hello gyes!
i'm in great jeopardy...............
spent 2 days searching-> only 1 thing & its-> how to install a 3 button download mode on my sgs gt i9000.
I crashed my froyo 2.2.1 while debranding it.so i revert it back to eclair 2.1 but now kies won't recognise it for updates
i downloaded every thing i needed-> .pit file\gingerbread file\odin3 v 1.82\the adb a k a sdk what ever.(sdk manager)....even played in commandpromt.1 click root\unroot. decorder update with kies
but all seems worthless unless i don't get the 3 button download mode
i tried all XDA forums-tutorials.....but nothing to come in way of sucess.
so please give some suggestions & links that could save my babe
You really should try to get download mode working, as it will make your life MUCH easier, but if all you need download-mode for is flashing some stock images which Odin, you can force your phone into download mode using ADB.
You said you've installed the SDK, so I'll take your word for it. What you need to do is the following:
1. Locate adb.exe. Open windows explorer, point it to C: and search for adb.exe.
2. Connect your phone with USB Debugging enabled. This setting needs to be enabled before you connect it to your PC (Settings/Applications/Development)
3. If this is the first time you are using USB debugging, you might have to wait for drivers to install.
4. Open a command prompt
5. Change the directory to the one where adb was found in step 1.
6. Type "adb devices" and press enter in your command prompt.
7. Verify that adb actually runs and that your device is listed.
8. Type "adb reboot download".
Your phone should now be in download mode and you can flash things trough Odin.
Beware though: Without the 3-button download mode accessible, you will have much fewer options for recovering your phone later should you mess anything up in the flashing process.
Hope this helps.
Try out the home made JIG
As explaind in thread 819551 if you have a soldering iron, you can put together a micro usb jig to force the phone into download mode.
Yuotube has some clips to show you how to make it. Looks simple, though I haven't tried it personally.
Hello all,
I have big problems with my L7 P700.
I rooted it two month ago, even that time I was stuck at yellow emergency mode, but using some instruction (disable LG modem) I was able to boot phone again.
Today I believe I have totally different problem.
What I did, I found stock firmware 4.1.2 and LG drivers, I installed it. Restarted phone and pressed Volume UP + Power. Phone went to yellow emergency mode, ok... Then I tried to use KDZ_FW_EN, phone was not seen. I restarted it and it booted ok to system. Turned of again, went to emergency mode than I opened KDZ_FW_EN again. I tried to read phone information, the program chrashed. I opened it again and tried to flash firmware. There were errors, and I am pretty sure phone wasn't even properly connected to PC!
So if you don't understand me I will repeat again.
I went to emergency mode WITHOUT USB DEBUGGING ON (I disabled it one day, I remember, this time I forget to turn it on). So Under device manager I see only USB composite device and LG Modem, disabling modem isn't a fix (like two month ago when I rooted). This time I can't use any of flashing tools cos I am not in debugging mode =(. The only thing I don't understand is how I was able to destroy my phone if it wasn't even flashing it (port number was -1, some wparam 100-1000 errors, i closed program in the middle but it wasn flashing if I wasn't in debug mode?)
Phone is rooted and stuck at emergency mode, without usb debugging and hard reset bring the emergency on (BOTH VOLUME BUTTONS + MENU)
Anyone?
Yes, I had the same problem a few months ago. Try install firmware stock V20D without battery and then connect phone via cable USB to PC but turning on Emergency Mode. Next, 3GQCT and CS EMERGENCY. Of course you can change port USB. Try reinstall KDZ and drivers. If you have Windows Vista then that's the problem. I'm sure that this situation will be resolve.
Ok I made it!
Don't know how, maybe it was working all the time. I've seen that phone is connected thru Ports (COM & LPT). Opened KDZ again, even that the install for firmware usb driver failed. I again tried to flash, again there were errors (wparam,...) and port -1?, I just left phone connected, yesterday I unplugged it! After 10minutes phone restarted and here is 4.1.2 and all the data is here!
Don't know what I was doing =)
Thread can be closed now!
Great!
So I have bought a L7 and when I have it the phone is not working, the seller doesnt want to take my money back so I need help with this :S!
No appears to do anything when connected to charger
No led
No vibrates
No emergency mode
When I connect it to my PC it recognizes it as QHSUSB_DLOAD, but neither KDZ or LG update program recognize it :S!!
