[Q] Help to installing new android nand rom. - HD2 Android Q&A, Help & Troubleshooting and Genera

hello I'm a new noob and i just want some help =)
I have been installing Android 2.3.3 nand and flashing cyanogenmod on my HTC HD2 for fist time since winmo 6.5 (I've been following a guide that i will post in the comments), but i don't like the cyanogenmod, and will try an other rom. The problem is that every time i try to install the new rom, and came to that part where it should boot in to the magldr, the magldr just boot me in to my old android 2.3.3. does anyone know how i can install the new rom? THANKS
simply the problem is that i don't know how to boot in to magldr after installing android nand. Because every time i boot my device it boot with the magldr in to my android 2.3.3.
I've been seaching everywhere but I just can't find the ansawer.

this is the guide I've been using youtube.com /watch?v=57Gyl9BtjlU I'm surry but i can't post links.

It sounds like when you switch on you are not holding the button down, hold it down until you get past the loading screen & it gets into the magldr menu.

Thank you very much

it always seems like we overlook the small things. i wrote myself a little cheat sheet of the steps to do intill i got use to it, i found that very helpful.
dont forget to wipe data/cache/delvic each time you flash a new rom.

I know but thanks anyway

Related

[Q] Urgent help needed please

Hi, I need some help from you guys, I'm a noob in these things, anyway I was on Windows mobile 6.5 (Not a T-mobile) , and thought about changing into an android. I found some tutorials on youtube, and tryied to do It exactly as It said. Ok, so I found this video on youtube with a link on It, I clicked It, which directed me to one website. I installed the Hard HSPL folowing the instructions, then It said to install a Windows Mobile ROM, I downloaded and installed "Chucky Droid Rom" and now my phone Is like in between the Windows and Android, some kind of weird screen like theres no OS on it. Then it says to download and put Android Rom into my SD card, after downloading "FroyoStone_Sense_V2", I also deleted everything from the SD card except the Android directory. After i push CLRCAD, I start "haret", but it just shows me very little text on top of the screen, which fades away in like 5 seconds. After that i get "Sleep of Death" the screen just keeps black, unless i restart my phone. I tryied to wait for like 40minutes hoping it will start somehow, but the situation didn't change... So can somebody please help me? How do i boot my phone to android, what should I do to get that penguin with a lot of flashing text on my phone instead of this "Sleep of Death" What am I doing wrong? Thanks for answer guys.
What is your intention with running Android, do you just want to experiment with it and use it as a dual boot, ie still have winmo and then boot to Android, or would you like to replace winmo with Android? If the first option, then you will need to flash a full winmo rom as AFAIK ChuckyDroid is an extremely light rom that basically just allows you to boot to an Android rom.
If your intention is to only run Android then you should be looking at the NAND Android roms as this replaces winmo totally and the phone boots straight to Android. If you would like to do this, then follow the link in my signature on Flashing NAND roms, it is a very good tutorial and gives you step by step instructions on what to do.
Does it work on European HD2? Because i think i have the problem, because my HD2 is not a T-mobile and i did everything as it said step by step, which would give directions for a T-mobile. I think thats the issue to the problem...
Vettelis said:
Does it work on European HD2? Because i think i have the problem, because my HD2 is not a T-mobile and i did everything as it said step by step, which would give directions for a T-mobile. I think thats the issue to the problem...
Click to expand...
Click to collapse
The process is practically the same the only difference is that with NAND TMOUS get more storage then EU HD2, unless you have EXT partition on SD card. Anyway what radio are you currently running this could be why android wont run off SD card.
Ricey
Thanks for the help guys, after I installed the correct radio it works perfectly.

