Related
CHRISTMAS & NEW YEAR
SANTA CLAUSS GIFT!!!
Merry christmas xda
disclaimer note
enter at your own risk
its no my responsibility for damage will cost flashing this rom
kernel:
we upgrade kernel to 3.1.1 and cwm to 6.0.1.5 thanks to TEAM DRH and Whyberg without them ... nothing could be done
they have switch lp mode beacause suspends to lp1 and fixed automatic brightness mode
kernel support 3g devices
camera works mostly for SKYPE!!!!
rom:
Changelog:27/1/2013
usb debugging on
camera stability
perfomance improve
download from here
http://www.mediafire.com/?x7hyragtaojyzxm
Changelog:10/1/2013
16 bit transparency fix glitches
wifi improve for flash player 11
download from here
http://www.4shared.com/zip/pOzFOiUz/G-PACK_smba9701tegra3v7.html
Changelog:6/1/2013 *******need 1gb ram to upgrade
lzo_compress
lzo_decompress
download from here
https://www.4shared.com/zip/1NelrpYd/G-PACK_smba9701tegra3v5.html
Changelog:4/1/2013 *******need 1gb ram to upgrade
firmware and hw upgrade
fix chrome lag
download from here
http://www.mediafire.com/download.php?pyq6ubql7geozi2
Changelog:1/1/2013 *******need 1gb ram to upgrade
This update is with lp mode switcher on
Download from here
http://www.mediafire.com/download.php?b3uz6s28d45m6dx
Always jellous gtab which had more options to use either honeycomb (older) or more than one roms jb
at past always was trying but bootloaders was diferent
from previous ics cwm had the oppotunity to flash gtab roms
new kernel give to flash whattever you like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/I
Thanks to redeyedjedi for this great compile !amazing !!!!!!
Thanks to tjohnsonjr for new boot.img. launcher and 4.2 clock
here is all gtab goodies to ONE
DOWNLOAD NEW CWM AND KERNEL
http://www.mediafire.com/download.php?2qtnmndf9dns2i3
DONLOAD ROM
http://www.4shared.com/zip/jpTX6WlE/G-PACK_smba9701tegra3.html
DOWNLOAD GAPPS
http://www.mediafire.com/download.php?yh99o88bie5iw66
1-APX MODE and go to OTA 20105024
2-CWM format Factory reset and wipe data(twice for sure)
3-APX MODE nvflash new kernel and new cwm
4-CWM 6.0.1.5 Wipe cache first and then Flash new rom and gapps
5-CWM 6.0.15 Wipe dalvik cache
6-REBOOT
FIRST LOAD OVER 4 MINUTE
TWEAKS
SET AS
OVERCLOCKING FROM BOOT.IMG SET POWERSAFE OPTION
SET FREE MEMMORY
AUTOBRIGHTNESS ON
SCREENSHOTS
IF YOU LIKE MY JOB BUY ME A BEER
for future use
I am confused, will this work on GTablet?
SoNic67 said:
I am confused, will this work on GTablet?
Click to expand...
Click to collapse
No it won't. I thought tjohn was still using 2.6.39. Either way the new kernel has a camera fix, but but it don't work on all gtabs yet, mine and one of fosser's at least. they had not released anything publicly yet either so unless whyberg finished it for 9701 some will have no camera either.
Whyberg s kernel suport camera tjonh boot img is based to tegra 3 kernels and change only cpu but has cpu right cache
Happy new year
Update
For 1gb devices fully working pmstuff script
Only charge with device on receipte sod or after long 3and over hours standby sleep
Low Batterry stats
[/IMG]
Take the update and have in mind to wipe dalvik cache after
So what the HECK is this?!?!
update
we upgrade but has to do the process from begin
after this i will test 4.2
i thing now have power for this
aokp nexus 7 hw and firmware ellement added
I'm sorry if I don't understand, but does this belong here?
Gtab testing
Ok looks like someone will have to bite the bullet here, so I am going to put my Gtab on the block and see if this thing can function on it. As there is a lot of contradictory language on this page, it may or may not work, but if it does I'll let you know! Wish me luck...
---------- Post added at 12:34 AM ---------- Previous post was at 12:10 AM ----------
jcp171 said:
Ok looks like someone will have to bite the bullet here, so I am going to put my Gtab on the block and see if this thing can function on it. As there is a lot of contradictory language on this page, it may or may not work, but if it does I'll let you know! Wish me luck...
Click to expand...
Click to collapse
Ok so clearly the CWM is not meant for GTABs because when I try to flash the 512mb version I get this:
D:\Users\Joe\Downloads\nvflash_cwm6.0.1.5\nvflash_cwm6.0.1.5>"nvflash.exe" --bct
device.512MB.bct --setbct --bl bootloader.bin --configfile device.emmc.16GB.512
M.cfg --odmdata 0x8b0c0011 --create --go
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x1714404642007617
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: nand
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: device.512MB.bct
- 4080/4080 bytes sent
device.512MB.bct sent successfully
odm data: 0x8b0c0011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 945472/945472 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: specified device is not the boot device (code: 17) message: n
verror:0x4 (0x4) flags: 0
after that the screen starts to look banded and glows bright white at which point I turned it off!
I tried a couple times just to be sure.
Now I am going to try flashing the team DRH 350mb prep and see if that makes a difference as a base.:silly:
UPDATE: No dice...trying CWM 5504 as the base rather than the provided one and then I'll drop the ROM...pray for me, I fear this won't be pretty
---------- Post added at 12:45 AM ---------- Previous post was at 12:34 AM ----------
I tested this every which way I can think of. No way will it apply to a Gtab...unless someone knows better, I'd say 100% not a Gtab rom...
jcp171 said:
Ok looks like someone will have to bite the bullet here, so I am going to put my Gtab on the block and see if this thing can function on it. As there is a lot of contradictory language on this page, it may or may not work, but if it does I'll let you know! Wish me luck...
---------- Post added at 12:34 AM ---------- Previous post was at 12:10 AM ----------
Ok so clearly the CWM is not meant for GTABs because when I try to flash the 512mb version I get this:
D:\Users\Joe\Downloads\nvflash_cwm6.0.1.5\nvflash_cwm6.0.1.5>"nvflash.exe" --bct
device.512MB.bct --setbct --bl bootloader.bin --configfile device.emmc.16GB.512
M.cfg --odmdata 0x8b0c0011 --create --go
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x1714404642007617
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: nand
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: device.512MB.bct
- 4080/4080 bytes sent
device.512MB.bct sent successfully
odm data: 0x8b0c0011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 945472/945472 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: specified device is not the boot device (code: 17) message: n
verror:0x4 (0x4) flags: 0
after that the screen starts to look banded and glows bright white at which point I turned it off!
