heyya
im just wondering whats the cause of Wparam and Lparam errors when flashing KDZ files
and how to prevent it.
and what to do if i had this error.
sorry if you think that this is a stupid question but i just want to help out how to prevent this errors resulting on Jtag-ing or going to LG service centre coz our beloved phone bricked
sorry for my bad english
its not my native language
yesiamfrozen said:
heyya
im just wondering whats the cause of Wparam and Lparam errors when flashing KDZ files
and how to prevent it.
and what to do if i had this error.
sorry if you think that this is a stupid question but i just want to help out how to prevent this errors resulting on Jtag-ing or going to LG service centre coz our beloved phone bricked
sorry for my bad english
its not my native language
Click to expand...
Click to collapse
first of all install the lg l7 drivers and msxml!
try this way: first shut down the phone, then remove the battery and hold vol up while connect the phone via usb, so will go into emergency mode.
open kdz with administrator permissions, set :
TYPE: 3GQCT and PHONE MODE: DIAG. then select the kdz file and flash it
BUT, WHICH ROM you already have installed? and to which rom you want to install?
Related
So, my friend gave me his LG GT540 to flash it with a new ROM but I kinda messed it up.
I followed the instructions from here:
http://forum.xda-developers.com/showpost.php?p=12898827&postcount=3
After flashing 2.3.7. with 'fastboot installer' the phone won't turn on anymore! I'm holding the power button but I just feel a little vibration and nothing happens.
What should I do?
I somehow managed to put the phone in download mode but KDZ Upgrader always stucks on the same point while flashing (20:41:54 : Smart : wParam = 205, lParam = 215).
Anyone?
gellow said:
I somehow managed to put the phone in download mode but KDZ Upgrader always stucks on the same point while flashing (20:41:54 : Smart : wParam = 205, lParam = 215).
Anyone?
Click to expand...
Click to collapse
you have installed msxml.msi?
cccb010 said:
you have installed msxml.msi?
Click to expand...
Click to collapse
Yes, I have.
Earlier today I managed to upgrade from 1.6 to 2.1 with KDZ. After that I flashed 2.3 with fastboot installer and after that the phone is dead.
Now I'm trying to flash it again to 2.1 with KDZ but it always stucks on that same point.
gellow said:
Yes, I have.
Earlier today I managed to upgrade from 1.6 to 2.1 with KDZ. After that I flashed 2.3 with fastboot installer and after that the phone is dead.
Now I'm trying to flash it again to 2.1 with KDZ but it always stucks on that same point.
Click to expand...
Click to collapse
Try using the original, non English version. This happened to me until I did that!
Sent from my LG GT540 Swift using Tapatalk
Do you have fastboot mode(blackscreen withback light) when you hold power and camera buttons on startup?
my friend had the same problem
he solved using fastboot on a pc with windows XP (he was on win7)
Got that problem, try differents KDZ, in cs_emergency and other computer!
Sent from my LG GT540 Swift using XDA App
Thanks guys, I will try with another PC/KDZ version. Where do I find this non-english version @liamwli was talking about?
bs828 said:
Do you have fastboot mode(blackscreen withback light) when you hold power and camera buttons on startup?
Click to expand...
Click to collapse
No, I can only get in the download mode with VOL DOWN + POWER, but to acomplish that I need to plug my phone several times in and out of my PC and at some point it finally says 'download mode' on my phone.
El version here http://forum.xda-developers.com/showthread.php?t=810271
bs828 said:
El version here http://forum.xda-developers.com/showthread.php?t=810271
Click to expand...
Click to collapse
Yes, I have that one. I would like a non-english, original version.
Tried to google it but no luck, just found some .kdz files
try using the stuff from here
http://forum.xda-developers.com/showthread.php?t=1224747
used it to flash my brothers phone from 1.6 no probs
ok first what operative system you have. Second try to find another computer to do the process again if after all this doesn't work:
* i assume you have Windows, download Ccleaner if you already don't have it to clean your computer.
