Hi, - I'm a noob in this.
I'm working on my Motorola Defy and my Ubuntu 13.04 machine.
I:
1) Rooted my device using these guides: "wiki.cyanogenmod.org/w/Install_CM_for_jordan"
and
.ibm.com/developerworks/community/blogs/coolwinding/entry/how_to_root_defy_on_linux1?
2) I got the CyanogenMod installed and it worked. I needed to install Gapps so I followed this guide
linux.com/learn/tutorials/698725-how-to-install-cyanogenmod-on-an-android-phone
3) When I tried rebooting my phone to install Gapps I couldn't boot into the recovery utility. I only had the possibilities: "reboot system now", "apply sdcard:update.zip", "wipe data/factory reset" and "wipe cache partition".
I tried them all (I was really stuck!) but after the wipe data/factory reset I can't even boot in the Rom, so now I'm totally stuck with these four options as all there is!
In the bottom I get:
E:Can't mount CACHE:recovery/command
E:Can't mount CACHE:recovery/caller
E:Can't mount CACHE:recovery/log
- I see these are common but it is always resolved by booting the phone in the rom and I'm not able to do that.
I read that the Defy is not easily bricked, but what is there to do now? adb can't find the device from the SDcard only.
What2do?
profkris said:
Hi, - I'm a noob in this.
I'm working on my Motorola Defy and my Ubuntu 13.04 machine.
I:
1) Rooted my device using these guides: "wiki.cyanogenmod.org/w/Install_CM_for_jordan"
and
.ibm.com/developerworks/community/blogs/coolwinding/entry/how_to_root_defy_on_linux1?
2) I got the CyanogenMod installed and it worked. I needed to install Gapps so I followed this guide
linux.com/learn/tutorials/698725-how-to-install-cyanogenmod-on-an-android-phone
3) When I tried rebooting my phone to install Gapps I couldn't boot into the recovery utility. I only had the possibilities: "reboot system now", "apply sdcard:update.zip", "wipe data/factory reset" and "wipe cache partition".
I tried them all (I was really stuck!) but after the wipe data/factory reset I can't even boot in the Rom, so now I'm totally stuck with these four options as all there is!
In the bottom I get:
E:Can't mount CACHE:recovery/command
E:Can't mount CACHE:recovery/caller
E:Can't mount CACHE:recovery/log
- I see these are common but it is always resolved by booting the phone in the rom and I'm not able to do that.
I read that the Defy is not easily bricked, but what is there to do now? adb can't find the device from the SDcard only.
What2do?
Click to expand...
Click to collapse
*In my opinion you should start again from clean SBF if you don´t know how to flash it in LINUX Guide is HERE(http://forum.xda-developers.com/showthread.php?t=1076138). Just make sure you are flashing the right SBF for your Phone.
*THEN root it as it is said here (https://www.ibm.com/developerworks/...ding/entry/how_to_root_defy_on_linux1?lang=en) *Alow USB debugging and unknown aplications and install 2ndinit apk (http://forum.xda-developers.com/showthread.php?t=1032212)
*THEN reboot and watch your phone, wait for the blue LED turns on and pres volume down.
*Select custom recovery and flash for example CM7 from HERE (http://download.cyanogenmod.org/?type=stable&device=jordan) and GAPPS (http://goo.im/gapps/gapps-gb-20110828-signed.zip) and reboot
*Now you have CM7 and working phone
** You can try CM10 (http://forum.xda-developers.com/showthread.php?t=1768702), CM10.1(http://forum.xda-developers.com/showthread.php?t=2013059) by Quarx ...... FOR CM10.1 you need MINI GAPPS (http://d-h.st/users/tejus.k.v)
Sorry for my English
yzeroy said:
*In my opinion you should start again from clean SBF if you don´t know how to flash it in LINUX Guide is HERE(http://forum.xda-developers.com/showthread.php?t=1076138). Just make sure you are flashing the right SBF for your Phone.
*THEN root it as it is said here (https://www.ibm.com/developerworks/...ding/entry/how_to_root_defy_on_linux1?lang=en) *Alow USB debugging and unknown aplications and install 2ndinit apk (http://forum.xda-developers.com/showthread.php?t=1032212)
*THEN reboot and watch your phone, wait for the blue LED turns on and pres volume down.
