Hello all,
I was finally able to connect my Nexus Q to a TV after waiting about a week for an OTG cable in the mail. Since set up I have noticed that the output from the Q is slightly larger than the display I am using. I haven't been able to find a solution within the settings, and I've found no information online due to the rarity and limited support of this product. If anyone could help point me in the direction of some kind of solution I would greatly appreciate it!
deevmtb said:
Hello all,
I was finally able to connect my Nexus Q to a TV after waiting about a week for an OTG cable in the mail. Since set up I have noticed that the output from the Q is slightly larger than the display I am using. I haven't been able to find a solution within the settings, and I've found no information online due to the rarity and limited support of this product. If anyone could help point me in the direction of some kind of solution I would greatly appreciate it!
Click to expand...
Click to collapse
Might sound silly, but did you make sure your TV isn't zooming in? TVs do that to make non wide screen content fit the whole screen
animal24 said:
Might sound silly, but did you make sure your TV isn't zooming in? TVs do that to make non wide screen content fit the whole screen
Click to expand...
Click to collapse
I did go in and check that, but changing those settings didn't work. I began swapping other settings I saw to see what would work, and it turned out changing the "Overscan" to "off" solved the problem completely.
i do not have an overscan option, still having this issue.
r4dik4l said:
i do not have an overscan option, still having this issue.
Click to expand...
Click to collapse
What TV are you using? Are you using any adapters?
apex tv, just have the micro hdmi to HDMI port. I have it plugged into slot 1, had it in slot 2 and makes no differences by port
Has anyone had success with this? I just got CM 10.1 running on my Q, and the image extends off the screen's physical area in every direction. I also haven't got an OTG cable yet so I can't really do anything, but that's another issue...
Anyway, my Q is hooked up through a Harman/Kardon receiver, and I've had issues with Linux PCs not reading the EDID info properly in the past, so I suspect it's a similar problem. The stock firmware didn't seem to have a problem though, and neither does the Chromecast or any commercial device.
There's gotta be a way to adjust the video mode timing, right?
Related
Hello,
anybody else got a problem with TV OUT ?
I cannot make it work. And when entering the Service/Test Mode, it won't work there either! Its setting is OFF.
In comManager its all greyed out, no matter if connected with a cable to a tv or not.
There is a reg setting about it and when I enable it there, it shows enabled, but it actually is NOT.
So I am wondering if this is perhaps MY hardware or if there is any 'secret' to it, to make it work.
Thanks!
Everybody's elses TV OUT working fine???
Hey what is this, no replies at all. Should I believe EVERYBODIES TV OUT is working fine?
Or nobody using that at all? I want to know if with all you out there, the TVout in connection manager is greyed out or not (with or without a plug).
Even in service/test mode my setting is OFF and cannot be changed.
Need to know if this is just mine and the hardware is perhaps broken. Thanks!
Mine works.
(I used it very rarely but it's good to know it there)
MS Direct Push not working either?!?!
Good to know at least somebody's works! If you go to connection manager, the TV screen is greyed out on mine, on yours its yellow?
And what about the square where you put the ckeckmark, its greyed on mine, on yours not?
Now, what is your software version?
Thanks
michaelthemage said:
Good to know at least somebody's works! If you go to connection manager, the TV screen is greyed out on mine, on yours its yellow?
And what about the square where you put the ckeckmark, its greyed on mine, on yours not?
Now, what is your software version?
Thanks
Click to expand...
Click to collapse
When the cable is not connected, the TV out checkbox in Connection Manager is greyed out. The moment I connect the cable to both phone and TV, a menu pops up and shows a picture and two aspect ratio options to choose from.
Are you sure it's not the cable or the input on the TV faulty? I mean it is clear for me the TV out option is available only after a connection between phone and a valid input of a working TV has been established. Dunno, try other tv sets?
My phone software is plain 6.5.3 generic UK. only mods are sd card fix and overclocking, so very little to do with the matter we are discussing.