I tried a couple times just to be sure.
Now I am going to try flashing the team DRH 350mb prep and see if that makes a difference as a base.:silly:
UPDATE: No dice...trying CWM 5504 as the base rather than the provided one and then I'll drop the ROM...pray for me, I fear this won't be pretty
---------- Post added at 12:45 AM ---------- Previous post was at 12:34 AM ----------
I tested this every which way I can think of. No way will it apply to a Gtab...unless someone knows better, I'd say 100% not a Gtab rom...
Click to expand...
Click to collapse
Try to change your meta data unzip and replace metadata from gtab you re install to yaffs we install to mcc
jcp171 said:
Ok looks like someone will have to bite the bullet here, so I am going to put my Gtab on the block and see if this thing can function on it. As there is a lot of contradictory language on this page, it may or may not work, but if it does I'll let you know! Wish me luck...
---------- Post added at 12:34 AM ---------- Previous post was at 12:10 AM ----------
Ok so clearly the CWM is not meant for GTABs because when I try to flash the 512mb version I get this:
D:\Users\Joe\Downloads\nvflash_cwm6.0.1.5\nvflash_cwm6.0.1.5>"nvflash.exe" --bct
device.512MB.bct --setbct --bl bootloader.bin --configfile device.emmc.16GB.512
M.cfg --odmdata 0x8b0c0011 --create --go
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x1714404642007617
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: nand
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: device.512MB.bct
- 4080/4080 bytes sent
device.512MB.bct sent successfully
odm data: 0x8b0c0011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 945472/945472 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: specified device is not the boot device (code: 17) message: n
verror:0x4 (0x4) flags: 0
after that the screen starts to look banded and glows bright white at which point I turned it off!
I tried a couple times just to be sure.
Now I am going to try flashing the team DRH 350mb prep and see if that makes a difference as a base.:silly:
UPDATE: No dice...trying CWM 5504 as the base rather than the provided one and then I'll drop the ROM...pray for me, I fear this won't be pretty
---------- Post added at 12:45 AM ---------- Previous post was at 12:34 AM ----------
I tested this every which way I can think of. No way will it apply to a Gtab...unless someone knows better, I'd say 100% not a Gtab rom...
Click to expand...
Click to collapse
Dont do this we have 1.1 bootloader
You will brik your tab
Try to change your meta data unzip and replace metadata from gtab you re install to yaffs we install to mcc
One more try
geowolf1000 said:
Dont do this we have 1.1 bootloader
You will brik your tab
Try to change your meta data unzip and replace metadata from gtab you re install to yaffs we install to mcc
Click to expand...
Click to collapse
I'll give that a try and let you know. Thanks
---------- Post added at 02:34 AM ---------- Previous post was at 02:13 AM ----------
jcp171 said:
I'll give that a try and let you know. Thanks
Click to expand...
Click to collapse
I replaced the 'metadata' file with one from the '[ROM-AOSP][BL-1.2]G-Harmony Jellybean 4.1.2 ODEXed (UPDATED 12/28)' rom after reformatting with the 350mb team DRH NVFlash prep.
This time it applied without error, but the apply finished in about 15-20 seconds and I doubt much if anything actually applied.
Stuck at birds, so safe bet we need to do more than just replace the metadata file...Thanks for trying though.
You mention changing the install to yaffs....where would I do that?
Give a try with right meta data
Aokp its different
And try with new boot img from 4.2
geowolf1000 said:
Give a try with right meta data
Aokp its different
And try with new boot img from 4.2
Click to expand...
Click to collapse
I confirmed the metadata is right. I used the newest rom posted here, but I COULD try the 4.2 boot image, but at that point, build.prop will be all wrong too so how much must be done just to get it to install and boot? Someone more skilled might need to do this right..
I'll try the 4.2 boot image from "[ROM] AOKP-4.2.1r1 & CM10.1 (WIP) 1/2/2013 TESTERS/CRACKFLASHERS ONLY" though and let you know.
---------- Post added at 02:53 AM ---------- Previous post was at 02:48 AM ----------
jcp171 said:
I confirmed the metadata is right. I used the newest rom posted here, but I COULD try the 4.2 boot image, but at that point, build.prop will be all wrong too so how much must be done just to get it to install and boot? Someone more skilled might need to do this right..
I'll try the 4.2 boot image from "[ROM] AOKP-4.2.1r1 & CM10.1 (WIP) 1/2/2013 TESTERS/CRACKFLASHERS ONLY" though and let you know.
Click to expand...
Click to collapse
Ok that was worse...crashes CWM...sorry I guess I am not smart enough to make this happen
this firmware will work on 512 mb ram(wifi only model)?
the usb(usb stick and pc connection),camera,and suddlenly power off is fixed?
and the cpu clock is 1000 mhz or underclocked to 750 mhz?
I have try with t 1 gb ram
Camera is working
Sod is possible with long sleep and charging on
But you can handle
And speed will not dissapoint you
geowolf1000 said:
I have try with t 1 gb ram
Camera is working
Sod is possible with long sleep and charging on
But you can handle
And speed will not dissapoint you
Click to expand...
Click to collapse
you must flash the nvflash then flashing the rom and gapps?or you can just "jump"(i'm flashed the teamdrh cm10 recovery(just recovery because i have the android 4.0 ics from the evolio neura(androider.ro) nvflash and then just flashed via recovery(cwm 6) the rom and gapps)
is possible to overclock to the default speed(1000 mhz)?
and the usb conection(pc connection and usb stick)is avaible?
CaineRau said:
you must flash the nvflash then flashing the rom and gapps?or you can just "jump"(i'm flashed the teamdrh cm10 recovery(just recovery because i have the android 4.0 ics from the evolio neura(androider.ro) nvflash and then just flashed via recovery(cwm 6) the rom and gapps)
is possible to overclock to the default speed(1000 mhz)?
and the usb conection(pc connection and usb stick)is avaible?
Click to expand...
Click to collapse
You have different cwm bea ause
You have different partion storage whyberg try for your partion to configure cpu cache
And make a new cwm seperetly from ours
Paste your cwm to this nvflash and flash
To our devices the pc connection and usb work fine try this rom have different compile from teamdrh but is based to this
Speed is not the problem
geowolf1000 said:
You have different cwm bea ause
You have different partion storage whyberg try for your partion to configure cpu cache
And make a new cwm seperetly from ours
Paste your cwm to this nvflash and flash
To our devices the pc connection and usb work fine try this rom have different compile from teamdrh but is based to this
Speed is not the problem
Click to expand...