Someone know how to reinstall OS I think is software issue but I dont know how fix it
Thanks!
Try following the instruction I got from a website.
What is 'qhsusb_dolad' ?It is the situation when you can't boot into your phone,recovery mode and any other visible interface. When you connected your phone to the PC, the LED will flash and your PC will show that they were searching for the drivers needed(win7/8) but they couldn't find .......If it is commom for you to remove the battery when the phone did not shutdown completely or when you ran into 'No-Response' , as time goes by ,it will be inevitable that you come across the 'QHSUSB_DLOAD' situation .
But from now on ,you needn't worry about that for I have found a way out.
Tools needed:
Hardware: A PC running XP and higher (win7/8 recommended) and your usb cable
Software : MIflash and MIAssistent and a certain mi update rom(It is a *.exe file---fastboot file)
Steps :
1. Install the first two softwares described above(Run as administrator) in your PC (You need to disable the enforcement of digital signature while on win8 in the advanced startup (press 7 or F7)
2.Boot into fastboot mode(you just need to do with your two buttons and usually you cann't see the interface for your screen just won't show in this situation) before connecting to PC
3.Connect you MI2/S to your PC via the usb cable and the pc will recongnise it in the device manager panel(if not, update its driver in the unknown device---qhsusb_dload)
4.Open the miflash and click fresh to load your phone's serial number
5.Flash the update rom(the self-extracted-to folder) into your phone and reboot .
Explanations:
Miassistant contains the 'qhsusb_dload' driver for any phone and it enables the PC(Miflash) to recongnise your CPU serial which is the key part of updating by wire.
Tips:
Try this with your other phone, I believe it will work ,too.
I'm supposed to just copy/paste the link.. but the protocol won't let me since I still don't have more than 10 posts. I just want to help. Try this
here is the guide to unbrick your phone if you got it hard bricked (no fast boot mode)
Disclaimer: do this on your own risk. I am not responsible if you..blah blah blah well what worse you can do you have already bricked your phone so pull your pants together and try this
USE only XP 32 bit (win 7 32 bit may work) nothing else works...
this method is to revive the device via accessing the qcom soc in bare board mode so that you can upgrade the firmware on device
1) download the flash tools given in the forum
2) download drivers and image of firmware (16gb or 32 gb) depending on your phone version (1.8 gb rar)
3) install everything
4) plug your phone via usb cable
if device manager shows
"qulacom HS-USB qloader 9008" under com port your phone is hardbricked and ready to go
if it shows more than 1 device under com port (gionee NEMA /GIONEE digonostics)your device is soft bricked and needs to follow steps for soft bricked device do not follow this guide any further
else if nothing happens hold power button for a long time (so as to make sure your phone is switched off) and try plugging in your device
5) open GNQC_download.exe and select path to bp-image folder in frimware image
6) AP image path is automatically selected (parent folder of bp-image folder)
7) select name as WBW 8901 or GBW 8900A (depending upon english or chinese version of flash tool)
8) select mode as emergence mode (bp + ap)
9)while qloader 9008 device is showing in mini window click download
10) after successful download phone will reboot in storage mode
11) if antivirus prompts for permission allow it
12) let it continue to download the files onto your device
after completion you can click tools and select which img files to download (let it be default)
click ok to save and now you can upgrade the firmware...
FAQ
Q) gnqc download doesn't works gives error "application failed to start"
A) install VC++ 2005 redistributeble SP1 ATL security upgrade
Q) receive incorrect parameter error.
A) you are using Chinese flash tool so make sure your copy of windows supports Chinese change local settings in control panel
Q) error in gnqc bp_image file doesnt exist
A) again remove Chinese characters from name of image folder
Q) phone is not detected
A) let it sit and drain the battery in 1-2 days now plug via usb cable
Q) phone is detected as usb hid device instead of com port
A) facing same problem fond no solution till yet
dhirajranger said:
here is the guide to unbrick your phone if you got it hard bricked (no fast boot mode)
Disclaimer: do this on your own risk. I am not responsible if you..blah blah blah well what worse you can do you have already bricked your phone so pull your pants together and try this
USE only XP 32 bit (win 7 32 bit may work) nothing else works...
