[ASK[[NEED HELP][Data Connection] - Huawei Ideos X5 U8800

Sir, i've repaired my phone from autoreboot by this way http://forum.xda-developers.com/showthread.php?t=1971266
But after installation done, my phone wasn't detect the HSDPA/HSPA Connection(Before i do install that trick, my phone 3G Are great, but the problem is my phone always restarting every 1-5 min). I've checked 4636 and then i change the connection to JAPAN BAND for get HSDPA Connection, but it never works, still only can use only EDGE Connection. I see my brother phone connection is HSDPA on, but when i change his card to my phone, the HSDPA Connection are can't be use, always no signal. Did u know what was wrong sir? i've re-installed fw froyo-gw-froyo-gb and then no effect was takes. still can only use EDGE Connection :'(

Did you change the IMEI?
This guide replaces the IMEI which was in another phone.

is your phone the normal u8800, or u8800-51, or u8800H? (or u8800pro)

forumber2 said:
Did you change the IMEI?
This guide replaces the IMEI which was in another phone.
Click to expand...
Click to collapse
Oh yea sir my imei are different than imei on my ideos x5 box. how to change the imei sir ?

badiyee said:
is your phone the normal u8800, or u8800-51, or u8800H? (or u8800pro)
Click to expand...
Click to collapse
normal u8800 sir
now i'm using cm7 based froyo (it stored on my hard disk xD)
the internet hsdpa are working but only got max 2 signal bar. and then no connection
so how do i change my imei to normal sir?

VickySullivan said:
normal u8800 sir
now i'm using cm7 based froyo (it stored on my hard disk xD)
the internet hsdpa are working but only got max 2 signal bar. and then no connection
so how do i change my imei to normal sir?
Click to expand...
Click to collapse
i'm tempted to think that you may have a wrong firmware somehow, because for example I have u8800H. It supports HSDPA and HSUPA+. However, when i use u8800 firmware, what happpens is that i lose the ability to switch networks. So i'm only forced to use "select network automatically".
What you can try at this moment is go to google play, download "Elixir 2".
after running it, go to information then click "telephony". Then try to do the APN or the data settings. Try switching it to UMTS/WCDMA only. That may help (more battery used!)
Or, probably the ROM you're using (since you said you're now on official ROM) has lower TX transmit power?

badiyee said:
i'm tempted to think that you may have a wrong firmware somehow, because for example I have u8800H. It supports HSDPA and HSUPA+. However, when i use u8800 firmware, what happpens is that i lose the ability to switch networks. So i'm only forced to use "select network automatically".
What you can try at this moment is go to google play, download "Elixir 2".
after running it, go to information then click "telephony". Then try to do the APN or the data settings. Try switching it to UMTS/WCDMA only. That may help (more battery used!)
Or, probably the ROM you're using (since you said you're now on official ROM) has lower TX transmit power?
Click to expand...
Click to collapse
that app runs like 4636 sir, only change to gsm only, wcdma prefered etc
totally, my phone was can't be fixed the imei
NOW im STUCK IN GINGERBREAD B526 i can't root bcoz my phone ADB are error, i've checked ADB Debug enabled but i dont know whats wrong. my plan is : go to b526 rooted, cwm, then install cm10 maybe the hsdpa signal will work. but there is no more adb debug. Many tutorial i've practice to get back my IMEI Code, but no one was success. Thank you for helping me sir
I will sell my phone to nearby cellular counter, they didn't know anything about android (they only know android is OS can ru
nning chat apps good and android can play angry birds , fruit ninja etc. #LOL) so i can sell with mid-high price
Or i will place my huawei inside my bed room, "THE LEGEND OF MY ANDROID PHONE" hahaha
Or maybe, crush it into the pieces !! woahahaha