*Select custom recovery and flash for example CM7 from HERE (http://download.cyanogenmod.org/?type=stable&device=jordan) and GAPPS (http://goo.im/gapps/gapps-gb-20110828-signed.zip) and reboot
*Now you have CM7 and working phone
** You can try CM10 (http://forum.xda-developers.com/showthread.php?t=1768702), CM10.1(http://forum.xda-developers.com/showthread.php?t=2013059) by Quarx ...... FOR CM10.1 you need MINI GAPPS (http://d-h.st/users/tejus.k.v)
Sorry for my English
Click to expand...
Click to collapse
It worked! Thank you very much. I'm SO tired now.
In order to install zips you have to reboot to clockworkmod recovery by pressing vol down when the defy boots up showing the blue led instead of entering the stock one
Sent from my MB525 using xda app-developers app
Related
wanted to update my phone to 2.3 but i rooted and flashed the liberty 1.0 and was looking for a way to go back since Rom Manager did not save my back up so i went to this thread TBH & MyDroidWorld Present: Droid 2 (2.3.20) Triple Threat and followed these steps without uploading anything on to the sd card dumb move i know !
To install the above files you need to follow these directions:
1) boot phone into recovery
2) go to mounts and storage
3) format system
4) mount system
5) install zip from sdcard
6) choose zip from sdcard
there was obviously nothing in there to load so i went back to reboot system and now my phone will not make it pass the first boot screen if anyone can help it would be greatly appreciated !
It keeps on looping in boot animation i got it to a screen displayed like this once dont know how though ..
Bootloader
D2.37
Battery OK
OK to Program
Transfer Mode:
USB
and i know how to get here ....
Android system recovery <3e>
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
--------------------------------------------------------------------------
caution triangle with the ! and the droid symbol in it !
E:Can't open /cache/recovery/command
But i don't know what to do after i've tried wipe data/factory reset = nothing
Ive tried reboot system now = nothing
Ive tried apply sdcard:update.zip = failed to verify whole-file signature
I am clueless ... even if you can't help maybe spread my post to see if anyone out there can Thanks !
for a noob i figured this out rather quick.. I was stuck in boot animation and i held the center of the volume keys before holding the power button which brings u to...
Bootloader
D2.37
Battery OK
OK to Program
Transfer Mode:
USB
uploaded the SBF but it was the android 2.2 which when i last checked thats what my phone was running on but it after the upload failed i tried the 2.3 Download RSD Lite, the bootloader SBF, and the 2.3.20 SBF from MDW. and next thing you know i'm up and running like 3 legged crack baby ! !! thanks for the help or to myself thanks for reading
my defy stuck at infinite boot, cant access in recovery mode pls help.. thanks
I'm facing the same problem here, after flash full sbf rom, it's possible to flash again, but with same result, i can't wipe since android won't start and i can't install clockwork.
any hint, clue or point for some documentation/tutorial is apreciated
thanks in advance
---------------------------------
this is what solve the problem for me:
boot in recovery : pull out the batterie, boot with volume down and power.
when you see the android and the triangle, volume down + volume up, when in recovery, wipe data and cache.
i have the folowing "warnings"
wipe data/factory reset:
E:Can't open /cache/recovery/command
E:Can't open /cache/recovery/caller
wipe cache partition:
E:Can't mount CACHE:recovery/log
the next boot took aprox 10 mins
hope this helps
The problem for me is i cant go to recovery mode, stuck in android logo, and defy is also not charging
mrnexusone said:
The problem for me is i cant go to recovery mode, stuck in android logo, and defy is also not charging
Click to expand...
Click to collapse
hey, if you are stuck in an android logo, it means its the infinite boot-loop thing..
PLEASE make sure you are CORRECTLY trying to get into stock recovery or bootloader.
Here is what to do to get into recovery first:
1- turn off your phone (take the battery out and then put it back in)
2- press and OLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
P.S. don't worry - a bootloop is a considerably easy thing to fix, at least i managed to fix mine yesterday.
good luck
your_login said:
hey, if you are stuck in an android logo, it means its the infinite boot-loop thing..
PLEASE make sure you are CORRECTLY trying to get into stock recovery or bootloader.
Here is what to do to get into recovery first:
1- turn off your phone (take the battery out and then put it back in)
2- press and OLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
P.S. don't worry - a bootloop is a considerably easy thing to fix, at least i managed to fix mine yesterday.
good luck
Click to expand...