*If your machine has more USB slots try them.
*Disable Internet
*Disable antivirus-Firewall (some can give problem, puts restrictions. I use avira and first time it blocked the KDZ application i had to re-install deactivate Avira antivirus and firewall to be able to flash.
*If you are going to flash with KDZ now do it under CS_emergency
So basically you have to clean your computer , install from scratch even the phone drivers(Mines works fine in Windows7 x32 and x64 bits), try with other USB slot (better the ones in the back not front in desktop PC).
Report back
*Dont use fastboot installer do it the old way then
*Don't upgrade directly to 2.3 do it step by step 2.1 to 2.2 then 2.2 to 2.3
I was on WinXP 32-bit and now switched to my laptop with Win7 64-bit.
Now I have a problem with drivers. When plugging in, windows is trying to install drivers for 3 devices:
-LGE Android Platform Composite Device - SUCCESFULLY
- 2 unknown devices - just says 'installing drivers' but no succes
I have installed all drives that were in that .zip just like on the first PC but this isn't working here.
I tried to flash anyway with KDZ, but it says that 'phone was not found' and after that just 'finished'.
i flash mine with win7 64bit no probs for drivers i just keep trying to let it update from windows update and they work
OK, I somehow managed to get the KDZ starting the software update on my laptop but just like on my PC earlier it stucks on the exaxt same line:
14:08:46: Smart :wParam= 205; iParam = 215
After that I hear the 'USB-plugging-in/out'- sound while windows is starting again searching for some drivers.
Since this is the same problem just like on the other PC i suppose something is seriously messed up with the phone and I should just bring it to the repair center.
I have installed swift droid on my GT540 and tommorow i wanted to change the the system to 4.0 by Mike Gapinski. Before flashing mike gapinski's rom i tried to install the original android and id failed. Now after LG logo there's a linux kernel panic
Process init (pid: 1). I've tried flashing with kdz updater on EMERGENCY and CS_EMERGENCY with that V20_a French rom but the log got stuck at wParam=205 lParam=215 and after it the phones reboot and kdz doesnt do anything more.
Please help me!
Generalil said:
I have installed swift droid on my GT540 and tommorow i wanted to change the the system to 4.0 by Mike Gapinski. Before flashing mike gapinski's rom i tried to install the original android and id failed. Now after LG logo there's a linux kernel panic
Process init (pid: 1). I've tried flashing with kdz updater on EMERGENCY and CS_EMERGENCY with that V20_a French rom but the log got stuck at wParam=205 lParam=215 and after it the phones reboot and kdz doesnt do anything more.
Please help me!
Click to expand...
Click to collapse
are u able to enter recovery / fastboot mode?
Download mode only
Use kdz updater to flash a 2.1 rom that has fastboot enabled. Use cs_emergency mode (phone in download mode).
When it finishes (or just stops) pull the battery then put it back in and go straight to fastboot.
Connect to pc and do:
fastboot erase boot
fastboot erase system
fastboot erase cache
Then flash recovery back on. Then use recovery or fastboot to flash whatever rom you want...
Sent from my LG GT540 Swift
Generalil said:
I have installed swift droid on my GT540 and tommorow i wanted to change the the system to 4.0 by Mike Gapinski. Before flashing mike gapinski's rom i tried to install the original android and id failed. Now after LG logo there's a linux kernel panic
Process init (pid: 1). I've tried flashing with kdz updater on EMERGENCY and CS_EMERGENCY with that V20_a French rom but the log got stuck at wParam=205 lParam=215 and after it the phones reboot and kdz doesnt do anything more.
Please help me!
Click to expand...
Click to collapse
Hi my friend, i've experimented this problems months ago, when i started with my phone..
This is the only solution i found, risking:
Follow the same process, and when the log got stuck at wParam=205 lParam=215, disconnect the phone, wait 2 seconds, and reconnect in download mode, the process in kdz will continue until the end..