this method is to revive the device via accessing the qcom soc in bare board mode so that you can upgrade the firmware on device
1) download the flash tools given in the forum
2) download drivers and image of firmware (16gb or 32 gb) depending on your phone version (1.8 gb rar)
3) install everything
4) plug your phone via usb cable
if device manager shows
"qulacom HS-USB qloader 9008" under com port your phone is hardbricked and ready to go
if it shows more than 1 device under com port (gionee NEMA /GIONEE digonostics)your device is soft bricked and needs to follow steps for soft bricked device do not follow this guide any further
else if nothing happens hold power button for a long time (so as to make sure your phone is switched off) and try plugging in your device
5) open GNQC_download.exe and select path to bp-image folder in frimware image
6) AP image path is automatically selected (parent folder of bp-image folder)
7) select name as WBW 8901 or GBW 8900A (depending upon english or chinese version of flash tool)
8) select mode as emergence mode (bp + ap)
9)while qloader 9008 device is showing in mini window click download
10) after successful download phone will reboot in storage mode
11) if antivirus prompts for permission allow it
12) let it continue to download the files onto your device
after completion you can click tools and select which img files to download (let it be default)
click ok to save and now you can upgrade the firmware...
FAQ
Q) gnqc download doesn't works gives error "application failed to start"
A) install VC++ 2005 redistributeble SP1 ATL security upgrade
Q) receive incorrect parameter error.
A) you are using Chinese flash tool so make sure your copy of windows supports Chinese change local settings in control panel
Q) error in gnqc bp_image file doesnt exist
A) again remove Chinese characters from name of image folder
Q) phone is not detected
A) let it sit and drain the battery in 1-2 days now plug via usb cable
Q) phone is detected as usb hid device instead of com port
A) facing same problem fond no solution till yet
Click to expand...
Click to collapse
I can't see com port? What to do?
kieudaigia said:
I can't see com port? What to do?
Click to expand...
Click to collapse
can you boot into fastboot (red gionee logo)
try power + vol down when phone is off
try vol up + vol down and plug usb when phone is switched off
dhirajranger said:
can you boot into fastboot (red gionee logo)
try power + vol down when phone is off
try vol up + vol down and plug usb when phone is switched off
Click to expand...
Click to collapse
I follow the instructions, but still no appearance com port
Try power + vol up khi phone is off, then on "android system recovery (3e)
kieudaigia said:
I follow the instructions, but still no appearance com port
Try power + vol up khi phone is off, then on "android system recovery (3e)
Click to expand...
Click to collapse
if you can access recovery it means your phone is not hard bricked....
also did you installed all drivers on your xp machine?
dhirajranger said:
here is the guide to unbrick your phone if you got it hard bricked (no fast boot mode)
Disclaimer: do this on your own risk. I am not responsible if you..blah blah blah well what worse you can do you have already bricked your phone so pull your pants together and try this
USE only XP 32 bit (win 7 32 bit may work) nothing else works...
this method is to revive the device via accessing the qcom soc in bare board mode so that you can upgrade the firmware on device
1) download the flash tools given in the forum
2) download drivers and image of firmware (16gb or 32 gb) depending on your phone version (1.8 gb rar)
3) install everything
4) plug your phone via usb cable
if device manager shows
"qulacom HS-USB qloader 9008" under com port your phone is hardbricked and ready to go
if it shows more than 1 device under com port (gionee NEMA /GIONEE digonostics)your device is soft bricked and needs to follow steps for soft bricked device do not follow this guide any further
else if nothing happens hold power button for a long time (so as to make sure your phone is switched off) and try plugging in your device
5) open GNQC_download.exe and select path to bp-image folder in frimware image
6) AP image path is automatically selected (parent folder of bp-image folder)
7) select name as WBW 8901 or GBW 8900A (depending upon english or chinese version of flash tool)
8) select mode as emergence mode (bp + ap)
9)while qloader 9008 device is showing in mini window click download
10) after successful download phone will reboot in storage mode
11) if antivirus prompts for permission allow it
12) let it continue to download the files onto your device
after completion you can click tools and select which img files to download (let it be default)
click ok to save and now you can upgrade the firmware...
FAQ
Q) gnqc download doesn't works gives error "application failed to start"
A) install VC++ 2005 redistributeble SP1 ATL security upgrade
Q) receive incorrect parameter error.
A) you are using Chinese flash tool so make sure your copy of windows supports Chinese change local settings in control panel
Q) error in gnqc bp_image file doesnt exist
A) again remove Chinese characters from name of image folder
Q) phone is not detected
A) let it sit and drain the battery in 1-2 days now plug via usb cable
Q) phone is detected as usb hid device instead of com port
A) facing same problem fond no solution till yet
Click to expand...
