I have read a lot about the capacitive buttons on N1 being a little faulty.... it responds only when clicked on the upper half of the button... Just wondering if some developer here already found a fix for that...
If not, then is this a hardware limitation or some software glitch?
I think it's a hardware limitation. Once you get used to it it's just fine, but I agree it bothers me sometimes to have to touch it twice.
Some ROMs keep adding and removing the capacitive fix.
I dont see a problem.
You have to accept that they are different buttons.
-> On the screen I tab softly..
-> The cap.buttons, I hold my finger... (never tab it)
When you forget this, you tab on them like on your screen icons and you got to tab more times and start worrying about them...
I believe the capacitive button bug was fixed with google official OTA update.
I clearly had it before (had to hit on the upper part of the buttons) and now it's gone since the update
You can fix it? Mine is still like before.
waanz said:
I believe the capacitive button bug was fixed with google official OTA update.
I clearly had it before (had to hit on the upper part of the buttons) and now it's gone since the update
Click to expand...
Click to collapse
are you serious ???
Yea mine are fixed too on cyan's latest.
faraz1992 said:
I have read a lot about the capacitive buttons on N1 being a little faulty.... it responds only when clicked on the upper half of the button... Just wondering if some developer here already found a fix for that...
If not, then is this a hardware limitation or some software glitch?
Click to expand...
Click to collapse
They work fine if you just aim a tad high on the button. You adjust quickly.
What about the "area expansion fix"??
I have just upgraded to 2.2.. It still has problems with only the top half of the soft buttons being sensitive. I have also noticed that unless I'm holding the phone or touching the metal casing the buttons don't really work at all. It seems like a hardware issue. Although I do have thick skin from playing the guitar and rockclimbing. So I'm probably not as capacitive as the avarage user. Just wondering if anyone else has the same problems or even a fix?
Yeah I have to hit the upper part of the button as well. I would be interested in finding a fix for this too....
I'm running the stock OTA 2.2.1 rom right now if that helps any.
There is no fix, and the problem exists for all N1s ever produced. Hit the buttons on their top side.
I disagree, I hit mine bang on the graphic. Originally I did have to use the top but an update did fix it.
yeah there is no software fix for this its a hardware issue, i have to press mine on the top half, its never really bothered me though because most of the time i use my thumb and its so large it never misses the buttons hehe
i'd be curious to know though if the ones claiming that its fixed on their N1's how old their N1's are the newer ones may have a different touchscreen that had this issue fixed if its even possible to fix, if you look at the width of the screen border at the sides that is about equal to distance of the dead zone at the bottom of the glass so my guess is its by design and they may not have even been able to make that area of the glass touch sensitive due to how close to the edge of the glass it is
Rusty! said:
I disagree, I hit mine bang on the graphic. Originally I did have to use the top but an update did fix it.
Click to expand...
Click to collapse
try to press them at the lower half only pressing on the graphic works fine on my N1 most of the time, pressing right above the graphic always works. if i try with my index finger to press the lower part of any of the graphics it never works.
Anyone on cyanogen vouch for it being a software issue.
It's not software. I've had 2 N1's, and both do this.
I've disassembled one of the N1's about 10 times, and I've seen the under-side of those capacitive buttons. The part that detects the finger is really small. Probably 1cmx1cm box. And it's naturally placed a tad bit above the actual icon on the capacitive button. Just hit the button with your entire finger, not just the tip, and it will be fine.
Or keep crying about it. It's not ever going to be fixed. It's the way the phone was manufactured.
Frito11 said:
try to press them at the lower half only pressing on the graphic works fine on my N1 most of the time, pressing right above the graphic always works. if i try with my index finger to press the lower part of any of the graphics it never works.
Click to expand...
Click to collapse
Yeah lower portion is no-go, but dead center is bang on each time.
Rusty! said:
Yeah lower portion is no-go, but dead center is bang on each time.
Click to expand...
Click to collapse
Same here no problem at all on the graphic
Sent from my Nexus One using XDA App
Hey all.
I've tried to search from internet if somebody has the same problem as I do with my Galaxy S but I could not find anything. Seems that my Screen is loose from the right side of the screen. If i press gently the screen from the right middle it bends and makes this clicking sound. I haven't dropped or hit my device and it seems that this screen movement is getting worse all the time.
Has anyone else had any build quality problem or am I just unlucky?
I think is an issue covered by the warranty.
Go to the dealer and change it. Fast.
If it clicks probably it has something that is pressing on it.
you could find your self in the position to crack it.