We hope your results
When i bricked my phone too the process in KDZ used to freeze at the same point as yours...just be a little more patient and the process will proceed and everything will be ok..KDZ is a very useful tool at times like it..
Stuck
After flashing to European ROM-fastboot its stuck at android logo. Any other roms causes nothing to happen.
Help
Anyone knows what to do? I dont have warranty.
One of my friend had the same problem (stuck at android logo), I don't remember exactly how we fixed it, but we fixed it by trying everything written on XDA.
IIRC we tried a lot of ROMs in normal and both emergency. Don't forget to close programs that could interfere with the flashing process (anti-virus and such)
My post isn't useful but it's to let you know that there's still a way to fix it.
Does he remember what was the topic?
Generalil said:
After flashing to European ROM-fastboot its stuck at android logo. Any other roms causes nothing to happen.
Click to expand...
Click to collapse
After flashing European rom from kdz, you must enter in fastboot mode and flash whatever personalized rom you want.. swiftdroid asis, utopia, ics beta 4..
To enter in fastboot mode turn off your phone and then press camera button + power..
Thanks
Thanks ! It worked !
Thank you all!
followed instructions but stuck now
I have goofed up big time in trying to roll back Android 2.3.7 Gingerbread (Swiftdroid) CM 7.1 to stock. I used KDZ updater and got up to "Smart : wParam = 205, lParam = 215". Then the it stops and the phone tries to reboot and is no longer recognized by windows vista. The phone scree shows:
[Blue Error Handler] Arm11 is Crashed !!
[Press Volume up key] Reboot&savelog
[Press Volume down
--------------------------------------------------------------------
Linux Kernel Panic
Process init(pid: 1)
--------------------------------------------------------------------
There are multiple lines after that which fill rest of the screen. I guess I can take a photo and post it if required.
I followed the above advice, put the phone in Download mode and left KDZ to finish. then I got this log:
21:51:54 : Smart : wParam = 205, lParam = 212
21:58:35 : Smart : wParam = 12, lParam = 0
21:58:37 : Step Complete : UPDATE FINISHED!
21:58:37 : ResetStartInfo() Call
21:58:37 : _DetachDLL Call
21:58:37 : _DetachDLL Call End
21:58:37 : FreeLibrary Call
21:58:37 : FreeLibrary Call End
21:58:37 : ResetStartInfo() Call End
21:58:37 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
21:58:37 : ===FINISHED===
However the phone on rebooting is still showing the same -
[Blue Error Handler] Arm11 is Crashed !!
[Press Volume up key] Reboot&savelog
[Press Volume down
--------------------------------------------------------------------
Linux Kernel Panic
Process init(pid: 1)
--------------------------------------------------------------------
What to do ?
---------- Post added at 10:57 PM ---------- Previous post was at 10:07 PM ----------
OK. I used KDZ to flash romfastboot, then reinstalled Android 2.3.7 Gingerbread (Swiftdroid) CM 7.1 and all is well again.
Maybe (just maybe) you're flashing a wrong image...GT540 is ARM6 based not ARM11 as the message says.
revertm said:
Maybe (just maybe) you're flashing a wrong image...GT540 is ARM6 based not ARM11 as the message says.
Click to expand...
Click to collapse
arm V6 = arm 11
I am having this exact same problem, but the solution wasn't clearly written in this thread....
Whichever rom I try and flash using KDZ, they all get stuck at the android boot logo when trying to turn the phone on.
But so what exactly is the solution please??
Mate it's a 3 year old thread, but I might just have the solution somewhere just give me til tomorrow.
Sent from my Nexus 5 using Tapatalk
Generalil said:
Mate it's a 3 year old thread, but I might just have the solution somewhere just give me til tomorrow.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Cheers thankyou.
This has literally ruined my entire life currently, as having my phone broken has made me lose so much stuff in my job and everything.
Ive looked all over this forum and others but everyone just keeps saying the same rubbish about ''flashing using kdz'',
but that simply doesn't work, and the kdz tool is just a piece of crap in my view!!
