Database Users

Atrix is Bricked. Halp!

I've been through the forums all day trying to recover my Atrix. I'm now creating a post to see if I can get some fresh ideas. The LED just flashing red and the USB Enumeration says: Cold-booting Linux Reading ODM fuse: 1.
Any help would be great. The phone doesn't get past the Motorola Dual Core screen. Thanks!

Weese said:
I've been through the forums all day trying to recover my Atrix. I'm now creating a post to see if I can get some fresh ideas. The LED just flashing red and the USB Enumeration says: Cold-booting Linux Reading ODM fuse: 1.
Any help would be great. The phone doesn't get past the Motorola Dual Core screen. Thanks!
Click to expand...
Click to collapse
Try booting into RSD mode and flash back to 4.1.26.
Should find what you need here:
[Guide]Motorola Atrix Complete AT&T Rooting and Flashing Guide

CaelanT said:
Try booting into RSD mode and flash back to 4.1.26.
Should find what you need here:
[Guide]Motorola Atrix Complete AT&T Rooting and Flashing Guide
Click to expand...
Click to collapse
Thanks for the reply!! I will download the SBF and try that. I had one downloaded but it wouldn't work. I will try this one and report back.

RSD fails the flashing process. Are there any details I can post that will help?

Weese said:
RSD fails the flashing process. Are there any details I can post that will help?
Click to expand...
Click to collapse
Which version of RSD Lite?
Sent from WinBorg 4G using XDA Premium App

It's 5.0. I tried a different computer as per something I read. It finished however it's still just blinking the red light at me.

What were u doing when it hit the fan?
Sent from my MB860 using XDA App

If all fails...try and get your phone replaced under warranty (Don't tell them you did ANYTHING...just tell them you turned it off before you went to bed and when you turned it back on in the morning it did this) this kind of thing has worked for me before.. good luck

dubyajaysmith said:
What were u doing when it hit the fan?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Nothing strange at all. I was replying to texts from last night. Put it in my pocket and next time I pulled it out it had rebooted.

roharia said:
If all fails...try and get your phone replaced under warranty (Don't tell them you did ANYTHING...just tell them you turned it off before you went to bed and when you turned it back on in the morning it did this) this kind of thing has worked for me before.. good luck
Click to expand...
Click to collapse
They are sending me a replacement but it's going to be a few days. Plus I hate letting technology get the best of me.

Just be careful with the next one good luck man

[Q] need help! tried to sbf and im stuck on the "M" logo

i tried to sbf from gingerbread back to froyo using rsd lite and nw my phones stuck on the m logo, i dont know what to do i been readin through the forums but i cant seem to find anything that works please someone help me!!!

chip0 said:
i tried to sbf from gingerbread back to froyo using rsd lite and nw my phones stuck on the m logo, i dont know what to do i been readin through the forums but i cant seem to find anything that works please someone help me!!!
Click to expand...
Click to collapse
Did you do the full sbf?
Sent from my DROIDX using XDA App

ya i did the full sbf, SHADO_X6_2.3.34_SYSTEM-ONLY.sbf thats the file i downloaded...

chip0 said:
ya i did the full sbf, SHADO_X6_2.3.34_SYSTEM-ONLY.sbf thats the file i downloaded...
Click to expand...
Click to collapse
thats not the full one. thats the system only one. use full one here http://www.mydroidworld.com/forums/droid-x-discussion/6367-new-full-sbf-droid-x-2-3-340-a.html
dont forget to do a factory reset after doing the sbf

it said failed flashing process error sending ram download for bootloader

chip0 said:
it said failed flashing process error sending ram download for bootloader
Click to expand...
Click to collapse
Now do the system only and you should be good
Sent from my DROIDX using XDA App

it said the same thing, it faild, n it said error getting subscriber info

chip0 said:
it said the same thing, it faild, n it said error getting subscriber info
Click to expand...
Click to collapse
That's weird...I usually do the Full Sbf then the system only because the Full fails....can you get into recovery?
Sent from my DROIDX using XDA App

