Database Users

Galaxy Tab 7.7 P6800 Need stock Recovery

I was trying to reset the whole device because I've uninstalled some stock apps by accident using Titanium backup. So I tried to recover my device through the recovery mode and start fresh. The stock apps was still gone...
So I figure I can use Odin3 v1.87 to flash the whole device with the firmware from http://www.sammobile.com/firmware/
I thought that would most likely get me back to the factory settings with everything and start fresh. But then Odin needs PDA, PHONE, CSC to run and the firmware only gave me one P6800OZSLP7_P6800ZSLP7_HOME.tar.md5 I was like how can I use this...
Then I found a guide in XDA how to separate it out into the three sections.
http://forum.xda-developers.com/show...64&postcount=9
I was like finally i can start this fresh. Things got worse.... every time it flashes to modem.bin it got stuck. It can never go through that part of the flashing. I then want to give up and use CWM to recover it back. Now i dont have 3g anymore on my tablet. Can someone teach me how to reset the whole thing back to stock?
As you can tell from the firmware i used is an HK Galaxy Tab 7.7 in ICS.
Thank you so much!

stick the tar.md5 file in pda and flash with odin it will flash everything to the correct places. DO NO TICK DO NOT TICK RE-PARTITION
Sent from my GT-P6800 using xda premium

I tried it and this is what i get:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6800OZSLP7_P6800ZSLP7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> factoryfs.img
<ID:0/006> hidden.img
<ID:0/006> param.lfs
<ID:0/006> recovery.img
<ID:0/006> Sbl.bin
<ID:0/006> zImage
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So I guess it couldnt write to it?

Do you have a P6810 or a P6800 ?
Sent from my GT-P6800 using xda premium

kishd said:
Do you have a P6810 or a P6800 ?
Sent from my GT-P6800 using xda premium
Click to expand...
Click to collapse
I have p6800 currently my problem is that when i tried to use cwm to restore it, it is restored but it can detect the 3g portion and not recognize my sim card.

naihochow said:
I have p6800 currently my problem is that when i tried to use cwm to restore it, it is restored but it can detect the 3g portion and not recognize my sim card.
Click to expand...
Click to collapse
I realized what happened i must have click repartition earlier now my device only has like 44mb hence the reason why it wouldnt finish flashing b/c it ran out of space. Do any of you know how to repartition the device back to the correct size?

Actually i got it fix all i needed to do is to wipe the cache and maybe flashing it with the right pit i'm not sure but everything is working now thanks everyone

Samsung Galaxy Tab 7.7 recovery code
I desperately need the stock recovery code of Samsung Galaxy Tab 7.7 because got stuck in a screen with notice: ",.Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." But Kies is asking me for a recovery code. What is the recovery code please?
naihochow said:
I was trying to reset the whole device because I've uninstalled some stock apps by accident using Titanium backup. So I tried to recover my device through the recovery mode and start fresh. The stock apps was still gone...
So I figure I can use Odin3 v1.87 to flash the whole device with the firmware from http://www.sammobile.com/firmware/
I thought that would most likely get me back to the factory settings with everything and start fresh. But then Odin needs PDA, PHONE, CSC to run and the firmware only gave me one P6800OZSLP7_P6800ZSLP7_HOME.tar.md5 I was like how can I use this...
Then I found a guide in XDA how to separate it out into the three sections.
http://forum.xda-developers.com/show...64&postcount=9
I was like finally i can start this fresh. Things got worse.... every time it flashes to modem.bin it got stuck. It can never go through that part of the flashing. I then want to give up and use CWM to recover it back. Now i dont have 3g anymore on my tablet. Can someone teach me how to reset the whole thing back to stock?
As you can tell from the firmware i used is an HK Galaxy Tab 7.7 in ICS.
Thank you so much!
Click to expand...
Click to collapse

diomedecassar said:
I desperately need the stock recovery code of Samsung Galaxy Tab 7.7 because got stuck in a screen with notice: ",.Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." But Kies is asking me for a recovery code. What is the recovery code please?
Click to expand...
Click to collapse
please download the stock firmware and flash it using pc odin in download mode

diomedecassar said:
I desperately need the stock recovery code of Samsung Galaxy Tab 7.7 because got stuck in a screen with notice: ",.Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." But Kies is asking me for a recovery code. What is the recovery code please?
Click to expand...
Click to collapse
I tried contacting Samsung to see if I could get the recovery code but they never gave it to me. What happened? did you try to flash a different rom and got stuck?

naihochow said:
Actually i got it fix all i needed to do is to wipe the cache and maybe flashing it with the right pit i'm not sure but everything is working now thanks everyone
Click to expand...
Click to collapse
Hi Bro I got the same problem too, if you don't mind can you explain me how to fix it in detail,
thanks.

Could someone please give a link or information on how to downgrade from ICS to HC?
I've tried just putting original firmware to odin, but then my device gets stuck at samsung sign when booting.
Thanks for help.
P.S. i've flashed my device with odin from HC to ICS a month ago.

kaimyns said:
I've tried just putting original firmware to odin, but then my device gets stuck at samsung sign when booting.
Click to expand...
Click to collapse
After flashing HC via Odin or before?
If after, when stuck at Samsung Logo....but to recovery using 3 button combo, wipe cache and data.
Reboot

It's after and thanks for help!
Astrix Ashburn said:
After flashing HC via Odin or before?
If after, when stuck at Samsung Logo....but to recovery using 3 button combo, wipe cache and data.
Reboot
Click to expand...
Click to collapse

kaimyns said:
It's after and thanks for help!
Click to expand...
Click to collapse
You manage to get back to HC Homescreen by now?

Yes, samsung loaded HC and i can use it
Astrix Ashburn said:
You manage to get back to HC Homescreen by now?
Click to expand...
Click to collapse

kaimyns said:
Yes, samsung loaded HC and i can use it
Click to expand...
Click to collapse
Mind sharing what the reason you downgrade to HC?

