Hello all. I'm trying to solve this problem for more then 3 hours and I'm really starting to have a headache from all of it.
When I call someone or someone calls me I can't hear the person on the other side, but they can hear me with no problem. How to fix this?
I already did a Factory Reset and that didn't help, I tried connecting and disconnecting my headphones and the problem was still there. I don't care about LTE compatibility.
Phone specs are:
Android version: 4.2.2
Baseband version: .48
Bootloader:MAKOZ10o
Build number: JDQ39
I didn't update anything on my phone, it came with that software installed. I just rooted it and nothing else.
EDIT: I think this is important too so I will add it. At one time the earpiece speaker did work, the in stopped so I did a Factory Reset and it didn't help. When I plugged in and out my headphones, it was fixed. Later, it got broken again, but now I can't fix it with plugging my headphones in and out.
EDIT 2: So I read on the Internet that I can downgrade to a older Android version and that then the problem will be fixed. My question is, to what version and what functionality will I lose?
EDIT 3: Updating to radio .54 fixed the issue. Thank you for helping.
This may sound stupid but...... did you check the volumes?
zephiK said:
This may sound stupid but...... did you check the volumes?
Click to expand...
Click to collapse
Yes, it's all the way up.
Well your baseband is fine assuming you didn't try any LTE hacks (which you're on .33+ so you probably didn't). Stock rom, stock kernel?
What else did you do?
zephiK said:
Well your baseband is fine assuming you didn't try any LTE hacks (which you're on .33+ so you probably didn't). Stock rom, stock kernel?
What else did you do?
Click to expand...
Click to collapse
I only rooted my phone and installed a couple apps and games. I didn't fiddle with the settings too much as I didn't want to break my phone.
Help me ,please
Hello,I have the same problem ,i'm from argentina
And i bought in USA, from google play without contract.
Please can you tell me, where can i to obtain the baseband version .54 for update my baseband?
My phone is android version: 4.2.2
Baseband version: .48
Bootloader:MAKOZ10o
Build number: JDQ39
Any thread ? Thanks
Related
Hello guys. I just had an unexpected problem. i finally managed to install custom firmware (miui to be exact) and i have A BIG PROBLEM!!!
When i press the power button, in order to lock in, my phone just shuts down!
I tried installing different versions of miui, I even installed CM to to test.. but problem still apears. This means i cant use any custom firmwares, except standart one.
I saw many comments, that people saying it works and etc. but mine lock in button just shuts down the whole phone.
The phone is stock bought, and what I did, is just installed CW on it.
P.S. I saw that one guy had the same problem, but with the u8800 not-pro model. He said that fixed firmware solved the problem. So what should i do? is it my phone's problem or custom firmware needs fix?
Huawei u8800pro
Android Version: 2.2.2
Kernel Version: 2.6.32.9-perf
Build number: 203026
Please, i beg you, help someone! Give atleast a tip or smth, I would appreciate any help.
furyen said:
Hello guys. I just had an unexpected problem. i finally managed to install custom firmware (miui to be exact) and i have A BIG PROBLEM!!!
When i press the power button, in order to lock in, my phone just shuts down!
I tried installing different versions of miui, I even installed CM to to test.. but problem still apears. This means i cant use any custom firmwares, except standart one.
I saw many comments, that people saying it works and etc. but mine lock in button just shuts down the whole phone.
The phone is stock bought, and what I did, is just installed CW on it.
P.S. I saw that one guy had the same problem, but with the u8800 not-pro model. He said that fixed firmware solved the problem. So what should i do? is it my phone's problem or custom firmware needs fix?
Huawei u8800pro
Android Version: 2.2.2
Kernel Version: 2.6.32.9-perf
Build number: 203026
Please, i beg you, help someone! Give atleast a tip or smth, I would appreciate any help.
Click to expand...
Click to collapse
oh, sorry, bad me. posted it in the wrong place. got lost in the website. sorry again.
Return to original froyo rom
Update to stock gingerbread b512 rom
Then install miui cm7 etc....
Hello everyone. long time lurker, first time poster.
To make a long story short, I had a gs4 since june 2013, but last week I got mad and threw it at a wall. (stupid, huh) The phone still works, but the calling functionality is screwed to high hell: I cant hear them and they cant hear me. also, no dial tone.
Anyways, I got a new one today through rogers device protection and as I was updating and installing app, software, and my prefernces, I misconfigured an xposed module and got stuck in a bootloop.