u mean by pressing the power button n the menu button? cuz when i do that it just shows a android guy n a exclamation mark inside a triangle. im not sure but i think it keeps failing because my battery is low so im charging it n im going to try again in a lil bit should i do the full first again then the system only? n if u have any other ideas let me know lol...looks like its gunna be a LONG night for me hahaha

chip0 said:
u mean by pressing the power button n the menu button? cuz when i do that it just shows a android guy n a exclamation mark inside a triangle. im not sure but i think it keeps failing because my battery is low so im charging it n im going to try again in a lil bit should i do the full first again then the system only? n if u have any other ideas let me know lol...looks like its gunna be a LONG night for me hahaha
Click to expand...
Click to collapse
Ya and press the search button. Wipe data/factory reset and see what happens
Sent from my DROIDX using XDA App

now i cant even do that, no matter what i press it takes me to the boot loader

Flash the full again. If it fails, pop out the battery and flash the full again. It may tell you code corrupt, but it will allow you to flash it. It may also take 2-3 tries. I had the same issue flashing back, but it will take
Sent from my DROIDX using XDA Premium App

ok, doing it again as we speak lol

dude, THANK YOU! seriously u saved my life...can i buy u a beer? lol

No worries,its happened to me a few times. Just glad I could help
Sent from my DROIDX using XDA Premium App

how do you get pass the activate screen? Im not using vzw and i need to root the phone.

undertai said:
how do you get pass the activate screen? Im not using vzw and i need to root the phone.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=L5XjF6sPef4

this seems to be the same issue I'm having.. i just updated to GB yesterday and rooted my phone.. i am super novist at this so i have had a few issues the last couple days but anyway, my bootloader say 30.04 so i grabbed the SHADO_X6_2.3.34_SYSTEM-ONLY.sbf tried to flash using RSD lite and then my phone now shows the Red "M" logo... I'm kinda worried i downloaded the "Happy Holidays".sbf hoping that would work instead but RSD lite doesn't even allow me to start with that program.. so i saw earlier on this thread there was a different file to use.. i'm downloading that now but ultimately i would really like to get the Miui Rom working.. well actually ANY rom would be cool if someone see's this before i try to flash that file let me know otherwise I'll just re post my results.
---------- Post added at 06:22 PM ---------- Previous post was at 05:58 PM ----------
so now im super confused... both the holiday sbf and the one listed earlier wont even work in RSD lite.... and i'm still stuck at the Red M logo... what am i doing wrong?

Rhill051 said:
this seems to be the same issue I'm having.. i just updated to GB yesterday and rooted my phone.. i am super novist at this so i have had a few issues the last couple days but anyway, my bootloader say 30.04 so i grabbed the SHADO_X6_2.3.34_SYSTEM-ONLY.sbf tried to flash using RSD lite and then my phone now shows the Red "M" logo... I'm kinda worried i downloaded the "Happy Holidays".sbf hoping that would work instead but RSD lite doesn't even allow me to start with that program.. so i saw earlier on this thread there was a different file to use.. i'm downloading that now but ultimately i would really like to get the Miui Rom working.. well actually ANY rom would be cool if someone see's this before i try to flash that file let me know otherwise I'll just re post my results.
---------- Post added at 06:22 PM ---------- Previous post was at 05:58 PM ----------
so now im super confused... both the holiday sbf and the one listed earlier wont even work in RSD lite.... and i'm still stuck at the Red M logo... what am i doing wrong?
Click to expand...
Click to collapse
follow this guide http://rootzwiki.com/showthread.php?399-UPDATED-GUIDE-LINKS-DX-SBF-s

I followed your advice to the website and from there i found this link http://www.droidxforums.com/forum/droid-x-sbf/23638-linux-solution-your-windows-rsd-lite-problems.html It is a walk through on how to boot using linux and flashing your phone, it worked like a charm even after a few other attempts at using RSD lite that was the only method that worked i would highly recommend someone to use this method

