[Q]noob questions and noob help - HD2 Android Q&A, Help & Troubleshooting and Genera
hey guys i just got my htc hd2 and ive been playing with it lately but i cant seem to "crack the code" of this whole customization thing
i have been reading the guides and its been confusing and more confusing and more confusing now im completely lost cause i have no idea where the radio is coming from the custom rom or the file names that are mentioned in the guide. no doubt i feel dumb and retarded but a little help would be appreciated please and thank you.
i have htc hd2 t-mobile north america 1024 mb
i have installed hspl through the tool kit dont know if it worked or not i tried check it all looks the same to me. i dont know what to do next through the tool kit or the guides im trying to install cm7 nightly fingers crossed and still trying and phone isnt bricked. so any help would be great cause i have no understanding of what is going on at all like i am out, totally out of my mind trying to figure out the terms and procedures.
if anybody could point me to an extremely noob guide that would be great cause i read some and my brain is dead.
thanks alot appreciated to the max
http://forum.xda-developers.com/showthread.php?p=11097380
You have to be careful when flashing the radio on a tmous model. This is where you can brick your phone. Do not use the radio that is used in the guide. I think it is not compatible Ruth the tmous hd2. Read here about it when you do not know what your doing. You should not start flashing before you understood everything what you do.
This is a step by step guide which you would have found when reading the stickies....
Sent from my HD2
alright...calm down. Before you want to embark on any customization, ensure you have the correct HSPL and a radio on your phone. First enter the bootloader. Check your current SPL version. It should read HSPL2.08 if you have flashed HSPL correctly. If its correct, download and flash Leo_RADIO_2.15.50.14** (http://forum.xda-developers.com/showthread.php?t=611787). If you want to flash any another radio, ensure it is a .50 version(x.xx.50.xx**) After flashing the radio, enter the bootloader and check if the HSPL and radio is correct before you move on. If you want to flash a custom WM rom (http://forum.xda-developers.com/forumdisplay.php?f=534), please do. Ensure that the ROM is compatible with the TMOUS HD2 (compatibility will normally be stated in the first post). A complete and detailed guide on all of the above can be found here (http://forum.xda-developers.com/showthread.php?t=653614).
I understand that you want CM7 on your phone. To play safe, i recommend that you stick with windows mobile and tinker with a SD Android build before you to venture into dual booting WP7 and android.
Download an Android SD build (http://forum.xda-developers.com/forumdisplay.php?f=735). I am using AmeriCan Android (http://forum.xda-developers.com/showthread.php?t=957652). After extracting,copy the Android Folder into the root of your sd card. Boot into WM, navigate to the Android folder using the file explorer and tap 'clrcad' followed by 'haret'. Android will now boot(first boot will take some time).
Hope this helps and like what rauschkugl said, kindly do some research and reading first. Try the tutorials out and after you are comfortable with flashing, you can move on to WP7, NAND android and dual booting between Wp7 and SD Android: http://forum.xda-developers.com/showpost.php?p=17282874&postcount=3 (ignore step 1).
Gd luck flashing and enjoy!. Do ask if you are really unsure of something.
kawshigan said:
alright...calm down. Before you want to embark on any customization, ensure you have the correct HSPL and a radio on your phone. First enter the bootloader. Check your current SPL version. It should read HSPL2.08 if you have flashed HSPL correctly. If its correct, download and flash Leo_RADIO_2.15.50.14** (http://forum.xda-developers.com/showthread.php?t=611787). If you want to flash any another radio, ensure it is a .50 version(x.xx.50.xx**) After flashing the radio, enter the bootloader and check if the HSPL and radio is correct before you move on. If you want to flash a custom WM rom (http://forum.xda-developers.com/forumdisplay.php?f=534), please do. Ensure that the ROM is compatible with the TMOUS HD2 (compatibility will normally be stated in the first post). A complete and detailed guide on all of the above can be found here (http://forum.xda-developers.com/showthread.php?t=653614).