Yeah, I tried different TVs. But since it won't even work in TestMenu, I figure it my hardware now.
You see, in testmenu, one does not even need to connect a TV because it will be displayed on the lcd. And no cable needed either.
What is your manufacture date? Its inside battery compartment on white sticker, like 09Wxx or 10Wxx.
Mine says 09W48
michaelthemage said:
Yeah, I tried different TVs. But since it won't even work in TestMenu, I figure it my hardware now.
You see, in testmenu, one does not even need to connect a TV because it will be displayed on the lcd. And no cable needed either.
What is your manufacture date? Its inside battery compartment on white sticker, like 09Wxx or 10Wxx.
Click to expand...
Click to collapse
I'm too facing the same problem..
It identifies the cable as a headset.
Anything to do...?
vignesh8910 said:
I'm too facing the same problem..
It identifies the cable as a headset.
Anything to do...?
Click to expand...
Click to collapse
1. plug your TV OUT cable into your tv
2. plug your TV OUT cable (jack 3.5 mm interface) into your x2
it seems work to me
(sorry for my bad english)
I recently upgraded my Nexus 7 and saw this in the "What's New" section:
Share what’s on your phone on the big screen.
Android 4.2 allows devices to enable wireless display. You can share movies, YouTube videos, and anything that’s on your screen on an HDTV. Just connect a wireless display adapter to any HDMI-enabled TV to mirror what’s on your screen quickly and easily.
Click to expand...
Click to collapse
I immediately went to Amazon and looked for different "wireless display adapters" per the announcement above, but I'm totally in the dark to which are going to be compatible with the Nexus 7. Does anyone have a recommendation?
Also, will I be able to connect to my Wi-Fi and still have an internet connection? I'm assuming I will be able to and it's more like they're all networked together (Computer, Display Adapter, Nexus 7, etc.), correct?
Lastly, I don't believe I noticed a new app on my phone to facilitate the connection once the Wireless Display Adapter is purchased and connected; am I missing something?
Thanks in advance for all of your help, you guys are the best!
Start with this thread: http://forum.xda-developers.com/showthread.php?t=1987695 Post 2 & beyond.
Thanks for the direction. Checked that thread out and found that Miracast is not compatible with N7, but is there any other hardware/software that would be?
For example:
http://www.amazon.com/Belkin-Screen...353&sr=8-1&keywords=wireless+display+adapters
jcalderone said:
Thanks for the direction. Checked that thread out and found that Miracast is not compatible with N7, but is there any other hardware/software that would be?
For example:
http://www.amazon.com/Belkin-Screen...353&sr=8-1&keywords=wireless+display+adapters
Click to expand...
Click to collapse
The N7 currently does not support Miracast, and there is doubt it ever can since it does not support 802.11a.
ya gotta love it
If mrs pete and Mr repeat sat on a log Mrs repeat fell off . what would happen next
This subject has been beaten to death .. Im so sad it does not work But that is the reality ..
No, not yet. You must wait.
If there's a will there's a way
jcalderone said:
I recently upgraded my Nexus 7 and saw this in the "What's New" section:
I immediately went to Amazon and looked for different "wireless display adapters" per the announcement above, but I'm totally in the dark to which are going to be compatible with the Nexus 7. Does anyone have a recommendation?
Also, will I be able to connect to my Wi-Fi and still have an internet connection? I'm assuming I will be able to and it's more like they're all networked together (Computer, Display Adapter, Nexus 7, etc.), correct?
Lastly, I don't believe I noticed a new app on my phone to facilitate the connection once the Wireless Display Adapter is purchased and connected; am I missing something?
Thanks in advance for all of your help, you guys are the best!
Click to expand...
Click to collapse
I have scoured the internet for days and days trying to find the solution to not having hdmi capability and hopefully I'm on the right path. The wireless way sounds like it will be the only possibility so I was reading an article on engadget . Unfortunately I'm unable to post a link to it on here. But if you search nexus 7 WiFi media you will find the article I am referring to.