[Q]no more android builds booting

hi guys i have a very strange problem
after a week that i tried wp7 i decided to go back to wm + andro sd....
i already did other times and everything was going well...
i did task29 to install my usual energy rom...copied back my usual android rom backup...but...
Android dosnt load...its stuck at "htc page" for hours...i tryed different rom...tried the same build of my backup and nothing happens...
now i went back to wp7 and set for dual boot from maglar...always stucked at htc screen...
i really need andro for google maps until wp7 have his version...im going crazy!
anyone ever had the same problem?
i tryed different wm builds before try wp7 dual boot but always the same problem
with a fresh installation of android after 2 hours of wait (i was sleeping hehe) data.img isnt created...tried to put a fresh one from the stock rom but nothing
hoping my english is understandable i say "THANKS" to all for every suggestion
This isnt the questions forum this is the development forum.
uooops! i posted in the wrong tab hehe i have about 15 xda tab open at the same time...can i move this or only admins can?
Try This
xardus said:
hi guys i have a very strange problem
after a week that i tried wp7 i decided to go back to wm + andro sd....
i already did other times and everything was going well...
i did task29 to install my usual energy rom...copied back my usual android rom backup...but...
Android dosnt load...its stuck at "htc page" for hours...i tryed different rom...tried the same build of my backup and nothing happens...
now i went back to wp7 and set for dual boot from maglar...always stucked at htc screen...
i really need andro for google maps until wp7 have his version...im going crazy!
anyone ever had the same problem?
i tryed different wm builds before try wp7 dual boot but always the same problem
with a fresh installation of android after 2 hours of wait (i was sleeping hehe) data.img isnt created...tried to put a fresh one from the stock rom but nothing
hoping my english is understandable i say "THANKS" to all for every suggestion
Click to expand...
Click to collapse
I had the same issue. Try loading an official WM6.5 rom. Dont task29. Then load magldr, then CWM them flash build of choice. you should be fine.
Let me know if it works for you please.
nattyd said:
I had the same issue. Try loading an official WM6.5 rom. Dont task29. Then load magldr, then CWM them flash build of choice. you should be fine.
Let me know if it works for you please.
Click to expand...
Click to collapse
i will try this evening at pc...but im not very practice with short words...cwm stands for?
i have to task29 to go back from wp7 cos with new roms the update tool dsnt connect
CWM = ClockWorkMod
Instructions
xardus said:
i will try this evening at pc...but im not very practice with short words...cwm stands for?
i have to task29 to go back from wp7 cos with new roms the update tool dsnt connect
Click to expand...
Click to collapse
Hope this is helpful.
As Nick.C has pointed out CWM = ClockWorkMod Recovery. Im assuming this is the method you are using to flash your builds.
I did not mean for u not to use task29 at all. Follow the steps below and all should be well.
1. Task29 to remove Windows Phone 7
2. Flash official WM6.5 Build (DO NOT Task29)
3. Download and use SD Formatter 3.0 to format SD Card. Set option to Full Erase and Size adjustment to ON.
4. Install MGLDR 1.13
5. Flash CWM
6. Flash your favorite android build.
just to be sure...after flash official rom...i think i need to hspl before flash maglrd
i know i should read mag installation guide...but...im stuck in highway and im too lazy to find it hehehe
xardus said:
just to be sure...after flash official rom...i think i need to hspl before flash maglrd
i know i should read mag installation guide...but...im stuck in highway and im too lazy to find it hehehe
Click to expand...
Click to collapse
If you have flashed custom roms before, then you already have HSPL installed, because u cant flash custom roms without it. HSPL is always there until you remove it, even if you flash an official or custom rom.
To flash MGLDR - Boot into the boot loader screen (Multi Color Screen) and then flash MGLDR
To flash CWM - Boot into MGLDR and select usb flasher then flash CWM. Some chefs have there own custom CWM so read there instruction so u will know if you will use the original CWM or their version.
sd card block size?
Thread moved to Q&A.

[Q] -Specific- question about rooting.

