With the arrival of S-OFF for the HTC One we also got the possibility to flash a custom splash screen. Many of us used this already on their previous devices and now it's possible for the HTC One too.
Preparing image for flashing:
First you need the image of your choice. Make sure you it has the size 1080x1920 !!!. It must have been already the correct size because the converter doesn't re-size it. The image can be in the format BMP, JPG or PNG.
Grab EZ Splash Screen Flasher and Image Converter and convert your image. Instructions how to convert it are in the original thread.
Take the custom.img in the place-image-here folder and rename it to splash1.nb0.
Download the attached splash.zip and replace the splash1.nb0 inside.
Have a look at the android-info.txt file and check if your CID is present inside. IF not than add it. I have already added a lot of CID's but if there are some missing I will update it from time to time.
Requirements for flashing:
S-OFF
Steps for flashing:
Boot your HTC One into bootloader and enter fastboot mode
adb reboot bootloader
Start RUU Flash mode
fastboot oem rebootRUU
Flash the custom splash screen
fastboot flash zip splash.zip
Make sure that there are no error messages when flashing
Reboot your device
fastboot reboot
If someone is interested this is the actual image in the splash.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you want to go back flash the splash_stock.zip
fastboot flash zip splash_stock.zip
THX for Tutorial, here my splashscreens.
Thanks for the tutorial, now i'm S-Off i can see me turning into a splash flashaholic!
thx for sharing..works fine here..cheers~
Hi chrisch1974,
I do not own this device myself, but Sneakyghost and I have been playing around a bit, and he confirms that this works for the One. It seemed appropriate to offer it up here in your thread..
For the One-S Ville, I have an online boot splash zip generator. You can upload a picture and it will generate a recovery flashable .zip file. I have now made a version for the One M7 that's identical, except it uses a different resolution and block device. (1080x1920 into P13 instead of 540x960 into P14) For people who don't have a windows box available, this might be an easier option.
http://jobiwan.net:81/bootsplash-one
I don't know whether S-Off is required or not. On the Ville you have to be either S-Off or on a lower hboot version. Again, the .zip files this generates are recovery flashable, not fastboot-RUU flashable, unlike yours.
Enjoy,
-Jobo
(PS: This is my original thread for the One-S Ville: http://forum.xda-developers.com/showthread.php?t=1777223 The online generator is introduced in post#115.)
chrisch1974 said:
With the arrival of S-OFF for the HTC One we also got the possibility to flash a custom splash screen. Many of us used this already on their previous devices and now it's possible for the HTC One too.
Preparing image for flashing:
First you need the image of your choice. Make sure you it has the size 1080x1920 !!!. It must have been already the correct size because the converter doesn't re-size it. The image can be in the format BMP, JPG or PNG.
Grab EZ Splash Screen Flasher and Image Converter and convert your image. Instructions how to convert it are in the original thread.
Take the custom.img in the place-image-here folder and rename it to splash1.nb0.
Download the attached splash.zip and replace the splash1.nb0 inside.
Have a look at the android-info.txt file and check if your CID is present inside. IF not than add it. I have already added a lot of CID's but if there are some missing I will update it from time to time.
Requirements for flashing:
S-OFF
Steps for flashing:
Boot your HTC One into bootloader and enter fastboot mode
adb reboot bootloader
Start RUU Flash mode
fastboot oem rebootRUU
Flash the custom splash screen
fastboot flash zip splash.zip
Make sure that there are no error messages when flashing
Reboot your device
fastboot reboot
Click to expand...
Click to collapse
I attempted to flash with these instructions and received the following:
C:\Users\brandon\Downloads\One_M7_All-In-One_Kit_v1.3\Data>fastboot flash zip sp
lash_stock.zip
sending 'zip' (20 KB)...
OKAY [ 0.233s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 0.666s
I edited the text file to add my CID (BS_US001) but no luck...
I am S-OFF but did not change the CID.
MG
Hey Chrisch!
Nice thread really! I was a bit frustrated first when i found it because i spent all afternoon working out where splash is, how to convert it etc. Now you have been faster!
Well, at least Touch of Jobo can offer his form for recovery flashable zips as a supplement.
I will link your thread to my hboot modification thread so people who edit out the red warning have easy access to custom splash screens (in my eyes these two always go together somehow )
Well done mate! Thanks a lot!
touch of jobo said:
Hi chrisch1974,
I do not own this device myself, but Sneakyghost and I have been playing around a bit, and he confirms that this works for the One. It seemed appropriate to offer it up here in your thread..
For the One-S Ville, I have an online boot splash zip generator. You can upload a picture and it will generate a recovery flashable .zip file. I have now made a version for the One M7 that's identical, except it uses a different resolution and block device. (1080x1920 into P13 instead of 540x960 into P14) For people who don't have a windows box available, this might be an easier option.
http://tibook.jb.b4m.com:81/bootsplash-one
I don't know whether S-Off is required or not. On the Ville you have to be either S-Off or on a lower hboot version. Again, the .zip files this generates are recovery flashable, not fastboot-RUU flashable, unlike yours.
Enjoy,
-Jobo
(PS: This is my original thread for the One-S Ville: http://forum.xda-developers.com/showthread.php?t=1777223 The online generator is introduces in post#115.)
Click to expand...
Click to collapse
It won't flash I n recovery, I tried to open up the zip and it fails
Sent from my HTC One using Tapatalk 4 Beta
superchilpil said:
It won't flash I n recovery, I tried to open up the zip and it fails
Click to expand...
Click to collapse
I've tested it myself and it creates valid .zip files. I can not flash them because I don't have a One. Is the z.ip file you get zero bytes? Can you (zip up and) post the picture you tried to upload?
Edit to add: can 2 or 3 others please report? So as to see whether this is a special case, or it just doesn't work at all..
Edit2: I used the metallica picture you posted, and it generated a 905K .zip file. (attached)
touch of jobo said:
I've tested it myself and it creates valid .zip files. I can not flash them because I don't have a One. Is the z.ip file you get zero bytes? Can you (zip up and) post the picture you tried to upload?
Click to expand...
