Hello guys,
I installed the ROM under this post http://forum.xda-developers.com/showthread.php?t=2288531&page=13
The flashing of the ROM was successful but the only thing that it's not working with this flash is that I'm unable to turn on my wifi feature.
Is there a way to fix this without remodifying the ROM?
Any help will do. Thanks guys!!
tones160 said:
Hello guys,
I installed the ROM under this post http://forum.xda-developers.com/showthread.php?t=2288531&page=13
The flashing of the ROM was successful but the only thing that it's not working with this flash is that I'm unable to turn on my wifi feature.
Is there a way to fix this without remodifying the ROM?
Any help will do. Thanks guys!!
Click to expand...
Click to collapse
First just an FYI questions go in the QA section. This will be moved there by a Mod so just giving you a heads up. Were you on MDC or MDL before you flashed the rom?
crawrj said:
First just an FYI questions go in the QA section. This will be moved there by a Mod so just giving you a heads up. Were you on MDC or MDL before you flashed the rom?
Click to expand...
Click to collapse
My S4 was running on MDL already.
tones160 said:
My S4 was running on MDL already.
Click to expand...
Click to collapse
That's what I was thinking. That Rom is MDC based. So you have MDL Firmware but MDC System. If you want to stick with that rom here is what I would do. Make a backup. Odin the stock MDC tar twice, don't ask just better this way . Install custom recovery back on. Restore only the system. You should be fixed. Or you could probably get away with just installing the MDC Kernel. You can find the tar and kernel from here http://forum.xda-developers.com/showthread.php?t=2256514
Flash a custom kernel and your Wifi will work.
Sent from my SPH-L720 using Tapatalk 2
crawrj said:
That's what I was thinking. That Rom is MDC based. So you have MDL Firmware but MDC System. If you want to stick with that rom here is what I would do. Make a backup. Odin the stock MDC tar twice, don't ask just better this way . Install custom recovery back on. Restore only the system. You should be fixed. Or you could probably get away with just installing the MDC Kernel. You can find the tar and kernel from here http://forum.xda-developers.com/showthread.php?t=2256514
Click to expand...
Click to collapse
That's a great suggestion there crawjr. I will try the kernal suggestion first if anything. Even though i feel uncomfortable messing with the kernel system. Sorry for the noob questions I haven't been on this page for ages since the G2 was first released lol. :good:
Related
I currently have a brand new Canadian S4 with the MDJ firmware/baseband version.
Most of the roms are MDL based.
Do i have to change the base firmware/baseband to MDL before flashing and MDL rom ?
My goad is to install CleanRom wich is MDL based.
Thanks for the guidance.
Xetalx
Xetalx said:
I currently have a brand new Canadian S4 with the MDJ firmware/baseband version.
Most of the roms are MDL based.
Do i have to change the base firmware/baseband to MDL before flashing and MDL rom ?
My goad is to install CleanRom wich is MDL based.
Thanks for the guidance.
Xetalx
Click to expand...
Click to collapse
You can just flash the ROM. Just make a Nandroid backup first. Some ROM's come with a custom kernel and you may need to flash a Canadian kernel directly after flashing the ROM.
blyndfyre said:
You can just flash the ROM. Just make a Nandroid backup first. Some ROM's come with a custom kernel and you may need to flash a Canadian kernel directly after flashing the ROM.
Click to expand...
Click to collapse
I did get the original Kernel file for my cell provider. It is a TAR file with boot.img into it.
What is the easyest way to apply it after flashing the Rom in TWRP ?
Thanks
Xetalx
TARs are flashed with Odin or Mobile Odin.
Xetalx said:
I did get the original Kernel file for my cell provider. It is a TAR file with boot.img into it.
What is the easyest way to apply it after flashing the Rom in TWRP ?
Thanks
Xetalx
Click to expand...
Click to collapse
If you are flashing the STOCK firmware for your specific carrier it will include the STOCK kernel.
If you are using a custom ROM like Mint Jelly or something, I'd say flash Adam kernel after flashing the ROM. You won't want to flash a STOCK kernel with a custom ROM.
Did you end up updating to MDL?
