Related
Current Situation:
When I say bricked, I mean BRICKED in all caps. The phone is completely unresponsive. If I try to turn it on – no good. If I try to put it in bootloader mode – no response. If I hold the volume button down and depress the power – no menu displays. I get no ‘M’. I get nothing. Except…
If I fire up RSD Lite 4.9 and plug in the phone, it does recognize something. Under model it displays “S Flash OMAP3630”. If I load up an sbf file (I’ve been following Higgsy’s incomparable “How To” guide - http://forum.xda-developers.com/showthread.php?t=853674 and using the generic UK sbf file he recommends) and depress “Start” within RSD Lite, the phone will display “SW Update In progress…” in white blocky text. RSD Lite says it’s executing and, after several minutes will display a Status of “Finished” and a Result of “PASS”. On the phone, the screen goes dark but a white notification light displays. While the phone is still plugged in, I can depress the power button on and off and RSD Lite will recognize it’s there (if it’s on) or not recognize the phone is there (if the power is toggled off).
Note that the battery is fully charged.
I’ll give you a little background info:
Background:
I purchased Defy phones for my wife and me for Christmas. Her’s is working fine, is unrooted, and has only a few apps beyond stock (Angry Birds of course!). But of course I had to play with mine. All went well until I (stupidly) installed the latest T-Mobile update which removed my root access. This was not acceptable to me as I had overclocked my phone for performance purposes. I had a really hard time getting root access back until I at last found a version of SuperOneClick that did the trick.
By this time I had reset the phone back to factory settings. So I thought “Well, I might as well flash some cool ROM”, so I flashed a Gingerbread themed Froyo cooked up for the Defy. Unfortunately, it didn’t work (for whatever reason). I was stuck at the dreaded ‘M’.
Next I started following Higgsy’s guide (as mentioned above) but I guess I screwed something up because now the phone is totally unresponsive except as detailed above.
So where do I go from here? Some possibilities:
Flash T-Mobile 2.2 test sbf?
Link?
Flash Original SBF?
Link?
I’ve still got my wife’s phone which is working perfectly fine. Is there a way to copy files from her phone to my dead phone and get some life?
Do you guys have some other steps you’d recommend?
I’d really like to get my phone working again and would much appreciate the help. Many thanks in advance.
(Note that I’m a Noob so please don’t assume I know anything!)
(Yet another note: I'm in the USA.)
Which .sbf's and in which order did you install them?
The same happened to me after I'd flashed the 3.4.2 sbf, then tried to downgrade back to 2.34. it went blank and I had to reflash 3.4.2 again.
If you've flashed 2.51 or 3.42 then you can't downgrade from them. So the fix would be to flash the same rom again.
I have the same problem and this how i fix it
1.http://forum.xda-developers.com/showthread.php?t=892026&highlight=low+battery your phone will show in rsd lite
2.flash http://forum.xda-developers.com/showthread.php?t=933555 with him you get a error that can not be installed
3. disconnect phone from USB and remove the battery
4. Replace the battery in the phone and power up, and phone immediately go into the bootloader
5. Flash bootonly http://forum.xda-developers.com/showthread.php?t=899450
6. and finaly flash http://forum.xda-developers.com/showthread.php?t=922430
it works for me
sorry for bad english
Solved
I flashed http://forum.xda-developers.com/showthread.php?t=922430 per your suggestion and I'm now up and running. Thank you.
Motorola Defy bricked
hi
i have a question about my defy. The white led is still shining but there is no connection to the pc. I connected via USB-cable.
pls HELP!!!!!
I have a similar issue as the OP..
I originally rooted the phone using simpleoneclick... then I overclocked it using setvsel...
it was running fine for an hour or so, and then I ran quadrant (several times over the course of the hour) and the final time, it rebooted during the middle of a test, and then it would just keep looping the bootup moto logo and "android" screens.
at that point I could still enter the bootloader and recovery screens. I tried wiping data and resetting to factory defaults with no avail.
Finally I followed a thread on flashing a new rom to the phone with RDSLite and the uk rom. After getting it to finish flashing and it showing a 'Finished' and 'PASS' status as the OP mentioned, te phone now no longer responds. Power button does not trigger the screen to go on, regardless of if I try to press the volume buttons with it or not.
