i was following this guide http://forum.xda-developers.com/showthread.php?t=939682 then got up to magldr, tried to open ruu but couldn't so i downloaded advanced ruu. ran task 29. and after the phone rebooted, it gotten stuck on the htc green screen
Of course it does, Task29 deletes everything in your phone. Just flash MAGLDR, CWM and your ROM and you should be good to go.
Sent from my Nexus 4
thanks!
Is it true i can't install android without a sd card?
You can but only very small ROMs and there's not much you can do without an SD card. I'd recommend buying one but if you really don't want to then you'll just have to find a ROM which allows a NAND only install on your HD2 variant. If you have a TMOUS this will be a lot easier than if you have an EU HD2.
Related
I got myself a HD2 the other day, and since i am a androidfan i wanted to get my HD into a droid rom.
This ended in a mobile not wanting to boot, got to the boot screen where i se the android sign and then it reboots. This goes on forever...
HSPL works (have tried different versions) so i can keep trying different roms, but all ends up rebooting the phone. Doesnt matter if i tryWindows 6.5, android or windows7 roms.
But another problem is that i dont know which Rom was my "original" rom, and i formatted the original sd card...
Hope one of you clebver guys have an answer and solution i can try out.
Here are som info that shows in the boot screen now:
R 2.15.50.14
G 15.42.50.50.11U
D 3.14.04666
How did you exactly try go get yourself 'into a Droid ROM'? From SD card or nand? What bootloader do you have? 2.08.Hspl or 2.08.0000? Just go in to Bootloader and flash a custom WinMo ROM or MAGLDR if you want to flash Android from NAND.
Sent from my HTC Vision using XDA App
I have 2.08Hspl bootloader now.
Have tried with Magldr with no luck. Have tried both Sd and Nand version
Still no luck
LordPalo said:
I have 2.08Hspl bootloader now.
Have tried with Magldr with no luck. Have tried both Sd and Nand version
Still no luck
Click to expand...
Click to collapse
I've tried several ROMs & each time they boot up wonderfully, whenever i encounter a problem..its usually cuz i either skipped a required step or didnt fully understand how to get that particular ROM working...So my advice 2 u is to follow the dev's instructions properly in order 2 minimize errors...feel free 2 try d build contained in my sig...With normal usage, i still squeeze out @least 30hrs+ out of my device(calls, msgs, wifi, data, sync, really low back-light, apps, games, etc)
Aaaahh!
Found the solution to my problem.
It was one of the battery contacts that was bent out.
Bent it back into place, and now the phone boots like a Dream
Let the android testing begin
I only suggested that to somebody else today and All! Haha.
Sent from my HTC Vision using XDA App
If you want NAND version, you need hspl 2.08, magldr, and cwm in order to flash rom.
So I tried to install Nandroid on my phone but I realized I needed to put the microsd chip in a card reader in order to upload the nandroid install files on there so I decided to reinstall winmo again.
However I've tried hspl 2.08, hspl 3.08(I think thats the version number) and then reinstalling energy rom with the compatible radios. Once the installation finishes the phone just keeps on rebooting after it shows the numbers on the bottom left of the screen.
Right now I have no idea what to do.
Sorry guys. I figured out that I actually have to shut off my phone and then hold down the volume down button to boot it in to the bootloader and then install the energy rom for it to work correctly.
Check your battery pins to see if one may be bent slightly.
Edit: Just read second second post, so disregaurd my post.
Ok so that was just luck or something.
I got android installed on my device and didn't like that rom so I tried to switch to another one.
1. I went in to magldr and went to AD recovery and just chose the new rom zip and installed it.
2. I didn't like this second rom so I tried to just install another rom using the same method in number 1.
3. The phone just kept on resetting and not booting in to the rom. I used task 29 to wipe out the rom.
4. I installed magldr again and then went in to usb flasher and installed CWM.
5. Phone reboots after CWM install and I go to AD recovery. The phone seems to load CWM. it goes until "go go go" is displayed and then reboots.
6. I tried to install winmo energy rom again but it just keeps rebooting after it shows the energy splash screen.
What can I be doing wrong?
Ok update on what I did so far.
1. I've formatted my SD card thinking it might help but it didn't work.
2. I ran task 29 and installed HSPL 3.03 and installed the stock TMOUS rom and it didn't work. It just got to the splash screen and rebooted.
3. I tried to reinstall energy rom but again it does the same thing as TOMUS rom.
spankerer said:
Ok update on what I did so far.
1. I've formatted my SD card thinking it might help but it didn't work.
2. I ran task 29 and installed HSPL 3.03 and installed the stock TMOUS rom and it didn't work. It just got to the splash screen and rebooted.
3. I tried to reinstall energy rom but again it does the same thing as TOMUS rom.
Click to expand...
Click to collapse
It seems you have done in accordance with the normal procedures
Maybe it was just a bad flashing.
Maybe you want to try flashing Stock ROM but not with HSPL 3.03.