Click to collapse
Hi i follow your guide, but after 'factory reset and wipe cache' still stuck at android boot loop! thanks..
mrnexusone said:
Hi i follow your guide, but after 'factory reset and wipe cache' still stuck at android boot loop! thanks..
Click to expand...
Click to collapse
After factory reset, Flash Full SBF of you choice....
ifu said:
After factory reset, Flash Full SBF of you choice....
Click to expand...
Click to collapse
yes, do as @[email protected] says thats how i have done it. I could also recomend to search the forum for my posts from yesterday and you will see my post with the guide how i have fixed my infinite-boot-loop case don;t have time now to look for it, hitting the gym!
take care and good luck!
thanks guyz for all the help my phone is ok now
glad to could be of help and to see you fine man!
take care
Wow! good thing I found this thread! got my defy working again... thanks a lot guys!!!!
your_login said:
hey, if you are stuck in an android logo, it means its the infinite boot-loop thing..
PLEASE make sure you are CORRECTLY trying to get into stock recovery or bootloader.
Here is what to do to get into recovery first:
1- turn off your phone (take the battery out and then put it back in)
2- press and OLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
P.S. don't worry - a bootloop is a considerably easy thing to fix, at least i managed to fix mine yesterday.
good luck
Click to expand...
Click to collapse
thanks it works!
Puuuuwwww After manny flashes and failing i found this and got saved thanks !!!
YAYYYYYY
Yall Rock.......
playing with a moto defy ( got boot looped for 2 days ) saw this. completely forgot about the volume up and down at the sime time thing Wiped/factory flashed new SBF and Bam
the phone is now up and going on 2.3.3 good stuff yall
your_login said:
hey, if you are stuck in an android logo, it means its the infinite boot-loop thing..
PLEASE make sure you are CORRECTLY trying to get into stock recovery or bootloader.
Here is what to do to get into recovery first:
1- turn off your phone (take the battery out and then put it back in)
2- press and OLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
P.S. don't worry - a bootloop is a considerably easy thing to fix, at least i managed to fix mine yesterday.
good luck
Click to expand...
Click to collapse
that helped.. Thanks!
Still not working.
Hey Guys.
I've run into the same problem with the boot loop. I've tried the above method of doing a data reset and wiping the cache but this is not working for me. Any other ideas?
PLEASE HELP!
Defy mb525 stuck in bootloop!
I tried to upgrade my Motorola defy to icecream os and don't know what os to installed .. i downloaded CM9 and after rooting and installing recovery mode following all that step .. i end up in bootloop Got stuck with a white M logo .. then i later flashed it with this SBF file JORDN_U3_97.21.51.rar/[/url] via RSD lite .. it did booted and it was running some 2.1 ver os. so now whenever i tried to upgrade that damn phone, i ended up in bootloop i have done this multiple time with different OS >> CM9 CM10 CM7 .. no luck
To open links remove the spaces ..
Procedure:
1. Stuck in bootloop >> so i flashed it with above mentioned sbf file .. [Note: i tried flashing with different official sbf files from here [umts_jordan/list.php[/url] .... and i got stuck in black screen on boot no lights at all (bricked)]
2. After flashing .. i rooted it with superoneclick 2.3.3 and installed 'superuser' and 2ndinit 2.0 and in that i downloaded 0.6 stable ver (recovery mode installed) blue light appear
3. Reboot my phone and entered into recovery mode > wipe data/ factory reset > wipe cache > wipe delvik cache
4. select install zip from sd card > then i selected some stable os like cm 7.1 jordan or Nightly 20120812 ... > flashed it
5. installed gapps jb for jb rom similarly ics for ics rom
6. then Go back select Reboot system
7. bam got stuck in bootloop at "Motorola" logo
Please tell me what i'm doing wrong ??? which os to install ? which sbf to flash ? please help me ?
Gultan said:
I tried to upgrade my Motorola defy to icecream os and don't know what os to installed .. i downloaded CM9 and after rooting and installing recovery mode following all that step .. i end up in bootloop Got stuck with a white M logo .. then i later flashed it with this SBF file JORDN_U3_97.21.51.rar/[/url] via RSD lite .. it did booted and it was running some 2.1 ver os. so now whenever i tried to upgrade that damn phone, i ended up in bootloop i have done this multiple time with different OS >> CM9 CM10 CM7 .. no luck
To open links remove the spaces ..
