Related
Hi you all!
i have got a galaxy note,
i hade the Revo note hd v1 rom before, when there was a upgrade to 2.5 i downloaden with kitchenpro, and istalled the rom, after the reboot, the phone didnt start it only freeze att start.
but i could go to download mode.
now i´m trying to flash with odin 1.85 but it fails after factoryfs.img!!
triyd the latest original N7000_XXKL8,
and tryid N7000XBKK4_N7000OXXKK5_NEE
same problem, what can i do??
please help!!!
Why did you tick Re-Partition?
Before you flash everything (with pit, csc, modem and repartition), you should try to the most basic solution first: Flash stock ROM in PDA only.
download firmware at: http://fus.nanzen.se/
(from Hoffighter's posting) http://forum.xda-developers.com/show....php?t=1350960
Download Check Fus Downloader 2.1, using the Check Fus Downloader, download Firmware N7000XXKL8 (Ibelieve it's for Germany). It will automatically decode the .enc2 file to.zip file
Extract the .zip file generated from decoding file to a folder and you will get
.tar.md 5 file.
open Odin3 1.85, attach the .md5 file to the PDA field on Odin.
(Leave pit, phone, and CSC blank, uncheck re-partition)
Go to download mode and click start on Odin.
If the above steps still fail you, than you can try other things.
but I believe your problem has nothing to do with Modem, pit, or partitioning.
Livewings said:
Why did you tick Re-Partition?
Click to expand...
Click to collapse
hi thnx for the reply,
i have ticked the re-partion because, i downloaded the flash tutorial from sammobile and it says so in the tutorial.
i have tryied with ticked and unticked. its not the first time i flash with odin, so !?
hii.
i have tried one file flash ( N7000XBKK4_N7000OXXKK5_NEE )
its stock rom, and tried the latest stock( N7000_XXKL8 )
and i do flash with odin the way you whrited.
any other ways to try?
Dont use 'Re-Partition'
Just follow link in my signature,(http://forum.xda-developers.com/showthread.php?t=1424997)
and I can see Netchip CWM in ur image, Dont use it, otherwise U will get increased binnary count as well yellow triangle.
Remove all ur file and follow instrauction as i said.(dont messup)
I had the same problem odiin got stuck at factoryfs.img....
Had connected phone through usb hub. ..connected it directly and problem solved
Hope this helps you
Sent from my GT-N7000 using XDA App
dr.ketan said:
Dont use 'Re-Partition'
Just follow link in my signature,(http://forum.xda-developers.com/showthread.php?t=1424997)
and I can see Netchip CWM in ur image, Dont use it, otherwise U will get increased binnary count as well yellow triangle.
Remove all ur file and follow instrauction as i said.(dont messup)
Click to expand...
Click to collapse
ok thnx m8,
should i use any pit files??
i do connect directly to the computer, no hubs!
i´ll try tonight, hopefully with good luck!
thnx
Dont use pit files...
Sent from my GT-N7000 using XDA App
loofee said:
ok thnx m8,
should i use any pit files??
i do connect directly to the computer, no hubs!
i´ll try tonight, hopefully with good luck!
thnx
Click to expand...
Click to collapse
No Dont use pit file, Dont use re-partition
dr.ketan said:
Dont use 'Re-Partition'
Just follow link in my signature,(http://forum.xda-developers.com/showthread.php?t=1424997)
and I can see Netchip CWM in ur image, Dont use it, otherwise U will get increased binnary count as well yellow triangle.
Remove all ur file and follow instrauction as i said.(dont messup)
Click to expand...
Click to collapse
hi i have followd you signature on you link.
downloaded xxkl8, odin, triyed to flash as you say, but stil the same problem.
odin fails to flash after factoryfr.bin
one pictures show when its freeze on like 5% bar.
the second show what it says when i only start the note
It seems you have raised binnary counter already.
It is strange issue, anyway try to factory reset n repeat, Disable, firewall / antivirus if any on your PC.
Also make sure kies is not running in background.
Sent from my GT-N7000 using XDA App
Ok i have solve he problem!
i tried to flash only the csc and phone, and that worked, didnt get any fail, and i could go to recovery.
Yes i have to use the pit-file. downloaded another pit file that whas newer, and that solved all the problem.