VickySullivan said:
that app runs like 4636 sir, only change to gsm only, wcdma prefered etc
totally, my phone was can't be fixed the imei
NOW im STUCK IN GINGERBREAD B526 i can't root bcoz my phone ADB are error, i've checked ADB Debug enabled but i dont know whats wrong. my plan is : go to b526 rooted, cwm, then install cm10 maybe the hsdpa signal will work. but there is no more adb debug. Many tutorial i've practice to get back my IMEI Code, but no one was success. Thank you for helping me sir
I will sell my phone to nearby cellular counter, they didn't know anything about android (they only know android is OS can ru
nning chat apps good and android can play angry birds , fruit ninja etc. #LOL) so i can sell with mid-high price
Or i will place my huawei inside my bed room, "THE LEGEND OF MY ANDROID PHONE" hahaha
Or maybe, crush it into the pieces !! woahahaha
Click to expand...
Click to collapse
use another firmware. B526 has too many issues. the B526 ROM has too many bugs

badiyee said:
use another firmware. B526 has too many issues. the B526 ROM has too many bugs
Click to expand...
Click to collapse
Maybe. now im back on cm7 kernel 32(base froyo) . Still got signal only up 2bar. When try to go to b526 the H signal are lost. Only can use edge connection
I will try to go to B528 as soon as possible
I Think my problem is on IMEI, bcoz after flash the fullflash.bin my imei changed to another phone, needs to change IMEI to stock (FRESH FLASH IMEI, NO ONLY FLASHING THE NUMBER) so i can get the H signal working good again. But i was try using DFS to change, only IMEI number changed and keep hsdpa no working
*UPDATE
After flash directly to B528, It still no signal when go to gingerbread. i must back to froyo and install cm7 again or get another tips to get my H signal working fine again?

VickySullivan said:
Maybe. now im back on cm7 kernel 32(base froyo) . Still got signal only up 2bar. When try to go to b526 the H signal are lost. Only can use edge connection
I will try to go to B528 as soon as possible
I Think my problem is on IMEI, bcoz after flash the fullflash.bin my imei changed to another phone, needs to change IMEI to stock (FRESH FLASH IMEI, NO ONLY FLASHING THE NUMBER) so i can get the H signal working good again. But i was try using DFS to change, only IMEI number changed and keep hsdpa no working
*UPDATE
After flash directly to B528, It still no signal when go to gingerbread. i must back to froyo and install cm7 again or get another tips to get my H signal working fine again?
Click to expand...
Click to collapse
stick to the 528, but i think you may need to reflash your IMEI, I think. But if you do it again chances are it may break down your phone.
How about the APN settings? Is it there?

badiyee said:
stick to the 528, but i think you may need to reflash your IMEI, I think. But if you do it again chances are it may break down your phone.
How about the APN settings? Is it there?
Click to expand...
Click to collapse
I have flash B528, reflash the imei but qualcomm.background passwors are wrong. try to restore imei from my brother phone and imei is 0. setting qualcomm background pass= 0 and it worked. re-flash imei but no luck. still no signal
And im reflash my phone again with linux ubuntu like before. using cm7 32 kernel are better way than breaking hardware (overheated component) of my phone
APN setting are exist
With operator im using "Three" i can get 2 signal bar hsdpa
and "XL" i got up fullbar (but its only appear a few sec -,-) but my phone still usable than before i had problem auto reboot

hi. i have exactly the same problem that you have. i flashed my phone with that fullbackup.bin and updated the phone to b528. i already tried all the GB roms and nothing, can't have cdma(umts) network, only gsm. (edge)
tried to flash my own imei, and have the same problem. no 3g at all
anyone have a workaround for this problem? i managed to take the phone to the warranty, and came equal. (what a lol)
@Blefish
 @forumber
 @forumber2
 @dzo
@coldblue_
 @ezet
 @rqmok
can u pls see something about this?
Thank you

mas solve gak?? punya ku juga problem d network nya ni..
tapi imei sama mac addr cocok. ma yang di boks..

Related

No data connection after rooting to custom rom (Darky's v5.6)