Click to collapse
The zip I got is about 1.11 kb
Here's the image http://db.tt/rZlKDiBZ
Sent from my HTC One using Tapatalk 4 Beta
---------- Post added at 12:09 PM ---------- Previous post was at 12:02 PM ----------
I figured out my issue, it was my phone. Tried it on a computer and it works just fine
Sorry for the troubles
superchilpil said:
The zip I got is about 1.11 kb
Here's the image http://db.tt/rZlKDiBZ
Sent from my HTC One using Tapatalk 4 Beta
---------- Post added at 12:09 PM ---------- Previous post was at 12:02 PM ----------
I figured out my issue, it was my phone. Tried it on a computer and it works just fine
Sorry for the troubles
Click to expand...
Click to collapse
Your zip is broken. THats not right. Re-Do the process. It worked for me totally ok.
I just tried it again. My zip is 139KB from an image with only 23KB.
[EDIT] lol i just saw you fixed it already. Totally overseen that haha!
---------- Post added at 07:20 PM ---------- Previous post was at 07:14 PM ----------
moregadget said:
I attempted to flash with these instructions and received the following:
C:\Users\brandon\Downloads\One_M7_All-In-One_Kit_v1.3\Data>fastboot flash zip sp
lash_stock.zip
sending 'zip' (20 KB)...
OKAY [ 0.233s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 0.666s
I edited the text file to add my CID (BS_US001) but no luck...
I am S-OFF but did not change the CID
MG
Click to expand...
Click to collapse
It doesn't say FAILED custom id check (CID) but model id check (MID)
I have that on my thread for the hboots as well. I am still trying to find out if there are ONE devices with a different Model ID.
[EDIT]
OK thanks to Mike1986 Website i found the answer already.
There are three MID's
PN0710000
PN0711000
and a third one Mike didn't specify.
You can try to change the MID in your android-info.txt and see if that helps Maybe it flashes then!
Phone would not get past Rootbox bootanimation after successful flashing (the splash showed up fine). fastboot erase cache seems to have fixed it though. Thanks for the how-to!
modelid: PN0712000
cidnum: 11111111
Sneakyghost said:
It doesn't sai FAILED custom id check (CID) but model id check (MID)
I have that on my thread for the hboots as well. I am still trying to find out if there are ONE devices with a different Model ID.
Can you run fastboot getvar all for me to get me your model id? Thank you!
Click to expand...
Click to collapse
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
MG
Thanks, it worked great! I recreated the Nexus splash screen and posted it below if anyone wants it.
just a theoretical scenario, if I were to flash the custom splash screen and then revert to S-ON, would the splash screen stay? and would my phone become a brick?
Stargazer418 said:
Thanks, it worked great! I recreated the Nexus splash screen and posted it below if anyone wants it.
Click to expand...
Click to collapse
I'm guessing you've managed to remove the "this is for development purposes" message?
dh2311 said:
just a theoretical scenario, if I were to flash the custom splash screen and then revert to S-ON, would the splash screen stay? and would my phone become a brick?
Click to expand...
Click to collapse
Only a RUU or maybe an OTA can reset your splash back to stock, so yes, it will stay. The splash image is not signed. Having a modified splash on S-On will not brick you. (Having a modified hboot on S-On will brick you tho!)
Simba501 said:
I'm guessing you've managed to remove the "this is for development purposes" message?
Click to expand...
Click to collapse
There's another thread on how to do that, look for hboot mod
Sent from my HTC One using Tapatalk 4 Beta
Simba501 said:
I'm guessing you've managed to remove the "this is for development purposes" message?
Click to expand...
Click to collapse
No, I didn't. I saw the thread about removing it, but I don't know if it will overwrite the splash I already flashed. It doesn't seem to show up every boot, though, so it's not that bad in my opinion.
Related
Hi,
I almost killed my HTC Magic when trying to upgrade it, Its locked with loop boot unable to enter recovery mode all i can do is just to get into fastboot mode
Help me to completely wash out the remaining stuff and write an new ROM to Magic
through flash boot i believe my usb drivers are detected in flash boot
Pls walk me through
Help me thx!!!!!!
You should go to fastboot and flash another recovery and then you can go to recovery.
hanntbk said:
You should go to fastboot and flash another recovery and then you can go to recovery.
Click to expand...
Click to collapse
Thanks for your support
It will be great if you can provide me the files required & tutorial it will be really helpfull
vijay2network said:
Thanks for your support
It will be great if you can provide me the files required & tutorial it will be really helpfull
Click to expand...
Click to collapse
Here: http://forum.xda-developers.com/showthread.php?t=1059911
this is the tutorial and files to flash recovery
danger_tweaker said:
Here: http://forum.xda-developers.com/showthread.php?t=1059911
this is the tutorial and files to flash recovery
Click to expand...
Click to collapse
Hey I'm seriously noob when its coming to HTC.
I dnt even know how fast boot mode works, If you can guide me through brief tutorial that should help me
Seriously dnt understand that tutorial, All i have done is boot phone to flash boot mode and waited PC to detect it, I dnt know what exactly should i do after connecting it
First open CMD.exe (command/ black box)
type cd and the go to were the files are located so if you put them in the map android on your c: drive it's cd c:\android
then connect your phone and copy/paste the codes from that post.
PowerPlop said:
First open CMD.exe (command/ black box)
type cd and the go to were the files are located so if you put them in the map android on your c: drive it's cd c:\android
then connect your phone and copy/paste the codes from that post.
Click to expand...
Click to collapse
Hey thanks for the quick post
I'm also wondering all the post abt flasboot has some tools like "SDK" "adb"
Do i need similar tools to proceed with this ??!!
Follow this tutorial to install what you need.
It's for installing ADB and Fastboot.
PowerPlop said:
Follow this tutorial to install what you need.
It's for installing ADB and Fastboot.
Click to expand...
Click to collapse
Do i need to install adb or flashboot to work on this scenario?
If anyone can guide me remotely it would be great.
vijay2network said:
Do i need to install adb or flashboot to work on this scenario?
If anyone can guide me remotely it would be great.
Click to expand...
Click to collapse
of course, guidance it already exists on the link provided by PowerPlop
I tried to flash the CWM recovery from my PC through CLI, Below is the error poped when i tried to boot or flash from image
C:\Downloads\Browser Download>fastboot boot recovery-clockwork-3.0.2.8-bravo.img
downloading 'boot.img'... FAILED (remote: not allow)
finished. total time: 0.002s
C:\Downloads\Browser Download>fastboot flash recovery-clockwork-3.0.2.8-bravo.im
g
unknown partition 'recovery-clockwork-3.0.2.8-bravo.img'
error: cannot determine image filename for 'recovery-clockwork-3.0.2.8-bravo.img
I tried downloading recovery img from "http://forum.xda-developers.com/showthread.php?t=1059911" thread but the link has expired
Hence i download this image from 4shared, Not sure this is the correct rom or not.