Any of you more intelligent people have any comments, sounds like a 100 dollar solution. Thanks
ibemayhem said:
I have scoured the internet for days and days trying to find the solution to not having hdmi capability and hopefully I'm on the right path. The wireless way sounds like it will be the only possibility so I was reading an article on engadget . Unfortunately I'm unable to post a link to it on here. But if you search nexus 7 WiFi media you will find the article I am referring to.
Any of you more intelligent people have any comments, sounds like a 100 dollar solution. Thanks
Click to expand...
Click to collapse
That's not screen mirroring. It's just DLNA/UPNP. And there are better and cheaper solutions. First look if your TV already supports DLNA/UPNP. If not, get yourself a raspberry pi and install raspbmc, openelec or any other distro that gives you XBMC. Then just enable it in the XBMC settings and get yourself a xbmc remote and a UPNP/DLNA app like bubbleupnp. That way you can even watch nearly any media you want on your big screen including avi(enable unsupportet mime types in bubbleupnp settings) and youtube videos(in the youtube app just press share and then share it via your xbmc remote).
But it is still no screen mirroring like miracast. I still have hope for miracast on the n7, since MIRACAST DOES NOT NEED 802.11a it is only optional for better performance in some situations.
And if that doesn't work, there is always the amazing open source community. Android Transporter just needs to be implemented into Cyanogenmod and given sound support and we don't need to wait for the big players to implement miracast on our n7.
Look at what asus has to say.
commercial.asus.com/product/detail/nexus-7
Nexus 7 is powered by Android™ 4.1, Jelly Bean, the latest version of the world’s most popular mobile platform. Featuring faster and smoother graphics and transitions, smarter notifications, new widgets that put frequently used content front and center, and home screen customization with easy drag and drop navigation, the platform is faster and more intuitive.Now, via FOTA update, Android™ 4.2 is available. Features of this latest operating system include support for multiple users on a tablet, Swype-style gesture keyboard for easy typing while on-the-go, Daydream screensaver which displays useful information when the tablet is idle or docked, Photo Sphere which creates a new way to take panoramic photos, and the ability mirror what's on the tablet to an HDMI-enabled HDTV through a wireless display adapter to share with others.[\QUOTE]
Click to expand...
Click to collapse
I've been trying to get a BT mouse to work on my nexus 4.
i've now tried 2 different models, without success.
both are recognized, both pair and then both completely fail to work.
to add insult to injury, i tried one of those mice on a friend's samsung google nexus today -- also running jellybean -- and it worked perfectly.
could anybody running a BT mouse successfully SINCE THE LAST UPDATE (4.2.1) let me know what make/model they have?
EDIT: maybe they heard me ...
http://www.idigitaltimes.com/articl...jelly-bean-update-bluetooth-fix-exclusive.htm
i understand your frustration, but just one question.. why are you using a bluetooth mouse on a phone? tablet, understandable but phone?!
khanh1289 said:
i understand your frustration, but just one question.. why are you using a bluetooth mouse on a phone? tablet, understandable but phone?!
Click to expand...
Click to collapse
take a nexus 4 + slimport adaptor + BT mouse + BT keyboard,
add an lcd TV with hdmi input (now common in hotels etc.),
and you have:
- a portable PC
- a decent home media centre (with armchair remote input)
- possibly a productivity tool for editing text/ photos etc. for which a touchscreen is too inprecise an input device.
understand now?
Instead of doing all that why wouldn't you just go wireless display and then use the phone as the remote at the sametime? Wouldn't that make more sense?
And AFAIK, bluetooth input devices weren't supported?
sorry, i typically use a laptop for those things. It would make a lot more sense btw. You can also use your phone as a bluetooth mouse/keyboard if you have a laptop that connects to a tv.
shotta35 said:
Instead of doing all that why wouldn't you just go wireless display and then use the phone as the remote at the sametime? Wouldn't that make more sense?
