As some of you may know, some of the samsung mirroring apps requerie to have the system stock or have your flash counter on 0. This happen to me in the s3 with the hdmi wireless dongle and after use the traingle away, everithing works fine. Now is happening againg with my Sprint GS4 and triangle away didnt work.
Thanks in advance.
Felix J said:
As some of you may know, some of the samsung mirroring apps requerie to have the system stock or have your flash counter on 0. This happen to me in the s3 with the hdmi wireless dongle and after use the traingle away, everithing works fine. Now is happening againg with my Sprint GS4 and triangle away didnt work.
Thanks in advance.
Click to expand...
Click to collapse
For me, Triangle Away does reset the counter to 0 but then it reverts back to its previous value after a reboot. If I select the option to auto reset the counter at reboot, the counter stays at 0 but only because TA is flashing the counter at bootup every time. I think we may have just have to wait for the app to be updated for the S4.
Yea unfortunately it doesn't get rid of the " custom" status in about device either, even when I allow tracker to run
Marty said:
For me, Triangle Away does reset the counter to 0 but then it reverts back to its previous value after a reboot. If I select the option to auto reset the counter at reboot, the counter stays at 0 but only because TA is flashing the counter at bootup every time. I think we may have just have to wait for the app to be updated for the S4.
Click to expand...
Click to collapse
Chainfire said in his Triangle Away thread that his next version would fix this issue
opz187 said:
Yea unfortunately it doesn't get rid of the " custom" status in about device either, even when I allow tracker to run
Click to expand...
Click to collapse
The only way to do that currently is to revert to unrooted stock
troyboytn said:
Chainfire said in his Triangle Away thread that his next version would fix this issue
The only way to do that currently is to revert to unrooted stock
Click to expand...
Click to collapse
I actually did Odin stick unrooted MDC, and it still said custom under about device. So I'm screwed if I ever need to warranty
Really? I did the Odin flash as well. Did you do a factory reset after you reverted back to stock unrooted? That's the only way to revert everything back to stock as it came out of the box. I ran Triangle Away, unrooted via Odin with the stock MDC tar file and let the phone boot up. Then I booted into the Recovery, did a factory reset and then booted back up again. After I was back up and running, I rebooted into the bootloader and the Binary and System Status were both set to Official. Then I checked the system status in About Device and it too was set to Official.
opz187 said:
I actually did Odin stick unrooted MDC, and it still said custom under about device. So I'm screwed if I ever need to warranty
Click to expand...
Click to collapse
Like Travis said, it's possible to go back to Official status. The only thing I did differently was that I performed a Factory Reset first then Odin'ed the stock MDC. The end result is the same - Official status in Settings.
optimummind said:
Like Travis said, it's possible to go back to Official status. The only thing I did differently was that I performed a Factory Reset first then Odin'ed the stock MDC. The end result is the same - Official status in Settings.
Click to expand...
Click to collapse
I'm telling ya I did all of those. Booted into stock recovery and factory data reset. Still said custom in about device and in bootloader. I ran triangle away, did all the same, still custom
Please read forum rules before posting
Questions and help issues go in Q&A and help sections
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
I'm actually having the exact same issue. It worked before I updated to the MDL radio. I had restored to MDC when I hadn't updated after flashing around and binaries had been reset, but now after flashing around after the update its stuck on custom. Guess Ill just wait it out.
triangle away works for the s4..
Related
Hi,
I've been do many flash last 24 hours on my Galaxy S4(Model SGH-I337M, Telus). Initialy, i've the factory stock rom, rooted. So, yesterday, i've decided to install Cyanogen mods nightly on my phone. Not the first time i've been used it on my phone. No problem before. So, this night, after a friend show me the release canditate release seem to be more stable, i've been try to put it on my phone. So, accidentaly wipe all the data on my phone. When i'm back home, i've put again the samsung original rom from my operator(4.2.2), found here, on the website, whit odin. All completed succefully, but i've noticed that the wifi won't turn on after the flash, and no sound from the speaker. So, i've put Cyanogen nigthlies again to test if it rom relative, but same issues here, no sound, but the wifi was working. The phone was very instable, so. Then, finaly, put the original rom again, without any rooting. Stuck on samsung logo, that i've finaly got fixed by clear the data and cache. But, no sound, and no wifi. Instable too.