Click to collapse
ok.
the cwm is not in this nvflash?
in this post you say this rom is only for 1gb(with 3g) version.i don't want brick my tablet so...
and this is for 16gb storage(you know in the russian discution about jelly bean on malata(3q surf as rebranded in Russia) they talked about a 8gb version and our rebranding of malata t8 is evolio neura and these tablets have just 16gb version)
I am giving link for local update 6.0 EMUI 4.0 Honor 7 Indian version...
https://drive.google.com/file/d/0ByJkSOohdNz_RFdzOEtPVXhGRFE/view
About the update
Before updating your phone, please carefully read the Software Update Guideline
provided with the update package and back up your personal data to prevent any
possible data loss.
1. This update will update your system to Android 6.0. If some third-party apps are
incompatible with Android 6.0, update these apps to their latest versions in Google
Play. After the update, your home screen layout may be rearranged slightly.
2. OTA update: Update your phone from EMUI 3.1 to this version.
3. If your phone system has already been rooted, you may not be able to perform an
OTA update. In this case, download the full update package to update your phone.
4. Full package update: Update your phone from EMUI 3.1 to this version by
downloading and installing the full update package.
5. SD card update: Save the update package to the dload folder of your SD card. On
your phone, touch Settings > Update > Menu > Local update.
6. Version rollback: You will not be able to directly roll back to EMUI 3.1. To roll back,
contact one of the Huawei authorized service centers in your country or region and
obtain the Rollback Software.
7. Before the update, make sure your phone has sufficient battery level and storage
space. If you experience any issues during the update, please contact a Huawei
authorized service center.
About this version
[Camera]
New added professional mode. Under this mode, you can use professional
parameters in any combination to achieve the desired effect.
New Added document readjustment function. When enabled, you can clearly
capture the text content appearing the lens.
[Gallery] New added Paint filter, Feminine filter and Photo filter. You can get more amazing
images now.
New added various labels, you can change the font size, color and location now.
New added creating memo on images supports you customize the unique memo for
every image, and then set it as unique lock screen wallpaper.
New added sport watermark element. Now you can add altitude data and your note
on your travel photos.
Optimized album functions. Now you can bulk add photos for new album. This
greatly simplifies the process of creating an album and then adding photos to it.
Support you to print multiple images one time. It can save all selected images for
printing as PDF and print them together.
[Contracts]
New added Smart group function will help you to group your contracts according to
company or organization names. If you want to group your contracts by this way,
you just need to add company or organization names in contracts’ information. Your
contracts will be automatically grouped.
[Messages]
New added quickly reclaiming sending message, within 4 seconds after sending a
message, you can reclaim it if you regret.
[Application]
New added a compass application, it integrated the functions of level gauge and
compass.
New added alarm ring duration selections, now how long the alarm will ring all
depends on you!
[System]
New added screen recording function, with it enabled, you can easily record your
screen operating steps, then make it to a small course and share with others.
[Settings]
New added eyesight protection mode in Display settings, when enabled, the
backlight will be soft. It’s very helpful to relax your eye muscles keeping your eyes
healthy.
New added scheduled power on and power off functions, when enabled, your
phone will auto power on and off, you will have a regular lifestyle which is very
important to your healthy.
New added notification panel and status bar will be convenient to look up some
settings.
Optimized tone settings adding power on tone, screenshot tone and emergency
tone switches.
Flashed and ended up in bootloop
Can you please upload some screenshots....
Sent from my PLK-UL00 using XDA Free mobile app
Hi Sagar,
Did you provide your 15 digit IMEI number in the Facebook link or the 16 digit IMEISV, which is by discarding the last digit (check digit) from IMEI and replacing it with the 2 digits for the IMEI SV number
Screenshot..
reubend said:
Can you please upload some screenshots....
Sent from my PLK-UL00 using XDA Free mobile app
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update
Jagermeister02 said:
Flashed and ended up in bootloop
Click to expand...
Click to collapse
Give you previous build number
Update installed as per instruction or not
Can anyone post a link to B160 Recovery
---------- Post added at 10:16 PM ---------- Previous post was at 10:15 PM ----------
Can anyone post a link to Recovery for B160
Hi,
I have updated to B304. But it is not so good. Please pose roll-back software.
Thanks
Hey
Now on tap doesnt work for me at all. After the update
roll-back software
Neo+6210 said:
Hi,
I have updated to B304. But it is not so good. Please pose roll-back software.
Thanks
Click to expand...
Click to collapse
You can contact huawei service center for roll-back software because (plk-ul00c675b160/170) Full package not available at any website.
other wise you can wait till Feb-2016. stable rom release in feb
this rom is beta version for testing so not good as stable rom.
hi guys
did anyone help me to install fonts EMUI 4 andorid 6 on honor 7 ?
---------- Post added at 10:16 AM ---------- Previous post was at 10:12 AM ----------
I received android 6 today from company and install carefully without any error
only I need who install fonts ...
---------- Post added at 10:17 AM ---------- Previous post was at 10:16 AM ----------
Meid : C064
sagar.sabhaya said:
You can contact huawei service center for roll-back software because (plk-ul00c675b160/170) Full package not available at any website.
other wise you can wait till Feb-2016. stable rom release in feb
this rom is beta version for testing so not good as stable rom.
Click to expand...
Click to collapse
Thanks man
SUCCESS ... but "Move to SD Card" Issue
Downloaded the file; installed the full update successfully.
Having few issues with the new UI/OS though
- foremost is that i seem to have lost the "Move to SD Card" option for apps completely !
Even though my default save location is set to SD card, new apps gets installed in Internal storage only; and for the already installed ones, the "Move to SD Card" button is nowhere to be seen
Everyone has the same issue?
---
I hope its a bug which would be fixed soon rather than a feature we have to live with.
seethahere said:
Downloaded the file; installed the full update successfully.
Having few issues with the new UI/OS though
- foremost is that i seem to have lost the "Move to SD Card" option for apps completely !
Even though my default save location is set to SD card, new apps gets installed in Internal storage only; and for the already installed ones, the "Move to SD Card" button is nowhere to be seen
Everyone has the same issue?
---
I hope its a bug which would be fixed soon rather than a feature we have to live with.
Click to expand...
Click to collapse
I have the same issue.. N plus there is no now on tap.. Is it working for you?
app 2 SD
seethahere said:
Downloaded the file; installed the full update successfully.
Having few issues with the new UI/OS though
- foremost is that i seem to have lost the "Move to SD Card" option for apps completely !