Click to collapse
if its soft brick.. how to solve... help me plz
hooney_zam said:
if its soft brick.. how to solve... help me plz
Click to expand...
Click to collapse
if you can get into fastboot just install twrp/cwm
and install stock rom back
Please Help!!
dhirajranger said:
here is the guide to unbrick your phone if you got it hard bricked (no fast boot mode)
Disclaimer: do this on your own risk. I am not responsible if you..blah blah blah well what worse you can do you have already bricked your phone so pull your pants together and try this
USE only XP 32 bit (win 7 32 bit may work) nothing else works...
this method is to revive the device via accessing the qcom soc in bare board mode so that you can upgrade the firmware on device
1) download the flash tools given in the forum
2) download drivers and image of firmware (16gb or 32 gb) depending on your phone version (1.8 gb rar)
3) install everything
4) plug your phone via usb cable
if device manager shows
"qulacom HS-USB qloader 9008" under com port your phone is hardbricked and ready to go
if it shows more than 1 device under com port (gionee NEMA /GIONEE digonostics)your device is soft bricked and needs to follow steps for soft bricked device do not follow this guide any further
else if nothing happens hold power button for a long time (so as to make sure your phone is switched off) and try plugging in your device
5) open GNQC_download.exe and select path to bp-image folder in frimware image
6) AP image path is automatically selected (parent folder of bp-image folder)
7) select name as WBW 8901 or GBW 8900A (depending upon english or chinese version of flash tool)
8) select mode as emergence mode (bp + ap)
9)while qloader 9008 device is showing in mini window click download
10) after successful download phone will reboot in storage mode
11) if antivirus prompts for permission allow it
12) let it continue to download the files onto your device
after completion you can click tools and select which img files to download (let it be default)
click ok to save and now you can upgrade the firmware...
FAQ
Q) gnqc download doesn't works gives error "application failed to start"
A) install VC++ 2005 redistributeble SP1 ATL security upgrade
Q) receive incorrect parameter error.
A) you are using Chinese flash tool so make sure your copy of windows supports Chinese change local settings in control panel
Q) error in gnqc bp_image file doesnt exist
A) again remove Chinese characters from name of image folder
Q) phone is not detected
A) let it sit and drain the battery in 1-2 days now plug via usb cable
Q) phone is detected as usb hid device instead of com port
A) facing same problem fond no solution till yet
Click to expand...
Click to collapse
Okay finally i have been able to get everything ready as in both drivers and firmware file. but now the issue is my phone is now detecting as a USB HID DEVICE instead of com port. and from your post, u said that is a problem u were also facing. i will like to ask if you have a fix or solution to that problem. because i am facing this same issue and now it seems i can't fix my phone.:crying::crying::crying::crying::crying:
Please Help!!
steps parku said:
okay finally i have been able to get everything ready as in both drivers and firmware file. But now the issue is my phone is now detecting as a usb hid device instead of com port. And from your post, u said that is a problem u were also facing. I will like to ask if you have a fix or solution to that problem. Because i am facing this same issue and now it seems i can't fix my phone.:crying::crying::crying::crying::crying:
Please help!!
Click to expand...
Click to collapse
where i can get firmware file ?
Firmware + Flash ware, all of Gione
andresplata94 said:
where i can get firmware file ?
Click to expand...
Click to collapse
Download the firmware file from the link below, u can use google translate to get the interpretation of the website. Make sure u download the files meant for Gionee elife E7, if that is really ur device. however i am still stuck at my device showing as HID Device and i will be deeply grateful if anyone here has a fix to this issue.
wwwdotelifedotcom/thread-22957-1-7dothtml[/url]
i can't post links here, so pleae, copy and paste this into your browser, and replace the 'dot' with '.'
Steps Parku said:
Download the firmware file from the link below, u can use google translate to get the interpretation of the website. Make sure u download the files meant for Gionee elife E7, if that is really ur device. however i am still stuck at my device showing as HID Device and i will be deeply grateful if anyone here has a fix to this issue.
wwwdotelifedotcom/thread-22957-1-7dothtml[/url]
i can't post links here, so pleae, copy and paste this into your browser, and replace the 'dot' with '.'
Click to expand...