The only response I get from it is when it is connected to the computer, the white led turns on, and the computer (and rdslite) recognizes it. I can still flash it with rdslite and the screen turns on displaying the SW update In progress message...
but that's about all I can get it to do.
Any help and advice would be greatly appreciated
edit: I should also mention that after the uk 2.21 rom I've also tried the china 2.2.1 roms.... Should I also try flashing the 2.51 uk version as well?
Okay, I tried a few more roms and this one "JRDNEM_U3_3.4.2_117-00..." has everything back up and running...
however now i'm running into the issue of apps that i've 'downloaded' not actually installing...
bricked
same problem here. rsd can detect my phone but still failed flashing. i changed and renamed the /sbf but still doesnt work... please help
MB525 Defy Bricked
MB525 Defy bricked and rsd cannt detect my phone failed . ... please help
its dead. Actually i uninstalled busybox and in this process all the system files also deleted by busybox. now phone is not starting. if anyone can suggest. I was using MIUI rom. can any one make it alive again.
[email protected]
. ....please help
Same problem here, but my phone is only detected by a friend's laptop. I think I have to flash Defy+ rom
try to flash sbf use rsd
If your phone is detected by RSD Lite, then you have an easy fix in just flashing a new sbf. If it's not detected and you can't charge your battery, you're going to have to use the MacGyver method.
if sbf doesnt work u better send it to warranty
Well. On my computer the phone isn"t even recognized. Maybe because some RSD Lite files are missing and it need them to detect bricked defy (i did reinstalled RSD Lite)
If it's recognised on your friend's computer but not on yours then it means that you probably have the versions of the motorola drivers or rsd lite that have problems.
white led solution
hope for defy with only white led light turning on. This assumes that you have already have mototola drivers and RSD lite installed.
Background : I only had defy one day when I decided to flash it with miui. I bricked on the first time with bootloops. Did research and got drivers and rsd lite. managed to find three stock t mobile roms and flashed to stock Tom, then flashed miui, since then I've been switching between miui and cm7.
Problem : After a few months of use, I decided to flash stock rom to see how the battery life would be like. Bricked it the first time with bootloops. I thought I had flashed it with wrong rom because the first time I flashed back to original rom I did not delete the roms that I thought were the original roms. So after first failure I tried to flashed with the other roms I had. after the third rom it would not go into bootloader, only white led would turn on. Tried macguiver, did not work so save your usb cable, don't mess with it ain't gonna work.
Two part solution: I realized that when I plugged phone with usb I would hear the usb tone on win 7. When to device manager and saw the other device or something like that was appearing and disappearing when I would connect and disconnect phone. I clicked it and it said Motorola device or something like that, it was sensing my defy! defy drivers were wipe out due to bad flash. I had mototola drivers so I clicked on update and searched for mototola drivers on hard drive. I had rsd lite on and it recognized the defy after driver update, even though the bootloader screen was not on and just the white led was on.
decided to flash rom that have me bootloop and it flashed it but still gave me a bootloop., by the way, the update part of bootloader showed up after a while.
Second part of solution: googled problem and found out that the phone has a stock recovery. its the robot with the triangle exclamation mark. when you get to it you have to touch the extreme lower right hand corner of the screen to get to where you can wipe data and cache. when you start wiping data / cache you have to press on ok?? on lower left hand of the screen repeatedly until wipe is complete. then reboot and tada it boots up to stock tmo USA defy.
this is the stock rom I used : JORDN_U3_6.36.0
F Y I
if you ever try to flash a rom and it just bootloops, just go into stock recovery and wipe data and cache and you should be able to boot into android.
I'm Mc Gayvering my phone. Just tried a led directly connected to USB and fried it
This is my last hope
Is your phone worked?
I have the same problem. I try many ROM,But all of them dosn't work.
When I put in the battery,it shows Bootloader,When i flash a ROM use RSD，the phone always display SW Update In progress... Then the RSD's status is error verifying code group XX(XX=32/33/39/40 etc.) checksums.
What should I do?
THS.
Help :mad :
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
wesleybinho said:
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
Click to expand...
Click to collapse
dude this is all same **** u flashed wrong sbf.
flash the sbf service flash higher or same version which came by default wid ur phone.
flashes here http://and-developers.com/sbf:defy
Hi!
I writing from Hungary! Sorry the wrong english speaking
My Defy+ new rom cm7, but not starting.