Help me after this
This happened because you flashed bravo recovery and not the 32a recovery.
follow the link provided by danger_tweaker post no. 4
everything is properly explained in and download your recovery "carz-clockworkmod-3.0.2.8-recovery.zip" only or if you are able to turn on device then download ROM Manager and flash recovery because htc magic are legacy(old,outdated) devices so file are removed from most of the sites.
BTW have you ever flashed the recovery???
I had searched for your recovery but all links are expired. View attachment 1161540 See if this recovery works for you. I had downloaded it long back and currently I don't have any previous version of carz mod :angel:, neither I remember its source link . It is the same clockwork mod-carz-recovery only version is different v4.0.1.4 see if it flashes through fastboot :fingers-crossed:.
vijay2network said:
C:\Downloads\Browser Download>fastboot flash recovery-clockwork-3.0.2.8-bravo.im
g
unknown partition 'recovery-clockwork-3.0.2.8-bravo.img'
error: cannot determine image filename for 'recovery-clockwork-3.0.2.8-bravo.img
Click to expand...
Click to collapse
That's not working because your command is wrong, you forgot one "recovery". He's telling you that there is no partition named "recovery-clockwork-3.0.2.8-bravo.img" because the correct name is "recovery". The correct command would be
Code:
fastboot flash [COLOR="Red"]recovery[/COLOR] recovery-clockwork-3.0.2.8-bravo.img
But i think you'll also get "FAILED (remote: not allow)".
I think you need to tell us what's written in your fastboot screen on the phone. Also a
Code:
fastboot getvar version-main
would be helpful.
C:\Android>fastboot flash recovery clockwork-3.0.2.8.img
sending 'recovery' (3806 KB)... FAILED (remote: not allow)
finished. total time: 0.001s
C:\Android>fastboot getvar version-main
version-main: 3.05.720.3
finished. total time: 0.002s
As u said i got the same error
I worked on gold card mode and try updating using "sappimg.zip"
I get "Incorrect CID" as error even after me making an exact gold card asper the tutorial @ http://wiki.cyanogenmod.com/wiki/Howto:_Create_a_Goldcard
Help me ASAP
You get this error "FAILED (remote: not allow)" because of your SPL-version - it seems to be a perfect one, you can't flash your phone with commandline.
Show us what's written in your fastboot-menu (everything, radio, hboot and so on, everything you can see).
Also give us the output of
Code:
fastboot getvar cid
please.
When did you get this error "Incorrect CID"?
Do you have some other Android-phone? Then create your Goldcard with GoldCardTool (for example as explained here).
Which sappimg.zip did you try? Don't just take one without knowing if you can take it!
1. Output for command
C:\Android>fastboot getvar cid
cid: HTC__038♦
finished. total time: 0.001s
2. Attached the screen shot of HBoot & Fastboot mode
3. I have an S2 i managed to fetch the CID using SimpleGoldCard_v1.zip from http://dl.xda-developers.com/attach...d6/4ff07379/5/2/8/8/9/6/SimpleGoldCard_v1.zip
4. I slected mmc1 in the tool to detect my MMC CID to be changed to gold card
5. I used ROM v2.16.707.3 (NON-Perfected stock SPL v1.33.0009 from this http://forum.xda-developers.com/showthread.php?t=548218
I believe i have provide u all information i have got. Please provide me support ASAP :highfive:
Snapshots
http://www.image-share.com/ijpg-1592-111.html
http://www.image-share.com/ijpg-1592-112.html
http://www.image-share.com/ijpg-1592-113.html
I can't open the screenshots you attached, sorry.
edit: You posted while i did - ok!
---------- Post added at 04:15 PM ---------- Previous post was at 03:52 PM ----------
As i said, because of the SPL-version you can't flash with commandline. You have to use sappimg.zip or nbh. To flash those, the rom needs to have a higher version than the installed one.
Your main-version is 3.05.720.3, as you see here a higher version would be "3.05.861.2 Hutchinson Australia". To flash this you need the Goldcard - it lets you install roms of different providers.
Download that rom, copy it to your SD-card (Goldcard) and rename it to SAPPIMG.zip and try to flash it. If it still tells you "CID incorrect" your Goldcard isn't created correct or the SD-card doesn't work as Goldcard.
If you finished this we're going on. Just short:
When you're done your phone should boot the normal way. Now you need to get the correct rom for your CID on it - 39) 3.05.720.3 1.76.0009H 6.35.08.29 N HTC__038 is for your phone, it's that one 3.05.720.3 India.
You can't flash this as sappimg.zip because the version of this rom is lower than the installed one. You need to install a custom-recovery on your phone to be able to install any rom-version - to install this you need to root your phone (there are some tutorials on XDA). With the custom-recovery you're going to install the stock-rom and you're done. If you like to you can also install custom-roms on your phone - you just need to install a custom-recovery again to install that.
I'm not an expert - i just know what i read and experienced when i debricked my HTC magic. If somebody thinks i'm wrong with my suggestions, just tell! :laugh:
matzehtc said:
I can't open the screenshots you attached, sorry.
edit: You posted while i did - ok!
---------- Post added at 04:15 PM ---------- Previous post was at 03:52 PM ----------
As i said, because of the SPL-version you can't flash with commandline. You have to use sappimg.zip or nbh. To flash those, the rom needs to have a higher version than the installed one.
Your main-version is 3.05.720.3, as you see here a higher version would be "3.05.861.2 Hutchinson Australia". To flash this you need the Goldcard - it lets you install roms of different providers.
Download that rom, copy it to your SD-card (Goldcard) and rename it to SAPPIMG.zip and try to flash it. If it still tells you "CID incorrect" your Goldcard isn't created correct or the SD-card doesn't work as Goldcard.
If you finished this we're going on. Just short:
When you're done your phone should boot the normal way. Now you need to get the correct rom for your CID on it - 39) 3.05.720.3 1.76.0009H 6.35.08.29 N HTC__038 is for your phone, it's that one 3.05.720.3 India.