I reflashed my phone with what seemed to be the correct firmware, but i guess not after reading different posts similar to this one. I think I used the correct firmware, but not the correct PIT file. the filename of the mdf is : I337MVLUAMDJ_I337MOYAAMDJ_I337MVLUAMDJ_HOME.tar.md5 also, the PIT file was from wind, but I only saw that after flash.
On this new phone, I have no sound and no wifi. I cant test calling functionality as I dont have the signal to do so, But I still have basic 4g connectivity by testing youtube, and sms works perfectly.
For record's sake, it's from rogers.
Model: SGH-1337M
Android version: 4.2.2
Build Number: JDQ39.1337MVLUAMDJ
Kernel Version: 3.4.0-517283
[email protected] #1
EDIT: The original SW Ver. Is 1337MVLUFNE1, so I definitely got the wrong rom on here. I found the same rome version on google, so off to odin I go
If anyone could help me, I will be forever grateful. Also, if more information is required, I have the original packaging from both phone and I still have the original phone, so ask away.
Thanks,
Reach
Yes, this has probably been gone over ad nauseum throughout the site. Due to time constraints I cannot dig through the forums as much as I'd like, so I'm simply going to ask.
Phone: Samsung Note III (SM-N900V)
Carrier: Verizon Wireless
OS Version: 4.4.2
Baseband Version: N900VVRUCNC4
Kernal Version: 3.4.0
Build Number: KOT49H.N900VVRUCNC4
Hardware Version: N900V.07
It was purchased November 2013 with OS 4.3. Over the summer I accepted the OTA update to 4.4.2. My phone went to hell. Battery gets chewed through like a woodchipper, phone is horribly laggy, antenna connection is always 1-2 bars under where it was prior to update (and doesn't get reception in areas it did before), changes to the UI are less than desirable, etc.
The phone was never rooted, as this was the first phone I've ever had that worked well enough on stock software that I skipped it.
After giving it a few months on the update and trying changes/tweaks within the updated stock software to fix the issues the update caused, I'm at the end of my patience. Contacting support at both Verizon and Samsung was pointless, with one blaming the other for the problems.
What I'd love is to take the OS back to 4.3 and leave it, but in lieu of that I want to root the hell out of it and put a build on without these issues and a better antenna software. I'd prefer not to void the KNOX, but at this point I'd microwave it if it'd help.
I have no backups or root access from before the update to base a root on. I tried towelroot; install button doesn't work and I understand the maker Geohot works for Google now. I started to play with Odin, however the install seems to have an oddly high amount of other software it wants to install, and even after declining those it doesn't want to install (tried 3.09 and 3.10, I'm using Windows 7 w/latest SP and updates). Also, it drives my AV software crazy, so even turning that off and working with it didn't get me very far.
So, at this point, I'm open to most anything to get this crap off my phone, and my only requirement is that I don't brick it.
Options?
Thanks in advance for any help.
HarlockTaliesin said:
Yes, this has probably been gone over ad nauseum throughout the site. Due to time constraints I cannot dig through the forums as much as I'd like, so I'm simply going to ask.
Phone: Samsung Note III (SM-N900V)
Carrier: Verizon Wireless
OS Version: 4.4.2
Baseband Version: N900VVRUCNC4
Kernal Version: 3.4.0
Build Number: KOT49H.N900VVRUCNC4
Hardware Version: N900V.07
It was purchased November 2013 with OS 4.3. Over the summer I accepted the OTA update to 4.4.2. My phone went to hell. Battery gets chewed through like a woodchipper, phone is horribly laggy, antenna connection is always 1-2 bars under where it was prior to update (and doesn't get reception in areas it did before), changes to the UI are less than desirable, etc.
The phone was never rooted, as this was the first phone I've ever had that worked well enough on stock software that I skipped it.
After giving it a few months on the update and trying changes/tweaks within the updated stock software to fix the issues the update caused, I'm at the end of my patience. Contacting support at both Verizon and Samsung was pointless, with one blaming the other for the problems.
What I'd love is to take the OS back to 4.3 and leave it, but in lieu of that I want to root the hell out of it and put a build on without these issues and a better antenna software. I'd prefer not to void the KNOX, but at this point I'd microwave it if it'd help.
I have no backups or root access from before the update to base a root on. I tried towelroot; install button doesn't work and I understand the maker Geohot works for Google now. I started to play with Odin, however the install seems to have an oddly high amount of other software it wants to install, and even after declining those it doesn't want to install (tried 3.09 and 3.10, I'm using Windows 7 w/latest SP and updates). Also, it drives my AV software crazy, so even turning that off and working with it didn't get me very far.
So, at this point, I'm open to most anything to get this crap off my phone, and my only requirement is that I don't brick it.