RSD LITE not detecting phone

Ok so i was planning to flash my defy with the leaked 2.3.4 gingerbread but when it came time to connect it to the rsdlite, it wasn't detected. The drivers installed fine.
I followed this tutorial:
http://forum.xda-developers.com/showthread.php?p=14976942#post14976942
Things checked:
Bootloader was on when connected
Battery full
I tried multiple methods:
Running RSDLITE with safemode
running rsdlite admin access
installing rsdlite 4.9
installing rsdlite 5.3.1
installing motorola drivers 5.1
installing motorola drivers 5.2
So now i can't flash the shadow4.5.1-134fixed.sbf.
Doing this step:
4. Select “shadow4.5.1-134nandroid” and choose “System Only”
I can't load into my phone to access ClockworkMod Recovery to revert that.
So now when i boot up my phone it is stuck at the motorola symbol.
What i can do:
access bootloader
access recovery module

Pull out battery.
Reinsert battery while holding volume up key.
Phone should say ok to program.
Sent from my MB525 using XDA App

Red should detect then
Sent from my MB525 using XDA App

Tried that and RSDLITE still doesn't detect. I tried installing RSDLITE on a different laptop but same issue.

i have a feeling its because of the 64bit windows 7. Has anyone got it to work on other flavours of windows?

I'm having the same issue.. tried the pulling battery out and back in with volume up with no luck..

any solution?
i'm having the same problem
thanks

Any solution?
I have the same problem. Any help is appreciated. Thanks!

arulshoponline said:
Any solution?
I have the same problem. Any help is appreciated. Thanks!
Click to expand...
Click to collapse
just go to boot loader then connect phone to PC... RSd will detect it...
Sent from my MB526 using xda premium

nogoodusername said:
just go to boot loader then connect phone to PC... RSd will detect it...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Thanks for your reply. I was also trying to connect USB when phone is on boot loader. Even computer itself does not recognize the phone.

try using another version of rsd
Sent from my MB526 using xda premium

Yeah my solution was that i installed windows XP on the same laptop, installed the same version of rsd lite and it was detected. I don't think you have to do something that strenuous but you could try installing a different version of rsd lite. I think the latest one is 5.6 and it works in detecting my phone on windows 7 x64.

munky88 said:
Yeah my solution was that i installed windows XP on the same laptop, installed the same version of rsd lite and it was detected. I don't think you have to do something that strenuous but you could try installing a different version of rsd lite. I think the latest one is 5.6 and it works in detecting my phone on windows 7 x64.
Click to expand...
Click to collapse
Thanks for replies. I tried RSD lite 5.6
4.9
4.8
4.6
on windows7 x64. But no luck.
Not only RSD lite, even computer also does not detect the phone. I tried in my laptop also which is running windows7 x64. I will try it in XP also tomorrow.
---------- Post added at 10:17 PM ---------- Previous post was at 10:12 PM ----------
I tried re-installing driver 5.5.0 also.

Check if you have any belkin router software installed. I remember reading on some topic that, the USB monitor of that software was interfering with rsd lite
Sent from my MB526 using XDA

shadenight said:
Check if you have any belkin router software installed. I remember reading on some topic that, the USB monitor of that software was interfering with rsd lite
Sent from my MB526 using XDA
Click to expand...
Click to collapse
Yes, I also read that thread and checked for it. I do not have belkin router software installed.

Sorry to missed this post.
I have the very same problem.
I tried each and every probe googled.
No luck.
Finally I have to install a brand new x86 Windows 7 Ultimate (I think not particularly ultimate, any would do e.g. home, home premium...etc).
To me it is the x86 that hinders me from recognizing the phone.
Sorry, it should be rsdlite not working along with x64 but seemless with x86.
Hope this helps !

kneepain said:
Sorry to missed this post.
I have the very same problem.
I tried each and every probe googled.
No luck.
Finally I have to install a brand new x86 Windows 7 Ultimate (I think not particularly ultimate, any would do e.g. home, home premium...etc).
To me it is the x86 that hinders me from recognizing the phone.
Sorry, it should be rsdlite not working along with x64 but seemless with x86.
Hope this helps !
Click to expand...
Click to collapse
Thanks for the reply. I found this is due to hardware issue. I sent it to service they replaced the board (with Defy+ board). Now it is working good with 2.3.6 defy+ stock ROM. Upgraded to Defy+!

