Hey
The charger board in my Asus Padfone 2 is completely dead, because all the pins is broken! And now i searching for a new one to replace. Hope someone know where I can buy a new one or a cheap phone, where I can take it from!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It is the bottom printboard on the picture, I am missing.
/Mads
massi99 said:
Hey
The charger board in my Asus Padfone 2 is completely dead, because all the pins is broken! And now i searching for a new one to replace. Hope someone know where I can buy a new one or a cheap phone, where I can take it from!
It is the bottom printboard on the picture, I am missing.
/Mads
Click to expand...
Click to collapse
I am Having a similar issue. Let me know if you manage to find the part. thanks.
Did you try to change the plug?
feysofit said:
Did you try to change the plug?
Click to expand...
Click to collapse
Nope, too many small solder joints! Can´t simply not solder as it sits too close to each others!
It's not that hard, anyway going to a service center could be an alternative.
Lol
feysofit said:
It's not that hard, anyway going to a service center could be an alternative.
Click to expand...
Click to collapse
Lol ****, it's not that hard, okay please fix it then.
Look here:
You can't not solder it with a regular soldering iron, you need a tiny tiny iron bit!
I didn't say that is easy i said that it is not that hard. It's doable.
I assume that you don't. have proper tool. That's way i recomand you a service.
On dificulty level i whold say that from 1 to 10 it's a 6.
you try the assistance?
Get some flux. Soldered it divide the points with something steel or a razor
Sent from my R800i using xda app-developers app
If anyone still looking for this part, it can be found here!
feysofit said:
If anyone still looking for this part, it can be found here!
Click to expand...
Click to collapse
Thanks for sharing this, I've noticed their prices are higher than other suppliers but they have things in stock which is fair and convenient :good:
Unfortunately I have a missing pin in the micro USB which concludes to change the whole PCB :crying:
I have ordered in a rush part 90AT0021-R10000 but later on figured out that there is another part number that 90AT0021-R10010 and I actually have no clue what the difference here, I hope i's not a big deal thou
Broken usb port on padfone 2
feysofit said:
If anyone still looking for this part, it can be found ]!
Click to expand...
Click to collapse
Hi, I have the same broken micro usb issue on A68.
Followed your link, the product on the link is listed as
'Remote Stock' (A68 SUB_BD equal to 90AT0020-R10010).
There is a similar looking one (A68 SUB_BD equal to 90AT0021-R10000)
which is in stock. URLS to both below.
Can I order any one of these? Please help.
asusparts.eu/en/Asus-90AT0020-R10010
asusparts.eu/en/Asus-90AT0021-R10000
Thanks for your help.
---------- Post added at 12:34 AM ---------- Previous post was at 12:23 AM ----------
droidace said:
Thanks for sharing this, I've noticed their prices are higher than other suppliers but they have things in stock which is fair and convenient :good:
Unfortunately I have a missing pin in the micro USB which concludes to change the whole PCB :crying:
I have ordered in a rush part 90AT0021-R10000 but later on figured out that there is another part number that 90AT0021-R10010 and I actually have no clue what the difference here, I hope i's not a big deal thou
Click to expand...
Click to collapse
In the same situation as you were. I also see two diff products. Did it work?
tma1983 said:
Hi, I have the same broken micro usb issue on A68.
Followed your link, the product on the link is listed as
'Remote Stock' (A68 SUB_BD equal to 90AT0020-R10010).
There is a similar looking one (A68 SUB_BD equal to 90AT0021-R10000)
which is in stock. URLS to both below.
Can I order any one of these? Please help.
asusparts.eu/en/Asus-90AT0020-R10010
asusparts.eu/en/Asus-90AT0021-R10000
Thanks for your help.
---------- Post added at 12:34 AM ---------- Previous post was at 12:23 AM ----------
In the same situation as you were. I also see two diff products. Did it work?
Click to expand...
Click to collapse
So did anyone found any difference between both part numbers?
___m0d_ said:
So did anyone found any difference between both part numbers?
Click to expand...
Click to collapse
i guess they are the same, atleaset thats what the 'online chat helpdesk' guy on their website said.
I dint order it, instead got it fixed from asus service centre. It cost me 160$.
The item from the website + shipping charge will cost you nearly 120$ or more,
its better you get it fixed by asus.
I have the same problem.
Found replacement board on aliexpress.com/item/Free-shipping-charging-port-connector-USB-dock-flex-cable-For-Asus-Padfone-2-II-A68-BLue/2038766165.html
Still too expensive(
tma1983 said:
i guess they are the same, atleaset thats what the 'online chat helpdesk' guy on their website said.