I'm new to flashing custom roms and what not. I used odin and flashed everything to the point, csc, modem,pda,pit the rom works awesome but i cannot for the life of me connect to the internet. the 3g icon or h icon wont' show up. in the status it says my network type is gprs and i'm roaming and my mobile network state is disconnected.
I'm with fido, the phone is unlocked i have never had trouble with data or anything until i flashed to a custom rom.
Anyone have the same problem or suggest how to fix?
Data Conn. Issue
Hey mate,
Have you gone into 'Settings', 'Wireless and Networks', 'Mobile Networks' and then 'APN settings' and entered your appropriate settings?
That should fix it if you define the correct access point.
Alex
hey man, yeah i did all that stuff, went in there, found my carrier, put in all the apn settings i can find and still nothing. when i put data roaming on then i get data and the edge icon comes up.
Hey dude,
That sounds strange, flashing custom (or even release) roms is never a guarantee especially with weaknesses in the way that ODIN communicates with your phone, What I would do is Re-Flash your stock rom through ODIN then use the "quick" install method from Darkyy.
I am running 5.6 like you, and I had issues doing it through odin (I kept getting random FC's), additionally, the rom; if installed from CWM will keep your apns and apps e.t.c. along with many settings and configs from the base rom you're using before the flash.
That is the best advice I can give you.
Alex
My config is a follows:
I9000 International
16gb SDHC
500HZ Hardcore Kernel
Darkyy 5.6
Whats the process for reverting back to stock 2.1 eclair rom?
Did you keep a record of your firmware version before reflashing?
If not, you may have to ask someone on here what your base firmware was.
Are you familiar with using ODIN? (The software used for reflashing)
Alex
I am having same issue to...I used 5.4 from Darky and it works well...same with DocRom 4.0 works and the next 5.1/6.0 don't work.
Both Darkys and DocRom are based some JPX....which seem to be root cause..
I've have the same problem. Tried eveything but still didn't work. So went to Samsung Service Centre to have my SGS firmware refresh. I notice after the refreshed same issue of data com missing. Told them and they when into the SGS to select the telco operator setting selection. Now data com. working well. Anyone know the SGS handset setting code? I want to reload to Darky's v5.6 again.
hi folks
i have the same problem... my provider is a virtual provider in the network of our biggest provider here in austria. i was using doc's rom based on xwjpa firmeware and everything worked fine without enabled roaming options.
since doc's rom is based on the newer releases (xxjpx, xxjpy) i' only able to use data connection if i turn on roaming. it also shows me that i'm in a roaming network. i guess the cause are the xx firmwares. xw and xx are european firmwares but i do not know the differences between them. maybe someone has more information about the differences? currently i'm using xwjpa firmware because i don't want to use my phone with enabled roaming options.
hey um i'm having the same problem and thought replying here would be better than starting a new thread.
well i installed the rom without having any idea of what i was doing *stupid idea* so i didn't take note of my original firmware.
i didn't use odin to install the rom just clockwork recovery and the rom and everything installed fine except my data network. i can get signal, call, receive the only problem is i get no data transfer. any help much appreciated. if anything can someone help me step by step to reboot my phone to original?
just for future travellers
Sadly this isn't my own gem, but yeah. hold the power button down, wait for the shutdown menu, above the airplane mode there is a data network button, and it'll most likely say "de-activated" if nothing else has worked. Its ok to feel like a chump, I did after rehashing the hell out of this phone for a few days ( the wifes phone, my phone does exactly what its told. )
Anyway, yeah, this will probably be the reason for the lack of the icon "G", "3G" or "H" where it should be.
Dave.