Precision about phone: Unlocked whit the service mode(work), and enabled AWS whit a software and file(tutorial found here)
My question is: Anything else i can do to make my phone work fine again, and does it's possible to make the phone totaly stock? When i boot up, i've noticed that the phone, whit all rom i've try, said on samsung logo: Kernel is not sendroid enfonced, warranty status: kernel, so i can't go to return my phone on warranty whit that. How i can erase that line, and make my phone seem to be no modified?
Just to specify, it's not the first time i flash a phone. Do many flash, whit galaxy s2, s3 and s4, and sure, mine. Got try Cyanogen, stock, know how Odin work and all, try many rom, and before today, never has any problem to do turn back, but now, it's seem to be impossible.
Thank you very much for your help, very appreciated!
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
jd1639 said:
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
Click to expand...
Click to collapse
I've just try this. Flash the stock rom whit odin, and factory reset on original recovery after. Same, no wifi, no any sound.
Just see yesterday, when i'm flashing, i'm flashing on the bootloader in odin(whit the tar for the stock rom). Today, correct this by flash on the pda section, still not work. Found here on the forum the stock bootloader, rom, csc, and modem, but when i do this whit odin, odin said fail.
Thank very much, i think my phone is dead, and nothing to do to exchange it on warranty.
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
saj222 said:
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
Click to expand...
Click to collapse
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
dardares said:
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Click to expand...
Click to collapse
I've seen worse software, it's no better or worse than iTunes.
Sent from my SGH-I337M using Tapatalk
dardares said:
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
Click to expand...
Click to collapse
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
mps5566 said:
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
Click to expand...
Click to collapse
This is the link i've found whit all the factory stock operator ROM. This is what rescue me.
http://forum.xda-developers.com/showthread.php?t=2269304
@Spacemonkie4207 never my itune was freeze, and i can do basic operation like transfer music or create playlist without any problem. My kies stay on connection in progress, and turn, turn, turn, but never connect. And when it connect, only one operation, and kies completely freeze, stop responding, need to close it, and open it again. Tried many cable, usb cable, reinstalling software, two other computer, but nothing to do.
I recovered back to stock from custom to 4.3 however if you do so, depending on carrier you could lose root and the ability to install custom recovery.
I would revert back to 4.2.2 (as it's knox free) go to samsungupdates (google it) and pull the 4.2.2 for your region and carrier. flash with odin 3.9
you'll lose root, but you can always perform again as long as not on 4.3 (with 4.3 u can still root if you remove all the knox stuff, u just lose warranty).
Az
The problem is the phone is showing Custom when the phone is turned on. I was on MF3, had rooted via the SD card method. The custom appeared at that point. I did a factory reset and the custom went away and lost root but the superuser app was still showing in the app draw (factory reset did not delete this). I was planning on reloading the MF3 firmware via odin but lent the phone to my daughter while I replaced the screen in her note2. Well of course she got the upgrade message to 4.3 from AT&T, did it and now the unlocked custom is back. Not sure why as it was showing as official, the trip counter was still 0 (never installed a ROM on it) BUT the superuser app was there.
Now on 4.3 I've rooted/unrooted via Kingo, during the unroot it removes superuser but the custom won't go away. I installed Triangle Away while rooted and it still shows 0 on the flash counter. Is there something in this Knox security (not sure how to check this) causing the custom?
Just want to get it back to any stock AT&T firmware so I can sell it. TIA for any help
there are only certain roms you can flash while being on mf3. If you did the mk2 update there is no recovery out yet. Using vroot and kingo are unsafe methods of rooting so puts your device at risk.
rzracer2 said:
The problem is the phone is showing Custom when the phone is turned on. I was on MF3, had rooted via the SD card method. The custom appeared at that point. I did a factory reset and the custom went away and lost root but the superuser app was still showing in the app draw (factory reset did not delete this). I was planning on reloading the MF3 firmware via odin but lent the phone to my daughter while I replaced the screen in her note2. Well of course she got the upgrade message to 4.3 from AT&T, did it and now the unlocked custom is back. Not sure why as it was showing as official, the trip counter was still 0 (never installed a ROM on it) BUT the superuser app was there.
Now on 4.3 I've rooted/unrooted via Kingo, during the unroot it removes superuser but the custom won't go away. I installed Triangle Away while rooted and it still shows 0 on the flash counter. Is there something in this Knox security (not sure how to check this) causing the custom?