Please, dear XDA'ers, take a little bit of time apart for a newbie at rooting. :l
I'm an Annoying Noob to you, as you probably already guessed. But I made this account, because I want to root my phone to Android gingerbread, with a -STABLE- sense (2.1+)3.0 UI.
So I had my eyes on THIS one: http://forum.xda-developers.com/showthread.php?t=1038694
BUT! I'm REALLY a noob at rooting. I've tried HaRET rooting, with a Nexus android Rrom, well... That didn't go too well, because via my SD things would become veeeery slow after a while. So I NAND rooted my phone to Android Gingerbread 2.3.3. I'm quiete happy with it, but it's not really the HTC feeling I get when I look at the UI.
So I saw sense 3.0 and fell in love.
Well enough about that. I have an HTC HD 2, it's NAND rooted and it's European... ALL I want is a STABLE sense 3.0 rom... That works for my phone.
Now I was wondering, if I would instal it... Would it work properly for me? None of us are sure. So that's why I want to back-up my ROM. With Clockwork rom recovery tool... you know, from the market. Well I get a very annoying error every time I try to back-up my data. I did flash the app to it's most current version, but when I want to make a back-up, my phone just reboots... and does... basically, nothing.
I don't want to mess up my phone entirely. So what should I do first, dear XDA'ers? Please, I just don't want my data to get lost. I tried multiple tutorials but none seem to have the answer to my problem!
sense 2.1 and sense 3 roms aren't stable yet. they have graphic glitches and camcorder problems. but if you don't consider these problems you can live with it. i may recommend http://forum.xda-developers.com/showthread.php?t=1075703 and http://forum.xda-developers.com/showthread.php?t=1124757. in order to prepare your phone for different nand roms you ca use http://forum.xda-developers.com/showthread.php?t=1090783.
mutil said:
sense 2.1 and sense 3 roms aren't stable yet. they have graphic glitches and camcorder problems. but if you don't consider these problems you can live with it. i may recommend http://forum.xda-developers.com/showthread.php?t=1075703 and http://forum.xda-developers.com/showthread.php?t=1124757. in order to prepare your phone for different nand roms you ca use http://forum.xda-developers.com/showthread.php?t=1090783.
Click to expand...
Click to collapse
I will try this, and if I can't figure it out I will come back to this thread and whine more.
In any case, I think it's appropriate to thank you, it's the least I can do.
btw i think your phone has hspl 2.08 and mgldr?!
rom manager dont work with magldr.
To make a backup boot into cwm manually:
hold power down while rebooting -> magldr screen should appear
Then navigate to ad recovery-> backup and restore..rest should be clear.
..i wonder, how you installed nand roms, without to know how to boot to recovery? oO
j4n87 said:
rom manager dont work with magldr.
To make a backup boot into cwm manually:
hold power down while rebooting -> magldr screen should appear
Then navigate to ad recovery-> backup and restore..rest should be clear.
..i wonder, how you installed nand roms, without to know how to boot to recovery? oO
Click to expand...
Click to collapse
I just raped my phone I think. I had HSPL installed, and MAGLDR and I think some other stuff too, so I used the first rom the first poster linked, and I downloaden the two files it told me to download in the instructions... I installed the custom RUU from that first rom, and then my phone kinda died. It only said "HTC" in green, and it diidn't do anything. So I flashed it back to WinMob 6.5. Now I have WinMob 6.5 (rom 1.66 or something I think) and I'm not sure what to do next. I don't want to brick my phone and I don't want WinMob 6.5 either.
*Sigh* I wonder if I'll ever understand rooting.
So just to clarify, I have HSPL (I'm sure it's the correct one too.) And I have MAGLDR installed on my phone. And I don't get the instructions from said thread.
<_> My brain is molten.
if you have come until mgldr don't give up. download the nand tool kit i mentioned a few posts before.choose and download a simple rom for beginning (you may take tyweens typhoon) put it in your sd. after that you will take a few steps. don't be afraid,many people (including me) faced same problems.
mutil said:
if you have come until mgldr don't give up. download the nand tool kit i mentioned a few posts before.choose and download a simple rom for beginning (you may take tyweens typhoon) put it in your sd. after that you will take a few steps. don't be afraid,many people (including me) faced same problems.
Click to expand...
Click to collapse
Thing is, I don't want a simple rom... I'm stubborn like that, hehehe...
I want a sense 3.0 rom, but I'm not sure how to follow the instructions in the thread. It uses terms I've never heard from before...
Well, if there's a stable android 2.3.3/2.3.4 rom with sense 2.1, I'd consider that! Also, I hate the MAGLDR boot screen... you know, "Go go go!" I saw a rom with a very smooth and pretty boot screen... I'd try that too!
i just say if you can succeed to flash one, then you will learn the steps. after that you can try a different rom everyday,as i do
mutil said:
i just say if you can succeed to flash one, then you will learn the steps. after that you can try a different rom everyday,as i do
Click to expand...
Click to collapse
I will, hahaha. I just want my phone to be a real HTC phone, so I'm looking for a rom that actually has sense... If you have a suggestion...?
since your hd2 is eu, you should also use sd-ext partition have you done this?
mutil said:
since your hd2 is eu, you should also use sd-ext partition have you done this?
Click to expand...
Click to collapse
Yes, I have. I made a 2 gig EXT-4 partition. I just don't know what to do with it. I have Radio Leo installed, MAGLDR, HSPL... CWM and all that.
I tried flashing the two roms you suggested in your first post but they are stuck on the boot screen. I don't know what I'm doing wrong...
have you made necessary cwm partitions using usb flasher and nand toolkit?
and how did you make a 2 gb ext4 partition