First bootloader error. Trying RSD lite, it is not working. Flashing rom, but no bootloader. Only black screen. I connected to pc, with usb: black screen and white led. Power+vol down-up or other is not work. RDS Lite know flashing rom now. rsd is communicate with phone.
Please help me. Thank you.
EDIT: Now only white led with pc usb. rsd lite is not connect the phone. please help me.
Edit: I found a post: Black screen, white led only plug is the pc = Battery dead. I recharging the battery, and run in rsd.
I need defy+ sbf file. Please send me, or add the link. Thank you! ungvari.mario @ gmail dot com
Hi umario
I've only done this a couple of times, so im no expert. One of my friends managed to mess up his phone, and when we flashed it the same thing happend to us (black screen). The phone did however connect to rsd, but the screen on the phone seems dead. Turn the phone on av push the volume button at the same time until rsd connect to the phone and flash one a rom from here:
Cant post links, but youll find a link in this post:
http://forum.xda-developers.com/showthread.php?t=853674
Some of these gave me the same situation (black screen), but i think the nordic (2.2.2 Service Flashes) worked fine. After flash connect to the net and let it update market ++ before you root it.
Good luck
Thank you, but not working. Nordic 2.2.2 service flash not extract. error on the rar.
I trying the DE, AT, CH 2.2.2, but not work. Your friend phone is Defy or Defy+?
Edit: Not working with nordic 2.2.2
RSD completed - restart the phone - finish...pass, but only empty black screen, and white led. Battery is charged.
This phone is Plus
Here you go,
http://forum.xda-developers.com/showthread.php?t=1116522
Thank you, but my phone with green cam.
Hello,
I'm sorry, but I think you knocked your Defy+ into a coma.
Check out the second section about the 3 different versions of the Defy here
So far, there is no full SBF for Defy+.
http://forum.xda-developers.com/showthread.php?p=19972362
Flash the full sbf...
U have defy+ right??
Sent from my MB525 using xda premium
Thank you, but this link sent to me zooka2.
Flash my Defy+, and WORK Thank you!!!
i don't have idea!
Hi, I have the same problem, I have defy, not defy+ already and tried to write it every soft and nothing helps. some tips
i have same as this problem
mine is mb525 with green lens
can you help me?
Just for the record...
I have recently revived my defy+ last night. Just in case google will lead someone else to this thread with the 'white light' problem I sum up some of my observations:
This happened with me when I tried to downgrade my OTA updated Defy+ (4.3.6, CG version 7) to a stock sbf (4.3.5, CG version 5 or 6... Kids, don't try this at home). No (visible) bootloader/recovery, just a white led turning on when it's on USB (not recharging, though...) It seemed like it was totally bricked. I didn't want to do the infamous macgyver hack, so I waited for a day and then have my battery charged by a Defy-owner friend of mine.
Here's the checklist (for windows):
- make sure battery is on 100%. After flashing, mine depleted to 50%... you basically have 1 shot. If not on USB, i'd suggest you to take the battery out to be sure bootloader is not draining your battery. Seriously, you have like 20 minutes before a 100% charged new battery depletes .
- install Motorola drivers
- download an appropriate SBF (if you had an OTA update on defy+ it will be most likely a dfp-231 version). Place it as close to the filesystem root as it gets and rename it to something shorter. RSDLite still has some issues with long paths...
- Run RSDLite as root AND IN WinXp SP3 COMPATIBILITY MODE!
- Volume up, power button, release power button, wait for a second and you're hopefully in bootloader mode. Try this over and over again, while RSDLite can see your phone. Try to re-run RSDLite or restart windows if nothing helps. It's always freakin' windows
- If everything's OK and the phone is recognized, flash an sbf as soon as you can. If everything goes well, you will be able to get it to 100% In the meantime you can see something on the screen like 'flashing in progress'. It was the first thing my phone said in the last 2 days.