Fix Can't Mount any on device. Firm upgrade but not Complete using Odin, Bootloop.
tharpauklay said:
Hi Bro I got the same problem too, if you don't mind can you explain me how to fix it in detail,
thanks.
Click to expand...
Click to collapse
THIS STOCK RECOVERY ONLY WORKS ON P6800 OTHER DEVICE NON TESTED.
What Do You Need To Fix This
1. Odin and Pit get it Here ---> Odin3 v1.85.rar Pit and CWM Include in Odin.
2. Use this Stock Rom P6800XXLQ1_P6800OXALQ1_ATO. This is Open Austria Stock Rom Get it here ==>> Download and Unzip.
3. USB Connector.
3. All You Have and you a ready to Go.
4. Open Odin
5. Tab to Download Mode (( Start + Down Vol ))
6. Connect USB
7. Make Sure the port com detected.
8. Put the Pit file to PIT. Make Sure the PIT is GT-P6800 PIT for P6800XXLQ1_P6800OXALQ1_ATO.pit
9. On Files PDA Make Sure it's XXLQ1_OXALQ1_ATO.md5
10. Make Sure Tick Re-Partition, Auto Reboot and F. Reset Time
11. If you are Ready. Hit the START.
12. If you are successful Com Port box on the Blue and Green in color after the reset and show a pass.
Hope this will Help...

I just wanted to see if there is kies update for my tablet
Astrix Ashburn said:
Mind sharing what the reason you downgrade to HC?
Click to expand...
Click to collapse

Benpd said:
THIS STOCK RECOVERY ONLY WORKS ON P6800 OTHER DEVICE NON TESTED.
What Do You Need To Fix This
1. Odin and Pit get it Here ---> Odin3 v1.85.rar Pit and CWM Include in Odin.
2. Use this Stock Rom P6800XXLQ1_P6800OXALQ1_ATO. This is Open Austria Stock Rom Get it here ==>> Download and Unzip.
3. USB Connector.
3. All You Have and you a ready to Go.
4. Open Odin
5. Tab to Download Mode (( Start + Down Vol ))
6. Connect USB
7. Make Sure the port com detected.
8. Put the Pit file to PIT. Make Sure the PIT is GT-P6800 PIT for P6800XXLQ1_P6800OXALQ1_ATO.pit
9. On Files PDA Make Sure it's XXLQ1_OXALQ1_ATO.md5
10. Make Sure Tick Re-Partition, Auto Reboot and F. Reset Time
11. If you are Ready. Hit the START.
12. If you are successful Com Port box on the Blue and Green in color after the reset and show a pass.
Hope this will Help...
Click to expand...
Click to collapse
Help! Would doing this get Samsung Kies to work again?
I believe I have the HK GT-P6800. However, the box has a bunch of Arab texts on it. I bought it from Ebay.

[Q] In need of assistance (GT-I9505 UK EE)

Okay where do I start...
I was given this phone from a friend, and it was working fine,
rooted and no problems at all...
Followed this guide to install the "Google Play Edition" ROM >> http://www.technobuffalo.com/videos/how-to-turn-a-galaxy-s4-into-a-google-edition-phone/
All was working perfectly, then in a backup process using titanium backup, the phone crashed...
I'm stuck in a boot loop with only the Samsung Galaxy logo screen.
I can enter Download mode, but not recovery...
Have tried every ROM that I can think would be appropriate to restore but to no avail...
Even tried philz touch recovery, nothing seems to be working...
Odin always reports either write failed or <ID:0/003> There is no PIT partition.
Have tried writing just the .PIT file from >> http://forum.xda-developers.com/showthread.php?t=2265477
Have tried to recover using Kies, firmware downloads then "Error - F" Phone cannot be located...
The phone gets stuck with a small dot of a process bar in download mode and this read out in the top left of the screen:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
CSB-CONFIG-LSB; 0x30
WRITE PROTECTION: ENABLE
START [224, 1440]
ODIN: FLASH READ FAILURE
I'm at a total loss how to recover this, and if it's even possible to recover?
I would happily send it somewhere for repair, I have no warranty so i expect to pay, but no idea where to send?
Does any one have any advice or solution to this problem?
Much appreciated.

re: cannot get into recovery.
EvilM0narch said:
Okay where do I start...
I was given this phone from a friend, and it was working fine,
rooted and no problems at all...
Followed this guide to install the "Google Play Edition" ROM >> http://www.technobuffalo.com/videos/how-to-turn-a-galaxy-s4-into-a-google-edition-phone/
All was working perfectly, then in a backup process using titanium backup, the phone crashed...
I'm stuck in a boot loop with only the Samsung Galaxy logo screen.
I can enter Download mode, but not recovery...
Have tried every ROM that I can think would be appropriate to restore but to no avail...
Even tried philz touch recovery, nothing seems to be working...
Odin always reports either write failed or <ID:0/003> There is no PIT partition.
Have tried writing just the .PIT file from >> http://forum.xda-developers.com/showthread.php?t=2265477
Have tried to recover using Kies, firmware downloads then "Error - F" Phone cannot be located...
The phone gets stuck with a small dot of a process bar in download mode and this read out in the top left of the screen:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
CSB-CONFIG-LSB; 0x30
WRITE PROTECTION: ENABLE
START [224, 1440]
ODIN: FLASH READ FAILURE
I'm at a total loss how to recover this, and if it's even possible to recover?
I would happily send it somewhere for repair, I have no warranty so i expect to pay, but no idea where to send?
Does any one have any advice or solution to this problem?
Much appreciated.
Click to expand...
Click to collapse
During your unsuccessful flashing of the google edition rom you have lost ROOT and the custom and or stock recovery.
That is why you cannot go into recovery mode.
You are lucky that the .pit file did not flash, you could have ended up with a brick (unusable phone).
The .PIT file is the partition information table, if that is changed or damaged you would need to send
your phone to samsung or other phone repair shop to get it fixed.
What you need to do is to download and Odin flash the stock-rooted i9505 rom which can be found here:
http://www.androidfilehost.com/?fid=23060877490003683
This rom is pre-rooted and you will be able to get into recovery mode without any issues.
Once this is odin flashed, be sure to make a nandroid backup before flashing other cwm/twrp zip file roms.
The "phone cannot be located" error most likely means that you either do not have the proper samsung usb
driver installed or you need to check the usb cable connections to your computer and phone.
Perhaps use a different usb cable and a different usb port will fix this issue.
Just in case you need it, here is the link for the official usb drivers for the samsung s4 phone:
http://org.downloadcenter.samsung.c...5728593/MCCI_WHQL_USB_Modem_Driver_4.40.7.exe
Good luck!

