Devs Please Make a Mod That Tones Down Speaker Volume. - One (M7) General

In many situations - alone in room, night time, quiet place, etc - the speakers are too loud even when on the lowest setting. I rarely ever turn the volume past 2 bars. Please make a mod that tones down the speaker volume.
Thanks.

Related

Adjust volume to 1-19%?

I've seen a lot of posts about volume being too quiet, but none about being too loud. I have a Jabra wired in-ear stereo headset, and putting the system volume to it's lowest, non-muted, setting of 20% while turning down the volume of Slide2Play to it's lowest, it is still too loud. It's not too loud to listen to, I just mean I want to be able to make it barely audible if I have to, for instance if a co-worker says something I don't want to be forced to take the headset off.
Is there any way to adjust the volume to somewhere in the 1-19% range rather than 20% being the lowest?
The headset is pretty comfortable, so I'd hate to have to buy an out-of-ear model which I imagine would be less loud at the lowest setting.
Mind you, I don't want to lower the overall volume. I like that it can be loud too, I just need it to be a little more quiet when I'm in the zone trying to bend a piece of code or SQL statement to my will so I don't miss what people say around me.. hehe.
just open ur headset and put a higher value resistor in it.
hope u understand my words.
Thanks for the advice but I'm not much of an electrician.
I'm more looking for a program, cab or registry tweak that allows for greater control of the volume rather than the simple Mute, Quiet, Medium, Loud, Louder, Very Loud settings that our BAs come with.
I found a cab that allows you to adjust the bass and treble which was very handy, but I can't seem to find one that allows more refined volume levels all around.
hv u tried the SRS WOW HD? it has a tab to adjust the input and output gain it decreases the volume level.
sschrupp said:
Thanks for the advice but I'm not much of an electrician.
I'm more looking for a program, cab or registry tweak that allows for greater control of the volume rather than the simple Mute, Quiet, Medium, Loud, Louder, Very Loud settings that our BAs come with.
I found a cab that allows you to adjust the bass and treble which was very handy, but I can't seem to find one that allows more refined volume levels all around.
Click to expand...
Click to collapse
Hmm, that SRS WOW HD does help. Although it seems to like to completely mute my device if I unplug my headphones, or plug them in. It kind of seems like I need to reset the device after I plug or unplug my headset.
Kind of annoying, but music does sound better and I can make it more quiet. Thanks for the suggestion.
Anyone know how to keep it from disabling sound on my device when I plug/unplug my headset?

better volume control on the call

hi guys,
just got my new x1. I am familiar with WM and HTC as I have spent almost whole summer playing with Kaiser so x1 is nothing new to me. however, the first thing which i have noticed is that the volume during call in x1 is just too loud although it's set to minimum. Kaiser wasn't that loud. so, the thing is that I am bit of suffering when i need to talk to someone as the volume is too loud and I can hear "beeeeep" in my ear. crap, isn't it?
do you guys by any chance know if there is any way to change the speaker volume while on the call so that it's not as loud as it is now? is there any plugin allowing user to better control the volume of the interlocutor?
any thoughts will be highly appreciated!
Thanks
no ideas? does that mean I am the only one suffering from this issue? :/
during calling just presse up-down hardware button on upside of the x1
in normal operation they set system/ring volume, during phone operation they set the speaker call volume
I have the same problem. I have set the volume to the lowest possible setting yet it is still loud. I would expect the lowest possible setting to be mute.
Is there anyway of getting it so that the volume bar works in a more sensible way?
*bump*
Anything on this? I can't keep my phone on my ear when i'm talking with someone. Have to keep a few cm's distance or my head splits. Call volume is at minimum..
hey there. first post on the forum but i've been reading for a few weeks already and finally bought an Xperia.
Anyway, I have the same problem as you guys: even on the lowest setting, volume is still too loud during a call. I've looked accross the net and didn't find any relevant info on how to solve this does anyone have any idea on how that would be solvable ? registry trick or something ?
thanks in advance
hmmm, my situation is totally different. My X1i volume during call is set to maximum and it's too quiet for me. When I'm outside, on the street I can't hear person hanging on the other side. At home, when it's quiet it's all ok.
My ears are quite good , I've tested them 2 months ago.
If you guys have already tried what webguitar mentions above, then i think you may have a problem with your specific handset
There are a couple of threads in the forum about ways to increase volume ...but I've certainly not seen anything suggesting its too loud
Have been using mine since November and never found the volume to be too high
D-fens said:
hmmm, my situation is totally different. My X1i volume during call is set to maximum and it's too quiet for me. When I'm outside, on the street I can't hear person hanging on the other side. At home, when it's quiet it's all ok.
My ears are quite good , I've tested them 2 months ago.
Click to expand...
Click to collapse
Same here...but using SRS Wow HD i managed to get louder sound.
well, of course i've used the side rocker -_-
it's just that i feel that instead of adjusting between
quiet - - - - - - - - - - loud
it seems more like it adjusts between
normal - - - - - - - - - loud
again, i'm talking about the volume during a call, not for the speaker or the system sound.
it isn't that loud if you are in a noisy environement, but when i'm sitting in the silence of
my room... it just feels loud. i never had such a problem with any previous phones o_o
and various changes in HKCU\ControlPanel\SoundCategories\ doesn't seem to change anything
so i was thinking, maybe there is a "minimum volume value" setting somewhere...
Nocturnal310, D-fens, please do not throw the topic off course
Definitely there IS a issue with the volume being FAR too loud on the lowest setting (this is 20% for me)
I'm embarrassed to talk on the phone in the office, as everyone within five meters hear both sides of my conversation and asks if I'm deaf. I'm not! It's the bloody phone!
Is there a way to set the speaker volume to less than 20% (5% for example)?