You can't flash this as sappimg.zip because the version of this rom is lower than the installed one. You need to install a custom-recovery on your phone to be able to install any rom-version - to install this you need to root your phone (there are some tutorials on XDA). With the custom-recovery you're going to install the stock-rom and you're done. If you like to you can also install custom-roms on your phone - you just need to install a custom-recovery again to install that.
I'm not an expert - i just know what i read and experienced when i debricked my HTC magic. If somebody thinks i'm wrong with my suggestions, just tell! :laugh:
Click to expand...
Click to collapse
Hi thx for ur quick reponse, The latest image what u said "3.05.861.2 Hutchinson Australia" is in ".exe" format
how do i proceed with it :-/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is a placeholder for all possible firmwares we can get from official HTC OTA's.
Your CID number must be exactly the same. If it's written "HTC__001" it means you can't flash it, if your CID is "02__001". The whole text must match!
How To: Find the proper firmware variant for the HTC device
How To: Flash firmware package on the HTC device
Please READ this small F.A.Q. before continuing!
What is firmware.zip?
Firmware.zip is a part of each OTA update from HTC. It contains important part of the firmware like radio, bootloader, recovery, kernel etc..
Why it's important to flash firmware.zip and when should I flash it?
It is recommended to have flashed latest firmware on your device for best modem performance and system stability. Sometimes it's necessary to have latest bootloader flashed because otherwise your device might not work well with new system update.
Does firmware.zip contains radio?
Yes, it does contain radio, and for S-ON devices the only method to update radio is to flash latest firmware.zip
Why it's important to flash it before flashing custom ROM?
Because firmware.zip contains boot.img (ramdisk and kernel) that will replace custom boot.img from any custom ROM you have. That's why you have to flash firmware.zip first, because otherwise boot.img will be overwritten with stock one.
If you already flashed firmware.zip after flashing custom ROM, just flash this particular custom ROM again.
Does firmware.zip contains recovery?
Yes, it does contain recovery image, that's why after flashing firmware.zip you will have to flash custom recovery again, to be able to flash custom ROM afterwards.
Can I flash this firmware.zip on any HTC One?
Not if your device is S-ON. To be able to flash it on S-ON device, your modelid (example: PN0710000) and cidnum (example: HTC__001) must match the firmware.zip version you are about to flash.
If my modelid or cidnum doesn't match, can I brick my device if I try to flash firmware.zip anyway?
As long as your device is S-ON flashing firmware.zip with non matching modelid or cidnum will result in error and nothing will be flashed, so there is no risk of brick.
Do I need to have locked, unlocked or relocked bootloader to be able to flash firmware.zip?
Your bootloader needs to be relocked.
If I can't flash newest firmware.zip because of wrong modeid (MID) or cidnum (CID) does it mean I can't use custom ROM based on the latest HTC update?
In most cases you should be able to run any custom ROM as long as hboot update is not mandatory.
What if there is no firmware.zip for my MID/CID?
Try to find latest OTA update for your original stock ROM and send it to me. I will post firmware.zip here.
How to flash?
(bootloader needs to be relocked)
If you are S-ON ---> Re-lock your bootloader (this will most probably wipe content of your device)
If you are S-OFF ---> no need to re-lock the bootloader.
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet or in case it's S-ON)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
RUUs variants:
Click here
thxs mate.
Just got my M8 today, managed to grab the 1.54.401.5 OTA zip. Thought I'd post the firmware zip here
1.54.401.5 firmware
Code:
HBOOT 3.16.0.0000
RADIO 1.15.2133156.UA13G
OS 1.54.401.5
this wont require me to factory reset right? i can never remember this like an idiot :silly:
fisha21 said:
Just got my M8 today, managed to grab the 1.54.401.5 OTA zip. Thought I'd post the firmware zip here
1.54.401.5 firmware
Code:
HBOOT 3.16.0.0000
RADIO 1.15.2133156.UA13G
OS 1.54.401.5
Click to expand...
Click to collapse
Can you post the recovery as well?
SaHiLzZ said:
Can you post the recovery as well?
Click to expand...
Click to collapse
It's all in the first post...
nvm...i just did it and got my answer...
flaSHINg now but have :
remote 12 signature verify fail
hello... so I found my mode is 0P6B70000 and my cid is SPCS_001.. Will this work for my phone? if not what I really need is jus a way to flash back to stock since I screwed up my phone so bad that most of my stuff doesn't work.. I am rooted/unlocked/s-on.. thankx for any help in pointing me in the right direction
---------- Post added at 12:51 AM ---------- Previous post was at 12:46 AM ----------
l1ttl3z said:
hello... so I found my mode is 0P6B70000 and my cid is SPCS_001.. Will this work for my phone? if not what I really need is jus a way to flash back to stock since I screwed up my phone so bad that most of my stuff doesn't work.. I am rooted/unlocked/s-on.. thankx for any help in pointing me in the right direction
Click to expand...
Click to collapse
just read this again and I now know that this will not work for me.. I think I found a sys dump under sprint section.. Is that something that I can just flash with twrp and have my stock rom back?
jonata said:
flaSHINg now but have :
remote 12 signature verify fail
Click to expand...
Click to collapse
fastboot getvar all
Sent from my HTC One
l1ttl3z said:
hello... so I found my mode is 0P6B70000 and my cid is SPCS_001.. Will this work for my phone? if not what I really need is jus a way to flash back to stock since I screwed up my phone so bad that most of my stuff doesn't work.. I am rooted/unlocked/s-on.. thankx for any help in pointing me in the right direction
---------- Post added at 12:51 AM ---------- Previous post was at 12:46 AM ----------
just read this again and I now know that this will not work for me.. I think I found a sys dump under sprint section.. Is that something that I can just flash with twrp and have my stock rom back?
Click to expand...
Click to collapse
also: fastboot getvar all
Sent from my HTC One
@mike1986., will the Asian 2.5Ghz variant be compatible with all the roms and firmware of the 2.3Ghz US variant?
Can you add the cid O2___102?
ChronoWerX said:
Can you add the cid O2___102?
Click to expand...
Click to collapse
Did you get your phone from O2 Germany? As more as I read about CID and the other stuff, as more confused I am. Got my phone from O2 and have CID O2___001...have operators in one country also different CIDs? Which firmware you use?