Just want to get it back to any stock AT&T firmware so I can sell it. TIA for any help
Click to expand...
Click to collapse
Install the Xposed framework from xda. Then, install the Wanam module and look for the Setting under "Security Hacks" that reads "Fake system status" and check the box and reboot.
The issue won't truly be resolved until you flash an official ROM, but the Custom screen will be gone at boot.
rzracer2 said:
The problem is the phone is showing Custom when the phone is turned on. I was on MF3, had rooted via the SD card method. The custom appeared at that point. I did a factory reset and the custom went away and lost root but the superuser app was still showing in the app draw (factory reset did not delete this). I was planning on reloading the MF3 firmware via odin but lent the phone to my daughter while I replaced the screen in her note2. Well of course she got the upgrade message to 4.3 from AT&T, did it and now the unlocked custom is back. Not sure why as it was showing as official, the trip counter was still 0 (never installed a ROM on it) BUT the superuser app was there.
Now on 4.3 I've rooted/unrooted via Kingo, during the unroot it removes superuser but the custom won't go away. I installed Triangle Away while rooted and it still shows 0 on the flash counter. Is there something in this Knox security (not sure how to check this) causing the custom?
Just want to get it back to any stock AT&T firmware so I can sell it. TIA for any help
Click to expand...
Click to collapse
unroot via kingo, then factory rest...worked for me on 4.3
Do you plan on a warranty exchange?
I love seeing the custom on boot, it lets me know and other everyday normal people know my phone is slightly modified.
ROOTED ATT MK2 using Tapatalk
Not sure what I'm going to do with the phone yet, probably sell it but not totally sure. Wondering with it now showing Custom on the boot screen and in the OS will it still receive OTA updates? Hoping the AT&T 4.3 or 4.4 image will be available in the future and that might help.
rzracer2 said:
Not sure what I'm going to do with the phone yet, probably sell it but not totally sure. Wondering with it now showing Custom on the boot screen and in the OS will it still receive OTA updates? Hoping the AT&T 4.3 or 4.4 image will be available in the future and that might help.
Click to expand...
Click to collapse
I was rooted custom and received my OTA no problem. Yes
ROOTED ATT MK2 using Tapatalk
like the title says, just wondering if odin resets the flash counter. rooted this phone for my dad a while back but now he wants it back to stock and since i am not very familiar with samsungs root/unroot processes i have no idea if it resets it or not. already tried triangle away but when i rebooted and then went back to download mode to check if it reset the counter it said the binary was still custom.
So I initially rooted my Sprint S5 using the old fashioned way, which tripped my Knox flag seen at bootup in Odin mode. That part I cannot seem to get reset (going to try Triangle Away shortly).
However I now have it reloaded using the Samsung Kies Windows program with the latest firmware, and in the phone settings Device Status where it used to say "Custom" it now again says "Official". I first tried to use Odin to put the stock firmware image back on, which did not help at all.
I went into Kies version 3.2.14072_12 with my S5 plugged in and clicked Tools menu -> Firmware upgrade and initialization". It may ask you for model and serial number, which I put in for mine just fine, and then it launched saying the device will be initialized to original settings. However this is different from doing factory reset from within the phone. It reboots to odin and then recovery and performs a handful of things. When it completed I had to re-setup a bunch of things, but the phone basically unrooted itself without me telling SuperSU to do an unroot. I ran supersu and it said it couldnt run on an unrooted phone... So I checked the About info in settings and voila, back to Official status, and OTA updates work again!
Unfortunately the knox flag didnt un-set, but Im less worried about that and more worried about missing enhancement OTA patches and updates - well I was before I will update here if that Triangle program can reset the counter. I thought that counter was a hard-wired fuse piece of hardware, not flash memory, so Im not sure that it can be done, but worth a try. Hope this works for everyone and Good Luck!!
This is already known.... And FYI no known method can reset the Knox counter.
Sent from a Galaxy 5 light years away
Herby6262 said:
So I initially rooted my Sprint S5 using the old fashioned way, which tripped my Knox flag seen at bootup in Odin mode. That part I cannot seem to get reset (going to try Triangle Away shortly).
However I now have it reloaded using the Samsung Kies Windows program with the latest firmware, and in the phone settings Device Status where it used to say "Custom" it now again says "Official". I first tried to use Odin to put the stock firmware image back on, which did not help at all.