As I know, for Android you need HSPL 2.08.
Cheers...
silverwind said:
It seems you have done in accordance with the normal procedures
Maybe it was just a bad flashing.
Maybe you want to try flashing Stock ROM but not with HSPL 3.03.
As I know, for Android you need HSPL 2.08.
Cheers...
Click to expand...
Click to collapse
Should I flash the stock rom with HSPL 2.08 or just SPL?
edit:
I also forgot to note that the phone only stays on when I plug it in.. I can't unplug it and try to turn the phone on.. it just won't come on.
do task 29 again .... even i had the same prob... install the latest radio thn flash win mob...
hemanbond said:
do task 29 again .... even i had the same prob... install the latest radio thn flash win mob...
Click to expand...
Click to collapse
Damn it.. I tried what you said..
Did task 29, installed latest radio and flashed winmo (energy rom). The damn thing is still restarting.
Ok guys this is really frustrating. I have Android ROM and I want to try WP7 ROM. But every-time I install any ROM I am either stuck on GO GO GO or afterwards I am stuck on white screen with green HTC logo in the middle. I performed task29 before installing anything. I suspect on my SD-Card( I have Kingston 4 GB Class 2), so I borrow another one-Transcend 8 GB Class 6. And again the same problem, WP7 is is stuck on GO GO GO or white screen with HTC logo. What can be the possible explanation here? Anyone?
TnX
it could be a number of things, ive found the best way is to start again. SD flash an original wm6 stock ROM, then install hspl 2.08 > radio 2.15 > magldr 1.13 > os
take you SD card and download SDformatter, format it again
try again.
note that both your cards may not work and if you search you will find all of this info
Tnx mate, but I do the procedure 4 times without success. I still suspect that the problem is with the SD-Cards. Today hopefully I will try with SanDisk 16 Gb class 6. From what I read SanDisk is most used. And if this failed, I will flash stock WinMo 6.5 and reinstall everything again.
TNx
Sent from my HTC HD2 using XDA App
I have the same problem. Flashing complete in 100% but i can't pass the HTC logo when it's booting.
This is not SD fault because I have another device which is running fine...
Did task29, flashed winmo6.5, radio, hspl, magldr 1.13...
One phone simply can run wp7 and another can't ?
Ziaren said:
I have the same problem. Flashing complete in 100% but i can't pass the HTC logo when it's booting.
This is not SD fault because I have another device which is running fine...
Did task29, flashed winmo6.5, radio, hspl, magldr 1.13...
One phone simply can run wp7 and another can't ?
Click to expand...
Click to collapse
dont do the task29
SD flash WM6.5, HSPL, radio, magldr, flash OS
oh i wouldnt go with a class 6, whilst some folk have had working ones many more havent got it working, class 2 or 4 is best, just because its a class 2 doesnt mean its slower than class 6, infact many folk, myself included believe the class 2 and 4 is quicker
Did exacly what u said.
WM6.5 --> HSPL --> radio --> magldr --> flash YukiXDA'a OS
htc logo stuck
As i said i have another hd2 which is running on wp7 for a week... ive done exacly same thing to the both of them and one is not working... Is there something else what i can do?
Ziaren said:
I have the same problem. Flashing complete in 100% but i can't pass the HTC logo when it's booting.
This is not SD fault because I have another device which is running fine...
Did task29, flashed winmo6.5, radio, hspl, magldr 1.13...
One phone simply can run wp7 and another can't ?
Click to expand...
Click to collapse
Hmm, so your saying thatyou have access to 2 HD2s, running/trying to run WP7 and that one of them works with the SD card but the other doesnt work with it?
Ok I forgot to replay that I did it . In my case there was no need for stock ROM. I just:
1. Did task29
2. Installed WinMo ROM (In my case Dutty's V25)
3. Install MAGLDR
4. Install Wp7 ROM...and it works
dazza9075 said:
Hmm, so your saying thatyou have access to 2 HD2s, running/trying to run WP7 and that one of them works with the SD card but the other doesnt work with it?
Click to expand...
Click to collapse
Yep. Im doing EXACLY same thing to the 2 devices. Using the same SD card. First phone is booting and working second is not.
Tried about 5 times (to both of 'em to be sure). I have enough. This just can’t be done. Don’t know why. Maybe there is something wrong with memory? IDK... but this is extremely frustrating.
Ziaren, Do you have 2 SD cards with your 2 HD2s?
Have you tried with both sd cards on your HD2 that has this trouble?
Just a thought.
Good luck
Ziaren said:
Yep. Im doing EXACLY same thing to the 2 devices. Using the same SD card. First phone is booting and working second is not.
Tried about 5 times (to both of 'em to be sure). I have enough. This just can’t be done. Don’t know why. Maybe there is something wrong with memory? IDK... but this is extremely frustrating.
Click to expand...
