Hi,
Im Marcos from Lima-Peru
I have a Optimus L5 E615F Dual SIM, i tried intall Jelly Beam but with another firmware (E610), the phone dont response the touch screen, sometimes i had to press vol + and vol - to reactivate the screen, so i dicided back to Ice Cream.
I used de KDZ software to make this process, and first install v10d_downgrade.kdz, the process finished normally, then install their original firmware (v10B Panama) and the process finished very good. But the phone stuck in LG logo (bootloop) to solve this problem i installed the adb terminal and connect my phone in logo screen bootloop and typed adb boot recovey. Finally the android come to life.
Here is the Big Problem :silly:
Now the touch screen deactivates every 3 seconds ( i touch the screen and no response nothing ) to repair i had to press vol down and quickly touch the screen and touch again works. When i stay in camera or qwerty keyboard the screen dont disable, is very strange.
maybe do the wipe clean or modifiying some .conf via terminal adb...
Please... sorry for my poor english ... thanks ...
help me masters of xda
Related
Hi all,,,
I installed LG G2 kitkat 4.4.2 unofficial , with TWRP,,
now after the new software the TWRP is not working ,
for example when open it then click REBOOT ,,, then Recovery
the device restart the stay in black screen for long time with no response ,,,
to restart it again i just push the power button until it run again,
how can i fix this problem to make a restore for my device to JellyBean.
my model : LG-D802
Thanks
hello xda community
i've installed g3 cloudyflex on my g2.. and after wiping cache the device was basically soft bricked (lg logo loop)
now i've tried to get to back original kitkat rom.. everything went fine but then the device got errors "Unfortunately com.android.phone has stopped" and some other gui errors.. the screen is black but you use power/vol buttons for reboot etc
i couldnt get in my device so i tought of a hard reset...
but the psyhical button one doesnt seem to be working for me.. what to do??... not possible to get into rec. mode from pc?
after some time it manages to get to usb screen but it crashes completely and the device shuts down
also i cant get into safe mode as it keeps rebooting until i release power button
---
tldr: How can i fix my g2 if software and back button recovery method isnt working?
please I have not rooted LG G2 D802
stuck at the LG logo, :crying:
initially because I factory reset but the screen freeze when a factory reset,
I TURN OFF push the power button 10 seconds,
and then I turn it on again
now I am stuck at the LG logo,
but I could hear when I touch the screen,
Also I could hear the sound of the touch dialpad like normal condition,
I could hear when I make emergency calls,,
I do it all the time just to show the LG logo at screen, sometimes show blackscreen,,, what is the problem???
now I can't enter recovery mode.
and I can't enter download mode,, all the same only shows the LG logo
whether a software problem ?? (eg display driver) if possible????
or hardware ??
I really hurt now :crying:
sorry for my english
THANKS
Phone Model: AT&T LG G2 (D800)
Recovery: Custom TWRP Recovery
ROM: CM12 Official ROM
My phone was working fine from last 3-4 months, until today it restarted and got stuck on 'LG' logo, I left it for some time and it shows the demigod green screen of death with option to access download mode and restart.
What I already did!
1) Full hard reset, I can access the TWRP.
2) Flashed the ROM again.
Current Situation!
Stuck on LG logo from last 10mins.
Thanks in advance.
Edit #1: Reflashed the same ROM (CM12) and it booted into the language selection page, freezes and restarted. Stuck on black screen, I turned it off by pressing the power button for 10-15 secs. I kept it in a freezer for 10-15secs and turned it on, same happened.
Edit #2 I flashed a stock based ROM through TWRP, it was going fine but it froze in between, I waited for some time and it went black. I waited for 1 hr and it was still black so I hold the power button and restarted the phone.
Now its showing "Secure Boot Error" which remains for some secs and a black screen comes, I can't open TWRP, Download mode is accessible but after 2 secs into download mode, secure boot error comes. Whenever I try to connect it to Windows PC(I installed all the required drivers and all) it starting popping up drives(with option to format) which never stops until I remove the USB cable.
Hi!
In this thread someone posted a solution.
jazibzps said:
Steps to perform.
1. While in critical error screen you have an option to press volume up button to boot into download mode( although it will not boot to download mode) but still press volume up button so your Pc can detect your phone.
2. Now flash a kdz file of your lg g2 with flash tool. ( you can google for it to download flash file for your lg g2 and how to flash it with lg flass tool.)
3. When you will try to flash it will fail..
4. Now power off your phone by pressing power button.
5. Now boot to download mode and flash the correct kdz with lg flash tool and u r good to go..
To acess download mode power off your phone immediately press volume up button and while keep pressing it and plug in usb cable and you will be in download mode
I performed all this on lg g2 d801 but i hope u can try it on other varients as well. As i was scared of short circut method and srk tool didn't help..
Click to expand...
Click to collapse
For informations about LGs flashtool etc. please check out the G2-Index-Thread.
Jan Philipp said:
Hi!
In this thread someone posted a solution.
For informations about LGs flashtool etc. please check out the G2-Index-Thread.
Click to expand...
Click to collapse
Thanks for replying.
My case is a bit different now, I reflashed the same ROM(CM12) and it successfully booted, worked for 10 secs and it was frozen, restarted automatically, stuck on LG Logo.
I notice that there's some heat issue, I kept it in freezer for 10 secs, rebooted it, it booted till language selection page and freeze after 10-15secs.
Also the link is for DemiGod Critical Crash, mine is DemiGod Kernel Crash.
Updated!!
First post updated, please check the current situation before posting anything.
I don't have a computer or laptop to connect it to so how can I fix it?
Hi Guys,
I got my G2 back from my brother who have not using it for a while.
1st day it was working. I plan to install Lineage or custom ROM today...thats when the issue start:
1: it wont go to recovery mode. Even thou I have rooted and install latest TWRP it will only boot to Hardware control key screen, only this screen and wont boot to the OS it will be stuck on LG logo forever....
2: tried to go to Download mode....the same It will go to the same hardware control key only....
3: when I plug in to my PC it wont turn off, keep on restarting after I press the power button for a while.... only if no cable connected I can totally turn it off...
For a noob like me....looks like my G2 D802 is brick :crying: ...any suggestion?
PS: windows detect it( As below picture ), off at all when I plug in AC.....It Will just show the LG logo and the LED just flashing non stop until I pull out the cable and turn it off...
This is what shown on the laptop No Disk1/2/3/4/5 of sort showing on the Device Manager and on the phone each time I try to go recovery or download mode belowh happen:
https://flic.kr/p/QH2HzE
https://flic.kr/p/2bs67ne
Update 1: I found out why the phone was brick. Seems like my Brother ask his friend to install Lineage 15.1 on the it. After everything is verified ok. He wipe and try to flash the rom in TWRP but.....it failed and suddenly just freeze and turn off the screen. Maybe bad ROM download or some step miss....so now the Phone has NO OS and would not boot to anything only the Hardware Key Management....that's all....help? Need the phone as 2nd phone for company lines....dont wanna take the iPhone 6 from my boss....
help?