I went into Kies version 3.2.14072_12 with my S5 plugged in and clicked Tools menu -> Firmware upgrade and initialization". It may ask you for model and serial number, which I put in for mine just fine, and then it launched saying the device will be initialized to original settings. However this is different from doing factory reset from within the phone. It reboots to odin and then recovery and performs a handful of things. When it completed I had to re-setup a bunch of things, but the phone basically unrooted itself without me telling SuperSU to do an unroot. I ran supersu and it said it couldnt run on an unrooted phone... So I checked the About info in settings and voila, back to Official status, and OTA updates work again!
Unfortunately the knox flag didnt un-set, but Im less worried about that and more worried about missing enhancement OTA patches and updates - well I was before I will update here if that Triangle program can reset the counter. I thought that counter was a hard-wired fuse piece of hardware, not flash memory, so Im not sure that it can be done, but worth a try. Hope this works for everyone and Good Luck!!
Click to expand...
Click to collapse
Thanks for th3 info. When I need ota then I know what to do. Its pretty obvious that I am new to this but I'm learning
Where can I find the numbers required for kies update ? SN is no where on the phone or under battery
MagnumPOS said:
Where can I find the numbers required for kies update ? SN is no where on the phone or under battery
Click to expand...
Click to collapse
phone info.apk
Hello all,
I have a Samsung Galxy S5 with AT&T model SM-G900A. Any time the phone reboots, on the "Samsung Galaxy S5" boot screen, it says "Custom" and has an "Unlocked Padlock" logo as if the phone were rooted or something. A while back, I was trying to do a basic root to allow use of Titanium Backup using the Towelroot app, which failed because it said my phone was not supported. I'm not sure if this has caused it, or if, as I read elsewhere, it was caused by my once changing from Dalvik to ART. However, I have since switched back to Dalvik, I know its not rooted because SU and other such apps wont work, and I have even Factory Reset the device but I can not get rid of this. I would like to return my phone to its default state. How can I get rid of this "Custom" and Lock Logo? Your help is greatly appreciated! Thanks so much!
-Noomrise
It won't hurt anything as long as Knox isn't tripped but you can download the full stock retail ROM and flash it in Odin or Kies 3.
Update: Phone thinks its rooted?
Noomrise said:
Hello all,
I have a Samsung Galxy S5 with AT&T model SM-G900A. Any time the phone reboots, on the "Samsung Galaxy S5" boot screen, it says "Custom" and has an "Unlocked Padlock" logo as if the phone were rooted or something. A while back, I was trying to do a basic root to allow use of Titanium Backup using the Towelroot app, which failed because it said my phone was not supported. I'm not sure if this has caused it, or if, as I read elsewhere, it was caused by my once changing from Dalvik to ART. However, I have since switched back to Dalvik, I know its not rooted because SU and other such apps wont work, and I have even Factory Reset the device but I can not get rid of this. I would like to return my phone to its default state. How can I get rid of this "Custom" and Lock Logo? Your help is greatly appreciated! Thanks so much!
-Noomrise
Click to expand...
Click to collapse
Okay, so here is an update. After performing a factory reset in order to try and fix this issue, I was playing around and opened the "Softcard" app and received the message that it doesn't work on rooted phones. Since the Towelroot app did not work, I don't understand this. I have also been unable to get SuperUser to install binaries, saying the phone is not rooted. Don't know what this means or if it helps, but thought id give an update. Thanks again!
Would you be so kind as to provide me with a link to the retail ROM and instructions on flashing it through Kies 3? THANKS!
I'd have to do a search. .. or you could. ?
Rapunzl said:
I'd have to do a search. .. or you could.
Click to expand...
Click to collapse
Thanks, I found the file (I hope) and downloaded odin, and it is currently flashing. I will let you know if it a) removes the custom lock and b) fixes the softcard app thinking the phone is rooted. Thanks for your help!
It Worked!!!!!
Rapunzl said:
It won't hurt anything as long as Knox isn't tripped but you can download the full stock retail ROM and flash it in Odin or Kies 3.
Click to expand...
Click to collapse
I would like to report that flashing the stock ROM has fixed both the Custom Lock boot screen as well as SoftCard thinking my phone was rooted. Thank you Rapunzl for your help, you are awesome!