Mobile network not available

Hey, last night I managed to install cyanogenmod 7.1 on my GT-I9000M. The purpose of this was to root the phone, so that I could SIM unlock it. I ran the free unlocker app by helroz, and it didn't make any complaints, so assume it worked.
As you'd know, the GT-I9000M variant is from Canada, but I live in Australia (Bought it off a friend). I tried putting my SIM card into it, and it does tell me my carrier (Telstra), but the reception bars remain greyed out, with a little x up the top.
When I try make voice calls, it says "Mobile network not available".
Does this mean the phone is still SIM locked, or could I be doing something else wrong? Is there a way to check if it's still SIM locked?
I have taken a few screenshots that may help:
dl.dropbox.com/u/203420/sscreenshot1.png
dl.dropbox.com/u/203420/sscreenshot2.png
dl.dropbox.com/u/203420/sscreenshot3.png
Regards,
Dan
You need to flash KG3 modem.
Here's the link to the post by [Ramad] with modem for i9000m.
lpfthings said:
Hey, last night I managed to install cyanogenmod 7.1 on my GT-I9000M. The purpose of this was to root the phone, so that I could SIM unlock it. I ran the free unlocker app by helroz, and it didn't make any complaints, so assume it worked.
As you'd know, the GT-I9000M variant is from Canada, but I live in Australia (Bought it off a friend). I tried putting my SIM card into it, and it does tell me my carrier (Telstra), but the reception bars remain greyed out, with a little x up the top.
When I try make voice calls, it says "Mobile network not available".
Does this mean the phone is still SIM locked, or could I be doing something else wrong? Is there a way to check if it's still SIM locked?
Regards,
Dan
Click to expand...
Click to collapse
Hi, thanks for the reply
I'm trying to do that now, through Odin. I put the .tar.md5 file into Phone, and went to flash it, but it failed. It seems odd that the file has 2 extensions, is there something i need to do to it first? (Most modem files I've seen have been .bin files?)
EDIT: Nevermind, managed to get it to flash. However, now the phone won't pick up my carrier at all, and baseband version is Unknown?
Regards,
Dan
Maybe try to flash it in recovery mode?
Here's one for CWM.
View attachment Modem_KG3.zip
*ignore this post*
Bell i9000m by default is 850 or 1900mhz , try to change it to 900 or 1800.
Dial *#2263# and in GSM menu choose either of em.
Dialing *#2263# doesn't seem to do anything
I've installed the new modem you linked me, it still says "Telstra", however still no reception apparently (I know I do get reception in this room, and the baseband version seems to be the same)
Regards,
Dan
Same thing happened to me I had used the wrong version of cwm to install the rom. All I did is reinstall with the cwm that the rom had installed itself and everything worked fine .
Sent from my GT-I9000 using XDA Premium App
I just tried reinstalling cyanogenmod from it's own CWM, but still have the same issue.
Just looking at the phone now, it seems the signal strength is always on -111dBm and 1asu, doesn't change.
Regards,
Dan
lpfthings said:
I just tried reinstalling cyanogenmod from it's own CWM, but still have the same issue.
Just looking at the phone now, it seems the signal strength is always on -111dBm and 1asu, doesn't change.
Regards,
Dan
Click to expand...
Click to collapse
Sorry the sane fix didnt work for you .I moved to darkysrom myself because of so many missing features in cyanogennod like the tv out feature.
Sent from my GT-I9000 using XDA Premium App
Yea, I'm wondering whether the radio hardware itself might be broken. It always shows no service with this SIM, no matter which modem version I use, which firmware etc. Signal strength always shows -111dBm 1asu and that's about it.
Flash a GB firmware with pit and repartition, I think that you need to do that when flashing back from CM firmwares, then see if the device functions properly.
Check if the IMEI-number is not changed, if it's not changed and the device still can't detect the SIM-card then try executing on Terminal Manager (from Market) or using ADB (su and busybox must be installed on your device):
su
busybox chown 1001:1001 /efs/nv_data.bin
reboot
Click to expand...
Click to collapse
Click to expand...
Click to collapse
If the device detects the SIM-card but the device gets no reception then flash a modem that supports a different band, UGKG3 for I9000M supports 850MHz and the modems for I9000 supports 900MHz out of the box.
The idea is to try to narrow the problem down to 1 point, you need to know which modem you need and you also need to know that your device is not defect, doing that using CM is not the proper way, use stock firmware to avoid possible bugs in CM, and you don't need to flash to Froyo in order to flash CM, you can do it from GB by flashing a Kernel with CWM support and you are good to go.
Good luck
Hi, thanks for the detailed reply.
I've just flashed back to the stock GB 2.3.3 firmware, however I'm having trouble figuring out how to install su?
With the stock firmware, it doesn't even tell me my carrier anymore, and just says "No service".
Regards,
Dan