Even though my default save location is set to SD card, new apps gets installed in Internal storage only; and for the already installed ones, the "Move to SD Card" button is nowhere to be seen
Everyone has the same issue?
---
I hope its a bug which would be fixed soon rather than a feature we have to live with.
Click to expand...
Click to collapse
you can search app from Play store for Move to SD Card.
In play store so many app available for this. like app2sd etc.
sagar.sabhaya said:
you can search app from Play store for Move to SD Card.
In play store so many app available for this. like app2sd etc.
Click to expand...
Click to collapse
Yes of course, there are a plenty of Apps available, but NONE WORKS in our situation.
They don't work for the simple reason - app2sd kind of apps basically take us to the system storage settings where we need to click the "move to SD" button - and that button is not to be seen in our situation. SO, NO MOVE TO SD POSSIBLE.
No issues with SD card detection - it shows up in file manager, my camera pics still gets stored there - its just the app installation for which the sd card seem to be unavailable...
... and a whole bunch of apps that used to be previously installed in the SD card have kinda 'disappeared' - i mean, i can still see the ghost app folder if i browse to the SD card using a file manager, but the App itself isn't installed and doesn't show up in the list of installed apps.
Default storage location
seethahere said:
Even though my default save location is set to SD card, new apps gets installed in Internal storage only;
Click to expand...
Click to collapse
Hi there,
I'm on B313 PLK-L01 (EU version), and I was able to install Spotify (incl. offline downloads) to the SD card. I selected SD card for Default location, restarted the phone, and installed Spotify. Later I reverted it back to internal storage, as I want the SD card for Spotify music, mostly.
It worked, my Spotify folder in the SD card (Android/data/com.spotify.music) currently contains almost 5GB, and the one on internal memory is empty. So there is hope, at least.
boombuia said:
Hi there,
I'm on B313 PLK-L01 (EU version), and I was able to install Spotify (incl. offline downloads) to the SD card. I selected SD card for Default location, restarted the phone, and installed Spotify. Later I reverted it back to internal storage, as I want the SD card for Spotify music, mostly.
It worked, my Spotify folder in the SD card (Android/data/com.spotify.music) currently contains almost 5GB, and the one on internal memory is empty. So there is hope, at least.
Click to expand...
Click to collapse
Glad to hear that mate - gives a glimmer of hope that the problem may indeed be a bug that would be addressed soon
---------- Post added at 08:43 PM ---------- Previous post was at 08:11 PM ----------
Just in case my point about app2sd kind of apps don't work wasn't clear - here's a screenshot
---------- Post added at 09:15 PM ---------- Previous post was at 08:43 PM ----------
Hi guys
Just noticed another bug with the new UI/OS
I usually save all my phonebook contacts on my google account (like many android users, im guessing)...
In the contacts settings, we used to have an option to "display only contacts with phone numbers" ...or something similar - remember?
That seems to be missing now.
So, what happens is, when i set my phonebook to display my google account contacts, i get like 1000+ contacts from gmail (with email addresses, WITHOUT phone numbers). These are NOT unwanted entries - i need their email addresses for communicating and stuff - i just don't want them to be displayed in my phonebook)
...and i guess that's exactly why the feature of "display only contacts with phone numbers" was brought in. AND THAT SEEMS TO BE MISSING IN THE CURRENT OS/UI.
---
I SINCERELY HOPE THAT DEVELOPERS @ HUAWEI ARE AWARE / TAKING NOTE OF THESE BUGS AND WORKING ON FIXES
---
May be i should get in to the huawei forums and post these thing there ...? Yeah, that makes sense ... i will try.
PLK - UL00C675B320 Available now for India
AmitJordy said:
PLK - UL00C675B320 Available now for India
Click to expand...
Click to collapse
I'm No getting any Update
Hi I have a bug since marshmallow and was wondering if there is an alternative
Everytime I try to record my screen with the default recorder (holding home button)
It fails and gives me a message not enough storage however I have 3 gb over on internal and 35 gb on external
_________
check out my new Android game https://play.google.com/store/apps/details?id=com.pgviews.kobesadventure
ShadowRii said:
Hi I have a bug since marshmallow and was wondering if there is an alternative
Everytime I try to record my screen with the default recorder (holding home button)
It fails and gives me a message not enough storage however I have 3 gb over on internal and 35 gb on external
_________
check out my new Android game https://play.google.com/store/apps/details?id=com.pgviews.kobesadventure
Click to expand...
Click to collapse
Me too !
hokuto34 said:
Me too !
Click to expand...
Click to collapse
With 3.2
If record don't work at all verify in settings/Storage reset that you have no Network Storage connected from your computer ! That fixed the issue for me !
And if you have an external hd, the files are on it at :
MYHHD/Android/media/com.nvidia.nvgamecast
---------- Post added at 07:42 PM ---------- Previous post was at 07:41 PM ----------
ShadowRii said:
Hi I have a bug since marshmallow and was wondering if there is an alternative
Everytime I try to record my screen with the default recorder (holding home button)
It fails and gives me a message not enough storage however I have 3 gb over on internal and 35 gb on external
_________
check out my new Android game https://play.google.com/store/apps/details?id=com.pgviews.kobesadventure
Click to expand...
Click to collapse
With 3.2
If record don't work at all verify in settings/Storage reset that you have no Network Storage connected from your computer ! That fixed the issue for me !
And if you have an external hd, the files are on it at :
MYHHD/Android/media/com.nvidia.nvgamecast
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS THREAD IS NOT MONITORED, ANY HELP REQUEST/QUESTION/BUG SUBMISSION MUST BE POSTED INTO THE TELEGRAM GROUP OR THEY WILL BE IGNORED
WakeBlock is an app that, through a system modification, allows users to block or limit any system wakelock, without the need of any kind of framework.
Currently, we support all versions of Android from Nougat 7.0 to Q 10. We plan to continue the support for future Android version, while anything under Android 7.0 won't be supported. While the patch is supposedly working on ANY device, we won't know unless we try. So try this and let us know!
Recently, we updated the coremod for better compatibility and even added Dark Mode!
This modification can be applied Systemless-ly with Magisk, by creating the Magisk Module from inside the app.
The app is currently in beta stage, so is missing many features we plan to implement in future releases.
Also, beware that the current version of the app is released for free, but it may become paid/donation based in the future.
/*
* #include <disclaimer.h>
*
* Your warranty is now void.
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Please read the FAQs before flashing it! YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, I will laugh at you.
* Hard. Really hard.
*
*/
Google Play Store Link
Patreon Link
Telegram Group
WANT TO INTEGRATE WAKEBLOCK IN YOUR ROM? CHECK THIS POST!