Options?
Thanks in advance for any help.
Click to expand...
Click to collapse
This is the best breakdown of what you need to do. Click here, scroll till you see the blue outline for NC4 OTA.
Be sure to hit "thanks" on @az_biker link for this tutorial!
Unfortunately this won't work, I've already tried. When running the towelroot installer the Install button is not clickable. The other buttons function normally.
Op did you ever hey the note rooted....did you get the towel root to work
chefb said:
Op did you ever hey the note rooted....did you get the towel root to work
Click to expand...
Click to collapse
No to both, unfortunately.
I've had no issues with towelroot. But for giggles make sure you have install from unknown source checked, and then unlock your developer options and make sure USB debug is enabled, then give it another shot.
Sent from my Baja'd 4.4.2 Note 3
cjamison08 said:
I've had no issues with towelroot. But for giggles make sure you have install from unknown source checked, and then unlock your developer options and make sure USB debug is enabled, then give it another shot.
Sent from my Baja'd 4.4.2 Note 3
Click to expand...
Click to collapse
did you take a ota
I have not, since the leaked NC2 firmware was leaked out. However on my s4 I just used towelroot with the latest NC5 firmware, and it worked flawlessly.
Sent from my Alliance 4.4.2 Note 3
hi, I have an i9505 which I recently restored to stock (I previously had cm12.1). I flashed germany 4.4.2 kitkat and it worked fine.
I did all the updates using OTA, which at the end updates the phone to 5.0.1. Now I have the latest version (XXUHOH2), but I noticed that the back button doesn't work anymore, it doesn't even light up when I press it. The menu button works fine instead. I factory restored the phone through official recovery but it didn't change anything. Is it possible that the back button suddenly stopped working after I updated to the latest version because of an hardware failure, or is it a software problem? The phone hasn't dropped off the table once, and even with the first lollipop update the button worked.
i solved this issue by installing another firmware (XYHOE1)... it seems that my phone doesn't like the german one
Hi. I am having the same issue. I got the OTA update today and 5.0.1 was successfully installed on my phone. However, after the reboot, the back button stopped working and wont even light up. Is there any workaround aside from installing that firmware that you mentioned?
Will surely appreciate your response.
I haven't found a workaround, i tried both normal and black edition OH2 but the issue remains the same... however I flashed a custom firmware (and thus keeping OH2 bootloader and modems) and it works perfectly... so I think it's a bug found in OH2 firmwares which happens in some phones... flashing previous version of any firmware should fix the issue.
mIRChele said:
i solved this issue by installing another firmware (XYHOE1)... it seems that my phone doesn't like the german one
Click to expand...
Click to collapse
Can you give us a link for that firmware? I can't find that firmware anywhere. Thanks!
The latest firmware official for Gt-i9505 Germany (DBT) is this ONE.
mIRChele said:
hi, I have an i9505 which I recently restored to stock (I previously had cm12.1). I flashed germany 4.4.2 kitkat and it worked fine.
I did all the updates using OTA, which at the end updates the phone to 5.0.1. Now I have the latest version (XXUHOH2), but I noticed that the back button doesn't work anymore, it doesn't even light up when I press it. The menu button works fine instead. I factory restored the phone through official recovery but it didn't change anything. Is it possible that the back button suddenly stopped working after I updated to the latest version because of an hardware failure, or is it a software problem? The phone hasn't dropped off the table once, and even with the first lollipop update the button worked.
Click to expand...
Click to collapse
Please help me. I'm experiencing the same issue. I updated my phone to OH2 and after it finished updating, my back and menu button stopped functioning. Then received another update (OJ2) via Kies3, hoping that it will solve the issue I encountered in OH2 but nothing has changed. And now I downgraded my phone to a previous version of Lollipop (OC6) and it still not working.
Before updating my phone, I know and I'm sure my back and menu buttons are working fine that moment and like you, I haven't dropped my phone since I bought it so I'm sure this isn't a hardware problem. :crying::crying: Please help me. A big THANKS! :good:
sharinganxyeah said:
Please help me. I'm experiencing the same issue. I updated my phone to OH2 and after it finished updating, my back and menu button stopped functioning. Then received another update (OJ2) via Kies3, hoping that it will solve the issue I encountered in OH2 but nothing has changed. And now I downgraded my phone to a previous version of Lollipop (OC6) and it still not working.
Before updating my phone, I know and I'm sure my back and menu buttons are working fine that moment and like you, I haven't dropped my phone since I bought it so I'm sure this isn't a hardware problem. :crying::crying: Please help me. A big THANKS! :good:
Click to expand...