So thnx to all that tried to help me, big thnx!!!
hi friends
i have installed rootbox-jb-i9100-v2.9.zip on my samsung s2
i did it via cwm recovery version 6.0.6(i hope the version is correct)
i have kernel-cm-10-20120801-19100-signed.zip and when i try to click on pda in odin i dont see this file
i put the phone on download mode
fire up odin
click pda and then cant see this file..
please suggest
ankscorek said:
hi friends
i have installed rootbox-jb-i9100-v2.9.zip on my samsung s2
i did it via cwm recovery version 6.0.6(i hope the version is correct)
i have kernel-cm-10-20120801-19100-signed.zip and when i try to click on pda in odin i dont see this file
i put the phone on download mode
fire up odin
click pda and then cant see this file..
please suggest
Click to expand...
Click to collapse
Wrong forum. If you want to flash the kernel do it via cwm. Odin does not recognize .zip files.
Sent from my GT-N7100 using Tapatalk 2
ok sorry in case its a wrong forum please give me a pointer
coz i have already done it by putting it onto sdcard and erasing cache data and dalveick partition etc
moreover the yellow triangle is also not dissappearing
ankscorek said:
ok sorry in case its a wrong forum please give me a pointer
coz i have already done it by putting it onto sdcard and erasing cache data and dalveick partition etc
moreover the yellow triangle is also not dissappearing
Click to expand...
Click to collapse
S2??Here ins Note2
sorry guys please move my thread someone
im trying to install stock firmware on bell im using file from sams mobile i337mvlucmk5 unzip file its in tar file i put phone in download mode and try to install file with odin and it fails. now it says odin program failled.ive reinstall the odin program same thing hellllp
ron31 said:
im trying to install stock firmware on bell im using file from sams mobile i337mvlucmk5 unzip file its in tar file i put phone in download mode and try to install file with odin and it fails. Now it says odin program failled.ive reinstall the odin program same thing hellllp
Click to expand...
Click to collapse
what version of odin do you have? And are you placing the .tar in the correct slot? What error message does it give out in that little window it wouldnt happen to fail at [nand (auth) fail!!] would it?
X_DroiD_X said:
what version of odin do you have? And are you placing the .tar in the correct slot? What error message does it give out in that little window it wouldnt happen to fail at [nand (auth) fail!!] would it?
Click to expand...
Click to collapse
im using version 3.07 im placing tar in pda it fails nan write start then fails i have repartion un checked
ron31 said:
im using version 3.07 im placing tar in pda it fails nan write start then fails i have repartion un checked
Click to expand...
Click to collapse
about the odin sayin it fail dont worry about that its based off timer after running for certain time it shuts itself off but as suppose to your file flash smh thats what i was trying to say bu yaks my friend you got yourself a bad signatures tar what exactly is the case here bro? like are your trying to unroot? or whats happening brief me on it like why your trying to reflash stock that way can help you better or least point you in the right direction you can find my contact info on my op faster response time quicker replies
if your phone happens to turn on at all navigate to about device and take a screen shot for capturing model built n baseband and add model number please carrier as well
X_DroiD_X said:
about the odin sayin it fail dont worry about that its based off timer after running for certain time it shuts itself off but as suppose to your file flash smh thats what i was trying to say bu yaks my friend you got yourself a bad signatures tar what exactly is the case here bro? like are your trying to unroot? or whats happening brief me on it like why your trying to reflash stock that way can help you better or least point you in the right direction you can find my contact info on my op faster response time quicker replies
if your phone happens to turn on at all navigate to about device and take a screen shot for capturing model built n baseband and add model number please carrier as well
Click to expand...
Click to collapse
I believe Odin V 3.09 works better. Also it must be flashed in the PDA slot
hednik said:
I believe Odin V 3.09 works better. Also it must be flashed in the PDA slot
Click to expand...
Click to collapse
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
ron31 said:
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
Click to expand...
Click to collapse
So you are using 3.07 and you can put it in download mode ? Are you then able to have the device recognized by odin ? You are then trying to flash the same firmware that came on your phone stock ?
hednik said:
So you are using 3.07 and you can put it in download mode ? Are you then able to have the device recognized by odin ? You are then trying to flash the same firmware that came on your phone stock ?