I also have the MDJ kernel and I installed CleanRom, I now cannot get wifi and TWRP will not boot in recovery mode. I thought it would be easier just to update to MDL to get wifi but mobile Odin did not work.
Thank you
travisobvs said:
Did you end up updating to MDL?
I also have the MDJ kernel and I installed CleanRom, I now cannot get wifi and TWRP will not boot in recovery mode. I thought it would be easier just to update to MDL to get wifi but mobile Odin did not work.
Thank you
Click to expand...
Click to collapse
Regarding wifi on CleanROM, did you check post #2 here?
bo8 said:
Regarding wifi on CleanROM, did you check post #2 here?
Click to expand...
Click to collapse
No I did not,
Truthfully I am a pretty big Noob to all of this and was afraid of changing my kernel to MF3 from MDJ. I really didn't know how that would affect my phone / carrier situation here in Canada. The main problem was that I could not get the phone into recovery mode. Turns out I just needed to re-root the phone. So when I got the phone to actually go into recovery I jumped at the CM Rom. When I find a forum that helps me understand what updating my Kernel does to my phone I will try to update Kernel and go back to CleanRom. I kind of miss multiwindow.... maybe a little bit of Touchwiz...
Thanks for the reply!
EDIT : I also found this : http://www.scottsroms.com/downloads.php?do=file&id=421 which is a version of CleanROM made for the MDJ but it is dated further back which threw me for a loop too.
travisobvs said:
No I did not,
Truthfully I am a pretty big Noob to all of this and was afraid of changing my kernel to MF3 from MDJ. I really didn't know how that would affect my phone / carrier situation here in Canada. The main problem was that I could not get the phone into recovery mode. Turns out I just needed to re-root the phone. So when I got the phone to actually go into recovery I jumped at the CM Rom. When I find a forum that helps me understand what updating my Kernel does to my phone I will try to update Kernel and go back to CleanRom. I kind of miss multiwindow.... maybe a little bit of Touchwiz...
Thanks for the reply!
EDIT : I also found this : http://www.scottsroms.com/downloads.php?do=file&id=421 which is a version of CleanROM made for the MDJ but it is dated further back which threw me for a loop too.
Click to expand...
Click to collapse
No worries and you're very welcome! Don't sweat, I'm still on stock ROM because I'm hesitant to make the ROM dive. Don't know how or if installing MF3 kernel via custom ROM would affect the phone in terms of rooting or custom recovery either. I'd probably be sticking with MDJ build if possible.
You and me both on multiwindow! Helps a ton when it comes to referencing something while emailing/texting! I'd miss the TW camera as well ... maybe. haha
Which version of TWRP are you on? Version 2.6 has an often-experienced issue where it just hangs at the "teamwin" splash screen. Downgrading to 2.5.0.2 resolves that.
Any updates?
bo8 said:
No worries and you're very welcome! Don't sweat, I'm still on stock ROM because I'm hesitant to make the ROM dive. Don't know how or if installing MF3 kernel via custom ROM would affect the phone in terms of rooting or custom recovery either. I'd probably be sticking with MDJ build if possible.
You and me both on multiwindow! Helps a ton when it comes to referencing something while emailing/texting! I'd miss the TW camera as well ... maybe. haha
Which version of TWRP are you on? Version 2.6 has an often-experienced issue where it just hangs at the "teamwin" splash screen. Downgrading to 2.5.0.2 resolves that.
Click to expand...
Click to collapse
Hey guys,
I am also a 1337m Rogers S4 (MDJ) owner, also a noob as well. I managed to flash my phone with CM and had a pretty good AOSP experience and learned a little bit on the way. I can legitimately say that I miss a couple thing about stock / Touch wiz, mainly the multiwindow support and camera. Cyanogenmod is also acting up and drains battery pretty bad when I am roaming in the states.
What did you guys end up doing? Did you update your base-band to mdk and install CleanRom? Right now that looks like it's my goal but I truthfully have no idea how to do it.
Did you guys go back to stock after changing? Do I just find a stock ROM on the forum and use ODIN to bring it back?
Is switching roms as easy as choosing something in Goo manager or do you need to go into a recovery in recovery mode?