*** BUG REPORTS WITHOUT A LOGCAT WILL BE IGNORED AND LAUGHED AT ***
Special Thanks
@DEVILOPS 007 for testing and porting the initial release to various ROMs and devices
@SuperSandro2000 for helping testing the mod on Samsung devices
@TotemFallico for helping me with the support & development
XDA:DevDB Information
WakeBlock, App for the Huawei Nexus 6P
Contributors
GioBozza, TotemFallico, SimoIanni, pioccd, CappyT
Version Information
Status: Beta
Created 2017-08-15
Last Updated 2019-11-30
CHANGELOG
v0.2.0 (05/01/2018)
WakeBlock service binds on runtime (this means that, if the core mod is already installed, you do not need to reboot after app installation/update). The service status shown in the app will automatically update on service binding.
Automatic uninstallation/backup restoring
The app can fetch the core mod version
v0.1.8 (02/01/2018)
Fixed core mod classes patching
v0.1.7 (31/12/2017)
Fixed SELinux permissions acquisition
Started implementation of the auto-binding process to avoid reboot on app update (not yet functional)
v0.1.6 (29/12/2017)
Fixed repackaging phase on deodexed devices
v0.1.5 (25/12/2017)
Improved patcher process
Updated baksmali to v2.2.2 (not yet compatible with Android 8.1)
v0.1.4 (10/09/2017)
Fixed bootloop on Samsung devices
Auto-patcher process priority raised to avoid it being killed by the OS
Added Simplified Chinese localization
v0.1.2 (07/09/2017)
Auto-patcher process priority rised to avoid it being killed by the OS
Added Simplified Chinese localization
v0.1.1 (21/08/2017)
Added application automatic backup of previously detected wakelocks
Added support for localization
Removed auto-downloader (now obsolete)
v0.1.0 (17/08/2017)
Initial release
FAQ
Here you can find the most common questions and their respective answer. Simple as that. READ THEM.
Q - How do i use wakeblock?
A - Once you have installed the app, just open it and click on "Install Core Mod", the app will create the Core Mod needed for your device (this might take a while, from 5 to 30 minutes) and then will reboot the phone to flash it. When the phone has rebooted, open the app: If the message says "Service Bound" you're all set!
Q - How can i block wakelocks?
A - From within the app, just switch to the "Wakelock" tab. Here every wakelock recorded since the first boot with the core mod installed, so give it at least 2/3 days of normal use before blocking anything. Click on the wakelock you want to block, press the "Block" button and then set for how long is the wakelock gonna be blocked!
Q - Which wakelock should i block? For how long?
A - We suggest to check out this guide on XDA to fully understand what it means to block a wakelocks and how it affects your system.
Q - I'm lazy af and i don't want to read all of that, can't you give me a short list?
A - Ok, but we don't take any responsibilities if the phone bricks or your ROM explodes. You are totally free to change the blocking time value to make it as you please but, again, we don't take any responsibilities. You can find the list here. Remember: if you don't find one of the wakelocks, just check in later. If you still don't find it, don't worry at all! Side note: the search button is not case-sensitive.
Q - Can i block the [wakelock name] wakelock?
A - If it is part of the list linked above, you're good to go! If not, we can't assure a thing, but if you find any safe-to-block wakelock let us know!
Q - When is the new version/fix/graphic coming?
A - Do not ask for an ETA. We do this for free, without any ads in the app nor donation packages, we don't even put a price on our app. We all have jobs, university and a private life to manage, we don't have superpowers, so managing all of this takes time. Our free time is pretty short, but we usually put at least half of it on the developing of the app. Be patient and do not harass the team nor the telegram group.
Q - Your app killed [insert any feature here] in my phone!
A - Everything is done by user input, the app by itself (even with the core mod installed) doesn't do anything but reading which wakelock the system is calling. Unless you blocked something we didn't suggest you do to this problem and our app are totally unrelated.
Q - Your app is killing my battery life! WTF!
A - By itself, the app doesn't do anything even with the core mod installed. Keep WakeBlock whitelisted in every hybernation app (like Greenify) but the basic Android Optimization. If the battery drain has increased, double check what you blocked, that might be the reason!
Q - I just updated and it doesn't see the Core Mod!
A - It's a known bug. Check if the app kept all permission (Both root privileges and Storage permission) and simply reboot your phone. It will magically start to see it again! SIDE NOTE: you don't need to reinstall the Core Mod every time you update the app!
Q - How can i uninstall the app?
A - First of all, we are sad that you want to leave us. If you didn't install the Core Mod, or it failed in any way, you just need to delete the app and everything is gone! If you did install successfully the Core Mod, check the WakeBlock backup folder (/sdcard/WakeBlock/Backups). You will find a bunch of different folders with different dates and times. Pick the most recent one and look inside. Here, you will have one of two cases:
CASE 1: FILES = services.odex & and services.vdex | ODEXED ROM
In this case, boot into your custom recovery of choice (TWRP for example, you can't do it from a root explorer) and mount your /system partition. Now check both /system/framework/oat/arm and /system/framework/oat/arm64 for a service.odex and a service.vdex. Here, COPY (and DO NOT MOVE) the files from the backup and paste them to replace the files in your system (one of the two folders above). Now delete the app and you're now WakeBlock-free!
CASE 2: FILE = services.jar | DEODEXED ROM
In this case, boot into your custom recovery of choice (TWRP for example, you can't do it from a root explorer) and mount your /system partition. Here, COPY (and DO NOT MOVE) the file from the backup and paste it to replace the file in your system (in this case /system/framework). Now delete the app and you're now WakeBlock-free!
Q - YOUR APP DOESN'T WORK, WHY?
A - It works. We tested it (and we keep testing it) many times before committing an update! Double check permissons and give it a reboot, usually fixes most of the "doesn't work" problems.
Q - I found a bug! How can i report it?
A - First of all, check on the Telegram Group if anyone else had your problem, both by first searching and then asking directly. If no one can help you on the spot, send a ticket on the @wakeBlockSupportBot. It will ask for a logcat, so make sure you make one while you encounter the problem. DO NOT CONTACT ANYONE OF THE TEAM UNLESS EXPLICITLY ASKED TO.
Q - How do i take a logcat?