Deleted. Wrong info
From what i have seen before you can have different cids but with the same main version number.
If i say this correctly the CID corresponds with regions, so basically you can have different cids yes.
Correct me if i am wrong please
shorty1483 said:
Did you get your phone from O2 Germany? As more as I read about CID and the other stuff, as more confused I am. Got my phone from O2 and have CID O2___001...have operators in one country also different CIDs? Which firmware you use?
Click to expand...
Click to collapse
O2___001 is for O2 UK
My is a O2 DE device
ChronoWerX said:
O2___001 is for O2 UK
My is a O2 DE device
Click to expand...
Click to collapse
But my device is also from O2 Germany...why they sell O2 UK devices?
In store stock problems maybe ?
Mr Hofs said:
In store stock problems maybe ?
Click to expand...
Click to collapse
Nevermind...also got O2___102...dunno whats wrong with me today.
What is the dev edition Cid?
Sent from my HTC6525LVW using Tapatalk
Here is a guide on updating your branded/unbranded non developer edition HTC ONE M8 to the developer edition android 5.0 (lollipop) update and also converting your device to a developer edition device by modifying the MID and CID of your device.
(this will also get you new updates as soon as HTC releases them as your phone is now a developer edition phone)
REQUIRES S-OFF AND POSSIBLY UNLOCKED BOOTLOADER
GPE CONVERTED DEVICES NEED TO GO BACK TO SENSE FIRST
HTC Drivers - https://mega.co.nz/#!9cpz0Soa!rZH0H5djENbFN2xkS9S7yUlXzX_vcC5yOHhmUR55kUM
ADB + Fastboot - https://drive.google.com/file/d/0B1S0LCuXCnnmOWhnUk1ZWVdQakE/view
First thing you want to do is boot the device and enable adb then type the below lines
Code:
adb shell
su
DO NOT MESS UP THE BELOW COMMAND - COPY AND PASTE IT - ENTERING IT WRONG COUlD BRICK YOUR DEVICE
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x31\x00\x32\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
Code:
adb reboot bootloader
fastboot oem writecid BS_US002
fastboot reboot-bootloader
Download this file RUU_M8_UL_L50_SENSE60_MR_BrightstarUS_WWE_4.16.1540.8_Radio_1.24.21331147A1.09G_20.68.4196.01_F_release_411207_signed_2.exe
(STOCK LOLLIPOP 5.0 RUU FOR UNLOCKED + DEVELOPER EDITION HTC ONE M8 [this is what you have now since you changed CID and MID])
CRC32: 665CF81E
MD5: FDB3C48A40F1D42165783D75CFF4B846
SHA-1: 0B3C785F7735133ED11852E2FFAD29949A514DB1
Once it is downloaded, type the following commands
Code:
fastboot oem rebootRUU
FLASHING RUU'S WILL WIPE YOUR INTERNAL SD (/DATA/MEDIA)
Run RUU_M8_UL_L50_SENSE60_MR_BrightstarUS_WWE_4.16.1540.8_Radio_1.24.21331147A1.09G_20.68.4196.01_F_release_411207_signed_2.exe and just press next/confirm etc. ignore the usb connection instructions, once that is done, the device will reboot and you will be on lollipop
CLICK FOR OLD METHOD
Download this file - http://dl3.htc.com/application/RUU_..._2G_20.63.4196.01_release_394319_signed_2.exe (Mirror)
(STOCK RUU FOR UNLOCKED + DEVELOPER EDITION HTC ONE M8 [this is what you have now since you changed CID and MID])
CRC32: 79E8DE54
MD5: 5040B8D54D0ADA150531C66D899ABBE9
SHA-1: A1E39A089A23417DDF5A682BB6A23C9BDE77025B
Once it is downloaded, type the following commands
Code:
fastboot oem rebootRUU
flashing the RUU will most defintely wipe your internal sd (/data/media)
Run RUU_M8_UL_K444_SENSE60_MR_BrightstarUS_WWE_3.28.1540.5_Radio_1.21.21331147A1.19_2G_20.63.4196.01_release_394319_signed_2.exe and just press next/confirm etc. ignore the usb connection instructions
once that is done, the device will reboot and you will be able to check for updates and find the lollipop update.
OPTIONAL Zip file for the OTA https://docs.google.com/uc?id=0B0lhP19GCj8fVDNCeE9WZUI5ZTQ&export=download - Boot to stock recovery, press vol+ and vol- and power when at the triangle thingy, then select the zip
This method isn't the quickest if you are already on a compatible version but if your not then this will get you sorted, i spent multiple hours getting this sorted.
Credit for the mid/cid stuff goes to this thread http://forum.xda-developers.com/htc-one-m8/general/change-wwe-m8-to-dev-edition-ota-t2826567
ROOT: Either flash TWRP and let it do it's thing when u go to exit without root or flash a SuperSU Flashable ZIP!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
great guide! will this guide if altered [or not] work for cdma [Verizon] version working. thanks
Does this work if I converted to GPe earlier?
Just wanted to get one thing clear. If I have SuperCID, I don't need to change my CID to the one provided above, right?
Stupid question ahead: Will my data be whiped during the RUU flashing? Or will it just update it, with keeping everything in place. I just don't want to reinstall everything I am already S-Off and unlocked BL
mzrdisi said:
*nevermind*
Click to expand...
Click to collapse
OK
pavankvn said:
Does this work if I converted to GPe earlier?
Click to expand...
Click to collapse
I never tested on GPE device or GPE converted device sorry.
Jamal Ahmed said:
Just wanted to get one thing clear. If I have SuperCID, I don't need to change my CID to the one provided above, right?
Click to expand...
Click to collapse
Not sure try it if you want. it's not difficult to change it though.
Tilgi said:
Stupid question ahead: Will my data be whiped during the RUU flashing? Or will it just update it, with keeping everything in place. I just don't want to reinstall everything I am already S-Off and unlocked BL
Click to expand...
Click to collapse
I believe it will wipe all data including internal sd (atleast it did for me)
Not working, the Updater complains that the ID isn't a match, i updated it to the one you provided and it does NOT work.
---------- Post added at 03:02 PM ---------- Previous post was at 02:57 PM ----------
maxupp said:
Not working, the Updater complains that the ID isn't a match, i updated it to the one you provided and it does NOT work.
