[Q] HTC HD2, I'm totally lost.. - HD2 Android Q&A, Help & Troubleshooting and Genera

Hi guys,
So, a long time ago a friend of mine put Android on my old HTC HD2, I've never really used it. But now, I need to use it and this ROM and stuffs sucks. I would like to unroot it, root it again, flash a new ROM and stuffs but I don't know how!
I'm totally lost with this HTC HD2. The actual ROM right now is a piece of s**t. I tried to Install an OpenRecoveryScript via GooManager it says that there isn't a recovery available for this device. I tried to reboot into recovery via ROM Manager and GooManager but it just simply boot the phone.
I can't go in recovery, I can't do anything, I've tried. Please help me!
Thank you so much!
ABOUT PHONE:
Android Version: 2.3.4
Kernel Version: 2.6.32.15_tytung_r10-gbdfeaac [email protected] #72
Mod Version: CynanogenMod-7-06072011-NIGHTLY-Desire[TyphooN_v3.3.5-MAGLDR]

MrRaph said:
Hi guys,
So, a long time ago a friend of mine put Android on my old HTC HD2, I've never really used it. But now, I need to use it and this ROM and stuffs sucks. I would like to unroot it, root it again, flash a new ROM and stuffs but I don't know how!
I'm totally lost with this HTC HD2. The actual ROM right now is a piece of s**t. I tried to Install an OpenRecoveryScript via GooManager it says that there isn't a recovery available for this device. I tried to reboot into recovery via ROM Manager and GooManager but it just simply boot the phone.
I can't go in recovery, I can't do anything, I've tried. Please help me!
Thank you so much!
ABOUT PHONE:
Android Version: 2.3.4
Kernel Version: 2.6.32.15_tytung_r10-gbdfeaac [email protected] #72
Mod Version: CynanogenMod-7-06072011-NIGHTLY-Desire[TyphooN_v3.3.5-MAGLDR]
Click to expand...
Click to collapse
Maybe you could have tried searching? The HD2 isn't a native Android phone, those things don't work. To get into recovery turn the phone off, long press power then use the volume keys and call button to select 8. AD Recovery in MAGLDR. You may need to change the partition size though, so to do that you can follow the guide in my sig. While I recommend you don't bother doing so, if you insist on wiping and starting afresh then just flash Task29 and again follow the guide in my sig. If you're not sure about what half of these terms mean then check out the guide to the terms in my sig.

Something similar happened to me some time ago. I think the best was is to factory restore the phone by downloading the original Windows 6.5 ROM to the SD card, reflashing it and then to start all over - upgrading radio, installing MAGLDR, etc.