Click to collapse
Same problem for me. i tried even a Pit reflesh and dowgrade.
Same thing happened to me. I did the upgrade today, 24th Nov 2015, to Android 5.0.1 - Baseband versionXXUHOJ2 and my menu and back keys are gone. Very infuriating! Will Samsung fix this, or do I have to spend hours of my own time?
I have found a workaround, not ideal but helps short term. Go to Settings > My Device >Accessibility >Dexterity and interaction. Then switch on the Assistant menu. That gives you a little pop up square - available all the time - with 12 buttons including BACK and MENU.
I'm having the same issue. I came back to Kit kat coz I'm tired of Lollipop :silly:
same prb with me...i just updated my s4 to 5.0.1 everything is working fine but the back n menu keys are not working plz give me a solution to this problem
same problem
i back to 4.4.2 stock rom but still not workin -_- help guys
Phone's Touch key FW version: 0x10
Part's Touch key FW version: 0x12
I'v got the same problem.. I update my i9505 and buttons not working.. i flash with other firmware but still not working. plz guys help me
I wrote to Samsung to explain the problem. They know about it. They answered that they will fix the problem in the next update. Relax guys
Joku1981 said:
I wrote to Samsung to explain the problem. They know about it. They answered that they will fix the problem in the next update. Relax guys
Click to expand...
Click to collapse
I'm just a little bit calm, but surely to update we must wait a long time
vanDurka said:
I'm just a little bit calm, but surely to update we must wait a long time
Click to expand...
Click to collapse
I'm not going to move of Android 4.4.2.
very thanks Joku1981 i wait for a update my button still not working
code *#2663#
before flashing and touch button key working :
Phone's Touch key FW version: 0x10
Part's Touch key FW version: 0x10
after flash a update 5.0.1 : touch button key not working.
Phone's Touch key FW version: 0x10
Part's Touch key FW version: 0x12
Joku1981 said:
I wrote to Samsung to explain the problem. They know about it. They answered that they will fix the problem in the next update. Relax guys
Click to expand...
Click to collapse
Joku1981 said:
I'm not going to move of Android 4.4.2.
Click to expand...
Click to collapse
I will try, and waiting for more informations
goodluck
Any updates or solutions as yet please?
I had a perfectly working Galaxy S4 (GT-I9505), then after a recent update was pushed out, the softkeys now do not function. Soooo frustrating...... my confidence in Samsungs' Updates are now dented, I shall seriously think twice about allowing any updates through.
After updating to Android 6.0.1, the phone is randomly losing mobile and gps signal. It happens about 30-40 times a day, especially when moving around, like driving . Almost every time I look at my phone, I see "No service, network not found" or "gps lost" messages. After about 10 seconds, the signal comes back and everything is ok again. Very annoying and impossible to use navigation apps, like Waze and Google Maps. I have made a soft reset, a hard reset, wiped all data and cleared the phone cache, checked and cleaned the Sim card. Nothing helps. Before update the phone worked brilliantly. Also noticed, that the signal won't drop when using wifi, the problem occurs only when data connection is on. And I'm not the only one, I have 2 friends with the same phone and the same problem. Looks like a software issue. Can somebody help?
PS. I'm from Estonia, and the software version is G901FXXU1CPE1/G901FBAL1CPE1
Thank you in advance...
Hi mate,
I Have the same device although mine uses a custom ROM but the problem I experienced was exactly like yours
Samsung released a new issue of the 6.0.1 for our phone, PDA G901FXXU1CPF6 CSC G901FPHN1CPF2 you can login to the sammobile site and download it
As I said above I have a custom ROM so I only flashed the modem firmware from that release and worked fine after that!
Hope that will help you!
Thanks for your response! But I'm using a totally stock phone and I see, that this firmware is for Netherlands. Does it work on my phone or I have to wait until the Baltic version is released?
MirandoKersman said:
Thanks for your response! But I'm using a totally stock phone and I see, that this firmware is for Netherlands. Does it work on my phone or I have to wait until the Baltic version is released?
Click to expand...
Click to collapse
Hello,
I don't see any reason why it wouldn't work but just in case make a note of your Access point name settings in the mobile networks tab just to make sure that everything is the same after you flash the new release .
If you follow the steps as described in the sammobile site you won't have any problems.
What I have noticed however is that after I flashed the new modem firmware the mobile hotspot does not work anymore but this has to do with my custom ROM.
It worth trying though the performance of the phone after that is exceptional and the signal strength is higher than before and most importantly, doesn't crash anymore..