Click to expand...
Click to collapse
And another thing: Why do you link a Brightstar RUU? Shouldn't this be an unbranded RUU?
OP,
Please add big warning in your post about dangers of changing MID. You must specifically warn about not messing up any character in command line. :good::good:
09Ram said:
OP,
Please add big warning in your post about dangers of changing MID. You must specifically warn about not messing up any character in command line. :good::good:
Click to expand...
Click to collapse
And he should change it to Super CID to be on the safe side.
---------- Post added at 03:52 PM ---------- Previous post was at 03:35 PM ----------
Adding to my statement above:
Using the RUU posted in the OP, it is NOT possible to install the 5.0.1 update.
I just downloaded it and was informed that i cannot update because the OS has been modified.
Please remove this entire thread or update the OP to be correct.
No problem with OP, follow instructions and everything works like a charm. Wish I had known RUU's wipe internal memory though
Many, many thanks! It worked out just perfectly! There is the OTA notification, great
Well, ill try this on a different computer because after doing "fastboot oem rebootRUU", tried to run the exe file but nothing happened (it kinda installed but it closes without any warning or any confirmation) . Now im stuck at the bootloader only saying RUU. Any tips?
maxupp said:
Not working, the Updater complains that the ID isn't a match, i updated it to the one you provided and it does NOT work.
---------- Post added at 03:02 PM ---------- Previous post was at 02:57 PM ----------
And another thing: Why do you link a Brightstar RUU? Shouldn't this be an unbranded RUU?
Click to expand...
Click to collapse
Works perfectly fine, Obviously did something wrong. Brightstar RUU is unbranded. and only 1 i could find for Developer Edition.
09Ram said:
OP,
Please add big warning in your post about dangers of changing MID. You must specifically warn about not messing up any character in command line. :good::good:
Click to expand...
Click to collapse
Done!
maxupp said:
And he should change it to Super CID to be on the safe side.
---------- Post added at 03:52 PM ---------- Previous post was at 03:35 PM ----------
Adding to my statement above:
Using the RUU posted in the OP, it is NOT possible to install the 5.0.1 update.
I just downloaded it and was informed that i cannot update because the OS has been modified.
Please remove this entire thread or update the OP to be correct.
Click to expand...
Click to collapse
Super CID didn't work for me, Using the RUU in OP it work's fine, i did it myself and others confirmed it worked. Make sure you don't have a custom recovery and haven't modified the system. the screenshots in the 2nd post is from the RUU that is linked on OP the MID and CID from the OP aswell!
bazzi12 said:
No problem with OP, follow instructions and everything works like a charm. Wish I had known RUU's wipe internal memory though
Click to expand...
Click to collapse
Thanks, glad it worked, Added to OP about wiping RUU (although i did mention it in a previous post already). leave a press on the thanks if you haven't already
Tilgi said:
Many, many thanks! It worked out just perfectly! There is the OTA notification, great
Click to expand...
Click to collapse
Thanks, Glad it worked, leave a press on the thanks if you haven't already
--------------------
maxupp said:
Please remove this entire thread or update the OP to be correct.
Click to expand...
Click to collapse
ADDITIONALLY I AM NOT SOME NOOB ON XDA SO DON'T TREAT ME LIKE ONE AND INSTEAD RESPECT OTHER MEMBERS. DO NOT TELL ME WHAT TO DO! JUST CUZ IT DIDN'T WORK FOR YOU DOESN'T MEAN IT DOESN'T WORK FOR EVERYONE ELSE
diogoribeiro said:
Well, ill try this on a different computer because after doing "fastboot oem rebootRUU", tried to run the exe file but nothing happened (it kinda installed but it closes without any warning or any confirmation) . Now im stuck at the bootloader only saying RUU. Any tips?
Click to expand...
Click to collapse
disable anti-virus and run as admin. official HTC software so no risk of virus.
It worked fine for me.
Installed easily and took 5.0.1 OTA right after setup was complete.
Only problem I'm having now is that I am unable to boot TWRP through ADB to backup recovery.
After running cmd "fastboot boot TWRP.img" It downloads fine, then command says booting, but nothing happens and phone is stuck on bootloader screen. Any suggestions?
HBoot 3.19
I tried to follow your instructions and below was my result when i tried changing the MID to developer. I was on developer edition rom already, but i had the international MID. my phone is an AT&T variant. I changed MID's so x.xx.401.x stock rom would accept OTA's without a problem. i changed my MID back when i was on either 1.12 or 1.54 base, i dont remember. Now the OTA for 4.16 does not install. installing from android, it keeps saying download is corrupt. installing from recovery simply throws an unknown error. my guess is the MID being messed up. any information is greatly appreciated. in the meantime, im on 3.28 and the phone functions correctly for now at least.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.21331147A1.19_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.1540.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT********** [edited for obvious reasons]
(bootloader) imei: xxxxxxxxxxxxxxx [also edited]
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000n.satn tnwo ot53
amns
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Click to expand...
Click to collapse
chevyjohn01 said:
It worked fine for me.
Installed easily and took 5.0.1 OTA right after setup was complete.
Only problem I'm having now is that I am unable to boot TWRP through ADB to backup recovery.
After running cmd "fastboot boot TWRP.img" It downloads fine, then command says booting, but nothing happens and phone is stuck on bootloader screen. Any suggestions?
Click to expand...
Click to collapse
you can't fastboot boot twrp any more you will need to fastboot flash recovery twrp.img
fma965 said:
disable anti-virus and run as admin. official HTC software so no risk of virus.
Click to expand...
Click to collapse
Well, couldnt make it work on this computer. Used another and everything went smothly, maybe i had a bad download or something on my computer was blocking the program from even starting. Thank you for your quick reply and for your amazing job i really appreciate it.
diogoribeiro said:
Well, couldnt make it work on this computer. Used another and everything went smothly, maybe i had a bad download or something on my computer was blocking the program from even starting. Thank you for your quick reply and for your amazing job i really appreciate it.
Click to expand...
Click to collapse
Great, glad you got it working hit the thanks button if you want
Hello folks,
as for me such guides were really helpful in the past, and there are alway poeple who are new to a device and modding it, I decided to do one on my own, to show you how to perform a reset of your HTC U11 to Full Stock ROM/Firmware.