Click to expand...
Click to collapse
yes odin reconizes phone i downloaded firmware from sams mobile for bell i337m
Based of at&t, t-mbl, bell roger virgin mobile fix mk2/mj9 mdl/mi9 4.3
ron31 said:
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
Click to expand...
Click to collapse
PROCEED AT OWN RISK!!
IF THE ONLY THE DOWNLOAD IS COMING UP BRO NOTHING ELSE YOUR WHOLE FILE SYSTEM IS CORRUPTED AND UR EFS ALL GONE G YOU NEED TO DO A NAND FLASH GET YOURSELF ODIN 3.09V LEME KNO WHEN YOU GOT THAT IN THE MEAN TIME AMA GATHER SOME OF MY PERSONAL FILES FOR YOU INTO A ZIP TO HELP YOU OUT I KNO HOW THAT FEELS WAS IN YOUR SHOES THAN AGAIN EVERYBODY HAS ITS JUS TO BAD HOW SOME OF THE SENIORITY MEMBERS HERE FORGET ABOUT THERE NOOB DAYS LIKE THEY WAS BORN DEVS (NOT THAT AM SAYIN UR A NOOB) these should help you out------>>>>>>>:good:http://https://docs.google.com/open?id=0B1ZauuplxoZsYllTT3Z4YnlWc1k
X_DroiD_X said:
PROCEED AT OWN RISK!!
IF THE ONLY THE DOWNLOAD IS COMING UP BRO NOTHING ELSE YOUR WHOLE FILE SYSTEM IS CORRUPTED AND UR EFS ALL GONE G YOU NEED TO DO A NAND FLASH GET YOURSELF ODIN 3.09V LEME KNO WHEN YOU GOT THAT IN THE MEAN TIME AMA GATHER SOME OF MY PERSONAL FILES FOR YOU INTO A ZIP TO HELP YOU OUT I KNO HOW THAT FEELS WAS IN YOUR SHOES THAN AGAIN EVERYBODY HAS ITS JUS TO BAD HOW SOME OF THE SENIORITY MEMBERS HERE FORGET ABOUT THERE NOOB DAYS LIKE THEY WAS BORN DEVS (NOT THAT AM SAYIN UR A NOOB) these should help you out------>>>>>>>:good:http://https://docs.google.com/open?id=0B1ZauuplxoZsYllTT3Z4YnlWc1k
Click to expand...
Click to collapse
iok thanks bro ill try tonight
ron31 said:
iok thanks bro ill try tonight
Click to expand...
Click to collapse
ok i have odin 3.09 installed i tried to open link you put in post wont open
ron31 said:
ok i have odin 3.09 installed i tried to open link you put in post wont open
Click to expand...
Click to collapse
Did you do a checksum on the file you downloaded? I tried installing a modem on my i337m, same thing odin failed... downloaded the same file from a different source and success... unfortunately there was no md5 number on the file to do a checksum or I would have done that first.... when it comes to stuff like this I alway do checksum if the md5 is provided... (most times it is)
Gage_Hero said:
Did you do a checksum on the file you downloaded? I tried installing a modem on my i337m, same thing odin failed... downloaded the same file from a different source and success... unfortunately there was no md5 number on the file to do a checksum or I would have done that first.... when it comes to stuff like this I alway do checksum if the md5 is provided... (most times it is)
Click to expand...
Click to collapse
no how do you do that
ron31 said:
no how do you do that
Click to expand...
Click to collapse
Download checksum tool from here http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html its free. Then you find the md5 number on the site you downloaded from and use the tool to compare the numbers, typically you navigate to the directory the file is in (this gives you the md5 number, then you copy paste the md5 number from the site, then click the compare button, if they don't match your download is not good and should download again and repeat the checksum.
Gage_Hero said:
Download checksum tool from here http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html its free. Then you find the md5 number on the site you downloaded from and use the tool to compare the numbers, typically you navigate to the directory the file is in (this gives you the md5 number, then you copy paste the md5 number from the site, then click the compare button, if they don't match your download is not good and should download again and repeat the checksum.
Click to expand...
Click to collapse
hey thanks ill give it a try
Hey guys. As title says I'm new to this but my dad bought a used rooted S6 Edge + (G928F) and now it's bricked for whatever reason.