And AFAIK, bluetooth input devices weren't supported?
Click to expand...
Click to collapse
???
a/ i haven't a clue what "go wireless display" means.
b/ "use the phone as a remote" ... for what exactly? and how does that help me?
c/ where has google stated that "bluetooth input devices weren't supported"? that's nonsense.
re-read my previous post and try to get your head around what i am trying to achieve.
theabsurdman said:
???
a/ i haven't a clue what "go wireless display" means.
b/ "use the phone as a remote" ... for what exactly? and how does that help me?
c/ where has google stated that "bluetooth input devices weren't supported"? that's nonsense.
re-read my previous post and try to get your head around what i am trying to achieve.
Click to expand...
Click to collapse
Wow, you are quite "the absurd man". If you're trying to find help in a forum, it's best if you be a bit nicer. We're both trying to give you better alternatives to what you're trying to accomplish. To answer your questions...
A/wireless display technology is built in with the n4 and jelly bean and it's not yet widely available to most tv's yet but achievable with adapters.
B/so you don't have to carry around a Bluetooth mouse and keyboard. It helps you with 2 less things you carry (unless you're using a combo).
C/this one I can't back him cause I thought it is supported. Maybe it is broken, but I don't use it so I wouldn't know
Sent from my Blenzderz 9000
khanh1289 said:
sorry, i typically use a laptop for those things. It would make a lot more sense btw. You can also use your phone as a bluetooth mouse/keyboard if you have a laptop that connects to a tv.
Click to expand...
Click to collapse
... perhaps more sense to you, not me.
i don't want to carry a laptop around when i already have a computer in my pocket.
and i'm not happy with touch input devices as they are too slow and lack the precision needed for heavy editing.
these are my (not i.m.o. unreasonable) requirements of the nexus 4.
khanh1289 said:
Wow, you are quite "the absurd man". If you're trying to find help in a forum, it's best if you be a bit nicer. We're both trying to give you better alternatives to what you're trying to accomplish. To answer your questions...
A/wireless display technology is built in with the n4 and jelly bean and it's not yet widely available to most tv's yet but achievable with adapters.
B/so you don't have to carry around a Bluetooth mouse and keyboard. It helps you with 2 less things you carry (unless you're using a combo).
C/this one I can't back him cause I thought it is supported. Maybe it is broken, but I don't use it so I wouldn't know
Sent from my Blenzderz 9000
Click to expand...
Click to collapse
getting the display to the TV is no problem -- i already have a slimport adaptor! why would i want to max out my wifi for that? it's bananas!
and i've already said that i don't want to use touch input as it's too slow and inprecise for my purposes.
my portable (igo stowaway) keyboard and notebook BT mouse are tiny (and inexpensive).
sorry to seem abrasive but you are not getting what i'm trying to achieve here.
khanh1289 said:
why are you using a bluetooth mouse on a phone? tablet, understandable but phone?!
Click to expand...
Click to collapse
i've heard other people making the tablet/ phone distinction before and i'm not sure it's a valid one. the nexus 4 surely IS a tablet, albeit with a smaller physical (not resolution) screen. what else distinguishes a tablet? i use my N4 in exactly the same way i used my asus transformer and playbook.
theabsurdman said:
i've heard other people making the tablet/ phone distinction before and i'm not sure it's a valid one. the nexus 4 surely IS a tablet, albeit with a smaller physical (not resolution) screen. what else distinguishes a tablet? i use my N4 in exactly the same way i used my asus transformer and playbook.
Click to expand...
Click to collapse
In your first post you didn't clarify that you were going to hook it up to a tv, so I assume that you were planning to connect a Bluetooth mouse and keyboard to your n4 and try to work from it's bit-smaller-than 5" display, which is highly unproductive.
N4 is technically a phone, not a tablet, by definition and specifications. I shouldn't have to explain the differences between a phone and a tablet (I'm sure there's a thread with detailed explanations)... just because it's running the same os doesn't mean it has the same hardware classification.