I dint order it, instead got it fixed from asus service centre. It cost me 160$.
The item from the website + shipping charge will cost you nearly 120$ or more,
its better you get it fixed by asus.
Click to expand...
Click to collapse
Hi! I'm from Portugal and I have the same problem as all of you here....
But if you think that the service from Asus was expensive... tell me what you think about the 859$ that Asus Portugal asked me to repair the micro-usb!!!
At the website that was posted here earlier, I can by the pice by 69$... I only don't have the knowledge to replace it....
If any one knows about some tutorial or some guidelines that makes me understand how to do it without damaging the entire device, I really be gratefull!!
Hoping to get some answers...
Kisses,
Lili
Search on AliExpress for "charger flex For ASUS PadFone 2 A68 charging port connector USB dock flex cable free shipping" and resolve your problem.
I bought mine and changed, it took a week to receive.
Related
Found this website that sells spare parts incase you damaged your epic. I myself was looking for a replacement for the rim around the screen as it fell out from my hoodie pocket into the street and the rim was dented. Phone works ok but the dent is an eye sore...lol. anyways here's the link : http://www.globaldirectparts.com/Samsung-Epic-4G-Replacement-Repair-Parts-s/6425.htm
Cool. Nice find. I always try to stick with OEM much as I can.
Great find
Supposing I keep this puppy as long as I kept my HTC Vogue, this will really come in handy. Thanks for passing this one along to everyone.
neato, must keep this one
No prob guys, hope it help anyone that has isues with hardware.
Im in soo need of this part:
http://www.globaldirectparts.com/Sa...ic-4G-D700-Keyboard-Ribbon-p/smsng6085455.htm
They are completely out of stock and might not even get it ever as they said it is hard to get. Anyone know where I can get one? Please!
Ughhh why do they have a minimum order?
Also, question about the digitizer + LCD replacement. Do you only need to buy the digitizer + LCD combo or do you also need to buy the front housing too?
arashed31 said:
Ughhh why do they have a minimum order?
Also, question about the digitizer + LCD replacement. Do you only need to buy the digitizer + LCD combo or do you also need to buy the front housing too?
Click to expand...
Click to collapse
The one I ordered is seen here, http://cnn.cn/shop/samsung-epic-c-26_1118.html - I bought mine from cnn.cn about 3 months ago and it was $75, not this $120 crap, terrible.
it is the same part as your website (cnn.cn, when I ordered my screen from them, had a LOT MORE Epic4g parts). What I got in the mail was a NOT CRACKED and NOT BROKEN equivalent of my old one which is this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good find man. That thanks for posting.
Sent From My Evo Killer!!
Is there any website from where external speaker/loudspeaker replacement OEM is available, cannot find any on EBay.
digitalnirvana said:
Is there any website from where external speaker/loudspeaker replacement OEM is available, cannot find any on EBay.
Click to expand...
Click to collapse
The link in the OP has a loudspeaker for sale. A little note: if anyone believes they have a bad antenna, the loudspeaker contains part of it, replacing it has the potential to solve the issue.
Also, I'm a coporate Sprint tech. If anyone has any issues or needs advice or a helping hand with the guts of their epic, I'm always available.
Sent from my SPH-D700 using xda premium
Could someone tell me what their price on the LCD and digitizer is for the Epic? Don't have time to register atm =/
They are whole sellers so you may have to buy parts in bulk in order to get stuff from them, I see that even to create an account you need to get it "approved"
But great find man!
squshy 7 said:
The link in the OP has a loudspeaker for sale. A little note: if anyone believes they have a bad antenna, the loudspeaker contains part of it, replacing it has the potential to solve the issue.
Also, I'm a coporate Sprint tech. If anyone has any issues or needs advice or a helping hand with the guts of their epic, I'm always available.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Thanks but it requires 5 quantity purchase minimum and I only need 1 external loudspeaker. There was one selling on EBay but no longer. I am in India and bought the phone online so cannot claim warranty repairs.
Custom longth 2 models.
[UPDATE] 07/08 This one available in U.S now. Have a try to www.electroniccrap.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is the adapter the same ? & if yes who can we find it ?
I dont get it.......
What's the point of this??
xjarl said:
Customized 2pcs.
Click to expand...
Click to collapse
Title says it all
OEM
hmoobguy said:
Title says it all
Click to expand...
Click to collapse
This is the OEM one, Not Acer official adapter.
hmoobguy said:
Title says it all
Click to expand...