It started off by saying "dm-verity verification failed" and that it's locked in "FRP lock".
I tried using Odin3 v3.10 to reinstall the firmware by downloading it from sammobile and did so successfully.
Here's where the problem part is coming. According from what I've heard and read, it's supposed to be working now. However, it's not, and a new message has appeared saying "Need to check DRK first."
Now, I've tried looking around for how to fix DRK but I haven't found anything that worked.
I'd like to remind you that I'm new to this so newbie-friendly words and patience would be greatly appreciated.
hi alexaziz....its not ur fault u didn't brick the phone...the guy who rooted this phone, he made the phone to show this error....unfortunately only fix is to use some professional tools like z3x box.....but don't b sad u can try 2 things.... just to hide it and bypass it.....
1....install stock firmware....wipe cache ..............download kernel file like 928-FKLSI-ODIN or arter97-g928fcig-.....and try 1 of them with odin (use AP in odin)...it should boot normally if not then try 2nd option..
2......Download official firmware for your device from sammobile. Extract your firmware files from the TAR..... delete cache.img & repack your firmware. now flash the repackaged firmware via ODIN.....thnx
wish u good luck :good:
papu_yaar2004 said:
hi alexaziz....its not ur fault u didn't brick the phone...the guy who rooted this phone, he made the phone to show this error....unfortunately only fix is to use some professional tools like z3x box.....but don't b sad u can try 2 things.... just to hide it and bypass it.....
1....install stock firmware....wipe cache ..............download kernel file like 928-FKLSI-ODIN or arter97-g928fcig-.....and try 1 of them with odin (use AP in odin)...it should boot normally if not then try 2nd option..
2......Download official firmware for your device from sammobile. Extract your firmware files from the TAR..... delete cache.img & repack your firmware. now flash the repackaged firmware via ODIN.....thnx
wish u good luck :good:
Click to expand...
Click to collapse
Hey, thanks for your answer! However, when I try to install the root it just says Blocked by FRP lock. What do i do now?
1-Try to use Smart Switch Emergency Recovery.
if not then download full 4 files firmware and install that with odin...(i hope u know what i m talking about}
Yes new stock update for galaxy J727P new security update number J727PVPU2AQI3 not shore if the original rooting processes are going to work but I'll try it out an let youse know !
Update : yes original root process still works on this build ! But it took two try's to do it .
Warning after updating I can no longer backdate firmware threw Odin ! Can root but can't backdate firmware Fails in Odin ! Bricked my phone trying to backdate does anyone have a copy of the new firmware file only way to fix thay changed the bootloader !
New update was not the bootloader thay changed the modem file ! If anyone has one let me know I could really use it !
im in the same boat please heeeeelllllp There is only one place i found the QI3 downloads on GSM but they want money n a membership etc...... anyone have the firmware please help
XxTeXx07xX said:
im in the same boat please heeeeelllllp There is only one place i found the QI3 downloads on GSM but they want money n a membership etc...... anyone have the firmware please help
Click to expand...
Click to collapse
If you tried to go back to QF5 you can try to flash roo threw odin it should boot after that but your WiFi mite not work an maybe data too ! If that happens you'll need to get flashfire apk download to PC put it on the phone add ap file an csc to the phone storage install flashfire go in to flashfire hit + go to firmware update hit go ap file an hit that uncheck boot img an persist img hit check mark in top right repeat go to csc file hit check mark top if this should work to get WiFi an data up an running if it give you the prompt let update run rooting program if it gets stuck in step up pull battery an restart you phone ! What carrier are you on if your phone came back as sprint reinstall flashfire an flash home csc it brings you back to samsung an it will allow you to asine your carrier just hit yes give it a shot I did an it worked for me I hope it work for you !!
I need the stock odin flashable files as well. I took the ota update, and now its frp locked. I cant downgrade to the QF5 with odin, I keep getting error. Please Help!!!!
QI3 files
https://www.androidfilehost.com/?w=files&flid=238396
Virgin mobile galaxy J727P
RS.85243 said:
https://drive.google.com/drive/folders/0B1i77jA8ZCduRHRCNkx4bEZzNTQ?usp=sharing
Click to expand...
Click to collapse
Mann thank you so much your the best !!