[Q]noob questions and noob help

hey guys i just got my htc hd2 and ive been playing with it lately but i cant seem to "crack the code" of this whole customization thing
i have been reading the guides and its been confusing and more confusing and more confusing now im completely lost cause i have no idea where the radio is coming from the custom rom or the file names that are mentioned in the guide. no doubt i feel dumb and retarded but a little help would be appreciated please and thank you.
i have htc hd2 t-mobile north america 1024 mb
i have installed hspl through the tool kit dont know if it worked or not i tried check it all looks the same to me. i dont know what to do next through the tool kit or the guides im trying to install cm7 nightly fingers crossed and still trying and phone isnt bricked. so any help would be great cause i have no understanding of what is going on at all like i am out, totally out of my mind trying to figure out the terms and procedures.
if anybody could point me to an extremely noob guide that would be great cause i read some and my brain is dead.
thanks alot appreciated to the max
http://forum.xda-developers.com/showthread.php?p=11097380
You have to be careful when flashing the radio on a tmous model. This is where you can brick your phone. Do not use the radio that is used in the guide. I think it is not compatible Ruth the tmous hd2. Read here about it when you do not know what your doing. You should not start flashing before you understood everything what you do.
This is a step by step guide which you would have found when reading the stickies....
Sent from my HD2
alright...calm down. Before you want to embark on any customization, ensure you have the correct HSPL and a radio on your phone. First enter the bootloader. Check your current SPL version. It should read HSPL2.08 if you have flashed HSPL correctly. If its correct, download and flash Leo_RADIO_2.15.50.14** (http://forum.xda-developers.com/showthread.php?t=611787). If you want to flash any another radio, ensure it is a .50 version(x.xx.50.xx**) After flashing the radio, enter the bootloader and check if the HSPL and radio is correct before you move on. If you want to flash a custom WM rom (http://forum.xda-developers.com/forumdisplay.php?f=534), please do. Ensure that the ROM is compatible with the TMOUS HD2 (compatibility will normally be stated in the first post). A complete and detailed guide on all of the above can be found here (http://forum.xda-developers.com/showthread.php?t=653614).
I understand that you want CM7 on your phone. To play safe, i recommend that you stick with windows mobile and tinker with a SD Android build before you to venture into dual booting WP7 and android.
Download an Android SD build (http://forum.xda-developers.com/forumdisplay.php?f=735). I am using AmeriCan Android (http://forum.xda-developers.com/showthread.php?t=957652). After extracting,copy the Android Folder into the root of your sd card. Boot into WM, navigate to the Android folder using the file explorer and tap 'clrcad' followed by 'haret'. Android will now boot(first boot will take some time).
Hope this helps and like what rauschkugl said, kindly do some research and reading first. Try the tutorials out and after you are comfortable with flashing, you can move on to WP7, NAND android and dual booting between Wp7 and SD Android: http://forum.xda-developers.com/showpost.php?p=17282874&postcount=3 (ignore step 1).
Gd luck flashing and enjoy!. Do ask if you are really unsure of something.
kawshigan said:
alright...calm down. Before you want to embark on any customization, ensure you have the correct HSPL and a radio on your phone. First enter the bootloader. Check your current SPL version. It should read HSPL2.08 if you have flashed HSPL correctly. If its correct, download and flash Leo_RADIO_2.15.50.14** (http://forum.xda-developers.com/showthread.php?t=611787). If you want to flash any another radio, ensure it is a .50 version(x.xx.50.xx**) After flashing the radio, enter the bootloader and check if the HSPL and radio is correct before you move on. If you want to flash a custom WM rom (http://forum.xda-developers.com/forumdisplay.php?f=534), please do. Ensure that the ROM is compatible with the TMOUS HD2 (compatibility will normally be stated in the first post). A complete and detailed guide on all of the above can be found here (http://forum.xda-developers.com/showthread.php?t=653614).
I understand that you want CM7 on your phone. To play safe, i recommend that you stick with windows mobile and tinker with a SD Android build before you to venture into dual booting WP7 and android.
Download an Android SD build (http://forum.xda-developers.com/forumdisplay.php?f=735). I am using AmeriCan Android (http://forum.xda-developers.com/showthread.php?t=957652). After extracting,copy the Android Folder into the root of your sd card. Boot into WM, navigate to the Android folder using the file explorer and tap 'clrcad' followed by 'haret'. Android will now boot(first boot will take some time).
Hope this helps and like what rauschkugl said, kindly do some research and reading first. Try the tutorials out and after you are comfortable with flashing, you can move on to WP7, NAND android and dual booting between Wp7 and SD Android: http://forum.xda-developers.com/showpost.php?p=17282874&postcount=3 (ignore step 1).
Gd luck flashing and enjoy!. Do ask if you are really unsure of something.
Click to expand...
Click to collapse