I understand that you want your N4 to replace your computer and the technology is very close, but not quite there yet... For simple tasks, it's good, but for anything editing, a laptop computer is highly more productive than a phone. Imagine you're doing something and you constantly receive phone calls and text messages.
Anyways, I will test this later when I get home and see if it's really broken. I know my Bluetooth moga game controller works just fine so I don't know why your mouse wouldn't.
Sent from my Blenzderz 9000
khanh1289 said:
Anyways, I will test this later when I get home and see if it's really broken. I know my Bluetooth moga game controller works just fine so I don't know why your mouse wouldn't.
Sent from my Blenzderz 9000
Click to expand...
Click to collapse
i'd appreciate that, thanks.
my BT keyboard works fine, but no mouse that i've tried.
Bluetooth is pretty much borked in all versions of Jellybean for all devices. Some things work and some things don't its pretty hit or miss. Version 4.2.1 added some drivers for game controllers but not much else so that's probably why those work and things like mice don't. There is supposed to be another fix coming in the next version but all that's known to be in there for sure is a fix for A2DP streaming.
http://www.androidpolice.com/2012/11/27/changelog-whats-new-in-android-4-2-1-jop40d/
http://www.droiddog.com/android-blo...ease-will-fix-bluetooth-a2dp-audio-streaming/
kzoodroid said:
Bluetooth is pretty much borked in all versions of Jellybean for all devices. Some things work and some things don't its pretty hit or miss. Version 4.2.1 added some drivers for game controllers but not much else so that's probably why those work and things like mice don't. There is supposed to be another fix coming in the next version but all that's known to be in there for sure is a fix for A2DP streaming.
Click to expand...
Click to collapse
however, the (jellybean) samsung google nexus has no problem running a BT mouse, as i saw today.
i'd like to raise awareness of this problem with the N4 and get some more response from users, which has so far been sparse, probably because (as other posters in this thread have indicated) few see the need for a mouse.
for instance, somebody reported on another thread that they had been able to make a microsoft 5000 notebook mouse work. can anybody corroborate that?
i'm reluctant to shell out for yet another mouse considering that i'm currently holding 2 non-functioning ones.
not sure how much good it's going to do but i've opened an issue (#43918 Nexus 4 -- bluetooth mouse not working.) with the android development project:
https://code.google.com/p/android/issues/detail?id=43918&thanks=43918&ts=1359688071#makechanges
"bluetooth mouse not working on nexus 4 (jellybean 4.2.1)
i've tried 2 different models of bluetooth mouse. both are detected and pair, and are recognized in settings as input divices, but i get no on-screen cursor nor any mouse/ button input registed by the device. nothing.
the same mice work properly on a samsung google nexus."
i've had one response to my issue at google already.
could anybody else who is having this problem please add to that thread also?
https://code.google.com/p/android/issues/detail?id=43918&thanks=43918&ts=1359688071#makechanges
meanwhile i'm awaiting delivery of a microsoft notebook 5000 BT mouse which has been reported to work by another poster. i'll report back on that when it arrives
UPDATE:
at last i've found a mouse that works!
the microsoft bluetooth notebook 5000
Well, since I don't have a TV with HDMI, I was really hoping I could run my OUYA on my computer monitor with an HDMI to DVI cable. I do get picture, but the resolution is horrible. I've contacted support about this, but have not received a reply in over a month. Apparently I am not the only one with this issue as it can be found all over the support forums. Not sure if it's a resolution issue or HDCP issue or something else, but I'm hoping some enterprising dev can figure it out.
On the same note, since my monitor doesn't have speakers and an HDMI audio extractor is about the same price as the OUYA, it'd be nice to be able to use a USB DAC to output audio to my desktop speakers. Apparently the SGS3 has it enabled, it just isn't in the stock android kernel yet: See Android Issue 24614
Anybody working on this or heard directly from OUYA support?