arulshoponline said:
Thanks for the reply. I found this is due to hardware issue. I sent it to service they replaced the board (with Defy+ board). Now it is working good with 2.3.6 defy+ stock ROM. Upgraded to Defy+!
Click to expand...
Click to collapse
arulshoponline, I am suffering with this prob for soo long.. all the forums have been of very little help to me.
First, I rooted my phone and then installed the cyanogen 7.2 mod instead of 7.1 by mistake. Everything was going as instructed by various tutorials.. Then when the device rebooted, it was stuck on the screen showing android & cyanogen mod logo with an arrow going round and round(in blue). It kept repeating itself. Thinking my phone froze, I removed the battery. Upon reboot, it Got stuck at the "Google" image which replaced the original Motorola symbol after the update. Ever since I cannot get RSD Lite to recognize the device even after installing Motorola Helper drivers as well as the phone drivers. I am frustrated and seriously thinking of just getting a professionals help.
Any suggestions anyone?? The SBF file i used is JRDNEM_U3_3.4.3-11_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB03A.0R_PDS03C_USAJRDNFRYORTGB_P010_A007_HWp3_Service1FF.sbf
is this the wrong one?
arulshoponline - Where did you give your phone for service? Did you give it to Moto itself? or some local repair store?
P.S I was initiallly running Froyo 2.2.1 and wanted to upgrade to Gingerbread 2.3.4 when all this happened I am running on Win XP, currently with RSD 5.3. I have tried 4.9 and 5.0 so far.

akira.nev said:
arulshoponline, I am suffering with this prob for soo long.. all the forums have been of very little help to me.
First, I rooted my phone and then installed the cyanogen 7.2 mod instead of 7.1 by mistake. Everything was going as instructed by various tutorials.. Then when the device rebooted, it was stuck on the screen showing android & cyanogen mod logo with an arrow going round and round(in blue). It kept repeating itself. Thinking my phone froze, I removed the battery. Upon reboot, it Got stuck at the "Google" image which replaced the original Motorola symbol after the update. Ever since I cannot get RSD Lite to recognize the device even after installing Motorola Helper drivers as well as the phone drivers. I am frustrated and seriously thinking of just getting a professionals help.
Any suggestions anyone?? The SBF file i used is JRDNEM_U3_3.4.3-11_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB03A.0R_PDS03C_USAJRDNFRYORTGB_P010_A007_HWp3_Service1FF.sbf
is this the wrong one?
arulshoponline - Where did you give your phone for service? Did you give it to Moto itself? or some local repair store?
P.S I was initiallly running Froyo 2.2.1 and wanted to upgrade to Gingerbread 2.3.4 when all this happened I am running on Win XP, currently with RSD 5.3. I have tried 4.9 and 5.0 so far.
Click to expand...
Click to collapse
Sorry for you akira.nev. I also really felt bad when mine went wrong. I gave it to Moto service they also said RSD & computer do not detect the phone and advised to change the board. It cost me 2000INR.
Did your phone get connected with the computer thru USB before flashing cm7?Did you try to flash with RSD from another computer? Do you hear any sound when you plug in your device?
P.S Use the latest RSD. It works seamless in my laptop with Windows7 x64 home basic.

McGuver. Hack works
Sent from my MB525 using Xparent Cyan Tapatalk 2

[Q] usb came unplugged durring sbf flash

My friends purchased a Droid Pro with CM9 already loaded onto it. He asked for my help because he was experiencing bugs and wanted to go back to a stock ROM.
I installed the Motorola drivers.
I put the phone into clockwordmod recovery and cleared all the caches and battery stats.
I then restarted into the Bootloader and started up a current version of RSD lite on my Win7x64 installation.
Next I got the SBF file loaded up in RSD lite and started flashing.
As it was nearing completion I picked up the phone to "catch the boot" and in the process bumped the USB cable just enough to terminate the connection and the process failed.
Now I can't get passed the Bootloader which says Code Corrupt.
I have spent hours upon hours scouring the internet trying different fixes to fix this problem.
Now when I try to flash it again with RSD lite it gets stuck when switching the phone to PB pass through and FAILS with the error 0x70be because it can't find the driver for MDM6600 and my system labels it as an unknown device.
I have since installed WinXPx84 on my system and tried the SBF process over and over in different ways hoping that it will take.
Any insight is greatly appreciated.
Thank you,
PEZ