Related

ONLY - Technical Support - ONLY

Disclaimer: As in every case your choice to flash any memory on your phone is YOUR decision and you run the risk of making a expensive Paperweight. Research Flashing and read post about new Rom's or Builds to learn from others mistakes.. There are a lot of risk takers here on XDA that will be glad to bite the bullet to help the community with rom stability and issues. But ultimately you CHOOSE to flash your phone Not us.
I created this thread for new users unfamiliar with Flashing and modding their phone to get technical Support for any technical Issue that comes up regarding the phone. However Please Avoid Posting things such as "I am bricked how do I fix" or "Help my phone doesn't Start up" Because they will not allow the more experienced users to Help you.
Suggestions:
1. List the following in the reply
- What Model Is your Phone (Should Be HTC Dream AKA Tmobile G1)
- What SPL are you using (Boot Holding Power + Camera then first line)
- What Recovery Image are you using(Stock, Jesus Freakes 1.42, 1.43 or HK)
- What Rom is Currently Loaded (Booted up go to Settings-> About Phone)
- What Radio do you have currently (Settings -> About Phone)
2. What are you Trying to do (Ultimate Goal)
3. What steps has you taken (In Detail please)
4. Once you problem has been resolved please Edit your Original Post indicating that it was resolved.
Thanks In advance for Keeping this thread Neat.
Some Reading Material for you:
APN Info Thread
General Questions Thread
G1 Wiki Thread
G1 Tips and Tricks Thread
jf recovery 1.43
doesnt seem like i need it because ive flashed beta 3 using 1.42 but i want it cause it has to have some capability that 1.42 doesnt right? Only problem is I have no idea how to flash it. I tried renaming the 1 in "haykuros hero rom" post to update.zip and it still said 1.42 when i went back 2 recovery. I dont use fastboot or adb or anything because I am a capital "N" noob and nothing seems to ever say how to do any of this stuff using a mac so.... that being said...can you help?
1. tmobile g1
2. haykuros latest spl
3. 1.42
4. ion
5. latest radio
goal: 1.43 recovery
steps taken: saw a lot of people ask the same question. searched. went back to the rooting thread attempted to enter the commands by pressing alt+x in the recovery console the way they were listed and placed the recovery.img file i unzipped from the hero thread on my sdcard. no luck.
build..?
I did my first fastboot recovery, even though I didn't need to. Pretty decent operation. Just wanted to get the feel of it. I think I'll be using nandroid and fastboot a whole lot in the near future
Goal: To either build myself, or at least play a part in the building of one sweetest ROM's. I guess i'll start small, with a theme.
(it's been a 12 pack of Mountain Dew and B movies kinda night.)
CC CEO said:
doesnt seem like i need it because ive flashed beta 3 using 1.42 but i want it cause it has to have some capability that 1.42 doesnt right? Only problem is I have no idea how to flash it. I tried renaming the 1 in "haykuros hero rom" post to update.zip and it still said 1.42 when i went back 2 recovery. I dont use fastboot or adb or anything because I am a capital "N" noob and nothing seems to ever say how to do any of this stuff using a mac so.... that being said...can you help?
1. tmobile g1
2. haykuros latest spl
3. 1.42
4. ion
5. latest radio
goal: 1.43 recovery
steps taken: saw a lot of people ask the same question. searched. went back to the rooting thread attempted to enter the commands by pressing alt+x in the recovery console the way they were listed and placed the recovery.img file i unzipped from the hero thread on my sdcard. no luck.
Click to expand...
Click to collapse
Installing JF Recovery 1.43 is just like any flash update for a rom...
You find and download the recovery file. Rename it to update.zip (Keep in mind that windows by default hides the.zip part so if you rename it to update.zip windows actually sees it as update.zip.zip.. This is a common problem.
Then Boot to SPL by powering off your phone and powering up with Home + Power Key.
Once loaded then hit Alt + L (If you don't have a modded Recovery already) and then If you have to wipe(which I usually do) Alt-W then you need to load the new firmware with Alt + S.
If all goes well it will load the new recover image and will reboot back into Recovery mode in which you just Home + Back to Exit and reboot.
I don't wanna step on anyones toes but I believe to load the new image after wipe it'll be alt + s....
Hero beta's
I've triend to install both Beta 2 & Beta 3 of the Hero build, but evertime it got to the setup screen it would force close. What can I do to get past this problem?
mvanwyk83 said:
I've triend to install both Beta 2 & Beta 3 of the Hero build, but evertime it got to the setup screen it would force close. What can I do to get past this problem?
Click to expand...
Click to collapse
With the beta 3 update update on your sdcard boot into recovery and wipe then flash then wipe again then reboot.
If you have a2sd already Use the adb recount Command and then adb shell to delete the system/sd/ folder.
Just a quick question:
I'm currently running
the Android 1.5r2 based Cyanogen build v3.3.1
1.43 recovery img
Hardspl
The latest radio update (the one with the I as the last character)
I would like to update to Haykuro's new bootloader to get more space and to be ready for the upcoming haykuro build, but I'm a bit scared by all the reports of phones getting bricked.