No luck
Misterjunky said:
During your unsuccessful flashing of the google edition rom you have lost ROOT and the custom and or stock recovery.
That is why you cannot go into recovery mode.
You are lucky that the .pit file did not flash, you could have ended up with a brick (unusable phone).
The .PIT file is the partition information table, if that is changed or damaged you would need to send
your phone to samsung or other phone repair shop to get it fixed.
What you need to do is to download and Odin flash the stock-rooted i9505 rom which can be found here:
(Removed link due to under 10 posts)
This rom is pre-rooted and you will be able to get into recovery mode without any issues.
Once this is odin flashed, be sure to make a nandroid backup before flashing other cwm/twrp zip file roms.
The "phone cannot be located" error most likely means that you either do not have the proper samsung usb
driver installed or you need to check the usb cable connections to your computer and phone.
Perhaps use a different usb cable and a different usb port will fix this issue.
Just in case you need it, here is the link for the official usb drivers for the samsung s4 phone:
(Removed link due to under 10 posts)
Good luck!
Click to expand...
Click to collapse
Firstly thank you so much for reaching out to help me with this matter. :good:
Sadly no such luck, running odin 3 v1.85
This is the result I had...
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMH1-PRE-ROOTED-DEODEX-SuperSlim.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Going to try again using the drivers you have provided (restarting now)
Still no luck...
Odin v1.85
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMH1-PRE-ROOTED-DEODEX-SuperSlim.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
With no readout on the phone (as if the process never took place)
& using v3.07
Odin v3.07
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMH1-PRE-ROOTED-DEODEX-SuperSlim.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Through all these process only AutoReboot was checked...
The last attempt on v3.07 had the same result as a previous flash in which the process bar appears on the phone in download mode, but fails with the same read out on the device..
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
CSB-CONFIG-LSB; 0x30
WRITE PROTECTION: ENABLE
START [224, 1440]
ODIN: FLASH READ FAILURE

EvilM0narch said:
Okay where do I start...
I was given this phone from a friend, and it was working fine,
rooted and no problems at all...
Followed this guide to install the "Google Play Edition" ROM >> http://www.technobuffalo.com/videos/how-to-turn-a-galaxy-s4-into-a-google-edition-phone/
All was working perfectly, then in a backup process using titanium backup, the phone crashed...
I'm stuck in a boot loop with only the Samsung Galaxy logo screen.
I can enter Download mode, but not recovery...
Have tried every ROM that I can think would be appropriate to restore but to no avail...
Even tried philz touch recovery, nothing seems to be working...
Odin always reports either write failed or There is no PIT partition.
Have tried writing just the .PIT file from >> http://forum.xda-developers.com/showthread.php?t=2265477
Have tried to recover using Kies, firmware downloads then "Error - F" Phone cannot be located...
The phone gets stuck with a small dot of a process bar in download mode and this read out in the top left of the screen:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
CSB-CONFIG-LSB; 0x30
WRITE PROTECTION: ENABLE
START [224, 1440]
ODIN: FLASH READ FAILURE
I'm at a total loss how to recover this, and if it's even possible to recover?
I would happily send it somewhere for repair, I have no warranty so i expect to pay, but no idea where to send?
Does any one have any advice or solution to this problem?
Much appreciated.
Click to expand...
Click to collapse
Are you definitely using PDA (not Phone) mode in Odin when flashing ROMs? Also are you running Odin using 'administrator' mode if using Windows?
Sent from my Nexus 7 using xda app-developers app

PDA
gsmyth said:
Are you definitely using PDA (not Phone) mode in Odin when flashing ROMs? Also are you running Odin using 'administrator' mode if using Windows?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Yes 100% sure that I'm selecting PDA and Admin privileges.
Honestly I'm baffled I'm now charging the battery now to ensure the phone has enough to attempt this process again.
The battery icon fails to display a meter... Just an empty battery with a loading circle inside, assuming this is because the phone cannot access the images for the battery charging display? (The display that is present when the phone if turned off and you are charging)
I'm still stumped with what to try here. Any suggestions?
I'm sure if I can get at least back into recovery mode I could resolve it, but with odin failing due to pit each time it's just like banging my head against a wall :silly:

Screen Capture
Attached is a capture of the process using odin
Hope this can help in some way...