In many points I tried carrying together all that has been written down prior to this guide in many others, by many others. Thus I - in some kind - just consolidate the fact, using my own words and a little bit different structure than others. Anyway I'll show you my steps again in this tutorial as I think it is of importance to many that they can read the hole to do in one thread. But I advise everyone.
Please note that I will not accept any responsibility for possible occurring bricks. I can only confirm that this tutorial has been used by me, for my specific unit and all went successful.
Look here for [Collection] HTCU U11 – RUU/Firmware/Recovery/OTA/Backups
Regards
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Restore using a Nandroid Backup
Restore using a RUU
Knowledge of adb/fastboot
htc_fastboot and adb installed
HTC U11
07 RU_CID_FAIL: CID in android-info.txt does not match your phone’s CID
10 RU_MODELID_FAIL: MID in android-info.txt does not match your phone’s MID
12 SIGNATURE FAIL: phone expects an HTC signature and can't find one; or found a wrong one
22 RU_HEADER_ERROR: something wrong with your zip; check md5 of download
23 PARSING IMAGE FAIL: something wrong with the image within the zip
24 ANDROID-INFO FAIL: something wrong with android-info.txt within the zip
32 HEADER ERROR: the zip couldn't be read and unzipped properly; seems same as 22.
33 NOT KNOWN YET: might indicate hardware failure.
35 FAILED (remote: 35 RU_PARTITION_NOT_SUPPORT <PartitionName>): means you can’t flash an image in download mode, as it has to be done in bootloader mode.
41 WRONG MODEL ID: means the RUU is menat for a different device
42 WRONG CUSTOMER ID: means you got to swap CID first
90 PRE-UPDATE FAIL: means it only flashed aboot and you have to run the process again immediately to flash all other partitions. The htc_fastboot.exe now auto-reboots on Error 90!
99 UNKNOWN: usually indicates you are S-ON, but sometimes also recognizes other Security related issues.
130 WRONG MODEL ID: see 41
155 INDICATES DIFFERENT THINGS:
the need to relock bootloader; if S-ON
the RUU cannot be executed, because the software versions of ROM, Firmware and RUU aren't matching
170 CHECK USB: RUU won’t run because ADB isn't working properly
171 USB ERROR: happens all the time when the RUU reboots the phone to download mode. For some reason the device is losing its connection and making a RUU flash virtually impossible . There is an incompatibility between USB 3/3.1 and Fastboot/ADB, as well as an issue with Windows Device Detection on the newer Windows 10 builds.
171 USB ERROR FIX by @Sneakyghost:
How to fix RUU error 171 on Windows 10x64 easily
System: Win 10 Redstone (1607) x64 with Intel based USB3.0 and USB2.0 ports:
Sync Manager from HTC Website
Imported Reg-File from Post #1
Reboot
Click to expand...
Click to collapse
Restore using a Nandroid
flash TWRP custom recovery
download custom recovery at https://twrp.me
reboot to download mode
Code:
adb reboot download
flash recovery image
Code:
htc_fastboot flash recovery nameoftwrp.zip
Restore your Nandroid. If you got none yourself, it might be possible that you’ll find one here.
unzip the according Nandroid
copy Nandroid to TWRP/Backup/SerialNo/Nameofbackup on your extSD
restore Nandroid by using TWRP > RESTORE and choosing above copied Nandroid
Flash incremental OTA firmware
reboot to download mode
perform
Code:
htc_fastboot getvar all
and note down your original software version
download all incremental OTA firmwares to your PC, starting with the one above your current firmware version, up to the software version number of your above choosen Nandroid Backup (ATTENTION: If you are S-OFF it will suffice to download the latest Incremental OTA as well as the latest Combined Full Wipe firmware according to the above choosen Nandroid Backup)
flash all incremental OTA firmwares – one after another – following the below named steps (ATTENTION: If you are S-OFF you start with the Combined FullWipe, and proceed with the Incremental OTA one, to ensure that you’ll be able to receive upcoming OTA updates)
Code:
htc_fastboot flash zip nameoffirmeware.zip
(ATTENTION: this has to be done twice to comlete, and it will flash full firmware, thus TWRP will be replaced by stock recovery)
As soon as you restored the Nandroid and flashed all incremental firmware file up to the current build number of your Nandroid, that's it. Your are now Full Stock again!
Restore using a RUU
reboot to download mode
perform
Code:
htc_fastboot getvar all
and note down your original software version
download the latest Stock RUU for your device over here.
flash your RUU to revert to stock
rename RUU to 2PZCIMG.zip
copy 2PZCIMG.zip to root directory of SD card
reboot to download mode
press Volume Up button to confirm flash of RUU
As soon as your RUU has been flashed sucessfully, that's it. Your are now Full Stock again!
Reserved just in case
Thanks you for this Always needed thread
Is it possible to install a non-branded RUU on a branded device, but otherwise keep things completely stock?
Zico 10 said:
Is it possible to install a non-branded RUU on a branded device, but otherwise keep things completely stock?
Click to expand...
Click to collapse
Not possible for as long as S-OFF isn't available. Will do a de-branding thread as soon as it becomes available.
Sent from my htc_ocnuhl using XDA Labs
deleted
Will this wipe my data?
5m4r7ph0n36uru said:
Not possible for as long as S-OFF isn't available. Will do a de-branding thread as soon as it becomes available.
Click to expand...
Click to collapse
Dying to unbranded my HTC U11 as well...
Will the bootloader say "Relocked" or "Locked" if i use this method and restore it to stock?
Sorry for the basic question.. Its been a long time used a HTC phone.
rkrishnamurthy said:
Will the bootloader say "Relocked" or "Locked" if i use this method and restore it to stock?
Sorry for the basic question.. Its been a long time used a HTC phone.
Click to expand...
Click to collapse
It will say relocked. A real locked state might be possible if S-OFF hits, but no way to do it until then.
Sent from my htc_pmeuhl using XDA Labs
Nice info when in the future want to go back to stock.
Sent from my HTC U11 using XDA Developers 2016 Premium
Hi,
I'm new to android. I was advised to root my HTC U 11 but after doing so and exploring options I decided I'd rather just remove root and return to stock. However, I'm a noob and didn't do a backup before flashing the recovery and rooting. I found this thread and it seems to have what I need but I'm hesitant to take the next step as I don't want to brick my new phone. Can someone explain what I need to do to return to stock in as simple/dumbed down way as possible?