So my question is, if I install it using the update.zip on sd-card method, is there any chance of a brick?
Let me point out that I don't have a microsd card reader available, so I wont be able to flash the build I'm currently using right after updating the SPL. So far it's not entirely clear to me whether this can be a problem.
tia
Curunir said:
Just a quick question:
I'm currently running
the Android 1.5r2 based Cyanogen build v3.3.1
1.43 recovery img
Hardspl
The latest radio update (the one with the I as the last character)
I would like to update to Haykuro's new bootloader to get more space and to be ready for the upcoming haykuro build, but I'm a bit scared by all the reports of phones getting bricked.
So my question is, if I install it using the update.zip on sd-card method, is there any chance of a brick?
Let me point out that I don't have a microsd card reader available, so I wont be able to flash the build I'm currently using right after updating the SPL. So far it's not entirely clear to me whether this can be a problem. Tia
Click to expand...
Click to collapse
Before you consider flashing the new spl. Make sure you have a pvt revision board. Power + camera when turning on your phone. It will be at the top. If it says dvt don't flash.
You also need the 26I radio firmware.
If you do not have a memory card reader or a second memory card ten do not flash the new spl. Once you flash the spl, your phone will not boot until you flash a new Rom onto it
I believe this is correct. Anyone with experience care to confirm?
Actually now that I am rested and thinking straight.. Don't you load a recovery image by loading the recovery.img file on your sd card and booting to Bootloader?
Man I was sick and tired last night =)
Go to My Hero Thread and in the first post is the JF 1.43 Zip file you can use to Flash to JF 1.43 in update.zip format.
ubernicholi said:
With the beta 3 update update on your sdcard boot into recovery and wipe then flash then wipe again then reboot.
If you have a2sd already Use the adb recount Command and then adb shell to delete the system/sd/ folder.
Click to expand...
Click to collapse
Now is that process the same for Beta 4??
,
mvanwyk83 said:
Now is that process the same for Beta 4??
Click to expand...
Click to collapse
Should be. Can anyone confirm?
I put some music on beta 4. The album cover is in my pics but doesnt show where it should when playing music, do i need to somehow manually put it there?
Am I asking this in the right place even? thanks
1.
Tmobile G1
SPL: DREA100 PVT 32B
Firmware version: 1.5
Baseband Version: 62.50S.20.17H_2.22.19.26I
Kernel Version: 2.627-00392-g8312baf [email protected]
Build Number: dream_devphone-userdebug 1.5 CRB21147201 test-keys
2. Upgrade to the Dudes Build (http://forum.xda-developers.com/showthread.php?t=507151) and backing up all my data and apps
3. Tried to update (by naming his build update.zip and updating) and also tried backing up data using the commands in his post (listed above)
cronin4392 said:
1.
Tmobile G1
SPL: DREA100 PVT 32B
Firmware version: 1.5
Baseband Version: 62.50S.20.17H_2.22.19.26I
Kernel Version: 2.627-00392-g8312baf [email protected]
Build Number: dream_devphone-userdebug 1.5 CRB21147201 test-keys
2. Upgrade to the Dudes Build (http://forum.xda-developers.com/showthread.php?t=507151) and backing up all my data and apps
3. Tried to update (by naming his build update.zip and updating) and also tried backing up data using the commands in his post (listed above)
Click to expand...
Click to collapse
What errors did you get or what problems are you having?
stuck on android screen
hey guys, this morning i got the OTA cupcake update, and my phones been running fine all day, however, i just restarted it and its stuck on the android logo screen, it shows the shine going through the logo like it is loading but after a few seconds it stops, then does it again, is my phone shot? please, any help will be greatly appreciated
rschuman90 said:
hey guys, this morning i got the OTA cupcake update, and my phones been running fine all day, however, i just restarted it and its stuck on the android logo screen, it shows the shine going through the logo like it is loading but after a few seconds it stops, then does it again, is my phone shot? please, any help will be greatly appreciated
Click to expand...
Click to collapse
Wipe your phone. Press and hold home+power. Continue to hold it till youe see a caution triangle. Press alt+l and then alt+w when its done select reboot from the top of the list. Good luck
Quick Question
I am running the newest of everything, currently on Hero BUild 4
What actions should be taken to downgrade to the older SPL. I am getting extremely bad battery with this and can't handle it.
Mast3rmatt said:
Quick Question
I am running the newest of everything, currently on Hero BUild 4
What actions should be taken to downgrade to the older SPL. I am getting extremely bad battery with this and can't handle it.
Click to expand...
Click to collapse
From what I know, its a bad idea to downgrade your spl. Check you screen brightness and your screen time out if you are running an overclock program, try setting it to 384 max 128 min. Double check to make sure your screen actually times out. See if your wifi is running, as well as your gps. If you use twidroid change the rate from 5 minutes to 1 hour
i have to wipe my entire phone and loose everything now!!?