- Be patinet, it takes about 10 minutes. It will say 'PASS' when it's done. You are on stock rom. From now you can charge your phone to 100%, root, 2dinit, and flash something that actually works
Hello mates,
this morning I've taken to update the defy of CM10-20120810 to 20120904 CM10-last (had 2.3.4 kernel "kernel-gb-234-451-134-signed")
but after upgrading, has given me the battery fault that I was 100%
I tried several times to put him the Fix battery, but nothing at all ...
so I've taken to "Flashing" the Defy, first I tested with
ME722BL6.sbf
later with
rom_froyo.sbf
and when I RDSLite says "the phone is beein Rebbot" or something .. I restart, get the Motorola logo disappears .. and goes blank ..
and puts me in RDSLite "Finished" and "PASS"
Defy but does nothing ... and when I press the power button is switched off, give it back, turn again as "Bootloader" with the following error
Err: A5, 70,39,00,27
I've also tried to say next. "sbf"
bl7-2.3fix.sbf
526krfix.sbf
Vodafone and the original:
JRDNEM_U3_3.4.2_179-4.4_VFSBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFES03A.0R _PDS03C_USAJRDNFRYOVFES_P028_A018_M002_HWp3_Servic e1FF.sbf
all with the same result ...
can help me???
I'm already not to do ... took all day ..
Which stock ROM were you on? If you flash the same ROM again, you should not have this problem. This happens mostly if you flash a ROM with lower BL than the current one on your phone.
andr0idfreak said:
Which stock ROM were you on? If you flash the same ROM again, you should not have this problem. This happens mostly if you flash a ROM with lower BL than the current one on your phone.
Click to expand...
Click to collapse
The first SBF i put, there rom_froyo.sbf (original from motorola i think)
before i try to upgrade to CM10-20120904 i have kernel 2.3.4 and i think that the same "rom_froyo.sbf", because i made only one time Flash with RDSLite...
from first and unique flash with RDSLite, only i made update from recovery mode - install zip from sd
only put cm7, cm9 and cm10, then the Gapps... and the last time when upgrade to cm10 i made, install cm10.zip, install kernel 2.3.4, and install gapps...
Any idea about the firmware version?
andr0idfreak said:
Any idea about the firmware version of rom_froyo.sbf ?
Click to expand...
Click to collapse
i have no idea..
i think that is 2.2 from motorola
i get it from HTCMania
w w w. htcmania.com/showthread.php?t=219893
but now links are not valid...
As you flashed ME722BL6.sbf, you are now on BL6 and I assume that's a Defy+ ROM, so no downgrade to Froyo. Try flashing the ME722BL6.sbf file again and don't flash froyo ROM on top of it. If it gets stuck on M logo, go to recovery and do a factory reset.
If you have a greenlens defy, you can no longer use the camera.
andr0idfreak said:
As you flashed ME722BL6.sbf, you are now on BL6 and I assume that's a Defy+ ROM, so no downgrade to Froyo. Try flashing the ME722BL6.sbf file again and don't flash froyo ROM on top of it. If it gets stuck on M logo, go to recovery and do a factory reset.
If you have a greenlens defy, you can no longer use the camera.
Click to expand...
Click to collapse
I have normal defy, with red lense (bayer)
the principal problem now is that can not made nothing... only it put in white led when i connected to usb...(no combination (power+vol+ or power vpl-) made nothing)
Try this: Pull out battery. Keep volume + pressed. Insert battery and then press power button. It should now enter bootloader mode. Connect it now to PC and then flash SBF with RSD.
andr0idfreak said:
Try this: Pull out battery. Keep volume + pressed. Insert battery and then press power button. It should now enter bootloader mode. Connect it now to PC and then flash SBF with RSD.
Click to expand...
Click to collapse
I'm trying to charge the battery via USB cut,
red wire to positive and black to negative,
I'll leave loading an hour or more, and try again.
what "sbf" do you recommend that put in defy? BL6 or BL7 ...
Could you put the recommended "sbf" links?
thanks.
Charging on unregulated USB for an hour can kill your battery
Sent from my MB526
Moved to Q&A. Please post all questions there.
Sent from my HTC Glacier using xda premium
did you fix it?
Guys please help me
iam in BL7.When i flash the bl7 sbf .First i get bootloader code courrpt message .then i remove the battery it show the message bootloader err:A5,69,4E,00,41
Rsd lite 4.9,5.6,5.7 did not detect my defy .iam format my laptop two times .it detect my defy .pls guys help me from the problem
ela1103 said:
Guys please help me
iam in BL7.When i flash the bl7 sbf .First i get bootloader code courrpt message .then i remove the battery it show the message bootloader err:A5,69,4E,00,41
Rsd lite 4.9,5.6,5.7 did not detect my defy .iam format my laptop two times .it detect my defy .pls guys help me from the problem
Click to expand...