Edit: wrong thread

EvilM0narch said:
Attached is a capture of the process using odin
Hope this can help in some way...
Click to expand...
Click to collapse
No pit partition = YOUR PARTITION TABLE IS CORRUPTED. flash stock firmware with pit file in Odin 3.04, untick "auto-reboot", when it "pass", take off battery, inset it, boot into recovery, reset the phone, reboot
Sent from my Galaxy Nexus using xda premium

FAIL
samersh72 said:
No pit partition = YOUR PARTITION TABLE IS CORRUPTED. flash stock firmware with pit file in Odin 3.04, untick "auto-reboot", when it "pass", take off battery, inset it, boot into recovery, reset the phone, reboot
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks for this, have tried flashing with the rom that Misterjunky provided (with pit from samersh72) and fail
also tried the EE rom I found on the forum that samersh72 provided (with pit from samersh72) fail
tried flashing just the pit alone... fail
**making sure that "auto-reboot" was unticked**
In each process >> re-partition operation failed?
:crying:
I'm now downloading the EE rom direct from sammobile (Although for some reason I'm sure this device was originally Orange network)
Will update the situation when all has downloaded and I can try again.
Thanks to all for your input on this.

EvilM0narch said:
Thanks for this, have tried flashing with the rom that Misterjunky provided (with pit from samersh72) and fail
also tried the EE rom I found on the forum that samersh72 provided (with pit from samersh72) fail
tried flashing just the pit alone... fail
**making sure that "auto-reboot" was unticked**
In each process >> re-partition operation failed?
:crying:
I'm now downloading the EE rom direct from sammobile (Although for some reason I'm sure this device was originally Orange network)
Will update the situation when all has downloaded and I can try again.
Thanks to all for your input on this.
Click to expand...
Click to collapse
re-partition must work. make sure that you are using the right pit for your variant, unzip it before putting it in pit window in odin
flash your original EE official rom from sammobile

Making sure all is right
samersh72 said:
re-partition must work. make sure that you are using the right pit for your variant, unzip it before putting it in pit window in odin
flash your original EE official rom from sammobile
Click to expand...
Click to collapse
Pit variant I have is from you for my device "i9505", so that would be the correct pit file?
Still waiting on the EE official rom from sammobile to download, as long as all is correct I will try again once downloaded.

Flash MH8 or newer...
In my case it was not possible to downgrade... i think that if you flash a mh8 or higher, after that is not possible downgrade because new bootloaders.
Enviado do meu GT-I9505 utilizando Tapatalk 4

MH8
sanespro said:
Flash MH8 or newer...
In my case it was not possible to downgrade... i think that if you flash a mh8 or higher, after that is not possible downgrade because new bootloaders.
Enviado do meu GT-I9505 utilizando Tapatalk 4
Click to expand...
Click to collapse
Reading more on this it does seem you are right, can you elaborate as to what is mh8?
Is this a specific rom? Reading what I could find it seems it will only allow custom roms on the device or a rom that is MH8?
Can anyone shed some light on this?
Going to download the latest BTU MH8 for UK and give that a try? Hopefully I'm making progress as the MH8 rule would explain why it's not working

EvilM0narch said:
Reading more on this it does seem you are right, can you elaborate as to what is mh8?
Is this a specific rom? Reading what I could find it seems it will only allow custom roms on the device or a rom that is MH8?
Can anyone shed some light on this?
Going to download the latest BTU MH8 for UK and give that a try? Hopefully I'm making progress as the MH8 rule would explain why it's not working
Click to expand...
Click to collapse
be aware MH8 firmware will lock your bootloader, so you will not be able to downgrade.
your problem is in partition table. your solution is with the pit file flashed with your stock firmware.
if it fail, see odin troubleshooting in my thread

samersh72 said:
be aware MH8 firmware will lock your bootloader, so you will not be able to downgrade.
your problem is in partition table. your solution is with the pit file flashed with your stock firmware.
if it fail, see odin troubleshooting in my thread
Click to expand...
Click to collapse
I believe I am already flashed to MH8, but I am not sure.
I have tried flashing the pit located in your sig for my GT-I9505 but it always fails?
Is there something else I am missing or not doing correctly? I have been following each guide and double checking the steps before I try anything.
No matter what action i take the pit flash with the file "I9505_pit file.zip" located here >> http://forum.xda-developers.com/showthread.php?t=2265477
always fails? I have no idea why? Or which steps to take.
Sorry to be such a pain,

EvilM0narch said:
I believe I am already flashed to MH8, but I am not sure.
I have tried flashing the pit located in your sig for my GT-I9505 but it always fails?
Is there something else I am missing or not doing correctly? I have been following each guide and double checking the steps before I try anything.
No matter what action i take the pit flash with the file "I9505_pit file.zip" located here >> http://forum.xda-developers.com/showthread.php?t=2265477
always fails? I have no idea why? Or which steps to take.
Sorry to be such a pain,
Click to expand...
Click to collapse
yes this is the right pit file.
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.

Another machine...
samersh72 said:
yes this is the right pit file.
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Click to expand...
Click to collapse
Have tried all except another computer, someone mentioned that an XP based machine works best.
Those are like gold-dust around here, I will try this process on a laptop and see if I can get it to work... That seem to be my best bet for now
Again kudos for all of the help and the quick replies. :good:

All hope seems lost....
After finally trying every method on this PC
(All versions of Odin I could find, all usb ports, original usb lead, kies is disabled, drivers un-installed/re-installed)
And having no luck...
I have had some different results on the laptop;
all other versions of odin I tried (v1.83, v1.85, v3.04, v3.06) just fail;
(again all usb ports, original usb lead, kies is disabled, drivers un-installed/re-installed)
And this read out...
flashing pit and rom > Complete(write) operation failed.
flashing only pit > Complete(write) operation failed.
However on Odin3 v3.07
flashing pit and rom > There is no pit partition
flashing only pit > There is no pit partition
and on v3.09
flashing pit and rom > re-partition operation failed.
flashing only pit > re-partition operation failed
I'm at a total loss now. I have a chance to send it back to cash generator as thats where my friend had purchased it from.
Is it worth doing so?
Any one have any thoughts or suggestions to aid this situation?
:crying:

I guess my only option here as I cannot get it to flash, is to either sell the phone in the state it is in.
Or send it back to Cash Generator to see if they will replace/refund it.
:crying:

samersh72 said:
yes this is the right pit file.
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Click to expand...
Click to collapse
Okay so just got my device back from my friend with the Jtag, and this is the report he run for me
===============
= JTAG REPORT =
===============
Open serial port...OK
Connecting to the RIFF Box...OK
Connecting to the dead body...OK
Detected dead body: DETECTED
Set I/O Voltage reads OK, TCK Frequency is OK
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Flashing the dead body...
No Resurrection Data is available for the eMMC Chip with Capacity = 0B
ERROR: Failed use to Resurrection Data for the eMMC Chip with Capacity = 0B
ERROR: Selected FLASH Chip was not initialized by the DCC Loader.
Where can I get eMMC chip repaired?

[Q] No OS installed

I have
SM-G900P UD
SW: ND2
Last rom.MOAR v2.0
from within TWRP, I wiped internal storage, not knowing it would wipe EVERYTHING, it then said no os installed. I have searched and can only find a stock image on sam mobile, but it downloads at like 15kb/s then fails after a few hours. Does anyone know where i can find the image elsewhere?
I also cannot enter twrp after i reset it, BUT i can get into download mode. So i am a bit stuck now. Odin cannot be used without usb debugging right?

/
Ki11ian said:
I have
SM-G900P UD
SW: ND2
Last rom.MOAR v2.0
from within TWRP, I wiped internal storage, not knowing it would wipe EVERYTHING, it then said no os installed. I have searched and can only find a stock image on sam mobile, but it downloads at like 15kb/s then fails after a few hours. Does anyone know where i can find the image elsewhere?
I also cannot enter twrp after i reset it, BUT i can get into download mode. So i am a bit stuck now. Odin cannot be used without usb debugging right?
Click to expand...
Click to collapse
You can push a rom to the phone in recovery if you have the /android-sdk/platform-tools/ installed. In CMD type: adb push namerom.zip /sdcard/. Or sideload a rom in recovery in the sideload option, place the rom in the platform-tools folder and in cmd type: adb sideload namerom.zip. First reflash TWRP with Odin off course.

gee2012 said:
/
You can push a rom to the phone in recovery if you have the /android-sdk/platform-tools/ installed. In CMD type: adb push namerom.zip /sdcard/. Or sideload a rom in recovery in the sideload option, place the rom in the platform-tools folder and in cmd type: adb sideload namerom.zip. First reflash TWRP with Odin off course.
Click to expand...
Click to collapse
But recovery is not there anymore, download mode is all i can go to, otherwise is just sits at the 'Samsung S5 powered by android' screen forever

Ki11ian said:
But recovery is not there anymore, download mode is all i can go to, otherwise is just sits at the 'Samsung S5 powered by android' screen forever
Click to expand...
Click to collapse
Flash a custom recovery with Odin in downloadmode as i explained in the first post and then use adb sideload in recovery mode.

gee2012 said:
Flash a custom recovery with Odin in downloadmode as i explained in the first post and then use adb sideload in recovery mode.
Click to expand...
Click to collapse
I'm having to same problem as the first person except when I try to flash the stock firmware through ODIN, it keeps failing. Can you help?

cdickerson1185 said:
I'm having to same problem as the first person except when I try to flash the stock firmware through ODIN, it keeps failing. Can you help?
Click to expand...
Click to collapse
Make sure the correct drivers are installed and terminate KIES in windows task manager before you flash with Odin.

gee2012 said:
Make sure the correct drivers are installed and terminate KIES in windows task manager before you flash with Odin.
Click to expand...
Click to collapse
Alright, so I killed kies through windows task manager but odin is still failing. i keep getting this same message:
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900PVPU1ANE5_1750661_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I just want to restore to stock, my device might be soft-bricked. I'm no sure

cdickerson1185 said:
Alright, so I killed kies through windows task manager but odin is still failing. i keep getting this same message:
I just want to restore to stock, my device might be soft-bricked. I'm no sure
Click to expand...
Click to collapse
Just flash phillzz recovery in odin.
Root your device with the latest supersu.zip (google it)
Get a micro sd
Put from your pc any android rom on your sd card
Flash as instructions from other rok developer.
Then you are at a custom rom
From there on
Download stock firmware from samsung
Flash using odin.
Then you should get back on stock again
Sent from my klte using XDA Free mobile app

This happens to me I have twrp installed and I want root and custom rom its t mobile also but do I just put supersu zip on micro sd card and custom rom then boot into twrp and install both? Help Please

For those having this issue check this :
http://forum.xda-developers.com/showthread.php?t=3326344
Sent from my SM-G900F using XDA Free mobile app

SOLVED - Can't boot to CWM or TWRP - SM-T530

I've flashed the most recent versions of both CWM and TWRP, but it boots into android stock recovery every time.
I tried using the hardware buttons. I tried booting into recovery from ROM manager, first setting up the correct recovery in settings
I also tried the fast boot options, but I can't locate my device through the "fastboot devices" command, even when run in administrator mode.
There's an option described elsewhere, for other devices, which involves unchecking reboot when flashing the recovery in Odin, and then temporarily dislodging the battery, but the 530 has a closed back cover so I can't do that either.
I'm really stuck here, and any help would be appreciated
BTW running 4.4.2

MadBigMadBoatMan said:
I've flashed the most recent versions of both CWM and TWRP, but it boots into android stock recovery every time.
I tried using the hardware buttons. I tried booting into recovery from ROM manager, first setting up the correct recovery in settings
I also tried the fast boot options, but I can't locate my device through the "fastboot devices" command, even when run in administrator mode.
There's an option described elsewhere, for other devices, which involves unchecking reboot when flashing the recovery in Odin, and then temporarily dislodging the battery, but the 530 has a closed back cover so I can't do that either.
I'm really stuck here, and any help would be appreciated
BTW running 4.4.2
Click to expand...
Click to collapse
If you flash custom recovery via Odin and have this situation you need untick restart checkbox in Odin . And then handly reboot to recovery .
There are no fastboot mode in our tab .

repey6 said:
If you flash custom recovery via Odin and have this situation you need untick restart checkbox in Odin . And then handly reboot to recovery .
There are no fastboot mode in our tab .
Click to expand...
Click to collapse
Hello, and thank you for responding.
I run ODIN 3.09, and I must assume by "restart" you mean the "Auto reboot" box? If so, I've tried with that box unchecked, and then booting into recovery with the buttons, but it still brings me to stock recovery. And I can't flash any ROMs from that one obviously.
Tried again now after a wipe/factory reset, still goes to stock.
I must admit this particular challenge is proving a but frustrating. Usually I get somewhere, anywhere...

MadBigMadBoatMan said:
Hello, and thank you for responding.
I run ODIN 3.09, and I must assume by "restart" you mean the "Auto reboot" box? If so, I've tried with that box unchecked, and then booting into recovery with the buttons, but it still brings me to stock recovery. And I can't flash any ROMs from that one obviously.
Tried again now after a wipe/factory reset, still goes to stock.
I must admit this particular challenge is proving a but frustrating. Usually I get somewhere, anywhere...
Click to expand...
Click to collapse
Do you have root ?

repey6 said:
Do you have root ?
Click to expand...
Click to collapse
Yes, root is fine
Add this to methods tried: Wiping cache+wipe user dats+factory reset - download mode without booting to stock rom, flashing recovery with reboot disabled, straight to recovery.....
Still stock recovery
I looked into safestrapping, but it seems that's just for locked bootloaders
And by the way, I tried boot to bootloader from quickboot, got me to download mode... so maybe it is locked? Wasn't listed under devices
And, I reboot to recovery with power+home+volume up
Is there any other way to reboot this device to recovery?

MadBigMadBoatMan said:
Yes, root is fine
Add this to methods tried: Wiping cache+wipe user dats+factory reset - download mode without booting to stock rom, flashing recovery with reboot disabled, straight to recovery.....
Still stock recovery
I looked into safestrapping, but it seems that's just for locked bootloaders
And by the way, I tried boot to bootloader from quickboot, got me to download mode... so maybe it is locked? Wasn't listed under devices
And, I reboot to recovery with power+home+volume up
Is there any other way to reboot this device to recovery?
Click to expand...
Click to collapse
Sorry i was busy .
That correct understand i have some questions , sorry .
Settings-general-about device name of your device ? Your firmware ?
Can you give me copy Odin log of flashing recovery ?

repey6 said:
Sorry i was busy .
That correct understand i have some questions , sorry .
Settings-general-about device name of your device ? Your firmware ?
Can you give me copy Odin log of flashing recovery ?
Click to expand...
Click to collapse
Device name
T530 (i just set it up after factory reset, so this is my input I think)
Model number
SM-T530
Android Version
4.4.2
Kernel Version
3.4.0-1090229
Build number
KOT49H.T530XXU1ANH7
ODIN Gives me this:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> RQT_CLOSE !!
<ID:0/010> RES OK !!
<ID:0/010> Removed!!

MadBigMadBoatMan said:
Device name
T530 (i just set it up after factory reset, so this is my input I think)
Model number
SM-T530
Android Version
4.4.2
Kernel Version
3.4.0-1090229
Build number
KOT49H.T530XXU1ANH7
ODIN Gives me this:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> RQT_CLOSE !!
<ID:0/010> RES OK !!
<ID:0/010> Removed!!
Click to expand...
Click to collapse
OK . Thanks . I propose to get root at first by CF-Root/CF-Auto-Root . Link https://download.chainfire.eu/441/C...uto-Root-matissewifi-matissewifizs-smt530.zip . Unpack and flash via Odin . Dont unchecked checkboxes . When you will have root you can to use different method that to install custom recovery ( i recomend last TWRP by @sub77 http://android.comtek-wiebe.de/index.php?folder=T3BlblJlY292ZXJ5 )

repey6 said:
OK . Thanks . I propose to get root at first by CF-Root/CF-Auto-Root . Link https://download.chainfire.eu/441/C...uto-Root-matissewifi-matissewifizs-smt530.zip . Unpack and flash via Odin . Dont unchecked checkboxes . When you will have root you can to use different method that to install custom recovery ( i recomend last TWRP by @sub77 http://android.comtek-wiebe.de/index.php?folder=T3BlblJlY292ZXJ5 )
Click to expand...
Click to collapse
Wiped cache, factory reset, and rooted using autoroot from your link, then flashed the revovery image.
Still not able to access custom recovery, only stock.
Then I installed Rashr, and was able to reboot to TWRP from there, so my problem is solved
Thanks a lot for taking the time to help out!
Here's the Play Stor link for Rashr:
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools&hl=en

[SOLVED] Weird white bar while booting SM-N910G (Flashing repair firmware solved it)

Past week when I manually rebooted my phone Samsung galaxy note 4 sm-n910g, it never booted beyond Samsung galaxy note 4 screen.
(Tried flashing stock ROM using Odin , it didn't work.
Also tried flashing twrp recovery using Odin, that too didn't work.)
First thing I observed which was never before was white color half bar nearly as if its indicating 50% of something which I still don't know and have searched everywhere on web about it.. Still its unanswered
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone didn't go beyond Samsung note 4 logo. Led kept on blinking light blue to dark for nealy half n hour ..
I removed battery and again checked, result was same .. Thought may be the latest OTA did something. I tried using three finger recovery boot but unfortunately phone didn't boot into recovery. Tried to go into safe mode boot that too didnt work. When I tried three finger download mode , phone did went into download boot.
I downloaded latest firmware for this phone and used Odin to flash it . it successfully flashed and phone rebooted but still with the same weird white bar and didn't go past Samsung logo and led kept flashing ..
I also tried to flash twrp recovery as I wanted to get into recovery so that from there I would atleast clear cache or do factory reset..
Odin flashed twrp but still stuck at same note 4 logo..
If anyone facing or faced this problem? Plz experts kindly make me understand exactly what might be the problem software or hardware which is causing this ..
Its been one week since phone is like this ..it was my daily driver for 1 year ,had my all work data inside it :crying:

omarrph said:
Past week when I manually rebooted my phone Samsung galaxy note 4 sm-n910g, it never booted beyond Samsung galaxy note 4 screen.
(Tried flashing stock ROM using Odin , it didn't work.
Also tried flashing twrp recovery using Odin, that too didn't work.)
First thing I observed which was never before was white color half bar nearly as if its indicating 50% of something which I still don't know and have searched everywhere on web about it.. Still its unanswered
Phone didn't go beyond Samsung note 4 logo. Led kept on blinking light blue to dark for nealy half n hour ..
I removed battery and again checked, result was same .. Thought may be the latest OTA did something. I tried using three finger recovery boot but unfortunately phone didn't boot into recovery. Tried to go into safe mode boot that too didnt work. When I tried three finger download mode , phone did went into download boot.
I downloaded latest firmware for this phone and used Odin to flash it . it successfully flashed and phone rebooted but still with the same weird white bar and didn't go past Samsung logo and led kept flashing ..
I also tried to flash twrp recovery as I wanted to get into recovery so that from there I would atleast clear cache or do factory reset..
Odin flashed twrp but still stuck at same note 4 logo..
If anyone facing or faced this problem? Plz experts kindly make me understand exactly what might be the problem software or hardware which is causing this ..
Its been one week since phone is like this ..it was my daily driver for 1 year ,had my all work data inside it :crying:
Click to expand...
Click to collapse
Download repair firmware with pit file from tsar3000.com and flash in odin with pit file.
Try odin 3.10 its very stable in my opinion i have never any issues with it.
Download and extract the file you will get repair firmware and pit file choose in odin AP for firmware and PIT for pit file
Uncheck autoreboot in odin and check( nand erase all ) and flash HIT START.
Once odin shows pass take out battery and insert again and boot into recovery.
Then do wipecache & data factory reset and reboot.
Report back and tell me how it goes.
Download link
https://www.androidfilehost.com/?fid=24411628330025773

Trex888 said:
Download repair firmware with pit file from tsar3000.com and flash in odin with pit file.
Try odin 3.10 its very stable in my opinion i have never any issues with it.
Download and extract the file you will get repair firmware and pit file choose in odin AP for firmware and PIT for pit file
Uncheck autoreboot in odin and check( nand erase all ) and flash HIT START.
Once odin shows pass take out battery and insert again and boot into recovery.
Then do wipecache & data factory reset and reboot.
Report back and tell me how it goes.
Download link
https://www.androidfilehost.com/?fid=24411628330025773
Click to expand...
Click to collapse
I will report it back in evening . But will it delete my documents and data? Or they will be there if all things go well? Kindly do reply me back before flash process

They will be delete from internal memory for sure.
Not from microsd card.

Trex888 said:
They will be delete from internal memory for sure.
Not from microsd card.
Click to expand...
Click to collapse
Bro tried to download it whole day, getting very slow download speed of around 15 kbps .. Failed to download with three attempts which hardly went past 40 percent..
Data's inside the phone were really important for my work point of view and mostly were saved on phone memory rather than extcard.. Photos and videos were important but I can manage without them but other data's I am concerned :crying:
Can i find same recovery on web with better speed? Same download crisis was there when I tried to download latest stock ROM . I managed to download from updato website.. Previously I searched for samfirm software which then made be find this website on xda about updato . download was smooth..
Also tmrw I am giving phone to service person even though its warranty is expired. If he can't fix it then I will revert back to download link which u provided .
Bro can you tell me what is that half white bar ? Actually what is it related to ,is it software or hardware.. Also I am thinking this all may be due to faulty battery ..if it might be the case

omarrph said:
Bro tried to download it whole day, getting very slow download speed of around 15 kbps .. Failed to download with three attempts which hardly went past 40 percent..
Data's inside the phone were really important for my work point of view and mostly were saved on phone memory rather than extcard.. Photos and videos were important but I can manage without them but other data's I am concerned :crying:
Can i find same recovery on web with better speed? Same download crisis was there when I tried to download latest stock ROM . I managed to download from updato website.. Previously I searched for samfirm software which then made be find this website on xda about updato . download was smooth..
Also tmrw I am giving phone to service person even though its warranty is expired. If he can't fix it then I will revert back to download link which u provided .
Bro can you tell me what is that half white bar ? Actually what is it related to ,is it software or hardware.. Also I am thinking this all may be due to faulty battery ..if it might be the case
Click to expand...
Click to collapse
No idea about white bar never seen anything like it.
Probably its software issue .
Did you flash any rom or kernel before this white bar begin to appear?

Trex888 said:
No idea about white bar never seen anything like it.
Probably its software issue .
Did you flash any rom or kernel before this white bar begin to appear?
Click to expand...
Click to collapse
No modifications were done. It was running on stock Samsung ROM. Not rooted at all and not even Knox was tripped before it .
Few days ago before start of this major problem I can only remember is that I did December update through OTA. It rebooted and android updated . I remember I didn't went into recovery and didn't cleaned cache or anything ,just normal reboot and phone was working . The day when it started I thought I should clean the screen. I powered off phone and with dry cloth cleaned the screen, back panel and battery .. When I turned on phone, first time I saw this bar, phone didn't go past Samsung logo. It was then when I tried to go into recovery, it didn't go to recovery. I tried to safeboot that too didn't work. Only download mode was working . so I searched on internet about it.. I thought maybe update did something so I downloaded latest stock to check. Every thing went smooth and pass msg was on Odin but phone was having same half white bar and didn't go past Samsung logo.
I really don't understand till date what might have caused it . was it update, battery or some hardware issue

If you can flash twrp you can copy all data from internal memory and then follow repair firmware method that i mentioned earlier.
Flash twrp in odin of your model.
Go to mount and mount usb storage.
And connect via usb cable to pc .
Here you can see your whole internal memory & data you can copy to pc .
Make sure download latest twrp recovery otherwise in older versions usb storage will not work.
Hope that helps

Trex888 said:
If you can flash twrp you can copy all data from internal memory and then follow repair firmware method that i mentioned earlier.
Flash twrp in odin of your model.
Go to mount and mount usb storage.
And connect via usb cable to pc .
Here you can see your whole internal memory & data you can copy to pc .
Make sure download latest twrp recovery otherwise in older versions usb storage will not work.
Hope that helps
Click to expand...
Click to collapse
Bro plz don't get annoyed and kindly send link of latest twrp for n910g..
Previously I downloaded from
https://dl.twrp.me/trltedt/
And installed via Odin successfully but couldn't get phone into recovery boot even doing all things . if I could go into it and save data I could have gone for recovery firmware installation without hesitation.
Plz from ur knowledge provide me a link for latest twrp and I will flash and report back bro

omarrph said:
Bro plz don't get annoyed and kindly send link of latest twrp for n910g..
Previously I downloaded from
https://dl.twrp.me/trltedt/
And installed via Odin successfully but couldn't get phone into recovery boot even doing all things . if I could go into it and save data I could have gone for recovery firmware installation without hesitation.
Plz from ur knowledge provide me a link for latest twrp and I will flash and report back bro
Click to expand...
Click to collapse
This is the latest version of twrp that you have.
Flash twrp.tar in odin 3.10 and most important ( uncheck auto reboot in odin options).
Once odin shows pass take out battery and insert again and immediately press (volume up + home + power button ) you should be in twrp.

Trex888 said:
This is the latest version of twrp that you have.
Flash twrp.tar in odin 3.10 and most important ( uncheck auto reboot in odin options).
Once odin shows pass take out battery and insert again and immediately press (volume up + home + power button ) you should be in twrp.
Click to expand...
Click to collapse
I did all things correctly. There was pass msg in Odin yet again. I removed battery and manually pressed vol up, home and power to get into recovery. Phone had msg booting in recovery but after it its blank black screen only bro..
When I am into my computer device manager and still connected phone with USB I can see its there in portable device and also in universal serial bus controllers

Bro OK let's suppose something is not letting my phone to boot up and also recovery mode boot . is it possible that it might be due to corrupt partition or phone memory which is not letting phone to boot up.
Is there any way using my external SD card as a storage where I can install twrp and get into recovery? So that it may allow me to go inside of recovery mode and select USB mount option ? Is it practical ? Can this be done using external SD card? If so plz tell me

omarrph said:
Bro OK let's suppose something is not letting my phone to boot up and also recovery mode boot . is it possible that it might be due to corrupt partition or phone memory which is not letting phone to boot up.
Is there any way using my external SD card as a storage where I can install twrp and get into recovery? So that it may allow me to go inside of recovery mode and select USB mount option ? Is it practical ? Can this be done using external SD card? If so plz tell me
Click to expand...
Click to collapse
Have a look there mate, it might help you : https://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114

i have downloaded repair firmware file from https://www.androidfilehost.com/?fid=24411628330025773
there are these files inside them.. how do i install them? i have searched on google but only could find steps for using AP but what about other files? do i have to use them and how to kindly guide me steps

Trex888 said:
Download repair firmware with pit file from tsar3000.com and flash in odin with pit file.
Try odin 3.10 its very stable in my opinion i have never any issues with it.
Download and extract the file you will get repair firmware and pit file choose in odin AP for firmware and PIT for pit file
Uncheck autoreboot in odin and check( nand erase all ) and flash HIT START.
Once odin shows pass take out battery and insert again and boot into recovery.
Then do wipecache & data factory reset and reboot.
Report back and tell me how it goes.
Download link
https://www.androidfilehost.com/?fid=24411628330025773
Click to expand...
Click to collapse
i have downloaded repair firmware file from https://www.androidfilehost.com/?fid=24411628330025773
there are these files inside them.. how do i install them? i have searched on google but only could find steps for using AP but what about other files? do i have to use them and how to kindly guide me steps

@Trex888,
i followed the step and installed repair firmware..
First i selected only AP and PIT file.
after odin passed i removed battery and booted to recovery.. Android robot came with RED dead sign.. still recovery booted and i cleared cache and factory reset.
Phone in bootloop..
SO again i went to download mode and selected all other files like CSC, BL and CP
ODIN came with following fail..
d in Odin
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N910GDTU1BOE4_CL4980903_QB5063813_REV00_user_lo w_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N910GDD1BOC1_REV00_CL_1905730.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ODD_N910GODD1BOE1_CL4965595_QB5034215_REV00_us er_low_ship_MULTI_CERT_.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response from boot-loader
<ID:0/008> cache.img.ext4
<ID:0/008> hidden.img.ext4
<ID:0/008> FAIL! (Write)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried to go into recovery but it said firmware failed please connect to kies for recovery..
I went to ODIN and just flashed AP firmware this time and it passed .. Mannually reboooted to recovery it rebooted and then i rebooted phone and now its on stock rom 5.0.1..
Now i dont see any white half bar while booting.. Phone is booting properly and i checked all sound, camera, torch and wifi, mobile data working..
So steps i did were ok or anything i missed or messed?? some thought here please