Click to collapse
Basically what's being said here is that we FINALLY have someone that can get us chargers specifically made for the Iconia. There is a wall charger and a 'desktop' charger (the one with the brick, like a laptop charger). The only benefit I can really see in the desktop charger is that I can use half of it in my iGo charger.
Either way it's NOT a 2 foot cable (thankfully!)
OEM??
xjarl said:
This is the OEM one, Not Acer official adapter.
Click to expand...
Click to collapse
Did you mean non-OEM? OEM stands for Original Equipment Manufacture. Acer is OEM, any other is 3rd party supplied or non-OEM.
Yes.
hmoobguy said:
Did you mean non-OEM? OEM stands for Original Equipment Manufacture. Acer is OEM, any other is 3rd party supplied or non-OEM.
Click to expand...
Click to collapse
Yes. You are right...Now I know how important to learn English. Thanks
So... where does one find this charger?
...for me, I can`t see why you can`t just get a regular household extension and just plug the charger into it
what am I missing
So how do we get one?
Sent from my A500 using Tapatalk
I finally just spliced a 6 ft wire into the factory charger. I tried the extension cord method but since the factory transformer is so close to the plug it was causing problems when hanging from the tablet off the side of my bed, it acted like a pendulum and put added stress on the small plug.
groaner said:
So how do we get one?
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
available in electroniccrap.com But don't know if the shipment to Canada..
All I see at that site is the OEM and OEM knockoff... link, please?
xjarl said:
available in electroniccrap.com But don't know if the shipment to Canada..
Click to expand...
Click to collapse
Look here. (Not allowed to post links until I make more posts)
hxxp://electroniccrap.com/store/index.php?main_page=product_info&products_id=49
And they do ship to Canada but it costs as much as the adapter. LoL
bungaboy said:
Look here. (Not allowed to post links until I make more posts)
hxxp://electroniccrap.com/store/index.php?main_page=product_info&products_id=49
And they do ship to Canada but it costs as much as the adapter. LoL
Click to expand...
Click to collapse
There is a way to get a break on the canada shipping.... just send an email or ask them
...sent from my android tablet
bungaboy said:
Look here. (Not allowed to post links until I make more posts)
hxxp://electroniccrap.com/store/index.php?main_page=product_info&products_id=49
And they do ship to Canada but it costs as much as the adapter. LoL
Click to expand...
Click to collapse
How about a link to the "desktop" (brick) charger shown in the first photo at the beginning of this thread...
Does anyone know the exact size of the power adapter if one wanted to buy a extension DC cord ? For example:
http://www.mcmelectronics.com/browse/DC-Power-Cords/0000001575
bungaboy said:
http://electroniccrap.com/store/index.php?main_page=product_info&products_id=49
Click to expand...
Click to collapse
Because this seller dont send to Norway, could anyone by this for me and send it to me in Norway? I cant even get an original one here in Norway even if i wanted to. And I want a spare just in case.
Anyone? Please?
Ramius71 said:
Because this seller dont send to Norway, could anyone by this for me and send it to me in Norway? I cant even get an original one here in Norway even if i wanted to. And I want a spare just in case.
Anyone? Please?
Click to expand...
Click to collapse
That site should be shipping internationally now
...sent from my android tablet
Hey, I think this may be my first relevant post here *excitement* Anyways, I recently got back from Europe and on the way back at the airport I saw one of these:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A Nuukey bluetooth keyboard for the iPhone; I had seen one of these before online and thought if it could be some way retrofitted onto another phone. It was a
pretty lucky find in that I was able to inspect it hands on. I thought since I had blown all my money anyways, so why not try it. Here is what I have so far:
http://www.youtube.com/watch?v=1wc9VkH9as4
(The video pretty much reiterates the what I just said)
When I get a better camera Ill post some pics.
Wow, wicked cool.
This is exactly what I was looking for, I'll be awaiting your tutorial. haha.
awesome! do you have the name of the product or model number so i can search for this on amazon?
cwburns32 said:
Wow, wicked cool.
Click to expand...
Click to collapse
+ 1 legit
Sent from my Motorola Atrix 4G MB860 using XDA Premium App
Pretty cool! Why can't they start making stuff like that more ofen for androids? I guess they change so much. Hopefully they stick with the design for the atrix for the next few years and there will be more of a market for our phones.
Am extremely interested in this. Its the one thing I missed from my old tilt.
Sent from my MB860 using XDA Premium App
Sinful Animosity said:
Am extremely interested in this. Its the one thing I missed from my old tilt.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
It's the one thing that I'm missing from my old HTC 8125 and 8525.
Ugh playing roms on those things was infinitely more fun when I had buttons to press.