Click to collapse
What defy you have: red, green or plus? You cant install lower rom than 188. If you have plus - you'll have all things working, red - battery can make work with batt fixes, green - camera will never work on BL7, only on CM10,CM9.1 or other roms with custom kernel. You're stuck on BL7 so try flash 231 sbf. Read this post, you'll find more info: http://forum.xda-developers.com/showpost.php?p=12419400&postcount=3
Plz Help
gark81 said:
Hello mates,
this morning I've taken to update the defy of CM10-20120810 to 20120904 CM10-last (had 2.3.4 kernel "kernel-gb-234-451-134-signed")
but after upgrading, has given me the battery fault that I was 100%
I tried several times to put him the Fix battery, but nothing at all ...
so I've taken to "Flashing" the Defy, first I tested with
ME722BL6.sbf
later with
rom_froyo.sbf
and when I RDSLite says "the phone is beein Rebbot" or something .. I restart, get the Motorola logo disappears .. and goes blank ..
and puts me in RDSLite "Finished" and "PASS"
Defy but does nothing ... and when I press the power button is switched off, give it back, turn again as "Bootloader" with the following error
Err: A5, 70,39,00,27
I've also tried to say next. "sbf"
bl7-2.3fix.sbf
526krfix.sbf
Vodafone and the original:
JRDNEM_U3_3.4.2_179-4.4_VFSBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFES03A.0R _PDS03C_USAJRDNFRYOVFES_P028_A018_M002_HWp3_Servic e1FF.sbf
all with the same result ...
can help me???
I'm already not to do ... took all day ..
Click to expand...
Click to collapse
Hi Frnd,
How you solve this problem, I have the same problem...
Plz, help me.... in Advnc Thanx......
My Defy had CM7.1, running well. I tried to upgrade to CM9 after making a nandroid backup. During first boot, i was stuck at 'wizard has stopped' when i touched the android icon.
I tried to restore my nandroid backup, but phone booted into recovery.
Then i tried to flash JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTNORD_P003_A001_HWp3_Service1FF.sbf
through RSD lite 4.9 but probably battery was drained, as i could not get the phone to boot after pass message, just a white LED and phone not detecting on RSD lite and not going into boot loader.
With macgyver hack, my pc could recognize the phone and i have flashed a number of ROMs but phone never boots.
While rest all sbfs were froyo, i also flashed
3.4.2-179-002-tmobile-froyo-fixed.sbf
T-mobile froyo bootonly.sbf
and
Tmo_2.2.1-3.4.2-107-boot-devtree-ONLY.sbf
Please help what should i do to get my defy back? I dont have warranty cover.
avionics49er said:
My Defy had CM7.1, running well. I tried to upgrade to CM9 after making a nandroid backup. During first boot, i was stuck at 'wizard has stopped' when i touched the android icon.
I tried to restore my nandroid backup, but phone booted into recovery.
Then i tried to flash JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTNORD_P003_A001_HWp3_Service1FF.sbf
through RSD lite 4.9 but probably battery was drained, as i could not get the phone to boot after pass message, just a white LED and phone not detecting on RSD lite and not going into boot loader.
With macgyver hack, my pc could recognize the phone and i have flashed a number of ROMs but phone never boots.
While rest all sbfs were froyo, i also flashed
3.4.2-179-002-tmobile-froyo-fixed.sbf
T-mobile froyo bootonly.sbf
and
Tmo_2.2.1-3.4.2-107-boot-devtree-ONLY.sbf
Please help what should i do to get my defy back? I dont have warranty cover.
Click to expand...
Click to collapse
after macgyver hack flash one sbf. go to stock recovery and wipe your data/chage.
Than you sould flash again one froyo. And it will work. Good luck.
I had same problem when i went back to froyo. I forgot to wipe date/chage and it didn't boot.
defy bricked
Blazs said:
after macgyver hack flash one sbf. go to stock recovery and wipe your data/chage.
Than you sould flash again one froyo. And it will work. Good luck.
I had same problem when i went back to froyo. I forgot to wipe date/chage and it didn't boot.
Click to expand...
Click to collapse
The phone just does not turn on, stays on blank screen, so i can not go to storck recovery to wipe data / cache.
Hi
flash JORDN_U3_6.36.0
this is froyo on BL6.