TopherBarnett said:
Well, since I don't have a TV with HDMI, I was really hoping I could run my OUYA on my computer monitor with an HDMI to DVI cable. I do get picture, but the resolution is horrible. I've contacted support about this, but have not received a reply in over a month. Apparently I am not the only one with this issue as it can be found all over the support forums. Not sure if it's a resolution issue or HDCP issue or something else, but I'm hoping some enterprising dev can figure it out.
Anybody working on this or heard directly from OUYA support?
Click to expand...
Click to collapse
The resolution isn't an OUYA specific problem, it's the same on many devices. I believe it does have to do with HDCP. I know there are some people out there with similar situations as you that have a converter cable that works, but it's not very common. IMO this is something I believe they never thought would come up was a problem that seems to be more common than not.
And yes, any type of converter box or audio splitter is going to cost you. the HDMI to Component box that I was looking at that I heard works costs 150, so it's not really worth it.
As for the sound over USB, I haven't heard of that yet for OUYA, but I know it was actually part of android starting with 4.1. That does not mean it works with the OUYA, however, as it seems only a few phones/tablets actually have the ability. If you have a micro USB to USB adapter, you might try it through that, but other than that not sure if there's any options.
I was really hoping this thing would have a AUX port, but it doesn't. I know there's some devs working on pushing sound and video from android over a network, but it's still in early stages and as far as I know no one has it working yet.
Really hope someone finds a good workaround. I don't particularly want to buy a TV just for this little box.
Well this is interesting...I just installed CWM, and while in recovery it shows full screen and looks rather nice. This must mean that it's not an inherent problem with my screen or connection, but is something do do with the software. This makes a work-around seem feasible, no?
Just found a reply in the StockPlus thread in the Dev section, but thought I'd repost here since I don't have 10 posts yet and can't reply there:
KyleK29 said:
http://www.amazon.com/Syba-SD-CM-UAU...Syba+USB+Audio
This one, from what I understand it's Android compliant, so it just needs the standard USB Audio modules. I know the Nexus 7 got it working with certain kernels that had the necessary modules loaded. Jellybean was supposed to make this easy, but it's been hit or miss on which ROMs have the files.
Click to expand...
Click to collapse
I have the same USB audio adapter and it's not working for me either. Really hoping someone cracks this nut.
TopherBarnett said:
Well, since I don't have a TV with HDMI, I was really hoping I could run my OUYA on my computer monitor with an HDMI to DVI cable. I do get picture, but the resolution is horrible. I've contacted support about this, but have not received a reply in over a month. Apparently I am not the only one with this issue as it can be found all over the support forums. Not sure if it's a resolution issue or HDCP issue or something else, but I'm hoping some enterprising dev can figure it out.
On the same note, since my monitor doesn't have speakers and an HDMI audio extractor is about the same price as the OUYA, it'd be nice to be able to use a USB DAC to output audio to my desktop speakers. Apparently the SGS3 has it enabled, it just isn't in the stock android kernel yet: See Android Issue 24614
Anybody working on this or heard directly from OUYA support?
Click to expand...
Click to collapse
The issue with this is that the Ouya looks for screenmodes of 1920x1080p and 1280x720p in the monitor EDID.
Failing this, it reverts back to a letterboxed 640x480 screenmode.
There's a thread here with more info.
I have an old monitor that runs 1600x900 I use it on next to my computer just to root. If I could make it use 1280x720 and my logitech usb sound card I'd get more use from the ouya as it's now hooked to a shaerd TV. I can run my PS3 and xbox on the monitor at 1280x720 and get sound from the av outputs.
Sent from my rooted Nook HD+
muriani said:
The issue with this is that the Ouya looks for screenmodes of 1920x1080p and 1280x720p in the monitor EDID.
Failing this, it reverts back to a letterboxed 640x480 screenmode.
There's a thread here with more info.
Click to expand...