Edit: Also, if anyone stumbles upon a keyboard that connects via usb rather than over Bluetooth, please share.
this is fantastic. now what you should do is pick up an extra battery cover and outfit the sliding joint to it. i wonder how hard that would be. i have been trying to figure out this exact mod for months
Main site - http://www.nuubrand.com/minikey.html
seargent007 said:
Main site - http://www.nuubrand.com/minikey.html
Click to expand...
Click to collapse
Wow... $80. That's a bit too steep for me.
I just bought one... $38 after shipping...
Bah cant post links... if you search amazon for this B004Q3PYIU it will come up...
So does it fit? Could someone please post pictures? Also, does everything work? Like EVERYTHING?
Sent from my MB860 using XDA App
pl0xn00b said:
So does it fit? Could someone please post pictures? Also, does everything work? Like EVERYTHING?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Youtube vid shows it on, slight modification necessary however. Definitely think I might do this once I have some money.
I think a USB keyboard in this form factor would be fantastic, less battery consumer, and it shouldn't be so hard with the USB-host support, I'm right?
Why we don't suggest it to Nuu?
acsterf said:
I think a USB keyboard in this form factor would be fantastic, less battery consumer, and it shouldn't be so hard with the USB-host support, I'm right?
Why we don't suggest it to Nuu?
Click to expand...
Click to collapse
I kind of like this idea, plus then you could use it in places where bluetooth might be prohibited. Also makes your phone less open having bluetooth off.
LordNuminus said:
I just bought one... $38 after shipping...
Bah cant post links... if you search amazon for this B004Q3PYIU it will come up...
Click to expand...
Click to collapse
That doesn't seem so bad now. Waiting for OP to post his instructions.
i bought one for $70 for my iphone 4 but gave it away to my brother since I ditched the crapple for the atrix..never thought to keep it for the atrix..wish I did!
[m]atRix
Well it's been two days and there is some bad news after sliding it back and forth the springs gave out and there is too much pressure being put on the slide plate causing it to bend. I'm going to have to modify how its mounted before releasing instructions; I dont want anyone wasting their time or money.
jonttu said:
Well it's been two days and there is some bad news after sliding it back and forth the springs gave out and there is too much pressure being put on the slide plate causing it to bend. I'm going to have to modify how its mounted before releasing instructions; I dont want anyone wasting their time or money.
Click to expand...
Click to collapse
Well, that's reasonable! Thanks for looking out for us!
A friend has a X5 with a broken screen. Do you guys know where I can find a supplier to buy a replacement screen?
Sent from my GT-I9100 using Tapatalk
Is it the digitizer or the LCD? I was able to get a new digitizer with the metal frame for about US$50 from ebay.
I've been meaning to post a guide on how to disassemble the u8800 as well but haven't gotten around to it. I should get that finished and post it up soon.
stockwell said:
Is it the digitizer or the LCD? I was able to get a new digitizer with the metal frame for about US$50 from ebay.
I've been meaning to post a guide on how to disassemble the u8800 as well but haven't gotten around to it. I should get that finished and post it up soon.
Click to expand...
Click to collapse
What's the difference from the digitizer and the lcd?!
I only see one big crack on the screen, leading to 3 other branch-like cracks!
Screen works, but sometimes registers touches on it's own, and one part on the very side (where the big crack is) is completely unresponsive!
stockwell said:
Is it the digitizer or the LCD? I was able to get a new digitizer with the metal frame for about US$50 from ebay.
I've been meaning to post a guide on how to disassemble the u8800 as well but haven't gotten around to it. I should get that finished and post it up soon.
Click to expand...
Click to collapse
Thats exactly what im looking for stockwell. Do you have a certain buyer on ebay to get them from?
I would be eternally grateful if you could post the guide on how to change the screen. What tools are required etc.
jastonas said:
What's the difference from the digitizer and the lcd?!
I only see one big crack on the screen, leading to 3 other branch-like cracks!
Screen works, but sometimes registers touches on it's own, and one part on the very side (where the big crack is) is completely unresponsive!
Click to expand...
Click to collapse
The digitizer is the glass front. The LCD is behind it.
Sent from my u8800 using XDA App
So, where can we get a replacement?
And will the photos/guide be posted?
My wife dropped hers so the glass cracked. So I'm going to buy this:
http://www.ebay.com/itm/Huawei-U880...ltDomain_0&hash=item3a669e2bda#ht_2315wt_1139
(unless someone finds a better deal).
A disassembly guide would be great
Sorry guys I've been busy with other things. I'll get the guide up asap!