Click to collapse
Have you tried to flash your stock ROM, then to re-flash everything? (HSPL, WinMo, MAGLDR and WP7)
Dear ALL,I'd like to know which way to install the cm7 rom better.I use magldr to install ,but follow this way there is only same rom can work.Now I use cm7 3.4.0,if I install 3.5.7,the device restart all the time,can't go into the system.TKS
Hi are you trying to run the stock cm7 on HD2? I don't think the cyanogen team has ported cm7 for the HD2 yet... But fortunately a lot of xda guys here have customized cm7 for the HD2. Check out the NAND forums and pick a ROM. Besides cm7 there are also HTC sense/MIUI ROMs available, and many of them are working through Magdlr (as many ppl on these forums can assure you...). Just choose a ROM and follow instructions on that page.
any suggest
likewei92 said:
Hi are you trying to run the stock cm7 on HD2? I don't think the cyanogen team has ported cm7 for the HD2 yet... But fortunately a lot of xda guys here have customized cm7 for the HD2. Check out the NAND forums and pick a ROM. Besides cm7 there are also HTC sense/MIUI ROMs available, and many of them are working through Magdlr (as many ppl on these forums can assure you...). Just choose a ROM and follow instructions on that page.
Click to expand...
Click to collapse
I am following this instruction"http://forum.xda-developers.com/showthread.php?t=933951",But I can't install 3.5.7,whenever I install 3.5.7 rom,the devise retarte again and again.I don't know Why.Can you give me a hand?TKS
Haha I'm using that ROM too. Alright I'm not sure what you did to get Magldr running on your phone, but I suggest you do a total reset... Ok here's how:
1. Flash 2.08.HSPL, get the file follow instructions at http://forum.xda-developers.com/showthread.php?t=611433. Just download HSPL 4 (the latest one) and flash to 2.08.HSPL
2. Flash your radio to 2.15.xxx, if your radio is not already 2.15.xxx. See http://forum.xda-developers.com/showthread.php?t=611787
3. Now download the HD2 NAND toolkit. Technically you don't need this, but it makes things a lot easier. http://forum.xda-developers.com/showthread.php?t=1090783
4. Open the toolkit. Do a wipe (Task 29)
5. Click Install MAGDLR and follow instructions
6. Select MAGLDR Repartition. Use 150mb + 5mb cache. The size of the partition depends on which ROM you're using, but for this particular ROM use the settings I just mentioned.
7. (hmm actually I've nvr really tried this myself because I'm using cLK, so I'm not sure if Clockworkmod recovery is already installed at this point. Just turn on your phone and hold the power button to get into the MAGDLR menu, then select AD recovery. If CMR loads then pls skip this step) Select MAGLDR update recovery and update CMR
8. Alright now you can put the ROM file (a .zip file) into the SD card and use the install zip from sdcard option to flash, then everything should be fine
Hopes this helps
I have successfully installed TyphooN_CM7_v2.9.2-cLK about 8 motnhs ago & been using it but fancied a change.
I am lucky enough to have two HD2's so decide to try installing another nand on the other phone.
I tried TyphooN_CM7_v3.7.0-cLK & DFT_LEO_NAND_Android both using Task 29 & using CWM with CM7 & the USB flasher (as per instructions on the page) for the DFT one. No luck with either they both install but I get an error "Process system is not repsonding" which won't go away with the DFT one & its just keeps booting into Magldr with the CM7. I have installed NexusHD2-Gingerbread_V2.9_NAND_(Android-2.3.5) which is working & installed fine but just can't get either of the other two to work.
I wanted the CM7 to upgrade the current Typhoon I have a wanted a Desire nand on the other phone as a change.
Any ideas what I'm doing wrong?
Help much appreciated
Thanks
Edit:
Following this thread for the CM7 http://forum.xda-developers.com/showthread.php?t=933951
& this for the Desire nand http://forum.xda-developers.com/showthread.php?t=893620
Till now you are used nand android ... so you have the important things (HSPL2.08, radio 2.15.50.14, MAGLDR).
And you installed NexusHD2-Gingerbread ... this means that everything is OK.
I think you can try to download the other things for CM 3.7.0 again.
I've had problems with installing when the .zip is corrupted or something ...
With the typhoon version I would check to make sure that you downloaded the magldr version and not the clk version as it is the magldr that you keep booting into. If you try installing clk to a magldr loader it will not load and just go into magldr loader. With dft one it is probably a bad download or perhaps it is that the rom is an older rom.
There is a lot solutions/problems. Which rom u try to install? Magdlr or clk?
Sent from my HTC HD2 using Tapatalk
Same here
I have exactly the same problem, the only zip NANDs i can install are NexusHD2-Gingerbread. All others install ok but when i reboot it states "Kernal Open Failed" If i install other NANDS via USB flasher they seem to install fine, but then i no longer have AD Recovery Clockworkmod, which is very useful for backups. I appreciate that this is an additional statement but i also have the issue of my phone rebooting 6-10 times a day, hence wanting to change my NAND for testing. I have today however made a complete re-install and using a different SD card, still can't load other ZIP NAND's though.