But so if you know the actual solution il appreciate it so much
What KDZ images did you try to flash? (BTW KDZ is the only way out of this situation). What exactly does your screen say while booting?
In my case, from what I remember, I either tried flashing one of the multiple images published in this forum and it just clicked, or i may have tried unplugging the phone while flashing with KDZ just to see if breaking it further may undo the damage done before, but that is the last resolve.
When you post additional info and whether you want/can try some possibly bricking techniques I can help you more.
Till then mate.
Generalil said:
What KDZ images did you try to flash? (BTW KDZ is the only way out of this situation). What exactly does your screen say while booting?
In my case, from what I remember, I either tried flashing one of the multiple images published in this forum and it just clicked, or i may have tried unplugging the phone while flashing with KDZ just to see if breaking it further may undo the damage done before, but that is the last resolve.
When you post additional info and whether you want/can try some possibly bricking techniques I can help you more.
Till then mate.
Click to expand...
Click to collapse
I managed to unbrick it yesterday.
I used KDZ, cs-emergency, it was saying phone not found but using a trick from a page on facebook I removed the battery and reconnected the usb (it showed a screen saying it needed battery), but KDZ detected phone and it flashed 2.1 (update 1) which I think was a stock rom.
I then managed to get it back to 4.2.1 rom by using fastboot to flash 2.3.3 rom,
then using fastboot again to flash 2.3.7 rom,
and then using recovery to install 4.2.1 rom from zip.
Im still having the exact same problem with the phone as before though,
as when I try and use Mounts2sd, the phone just screwsup totally.
Its because it always says ''error mounting sd-ext''.
I cannot use the phone without mounts2sd though, since there isn't enough memory for even 1 app without it! :'(
But re-partitioning sd cards just destroys them.
I had to go and buy yet another sd card today as the other 2 had been ruined totally by the phone!!
I tried to re-flash the 2.1 rom via fastboot and also tried through recovery.
When trying through fastboot and KDZ the phone wont get detected by KDZ (removing the battery now doesn't make any difference like it did yesterday as it wont do that same screen it did yesterday),
and when I tried to flash a 2.1 rom I found via recovery it just showed a screen saying loads of errors and that my rom couldn't allow that, and then the phone wouldn't turn on just kept getting stuck at the cyanogen logo.
So I had to go and buy a brand new sd card, put it into my computer, put the 4.2.1 rom onto it, start phone in recovery which it could still get to luckily, and then install that rom again.
But so now I have a phone that is on 4.2.1 rom, will turn on ok, but cos there is an issue with the SD-ext mounting,
I cannot install mounts2sd, and so cannot use the phone!! :'( :'(
Hi. i think i just bricked my gf's phone and i can go only in download mod all button combinitions (for recovery,emergency) even when i press the power button is booting in downoad mod. i installed latest drivers and tried all flash tutorialls with KDZ and i get this error (atachment). even if i flash in normal or emergency. the point is that pc is recognized that smth is connected. also i disable lg modem. i think i didnt 1st time so this is the reason that bricks. i hope i get a solution soon. thank you!
Anyone please!!!
Sent from my C2305 using xda app-developers app
from 110 ppl none knows how to help me?
Are you sure you set TYPE to 3GQCT and Phonemode to DIAG and are you sure you have the right ROM and also make sure you installed msxml file.
Also try taking out battery and checking if any of the volume buttons are stuck
CCrack said:
Are you sure you set TYPE to 3GQCT and Phonemode to DIAG and are you sure you have the right ROM and also make sure you installed msxml file.
Also try taking out battery and checking if any of the volume buttons are stuck
Click to expand...
