. plenty and what you try to go with this?
yeeeeeeeeeeeeees Meeeeeeee
Yup. New phone, came with OG5. 8-(
jnigrine said:
Yup. New phone, came with OG5. 8-(
Click to expand...
Click to collapse
I've replace mine twice in the past month via warranty replacement call to tech support. Both came in BOC4
what can i do with wifi tether without root on og5?
jnigrine said:
Yup. New phone, came with OG5. 8-(
Click to expand...
Click to collapse
AmanteNJ said:
what can i do with wifi tether without root on og5?
Click to expand...
Click to collapse
Foxfi app from the play store enables wifi hotspot without root
Chopstix9 said:
Foxfi app from the play store enables wifi hotspot without root
Click to expand...
Click to collapse
I used to have Foxfi installed but it stopped working after my wife installed the update. I end up wiping data and reinstall Foxfi to get it running again. Thanks
Has anyone tried this mobilego root on S5 OG5 yet? It successfully rooted the latest Verizon S4 5.1 rom so it might work on the S5. http://forum.xda-developers.com/showthread.php?t=3254434
aznjosh said:
Has anyone tried this mobilego root on S5 OG5 yet? It successfully rooted the latest Verizon S4 5.1 rom so it might work on the S5. http://forum.xda-developers.com/showthread.php?t=3254434
Click to expand...
Click to collapse
I tried it. Initial connection popped up some error messages in Windows, but I was then able to browse my apps files contacts etc from MobileGo. The "OneClickRoot" button, unfortunately, did not work. Threw an error and then my phone rebooted.