Ear Volume

Is it just my phone or is the volume from the earpeice very loud on the HD2?
I have turned my down as far as I can get it & it's still well loud when I hold the phone to my ear.
That's just weird. On my device the earpierece volume was far too quiet. On max I kept on reaching for the volume rocker upwards...
Wow.
If I turned it up over half way the earpiece vibrates & it's deafening.
Yes it is loud.
Makes a change - usually its people complaining that its too quiet
Yes, with mine device is the same!
I've lowered the volume control in-call to the minimum (without any bars visible) and it is still too loud.
Nedd a fix for this, my ear are going to melt!!!
yes its to loud.
i dont know exactly, but is there a setting the advanced config for the ear volume?
EDIT: maybe i found a solution. I set the setting in the "sound & Display", that is coming after the profiles, on off. In german it is called "eine lautstärke", i dont know exactly what this is in english It is the setting that controlls that you only use "one loudness" for system and the ear. After set to off i think i can put the ear volume very low.
phatair, i dont think that has anything to do with the ear volume.. it says "mutural volume" (or something) about ring tone and system volume.
i agree the current ear volume is too loud, i can put my phone on the desk and still hear it loud and clear on the lowest volume..

[Q] Ringing is very quiet!

When I test a ringtone it plays it about 2x louder than when it actually rings! I've disable all of the fancy sound settings i.e. louder in bag etc. both system and ring volume are on max but still it is very very quiet!
Any ideas?
Try setting volume controls to single slider, and then back to dual sliders, and checking the ring volume. My phone is mega loud, for the first time with HTC phones in 10 years I don't have the volume to max.

Earpiece volume

I just got it and noticed the earpiece volume is still low even with the volume turned all the way up.
Is there a setting I missed or maybe a registry fix?
Any help would be appreciated
HTC HD2
OS 5.2
MANILLA 2.5.2
ROM 2.13
RADIO 2.10
Don't mean to offend you. I had the same issue but was more of a user issue. I kept increasing the volume not paying attention that I was adjusting the ring volume and not the system volume.
if that doesnt work you may need to return it. My friends HD2 had low speaker volume and low earpiece volume. As much as we tried, we couldn't get it to go.
N1M1TZ - No offense taken, I only adjusted the volume during a call and at max it is still quiet.
I checked the settings/sounds, no adjustment for the earpiece just the ringer and the system sounds.
marduk79 - after doing a little digging I have found that this is a common problem with this particular batch of phones.
The first batch came out and the volume was set way to high that it was actually blowing out the earpiece.
I think I may have found a solution, if it works I will post it.
Thanks for the assist.
So what is the solution... My first one had sweet loud ear piece volume. But alas, the speaker blew. My replacement is alright, but I want it to be a tad bit higher... Lots of years of loud punk rock have made me slightly def I think...
Anyone know if there is a cab or registry tweak or something that will make the volume louder in the ear piece speaker?
marduk79 said:
if that doesnt work you may need to return it. My friends HD2 had low speaker volume and low earpiece volume. As much as we tried, we couldn't get it to go.
Click to expand...
Click to collapse
How low? Like so low you couldn't hear it, or just low enough to be annoying? Basically my first HD2 was nice and loud. The new one is about 3 bars lower sounding turned all the way up... Which annoys me because I know the other one was louder and it's hard to hear people if I'm in an environment with a lot of background noise.
I feel like if I tried to take it in to get a replacement they would think I was nuts.
headphone and phone speaker too low
I too beleive the headphone volume is way too low, when listening to music or taking a call on the headphones it is barely loud enough too hear if there is any background noise such as traffic or conversations going on nearby. I have the volume about 75% when listening to talk radio stations, on my headset, no background noise present and it is at normal listening level. So if there is background noise, I need 100% for it to be loud enough to hear clearly. The phone speaker is not much better, when listening to calls on speakerphone the percentages are about the same for equvilent listening circumstances. I have tried "AudioPara3 TMO" and notice little or no difference in sound. Does anyone know of anything that will increase the maximum volume level for both speakerphone and headphones?
I'd like to know if there is any registry hack to increase the line out volume as well. My line out volume is very low, I have to put it to about 50 percent to match what would be the 20-30 percent level of my old HTC Touch (Touch 1 to HD2 - quite an upgrade, eh?? )

Categories

Resources