Click to collapse
nice i get files now, but anyway this toturial doesnt work for me, what happends next ? :/
help me
Sofbrick ?
dhirajranger said:
here is the guide to unbrick your phone if you got it hard bricked (no fast boot mode)
Disclaimer: do this on your own risk. I am not responsible if you..blah blah blah well what worse you can do you have already bricked your phone so pull your pants together and try this
USE only XP 32 bit (win 7 32 bit may work) nothing else works...
this method is to revive the device via accessing the qcom soc in bare board mode so that you can upgrade the firmware on device
1) download the flash tools given in the forum
2) download drivers and image of firmware (16gb or 32 gb) depending on your phone version (1.8 gb rar)
3) install everything
4) plug your phone via usb cable
if device manager shows
"qulacom HS-USB qloader 9008" under com port your phone is hardbricked and ready to go
if it shows more than 1 device under com port (gionee NEMA /GIONEE digonostics)your device is soft bricked and needs to follow steps for soft bricked device do not follow this guide any further
else if nothing happens hold power button for a long time (so as to make sure your phone is switched off) and try plugging in your device
5) open GNQC_download.exe and select path to bp-image folder in frimware image
6) AP image path is automatically selected (parent folder of bp-image folder)
7) select name as WBW 8901 or GBW 8900A (depending upon english or chinese version of flash tool)
8) select mode as emergence mode (bp + ap)
9)while qloader 9008 device is showing in mini window click download
10) after successful download phone will reboot in storage mode
11) if antivirus prompts for permission allow it
12) let it continue to download the files onto your device
after completion you can click tools and select which img files to download (let it be default)
click ok to save and now you can upgrade the firmware...
FAQ
Q) gnqc download doesn't works gives error "application failed to start"
A) install VC++ 2005 redistributeble SP1 ATL security upgrade
Q) receive incorrect parameter error.
A) you are using Chinese flash tool so make sure your copy of windows supports Chinese change local settings in control panel
Q) error in gnqc bp_image file doesnt exist
A) again remove Chinese characters from name of image folder
Q) phone is not detected
A) let it sit and drain the battery in 1-2 days now plug via usb cable
Q) phone is detected as usb hid device instead of com port
A) facing same problem fond no solution till yet
Click to expand...
Click to collapse
Hey man, how are u ?
i have a serius problem with my device " blu life pure xl" i installed norios room on my device and now is bricked
i try install back my old room froom recovery and nothing happend
too i try restore a backup ( i have a this backup some time ago) and again nothing happends
i dont know what happend, but always when i turn on my device show gionne smarthphone logo and it is bootloop
u can help me ?
i dont know how solve it ?
thank you !!!!
---------- Post added at 04:54 AM ---------- Previous post was at 04:10 AM ----------
dhirajranger said:
if you can get into fastboot just install twrp/cwm
and install stock rom back
Click to expand...
Click to collapse
even installed room back i cant solve this soft brick, what now ? :c
---------- Post added at 05:01 AM ---------- Previous post was at 04:54 AM ----------
when i did click on dowload button its show "open com port fail, please check if other program are using the COM por[QDloader] ! ! ! "
what mean it, how i can solve it ?
my phone is stuck in the white gionee logo.
dhirajranger said:
if you can get into fastboot just install twrp/cwm
and install stock rom back
Click to expand...
Click to collapse
hi plz help my phone is stuck in the white gionee logo wont boot after that.its not even detecting in the system could you please tell me a step by step procedure on how to install cwm or any other recovery and flash the stock rom...
plz help needed.
dhirajranger said:
here is the guide to unbrick your phone if you got it hard bricked (no fast boot mode)
Disclaimer: do this on your own risk. I am not responsible if you..blah blah blah well what worse you can do you have already bricked your phone so pull your pants together and try this
USE only XP 32 bit (win 7 32 bit may work) nothing else works...