A - First of all, make sure that you have the needed Platform Tools. Due to the fact that the app reboots, it's better if you take it with a pc rathern than with an app. Plug the phone into your PC, you start the cmd.exe as administrator (or, if you use Linux, you need to open the terminal with root privileges) and run the command "adb shell", now the console will show the internal console of the phone. From there, run "su", a prompt will appear to your phone to ask for root permission. Approve it, then run "cd /sdcard/Download". Afterwards, run "logcat >> log.txt" (Nothing will appear on screen because it's redirecting every output to the log file). Now start the patch. When it gives the error (or after it reboots), close the app, click "Ctrl + C" to stop the logcat. Then, from the phone, send us the log.txt (you will find it in your Download folder).
Q - Wow! You guys are awesome!
A - Thank you!
TO-DO LIST
- Alarms. Yeah.
- Fixing problems related to some Samsung devices and Pixel devices
- Import/Export system for the blocked Wakelock
- Inserting the FAQ and the suggested wakelock-to-block list into the actual app
- Adding the feature to change the block time without unblocking the wakelock
- Various fixes and improvements
WANT TO INTEGRATE WAKEBLOCK IN YOUR ROM?
We decided to release the core part of the mod to let ROM developers integrate it in their own source code.
Here is the patch for you to simply drag on whichever version of android (should work on 7.x (maybe 6.x?)) and whichever device/ROM you want.
The only things we ask for are (that's not a legal license, but it can make us REALLY upset if you don't do that) :
- You shall credit @GioBozza for the mod by linking this thread in your ROM post (c'mon, don't write it in the bottom of the post, with size 1!)
- You may include this code to any non-commercial work (you can still get donations, we're cool with those!)
- You can not sell this code or get donations by the code of this mod alone
- You may include the free version of the apk in your ROM (in the future we may release a paid version or an unlock app. Of course, that can not be included.)
- You should redirect users here for support about the mod or the app itself
- You should have fun and save your battery
- You may need to drink some fruit juice afterwards - have that ready!
WHOOP, WHOOP - DOWNLOAD:
v0 Templates - platform/frameworks/base repository.
https://github.com/GiovanniBozzano/wakeblock
REMEMBER: the app takes no privileges at all to manage wakelocks. The ROM can even be without root!
Take note that we will update the "core" (android framework) part of the mod, from time to time. It is versioned, so you can keep track of what happened.
Cheers!
Thank you. Seems promising
Nothing shows up in the wake lock section for me
DEVILOPS 007 said:
Nothing shows up in the wake lock section for me
Click to expand...
Click to collapse
Uhm, service is BOUND or UNBOUND?
pioccd said:
Uhm, service is BOUND or UNBOUND?
Click to expand...
Click to collapse
It says service is unbound and I flashed the zip and then installed the apk.
DEVILOPS 007 said:
It says service is unbound and I flashed the zip and then installed the apk.
Click to expand...
Click to collapse
Please try to flash another time and reinstall the app.
DEVILOPS 007 said:
It says service is unbound and I flashed the zip and then installed the apk.
Click to expand...
Click to collapse
After installing the apk, reboot the phone. It should say now "service bound"
pioccd said:
Please try to flash another time and reinstall the app.
Click to expand...
Click to collapse
I tried flashing again and installing the app but it still says unbound. Do I need to edit anything like build or host files?
DEVILOPS 007 said:
I tried flashing again and installing the app but it still says unbound. Do I need to edit anything like build or host files?
Click to expand...
Click to collapse
Are you on rooted stock 7.1.1? We tested on that, and well... it works. Just needs a reboot after app install and it will continue to work across reboots.
CappyT said:
Are you on rooted stock 7.1.1? We tested on that, and well... it works. Just needs a reboot after app install and it will continue to work across reboots.
Click to expand...
Click to collapse
I'm on resurrection remix 7.1.1 and flash kernel. I guess it isn't supported on this yet but it is only alpha so no worries if I can't get it to work.
DEVILOPS 007 said:
I tried flashing again and installing the app but it still says unbound. Do I need to edit anything like build or host files?
Click to expand...
Click to collapse
*** HAVE A BACKUP READY FIRST ****
Try this:
- Download the odex file here (it's the same that you find in the archive, if you want to save data, extract the flashable archive)
- Move the file (with any file browser with root support) to /system/framework/oat/arm64 and replace if asked
- The phone (could) instantly reboot. If not, check if the permissions are rw-r--r-- (644)
- Reboot
It says unbound after I rebooted
---------- Post added at 11:29 PM ---------- Previous post was at 11:27 PM ----------
CappyT said:
Try this:
- Download the odex file here (it's the same that you find in the archive, if you want to save data, extract the flashable archive)
- Move the file (with any file browser with root support) to /system/framework/oat/arm64 and replace if asked
- The phone (could) instantly reboot. If not, check if the permissions are rw-r--r-- (644)
- Reboot
Click to expand...
Click to collapse
Okay about to try, I really appreciate the help BTW you're a very nice person. Whether this works or not thank you.
---------- Post added at 11:32 PM ---------- Previous post was at 11:29 PM ----------
There are no folders in the system framework folder. Only files.
---------- Post added at 11:32 PM ---------- Previous post was at 11:32 PM ----------
Should I add the folders?
DEVILOPS 007 said:
It says unbound after I rebooted
---------- Post added at 11:29 PM ---------- Previous post was at 11:27 PM ----------
Okay about to try, I really appreciate the help BTW you're a very nice person. Whether this works or not thank you.
---------- Post added at 11:32 PM ---------- Previous post was at 11:29 PM ----------
There are no folders in the system framework folder. Only files.
---------- Post added at 11:32 PM ---------- Previous post was at 11:32 PM ----------
Should I add the folders?
Click to expand...
Click to collapse
Well. It means your rom is not odexed.
You can try by creating those folders and put that file there. Can't guarantee btw
DEVILOPS 007 said:
It says unbound after I rebooted
---------- Post added at 11:29 PM ---------- Previous post was at 11:27 PM ----------
Okay about to try, I really appreciate the help BTW you're a very nice person. Whether this works or not thank you.
---------- Post added at 11:32 PM ---------- Previous post was at 11:29 PM ----------
There are no folders in the system framework folder. Only files.
---------- Post added at 11:32 PM ---------- Previous post was at 11:32 PM ----------
Should I add the folders?
Click to expand...
Click to collapse
Maybe I found a solution for you, I'm trying on my phone right now, I'll let yow know if it works ASAP
--------
Edit: It didn't work, still searching
SimoIanni said:
Maybe I found a solution for you, I'm trying on my phone right now, I'll let yow know if it works ASAP
Click to expand...
Click to collapse
Thanks Bro, I appreciate it. I dont know the difference between these rooms.
DEVILOPS 007 said:
Thanks Bro, I appreciate it. I dont know the difference between these rooms.
Click to expand...