PEZ Dispenser said:
My friends purchased a Droid Pro with CM9 already loaded onto it. He asked for my help because he was experiencing bugs and wanted to go back to a stock ROM.
I installed the Motorola drivers.
I put the phone into clockwordmod recovery and cleared all the caches and battery stats.
I then restarted into the Bootloader and started up a current version of RSD lite on my Win7x64 installation.
Next I got the SBF file loaded up in RSD lite and started flashing.
As it was nearing completion I picked up the phone to "catch the boot" and in the process bumped the USB cable just enough to terminate the connection and the process failed.
Now I can't get passed the Bootloader which says Code Corrupt.
I have spent hours upon hours scouring the internet trying different fixes to fix this problem.
Now when I try to flash it again with RSD lite it gets stuck when switching the phone to PB pass through and FAILS with the error 0x70be because it can't find the driver for MDM6600 and my system labels it as an unknown device.
I have since installed WinXPx84 on my system and tried the SBF process over and over in different ways hoping that it will take.
Any insight is greatly appreciated.
Thank you,
PEZ
Click to expand...
Click to collapse
Woah woah woah. Windows x84?
Sent from my Nexus 7 using xda app-developers app

BlackFire27 said:
Woah woah woah. Windows x84?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
x84 is just another way of saying 32 bit

I think it is x86. Back on topic. So, try downloading another sbf that is from before 4.7.8 Try sbfing that
Sent from my Amazon Kindle Fire using Tapatalk HD

Vlasp said:
I think it is x86. Back on topic. So, try downloading another sbf that is from before 4.7.8 Try sbfing that
Sent from my Amazon Kindle Fire using Tapatalk HD
Click to expand...
Click to collapse
Ah, my bad, yes x86. Like I said I've spent hours and hours on this and missed some sleep.
I will look into and try other SBFs however I have been having trouble locating good links considering the age of the device. Know of any resources?
What do you mean by 4.7.8? I can't find any information on that. The SBF files that I have tried flashing are 2.26.20 and another one I found for the Droid Pro that is just labeled 3087.sbf

PEZ Dispenser said:
Ah, my bad, yes x86. Like I said I've spent hours and hours on this and missed some sleep.
I will look into and try other SBFs however I have been having trouble locating good links considering the age of the device. Know of any resources?
What do you mean by 4.7.8? I can't find any information on that. The SBF files that I have tried flashing are 2.26.20 and another one I found for the Droid Pro that is just labeled 3087.sbf
Click to expand...
Click to collapse
my bad 4.7.3. Try that one by searching on google.
Sent from my Amazon Kindle Fire using Tapatalk HD

Vlasp said:
I think it is x86. Back on topic. So, try downloading another sbf that is from before 4.7.8 Try sbfing that
Sent from my Amazon Kindle Fire using Tapatalk HD
Click to expand...
Click to collapse
ah, I see, 4.7.8 is the blur version. Downloading 4.6.8 now. Hopefully that works.

Have I permanently bricked a phone for the first time?
Ok, so now I have tried 4.6.8, 4.7.3, 4.7.8 and probably also a couple others by now with no luck.
All of them get error switching phone to PB pass through mode (0x07BE). My system cannot find the driver for MDM 6600 and my systems will only see it as an unknown device after RSD light trys to do the PB mode switch. I have tried installing the driver pack after the PB switch, which doesn't work. Extracting the drivers to a location that I then direct device manager to and that doesn't work.
Any other ideas on how to get this good hardware back and going again?
I will try the process on a completely different computer tomorrow, maybe the OS switch wasn't enough and there is a conflict with my machine. I doubt it though because I have used this machine to work on my D3.