Procedure:
1. Stuck in bootloop >> so i flashed it with above mentioned sbf file .. [Note: i tried flashing with different official sbf files from here [umts_jordan/list.php[/url] .... and i got stuck in black screen on boot no lights at all (bricked)]
2. After flashing .. i rooted it with superoneclick 2.3.3 and installed 'superuser' and 2ndinit 2.0 and in that i downloaded 0.6 stable ver (recovery mode installed) blue light appear
3. Reboot my phone and entered into recovery mode > wipe data/ factory reset > wipe cache > wipe delvik cache
4. select install zip from sd card > then i selected some stable os like cm 7.1 jordan or Nightly 20120812 ... > flashed it
5. installed gapps jb for jb rom similarly ics for ics rom
6. then Go back select Reboot system
7. bam got stuck in bootloop at "Motorola" logo
Please tell me what i'm doing wrong ??? which os to install ? which sbf to flash ? please help me ?
Click to expand...
Click to collapse
Hi ! Are you sure you took the good rom for your defy ? Is it a regular defy or a + ? Because you need to have the good rom for the good defy version ( at least for gb rom). Then before installing the rom with the recovery, wipe cache and dalvik cahe (in advanced) and even data if you come from 2.x to 4.x. (same thing from 4.x to 2.x).
It would work
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
your_login said:
hey, if you are stuck in an android logo, it means its the infinite boot-loop thing..
PLEASE make sure you are CORRECTLY trying to get into stock recovery or bootloader.
Here is what to do to get into recovery first:
1- turn off your phone (take the battery out and then put it back in)
2- press and OLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
P.S. don't worry - a bootloop is a considerably easy thing to fix, at least i managed to fix mine yesterday.
good luck
Click to expand...
Click to collapse
Thanks for this method even if I knew it. The first time I tried to flash a sbf it was awefull because nobody says it clearly. Wipe data, cache and dalvik in recovery doesn't work at all I experimented it again yesterday.
Please specify me the good GBROM!
bibihub said:
Hi ! Are you sure you took the good rom for your defy ? Is it a regular defy or a + ? Because you need to have the good rom for the good defy version ( at least for gb rom). Then before installing the rom with the recovery, wipe cache and dalvik cahe (in advanced) and even data if you come from 2.x to 4.x. (same thing from 4.x to 2.x).
It would work
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
Thanks for this method even if I knew it. The first time I tried to flash a sbf it was awefull because nobody says it clearly. Wipe data, cache and dalvik in recovery doesn't work at all I experimented it again yesterday.
Click to expand...
Click to collapse
Thanks for the reply ... its a regular Motorola defy' and all the roms i took it from xda developers :/ .. if possible can u give me a good rom to flash? (link mayb) I always do the sequence process .. wipe data, cache and dalvik cache and then i install the zip file. but after every upgrade and reboot system .. my phone end up at bootloop :/
Note: when i stuck in bootloop .. i go to "robot logo ! with the help given in this forum and then i press the back button on the screen so it enters into s recovery mode > but when i select wipe data/factory reset .. > my phone restarts and bootloop
Gultan said:
Thanks for the reply ... its a regular Motorola defy' and all the roms i took it from xda developers :/ .. if possible can u give me a good rom to flash? (link mayb) I always do the sequence process .. wipe data, cache and dalvik cache and then i install the zip file. but after every upgrade and reboot system .. my phone end up at bootloop :/
Note: when i stuck in bootloop .. i go to "robot logo ! with the help given in this forum and then i press the back button on the screen so it enters into s recovery mode > but when i select wipe data/factory reset .. > my phone restarts and bootloop
Click to expand...
Click to collapse
Hi here the one I use : http://www.partage-facile.com/V96TH...nfryortcee_p016_a016_hwp3_service1ff.sbf.html
PS : It's in French but just go on "telechargement gratuit (VITESSE NORMALE)" and then on "télécharger ce fichier"
Follow the steps given by your_login and you should end with a froyo ROM. After it's as usual to install a custom ROM (root , 2nd init, wipes...)