I understand that you want CM7 on your phone. To play safe, i recommend that you stick with windows mobile and tinker with a SD Android build before you to venture into dual booting WP7 and android.
Download an Android SD build (http://forum.xda-developers.com/forumdisplay.php?f=735). I am using AmeriCan Android (http://forum.xda-developers.com/showthread.php?t=957652). After extracting,copy the Android Folder into the root of your sd card. Boot into WM, navigate to the Android folder using the file explorer and tap 'clrcad' followed by 'haret'. Android will now boot(first boot will take some time).
Hope this helps and like what rauschkugl said, kindly do some research and reading first. Try the tutorials out and after you are comfortable with flashing, you can move on to WP7, NAND android and dual booting between Wp7 and SD Android: http://forum.xda-developers.com/showpost.php?p=17282874&postcount=3 (ignore step 1).
Gd luck flashing and enjoy!. Do ask if you are really unsure of something.
Click to expand...
Click to collapse
bro thanks alot for your help i have a few questions and conerns since i have read most of the guides and im nothing but confused cause im just looking to do a nandroid install on my htc through magldr.
i have installed hspl and the radio.
question#1) radio .50 and above that you install what differences are there and how can you tell ?
question#2 i am using hd2 android nand toolkit cause i used to have SGS vibrant and i used a similar tool kit which makes your life so so so so so easy cant thank god enough for that. so can i just use that and keep running and gunning my htc hd2 down with it.?
question #3 how do i know which rom is compatible etc etc the page of the original rom is soo detailed its like im lost to find the download file but i figured it out that i am looking to get magldr file but still the compatibility with north american htc hd2 and etc etc.
naifs_br10 said:
bro thanks alot for your help i have a few questions and conerns since i have read most of the guides and im nothing but confused cause im just looking to do a nandroid install on my htc through magldr.
i have installed hspl and the radio.
question#1) radio .50 and above that you install what differences are there and how can you tell ?
question#2 i am using hd2 android nand toolkit cause i used to have SGS vibrant and i used a similar tool kit which makes your life so so so so so easy cant thank god enough for that. so can i just use that and keep running and gunning my htc hd2 down with it.?
question #3 how do i know which rom is compatible etc etc the page of the original rom is soo detailed its like im lost to find the download file but i figured it out that i am looking to get magldr file but still the compatibility with north american htc hd2 and etc etc.
Click to expand...
Click to collapse
UPDATES# i have used tool kit and successfuly installed my first magldr 1.13 now i need to know how to flash the rom so if i could get some help that would be great and any recommendations for the top notch roms around here would be soo soo soo appreciated. thanks in advance.
naifs_br10 said:
UPDATES# i have used tool kit and successfuly installed my first magldr 1.13 now i need to know how to flash the rom so if i could get some help that would be great and any recommendations for the top notch roms around here would be soo soo soo appreciated. thanks in advance.
Click to expand...
Click to collapse
update i have installed my first nand cm7 rom feels awesome thanks alot everybody.
any good roms or suggestions for ones with good gps and battery life ?
did you install clockworkmod. if not you should do it because all new roms need it to be installed. i'm running ndt miui right now and for the last 5 month or something like that. tried a lot of roms but battery life on miui in comparison to cm7 was a lot better for me. it also has some nice features that cm doesn't have. but you should try it on your own.
i really can recommend the ndt roms from langthan. he gives great support in his threads and the roms are fast and stable.
rauschkugl said:
did you install clockworkmod. if not you should do it because all new roms need it to be installed. i'm running ndt miui right now and for the last 5 month or something like that. tried a lot of roms but battery life on miui in comparison to cm7 was a lot better for me. it also has some nice features that cm doesn't have. but you should try it on your own.
i really can recommend the ndt roms from langthan. he gives great support in his threads and the roms are fast and stable.
Click to expand...