This happened to me too!!! has this alredy been fixed???
Same problem
Hi together, well I hope this is the right place.... I'm owner of a motorola Defy MB 525 that ran without any problems on cm9 nightly for last 6 month. Now suddenly it doesn't start any moer andIi can't access recovery setup nor anything else so it's impossible to wipe anything, too. When connected to my notebook only the white LED is shining but nothing happens. The typical "hardware-found-ping" appears and several seconds later the " hardware was removed ping." The right drivers are installed on my notebook, but even RSD Lite doesn't found my Defy so I can't flash enything. Anyone has any Idea what to to?
Thank's in advance for any help!
Heddi
Heddi72 said:
Hi together, well I hope this is the right place.... I'm owner of a motorola Defy MB 525 that ran without any problems on cm9 nightly for last 6 month. Now suddenly it doesn't start any moer andIi can't access recovery setup nor anything else so it's impossible to wipe anything, too. When connected to my notebook only the white LED is shining but nothing happens. The typical "hardware-found-ping" appears and several seconds later the " hardware was removed ping." The right drivers are installed on my notebook, but even RSD Lite doesn't found my Defy so I can't flash enything. Anyone has any Idea what to to?
Thank's in advance for any help!
Heddi
Click to expand...
Click to collapse
I have the same problem.
But RSD Lite saw my defy, but when RSD Lite send phone to reboot after flash - nothing happening.
I've tried a lot of SBFs from h*t*t*p://sbf.droid-developers.org/umts_jordan/list.php but nothing helping.
My defy show only two screens: 'SW Update In Progress...' and 'SW Update Complete' and nothing new on display.
Maybe my battery discharged and McGyver hack doesn't help....
Defy: Can flash only one sbf
rendevor said:
I have the same problem.
But RSD Lite saw my defy, but when RSD Lite send phone to reboot after flash - nothing happening.
I've tried a lot of SBFs from h*t*t*p://sbf.droid-developers.org/umts_jordan/list.php but nothing helping.
My defy show only two screens: 'SW Update In Progress...' and 'SW Update Complete' and nothing new on display.
Maybe my battery discharged and McGyver hack doesn't help....
Click to expand...
Click to collapse
I also have the same problem. Did you find any solution for the same.
sarvranjan said:
I also have the same problem. Did you find any solution for the same.
Click to expand...
Click to collapse
Try to flash the file mentioned here. This did the job for me.
http://forum.xda-developers.com/showpost.php?p=40959834&postcount=3
Good luck!
Hi guys,
Since this morning I have a very frustrating with my Defy 525. When I woke up at 7 am, everything worked perfectly normal. At 10 am my screen and phone was totally frozen.
I decided to take my battery out of the phone since nothing worked. I hoped everything would work normal again, quod non...
Sometimes the phone is able to boot, but most of the time it is stuck at the red motorola-logo that is pounding like a heart. It keeps beating without the phone proceeding to the real Android-OS.
However, like 10% of the time, the phone is able to enter Android (2.2 Froyo), but then it freezes after +- 20 seconds...
What you should know about my Defy:
Froyo 2.2 (stock)
Rooted 6 months ago with SuperOneClick
I am a big noob, so I really don't know what to do. I've read this openingspost (http://forum.xda-developers.com/showthread.php?t=1618718), but I don't know if that is of use.
Thx for the answers! You are brilliant
Try without SD card ...... if no work
You can try resetting the phone to factory settings (lose all installed programs, settings , and contacts but not the files in the SD)
1-Turn off the phone
2 - Press power and vol down at the same time .... you will see a symbol in the middle of the screen,
3- press up vol + vol down at same time, you will see a menu
4 - do a "wipe data / factory reset" and "wipe cache partition" ...
reconfigure your phone and see if fixed
hoefelab said:
What you should know about my Defy:
Froyo 2.2 (stock)
Rooted 6 months ago with SuperOneClick
I am a big noob, so I really don't know what to do. I've read this openingspost (http://forum.xda-developers.com/showthread.php?t=1618718), but I don't know if that is of use.
Click to expand...
Click to collapse
Hello Mate...
The post you are referring to is of no use to you...Your phone is not bricked or in bootloop
Its time you should kick off your official froyo go ahead with ICS or JB... I have my defy running of JB(CM10) it works just fine...
BTW which lens do you have? Red or Green?