Edit: http://forum.xda-developers.com/showthread.php?goto=newpost&t=1291974
It's not very thorough but it should help a bit.
Cheers Stockwell. Now to buy some tools off Dealextreme and Screen off ebay.
---------- Post added at 05:12 PM ---------- Previous post was at 05:11 PM ----------
repvik said:
My wife dropped hers so the glass cracked. So I'm going to buy this:
http://www.ebay.com/itm/Huawei-U880...ltDomain_0&hash=item3a669e2bda#ht_2315wt_1139
(unless someone finds a better deal).
A disassembly guide would be great
Click to expand...
Click to collapse
found this one repvik on ebay.
http://www.ebay.com/itm/180715382730?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_925wt_952
smiley_nz said:
found this one repvik on ebay.
http://www.ebay.com/itm/180715382730?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_925wt_952
Click to expand...
Click to collapse
Excellent, thanks. I've already got a jewellers screwdriver set with 20-something bits, what other tools is likely to be needed?
repvik said:
Excellent, thanks. I've already got a jewellers screwdriver set with 20-something bits, what other tools is likely to be needed?
Click to expand...
Click to collapse
Just remember that stupid $33 usd limit for importing goods to Norway without having to pay extra custom fee/duty. If it's more expencive you must tell the seller to mark the parcel with a lower value...
Mach III
I finally got around my friends X5. I attach a screenshot of the broken screen. It is on the outside apparently as I can feel the scratches with my hand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Are there any suggestions on what to get from ebay or elsewhere?
Thank you very much
Hello. I broke my lcd screen ( i hope it was only lcd ) and sent to the center, they wanted around 100 dollars, so on ebay i found 30 dollars and today ordered and now i am waiting for it, i hope , the true item comes and i can change it by myself..
Does anyone have any ideas where I can find replacement parts for this thing? Specifically I'm seeking the little flex board that houses the micro USB connector. It's my wife's tablet and she's hard on connectors. I've repaired several of her phones but this tablet is more obscure it seems.
I've been searching based on printing on the part and I can find a pic of it from google image using "lenovo Blade2_8" but the link to a russian website doesn't go to the part shown.
It looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL][/IMG]
Drew
this one or this search and i think you can find more
hardware manual
Thank You! I searched everywhere I could think of; not sure how I missed the eBay one, that's my goto source for most things like this.
I'm hoping that it is the bum part as the device still recognizes that a USB is plugged in momentarily. It's a $50 guess.
delawaredrew said:
Thank You! I searched everywhere I could think of; not sure how I missed the eBay one, that's my goto source for most things like this.
I'm hoping that it is the bum part as the device still recognizes that a USB is plugged in momentarily. It's a $50 guess.
Click to expand...
Click to collapse
wow... that ebay seller sure has a good margin considering the import statement found here it costs 1.5 us dollars per unit (not even 2), yet the seller is the one who makes the price, if you have someone who can buy from and send it to you from china... or some friend in russia for this one i am sure is way cheaper ... or just go to a near lenovo support service that does hw repairs and beg for it or tell them that you will pay double the price (3 usd)
you can also search for the part yourself, i just linked the fast found search results
delawaredrew said:
Does anyone have any ideas where I can find replacement parts for this thing? Specifically I'm seeking the little flex board that houses the micro USB connector. It's my wife's tablet and she's hard on connectors. I've repaired several of her phones but this tablet is more obscure it seems.
I've been searching based on printing on the part and I can find a pic of it from google image using "lenovo Blade2_8" but the link to a russian website doesn't go to the part shown.
It looks like this:
[/URL][/IMG]
Drew
Click to expand...
Click to collapse
If I were you, I would order a new USB connector and then solder it to the ribbon in place of the old one. It is tricky, but doable. Just need a fine tip soldering iron and some helping hands and a pair of tweezers. You do not want to let the ribbon cable heat up and melt. That would be the end. But, like I said, it can be done.
Sent from my SM-N910V using Tapatalk
Success!
I bought and replaced the whole part and it works, charging as normal.
The $50 price tag was steep for a part that probably cost $0.10 in China but, whatever; that's why I work . And my wife is happy now. So I'll consider it a worthy investment.
Jaytronics - I usually do OK fixing my own stuff but I've never been any good at soldering. I'm shaky on a good day and I don't get much practice. I can get it done on larger things but on something that size I'd probably bridge 2 pins or something. I thought about trying it when I failed to find the whole piece but doubt won.
Thanks for the input guys. XDA saves the day again.
Now if I can just find a root and ROM for it.... it doesn't play with Hulu well on stock ROM.
Drew