Click to collapse
my friend if i have installed a rom already do i need to repeat the procedure again to reinstall new roms or what is it only necessary that i need to do please explain to me or forward me to a sticky so i can learn and understand i would greatly appreciate it thank you very much
naifs_br10 said:
my friend if i have installed a rom already do i need to repeat the procedure again to reinstall new roms or what is it only necessary that i need to do please explain to me or forward me to a sticky so i can learn and understand i would greatly appreciate it thank you very much
Click to expand...
Click to collapse
to make a clean install you can begin from start (task 29, flash radio etc.)
but to be more practical, if you flash with the same nand partition size you can wipe data factory reset from ad recovery and you can flash new rom.
if they have different nand sizes then you just wipe data factory reset from recovery then apply new cwm partition using usb flasher, then flash new rom.
but all rom cookers recommend clean installation (including reformatting and repartitioning sd)
naifs_br10 said:
my friend if i have installed a rom already do i need to repeat the procedure again to reinstall new roms or what is it only necessary that i need to do please explain to me or forward me to a sticky so i can learn and understand i would greatly appreciate it thank you very much
Click to expand...
Click to collapse
clockworkmod is for installing roms without the need of a pc. you can also backup your whole rom and restore it. so it is very usefull.
you would have to got to magldr to install it. then you can start cwm by selecting ad recovery in magldr. then cwm will start. if you want to install a rom now all you have to do is put the zip file of the rom to the root of your sd card and select install zip from sd in cwm menu. then chose your rom zip and your done. all new roms use cwm installable zips. so this is the only way to get able to use new roms.
Related
dual boot windows mobile and android
hi guys. I wanted to ask how i can run dual boot on my hd2 t mobile (windows mobile and android...) What should i do...?
Well,this was really one of the most frequently asked questions and there have been many tutorials so far.You could have done a bit of research before asking the question. But no worries, since you are asking, i will just post the links for the step by step tutorial. 1) For HSPL: http://forum.xda-developers.com/showthread.php?t=653614 Follow the steps. Only steps 1-3 will apply for you. Step 3 is optional,unless you want to flash a custom WM ROM. 2) For Radio: http://forum.xda-developers.com/showthread.php?t=611787 Download Leo_RADIO_2.15.50.14**. If you want to download a lower radio, ensure that it is a .50 version(x.xx.50.xx....). 3) For Android build: http://forum.xda-developers.com/forumdisplay.php?f=735 Download any Android build you want. I am using AmeriCan Android(http://forum.xda-developers.com/showthread.php?t=957652). After extracting,copy the Android Folder into the root of your sd card. Boot into WM,navigate to the Android folder using the file explorer and tap 'clrcad' followed by 'haret'. Android will now boot(first boot will take some time) 4) For dual boot apps: http://forum.xda-developers.com/showthread.php?t=733752 http://forum.xda-developers.com/showthread.php?t=723200 Download any one of the dual boot apps you want. But for both, ensure that you install them in the device,not SD Card. These apps will let you choose if you want to choose WM or Android. It also automatically executes 'clrcad' and 'haret' from the Android folder, so its just a matter of choosing the OS you want. Done.Ensure that you backup your contacts,settings,etc via PIM backup or if you are using a different backup app,you can use that as well. Also, follow all steps in the links clearly. If you have any questions, ask. Failure to comply with instructions may brick your HD2. I hope this helps and kindly do a bit of research before posting questions here. But since this involves flashing, i am helping, so that the chances of you bricking your phone is minimised.