Click to collapse
Hopefully you find something. Is it because some roms are aosp and some are odex or something? I'm confused about what the difference is and why it makes this mod not work.
DEVILOPS 007 said:
Hopefully you find something. Is it because some roms are aosp and some are odex or something? I'm confused about what the difference is and why it makes this mod not work.
Click to expand...
Click to collapse
Odexing is the way Android now uses to optimize code and generate .oat or .odex machine code files from .dex smali files.
Some ROMs are deodexed: this means all applications run on .dex files and sometimes even system modules (and that's your case).
Currently the mod is tied to the .odex file, but I'm going to support the deodexed version as well.
Note: PostmarketOS is in development. It cannot be used as a daily driver in this device (yet).
See README of installation HERE
DISCLAIMER
THESE IMAGES ARE TESTING ONLY. THEY ARE NOT BATTERY-OPTIMIZED AND THE TABLET GETS HIGH TEMPERATURE EASILY. USE AT YOUR OWN RISK, AND POWER OFF THE TABLET COMPLETELY IF NOT USING IT.
VIDEOS
* Showcasing Plasma Mobile:
* Showcasing Phosh:
Made with Blender 2.93.10 video editor.
* Video Backup: https://sourceforge.net/projects/sgalaxy-tab2-linux-images/upload/postmarketOS/Videos/
PostmarketOS boots from Micro SD Card! https://github.com/antonialoytorren...ard-read-above-steps-for-pmbootstrap-guidance
MAINLINE 5.17.1 KERNEL AVAILABLE (ONLY WORKS ON 7-INCH SAMSUNG GALAXY TAB 2 DEVICES)
What works:
Booting
Display
Modern browsers (well, kinda)
WiFi
GPU (non-free SGX drivers)
Bluetooth (only fbkeyboard image, in Phosh and Sway does not work)
Rotation
Not tested or does not work:
Everything else
DOWNSTREAM 3.1 KERNEL (WORKS ON ALL SAMSUNG GALAXY TAB 2 DEVICES)
What works:
Booting
Display
Modern browsers (only midori)
What partially works:
WiFi (using nmcli on the terminal, somehow nm-applet password prompting does not work)
Not tested or does not work:
Bluetooth
Rotation
Other modern browsers
Everything else
TODO:
See https://wiki.postmarketos.org/wiki/Samsung_Galaxy_Tab_2_10.1_(3G_and_Wifi)_(samsung-espresso10) for unified.
See https://wiki.postmarketos.org/wiki/Samsung_Galaxy_Tab_2_7.0"_(samsung-espresso3g) for espresso3g/espressowifi 7" inch only.
10 inch uses a different display panel. Work is being done to unify all the Samsung Galaxy Tab 2 7.0 and 10.1 devices into the mainline kernel, but we need testers.
XDA:DevDB Information
Linux on Samsung Galaxy Tab 2, Tool/Utility for the Samsung Galaxy Tab 2
Contributors
VIEW HERE: https://wiki.postmarketos.org/wiki/Samsung_Galaxy_Tab_2_10.1_(3G_and_Wifi)_(samsung-espresso10)
Images made by me.
Source Code: https://sourceforge.net/projects/sgalaxy-tab2-linux-images/
Version Information
v2.0
- Changed icons (https://github.com/vinceliuice/vimix-icon-theme) and GTK (https://github.com/vinceliuice/vimix-gtk-themes) of XFCE. Now it is a modern XFCE.
- Removed second panel to save space.
- Shrink window borders in Window Manager to save space.
- Onboard now shows only when typing text in an input.
- Changed battery plugin to battery monitor.
- The XFCE Whiskermenu does not close when typing in onboard.
· Known issues (will fix in the next release):
- NetworkManager applet does not prompt a password. Have to type network connection via the command line.
- Action buttons (Login, Shutdown, Reboot, etc.) do not work. Have to reboot or shutdown via the command line.
· Other things that will be included in the next release:
- Make a desktop shortcut opening a browser linking this XDA thread.
v1.0
- Initial Release
Status: Testing
Created 2020-10-02
Last Updated 2022-09-20
Screenshots
XFCE
v2.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
v1.0
Boot from sdcard
There is a way to run PostmarketOS on a Micro SD Card (an easy but a little bit dirty way):
What you have to do:
Download my XFCE 2.0 img file HERE and burn the img to the Micro SD Card (using an image USB writer program). You can also instead write your own image to the Micro SD Card using pmbootstrap: pmbootstrap install --sdcard=/path/to/sdcard
Download the FAKE pmOS zip HERE. It's a sample zip file to avoid errors of the initial script installer. Then, push it to the tablet using `adb push` and then flash it.
Your device must have TWRP recovery installed. So, go to TWRP recovery now.
WIPE /system partition (where sample postmarketOS is installed).
Insert your Micro SD Card to your tablet.
Reboot and enjoy!
Reserved
Reserved
Reserved
Reserved2
Excited to try it!!!
All the best for the success of this os!!!
Mithil17 said:
Excited to try it!!!
All the best for the success of this os!!!
Click to expand...
Click to collapse
It's a bit laggy now, but with some improvements, it could be run with no problem.
thats cool
the ui feel a bit outdated but good work!
zer0_Clover said:
the ui feel a bit outdated but good work!
Click to expand...
Click to collapse
XFCE is one of the Desktop Environments that you can choose on PostmarketOS installation. In this device, it is the most stable for me.
Edit: Like you said, maybe if I have time, could install a theme for XFCE to modernify it.
aat596 said:
It's a bit laggy now, but with some improvements, it could be run with no problem.
Click to expand...
Click to collapse
Havent tried it out yet(dunno if i can revert back to android and battery issues but will try)
Mithil17 said:
Havent tried it out yet(dunno if i can revert back to android and battery issues but will try)
Click to expand...
Click to collapse
You can always revert to Android at anytime with TWRP. I'll post later how to do it.
aat596 said:
You can always revert to Android at anytime with TWRP. I'll post later how to do it.
Click to expand...
Click to collapse
Anyway except for Linux OS on the PC (i mean i can use a VM) but most people have windows on their computers so they wont install Linux to just install something on their tablet
---------- Post added at 10:43 AM ---------- Previous post was at 10:11 AM ----------
well just read ur installation guide and it can be done on Windows using adb (usb charger needed)
idk if i can just paste it into my tab and flash it
Will keep u updated once i install it
aat596 said:
XFCE is one of the Desktop Environments that you can choose on PostmarketOS installation. In this device, it is the most stable for me.
Edit: Like you said, maybe if I have time, could install a theme for XFCE to modernify it.