Let me know if you need help and keep me posted about your results!
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Randi said:
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Click to expand...
Click to collapse
Baseband:
G901FXXU1CPE1, I have a totally stock phone with the latest official firmware.
Latest official firmware from where? ("latest" is region dependent)
Ok, the cph firmware updated the baseband to cph, on my side it's only been a while 14 hrs since flashing but it seems the signal problem is finally fixed
Randi said:
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Click to expand...
Click to collapse
From what I understand it doesn't matter which ROM you are using the baseband is the one that causing this problem..
As I said I have a custom ROM and when I had the CPE1 baseband then I had all these problems.
If you flashed the ROM and your baseband is still CPE1 then something did not go per plan I think..
After flashing ONLY the modem firmware from the CPF6 release to my SMG901F is reported that the baseband version is CPG2 however..
This version works for sure..
I might try the CPH9 release now to see if the issues i have with the mobile hotspot will be solved
George A. said:
From what I understand it doesn't matter which ROM you are using the baseband is the one that causing this problem..
As I said I have a custom ROM and when I had the CPE1 baseband then I had all these problems.
If you flashed the ROM and your baseband is still CPE1 then something did not go per plan I think..
After flashing ONLY the modem firmware from the CPF6 release to my SMG901F is reported that the baseband version is CPG2 however..
This version works for sure..
I might try the CPH9 release now to see if the issues i have with the mobile hotspot will be solved
Click to expand...
Click to collapse
I'll try to install that CPH9 release too. Let's see what happens, because I have tried everything else.
To me it seems, that this CPE1 version is having problems with switching between network modes. I checked, that in Settings- Mobile networks- Network mode is set to LTE/3G/2G (automatic connect), but I haven't seen H+, H or Edge symbols on top of the screen. Only 4G/4G+ or no reception at all. Like it's locked in 4G network or something. And sometimes when there is no 4G network coverage, there is also no signal. But that is just my logic...
Ok, I flashed the latest CPH9 firmware and my baseband changed to CPH3. CSC Country turned to Netherlands instead of Baltic. And it seems that the issue is fixed!
I made a little test, I went to the cellar to get bad 4G reception and instead of showing No Service, 4G turned to H without losing the cell signal. Let's wait and see...
Thank you guys a lot for your help! :good:
Hi
1) I have the latest PHN version for SM-G901f stock& rooted. I see the TPD version, will it have dutch language if i flash it ( without wipe anything) in ODIN?
2) What does TPD stand for anyway?
I want to do this because i see TPD has latest security_patch sept 1
With rooted Phone there is no way (as far as i know (3) ) to get security updates without getting the message it as screenshot given under here....
I can confirm that the issue has been fixed for me as well! ****ing finally! :cyclops:
Btw it will not switch to Dutch
MirandoKersman said:
After updating to Android 6.0.1, the phone is randomly losing mobile and gps signal. It happens about 30-40 times a day, especially when moving around, like driving . Almost every time I look at my phone, I see "No service, network not found" or "gps lost" messages. After about 10 seconds, the signal comes back and everything is ok again. I have made a soft reset, a hard reset, wiped all data and cleared the phone cache, checked and cleaned the Sim card....
PS. I'm from Estonia, and the software version is G901FXXU1CPE1/G901FBAL1CPE1
Thank you in advance...
Click to expand...
Click to collapse
I'm from Indonesia and buy used g901f from singapure,
I have same problem with marsmallow latest update too
My software version is G901FXXU1CPH3/G901FOLB1CPH1/G901FXXU1CPH1
How to fix it? Step by step..
Thank you before..
*) sorry for my bad english
---------- Post added at 01:43 AM ---------- Previous post was at 01:36 AM ----------
Randi said:
I can confirm that the issue has been fixed for me as well! ****ing finally! :cyclops:
Btw it will not switch to Dutch
Click to expand...
Click to collapse
Pliss help me with step to fix it
Hello! It seems all the firmwares ending with CPE1/CPH1 are problematic. You can try some other firmware from http://www.sammobile.com/firmwares/database/SM-G901F/
Select the firmware what seems best for you, don't select the operator-based ones, like vodafone etc. If you click on the firmware and scroll the page down, you will see step-by-step instructions how to install it. Good luck!
Ok but i can't found latest country band FW have same with indonesia network (except FW country singapure now i using it)
So i'll try to download FW update 2016-09-03
Country Unknown
Build date Tue, 13 Sep 2016
Security Patch Level 2016-09-01
Product code ORL
PDA G901FXXS1CPI4
CSC G901FORL1CPF1