there's also exceller's android loader http://forum.xda-developers.com/showthread.php?t=737001 if you have problems with SD android look in my sig, my troubleshooter solves most of them
ty for helping guys i was occupied with my lt (was broken...)... But now i have a question for you... When i go to boot loader i see that the SPL version is 2.08.HSPL ... Should i flash it again with HSPL4 or just flash with another wm rom (i want to change it so...). Ty for reply
king_slavcho said: ty for helping guys i was occupied with my lt (was broken...)... But now i have a question for you... When i go to boot loader i see that the SPL version is 2.08.HSPL ... Should i flash it again with HSPL4 or just flash with another wm rom (i want to change it so...). Ty for reply Click to expand... Click to collapse If you are wanting to dual boot Windows Mobile and Android then you do not even need HSPL. You only need HSPL if you want to flash anything to the NAND of the HD2. Android from SD runs via the SD card and does not effect the NAND in any way. So no you do not need to flash HSPL again.
ok ty very much i made the dual boot... yeeey ... can you give me a good WM rom? i flashed my hd2 with the ugliest rom ever
Check out the Energy ROMs, people seemed to love them.
Hey guys, I have done quite a bit of searching around and have not really found a direct answer. I have dualboot American Android running and I want to update it. What are the proper procedures in updating a dual boot ROM? Thanks
eioous said: Hey guys, I have done quite a bit of searching around and have not really found a direct answer. I have dualboot American Android running and I want to update it. What are the proper procedures in updating a dual boot ROM? Thanks Click to expand... Click to collapse You can update it by changing the contents of the android directory. You should have a backup of your data Sent from my HTC Desire HD using XDA App
[Q] Some inf please
Good day to all I am new to the site and would like to say hi to everybody, especially the developers doing awesome work. I am from South Africa and not sure which rom to use. I want to install Android on my HD2. I am on the Vodacom network I have read here that installing wrong rom can brick the phone. If any body can point me in the correct direction it will be appreciated, also the correct install process. I downloaded Team Blue Roid rom but not sure how to install. Enjoy the day
Heres what you'll want to do: Install HSPL Flash a X.XX.50.XX radio Install MAGLDR Install CWM Recovery with the proper size partition layout for the Android ROM you wish to use. The partition size is usually listed on the the first or second post of the ROM's thread Place the rom.zip file at the root of your sd card With the sd card in the phone, boot into MAGLDR, and go into CWM Recovery (AD Recovery), choose Flash zip from sd card, choose zip from sd card, and flash the rom I would recommend using the HD2 NAND Toolkit to flash HSPL, MAGLDR, and CWM Recovery. It makes it much simpler than doing each thing as its own separate process. http://forum.xda-developers.com/showthread.php?t=1090783&highlight=toolkit You can run any Android ROM on your HD2, just follow the directions I have listed here in order, and read and follow the directions in the thread where you find your rom Sent from my HTC HD2 using XDA App
KickassDealer said: Good day to all I am new to the site and would like to say hi to everybody, especially the developers doing awesome work. I am from South Africa and not sure which rom to use. I want to install Android on my HD2. I am on the Vodacom network I have read here that installing wrong rom can brick the phone. If any body can point me in the correct direction it will be appreciated, also the correct install process. I downloaded Team Blue Roid rom but not sure how to install. Enjoy the day Click to expand... Click to collapse Hi new user! Right direction -> http://forum.xda-developers.com/showthread.php?t=915663 Always read the stickies, that is where you will find ALL the information you need. If not, there is always the search function Good luck!
This is a very good guide to installing full NAND Android on the HD2. I followed this, and it made it very simple and clear. The main thing to understand is that if you read and follow instructions, you will NOT brick your phone. Good luck
[Q] Installing NexusHD2-ICS-4.0.3-CM9 V1.2
Hi guys, I bought a HTC HD2 from Ebay and it had Android NexusHD-2-Gingerbread V3.0 NAND already on it. But I want to put NexusHD2-ICS-4.0.3-CM9 V1.2 on it now and I couldnt find a complete tutorial on how to do it most tutorials just explain certain parts e.g. installing clockworkmod, MAGLDR etc. So do I have to factory reset the phone and then put ICS on it or can i just upgrade it? Thanks in advance.