PEZ Dispenser said:
Ok, so now I have tried 4.6.8, 4.7.3, 4.7.8 and probably also a couple others by now with no luck.
All of them get error switching phone to PB pass through mode (0x07BE). My system cannot find the driver for MDM 6600 and my systems will only see it as an unknown device after RSD light trys to do the PB mode switch. I have tried installing the driver pack after the PB switch, which doesn't work. Extracting the drivers to a location that I then direct device manager to and that doesn't work.
Any other ideas on how to get this good hardware back and going again?
I will try the process on a completely different computer tomorrow, maybe the OS switch wasn't enough and there is a conflict with my machine. I doubt it though because I have used this machine to work on my D3.
Click to expand...
Click to collapse
now lets go 1 step back on rsd lite and downgrade to the second latest version. and install the Motorola bootloader drivers or normal drivers with that. quick question. can you boot past the error screen into the recovery? It is R and Q and Power button. when the M screen is present.
Sent from my Amazon Kindle Fire using Tapatalk HD

Vlasp said:
now lets go 1 step back on rsd lite and downgrade to the second latest version. and install the Motorola bootloader drivers or normal drivers with that. quick question. can you boot past the error screen into the recovery? It is R and Q and Power button. when the M screen is present.
Sent from my Amazon Kindle Fire using Tapatalk HD
Click to expand...
Click to collapse
I'm using RSD lite 6.1.5, so you say I should try 6.1.4 or another older version?
What is the difference between Motorola bootloader drivers and normal drivers?
I thought it was R and M and the Power button to get into recovery. Anyway, I tried R and Q which does not work either. Doesn't look like I can get into recovery. Can I flash a recovery system onto it with RSD lite and then fix it from there?
Thank you Vlasp for taking the time to help me out with this.

PEZ Dispenser said:
I'm using RSD lite 6.1.5, so you say I should try 6.1.4 or another older version?
What is the difference between Motorola bootloader drivers and normal drivers?
I thought it was R and M and the Power button to get into recovery. Anyway, I tried R and Q which does not work either. Doesn't look like I can get into recovery. Can I flash a recovery system onto it with RSD lite and then fix it from there?
Thank you Vlasp for taking the time to help me out with this.
Click to expand...
Click to collapse
I am getting all of my facts mixed up. It is R and M, and there are no bootloader drivers. and regarding the rsdlite, try the 6.1.4 or something.
Sent from my Amazon Kindle Fire using Tapatalk HD

You can flash the bootloader update, and then try flashing again... 4.04 or something like that... I cant check as my phone got stolen last week, but I think it may solve your problem

donlloreda said:
You can flash the bootloader update, and then try flashing again... 4.04 or something like that... I cant check as my phone got stolen last week, but I think it may solve your problem
Click to expand...
Click to collapse
I haven't been able to find any information on this or any other bootloader update. Can you maybe point me in the right direction?

try turning off firewall and flash it again
Sent from my Motorola MB612 using xda app-developers app

Hot-dog007 said:
try turning off firewall and flash it again
Sent from my Motorola MB612 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure how that is supposed to help and the firewall was already disabled anyway.
When RSD lite finishes flashing and wants to switch the phone to PB pass through mode the system sees my phone as an unknown device and won't install the correct driver correctly. I do have the option to select which driver to install and can find Motorola from the menu but then I am faced with about 10 different options on what specific device driver to install. One of them is Motorola PB interface, one of them is Motorola Flash interface, etc etc. I've tried the PB interface driver and it seems like it installs but it still shows up as an unknown device on my system and the flashing fails.

try sbf_flash using linux

266829231332

Ok so I'm trying to install the latest version of cyanogenmod nightlies for D801 LG G2 and when doing so it says FAILED! this is not a D801 it's a g2??? Any help?

Twrp or cwm? And what version.
Sent from my LG-VS980 using xda app-developers app

Lawlrus said:
Twrp or cwm? And what version.
Sent from my LG-VS980 using xda app-developers app
Click to expand...
Click to collapse
TWRP 2.6.3.2

your build.prop model number doesn't seem to match the required model number in the edify script.
Sent from my LG-D802

fma965 said:
your build.prop model number doesn't seem to match the required model number in the edify script.
Sent from my LG-D802
Click to expand...
Click to collapse
What needs to be done in this case?

Gtagv said:
What needs to be done in this case?
Click to expand...
Click to collapse
I also have another question when installing a new rom and leaving my internal storage intact which takes up about 16GBs that leaves me with little room for apps and games on the newly installed rom. What can done about this?

Gtagv said:
What needs to be done in this case?
Click to expand...
Click to collapse
Funny thing is I have installed 10.2 and the nightly without any problems before and now this?

Gtagv said:
Funny thing is I have installed 10.2 and the nightly without any problems before and now this?
Click to expand...
Click to collapse
Is there a CWM recory mod for this?

Gtagv said:
Is there a CWM recory mod for this?
Click to expand...
Click to collapse
I think I have bricked my phone! My phone won't even turn on now? OMG! I plug in the usb to the computer and 30 files come asking to format the drives before they are readable!

Gtagv said:
I think I have bricked my phone! My phone won't even turn on now? OMG! I plug in the usb to the computer and 30 files come asking to format the drives before they are readable!
Click to expand...
Click to collapse
Rule 1 : Read everything, then read it all again then understand what your reading then flash
As for the "bricked" phone, people need to learn what a brick is however this guide is almost guaranteed to fix the issue for you, http://forum.xda-developers.com/showthread.php?t=2432476

fma965 said:
Rule 1 : Read everything, then read it all again then understand what your reading then flash
As for the "bricked" phone, people need to learn what a brick is however this guide is almost guaranteed to fix the issue for you, http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
My Phone won't enter download mode! it just sits in a pale blue state once plug in to the usb and computer.

Gtagv said:
My Phone won't enter download mode! it just sits in a pale blue state once plug in to the usb and computer.
Click to expand...
Click to collapse
turn off the phone, then hold volume up/down i forgot which and connect usb cable.

what is this i don't even

m4570d0n said:
what is this i don't even
Click to expand...
Click to collapse
pointless post?

fma965 said:
turn off the phone, then hold volume up/down i forgot which and connect usb cable.
Click to expand...
Click to collapse
screen pops up with ???????????????????????????????????????????????????????? and stops, it says phone is not connected to the pc please connect to the pc and try again. here is an image.\
Here's another image.

Gtagv said:
screen pops up with ???????????????????????????????????????????????????????? and stops, it says phone is not connected to the pc please connect to the pc and try again. here is an image.\
Here's another image.
Click to expand...
Click to collapse
The Phone will not come on period. Only when I plug it in to the usb on the computer does screen light come on but that's it. Nothing else. You just know it's on because there is a change in the back light from really dark to just somewhat dark.

Gtagv said:
The Phone will not come on period. Only when I plug it in to the usb on the computer does screen light come on but that's it. Nothing else. You just know it's on because there is a change in the back light from really dark to just somewhat dark.
Click to expand...
Click to collapse
I installed Rom Toolbox pro just paid for it too. Made a back up using twrp deleted my old back up tried one final time to install the new cyanongenmod nightly that didn't work so I rebooted the back I had just made and my died. I should also mention that I had just gotten my IMEI unlocked if that makes a difference.

Gtagv said:
I installed Rom Toolbox pro just paid for it too. Made a back up using twrp deleted my old back up tried one final time to install the new cyanongenmod nightly that didn't work so I rebooted the back I had just made and my died. I should also mention that I had just gotten my IMEI unlocked if that makes a difference.
Click to expand...
Click to collapse
If you can see from the images below what I am talking about! One is in a deep black state which fully off and the other is a little brighter with the USB hooked up to the pc.

m4570d0n said:
what is this i don't even
Click to expand...
Click to collapse
could you please check out the images below I have attached I can give more info if needed!

Gtagv said:
could you please check out the images below I have attached I can give more info if needed!
Click to expand...
Click to collapse
Firstly you shouldn't really triple post, secondly have you tried this? http://forum.xda-developers.com/showthread.php?t=2471370