bro thanks alot for your help i have a few questions and conerns since i have read most of the guides and im nothing but confused cause im just looking to do a nandroid install on my htc through magldr.
i have installed hspl and the radio.
question#1) radio .50 and above that you install what differences are there and how can you tell ?
question#2 i am using hd2 android nand toolkit cause i used to have SGS vibrant and i used a similar tool kit which makes your life so so so so so easy cant thank god enough for that. so can i just use that and keep running and gunning my htc hd2 down with it.?
question #3 how do i know which rom is compatible etc etc the page of the original rom is soo detailed its like im lost to find the download file but i figured it out that i am looking to get magldr file but still the compatibility with north american htc hd2 and etc etc.
naifs_br10 said:
bro thanks alot for your help i have a few questions and conerns since i have read most of the guides and im nothing but confused cause im just looking to do a nandroid install on my htc through magldr.
i have installed hspl and the radio.
question#1) radio .50 and above that you install what differences are there and how can you tell ?
question#2 i am using hd2 android nand toolkit cause i used to have SGS vibrant and i used a similar tool kit which makes your life so so so so so easy cant thank god enough for that. so can i just use that and keep running and gunning my htc hd2 down with it.?
question #3 how do i know which rom is compatible etc etc the page of the original rom is soo detailed its like im lost to find the download file but i figured it out that i am looking to get magldr file but still the compatibility with north american htc hd2 and etc etc.
Click to expand...
Click to collapse
UPDATES# i have used tool kit and successfuly installed my first magldr 1.13 now i need to know how to flash the rom so if i could get some help that would be great and any recommendations for the top notch roms around here would be soo soo soo appreciated. thanks in advance.
naifs_br10 said:
UPDATES# i have used tool kit and successfuly installed my first magldr 1.13 now i need to know how to flash the rom so if i could get some help that would be great and any recommendations for the top notch roms around here would be soo soo soo appreciated. thanks in advance.
Click to expand...
Click to collapse
update i have installed my first nand cm7 rom feels awesome thanks alot everybody.
any good roms or suggestions for ones with good gps and battery life ?
did you install clockworkmod. if not you should do it because all new roms need it to be installed. i'm running ndt miui right now and for the last 5 month or something like that. tried a lot of roms but battery life on miui in comparison to cm7 was a lot better for me. it also has some nice features that cm doesn't have. but you should try it on your own.
i really can recommend the ndt roms from langthan. he gives great support in his threads and the roms are fast and stable.
rauschkugl said:
did you install clockworkmod. if not you should do it because all new roms need it to be installed. i'm running ndt miui right now and for the last 5 month or something like that. tried a lot of roms but battery life on miui in comparison to cm7 was a lot better for me. it also has some nice features that cm doesn't have. but you should try it on your own.
i really can recommend the ndt roms from langthan. he gives great support in his threads and the roms are fast and stable.
Click to expand...
Click to collapse
my friend if i have installed a rom already do i need to repeat the procedure again to reinstall new roms or what is it only necessary that i need to do please explain to me or forward me to a sticky so i can learn and understand i would greatly appreciate it thank you very much
naifs_br10 said:
my friend if i have installed a rom already do i need to repeat the procedure again to reinstall new roms or what is it only necessary that i need to do please explain to me or forward me to a sticky so i can learn and understand i would greatly appreciate it thank you very much
Click to expand...
Click to collapse
to make a clean install you can begin from start (task 29, flash radio etc.)
but to be more practical, if you flash with the same nand partition size you can wipe data factory reset from ad recovery and you can flash new rom.
if they have different nand sizes then you just wipe data factory reset from recovery then apply new cwm partition using usb flasher, then flash new rom.
but all rom cookers recommend clean installation (including reformatting and repartitioning sd)
naifs_br10 said:
my friend if i have installed a rom already do i need to repeat the procedure again to reinstall new roms or what is it only necessary that i need to do please explain to me or forward me to a sticky so i can learn and understand i would greatly appreciate it thank you very much
Click to expand...
Click to collapse
clockworkmod is for installing roms without the need of a pc. you can also backup your whole rom and restore it. so it is very usefull.
you would have to got to magldr to install it. then you can start cwm by selecting ad recovery in magldr. then cwm will start. if you want to install a rom now all you have to do is put the zip file of the rom to the root of your sd card and select install zip from sd in cwm menu. then chose your rom zip and your done. all new roms use cwm installable zips. so this is the only way to get able to use new roms.