GT-i9505 No mobile network/data after flashing custom ROM

Hi guys been searching all day when I can grab some free WiFi, basically I rooted my s4 gti9505 with auto root and then installed custom recovery, and flashed PAC rom. I'm unable to make calls or receive mobile data but can use WiFi. My settings say baseband unknown .. I'll attach a picture of my settings here in this thread. I have attempted to flash a modem/radio in Odin but this didn't seem to make any difference, the problem is I'm not sure if it was the right thing to do (didn't make a back up of my phone foolishly before flashing PAC rom)
I'd appreciate any help with this guys! My network is vodaphone UK if that makes any difference to any advice given...
Thanks in advance!
Sent from my GT-I9505 using xda app-developers app
somepepe**** said:
Hi guys been searching all day when I can grab some free WiFi, basically I rooted my s4 gti9505 with auto root and then installed custom recovery, and flashed PAC rom. I'm unable to make calls or receive mobile data but can use WiFi. My settings say baseband unknown .. I'll attach a picture of my settings here in this thread. I have attempted to flash a modem/radio in Odin but this didn't seem to make any difference, the problem is I'm not sure if it was the right thing to do (didn't make a back up of my phone foolishly before flashing PAC rom)
I'd appreciate any help with this guys! My network is vodaphone UK if that makes any difference to any advice given...
Thanks in advance!
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
flash MGA modem twice with odin (first time do not tick "auto-reboot", when it "pass" remove battery, insert it flash second time)
This things happend when people move from old baseband to new baseband
samersh72 said:
flash MGA modem twice with odin (first time do not tick "auto-reboot", when it "pass" remove battery, insert it flash second time)
This things happend when people move from old baseband to new baseband
Click to expand...
Click to collapse
hi thanks for your reply, i have just flashed the MGG modem trying to fix it myself but when i reboot myself manually it just hangs on the samsung boot logo for ten minutes..i will try your method with the MGA modem and hope it works
thanks
somepepe**** said:
hi thanks for your reply, i have just flashed the MGG modem trying to fix it myself but when i reboot myself manually it just hangs on the samsung boot logo for ten minutes..i will try your method with the MGA modem and hope it works
thanks
Click to expand...
Click to collapse
and reflash the custom rom after flashing the modem
samersh72 said:
and reflash the custom rom after flashing the modem
Click to expand...
Click to collapse
will do this too, have just finished flashing MGA modem twice using your steps, will flash rom again..i wonder if i should wipe/factory wipe as i would when installing new rom...ill try it!
no luck -still no network. im running out of ideas
network - unknown
mobile network type - unknown
imei unknown
imei sv - unknown
going out now for a while but thought id ask - do you think that installing official stock rom (perhaps from your s4 unrooting guide) would help flashed via odin? from searching i can see that some folk suggest that stock will reinstall everything i need...im hoping so, i really wouldnt mind going back to stock, anythings better than this
somepepe**** said:
will do this too, have just finished flashing MGA modem twice using your steps, will flash rom again..i wonder if i should wipe/factory wipe as i would when installing new rom...ill try it!
no luck -still no network. im running out of ideas
network - unknown
mobile network type - unknown
imei unknown
imei sv - unknown
Click to expand...
Click to collapse
did you put modem in "phone" in odin?
hmmm weird! i guess your imei is not corrupted, sometimes while flashing rom in cwm, efs partition is not detected, so flashing modem twice should work
you can try with an other modem, use new one (but im sure to flash it twice)
another option is trying to flash your stock firmware
samersh72 said:
did you put modem in "phone" in odin?
hmmm weird! i guess your imei is not corrupted, sometimes while flashing rom in cwm, efs partition is not detected, so flashing modem twice should work
you can try with an other modem, use new one (but im sure to flash it twice)
another option is trying to flash your stock firmware
Click to expand...
Click to collapse
yes put it in "phone" mode, thats the second or third one i have flashed now so im not sure it wont help but for sure ill try again!
are you able to determine that its not corrupted? would it state as such if it were? im going to flash a stock firmware as a last resort. lost after that haha
edit - installed cwm using sgs4 flasher and re-installed my custom rom and gapps, booted no probs and network now working - sorted!! thanks for your help i dont think i would have reflashed the rom without your advice to do so
So I'm practically in the same boat. I'm currently on P.A.C. man nightly 09/18 (Vodafone Germany branded device). I never had similar problems, but now I can't call (or be called) and I'm not able to use mobile data.
I nearly tried everything:
1) I checked the IMEI (saved it before switching over to custom roms), but an IMEI number is still there.
2) Went back to stock to see if it's a problem of P.A.C. man ROMS or not. On stock it didn't work either.
3) Went back to P.A.C. man ROM and flashed modem XXUBMF8 via Odin 3.04 (from this thread: http://forum.xda-developers.com/showthread.php?t=2192025)
4) Flashed the modem again after I flashed the ROM because it didn't work either.
So I'm completely lost now, I really don't know what to do next. I had mobile data for a couple of seconds every now and then, but nothing stable. And since the problem came up (yesterday evening) I can not make any calls at all.
Can someone help me?
Edit: The very strange thing is that I have full reception balks in the notification area (only in grey). But still, I guess this means that the device is somehow able to detect a signal but can not connect to it?
Edit2: I apparently have no Device-ID. May that be a problem?
So I took some screenshots to show you guys my problem a bit better. For some reason my mobile data now works (currently HSPA, but it's extremely slow). But I still can't make any calls (or get called too). =/