Click to collapse
i need to see the log
but for now take out your battery, and plug your phone into your computer via USB while holding volume up.
now go to KDZ updater
set it to 3GQCT and the next option to EMERGENCY
select your KDZ file
then click launch software update.
if it gives you errors dont worry just wait for it to finish. (if the program freezes dont worry just wait it out)
thats it just wait for you phone to reboot on its own and you should be good
i search internet about my problem but i cant find anything. i need help. there is no solve for my problem.but i want to be couldnt find.
my phone is e612 lg l5 i was try root with framaroot. it was done . supersu worked normaly. after that i was try bootunlock and cwm but i didnt success. then iwas read about kdz and begin to try with v20c firmware. i try open with download mode step by step like many youtube video still kdz got error " upgrade error wparam 100 lparam 500" and my phone bricked jusst show "download is in prograess do not unplugg" i was try also but never gone recovery mode etc. i did many things(start with batery withotut battery or sim or sdcard, hardreset combination or recovery combination) but phone just brickked just show download is in progress.
after that when i was try same things on an otther computer, kdz got " phone not found ". after every my test in other computer kdz just stopped working....
what can i do please help me . i didnt do it just bricked im feeling like fool....
solomonn said:
i search internet about my problem but i cant find anything. i need help. there is no solve for my problem.but i want to be couldnt find.
my phone is e612 lg l5 i was try root with framaroot. it was done . supersu worked normaly. after that i was try bootunlock and cwm but i didnt success. then iwas read about kdz and begin to try with v20c firmware. i try open with download mode step by step like many youtube video still kdz got error " upgrade error wparam 100 lparam 500" and my phone bricked jusst show "download is in prograess do not unplugg" i was try also but never gone recovery mode etc. i did many things(start with batery withotut battery or sim or sdcard, hardreset combination or recovery combination) but phone just brickked just show download is in progress.
after that when i was try same things on an otther computer, kdz got " phone not found ". after every my test in other computer kdz just stopped working....
what can i do please help me . i didnt do it just bricked im feeling like fool....
Click to expand...
Click to collapse
Did you put your phone into emergency mode when using KDZ?
I have the same problem
TahaX said:
Did you put your phone into emergency mode when using KDZ?
Click to expand...
Click to collapse
I tried to flash to android 4.1.2, then KDZ post an error on the log. My phone didn't reboot like it was suposed and got stuck on "Download is in progress" screen. I tried to do hard reset, use KDZ with official firmware, but only shows that screen
Hi everyone,
I ****ed up, i know... i had some problems with my G2, the last restauration was with : Europe OPEN D80220H_00.kdz
But i clicked by accident on a buttom from a program saying "fix the partitions problems", after that, the G2 crashed and black screen.
The phone was lighting and i saw everypartitions when it was plugued on my computer, but asking for a format on each partition. so i decided to use this :
http://forum.xda-developers.com/showthread.php?t=2582142
But i ****ed up again and i think it's because i used the wrong files, i used : BIN_LGD802AT-00-V10b-SEA-XX-SEP-04-2013-32G.zip (i don't know if it's because of that ? )
after that, the phone isn't reconized at all from windows and ubuntu... the drivers can't be reconized
I can't see any partition now, so i can't do it again. I don't know what to do now.
I fount another tutorial for extract every img files from my own kdz : "Europe OPEN D80220H_00.kdz" but i can't put them on the phone anymore.
Version : Europe OPEN D80220H_00.kdz
Tel : LG G2 D802 32G Blanc
Thanks in advance !
i'm not able to understand if it is QH USB 9006 or 9008 - you should try contacting member "tungkick" on this forum
sandys1 said:
i'm not able to understand if it is QH USB 9006 or 9008 - you should try contacting member "tungkick" on this forum
Click to expand...
Click to collapse
why ? he will be able to help me ?
Will try, thanks !
Something new :
I have finally set my phone on "download mode" EVEN IF my screen is always black so i dont see ANYTHING on the screen. But i just know that he is really download mode cause i press "top buttom" during puting my usb cable and the connection is faster.
BUT, i tried to use the LGFlashTool (with the tuto) and it says some error "EMEI" and "PID" NULL.
So the program doesn't want to continue :/