Maybe read at first this http://forum.xda-developers.com/showthread.php?t=893948 I start allways with task29, install magldr (or clk), recovery with 5/200/5 (for Rom you want to install). Make backup your SD-card and to partition the right way (with 1gb ext3 or ext4) Afterwards copy the ROM zip to your sd card and install. This is only a short way to go ahead with Android Rom flashing. More detailed tutorials you will find . If you stuck on some point, let us know.. Have Fun
CLK worked better for me i recommend it
clk makes ur phone more native like but there are plenty of guides available and there is also an hd2 bible in the development section.
demdex said: CLK worked better for me i recommend it Click to expand... Click to collapse It's depend from needs. See the difference http://forum.xda-developers.com/showthread.php?t=1114053
Become very familiar with the HD2 Toolkit, it will be your good friend. http://forum.xda-developers.com/showthread.php?t=1090783 It's a good start. good luck
[Q] whats the easiest way to install android
Hi, I have the hdc hd2 with spl 3.03.0000 xe, and radio 2.15.161.3. You maybe able to tell by that that im new to this, but want to install android as i dont like windows 6.5. I've managed to install a stock windows rom with the information i've learned here. But now i need help. I want to install froyo or gingerbread as ive used these before on other phones. So what is the easies way to do it and wheres the best place to get the rom from. Please try to make it as simple as possible, Thanks.
It depends, do you want NAND Android or are you happy with running SD Android? Basically, if you want SD Android it couldn't be simpler. Just go to the SD section, download a build, place the Android folder on the root of your SD card and hit CLRCAD then HARET in the file manager. If you want NAND Android it's still pretty straightforward. Follow this guide and you should be fine. If you find even this guide too complex try using the NAND Toolkit. If you can't use that, don't bother flashing NAND Android and stick with SD Android.
Have you tried using Google? <<< I'm flaming. Why didn't you look for the Newbies' Guides that are floating everywhere? they will guide you from the moment you pay for your phone till you are welcomed with Android's welcome screen. <<<I'm trying to be nice. Here you go : http://forum.xda-developers.com/showthread.php?t=893948 , from start to finish. <<< I'm being nice. Choose wisely ... EDIT: It always takes more time to write a poem than it does to write an article You were faster this time, Nigel Edit v1.1: lol, I guess you're right, It's a double win . Furthermore, I just couldn't b.a. to look for a recent guide, I simply made a quick google about guides for hd2-android and this came up, didn't really check it Next time, I'll be faster ..... and use bigger words
Marvlesz said: Have you tried using Google? <<< I'm flaming. Why didn't you look for the Newbies' Guides that are floating everywhere? they will guide you from the moment you pay for your phone till you are welcomed with Android's welcome screen. <<<I'm trying to be nice. Here you go : http://forum.xda-developers.com/showthread.php?t=893948 , from start to finish. <<< I'm being nice. Choose wisely ... EDIT: It always takes more time to write a poem than it does to write an article You were faster this time, Nigel Click to expand... Click to collapse Muahahahaha, I win Also, you linked an outdated guide for the DFT Stock desire build, so I double win (if that's possible)
Thanks guys after more reading and searching i think i should go the nand root. This means i need hspl on it it first and i can only install this if i have spl 1.42.0000. Mine says spl-3.03.0000. It also says installing a stock rom will roll this back. I've installed stock win rom yesterday and it didnt touch the spl. Can i still install hspl with this or do i need it? Is there a list of available roms on this site?