Edit: So to sum this up: the strangest thing about this problem is, that even when I go back to full stock I can't make calls. =/ What could be the problem? An IMEI number is present in the settings (althouh the 'IMEI SV' under 'About phone' --> 'Status' was one digit below the current one that I can see under those stats). The whole problem makes me believe that my provider can't sort my phone number to my device (I'm on Vodafone; but if that's really the case: why the hell does mobile data works sometimes?!). The other possibility: something with the modem/radio is broken. Could this be the problem? The thing is that I also tried to flash a custom modem, but the problem is still there...
I'm really concerned that my phone just became an expensive paperweight
Slightly different than my problem in that I didn't even have any bars for reception..my problem was fixed by changing the custom recovery software (originally I used philz to flash PAC), But I flashed cwm and then used this to again flash PAC, and all was good..don't ask my why but it helped me so you might want to try this...
Sent from my GT-I9505 using xda app-developers app
somepepe**** said:
Slightly different than my problem in that I didn't even have any bars for reception..my problem was fixed by changing the custom recovery software (originally I used philz to flash PAC), But I flashed cwm and then used this to again flash PAC, and all was good..don't ask my why but it helped me so you might want to try this...
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thank you for your answer!
You also flashed a different modem didn't you? Did this help or was it only the custom recovery? I'm confused because I used CWM before and never had problems. But then this mess all came up...
Yes I flashed several modems, that didn't help..only using a different custom recovery to flash my custom Rom again helped..hope you get sorted!
Sent from my GT-I9505 using xda app-developers app
So I tried to flash PAC with TWRP 2.6.0 (it worked before), but the problem is still there.
I'm really confused. I really don't know what I can do or try to fix this mess... Is there some USSD code or something to find out if my device is missing some ID codes or if the modem is messed up or something?
Edit:
Update: For some reason I now can receive calls/SMS but only when I'm on GPRS speed. Outgoing and ingoing calls are no problem then. When my device is on HSPA or HSPA+ speed however, the old problem of not being able to call or be called is back. On one hand it's good that I'm somehow able to make calls again on the other hand it gets stranger and stranger. I know that it's a bug on PAC man ROMs that you can't change the mobile data speed options (LTE/HSPA/GPRS etc.), but I think that this could be the problem (or at least a part of it)...
Gotcher said:
So I tried to flash PAC with TWRP 2.6.0 (it worked before), but the problem is still there.
I'm really confused. I really don't know what I can do or try to fix this mess... Is there some USSD code or something to find out if my device is missing some ID codes or if the modem is messed up or something?
Edit:
Update: For some reason I now can receive calls/SMS but only when I'm on GPRS speed. Outgoing and ingoing calls are no problem then. When my device is on HSPA or HSPA+ speed however, the old problem of not being able to call or be called is back. On one hand it's good that I'm somehow able to make calls again on the other hand it gets stranger and stranger. I know that it's a bug on PAC man ROMs that you can't change the mobile data speed options (LTE/HSPA/GPRS etc.), but I think that this could be the problem (or at least a part of it)...
Click to expand...
Click to collapse
Actually I can change the data in my phone between 3G and 2G (don't have LTE support here in my country)
Have you checked your APN? Think that might be a problem.
Also please post the steps you take before flashing PAC (ROM, kernel, recovery, etc)
soyusado said:
Actually I can change the data in my phone between 3G and 2G (don't have LTE support here in my country)
Have you checked your APN? Think that might be a problem.
Also please post the steps you take before flashing PAC (ROM, kernel, recovery, etc)
Click to expand...
Click to collapse
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Install stock ROM
Gotcher said:
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Click to expand...
Click to collapse
Mate you should try installing Stock ROM that might help I think !
.::Alien::. said:
Mate you should try installing Stock ROM that might help I think !
Click to expand...
Click to collapse
I tried that already, but it didn't help. Same problem...
I factory resetted the phone, wiped cache and dalvik cache and then flashed my Vodafone branded stock ROM via Odin that I had on my device when I got it. Didn't help for some reason... But: should I also try to go back to stock ROM via KIES? I haven't tried this method until now...
Edit: About my flashing method: I went from the stock ROM to rooted (via CF Auto root with Odin). For PAC I then flashed TWRP 2.6.0 and then in recovery factory resetted the phone, wiped cache and dalvik and then installed PAC. After that I installed GApps. I used this method before and it worked without any problems...
Edit2: I found this thread, it appears to be the same/a similar problem with the S3: http://forum.xda-developers.com/showthread.php?t=1805709&page=6
Now is there something similar for the S4? I think I tried calling ##72786# on stock ROM and it didn't work...
Gotcher said:
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Click to expand...
Click to collapse
Delete the unused APNs.
Do you have mobile data?
Also I asume that you're running the latest vertigo's build, because with me GSM/WCDMA/LTE is always selected.
Sent from my GT-I9505 using Tapatalk 4
Sometimes I have mobile data, but only for very limited time; for the majority of time, I don't have mobile data and can not make calls.
I also tried to delete the unused APNs, but still no change =/
I tried to use a different Micro SIM in this device, but the same problem appears. No data, no phone although I have grey reception balks.
any update on this one?!