Also when you are in bootloop remove the battery and restart the phone. When there is the blue led with the M logo press volume down and then go into recovery > stable recovery. I think it's better than your method
My phone is bricked after flashing!
bibihub said:
Hi here the one I use >>
PS : It's in French but just go on "telechargement gratuit (VITESSE NORMALE)" and then on "télécharger ce fichier"
Follow the steps given by your_login and you should end with a froyo ROM. After it's as usual to install a custom ROM (root , 2nd init, wipes...)
Also when you are in bootloop remove the battery and restart the phone. When there is the blue led with the M logo press volume down and then go into recovery > stable recovery. I think it's better than your method
Click to expand...
Click to collapse
Appreciate ur help buddy.. but .. after i flashed with that given sbf file .. my phone is like dead .. it doesn't open nor any light pops up except when i connect to pc .. and i can able to detect in RSD lite for flashing .. after flashing it shows the status as PASS ... but i can't boot my phone after that. Can anyone please provide me better SBF file? m tired of flashing with different sbf files
Note: it does happen with other official sbf files as well.
Hi
I rooted my defy 2.2 using Superoneclick 2.1.1
than installed ROM manager for Nandroid backup.....
It is not booting in clockworkmod recovery..
the procedure i am following to get in recovery is :
1) Switch off
2) press and hold vol. down key
3) press power button
4) android symbol with a triangle appears and it's stuck there
5) now when I press both vol. down and up key, stock recovery appears
there is some messege there :
E:Can't open /cache/recovery/command
E:Can't open /cache/recovery/coller
how to boot in recovery
warewolf4586 said:
Hi
the procedure i am following to get in recovery is :
1) Switch off
2) press and hold vol. down key
3) press power button
4) android symbol with a triangle appears and it's stuck there
5) now when I press both vol. down and up key, stock recovery appears
how to boot in recovery
Click to expand...
Click to collapse
The method as you tryed is stock recovery, if you try to enter CWM recovery
after rooted, you must install Defy system recovery
- put system recovery.apk into SD card
- enable(Turn on) Unknown sources and USB debugging in Application settings
- install system recovery.apk from SD card (Use File manager or Root Explorer)
- Open System recovery App and Select Install Recovery system, it will show "Install success"
- Before reboot (Recovery reboot), you must Turn off "USB debugging"
Otherwise, defy will stuck in black screen
OK, If you want to reboot to CWM recovery mode, you can open System recovery App and Select Recovery boot
or Try that
http://forum.xda-developers.com/showthread.php?t=1032212
THBlurism said:
The method as you tryed is stock recovery, if you try to enter CWM recovery
after rooted, you must install Defy system recovery
- put system recovery.apk into SD card
- enable(Turn on) Unknown sources and USB debugging in Application settings
- install system recovery.apk from SD card (Use File manager or Root Explorer)
- Open System recovery App and Select Install Recovery system, it will show "Install success"
- Before reboot (Recovery reboot), you must Turn off "USB debugging"
Otherwise, defy will stuck in black screen
OK, If you want to reboot to CWM recovery mode, you can open System recovery App and Select Recovery boot
or Try that
http://forum.xda-developers.com/showthread.php?t=1032212
Click to expand...
Click to collapse
Worked perfectly.. Thanks!
Sir can you share the system recovery file download link...
So is there a way to boot into custom recovery with phone being off? What if a flash goes wrong and stuck with boot loop. How do you get into custom recovery to to restore backup?
mike102871 said:
So is there a way to boot into custom recovery with phone being off? What if a flash goes wrong and stuck with boot loop. How do you get into custom recovery to to restore backup?
Click to expand...
Click to collapse
What I always do when I flash something and it goes wrong is enter bootloader mode and flash a new sbf. I'm fairily sure to do that you hold power and volume up while booting.
Sent from my MB525 using XDA App
very usefull and easy to use
it was very easy, following the instructrions, just make sure to get the latest version of the software...
Zombiepiratez said:
What I always do when I flash something and it goes wrong is enter bootloader mode and flash a new sbf. I'm fairily sure to do that you hold power and volume up while booting.
Click to expand...