this method is to revive the device via accessing the qcom soc in bare board mode so that you can upgrade the firmware on device
1) download the flash tools given in the forum
2) download drivers and image of firmware (16gb or 32 gb) depending on your phone version (1.8 gb rar)
3) install everything
4) plug your phone via usb cable
if device manager shows
"qulacom HS-USB qloader 9008" under com port your phone is hardbricked and ready to go
if it shows more than 1 device under com port (gionee NEMA /GIONEE digonostics)your device is soft bricked and needs to follow steps for soft bricked device do not follow this guide any further
else if nothing happens hold power button for a long time (so as to make sure your phone is switched off) and try plugging in your device
5) open GNQC_download.exe and select path to bp-image folder in frimware image
6) AP image path is automatically selected (parent folder of bp-image folder)
7) select name as WBW 8901 or GBW 8900A (depending upon english or chinese version of flash tool)
8) select mode as emergence mode (bp + ap)
9)while qloader 9008 device is showing in mini window click download
10) after successful download phone will reboot in storage mode
11) if antivirus prompts for permission allow it
12) let it continue to download the files onto your device
after completion you can click tools and select which img files to download (let it be default)
click ok to save and now you can upgrade the firmware...
FAQ
Q) gnqc download doesn't works gives error "application failed to start"
A) install VC++ 2005 redistributeble SP1 ATL security upgrade
Q) receive incorrect parameter error.
A) you are using Chinese flash tool so make sure your copy of windows supports Chinese change local settings in control panel
Q) error in gnqc bp_image file doesnt exist
A) again remove Chinese characters from name of image folder
Q) phone is not detected
A) let it sit and drain the battery in 1-2 days now plug via usb cable
Q) phone is detected as usb hid device instead of com port
A) facing same problem fond no solution till yet
Click to expand...
Click to collapse
Help me, error "Enter EDL mode fail, please press power on( or power off) to update port and try again" How do i do?
kieudaigia said:
Help me, error "Enter EDL mode fail, please press power on( or power off) to update port and try again" How do i do?
Click to expand...
Click to collapse
Facing same problem
EDL MODE FAIL
What to do
Guys Please Help
shivam2702 said:
Click to expand...
Click to collapse
When you connect the phone to the PC, does it loader any driver? Use Device Manager to check...
If it loads the QLoader driver, use the "Emergency Mode" in GNQC 1.6.9.0.
If no driver loads, disconnect the phone and press the power button for 30 secs and try again.
If this also fails, wait a day for the device discharge, press the power button for 30 secs and try again...
Let me know how it went...
RSGI_PT said:
When you connect the phone to the PC, does it loader any driver? Use Device Manager to check...
If it loads the QLoader driver, use the "Emergency Mode" in GNQC 1.6.9.0.
If no driver loads, disconnect the phone and press the power button for 30 secs and try again.
If this also fails, wait a day for the device discharge, press the power button for 30 secs and try again...
Let me know how it went...
Click to expand...
Click to collapse
This Is my error looks like
RSGI_PT said:
When you connect the phone to the PC, does it loader any driver? Use Device Manager to check...
If it loads the QLoader driver, use the "Emergency Mode" in GNQC 1.6.9.0.
If no driver loads, disconnect the phone and press the power button for 30 secs and try again.
If this also fails, wait a day for the device discharge, press the power button for 30 secs and try again...
Let me know how it went...
Click to expand...
Click to collapse
Help Buddy Please Reply
shivam2702 said:
This Is my error looks like
Click to expand...
Click to collapse
Try to flash again.
If that messege apears again just press the power button of the phone for a few secs without disconnecting from the PC.
The download should begin. If not change the Mode to Normal and press the power button for a few secs.
Dont disconnect the phone from the PC, cause that messege apears because the GNQC is unable to confirm the state of the phone. By pressing the power button you are refreshing the connecting and the GNQC should detect the state of the phone.
Also you can try this using another USB port on your PC.
Feed back me
Hi all,
My phone is bricked with following syptoms:
1) Not being recognised in download mode
2) Adb without root acess (unable to push files)
3) No recovery
Detailed problems
I have a (Korean) Lg G2 (F320s) and its stuck on bootloop. It goes into download mode with Vol + with plugging into computer but the computer doesnt recognise it as attached...no sound, nothing in device manager and no found by Lg Flashtools or Kdz updater.
When simply turning on i connect it to the PC it shows as an ADB interface device and i have ADB but no root authorization (my phone was rooted before).
Lastly when i try to enter recovery it just flashes a couple of times and goes black...back light still on. In this mode when i connect it to PC it shows up several drives and phone comes up as Qhsusb_bulk device. I read a thread using UBUNTU to repair this but it wont work for me....the PC just hangs up and Ubuntu is unable to mount the drives (Even after the settings from Dconf Editor).
Please help i have been stuck for days
Please help
Please help ppl... is there a possible solution to the problem..?? JTAG maybe??