Related
Hey guys i have this old HTC Tattoo i would like to use for a while i need to test things on.
HTC Tattoo (Orange)
S-on
1.6.61.43 custom firmware
rooted
But i have a problem, i need to get a custom ROM on it.
so far:
1. Would not accept sim unlock code
1. Rooted it once
2. used RUU_Click_Orange_UK_1.67.61.43_release_signed_NoDriver becouse it was needed to accept the simunlock code
3. Lost root, rooted it again with Universal root becouse old method didn't work anymore.
4. Everytime i tried to open recovery menu, it shows a picture with a orange triangle and the phone next to it
5. Installed ROM manager and put Clockwork, nothing.
6. Tried to back up, install rom from ROM Manager, still nothing =(
HELP D:!
Question: How do i fix it so i don't get this trinagle thing and i can go into the recovery menu
EDIT: I forgot to add, i THINK i made the SDCard a Goldcard, but i'm not sure... how do i cheak?
still no reply? kay:
I am going to help you
I am going to help you when I come home from school I know what you have to do and how.
Shaumaaa said:
I am going to help you when I come home from school I know what you have to do and how.
Click to expand...
Click to collapse
=0 i'm back from school
Shaumaaa said:
I am going to help you when I come home from school I know what you have to do and how.
Click to expand...
Click to collapse
Are you back D: ? i still need help
answer
1. That triangle is stock recovery which isn't useful for installing custom roms.
2. You need custom recovery.
3. You need adb.
4 You can install recovery like this one click http://forum.xda-developers.com/showthread.php?t=950759 or manualy using cmd(adb needed).
If installing manualy: You need flash_image and recovery.img .
For cmd, commands are:
adb push recovery.img /sdcard/recovery.img
adb shell
su
flash_image recovery /sdcard/recovery.img
exit
exit
Hope this was helpful for you
Sorry if you waited too much, I didn't have time to answer you.
Shaumaaa said:
1. That triangle is stock recovery which isn't useful for installing custom roms.
2. You need custom recovery.
3. You need adb.
4 You can install recovery like this one click http://forum.xda-developers.com/showthread.php?t=950759 or manualy using cmd(adb needed).
If installing manualy: You need flash_image and recovery.img .
For cmd, commands are:
adb push recovery.img /sdcard/recovery.img
adb shell
su
flash_image recovery /sdcard/recovery.img
exit
exit
Hope this was helpful for you
Sorry if you waited too much, I didn't have time to answer you.
Click to expand...
Click to collapse
I followed the instructions it didn't help, still same problem
no errors with the .exe, but no dice either
flashpermission denied with manual cmd
not enough memory on the device
in rom manager it says i have clockworkmod 5.0.2.0, might be the the problem that my phone is on orange or that it is S-on ? becouse i'm pretty sure it has custom recovery and it is rooted
i was able to root with this method before i used "RUU_Click_Orange_UK_1.67.61.43_release_signed_NoDriver" update
Now i am not able to use that root method, maybe it would have worked before i used it...
How do i downgrade or whatever from this RUU ?
Adb
Do you have adb drivers installed?
Shaumaaa said:
Do you have adb drivers installed?
Click to expand...
Click to collapse
Yes
Don't know then, I had site with better commands which helped me but it's dead now so I can't access them..
Guys help me!
I install android 4.3 on my phone, however I did not do the backup and by mistake I've downloaded the wrong rom, now my phone a message appears in the bootloader "in the OS installed"
I'm desperate with my phone only in recovery mode, please help me fix!
sprafael said:
Guys help me!
I install android 4.3 on my phone, however I did not do the backup and by mistake I've downloaded the wrong rom, now my phone a message appears in the bootloader "in the OS installed"
I'm desperate with my phone only in recovery mode, please help me fix!
Click to expand...
Click to collapse
Do you have a custom recovery installed? If so, load a .zip rom and push it via custom recovery...
.... If not, use ADB to push a reflash of a clean install of 4.3
instructions here my thread
http://forum.xda-developers.com/showthread.php?t=2376681
More info.what Phone mark modelo etc ?