Thank you!
Sorry about these questions all Im sure they are newb but I just want to make sure before I go about doing anything....
1. I am rooted on MF9 and thinking about going to the google Rom is there a 4.3 out for the Sprint version or it just 4.2.2 just need a no or if yes a little link to help me out due too I have not seen one.
2. If I go to google rom and decide I want to go back to MF9 how do I go about doing this in odin do I use official MF9 software? or what?
The GE rom posted here
http://forum.xda-developers.com/showthread.php?t=2345386
is off of the 4.2.2 GE S4.
If you're looking for a rom based off of 4.3, give the Cyanogen Rom 10.2 nightly a shot, located here. http://get.cm/?device=jfltespr
The thread describing bugs, and all that fun stuff is here. http://forum.xda-developers.com/showthread.php?t=2405081
To go back to stock, you can either flash the stock M9F rom through custom recovery, or odin everything back to stock using this thread here http://forum.xda-developers.com/showthread.php?t=2357471
ok thanks for clarification saw it just wanted to make sure and what what files would be good to Odin back to stock just MF9 stock file?
jprocket45 said:
ok thanks for clarification saw it just wanted to make sure and what what files would be good to Odin back to stock just MF9 stock file?
Click to expand...
Click to collapse
For stock, you can use this link
You guys have so much more patience than I do. Lol
Sent from my Sprint Galaxy S4 running the Blu Kuban
jprocket45 said:
ok thanks for clarification saw it just wanted to make sure and what what files would be good to Odin back to stock just MF9 stock file?
Click to expand...
Click to collapse
Use either the post above for pure stock or this
Download Deodexed No Data Wipe Tar from http://forum.xda-developers.com/showthread.php?t=2357471
For stock + root + busybox
Assuming you have a custom recovery installed just make a backup in recovery before flashing the new ROM. Then you can revert to your old rim anytime you like.
ok cool thanks everyone for your help new to the S4 things so trying to catch up yea Im running MF9 Rooted at the moment with CWM about to see what this google rom and just trying to make sure I don't brick my phone taking it calm and easy for a bit will get more gutsy soon enough lol
Hi everyone. I'm picking up an at&t i337 that's running the stock JB 4.2.2 UCUAMDL firmware, and has not been yet upgraded to 4.3. I intend to flash a custom recovery, ROM, kernel and I want to flash the MJ6 modem. Here's my question; if I flash a 4.4.2 AOSP ROM, can I safely flash the MJ6 modem that comes from 4.3? I'm running the MJ6 modem on my other S4 thats on the MK6 firmware with safestrap, and it's giving me great reception, downloads, etc.
Thanks,
Mike
Yes. If you root your amdl phone and put a custom recovery on it you can flash what ever you want through it.
I used motochopper method back when I did it. It puts root and twrp on for you
SelfElevated2 said:
Yes. If you root your amdl phone and put a custom recovery on it you can flash what ever you want through it.
I used motochopper method back when I did it. It puts root and twrp on for you
Click to expand...
Click to collapse
^THIS^
and most like 2.5.0.2 if you want to try it. not sure what moto is using now
also, read read read and nandroid asap--:good:
SelfElevated2 said:
Yes. If you root your amdl phone and put a custom recovery on it you can flash what ever you want through it.
I used motochopper method back when I did it. It puts root and twrp on for you
Click to expand...
Click to collapse
rugmankc said:
^THIS^
and most like 2.5.0.2 if you want to try it. not sure what moto is using now
also, read read read and nandroid asap--:good:
Click to expand...
Click to collapse
Thanks, both of you. I appreciate you getting back to me. It was TOUGH finding an S4 that hadn't been updated yet, so I want to make sure I don't screw it up.
Thanks again!
Mike
mmcneil said:
Thanks, both of you. I appreciate you getting back to me. It was TOUGH finding an S4 that hadn't been updated yet, so I want to make sure I don't screw it up.
Thanks again!
Mike
Click to expand...
Click to collapse
NP--:good:
Ok, I have been running an OLD version of SACs custom ROM for a while (Pre Kitkat I think).
I am considering going back to stock Rooted with the Hotspot mod only.