[SOLVED] 2.1 Rooting issue & GSM Hero (White screen, green htc logo, stuck)

[Solved]
Hi there.
I got hold of this second hand phone.
I dont think its been modified in any way yet.
Last night the phone asked me about doing a update. So i did.
After the green progress bar completed i got to a white screen containing a green htc logo. And its stuck there in a loop.
So... I cant turn my device on... whyyyy? :'(
All i can do is to get into the standard htc recovery.
And into the hboot. Some place there it says:
HERO CVT SHIP S-ON
HBOOT-1.76.0007 (HERO10000)
MICROP-010f
TOUCH PANEL-SYN0104
RADIO-6.35.15.11
Aug 4 2009,19:43:30
I have done a wipe and a hard reset. Still it get this white screen on death. (WSOD) Im sodding of to bed...
You now know that it doesnt have a nandroid backup, and that I cant connect the phone via a usb connection to pc. And I dont have any custom recovery installed.
Ive tried to recover from a offical rom with a update.zip copied with a card reader onto the sd. Ive tried a few. The recovery see's the file. But when i try to install it it says "Verification failed Installation aborted"
Ive tried the recovery-RA-hero-v1.7.0.1.img, but without a usb I cant figure out how. Is there a way around for installing RA with just a sd card?
Please, does anyone have a good solution here.
Or some helpfull info to point me in the right way.
Sincererly,
Thor
See these threads similar,... Should be easy to sort.
http://forum.xda-developers.com/showthread.php?t=786938
and http://forum.xda-developers.com/showthread.php?t=787483
Good morning
Thanks, ive been looking at that.
My Win7 pc wouldnt show the ADB Interface in manage devices.
Only thing that pops up is a disk drive called HTC Android Phone USB Device, USB Mass Storage Device and a USB Composite Device.
Im gonna try this on my windows xp machine later today.
Hope it finds my phone, if not... what can i do?
So you need to update drivers as per the link in those threads,... Have you done that already pal?
Sent from my HTC Hero using XDA App
Hi again
Yes, I followed every step on that RUU driver guide on my win 7. But the drivers doesnt pop up as they should.
So I cant install the correct drivers since it doesnt show.
Halfway solution!
I got a breakthrough.
1. Remove the battery and replace it.
2. Hold volume down/up and tap power button. (htc enters hboot)
3. Taps back (enters fastboot)
4. Connects USB Cable (fastboot changes to fastboot usb)
5. Computer finds device My HTC.
Then i run this:
_HTC Hero_RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe
I got this from the htc pages. The software says i have ROM version 3.32.405.1
So i have a newer one installed then the one they have on web!?
I choose update on the software, now it tries to install 2.73.405.5
I got a half working usb connection now.
Fastboot restarted and changed to RUU USB.
Then i get a Error: 140 / 131 Bootloader version fail.
Can it be that the hard reset ive done messed up the bootloader version.
For me it looks like the phone is still in a new version ROM.
Anyone vise got anything to say about this?
Kind regards,
Thor
Aha,.... Ok, thats probs because the RUU you're using is older than the ROM already installed.
Try this one... RUU_Hero_HTC_WWE_3.32.405.1_R_Radio_63.18.55.06P_6 .35.15.11_release_signed.exe
That is the unbranded ROM,...
Wow
Suddenly everything klicked back into place!
Im past the white screen of death!
That RUU link was flawless for my device.
And the fastboot RUU USB installed everything.
Im back in business.
Much appericated m8
No problem. Now do us a favour and put [SOLVED] into your thread title. Thanks.
So...
Any suggestions on what i should do with it now?
Gotta root it i guess.
Then install recovery RA.
Any suggestions for a good rom to try?
Thanks again,
Thor
theres loads, but my suggestion would be villainrom 12 for a 2.1 sense rom, or froydvillain for a 2.2 rom
Ok
How do i know if i have a 2.1 sense rom or a 2.2 rom?
Or was that a dumb question from me, since you meant to install those?
Im kind of new, just left ye olde nokia behind
lol... Ok,... So you used the 3.32 RUU yeah? That is stock 2.1. If you used the other one, that is 1.5. Use BTDAGs guide in my sig to find out how to flash custom ROMs.
I also recommend Villain 12 for 2.1,... Or Froyd for 2.2. Depends if you like the SenseUI or not. Take a look at both in the Dev section.
Ok
Yes, I definitly want to have the Sense UI.
So then i wanna try out installing a villainrom 12 on a 2.1 sense rom.
Settings - Software Information now says:
Firmware version: 2.1-update1
Baseband version: 63.18.55.06PU_6.35.15.11
Kernel version: 2.6.29-063c4d24 [email protected] #1
Build number: 3.32.405.1 CL191507 release-keys
Software number: 3.32.405.1
This is what i have on it now.
I tried doing the phone software update again, when it asked me again.
Got the same error. So I did the usb install over again. All ok again.
Note: The update it tries out is 3.32.405.2 (5.87MB)
So... can i follow BTDAG's guide from here?
Or do i have to downgrade or update something first?
Guess i have to choose Superuser for Android 2.0~2.2 when i do the rooting with androot.
I got a problem in that guide when typing su in the terminal window.
I didnt get the "Super User Request Prompt" as it told about.
Ive now tried terminal from both usb and the terminal emulator.
WHen i try to do the SU or the flash_image recovery command i get permission denied!?
Without su rights i can do the flash_image recovery /sdcard/recovery.img command, since i need the su permissions.
Thanks again,
Thor
Hi again
I cant seem to get the SU rights i need.
Ive used universal nandroid for the rooting! (it tells its now ok)
But i cant flash in the custom recovery image.
Ive now tried a different approach:
1. Installing the ROM Manager and trying out ClockworkMod recovery(its installs ok)
2. Then I boot into recovery by holding the home(house) and power on, I get the white screen of htc death again and it goes into a black screen with a red triangle and a ! on it.
3. Then I release home and power on.
4. Presses down volume up and taps power on.
5. The hero boots into the standard recovery!?
(I think the way im starting up, are reflashing the recovery. am i right?)
Clockwork also have a "flash RA 1.7 recovery" option, ive tried that one too.
But with the same result...
Any one know about this?
Best regards,
Thor Elvin
Solution for life!
After a lot of surfing i found it!
This great tut worked for my device:
http://www.villainrom.co.uk/forum/s...o-Root-The-2.1-RUU-or-OTA-Update-For-The-Hero
I got a blue carebear in the background, and im making a big grin!
Now im rooted and backed up.
Great thanks to Pulser for a great tut.
Edit: VillainROM12 installed 1
PEACE Y'ALL!!!
QUOTE=thorelvin;8284640]After a lot of surfing i found it!
This great tut worked for my device:
Pulser did...
I got a blue carebear in the background, and im making a big grin!
Now im rooted and backed up.
Edit: VillainROM12 installed 1
PEACE Y'ALL!!![/QUOTE]
Dude, nice that you got sorted. I have kids so Carebears are good to have around. Respect to Carebears, and at the same time it would be cool and revisit the forum and thank Pulser, else thank him here as Pulser_g2 (i think). He sort of wrote, reworked the tut originally from the cdma version here. Sorted me too going 2.1 to 2.2. I had shedloads of fun with roms in between but its only thanks to him.
I guess this could be classed as one of those "Circle of life" philosophy budhist type **** things cuz the answer was really where you started, but for me... its all about takin care of the Carebears....
For the record his contract ends around May so get your Hero fix requests in early...!
Soz Pulser... And massive thanks for the opening to a new dimension for my hero...