It's a single sim variant, carrier is Optus (Australia) and the original software version was 1.03.710.7
There's only this step by step guide. Couldn't be more precise at what to do. If you don't understand such a detailed guide I'm a little bit irritated at why you rooted in the first part, if you don't know what happens by doing so and how to revert back properly
Sent from my htc_pmeuhl using XDA Labs
5m4r7ph0n36uru said:
There's only this step by step guide. Couldn't be more precise at what to do. If you don't understand such a detailed guide I'm a little bit irritated at why you rooted in the first part, if you don't know what happens by doing so and how to revert back properly
Sent from my htc_pmeuhl using XDA Labs
Click to expand...
Click to collapse
i've did all the steps and still my bootloader will not relock with the RUU method.
Stock RUU flash not working, her is fail message. Any ideas?
Error code 19 RU_MAIN_VER_FAIL os-version in android-info missing or i
mr573162 said:
i've did all the steps and still my bootloader will not relock with the RUU method.
Click to expand...
Click to collapse
RUU any method does not relock bootloader, you have to manually do it in fastboot. Download mode, CMD type fastboot oem lock
---------- Post added at 08:31 AM ---------- Previous post was at 08:27 AM ----------
andybg40 said:
Stock RUU flash not working, her is fail message. Any ideas?
Error code 19 RU_MAIN_VER_FAIL os-version in android-info missing or i
Click to expand...
Click to collapse
Are you flashing the correct RUU?
schmeggy929 said:
RUU any method does not relock bootloader, you have to manually do it in fastboot. Download mode, CMD type fastboot oem lock
---------- Post added at 08:31 AM ---------- Previous post was at 08:27 AM ----------
Are you flashing the correct RUU?
Click to expand...
Click to collapse
Yes I have tried the command of fastboot oem lock and it tells me failed unknown command.
C:\adb>fastboot oem lock
...
FAILED (remote: unknown command)
finished. total time: 0.004s
mr573162 said:
Yes I have tried the command of fastboot oem lock and it tells me failed unknown command.
C:\adb>fastboot oem lock
...
FAILED (remote: unknown command)
finished. total time: 0.004s
Click to expand...
Click to collapse
You really doing it in download mode, or are you in bootloader?!
Sent from my htc_pmeuhl using XDA Labs
Posting a new thread was my last resort, so here goes.
I'm looking for a TWRP recovery for a HTC One M9e PCE. It's obviously a rarer model so finding stuff for it is incredibly hard. While searching the forum I came to the conclusion that there once was a file named twrp-3.0.0.2-HIMAR.img hosted on androidfilehost. But all the links are dead.
Does anyone have a copy of that image lying around? I would greatly appreciate if someone would upload it again. If I'm not mistaken the author of that recovery was mars3712, if that helps.
EDIT: I'm aware that there's a repo on github also, though unfortunately it's on a 5.1 base. The device in question is 6.0 MM. Would it matter?
http://www.mediafire.com/folder/2wd1oprpj5ija/HTC_M9_PCE
twrp-3.0.2-0-himar2.img and twrp-3.0.2-1-himar2.img
Click to expand...
Click to collapse
both working perfect on my HTC M9 PCE better use newer
in 10min in folder will be uploaded
2PRGIMG_HIMAR_ML_UHL_M60_SENSE70GP_HTC_Europe_2.32.401.1_Radio_1.1550V70.2508.0304_HU[W.T]_release_488703_combined_signed_2_4.zip
Click to expand...
Click to collapse
to install from sd format sd download rom rename to 2PRGIMG.zip place on sd power and vol- (or + dont remember) and rom should install auto in download mode
Amazing, thanks for the upload. Apparently I need S-OFF to flash this. I've flashed some janky TWRP on this phone before and it never needed S-OFF. Any thoughts? Already running the ROM you posted.
Code:
[email protected]:~/Downloads$ sudo fastboot flash recovery twrp-3.0.2-1-himar2.img
target reported max download size of 134217728 bytes
sending 'recovery' (13544 KB)...
OKAY [ 0.753s]
writing 'recovery'...
(bootloader) Image verification failed...
FAILED (remote: Err! Stop flashing due to S-ON...
)
finished. total time: 1.395s
You unlock bootloader at htcdev.com right?
I will back home in 2/3 hours and look on problem
GeoEgbA said:
You unlock bootloader at htcdev.com right?
I will back home in 2/3 hours and look on problem
Click to expand...
Click to collapse
Yes, the phone is unlocked.
Sorry just back home 2days away. So you must relock bootloader fastboot oem lock restart phone and again unlock bootloader but may use Unlock_code.bin if you have it from first unlock, if no then again generate it on htcdev
I did 2 tests, install clean rom from sd (2PRGIMGizip) and after try flash recovery and get same error as you, one dev i have s-on seccond s-off in both case after flash rom do
fastboot oem lock
Click to expand...
Click to collapse
then
fastboot flash unlocktoken Unlock_code.bin
Click to expand...
Click to collapse
I used old tocken from first unlocking and after this
htc_fastboot flash recovery twrp-3.0.2-1-himar2.img
Click to expand...
Click to collapse
and work perfect in both case
So lock and relock bootloader
Try this and give feedback if all ok, i didnt sleep over 50h so my english grama may be little wrong
Will check here in fiew hs now i go rest.
GeoEgbA said:
Sorry just back home 2days away. So you must relock bootloader fastboot oem lock restart phone and again unlock bootloader but may use Unlock_code.bin if you have it from first unlock, if no then again generate it on htcdev
I did 2 tests, install clean rom from sd (2PRGIMGizip) and after try flash recovery and get same error as you, one dev i have s-on seccond s-off in both case after flash rom do
then
I used old tocken from first unlocking and after this
and work perfect in both case
So lock and relock bootloader
Try this and give feedback if all ok, i didnt sleep over 50h so my english grama may be little wrong
Will check here in fiew hs now i go rest.
Click to expand...
Click to collapse
Hello, do you happen to have the different region (CID HTC__621) RUU for my HTC One M9s (himaruhl)? Thank you very much!
Thanks for the information you provided
---------- Post added at 01:35 PM ---------- Previous post was at 01:28 PM ----------
I have installed twrp data password