Since a few weeks ago, my UP volume rocker has becoming less responsive and to make it work i have to press hard as hell.
Does anyone have the same problem?
Sent from my HTC Desire HD using Tapatalk
No problems here on my launch day model, although the placement and contouring of said buttons does annoy the hell out of me at times.
my volume rocker broke.. it didnt fell from me.. with normal use of the buttons.. i could see that it was just attached to the phone by some sticky rubberized material.. called htc.. they said they wud charge me for the repair even though im in warrenty but thats not for hardware.. so i purposly bricked ma phone to an extent that it wouldnt even switch on.. and sent for repair.. im been sent a replacement now
I notice if I put the phone right in front of me that the top button is a little bit inside ._.
I have a generic case that I bought at Radio Shack that seems to cause problems with responsiveness of the buttons if the phone isn't seated quite right in the case. If you use a case, you may want to try readjusting it.
I have recently been having a very similar issue with my volume down button.
In my case it was due to a tiny amount of dirt that got under the rocker ( or so I assume ).
I didn't have any compressed air to hand at the time so I just blew really hard into the gap around the side of the rocker, problem solved.
Give it a try!
J
First off I want to start by saying that this is potentially the best piece of technology I have ever bought. I am in LOVE with the flexibility of Android (brand new iOS switch over) and the raw power and hardware of the N3.
I bought this beast a couple of days ago and I instantly noticed that the home button was a bit wiggly if I tried hard to make it wiggle. Needless to say I ran to the web and found that may others have been having the same issue but its not a deal breaker in any way. I have come to terms with it and it no longer bothers me.
What I also noticed was that the volume buttons are quite loose and shake quite a bit if I move them around with my finger. I can also hear them rattling a little bit if I shake the phone and if it vibrates there is a slight sound. Is this also standard with all N3's or are my volume rockers a one off case?
I am under a replacement warranty and getting a new piece should be no issue, but if this volume issue is a common one then I wont bother as everything else is working perfectly and I don't want to risk running into different problems with another N3.
floko127 said:
First off I want to start by saying that this is potentially the best piece of technology I have ever bought. I am in LOVE with the flexibility of Android (brand new iOS switch over) and the raw power and hardware of the N3.
I bought this beast a couple of days ago and I instantly noticed that the home button was a bit wiggly if I tried hard to make it wiggle. Needless to say I ran to the web and found that may others have been having the same issue but its not a deal breaker in any way. I have come to terms with it and it no longer bothers me.
What I also noticed was that the volume buttons are quite loose and shake quite a bit if I move them around with my finger. I can also hear them rattling a little bit if I shake the phone and if it vibrates there is a slight sound. Is this also standard with all N3's or are my volume rockers a one off case?
I am under a replacement warranty and getting a new piece should be no issue, but if this volume issue is a common one then I wont bother as everything else is working perfectly and I don't want to risk running into different problems with another N3.
Click to expand...
Click to collapse
Not seen any issues regarding Volume buttons being dodgy, only the home button. (only a small percentage tho) - Guess you just got a lemon unit, it does happen from time to time with any hardware.
I've got no problems on the home button or the volume buttons or the power button. Once you put a case on it you won't notice if it's just minor. But if it's bad, is get it changed. ..?
Sent from my SM-N9005 using Tapatalk
Now that more people have gotten their phones, can you guys chime in and say whether you have a lose volume rocker.
My volume rocker is lose and makes a little rattle when I tap it with my finger, I can also move it side to side. My power button is perfectly solid however.
I have a 6P
My first one had this issue, (along the with a raised back panel and some cosmetic marks on the bezel).
Second one was fine though. Pity I had to RMA that one as it got stuck in the official Folio case.
Third one was fine too.
No mine doesn't do this. Solid volume rocker and with good fitment. My power button however, DOES sound off every now and again. Can't always reproduce it.
Mine is fine. Just as I would expect build quality wise and power button is also fine.
Yes I also have the raised back panel as well.
Google is now claiming that lose buttons are not a good enough reason to RMA devices and that it's simple offset tolerances that should be accepted by the customer.
They know about the issue and are trying to sell it off by saying it is acceptable to have rattling buttons because they allow tolerances in the build.
This is a simple lie by the way because something that's 1.5 millimeters wide as these buttons are, would NEVER have a tolerance of error to nearly over half of millimeter. And even if the tolerance was really that high, it would be made up by rubber inserts and mounting brackets tightly aligning and holding things in place