[Q] Help to installing new android nand rom.

hello I'm a new noob and i just want some help =)
I have been installing Android 2.3.3 nand and flashing cyanogenmod on my HTC HD2 for fist time since winmo 6.5 (I've been following a guide that i will post in the comments), but i don't like the cyanogenmod, and will try an other rom. The problem is that every time i try to install the new rom, and came to that part where it should boot in to the magldr, the magldr just boot me in to my old android 2.3.3. does anyone know how i can install the new rom? THANKS
simply the problem is that i don't know how to boot in to magldr after installing android nand. Because every time i boot my device it boot with the magldr in to my android 2.3.3.
I've been seaching everywhere but I just can't find the ansawer.
this is the guide I've been using youtube.com /watch?v=57Gyl9BtjlU I'm surry but i can't post links.
It sounds like when you switch on you are not holding the button down, hold it down until you get past the loading screen & it gets into the magldr menu.
Thank you very much
it always seems like we overlook the small things. i wrote myself a little cheat sheet of the steps to do intill i got use to it, i found that very helpful.
dont forget to wipe data/cache/delvic each time you flash a new rom.
I know but thanks anyway

[q] y u no make me root??

Hey Guys,
at first, i hope this question isnt coming again and again, but i couldn't find anything helpful (for ME!) yet.
I have the HTC HD2 and got really tired of Windows Phone 6.5, so i changed it to Android. (Took me weeks to figure that out until it worked)
My current ROM:
Android 2.2 HTC Desire
Kernel 2.6.32.15 by cotulla
I use Magdlr and boot from NAND.
Superuser Elite is installed (bought it), but i cant update it - no matter what i do, it wont let me be root. I even tried the terminal, but when i type in "su" it directly says "permission denied". The problem is, my phone memory is low and i cant install apps directly on the sd-card (never found a guide how to get this automatically done).
What can i do??
i am rly desperate... the sad thing is, my boyfriend (yes, i am a girl) isnt much into smartphone stuff though he's got the new htc sensation - and also not into unix / linux systems - it seems all the guys i know besides only use an iPhone and google won't be my friend...
PLS PLS PLS HELP ME!
oh and sry for the bad language, grammar etc - i'm german ;-)
that is an old, out of date rom. It was the first proof of concept release when cotulla created magldr, so i would advise you to move to a different more recent rom. (We now have roms running android 2.3, 3 and even some early android 4 roms.)
There are very very few roms that flash in quite the same way, now, so you would need to learn about flashing CWM(clockwork, clockworkmod, clockwork recovery, it has several names)
Go get the 'android toolkit' from the android nand section, and then go read some of the guides from HERE
Mialeelay said:
Hey Guys,
at first, i hope this question isnt coming again and again, but i couldn't find anything helpful (for ME!) yet.
I have the HTC HD2 and got really tired of Windows Phone 6.5, so i changed it to Android. (Took me weeks to figure that out until it worked)
My current ROM:
Android 2.2 HTC Desire
Kernel 2.6.32.15 by cotulla
I use Magdlr and boot from NAND.
Superuser Elite is installed (bought it), but i cant update it - no matter what i do, it wont let me be root. I even tried the terminal, but when i type in "su" it directly says "permission denied". The problem is, my phone memory is low and i cant install apps directly on the sd-card (never found a guide how to get this automatically done).
What can i do??
i am rly desperate... the sad thing is, my boyfriend (yes, i am a girl) isnt much into smartphone stuff though he's got the new htc sensation - and also not into unix / linux systems - it seems all the guys i know besides only use an iPhone and google won't be my friend...
PLS PLS PLS HELP ME!
oh and sry for the bad language, grammar etc - i'm german ;-)
Click to expand...
Click to collapse
does it have app2sd built in the rom?
does the rom need sd-ext?
are you using tmobile or eu hd2?
MORE U EXPLAIN,MORE HELP U GET LOL
for a start,download link2sd from the market its free and easy to use,open the app,choose ext2,if a error msg appears,IGNORE IT for now and click on any app thats moveable u want to move to see if that works 1st
Old, outdated ROM with no root access. Use a newer one.
Yep its an old ROM. Don't worry though, you'll be able to redownload superuser on a new ROM. Just do what Sam says and it'll work fine. Surprised you even knew that you could flash android on to the hd2, because "you're a girl".
= What are you even doing asking whether or not you should root your phone on XDA?! =
ok guys thank you for the detailed informations!
i didnt know the rom is outdated - i guess installing a new one is the best idea in that case. i thought of that before, but it took me so long to get this one working so i wasn't in the mood for re-installing yet.