tradvang said: Thanks guys after more reading and searching i think i should go the nand root. This means i need hspl on it it first and i can only install this if i have spl 1.42.0000. Mine says spl-3.03.0000. It also says installing a stock rom will roll this back. I've installed stock win rom yesterday and it didnt touch the spl. Can i still install hspl with this or do i need it? Is there a list of available roms on this site? Click to expand... Click to collapse *sigh* did you read Marvlesz's post about Google? Download HSPL4 and use it to flash HSPL 2.08, no ROM downgrade is necessary. Basically after you've done that it's as simple as flashing MAGLDR, CWM and your ROM (and trust me, all of that won't take you more than 30 minutes at the very most). Marvlesz said: Next time, I'll be faster ..... and use bigger words [/B] Click to expand... Click to collapse Lol, just got that part
Thanks again got the hepl bit done, downloading a rom now got MAGLDIR113 down and ready. Having problem getting phone to sync with vista on pc, it just wont do it. Got it to sync on the laptop ok, any ideas with pc problem? Keep getting rapitool errors.
tradvang said: Thanks again got the hepl bit done, downloading a rom now got MAGLDIR113 down and ready. Having problem getting phone to sync with vista on pc, it just wont do it. Got it to sync on the laptop ok, any ideas with pc problem? Keep getting rapitool errors. Click to expand... Click to collapse Check your device manager did u see mobile device? and is it working? if not try to Reinstall the WMDC driver? I used to have this problem too after i reinstall the driver the phone will be detected again. However if u still can't connect the phone to your PC (it's driver problem, i think). Try task 29 Change to cLK for me it fixed everything. (using HD2 toolkit is easiest way)
Sorry for being a bit dumb here but stuck again. I've downloaded 4 roms- danik supersonic v1.0 lite boxmax.s3.5v8.0.magldr boxmax.s3.5v8.5.magldr boxmax.s3.5.v8.5.haret.sd unzipping the first 3 provide no DAF.exe or install.exe, so stuck there. unzipped the last and copied to sd card and the phone just stalls on the htc quietly brilliant screen. What can i try next?
tradvang said: Sorry for being a bit dumb here but stuck again. I've downloaded 4 roms- danik supersonic v1.0 lite boxmax.s3.5v8.0.magldr boxmax.s3.5v8.5.magldr boxmax.s3.5.v8.5.haret.sd unzipping the first 3 provide no DAF.exe or install.exe, so stuck there. unzipped the last and copied to sd card and the phone just stalls on the htc quietly brilliant screen. What can i try next? Click to expand... Click to collapse Which guide did you follow? The one I posted or the one which Marvlesz posted? Use the one I posted because the one he posted is outdated. You install CWM then flash the ROM as a zip file. I really have no clue how somebody can find it so difficult to follow simple instructions: DOWNLOAD A NAND ROM, NOT AN SD ROM. You've said that you want a NAND ROM and then you try to flash an SD build? At least have some common sense, please. Unless you have a problem which cannot be solved by reading in the future I refuse to give any more help, because it appears to be hopeless
thanks again i've learned alot more tonight, got my first flash done just waiting for it to load. Last question before i leave you alone Is there a way to tell the difference between which mods are CWM and which wont work.
tradvang said: thanks again i've learned alot more tonight, got my first flash done just waiting for it to load. Last question before i leave you alone Is there a way to tell the difference between which mods are CWM and which wont work. Click to expand... Click to collapse Basically all ROMs use CWM, other than the DFT Stock Desire ROM. For everything else, just download the MAGLDR version of the ROM if there is one (many ROMs automate MAGLDR/cLK), change your system partition to the required size and flash the ROM.
hi tried downloading 6 roms now DFT_LEO_NAND_Android BoxmaX.S3.5.v.8.5.Magldr For.user.Nand.v8.x BoxmaX.S3.5.v.8.5.Haret.SD BoxmaX.S3.5.v.8.0.Magldr DFT_LEO_MAGLDR113_DAF Android_2.3.5_Danik_Supersonic_v.1.0_Lite Put all of them on the memory card and it only recogognises the Danik one when i go to choose zip from sd card. When i try to load that it goes through ok till i reboot then it freezes at the HTC screen.
tradvang said: hi tried downloading 6 roms now DFT_LEO_NAND_Android BoxmaX.S3.5.v.8.5.Magldr For.user.Nand.v8.x BoxmaX.S3.5.v.8.5.Haret.SD BoxmaX.S3.5.v.8.0.Magldr DFT_LEO_MAGLDR113_DAF Android_2.3.5_Danik_Supersonic_v.1.0_Lite Put all of them on the memory card and it only recogognises the Danik one when i go to choose zip from sd card. When i try to load that it goes through ok till i reboot then it freezes at the HTC screen. Click to expand... Click to collapse Screw it, I can't help you if you're this f**king stupid.