Click to collapse
I mistakenly rebooted after wiping cache,dalvik cache and sytem. Now I'm stuck at the moto logo. Is there any way to enter into custom recovery other than the flashing method you specified above?? I was using SlimBean(Slim-4.3.build.2-UNOFFICIAL-2013027-1124) with TWRP v2.6.3.0.
chandujram said:
I mistakenly rebooted after wiping cache,dalvik cache and sytem. Now I'm stuck at the moto logo. Is there any way to enter into custom recovery other than the flashing method you specified above?? I was using SlimBean(Slim-4.3.build.2-UNOFFICIAL-2013027-1124) with TWRP v2.6.3.0.
Click to expand...
Click to collapse
Same happened to me.
How can i get into CWM/TWRP to install a new rom?
Daimonion1980 said:
Same happened to me.
How can i get into CWM/TWRP to install a new rom?
Click to expand...
Click to collapse
Only way is to flash SBF.
Sent from my Nexus 7 using Tapatalk
hotdog125 said:
Only way is to flash SBF.
Click to expand...
Click to collapse
Yeah.. only that worked.. and I'm now on SlimKat!
Hello!
I search how to install CyanogenMod10 on my Defy MB526 BL7 DFP-231.
My config:
Rooted system: 45.0.2310.MB526.AsiaRetail.en.03
Original system: 45.0.2310.MB526.Retail.en.FR
Build: 4.5.1-134_DFP-231
Boot Loader version: 9.10
I have rooted my cell and tried this solution: http://forum.xda-developers.com/showpost.php?p=30992824&postcount=2
The first problem is that: i haven't got, or i don't find it, menu advanced with "wipe dalvik cache" in the recovery mod
I have installed ClockWorkMod but when i reboot with him (checked wipe data cache, dalvik cache & selected new rom for install) my cell boot on the classic recovery mod or freeze on the motorola boot logo.
I am lost, thank's in advance for your help
Sorry for my bad english :/
it looks like you are entering normal motorola recovery, if you say you've installed CWM ( ClockWorldMod Recovery) then you need to wait until a green light turns on at boot ( after the blue one) and quickly press <VOLUME UP>, and then you will be at CWM recovery.
elpiole said:
it looks like you are entering normal motorola recovery, if you say you've installed CWM ( ClockWorldMod Recovery) then you need to wait until a green light turns on at boot ( after the blue one) and quickly press <VOLUME UP>, and then you will be at CWM recovery.
Click to expand...
Click to collapse
Since I root my cell i have no more lights (green/blue) on boot :/
I left my cell 10 min after reboot with CWM on the recovery logo screen, no lights
Geckø said:
Hello!
I search how to install CyanogenMod10 on my Defy MB526 BL7 DFP-231.
My config:
Rooted system: 45.0.2310.MB526.AsiaRetail.en.03
Original system: 45.0.2310.MB526.Retail.en.FR
Build: 4.5.1-134_DFP-231
Boot Loader version: 9.10
I have rooted my cell and tried this solution: http://forum.xda-developers.com/showpost.php?p=30992824&postcount=2
The first problem is that: i haven't got, or i don't find it, menu advanced with "wipe dalvik cache" in the recovery mod
I have installed ClockWorkMod but when i reboot with him (checked wipe data cache, dalvik cache & selected new rom for install) my cell boot on the classic recovery mod or freeze on the motorola boot logo.
I am lost, thank's in advance for your help
Sorry for my bad english :/
Click to expand...
Click to collapse
Cant follow you hundred per cent but
Can you boot without charging cable ?
Maybe battery went empty during the flash procedure..
bone101 said:
Cant follow you hundred per cent but
Can you boot without charging cable ?
Maybe battery went empty during the flash procedure..
Click to expand...
Click to collapse
My battery is 100% charged :angel:
Geckø said:
Since I root my cell i have no more lights (green/blue) on boot :/
I left my cell 10 min after reboot with CWM on the recovery logo screen, no lights
Click to expand...