THANK YOU all, i will let you know if it worked - in case i cant fix this, would someone be able to help me via teamviewer?
Mialeelay said:
ok guys thank you for the detailed informations!
i didnt know the rom is outdated - i guess installing a new one is the best idea in that case. i thought of that before, but it took me so long to get this one working so i wasn't in the mood for re-installing yet.
THANK YOU all, i will let you know if it worked - in case i cant fix this, would someone be able to help me via teamviewer?
Click to expand...
Click to collapse
I'm pretty sire you won't need to give remote access, you'll be able to do it. All you'll need is the latest magldr 1. 13 (if I'm not mistaking)
Once you've got that, you just need to flash the clockwork mod daf file from usb flasher on magldr, then when you flash into clockwork its easy, just flash a zip file.
You can backup ROM's etc. from clockwork so its really convenient.
= What are you even doing asking whether or not you should root your phone on XDA?! =
I totally crashed it!!
Hi Guys - it has happened
i totally crashed my hd2.
what i did:
i read the guides and got the newest android nand toolkit. so, i performed task29 and installed hspl, then clk. the problem now is: i cant do anything else! when i boot, i get this white clk screen where i can choose recovery normal or sboot. i cant repartition, my phone has no connection when i switch into the mode "with the 3 colours"... so - i can copy to sd card what i want, i can perform every task with the toolkit, even the backup rom for the original windows phone doesnt help because it says: "pls check that you're phone is connected via usb". my pc has the android usb drivers, it shows the device, all ok. i cant go into usb flasher because it seems, no magldr is installed - i tried and tried so many things and now i cant even perform a wipe.
seems i need to give you remote access anyway....
PLEASE! help me!
if you need screenshots i will upload them, just let me know.
Start from the beggining by reflasing with the 3 colours on the screen, im no expert and I use magloader not clk, so try doing a fresh one with magloader and see how it goes
Mialeelay said:
Hi Guys - it has happened
i totally crashed my hd2.
what i did:
i read the guides and got the newest android nand toolkit. so, i performed task29 and installed hspl, then clk. the problem now is: i cant do anything else! when i boot, i get this white clk screen where i can choose recovery normal or sboot. i cant repartition, my phone has no connection when i switch into the mode "with the 3 colours"... so - i can copy to sd card what i want, i can perform every task with the toolkit, even the backup rom for the original windows phone doesnt help because it says: "pls check that you're phone is connected via usb". my pc has the android usb drivers, it shows the device, all ok. i cant go into usb flasher because it seems, no magldr is installed - i tried and tried so many things and now i cant even perform a wipe.
seems i need to give you remote access anyway....
PLEASE! help me!
if you need screenshots i will upload them, just let me know.
Click to expand...
Click to collapse
Plug the phone into the PC. Hold the back arrow key after turning the phone on to boot to fastboot . Then either try flashing Cwm via the NAND toolkit or do it manually through fastboot.
P. S. Did you install a radio?
Sent from my HD2 using XDA App
try to do it the way "typhoon" discribed it in his thread
http://forum.xda-developers.com/showthread.php?t=933951
under "Clean Install MAGLDR" with "Install tutorials"
(ich hab´s so gemacht und es funktionierte super)
thank you all, i will try the typhoon way out now..
Mialeelay said:
Hi Guys - it has happened
i totally crashed my hd2.
what i did:
i read the guides and got the newest android nand toolkit. so, i performed task29 and installed hspl, then clk. the problem now is: i cant do anything else! when i boot, i get this white clk screen where i can choose recovery normal or sboot. i cant repartition, my phone has no connection when i switch into the mode "with the 3 colours"... so - i can copy to sd card what i want, i can perform every task with the toolkit, even the backup rom for the original windows phone doesnt help because it says: "pls check that you're phone is connected via usb". my pc has the android usb drivers, it shows the device, all ok. i cant go into usb flasher because it seems, no magldr is installed - i tried and tried so many things and now i cant even perform a wipe.
seems i need to give you remote access anyway....
PLEASE! help me!
if you need screenshots i will upload them, just let me know.
Click to expand...
Click to collapse
Flash HSPL 3 pkg pick 2.0.8. HSPL, Than Task29 than use the toolkit and pick clk partition than when thats done hold back button and select recovery click install and follow the prompts. than hold home until you see recovery menu.
I DID IT
THANK YOU ALL!
I finally got it working