[Q] How to delete NAND android?

Hello everyone,
I bought an HTC HD2 a few days ago, (not a new one) And it was installed with UltimateDroid, I don't really like this version, and Sense doesn't work on it, so I was wondering if I can delete it, and how.
And if I delete it, Will my phone automatically run Windows mobile?
I'm new to this and this is my first time with android and htc, So I don't know anything about it.
Hope someone can help..
You have to flash a new rom using AD Recovery Tool
Easiest thing for you to do would be to start from scratch or follow this guide. You shouldn't need to do step 1 and you will already have the prerequisites. This is for Android, not WinMo.
For WinMo, download a ROM and flash it from bootloader. See the Windows Mobile dev stickies for detailed instructions (you will be able to ignore the HSPL part.)
try the guide on addictive tips:how-to-install-android-on-internal-nand-memory-of-htc-hd2-with-magldr
how to wipe all my data... is it possible native duel boot... winnow vs android...
SharonThirza said:
Hello everyone,
I bought an HTC HD2 a few days ago, (not a new one) And it was installed with UltimateDroid, I don't really like this version, and Sense doesn't work on it, so I was wondering if I can delete it, and how.
And if I delete it, Will my phone automatically run Windows mobile?
I'm new to this and this is my first time with android and htc, So I don't know anything about it.
Hope someone can help..
Click to expand...
Click to collapse
What do you want in stead of UltimateDroid?
Android with sense, or WM6.5?
We need to know this in order to give you proper help.
I personally recommend Android, WM6.5 is a dying OS...
selvag said:
how to wipe all my data... is it possible native duel boot... winnow vs android...
Click to expand...
Click to collapse
Dual boot is possible, WinMo on NAND, Android from SD, you can even have Ubuntu Linux on SD at the same time for triple boot.
To wipe data if you plan on going back to Windows Mobile on NAND, just flash a Windows Mobile ROM at the tri-color bootloader screen (boot the device up while holding the vol - key)
If you have Android on NAND, and want to keep Android but just want to wipe data, there's an option for that in CWM Recovery.
If you have WinMo on NAND, and just want to do a data wipe/factory reset, power on while holding both volume keys and follow the on-screen prompt
If you want to format your NAND memory, there is a tool called task 29, but it's not necessary.
If you're asking whether you can run both Windows Mobile and Android from NAND, no. It's one or the other
se1988 said:
What do you want in stead of UltimateDroid?
Android with sense, or WM6.5?
We need to know this in order to give you proper help.
I personally recommend Android, WM6.5 is a dying OS...
Click to expand...
Click to collapse
Sorry for the late reply, I want Android with sense! I have no experience with flashing roms etc. Never done anything like it before.
OK really first do you have magLDR or cLK ... when you turn on phone does it immediately go to boot screen or do you see some running script followed by 1,2,3,4,5,6 ... go go go!
if you have go go go the simply go to the Dev forums find a rom with (magLDR) in the title and follow instructions. they almost have a link to the best recovery to use with their rom.
if you boot straight up like a native android, or you can charge your phone when its turned off you have cLK ... to the dev forums and look for (cLK) in title and again follow instructions and get to it.
rubledub said:
OK really first do you have magLDR or cLK ... when you turn on phone does it immediately go to boot screen or do you see some running script followed by 1,2,3,4,5,6 ... go go go!
if you have go go go the simply go to the Dev forums find a rom with (magLDR) in the title and follow instructions. they almost have a link to the best recovery to use with their rom.
if you boot straight up like a native android, or you can charge your phone when its turned off you have cLK ... to the dev forums and look for (cLK) in title and again follow instructions and get to it.
Click to expand...
Click to collapse
It says the 1,2,3,4,5,6.. go go go! thing, but I can also choose to go to boot screen, which gives me all kinds of numbers with flash rom and stuff.
But thanks, I'll have a look!

Categories

Resources