Sent from my XT910 using Tapatalk 4 Beta
mc704 said:
Do you have a custom recovery installed? If so, load a .zip rom and push it via custom recovery...
.... If not, use ADB to push a reflash of a clean install of 4.3
instructions here my thread
http://forum.xda-developers.com/showthread.php?t=2376681
Click to expand...
Click to collapse
i do not have a custom recovery, the only thing it has in the cell and the image I downloaded wrong, my phone is in recovery screen that comes with it when I turn the volume button, after that I do not know what else to do, because I have no how to transfer the image to the correct cell to update, so I need to know how to transfer the image to the correct device
sprafael said:
i do not have a custom recovery, the only thing it has in the cell and the image I downloaded wrong, my phone is in recovery screen that comes with it when I turn the volume button, after that I do not know what else to do, because I have no how to transfer the image to the correct cell to update, so I need to know how to transfer the image to the correct device
Click to expand...
Click to collapse
if you are able to boot to recovery. you have to be in fast boot...
you can either use fastboot to flash over
or
boot into recovery and apply a rom via ADB sideload
mc704 said:
if you are able to boot to recovery. you have to be in fast boot...
you can either use fastboot to flash over
or
boot into recovery and apply a rom via ADB sideload
Click to expand...
Click to collapse
how to apply the room via ADB SIDE load, because I saw that option, so I do not know how to use
sprafael said:
how to apply the room via ADB SIDE load, because I saw that option, so I do not know how to use
Click to expand...
Click to collapse
open command prompt with adb loaded
type adb sideload romname.zip
the rom should be in the same folder the adb/fastboot tools are located
mc704 said:
open command prompt with adb loaded
type adb sideload romname.zip
the rom should be in the same folder the adb/fastboot tools are located
Click to expand...
Click to collapse
the fastboot do you explain this link??
http://forum.xda-developers.com/showthread.php?t=2376681
I'm downloading the android SDK at this time
let's see if I understand
put the phone in adb sideload
will open the CMD in the fastboot folder,
type in adb sideload image-occam-jwr66v.zip
Flashable zip not factory image, try cm10
Sent from my Nexus 4 using xda app-developers app
Hello! My first post here on the forum
So I've got this problem that my Samsung Galaxy S4 won't boot properly after the rom install.
The recovery I've been using is CWM and after the install when I press reboot the phone vibrates and the "Samsung Galaxy S4 GT-I9505" screen shows up and then the phone immediately shuts down again. Now I can't get the phone to start... :/
Thanks, Joakim.
juckeyy said:
Hello! My first post here on the forum
So I've got this problem that my Samsung Galaxy S4 won't boot properly after the rom install.
The recovery I've been using is CWM and after the install when I press reboot the phone vibrates and the "Samsung Galaxy S4 GT-I9505" screen shows up and then the phone immediately shuts down again. Now I can't get the phone to start... :/
Thanks, Joakim.
Click to expand...
Click to collapse
Do a data factory reset reflash the rom again and clear the caches and reboot. Which rom did you flash?
gee2012 said:
Do a data factory reset reflash the rom again and clear the caches and reboot. Which rom did you flash?
Click to expand...
Click to collapse
Hmm alright, I tried to flash 4.2.2 google edition. But the problem is now when I go into recovery my phone can't find any ROM to install.
It feels like it's broken. And I've got no adapter for the micro-SD card so I manually can put in a rom to the SD :/
I can get in to the CWM recovery but in "install zip update package -> choose ZIP from sdcard" there is nothing. So all I can do is try to get a rom into the external SD and flash from there?
juckeyy said:
Hmm alright, I tried to flash 4.2.2 google edition. But the problem is now when I go into recovery my phone can't find any ROM to install.
It feels like it's broken. And I've got no adapter for the micro-SD card so I manually can put in a rom to the SD :/
I can get in to the CWM recovery but in "install zip update package -> choose ZIP from sdcard" there is nothing. So all I can do is try to get a rom into the external SD and flash from there?
Click to expand...
Click to collapse
Yes, do that. Power down the phone, take the sdcard out and place a rom on it, boot into recovery and flash it in CWM. If that gives problems flash a stock rom in downloadmode with Odin.
juckeyy said:
Hmm alright, I tried to flash 4.2.2 google edition. But the problem is now when I go into recovery my phone can't find any ROM to install.