ERROR: ERROR: Cannot read ramdisk image

Hello guys,
Does anyone know what does this message mean:"ERROR: ERROR: Cannot read ramdisk image"?
It appeared on my HD2 while I was installing an Android ROM on it and now I cannot run any other OS on it but Windows Mobile. I tried Google but had no luck. Only one person as far as I understood experienced this problem but I have no reply from him and I am not even sure if he managed to solve the problem anyway.
So, if anyone knows something about it I would be happy to hear. Any help would be useful. Thanks in advance!
Best regards
zgeorgiev said:
Hello guys,
Does anyone know what does this message mean:"ERROR: ERROR: Cannot read ramdisk image"?
It appeared on my HD2 while I was installing an Android ROM on it and now I cannot run any other OS on it but Windows Mobile. I tried Google but had no luck. Only one person as far as I understood experienced this problem but I have no reply from him and I am not even sure if he managed to solve the problem anyway.
So, if anyone knows something about it I would be happy to hear. Any help would be useful. Thanks in advance!
Best regards
Click to expand...
Click to collapse
Did u flashed radio ?
I reflashed radio, did task29, flashed hspl, flashed Magldr, flashed stock WM ROM from my PC, then again from sd card and no result. WM ROM works ok but that's it. No Android or WP7 can be flashed. In order to be more specific, here is what I do:
1. HSPL 2.08
2. task29 with Radio 2.15
3. Magldr
4. CWM
And when I try to enter AD Recovery from the Magldr menu I receive the message I mentioned in my first post and there is nothing more to be done but using the phone with WM which in my opinion makes out of my HD2 a piece of crap.
zgeorgiev said:
I reflashed radio, did task29, flashed hspl, flashed Magldr, flashed stock WM ROM from my PC, then again from sd card and no result. WM ROM works ok but that's it. No Android or WP7 can be flashed. In order to be more specific, here is what I do:
1. HSPL 2.08
2. task29 with Radio 2.15
3. Magldr
4. CWM
And when I try to enter AD Recovery from the Magldr menu I receive the message I mentioned in my first post and there is nothing more to be done but using the phone with WM which in my opinion makes out of my HD2 a piece of crap.
Click to expand...
Click to collapse
Let mi simple u Task29 and Radio Rom
Task 29 - When u do task 29 to phone u delete everything even radio rom. So the thing u need to do is do this for magldr :
-Task29
-Radio Rom
-Magldr
-CWM
-Wipe
-Flash Rom
-Calibrate battery (some roms do it itself)
If it will make u easier i can make tutorial but im pretty much sure there is milions of them .
Try that way and report if it worked . Its 30min process.
EDIT: HD2 powered by WM is crippled yea. Android is far superiour even withou cam. But let me tell u one thing first thing why i tooked HD2 is Windows by stock and customization possible. Didnt carred about low battery etc. Windows is till now unbeatable bussines platform. iOs is near but its not it. Android hard to get bussines capable like windows 7. What I mean windows is bussines ready,iPhone is kinda ready and on android u have to customize like hell to get everything (at least what I as system admin need)
Task29 does not delete your radio. I was sure of it because I had flashed my phone a lot of times in the past, but anyway, I tried your method and the result was the same. When I install Magldr and then CWM, the phone does not let me enter the CWM menu so I cannot continue with the flashing of the Android ROM itself. It is just not possible without CWM. I also tried cLK method but when I press and hold the home key, the phone restarts and I get to a dead end once again. Thanks for your help anyway.
As far as WM is concerned, there is absolutely no chance for me to use this phone with this OS. if I cannot find a way to manage the problem I will just sell the phone and buy a native Android one which will make things much easier for me.
Best regards
Which rom are u trying to install?
Sent from my HTC HD2 using Tapatalk
It is all the same which one because when you are not able to enter the CWM menu you cannot install anything, but for instance, let's say this one: http://forum.xda-developers.com/showthread.php?t=1264828
I had problems booting that rom too. Try this one http://forum.xda-developers.com/showthread.php?t=1326217 almost perfect. Mwakious has some bugs i w8 for him to fix it
You don't follow what I say. I cannot enter CWM menu so I cannot even start flashing any ROM, it doesn't matter which one it is.
Merry Christmass by the way!
Which windows mobile u have/had ? Can u run android from sd ? Can u tell me exact procedure u tried to install nand android? If u want to try ffaster u can pm me to send u skype or gtalk.
Hi
I have the same issue, in bootloader on ad recovery.. i get cannot read ramdisk image, I will not uninstall ANDROID, because I will no longer support android, if I can not install any other roms
Any other advice, but to not lose my actual ROM!!!!
PS: I had installed ROM Manager latest, and installed clockwork from rom manager, Till then the recovery worked....
Had the same problem yesterday. I used the HD2 Toolkit to repartition, by the way it installs Recovery 5.
Then everything worked fine.
Sent from my NexusHD2 using XDA Premium App
Reaper1337 said:
Had the same problem yesterday. I used the HD2 Toolkit to repartition, by the way it installs Recovery 5.
Then everything worked fine.
Sent from my NexusHD2 using XDA Premium App
Click to expand...
Click to collapse
And do I lose my actual ANDROID ROM?
And How to use that toolkit?
THANK YOU IN ADVANCE!
EDIT:
I managed to fix my problem by HD2 Toolkit 4.2.0.1 with Maglrd update recovery.
THANK YOU!!!
rilley said:
I managed to fix my problem by HD2 Toolkit 4.2.0.1 with Maglrd update recovery.
Click to expand...
Click to collapse
Could you please explain me step by step how exactly you managed to solve the problem. I installed HD2 Toolkit 4.2.0.1 and try to use Update recovery function but the console that opens after I start the process freezes and I cannot continue. There is an explanation in it saying that probably the USB connectin is not good. However I use the USB flasher in Magldr menu for this connection between the phone and the PC and I don't know another way to connect both devices for the installation process. Is there something that I am missing?
By the way The message that I receive now when I try to open CWM changed from "...cannot read ramdisk image" to "...cannot read kernel image". Does it make any difference?
Thanks in advance!
@By the way The message that I receive now when I try to open CWM changed from "...cannot read ramdisk image" to "...cannot read kernel image". Does it make any difference?
For this question I do not know any answer, but for USB Connection I know because I had the same problem:
Put your phone in debugging mode.. and connect it to PC..
Use usbdeview to delete any android drivers from that list..
Then in device manager find any new hardware, and right click, and update: Browse my driver manually> Let me pick my driver> find the driver from http://forum.xda-developers.com/showthread.php?t=1090783 find "Download Drivers By T-Macgnolia", and after that you need to find Android Driver installed in device manager, after that hd2 toolkit will work.
Solution
You have to copy the files in the. Zip attachment inside the SD.
Make the whole process as usual, but instead choose the option you choose AD Recovery Boot option AD DS.
This way you can access the recovery menu and load the rom.
regards
Thx a lot!!!
This worked for me- just perfect!!!
Mikel
Worked for me as well, thanks very much, I was about to see how far the phone could fly.
Thanks
Hi, and many thanks.
I fixed my error like a charm.
Had the same problem
Thank you, this realy helped me out!

Categories

Resources