Signal lost: Mobile network type UNKNOWN:0

Hi guys I have a nexus 4 but one time I can't receive any signal network... The phone recognize the sim and the imei correctly but not tha signal
I've tryed to use my sim in onother phone and it works. This morning it's working fine I don't know way now not.
I've restored to stock firmware using many tools but none of them solved the problem
Any suggest?
eugenioxx said:
Hi guys I have a nexus 4 but one time I can't receive any signal network... The phone recognize the sim and the imei correctly but not tha signal
I've tryed to use my sim in onother phone and it works. This morning it's working fine I don't know way now not.
I've restored to stock firmware using many tools but none of them solved the problem
Any suggest?
Click to expand...
Click to collapse
Using KK baseband on JB Rom maybe ?
Marsou77 said:
Using KK baseband on JB Rom maybe ?
Click to expand...
Click to collapse
I was using the kk baseband but the screenes show the old 4.2.2 baseband becouse I have tryed to reset to stock the phone and so I come back to 4.2.2. android version with the baseband .48
I have fullwipe all the phone becouse factory reset of official update of google deleted evrything but signal is impossible to be find by the phone wich recognize the sim and the number but not the signal
If I open btw the case and try to remove and reinsert correctly the antenna the phone will recognize the signal?
coz it apper a hardware proble I think....
eugenioxx said:
If I open btw the case and try to remove and reinsert correctly the antenna the phone will recognize the signal?
coz it apper a hardware proble I think....
Click to expand...
Click to collapse
Have you tried to use the tool kit all in one (AIO) to bring the phone back to its original stock? If you have not, why don't you give it a try to see if that helps.
taodan said:
Have you tried to use the tool kit all in one (AIO) to bring the phone back to its original stock? If you have not, why don't you give it a try to see if that helps.
Click to expand...
Click to collapse
Yea I've tryed this tool too but no signal and remain the 0 dBM in setting...