Click to expand...
Click to collapse
\
can it have android support like sailfish?
UPDATE: i copied it to my tab to /sdcard and tried installing, it shows failed to mount system(device or resource busy)
i cannot sideload using adb as my pc dosent detect it
now im going to use adb on my tab and try to sideload
---------- Post added at 12:51 PM ---------- Previous post was at 12:47 PM ----------
zer0_Clover said:
\
can it have android support like sailfish?
Click to expand...
Click to collapse
https://wiki.postmarketos.org/wiki/FAQ#Will_Android_apps_be_supported.3F
---------- Post added at 12:56 PM ---------- Previous post was at 12:51 PM ----------
Ok so i just restarted even though it showed me error failed to mount system(device or resource busy)
AND IT WORKED
bugs (i will edit this as i find out)-
-brightness slider dosent work
-ui in some places is blurry
-booting into twrp causes the os to be removed(i needed to reflash it)
-cant click on my wifi and put the password
-if u logout there is no keyboard to log in again
overall this can be improved greatly
thanks for making it!!
aat596 said:
Note: PostmarketOS is in development. It cannot be used as a daily driver in this device (yet).
See README of installation HERE
What works:
Booting
Display
Modern browsers (only midori)
What partially works:
WiFi (using nmcli on the terminal, somehow nm-applet password prompting does not work)
Not tested or does not work:
Bluetooth
Rotation
Other modern browsers
Everything else
TODO:
See https://wiki.postmarketos.org/wiki/Samsung_Galaxy_Tab_2_10.1_(3G_and_Wifi)_(samsung-espresso10)
XDA:DevDB Information
Linux on Samsung Galaxy Tab 2, Tool/Utility for the Samsung Galaxy Tab 2
Contributors
VIEW HERE: https://wiki.postmarketos.org/wiki/Samsung_Galaxy_Tab_2_10.1_(3G_and_Wifi)_(samsung-espresso10)
Images made by me.
Source Code: https://sourceforge.net/projects/sgalaxy-tab2-linux-images/
Version Information
Status: Testing
Created 2020-10-02
Last Updated 2020-10-02
Click to expand...
Click to collapse
Are you gonna continue developing this or is this the end??
zer0_Clover said:
\
can it have android support like sailfish?
Click to expand...
Click to collapse
They have anbox packaged, but i think won't work. Mind that it's using a 3.x.x kernel (and at the moment of writing, kernel.org will hit 5.10 soon)
Mithil17 said:
UPDATE: i copied it to my tab to /sdcard and tried installing, it shows failed to mount system(device or resource busy)
i cannot sideload using adb as my pc dosent detect it
now im going to use adb on my tab and try to sideload
---------- Post added at 12:51 PM ---------- Previous post was at 12:47 PM ----------
https://wiki.postmarketos.org/wiki/FAQ#Will_Android_apps_be_supported.3F
---------- Post added at 12:56 PM ---------- Previous post was at 12:51 PM ----------
Ok so i just restarted even though it showed me error failed to mount system(device or resource busy)
AND IT WORKED
bugs (i will edit this as i find out)-
-brightness slider dosent work
-ui in some places is blurry
-booting into twrp causes the os to be removed(i needed to reflash it)
-cant click on my wifi and put the password
-if u logout there is no keyboard to log in again
overall this can be improved greatly
thanks for making it!!
Click to expand...
Click to collapse
Nice! All work it's not made by me, the contributors are here: https://wiki.postmarketos.org/wiki/Samsung_Galaxy_Tab_2_10.1_(3G_and_Wifi)_(samsung-espresso10)
Mithil17 said:
Are you gonna continue developing this or is this the end??
Click to expand...
Click to collapse
I'm trying to fix at least the WiFi issue, because you can only connect with nmcli.
The hard work now is to port the kernel into mainline sources on kernel.org (that can be really long), so then I don't have to carry an entire fork for just this device.
Because the OMAP chip is supported, maybe it can be a little bit easier.
https://wiki.postmarketos.org/wiki/Texas_Instruments_OMAP_4_(OMAP44xx)
https://wiki.postmarketos.org/wiki/Mainlining
I only distribute the XFCE image, but I'm also trying to fix some TODO issues (most important ones, it's not worth to spend a lot of time on an outdated 3.x.x kernel) and making a prettier desktop environment.
So... of course is not the end. In fact, there's so much work to do
aat596 said:
I'm trying to fix at least the WiFi issue, because you can only connect with nmcli.
The hard work now is to port the kernel into mainline sources on kernel.org (that can be really long), so then I don't have to carry an entire fork for just this device.
Because the OMAP chip is supported, maybe it can be a little bit easier.
https://wiki.postmarketos.org/wiki/Texas_Instruments_OMAP_4_(OMAP44xx)
https://wiki.postmarketos.org/wiki/Mainlining
I only distribute the XFCE image, but I'm also trying to fix some TODO issues (most important ones, it's not worth to spend a lot of time on an outdated 3.x.x kernel) and making a prettier desktop environment.
So... of course is not the end. In fact, there's so much work to do
Click to expand...
Click to collapse
Wow still working on an 8 year old device I'm amazed!! Thanks a lot
Also im using it on espresso3g (if that helps u fix bugs)
I am more than happy to test this (cant tell battery info my battery is old and dosent work properly) but other features and issues i will try and tell you!
I would also love to help develop it but I have no clue on how the code for a custom OS works and i guess it requires Linux and a beefy computer
All the best and thanks!
New version 2.0
A new version of my image is available to download. The procedure is the same as the previous one. Flash and enjoy
Please download it here: https://sourceforge.net/projects/sgalaxy-tab2-linux-images/files/postmarketOS/XFCE/pmos-samsung-xfce-espresso10-v2.0.zip
Login info:
User: samsung
Password: samsung
What includes in this release (v2.0):
- Changed icons (https://github.com/vinceliuice/vimix-icon-theme) and GTK (https://github.com/vinceliuice/vimix-gtk-themes) of XFCE. Now it is a modern XFCE.
- Removed second panel to save space.
- Shrink window borders in Window Manager to save space.
- Onboard now shows only when typing text in an input.
- Changed battery plugin to battery monitor.
- The XFCE Whiskermenu does not close when typing in onboard.
Known issues (will be fixed in the next release):
- NetworkManager applet does not prompt a password. Have to type network connection via the command line.
- Action buttons (Login, Shutdown, Reboot, etc.) do not work. Have to reboot or shutdown via the command line.
Other things that will be included in the next release:
- Make a desktop shortcut opening a browser linking this XDA thread.
A little spoiler: