Related
So I followed the instructions to flash back to DI18 and when it booted up android processes started non-stop FCing so I did a battery pull to hard reboot but when I booted back up it froze at the "SAMSUNG www.samsung.com" screen. Am I bricked and if I am is a soft brick or a hard brick and if its soft what can I do to fix it? Finally if its unfixable think I can bring it back and claim I didn't do anything and get a new one? Please help...
You're not bricked.
Sent from my SPH-D700 using Tapatalk
herzzreh said:
You're not bricked.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
So what can I do? I can't even boot into CWM.
if you can get to the boot screen you aren't bricked, odin the DI18 tar.
Magic Oreo said:
if you can get to the boot screen you aren't bricked, odin the DI18 tar.
Click to expand...
Click to collapse
I am on a Mac and do not really have access to a windows machine nor do I have a license...
find a friend with a pc, use a library computer. i don't think you can use odin on a mac :X
Magic Oreo said:
find a friend with a pc, use a library computer. i don't think you can use odin on a mac :X
Click to expand...
Click to collapse
You can't...so I don't need to install anything? Its just an .exe right?
kenvan19 said:
You can't...so I don't need to install anything? Its just an .exe right?
Click to expand...
Click to collapse
yes its a .exe, and as far as im aware bootcamp is only way to odin on a mac. so find a pc, or live with phone that doesnt work :X.
Pull the battery wait a min or two. Boot up holding the vol down camera and power.
Sent from my SPH-D700 using XDA App
Some time ago I was reading a thread where a guy was talking about a "custom made" version of Odin that he used on his mac. The name of the program started with an H, but I can't for the life of me remember where I saw it. Happy searching!
knx2 said:
Pull the battery wait a min or two. Boot up holding the vol down camera and power.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Tried that but I'll try again and I'll try searching for that custom odin too. Thank you. Definitely made explaining to my fiancee why I haven't been answering texts and the subsequent question of 'what the f*** did you do to your phone you dumbs***'
No dice on the battery pull or finding the custom odin. Guess I'll have to be phone-less until tomorrow and hope I can get access to win machine.
leatherneck6017 said:
Some time ago I was reading a thread where a guy was talking about a "custom made" version of Odin that he used on his mac. The name of the program started with an H, but I can't for the life of me remember where I saw it. Happy searching!
Click to expand...
Click to collapse
i believe you are thinking of Heimdal. I don't know anything about using it, but I believe it is supposed to be an OS independent version of Odin3.
OP, find a friend with windows, that will be the easiest way. Otherwise, do some research on Heimdal.
Also, as other people have said, as long as you can get to the download screen. you are NOT bricked.
Can you get into clockwork recovery mode? With power off press and hold the camera button and the volume down button while powering on. If you can you can restore a back up if you made one or flash a rom.
Sent from my SPH-D700 using XDA App
http://forum.xda-developers.com/showthread.php?t=755265
Found that thread for downloading Heimdall
Here is the developers site as well http://www.glassechidna.com.au/products/heimdall/
n0esc said:
http://forum.xda-developers.com/showthread.php?t=755265
Found that thread for downloading Heimdall
Here is the developers site as well http://www.glassechidna.com.au/products/heimdall/
Click to expand...
Click to collapse
Wow thank you! I'll give this a shot!
Update: I tried heimdal but no dice...someone in my class has a windows netbook and I used it to ODIN and bingo, back to stock. Woohoo!
So I was told to install the deodexed [sp] of the GB leak, so I did on top of my rooted, non deodexed version, without wiping. After this I wiped my data a few times, as I heard it would be best to do. Well, after doing so... my phone won't stop bootlooping. I can't access the bootstrapped bootloader, only the stock Moterola one, and I cleared my data with it hoping it would work too...
Help please? How do I "sbf" back to stock or whatever?
Yeah, I don't think it was possible to go from orginial GB leak straight to the rooted one.
You will need RSDLite 4.8 or higher and 2.3.340 sbf file. Both should be easily findable with a Google search. Follow SBF instructions from there.
I hope its ok to post this link here:
http://www.droidxforums.com/forum/droid-x-rs-guides/12015-complete-droid-x-sbf-flashing-guide.html
I did everything it told me to in that guide, but the spf got to 99% and said it failed. Now my phone says "code corrupt" on the bootloader screen fml
tried flashing it again, same thing happened. It failed at "switching phone to BP pass through" apparently. help me please
thewanton said:
I did everything it told me to in that guide, but the spf got to 99% and said it failed. Now my phone says "code corrupt" on the bootloader screen fml
Click to expand...
Click to collapse
Now just do the system only sbf.it will work
Sent from my DROIDX using XDA App
Do you have the latest drivers installed? Try using RSDlite 4.9!
thewanton said:
I did everything it told me to in that guide, but the spf got to 99% and said it failed. Now my phone says "code corrupt" on the bootloader screen fml
Click to expand...
Click to collapse
Samething happen to me......I didn't want to try and fix it I know I was able to,but i called Verizon and got a new phone the next day
z06mike said:
Do you have the latest drivers installed? Try using RSDlite 4.9!
Click to expand...
Click to collapse
i found rsdlite 4.9 didnt recognize my phone but 4.8 did
itzjen said:
Samething happen to me......I didn't want to try and fix it I know I was able to,but i called Verizon and got a new phone the next day
Click to expand...
Click to collapse
Like what did you say to them?
tyvallely said:
Like what did you say to them?
Click to expand...
Click to collapse
this is totally being lazy AND the reason why everyone is raising their prices on insurance and why ppl like motorola are locking bootloaders. if it is too much or you're too lazy to do it. dont do it in the first place. sbf isnt hard there are a gazillion guides to sbf'ing. not trying to be rude but seriously?
Yeah, I spf'd just fine (twice now cause I'm dumb lol) so problem solved. I would like some help in my other topic though, about GB deodexed.
thewanton said:
Yeah, I spf'd just fine (twice now cause I'm dumb lol) so problem solved. I would like some help in my other topic though, about GB deodexed.
Click to expand...
Click to collapse
you have to sbf to .340 use z4 root to root then install DX bootstraper reboot to recovery flash gbrooted.zip if you get stuck in bootloop go into factory recovery and wipe data reboot download and install D2 bootstrapper yes D2, boot into recovery and flash gbrooteddeodexed.zip and let it try and boot it SHOULD bootup after a couple of minutes, if it doesnt get into stock recovery and wipe data, reboot
also it could bootloop because of corrupt downloads
tyvallely said:
Like what did you say to them?
Click to expand...
Click to collapse
'I was messing with my phone a bit i was going through the settings and i came across the update menu and i seen that i had an update so i went on ahead and tried to update it....so i was waiting for it to download on my status bar andd when it finished it went to another screen were it had triangle with an exclamation mark and the little android thing in the back so i waited for it to finish updated and when it finished it booted up and screen was black saying code corrup"
I don't really talk like that,but I was trying to make it seem as if i don't know much about phones.They have to send you another phone because they will think it's a manufacturing problem...
slfdjgdkkjfh! Damnit! I've been working on this all day and just now realized that the issue was that I wasn't using D2 bootstrap, I was still using the DX one and flashing deodexed right after the rooted one.
itzjen said:
'I was messing with my phone a bit i was going through the settings and i came across the update menu and i seen that i had an update so i went on ahead and tried to update it....so i was waiting for it to download on my status bar andd when it finished it went to another screen were it had triangle with an exclamation mark and the little android thing in the back so i waited for it to finish updated and when it finished it booted up and screen was black saying code corrup"
I don't really talk like that,but I was trying to make it seem as if i don't know much about phones.They have to send you another phone because they will think it's a manufacturing problem...
Click to expand...
Click to collapse
which is a problem that was caused by YOU because you take that and sbf
thewanton said:
slfdjgdkkjfh! Damnit! I've been working on this all day and just now realized that the issue was that I wasn't using D2 bootstrap, I was still using the DX one and flashing deodexed right after the rooted one.
Click to expand...
Click to collapse
most ppl overlook that as a typo
Funnyface19 said:
which is a problem that was caused by YOU because you take that and sbf
Click to expand...
Click to collapse
Yes it was a problem that I caused but at that momment I got scared and wasn't sure what I was suppose to do,and because I have no internet at home because i'm never home I use wireless tether when im there and my phone was messed up so wasn't able to look at guides to fix it.....So the easiest thing I thought of is calling them.I wouldn't have mind fixing it but again I wasn't able to at that momment.
I had the same thing happen. Put the letter p at the end of the file name and move it to c:\ this worked for me on rsd lite 4.8 I just kept pulling the battery and retrying until it went through
Sent from my Xoom using XDA Premium App
meshdub said:
Yeah, I don't think it was possible to go from orginial GB leak straight to the rooted one.
You will need RSDLite 4.8 or higher and 2.3.340 sbf file. Both should be easily findable with a Google search. Follow SBF instructions from there.
Click to expand...
Click to collapse
I'd just like to point out that you don't actually need rsd lite 4.8 or higher. 4.7 has worked perfectly for me the several times I have SBF'ed
I am having issues installing the SBF for 2.2. I am getting an error message about not being able to find initialization value. Did anybody run into this error and find out how to fix it.
zax10 said:
I am having issues installing the SBF for 2.2. I am getting an error message about not being able to find initialization value. Did anybody run into this error and find out how to fix it.
Click to expand...
Click to collapse
a) make sure your sbf is good.
b) what version of RSD lite are you using on what OS?
I got the sbf from the one attached to the thread. I am using rsdlite 4.5. It is the only one that would read that the bravo was connected. I am on windows 7 starter on netbook.
Sent from my X10i TripNMiUI using XDA Premium App
zax10 said:
I got the sbf from the one attached to the thread. I am using rsdlite 4.5. It is the only one that would read that the bravo was connected. I am on windows 7 starter on netbook.
Sent from my X10i TripNMiUI using XDA Premium App
Click to expand...
Click to collapse
You might could try RSD 5.0
Although, I had problems with RSD on my WIN7 Vaio also that I could never get around so I just used an XP to do the job.
I gave up with win7 netbook. Used my XP desktop and it started and finished perfectly.
Sent from my X10i TripNMiUI using XDA Premium App
I flashed the linked version via rsd and have no launcher. It started briefly then went to black. Everything works just can't initiate anything. It said it was ready to dl an update after flash so I clicked yes thinking this might be motoblur...BUT, it's waiting for offpeak hours because I cannot turn on wifi. Any thoughts on the next step?
Also, does anyone have a link to the stock 2.1 sbf just in case? I'm kinda in need of my phone right now. thx
ctcost said:
I flashed the linked version via rsd and have no launcher. It started briefly then went to black. Everything works just can't initiate anything. It said it was ready to dl an update after flash so I clicked yes thinking this might be motoblur...BUT, it's waiting for offpeak hours because I cannot turn on wifi. Any thoughts on the next step?
Also, does anyone have a link to the stock 2.1 sbf just in case? I'm kinda in need of my phone right now. thx
Click to expand...
Click to collapse
re-download the sbf in the other thread and re-flash it. it probably flashed wrong in some minor way that is messing something up.
Nahh still black. Thanks for the thought though. At least I can receive incoming calls and everything else for now. Then use the recent calls list to dial back after calling the bravo. :/
ctcost said:
Nahh still black. Thanks for the thought though. At least I can receive incoming calls and everything else for now. Then use the recent calls list to dial back after calling the bravo. :/
Click to expand...
Click to collapse
There is no 2.1 .sbf so if the 2.2 .sbf isn't working then something is wrong. If you can, do a factory data reset and reboot and then try to flash the 2.2 .sbf. see if that works.
Thanks Mcfarmfresh. Didn't want to go that route but didn't lose anything but some texts. It got me back to factory. Will try the flash again in the am.
Ladies and gentlemen, I'm proud to announce the birth of a brand new baby FroYo. Thx again Mcfarmfresh for pushing me in that direction. With Motoblur, all I lost were apps...no biggie.
ctcost said:
Ladies and gentlemen, I'm proud to announce the birth of a brand new baby FroYo. Thx again Mcfarmfresh for pushing me in that direction. With Motoblur, all I lost were apps...no biggie.
Click to expand...
Click to collapse
Awesome! Good to hear. Glad I could help.
ctcost said:
Thanks Mcfarmfresh. Didn't want to go that route but didn't lose anything but some texts. It got me back to factory. Will try the flash again in the am.
Click to expand...
Click to collapse
HELP! I meet the same problem! How can you resolve it? Please help me!
OK I had CM7 working and then I did something stupid and bricked my phone. When I do the SBF, it goes through and then upon reboot it boot-loops. I used the SBF from the other post and am using RSD 5.0, but am not sure what else could be going wrong. I wish I could have wiped things, but when it bricked it wouldn't get to the point for me to get into recovery. I hope I didn't brick it too bad...
edit: I found a post on how to get to the recovery mode to wipe the data. If you need to wipe data after installing an sbf, press the down volume button and hold then press the power button until you see the moto symbol. after you see the exclamation point, press BOTH the up and down volume buttons together to get to the options. The last post I found was a little confusing because some people say you have to touch the bottom right of the screen, which doesn't work.
dontbejeff said:
OK I had CM7 working and then I did something stupid and bricked my phone. When I do the SBF, it goes through and then upon reboot it boot-loops. I used the SBF from the other post and am using RSD 5.0, but am not sure what else could be going wrong. I wish I could have wiped things, but when it bricked it wouldn't get to the point for me to get into recovery. I hope I didn't brick it too bad...
edit: I found a post on how to get to the recovery mode to wipe the data. If you need to wipe data after installing an sbf, press the down volume button and hold then press the power button until you see the moto symbol. after you see the exclamation point, press BOTH the up and down volume buttons together to get to the options. The last post I found was a little confusing because some people say you have to touch the bottom right of the screen, which doesn't work.
Click to expand...
Click to collapse
Did this end up working for you?
Yes it did. I am back using CM7 on my Bravo
Sent from my MB525 using XDA App
The posts relating to pushing the corner of the screen relate to Eclair, 2.1, recovery menu. Froyo, 2.2 ^ is pushing both Vol ^ and v.
i tried to sbf from gingerbread back to froyo using rsd lite and nw my phones stuck on the m logo, i dont know what to do i been readin through the forums but i cant seem to find anything that works please someone help me!!!
chip0 said:
i tried to sbf from gingerbread back to froyo using rsd lite and nw my phones stuck on the m logo, i dont know what to do i been readin through the forums but i cant seem to find anything that works please someone help me!!!
Click to expand...
Click to collapse
Did you do the full sbf?
Sent from my DROIDX using XDA App
ya i did the full sbf, SHADO_X6_2.3.34_SYSTEM-ONLY.sbf thats the file i downloaded...
chip0 said:
ya i did the full sbf, SHADO_X6_2.3.34_SYSTEM-ONLY.sbf thats the file i downloaded...
Click to expand...
Click to collapse
thats not the full one. thats the system only one. use full one here http://www.mydroidworld.com/forums/droid-x-discussion/6367-new-full-sbf-droid-x-2-3-340-a.html
dont forget to do a factory reset after doing the sbf
it said failed flashing process error sending ram download for bootloader
chip0 said:
it said failed flashing process error sending ram download for bootloader
Click to expand...
Click to collapse
Now do the system only and you should be good
Sent from my DROIDX using XDA App
it said the same thing, it faild, n it said error getting subscriber info
chip0 said:
it said the same thing, it faild, n it said error getting subscriber info
Click to expand...
Click to collapse
That's weird...I usually do the Full Sbf then the system only because the Full fails....can you get into recovery?
Sent from my DROIDX using XDA App
u mean by pressing the power button n the menu button? cuz when i do that it just shows a android guy n a exclamation mark inside a triangle. im not sure but i think it keeps failing because my battery is low so im charging it n im going to try again in a lil bit should i do the full first again then the system only? n if u have any other ideas let me know lol...looks like its gunna be a LONG night for me hahaha
chip0 said:
u mean by pressing the power button n the menu button? cuz when i do that it just shows a android guy n a exclamation mark inside a triangle. im not sure but i think it keeps failing because my battery is low so im charging it n im going to try again in a lil bit should i do the full first again then the system only? n if u have any other ideas let me know lol...looks like its gunna be a LONG night for me hahaha
Click to expand...
Click to collapse
Ya and press the search button. Wipe data/factory reset and see what happens
Sent from my DROIDX using XDA App
now i cant even do that, no matter what i press it takes me to the boot loader
Flash the full again. If it fails, pop out the battery and flash the full again. It may tell you code corrupt, but it will allow you to flash it. It may also take 2-3 tries. I had the same issue flashing back, but it will take
Sent from my DROIDX using XDA Premium App
ok, doing it again as we speak lol
dude, THANK YOU! seriously u saved my life...can i buy u a beer? lol
No worries,its happened to me a few times. Just glad I could help
Sent from my DROIDX using XDA Premium App
how do you get pass the activate screen? Im not using vzw and i need to root the phone.
undertai said:
how do you get pass the activate screen? Im not using vzw and i need to root the phone.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=L5XjF6sPef4
this seems to be the same issue I'm having.. i just updated to GB yesterday and rooted my phone.. i am super novist at this so i have had a few issues the last couple days but anyway, my bootloader say 30.04 so i grabbed the SHADO_X6_2.3.34_SYSTEM-ONLY.sbf tried to flash using RSD lite and then my phone now shows the Red "M" logo... I'm kinda worried i downloaded the "Happy Holidays".sbf hoping that would work instead but RSD lite doesn't even allow me to start with that program.. so i saw earlier on this thread there was a different file to use.. i'm downloading that now but ultimately i would really like to get the Miui Rom working.. well actually ANY rom would be cool if someone see's this before i try to flash that file let me know otherwise I'll just re post my results.
---------- Post added at 06:22 PM ---------- Previous post was at 05:58 PM ----------
so now im super confused... both the holiday sbf and the one listed earlier wont even work in RSD lite.... and i'm still stuck at the Red M logo... what am i doing wrong?
Rhill051 said:
this seems to be the same issue I'm having.. i just updated to GB yesterday and rooted my phone.. i am super novist at this so i have had a few issues the last couple days but anyway, my bootloader say 30.04 so i grabbed the SHADO_X6_2.3.34_SYSTEM-ONLY.sbf tried to flash using RSD lite and then my phone now shows the Red "M" logo... I'm kinda worried i downloaded the "Happy Holidays".sbf hoping that would work instead but RSD lite doesn't even allow me to start with that program.. so i saw earlier on this thread there was a different file to use.. i'm downloading that now but ultimately i would really like to get the Miui Rom working.. well actually ANY rom would be cool if someone see's this before i try to flash that file let me know otherwise I'll just re post my results.
---------- Post added at 06:22 PM ---------- Previous post was at 05:58 PM ----------
so now im super confused... both the holiday sbf and the one listed earlier wont even work in RSD lite.... and i'm still stuck at the Red M logo... what am i doing wrong?
Click to expand...
Click to collapse
follow this guide http://rootzwiki.com/showthread.php?399-UPDATED-GUIDE-LINKS-DX-SBF-s
I followed your advice to the website and from there i found this link http://www.droidxforums.com/forum/droid-x-sbf/23638-linux-solution-your-windows-rsd-lite-problems.html It is a walk through on how to boot using linux and flashing your phone, it worked like a charm even after a few other attempts at using RSD lite that was the only method that worked i would highly recommend someone to use this method
First of all, I already found a lot of helpful info on this forum. Thanks for that!
But now it seems I am really stuck.... I searched through the forum, but still couldnt find any solution to my problem.
After succesfully flashing a custom rom, I wanted to try a different one.
At first i was stuck on the bootlogo. After reading some tips here I was able to get into recovery mode.
Then i guess I flashed a wrong SBF.....
Now i cant turn on my phone, no matter what i try, my screen stays all black. RSD Lite doesnt see my phone.
When connected to my pc, the white LED does come on, but thats all what happens.....
Any one got an idea? Or can I just throw away my Defy+?
Reply
Make sure your in bootloader mode first.
Pull out battery.
Reinsert battery while holding volume up key (thanks to drwario)
OR
Try the latest version of RSDlite. I think its 5.6. If it still doesn't work, try different versions of RSDlite.
OR
Install latest drivers from Moto website.
OR
Try another laptop/PC.
hotdog125 said:
Make sure your in bootloader mode first.
Pull out battery.
Reinsert battery while holding volume up key (thanks to drwario)
OR
Try the latest version of RSDlite. I think its 5.6. If it still doesn't work, try different versions of RSDlite.
OR
Install latest drivers from Moto website.
OR
Try another laptop/PC.
Click to expand...
Click to collapse
Thank you for your reply,
I tried all of that, without any results.....
I now have RSD 5.7, have the latest moto drivers. other pc didnt help either.
Any other ideas? Starting to get pretty desperate here....
Thanks again
reply
BoyBelanda said:
Thank you for your reply,
I tried all of that, without any results.....
I now have RSD 5.7, have the latest moto drivers. other pc didnt help either.
Any other ideas? Starting to get pretty desperate here....
Thanks again
Click to expand...
Click to collapse
Sometimes a 64-bit windows installation causes problems with RSDlite. Try a 32-bit PC.
If not working, I'm afraid you might (just might) have to get your board replaced. Take it to the service center and ask them.
EDIT: Check this link for help - http://androidforums.com/droid-x-all-things-root/209019-rsdlite-windows-7x64-problems-solutions.html
you should change your phone i had defy and defy + and the bootloader is completely locked dont try!
hotdog125 said:
Sometimes a 64-bit windows installation causes problems with RSDlite. Try a 32-bit PC.
If not working, I'm afraid you might (just might) have to get your board replaced. Take it to the service center and ask them.
Click to expand...
Click to collapse
Ok, only have 64bit systems here.....
Get my board replaced? uhmmmm.... sounds exspensive, maybe even more exspensive than a new phone.
alvin182 said:
you should change your phone i had defy and defy + and the bootloader is completely locked dont try!
Click to expand...
Click to collapse
Dont try what? This defy+ is my back up phone, I have an sony experia go as my daily phone. But have some problems with that one aswell....
reply
BoyBelanda said:
Ok, only have 64bit systems here.....
Get my board replaced? uhmmmm.... sounds exspensive, maybe even more exspensive than a new phone.
Click to expand...
Click to collapse
Try a 32-bit PC, wherever available... Worth a shot.
hotdog125 said:
Try a 32-bit PC, wherever available... Worth a shot.
Click to expand...
Click to collapse
So, I tried 32bit pc..... Phone is still not recognized in RSD
White led does come on, but thats all!
Frustrating! But thanks for your help.....
BoyBelanda said:
So, I tried 32bit pc..... Phone is still not recognized in RSD
White led does come on, but thats all!
Frustrating! But thanks for your help.....
Click to expand...
Click to collapse
got the smae problem !
dont know what to do 2
tuneon said:
got the smae problem !
dont know what to do 2
Click to expand...
Click to collapse
same problem here...!!! i tried a couple of sbf files then it resulted in this...any help
reply
As I said before, you might have to take it to the service center to have the board changed
Bricked defy 525 please help!!!
I rooted my defy 525 and flashed cm10.1 and everything was coo but the aosp keyboard kept popping up and I wasn't able to do anything couldn't even enter my wifi password because of it so I rebooted my phone to recovery so I could wipe everything to try a different custom and now it just boots baccthe motto logo and wont do anything else! I have tried the remove battery thingy and bootload through using rsd but still nothing please help me!
Just get a universal charger. Charge your battery to 100%. Reboot, get in to boot loader. Flash an appropriate Sbf. That's it. Don't try macgiver hack.
Sent from my Amazon Kindle Fire using XDA Premium HD app
---------- Post added at 02:04 AM ---------- Previous post was at 02:00 AM ----------
And your motherboard is OK. The white light only means that your battery is empty.
Sent from my Amazon Kindle Fire using XDA Premium HD app
That should work. There were a couple of cases where the motherboard was damaged
THANK YOU
juanvenegasa said:
just get a universal charger. Charge your battery to 100%. Reboot, get in to boot loader. Flash an appropriate sbf. That's it. Don't try macgiver hack.
Sent from my amazon kindle fire using xda premium hd app
---------- post added at 02:04 am ---------- previous post was at 02:00 am ----------
and your motherboard is ok. The white light only means that your battery is empty.
Sent from my amazon kindle fire using xda premium hd app
Click to expand...
Click to collapse
i appreciate it bro!
Did it work? BTW. The only way to kill or damage a defy is by using de macgyver hack, because the over volt. After using the hack you can get your battery unrecognized by the android system, so never use it. The price of a universal charger is like 2 dollars and they are good for any mobile with an empty battery.
Sent from my Amazon Kindle Fire using XDA Premium HD app
Same Problem
BoyBelanda said:
First of all, I already found a lot of helpful info on this forum. Thanks for that!
But now it seems I am really stuck.... I searched through the forum, but still couldnt find any solution to my problem.
After succesfully flashing a custom rom, I wanted to try a different one.
At first i was stuck on the bootlogo. After reading some tips here I was able to get into recovery mode.
Then i guess I flashed a wrong SBF.....
Now i cant turn on my phone, no matter what i try, my screen stays all black. RSD Lite doesnt see my phone.
When connected to my pc, the white LED does come on, but thats all what happens.....
Any one got an idea? Or can I just throw away my Defy+?
Click to expand...
Click to collapse
Facing Same Problem !! None of the solutions suggested in the thread is working !!
Please help anyone ?
anandrathi13 said:
Facing Same Problem !! None of the solutions suggested in the thread is working !!
Please help anyone ?
Click to expand...
Click to collapse
Get latest RSDLite and Moto drivers. They are version 6.1 I think.
hotdog125 said:
Get latest RSDLite and Moto drivers. They are version 6.1 I think.
Click to expand...
Click to collapse
Didnt work for me.... Already got the lastest of everything, still without any positive results