[Q] i9505 cannot register on network

Ok so here's my problem.
I have an I9505 previously with a GE custom ROM and modem version XXUEML2, everything was working fine so far, the only "strange" thing was whenever I reboot the device the Cell Network will take about 3 minutes to reconnect, and I constantly lost the 4g connection which I attributed to problems within my carrier.
So a couple days ago I re-installed my custom ROM (was having problems with the Kernel) and after it boot back I wait to my Cell Network to connect, which never happen. So I went ahead, format everything, re-install the custom ROM and no luck.
I tried everything, updating the Baseband to XXUEML6. Install the Stock ROM (which was locked, but the store where I get it unlocked it by warranty), install another Stock ROM (right now I have the I9505XXUFNC4_I9505PHNFNC1_PHN ROM) and I still cannot get signal).
Did my modem just died, or the "warranty" guys unlock my device in a wrong method. I don't think is a problem with my IMEI 'cause I still have the same as the dive box says.
Hope someone can guide me before I take it back. Thanks.
vicmns said:
Ok so here's my problem.
I have an I9505 previously with a GE custom ROM and modem version XXUEML2, everything was working fine so far, the only "strange" thing was whenever I reboot the device the Cell Network will take about 3 minutes to reconnect, and I constantly lost the 4g connection which I attributed to problems within my carrier.
So a couple days ago I re-installed my custom ROM (was having problems with the Kernel) and after it boot back I wait to my Cell Network to connect, which never happen. So I went ahead, format everything, re-install the custom ROM and no luck.
I tried everything, updating the Baseband to XXUEML6. Install the Stock ROM (which was locked, but the store where I get it unlocked it by warranty), install another Stock ROM (right now I have the I9505XXUFNC4_I9505PHNFNC1_PHN ROM) and I still cannot get signal).
Did my modem just died, or the "warranty" guys unlock my device in a wrong method. I don't think is a problem with my IMEI 'cause I still have the same as the dive box says.
Hope someone can guide me before I take it back. Thanks.
Click to expand...
Click to collapse
Hi .
I guess that you checked your setting , data is enable , network mode.....and if your APN settings were correct
MAX 404 said:
Hi .
I guess that you checked your setting , data is enable , network mode.....and if your APN settings were correct
Click to expand...
Click to collapse
Yeah, already check that, but the problem is that I cannot even make phone calls.
vicmns said:
Yeah, already check that, but the problem is that I cannot even make phone calls.
Click to expand...
Click to collapse
I am a little lost with the unlocking thing, why you had to unlock your phone ? it was from a different carrier ? once is unlocked it remains unlocked ..what method he used ?
MAX 404 said:
I am a little lost with the unlocking thing, why you had to unlock your phone ? it was from a different carrier ? once is unlocked it remains unlocked ..what method he used ?
Click to expand...
Click to collapse
Well, when I bought the device, it was intended to be unlocked, but for a strange reason my device (only mine 'cause we bought 2 the same day) came carrier locked (MEO from Portugal) So I sent it back to warranty. After a week I get my device back "unlocked" (Same ROM, IMEI) but I notice that it was rooted, which only makes me think that they take it to a third party which unlocked the cellphone with a method that required root. I didn't care, I had signal and 3G,
The problems of buying stuff online...
vicmns said:
Well, when I bought the device, it was intended to be unlocked, but for a strange reason my device (only mine 'cause we bought 2 the same day) came carrier locked (MEO from Portugal) So I sent it back to warranty. After a week I get my device back "unlocked" (Same ROM, IMEI) but I notice that it was rooted, which only makes me think that they take it to a third party which unlocked the cellphone with a method that required root. I didn't care, I had signal and 3G,
The problems of buying stuff online...
Click to expand...
Click to collapse
There use to be possible using this guide, with the old firmwares as far as i know is not possible anymore unless you still have that firmware
http://forum.xda-developers.com/showthread.php?t=2282683
The other way is by an unlocking code ( you can buy in many places) once is unlock , stays unlock..no matter what you flash
Try something go Settings/connections / More networks/Mobile networks/ network Operator/ choose your carrier and see if it let you register, try others and see what kind of message you get
MAX 404 said:
There use to be possible using this guide, with the old firmwares as far as i know is not possible anymore unless you still have that firmware
http://forum.xda-developers.com/showthread.php?t=2282683
The other way is by an unlocking code ( you can buy in many places) once is unlock , stays unlock..no matter what you flash
Try something go Settings/connections / More networks/Mobile networks/ network Operator/ choose your carrier and see if it let you register, try others and see what kind of message you get
Click to expand...
Click to collapse
Already tried to choose my carrier, but sometimes it doesn't even appear, and when it does, connecting to it just throws and error saying "Not Registered On Network".
What I fear is that somehow they unlocked it using the Ariza patch (or other unlock method) which should not be used.
Also after digging some info, that kind of error happens when the device have been IMEI locked, which could be also a possibility given that my SIM works on any other device, but not otherwise. I will have to give a call to support service to discard this theory.
vicmns said:
Already tried to choose my carrier, but sometimes it doesn't even appear, and when it does, connecting to it just throws and error saying "Not Registered On Network".
What I fear is that somehow they unlocked it using the Ariza patch (or other unlock method) which should not be used.
Also after digging some info, that kind of error happens when the device have been IMEI locked, which could be also a possibility given that my SIM works on any other device, but not otherwise. I will have to give a call to support service to discard this theory.
Click to expand...
Click to collapse
Hi ,
I also feel the same that is the problem , it has not been unlock right.
check with them , let me know what they tell you.
Ok, I have more information, typing on the dial *#0011# to get the Service Mode Menu, it says at the bottom IMEI CERTI: NA. But if y dial *#06# I get my correct IMEI, is something wrong with the EFS folder?
vicmns said:
Ok, I have more information, typing on the dial *#0011# to get the Service Mode Menu, it says at the bottom IMEI CERTI: NA. But if y dial *#06# I get my correct IMEI, is something wrong with the EFS folder?
Click to expand...
Click to collapse
Hi ,
Just cheked mine , it said PASS
For sure something happen when unblocking the phone

Categories

Resources