It feels like it's broken. And I've got no adapter for the micro-SD card so I manually can put in a rom to the SD :/
I can get in to the CWM recovery but in "install zip update package -> choose ZIP from sdcard" there is nothing. So all I can do is try to get a rom into the external SD and flash from there?
Click to expand...
Click to collapse
push rom with adb. (you must have adb file on your pc)
boot into custom recovery, connect your phone, put the rom in with adb folder, open cmd prompt in the adb folder and type:
Code:
adb devices
you must see serial number
Code:
adb push name_of_rom.zip /data/media/
or
Code:
adb push name_of_rom.zip /sdcard/
Code:
adb reboot recovery
then install the rom
samersh72 said:
push rom with adb. (you must have adb file on your pc)
boot into custom recovery, connect your phone, put the rom in with adb folder, open cmd prompt and type:
Code:
adb devices
you must see serial number
Code:
adb push name_of_rom.zip /data/media/
or
Code:
adb push name_of_rom.zip /sdcard/
Code:
adb reboot recovery
then install the rom
Click to expand...
Click to collapse
I`am out of thanks and will thank you tomorrow, wasn`t sure adb sideload worked on Samsung devices (i now it works on HTC, Sony and Nexus devices)
gee2012 said:
I`am out of thanks and will thank you tomorrow, wasn`t sure adb sideload worked on Samsung devices (i now it works on HTC, Sony and Nexus devices)
Click to expand...
Click to collapse
NVM my friend
adb commands work in custom recovery mode even if "usb debugging" is disabled.
it is just a simple push to sd :good:
EDIT: @gee2012 can you do me a favor, since i dont have my s4 with me right now, can you try if adb recognized your phone in custom recovery mode?? i just want to be sure
Code:
adb devices
thx
gee2012 said:
Yes, do that. Power down the phone, take the sdcard out and place a rom on it, boot into recovery and flash it in CWM. If that gives problems flash a stock rom in downloadmode with Odin.
Click to expand...
Click to collapse
Hmm, couldnt find my adapter. Is there no way to flash in the stock rom with odin?
samersh72 said:
push rom with adb. (you must have adb file on your pc)
boot into custom recovery, connect your phone, put the rom in with adb folder, open cmd prompt in the adb folder and type:
Code:
adb devices
you must see serial number
Code:
adb push name_of_rom.zip /data/media/
or
Code:
adb push name_of_rom.zip /sdcard/
Code:
adb reboot recovery
then install the rom
Click to expand...
Click to collapse
Hmm wow seems like a long process but i'll try it.
Thanks!
samersh72 said:
NVM my friend
adb commands work in custom recovery mode even if "usb debugging" is disabled.
it is just a simple push to sd :good:
EDIT: @gee2012 can you do me a favor, since i dont have my s4 with me right now, can you try if adb recognized your phone in custom recovery mode?? i just want to be sure
Code:
adb devices
thx
Click to expand...
Click to collapse
No bro, the device is OFFLINE. You would have checked the box first when the device was on in usb mode. Like you have to with a nexus (fingerprint).
gee2012 said:
No bro, the device is OFFLINE. You would have checked the box first when the device was on in usb mode. Like you have to with a nexus (fingerprint).
Click to expand...
Click to collapse
are you sure you are in custom recovery??
no, you need usb debugging enabled only when the OS is booted.
in custom recovery, you will see the serial number with "recovery" at the right in cmd
adb in custom recovery works fine with my SII plus
Code:
C:\Users\Samer\Desktop>adb devices
List of devices attached
014E1E761000700C recovery
C:\Users\Samer\Desktop>
thank you my friend
samersh72 said:
are you sure you are in custom recovery??
no, you need usb debugging enabled only when the OS is booted.
in custom recovery, you will see the serial number with "recovery" at the right in cmd
adb in custom recovery works fine with my SII plus
thank you my friend
Click to expand...
Click to collapse
Wait one minute bro.
samersh72 said:
are you sure you are in custom recovery??
no, you need usb debugging enabled only when the OS is booted.
in custom recovery, you will see the serial number with "recovery" at the right in cmd
adb in custom recovery works fine with my SII plus
Code:
C:\Users\Samer\Desktop>adb devices
List of devices attached
014E1E761000700C recovery
C:\Users\Samer\Desktop>
thank you my friend
Click to expand...
Click to collapse
Hey when I type in adb devies it says mine is unauthorized :/
samersh72 said:
push rom with adb. (you must have adb file on your pc)
boot into custom recovery, connect your phone, put the rom in with adb folder, open cmd prompt in the adb folder and type:
Code:
adb devices
you must see serial number
Code:
adb push name_of_rom.zip /data/media/
or
Code:
adb push name_of_rom.zip /sdcard/
Code:
adb reboot recovery
then install the rom
Click to expand...
Click to collapse
Yes, you`re right. The serialnumber is shown in recovery mode after typing adb devices in cmd. Was on stock ( + stock recovery) and not rooted.
Sorry it took so long. I have usb debugging enabled btw.
-Edit- also with usb debugging disabled the serialnumber is shown.in recovery.
juckeyy said:
Hey when I type in adb devies it says mine is unauthorized :/
Click to expand...
Click to collapse
make sure you have the right driver for samsung
you must have custom recovery and not stock recovery to be recognized by adb command
use the latest adb file version (attached)
make sure that your phone in custom recovery mode
put the rom into adb folder and open cmd in that folder
push the rom
gee2012 said:
Yes, you`re right. The serialnumber is shown in recovery mode after typing adb devices in cmd. Was on stock ( + stock recovery) and not rooted.
Sorry it took so long. I have usb debugging enabled btw.
Click to expand...
Click to collapse
+1
it will not recognize your phone in stock recovery :good:
EDIT: yes, enabling usb debugging is used only when your phone is booted in os
samersh72 said:
make sure you have the right driver for samsung
you must have custom recovery and not stock recovery to be recognized by adb command
use the latest adb file version (attached)
make sure that your phone in custom recovery mode
put the rom into adb folder and open cmd in that folder
push the rom
+1
it will not recognize your phone in stock recovery :good:
EDIT: yes, enabling usb debugging is used only when your phone is booted in os
Click to expand...
Click to collapse
I've got the right driver, my phone is in CWM recovery and rom is in the adb folder.
What do you mean with "open cmd in that folder"?
juckeyy said:
I've got the right driver, my phone is in CWM recovery and rom is in the adb folder.
What do you mean with "open cmd in that folder"?
Click to expand...
Click to collapse
open adb folder where the rom included.
"shift" + mouse right click, choose "open command window here"
download adb.zip 1.0.31 attached in my previous post, if you dont have it
samersh72 said:
open adb folder where the rom included.
"shift" + mouse right click, choose "open command window here"
download adb.zip 1.0.31 attached in my previous post, if you dont have it
Click to expand...
Click to collapse
I did still didnt work. Now I managed to get a ROM into my SD-card so now i'll boot custom recovery and try to install.
lets hope for the best!
Hey again!
Just wanna thank everybody for the help. I solved everything with flashing in stock ROM with odin.
I'll try again tomorrow with other ROM:s
Thanks, Joakim.
had same problem
hi there my s4 done the same after trying to install cy 10.1
I made a back up first with cwm
then went to install cy 10.1 rom after it said it was done I reboot and got the same problem
I took out my battery waited couple of mins and booted up in cwm mode then went to restore and installed my back up
alls working again but still have not found a fix to install custom roms.
fezz64 said:
hi there my s4 done the same after trying to install cy 10.1
I made a back up first with cwm
then went to install cy 10.1 rom after it said it was done I reboot and got the same problem
I took out my battery waited couple of mins and booted up in cwm mode then went to restore and installed my back up
alls working again but still have not found a fix to install custom roms.
Click to expand...
Click to collapse
Is it the same with other roms?
Make sure the download is not corrupted.
Wipe data, cache and dalvic after flashing the rom, reboot
sent from my Galaxy
I was installing a new ROM with TWRP and it got stuck. I can boot back into TWRP, but there is no recovery. I can connect to adb and it sees my device, but i can not get into adb shell to flash. what else can i do? At this point, i just need to flash with a different rom, but cant push or flash
zhzaen said:
I was installing a new ROM with TWRP and it got stuck. I can boot back into TWRP, but there is no recovery. I can connect to adb and it sees my device, but i can not get into adb shell to flash. what else can i do? At this point, i just need to flash with a different rom, but cant push or flash
Click to expand...
Click to collapse
What exactly is happening when you get back into recovery?
SamsungGalaxyStig said:
What exactly is happening when you get back into recovery?
Click to expand...
Click to collapse
I get to the twrp menu, but no recovery in folder.
zhzaen said:
I get to the twrp menu, but no recovery in folder.
Click to expand...
Click to collapse
Is it running a script or something? or just a blank screen?
SamsungGalaxyStig said:
Is it running a script or something? or just a blank screen?
Click to expand...
Click to collapse
i can access all menu features in twrp, but there is no recovery in the folder. if i reboot, it just gets stuck on the LG logo.
hi guys, my computer ( wins10) donset read adb device.
but i i use fastboot commands its able to list my devices, but ' adb devices' shows none listed? i am suck, might have soft brick it, able to boot into stock recocery. any suggestions?
oneplus 5 phone.
What are you trying to do?
Rhoban said:
What are you trying to do?
Click to expand...
Click to collapse
Was trying to update , but got stuck at boot screen .
Just flash the stock ROM with the stock recovery.
I can’t sideload it, “ adb not working “
Rhoban said:
Just flash the stock ROM with the stock recovery.
Click to expand...
Click to collapse
Files all courupted
With stock recovery you can't use adb sideload in windows 10.
If you're unlocked i would flash Codeworkx TWRP, download the OOS 5.0.1 Full Rom Zip, boot into TWRP, copy the zip to your phone or sideload the zip.
If you're not unlocked (and thus being unable to flash twrp) use windows 7 and sideload the zip.
You can download ADB drivers here
Can you boot? Turn on USB debugging , make sure that you allow the device when booted.
Do an advanced devices when in the OS make sure it's there.
Then you can install a TWRP recovery and do what you need to.
maikvitesse said:
With stock recovery you can't use adb sideload in windows 10.
If you're unlocked i would flash Codeworkx TWRP, download the OOS 5.0.1 Full Rom Zip, boot into TWRP, copy the zip to your phone or sideload the zip.
If you're not unlocked (and thus being unable to flash twrp) use windows 7 and sideload the zip.
You can download ADB drivers here
Click to expand...
Click to collapse
Hi bro, I am unlocked ! I mange to find a win7 pc. I ran both commands “adb devices” and “Fastboot devices”
Both shows me my devices number hence drivers are working fine.
Now do I flash twrp and sidleload? Because I can’t sideload in stock “error: *cant read zip*”. Do advice me!
PS: can boot into OS, no OS in system only recovery . USB debugging was on before boot loop happens! Thanks for all advices !
maikvitesse said:
With stock recovery you can't use adb sideload in windows 10.
If you're unlocked i would flash Codeworkx TWRP, download the OOS 5.0.1 Full Rom Zip, boot into TWRP, copy the zip to your phone or sideload the zip.
If you're not unlocked (and thus being unable to flash twrp) use windows 7 and sideload the zip.
You can download ADB drivers here
Click to expand...
Click to collapse
dladz said:
Can you boot? Turn on USB debugging , make sure that you allow the device when booted.
Do an advanced devices when in the OS make sure it's there.
Then you can install a TWRP recovery and do what you need to.
Click to expand...
Click to collapse
Hi ! USB debugging was turn on before boot loop happened. Can’t boot into OS , only recovery
lolitsryan96 said:
Hi bro, I am unlocked ! I mange to find a win7 pc. I ran both commands “adb devices” and “Fastboot devices”
Both shows me my devices number hence drivers are working fine.
Now do I flash twrp and sidleload? Because I can’t sideload in stock “error: *cant read zip*”. Do advice me!
PS: can boot into OS, no OS in system only recovery . USB debugging was on before boot loop happens! Thanks for all advices !
Click to expand...
Click to collapse
be sure your bootloader is unlocked
turn your phone into fastboot
open command prompt to the folder your twrp is in.
rename the twrp image file to recovery.img
do the following command: fastboot flash recovery recovery.img
after that boot into recovery
press adb sideload
on the computer, open command prompt to the folder where your zip file is in.
rename the rom zip file to rom.zip
do the following command: adb sideload rom.zip
done!
Thanks bro, I shall update you on the situation once I done, at work now.
Do I need to “open command promt “ at my sdk folder/plat-form tools?
maikvitesse said:
be sure your bootloader is unlocked
turn your phone into fastboot
open command prompt to the folder your twrp is in.
rename the twrp image file to recovery.img
do the following command: fastboot flash recovery recovery.img
after that boot into recovery
press adb sideload
on the computer, open command prompt to the folder where your zip file is in.
rename the rom zip file to rom.zip
do the following command: adb sideload rom.zip
done!
Click to expand...
Click to collapse
hi bro, sideload failed i think, i cant find sideload file. when the sideload end. its gave x1.00 something like that.
maikvitesse said:
be sure your bootloader is unlocked
turn your phone into fastboot
open command prompt to the folder your twrp is in.
rename the twrp image file to recovery.img
do the following command: fastboot flash recovery recovery.img
after that boot into recovery
press adb sideload
on the computer, open command prompt to the folder where your zip file is in.
rename the rom zip file to rom.zip
do the following command: adb sideload rom.zip
done!
Click to expand...
Click to collapse
attach image, successfully sideload but phone still in bootloop?
lolitsryan96 said:
attach image, successfully sideload but phone still in bootloop?
Click to expand...
Click to collapse
you need to wipe everything before flashing
maikvitesse said:
you need to wipe everything before flashing
Click to expand...
Click to collapse
just wipe, now re-sideloading. how it works. bloody nightmare dude.
maikvitesse said:
you need to wipe everything before flashing
Click to expand...
Click to collapse
still stuck at the boot loop, any advice
maikvitesse said:
you need to wipe everything before flashing
Click to expand...
Click to collapse
hi brother finally did it!
my oneplus 5 was encrypted totally forgot about hence need to wipe full back to factory stage, learn my lesson the hard way really grateful for your help!
ps; i am going to Holland on may-june for my euro trip! any places of interest in Holland?
lolitsryan96 said:
hi brother finally did it!
my oneplus 5 was encrypted totally forgot about hence need to wipe full back to factory stage, learn my lesson the hard way really grateful for your help!
ps; i am going to Holland on may-june for my euro trip! any places of interest in Holland?
Click to expand...
Click to collapse
nice good to hear!
haha, well tourists like Amsterdam so do visit that and visit The Hague/Scheveningen. I like these 3 places the most I think. Look up TripAdvisor for good attractions once you're there. do visit 'The Amsterdam Dungeon' don't miss that, I liked it very very much!
how to install the drivers?
maikvitesse said:
With stock recovery you can't use adb sideload in windows 10.
If you're unlocked i would flash Codeworkx TWRP, download the OOS 5.0.1 Full Rom Zip, boot into TWRP, copy the zip to your phone or sideload the zip.
If you're not unlocked (and thus being unable to flash twrp) use windows 7 and sideload the zip.
You can download ADB drivers here
Click to expand...
Click to collapse
Cannot adb to the phone in FASTBOOT. adb devices shows nothing when in FASTBOOT, but shows the device when in normal boot.
Hence I cannot upgrade TWRP from 3.2.1-1 to 3.2.3-0. Was trying this so to upgrade from beta23 to the beta 26, now 27 with which 3.2.1-1 seems to have problems.
A 2nd approach, just re-installing beta23 without Magisk18 gives the stock recovery which manages the beta27 install. But then I'm blocked from a Magisk18 install and still cannot use FASTBOOT mode to put TWRP back on.
Thought the adb drives could be old and sought new drivers, even assuming your link is to the most current I don't know how to get my Windows7 to use the zip file. Can you assist? This would let me put the latest TWRP, hence install Magisk18 and be rooted again!