I've been out of the "flashing" scene for a while, so what's the easiest way to go back to current stock w/ rooted & hotspot mod? If you could point me in the right direction, I would appreciate it!
1. Please don't post questions in the development forum.
2. Find Unknownforce's stock rooted NAE thread.
3. Read and follow his directions.
frostedunit said:
1. Please don't post questions in the development forum.
2. Find Unknownforce's stock rooted NAE thread.
3. Read and follow his directions.
Click to expand...
Click to collapse
Ahh... Sorry. I was looking at this forum and the Q&A forum at the same time. Thought I was posting in there.
Thanks, I'll look up his.
Been reading different threads. So if I just flash i Rooted NAE ROM I should be ok? I just want to make sure since I am coming from an OLD version of SACS.
AzWizzard said:
Been reading different threads. So if I just flash i Rooted NAE ROM I should be ok? I just want to make sure since I am coming from an OLD version of SACS.
Click to expand...
Click to collapse
You'll probably have to Odin the NAE modem as well. Somewhere in unknown's thread are the instructions to do and keep a pre Knox bootloader
Ok, 1 more question...
If I want to go back to complete stock from the old SACS Rom...
Could I just flash a stock MDL to my phone and then tell the phone to update it's self and let it OTA update to current version?
Would there possible be any problems with that?
Just curious as I have an old stock MDL already on my computer from when I was flash long ago.
I know this way I would have KNOX but I honestly don't really care too much.
That will take a bit, but will work for sure.
AzWizzard said:
Ok, 1 more question...
If I want to go back to complete stock from the old SACS Rom...
Could I just flash a stock MDL to my phone and then tell the phone to update it's self and let it OTA update to current version?
Would there possible be any problems with that?
Just curious as I have an old stock MDL already on my computer from when I was flash long ago.
I know this way I would have KNOX but I honestly don't really care too much.
Click to expand...
Click to collapse
You should not do this! If you have a newer bootloader than the MDL install will fail. All you need to do is download the full NAE tar file and install it. You will be updated in one step and you won't lose data. you can get the full NAE tar from here: http://forum.xda-developers.com/showthread.php?t=2663619
Hey guys, sorry if this is a duplicate post but I'm trying to return to stock Verizon through restoring a backup and my phone gets stuck at the Verizon splash screen. I'm thinking it's because of the kernel
I rooted>safestraped>installed jasmine 2.4>flashed NC2 kernel via odin.
Jasmine runs fine, and honestly I like it a lot but I want to get better battery life so I need to revert to stock.
Correct me if I'm wrong but isn't the kernel causing the issue where stock won't boot up fully?
And if I am, can you point me in the direction of an NC4 odin flashable kernel?
Thanks in advance
rdar_93 said:
Hey guys, sorry if this is a duplicate post but I'm trying to return to stock Verizon through restoring a backup and my phone gets stuck at the Verizon splash screen. I'm thinking it's because of the kernel
I rooted>safestraped>installed jasmine 2.4>flashed NC2 kernel via odin.
Jasmine runs fine, and honestly I like it a lot but I want to get better battery life so I need to revert to stock.
Correct me if I'm wrong but isn't the kernel causing the issue where stock won't boot up fully?
And if I am, can you point me in the direction of an NC4 odin flashable kernel?
Thanks in advance
Click to expand...
Click to collapse
You can always flash the NC4 stock tar via Odin. http://forum.xda-developers.com/showthread.php?t=2524572
heath2805 said:
You can always flash the your stock tar via Odin. http://forum.xda-developers.com/showthread.php?t=2524572
Click to expand...
Click to collapse
Well I want to revert to stock but I want to go back to the backup I made.
Is there no way I can just flash the NC4 kernel to go back?
rdar_93 said:
Well I want to revert to stock but I want to go back to the backup I made.
Is there no way I can just flash the NC4 kernel to go back?
Click to expand...
Click to collapse
Good question. I'm a little new to the note 3 ...lol I switch phones a lot. I've had the same issue as you with restoring stock backup. It probably is kernel related due to having NC2 flashed to run custom builds. Maybe some else can chime in.