Click to collapse
Good info on that thread, too bad nobody has seemed to make much progress though. My monitor is capable of up to 1920x1200 and supports 1280p and 720p resolutions. Sounds like the solution is either to get the EDID talking correctly, or hack in a way to override the OUYA settings and change the resolution manually.
I am running a HDMI Audio Switch (Ligawo HDMI Audio Switch ~35€) using a hdmi-cable between ouya and switch and a hdmi-dvi cable to connect the switch with my computer monitor. The switch comes with a cinch-output that is connected with my 2.0 Amplifier.
Funnily enough the switch also solves the resolution problem, I still have when connecting the ouya with my monitor via hdmi-dvi cable. Now my monitor runs brilliant on 720p.
shaDNfro said:
I am running a HDMI Audio Switch (Ligawo HDMI Audio Switch ~35€) using a hdmi-cable between ouya and switch and a hdmi-dvi cable to connect the switch with my computer monitor. The switch comes with a cinch-output that is connected with my 2.0 Amplifier.
Funnily enough the switch also solves the resolution problem, I still have when connecting the ouya with my monitor via hdmi-dvi cable. Now my monitor runs brilliant on 720p.
Click to expand...
Click to collapse
I bet the switch provides some EDID spoofing. Most do in order to keep display sources from freaking out when the display is disconnected and reconnected.
Glad to hear it works...hopefully that means it's less of an issue with HDCP and more to do with EDID. I'd rather not have to buy a switch that is almost as expensive as the console itself when DVI and USB audio (in my opinion) should work out of the box. Hopefully the OUYA devs get around to adding support, but I have more hope for the XDA chefs.
Hi.
shaDNfro said:
I am running a HDMI Audio Switch (Ligawo HDMI Audio Switch ~35€) using a hdmi-cable between ouya and switch and a hdmi-dvi cable to connect the switch with my computer monitor. The switch comes with a cinch-output that is connected with my 2.0 Amplifier.
Funnily enough the switch also solves the resolution problem, I still have when connecting the ouya with my monitor via hdmi-dvi cable. Now my monitor runs brilliant on 720p.
Click to expand...
Click to collapse
I just bought such a Ligawo device, and whenever I plug in the HDMI-DVI cable, the OUYA seems to turn off sound via HDMI, seemingly because al that digital stuff is so "clever" it knows that DVI doesn't do sound. At least that's what I think, and one of the customer reviews on the device on Amazon (the link I cannot -yet- post here, grmbl) confirms it, kind of.
You don't have that problem?
Regards,
Karsten
Hi I need some help please , I recieved the tv box from a friend with no remote. I plug in adaptor as well as usb to pc to power it up. There is blue light on tv box but no display on hdmi or av input. Any suggestions on how to switch it on or what to do.
It may be possible to control it using a usb keyboard and mouse if you could see the picture and it has the correct drivers. The picture thing sounds like the biggest problem, I would suggest trying different HDMI cables and tv settings. This is highly unlikely, but if by any chance your friend turned on usb debugging before the picture stopped working, there is a tool called scrcpy that can be used with adb that allows you to view your screen on your computer. It’s quite possible that the thing has broken itself, there’s a lot of reviews online about Android TV boxes spontaneously breaking after only a few months of use, sometimes less than that.
¡¿Kathyyy1212?! said:
It may be possible to control it using a usb keyboard and mouse if you could see the picture and it has the correct drivers. The picture thing sounds like the biggest problem, I would suggest trying different HDMI cables and tv settings. This is highly unlikely, but if by any chance your friend turned on usb debugging before the picture stopped working, there is a tool called scrcpy that can be used with adb that allows you to view your screen on your computer. It’s quite possible that the thing has broken itself, there’s a lot of reviews online about Android TV boxes spontaneously breaking after only a few months of use, sometimes less than that.
Click to expand...
Click to collapse
Thank you for your feedback and assistance much appreciated. I will give it a try .