Cheers nasty c*nt.
tradvang said: Cheers nasty c*nt. Click to expand... Click to collapse Is that how you say thanks to those who were trying to help you ? Follow this : http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7 شبر بـ شبر and you should have Android by the end of its steps. (btw, post reported)
I've said thanks before for his help. Ive asked for the difference between mods and how to differenciate them, i cant work out out why only 1 out of 6 is recognised. And i've downloaded the magdlr versions as suggested. Then he calls me f*cking stupid. Think i have every right to be p*ssed off.
What do you mean by "Difference between mods" ? All mods come in a .zip package that is flashed in CWM. When you download something (any mod, rom, kernel or anything) off the NAND section (this : http://forum.xda-developers.com/forumdisplay.php?f=928 ) it is going to be a flashable CWM. (Unless noted) But when you download something off the SD section ( this: http://forum.xda-developers.com/forumdisplay.php?f=735) it is going to be ... well ... to be put on the sd without flashing. Is this what you are asking for ?
Nigeldg said: Which guide did you follow? The one I posted or the one which Marvlesz posted? Use the one I posted because the one he posted is outdated. You install CWM then flash the ROM as a zip file. I really have no clue how somebody can find it so difficult to follow simple instructions: DOWNLOAD A NAND ROM, NOT AN SD ROM. You've said that you want a NAND ROM and then you try to flash an SD build? At least have some common sense, please. Unless you have a problem which cannot be solved by reading in the future I refuse to give any more help, because it appears to be hopeless Click to expand... Click to collapse tradvang said: I've said thanks before for his help. Ive asked for the difference between mods and how to differenciate them, i cant work out out why only 1 out of 6 is recognised. And i've downloaded the magdlr versions as suggested. Then he calls me f*cking stupid. Think i have every right to be p*ssed off. Click to expand... Click to collapse Sorry, but I have every right to call you stupid too. I even posted DOWNLOAD A NAND ROM, and you go on and download ROMs from the SD section? It's frankly pathetic if you can't do that little reading, and if I were you I wouldn't bother flashing anything in the future. You're lucky you have a pretty much unbrickable device, because if you didn't I'm sure you would be sitting right there with a useless piece of hardware right now.
Thanks Marvlesz, thats got me sorted, the problem was when he said just download the "MAGLDR version", i thought anything with that in the name was the correct one. I'm not here to get into a slanging game so i'll just leave it that. Thanks again.
[Q] help please
Hello guys, im from Holland and I have an htc hd2 with android 2.2 its an good software but i have a lot of problems with it. Problems like , can't make screenshots, out of memory, can't download apps ( not compatible or something). So can anyone help me to get an newer version of android, by easy steps please im not good in things like this. It would really help me !!
thats an old version of android, , the first release concept rom. Advice: install magldr 1.13 (if its not already 1.13) use teh nand toolkit to repartition to teh correct system partiton size - this step also installs cwm choose a new rom, and flash it using cwm.
Do exactly what samsamuel said. For a detailed guide on doing all of that, see the link in my sig.
samsamuel said: thats an old version of android, , the first release concept rom. Advice: install magldr 1.13 (if its not already 1.13) use teh nand toolkit to repartition to teh correct system partiton size - this step also installs cwm choose a new rom, and flash it using cwm. Click to expand... Click to collapse Excellent advice. :good: Updating to the latest version of Android should solve (most of) your issues. Let us know how it works out for you.