Click to collapse
then how did you installed cwm? if you dont have the lights at boot, then you havent installed 2ndinit.
you should instald 2ndinit via apk defy.wdscript.fr/jordan-nightly/SndInitDefy/SndInitDefy_2.0.apk (i can't post links sorry)
then open the app (while usb debuggin on) and hit install 2ndinit buttom, witch will also install the recovery
that is the oficial metod with the defy, once you do that you'll get the blue and green lights at boot. (durring the Motorola logo)
presing <volume up> while the blue light is on enters bootmenu, and presing <volume up > while the green light is on enters CWM recovery
elpiole said:
then how did you installed cwm? if you dont have the lights at boot, then you havent installed 2ndinit.
you should instald 2ndinit via apk defy.wdscript.fr/jordan-nightly/SndInitDefy/SndInitDefy_2.0.apk (i can't post links sorry)
then open the app (while usb debuggin on) and hit install 2ndinit buttom, witch will also install the recovery
that is the oficial metod with the defy, once you do that you'll get the blue and green lights at boot. (durring the Motorola logo)
presing <volume up> while the blue light is on enters bootmenu, and presing <volume up > while the green light is on enters CWM recovery
Click to expand...
Click to collapse
It work! \o/
Now i have this error: E:Can't open /tmp/recovery.log
Edit:
Now i have this error: E:Can't make /tmp/update_binary
When i go back i got this error: E:Can't open /tmp/recovery.log
Ok, i have installed CM10
But now my phone freeze on CM10 boot logo :/
Geckø said:
Ok, i have installed CM10
But now my phone freeze on CM10 boot logo :/
Click to expand...
Click to collapse
Take off battery , wait a bit ( 5 minutes ) and insert battery againts , then phone will boot normaly .
Geckø said:
Hello!
I search how to install CyanogenMod10 on my Defy MB526 BL7 DFP-231.
My config:
Rooted system: 45.0.2310.MB526.AsiaRetail.en.03
Original system: 45.0.2310.MB526.Retail.en.FR
Build: 4.5.1-134_DFP-231
Boot Loader version: 9.10
I have rooted my cell and tried this solution: http://forum.xda-developers.com/showpost.php?p=30992824&postcount=2
The first problem is that: i haven't got, or i don't find it, menu advanced with "wipe dalvik cache" in the recovery mod
I have installed ClockWorkMod but when i reboot with him (checked wipe data cache, dalvik cache & selected new rom for install) my cell boot on the classic recovery mod or freeze on the motorola boot logo.
I am lost, thank's in advance for your help
Sorry for my bad english :/
Click to expand...
Click to collapse
hey u say after root u had 45.0.2310.MB526.AsiaRetail.en.03.........but i already had this version after i got the official 2.3.6 update is that mean i can directly install ics...........if someone has info regarding this please tell me.....my bootloader version is 9.10
Geckø said:
Ok, i have installed CM10
But now my phone freeze on CM10 boot logo :/
Click to expand...
Click to collapse
Also, did you manage to wipe cache and wipe dalvik after you flashed the CM10 zip? If not, you should do it just to make sure. I often get stuck on moto logo when I flash roms and wiping cache/dalvik plus taking the battery out makes it better.
So I wiped cache and so on now the thing is hanging at the Motorola screen and that's it.
I tried to get a sbf but all who should be compatible are down so that I pretty much am freaked.
Is there a way to get at least now a clean rom on it maybe something new 4.4.2 without SDCard or is that also a nogo?
----
So if your phone won'T boot and you just have a white light or nothing at all. You probably have less battery power to sbf flash something.
I used the Jumper cable method from Sorensiim.
That worked like a charm.
If you are looking for sbf files. Here are some.
----
So now I rooted that thing and tried to install bootmenu. Iused the adb method with ./install.sh permission denied after the copy procedure was complete ((data/bootmenu chmod etc.). I tried 2ndinit with the problem that the program hangs after the download. So what is it now that freakin thing wants me to do?
----
Got Bootmenu installed now the Defy has a Bootloop. For a short time before it loops the white led blinks. No volume up or volume down work.
----
Hanging at M logo on re-boot
Having rooted the phone . . .
1. Switch on and await blue LED
2. Press volume down to enter Android Boot Menu (v 1.1.8-jordan)
3. Recovery
4. Custom Recovery > Cyanogen Defy Recovery (v5.0.3.1-jordan)
5. Wipe Data / Factory Reset
6. Wipe Cache Partition
7. Advanced > Wipe Dalvik Cache
8. Install zip from SD card
9. Toggle signature verification to Disabled
10. Toggle script asserts to Disabled
11. Choose zip from SD card
12. Apply zip from SD card
13. Reboot
14. Hangs at M logo
Tried with and without step 10.
The zip files tried are the only two ‘nightlies’ on the XDA website, as I have been unable to find the last ‘stable’ version.
Can anyone help please?