Database Users

I think I bricked my WiFi us xoom

I think u bricked it. I unlocking it and flashed a new recovery but now I'm stuck an the Motorola screen. I tried the vol down button at 3 sec but it doesn't work. Please help..
Sent from my PG86100 using Tapatalk

enyce9 said:
I think u bricked it. I unlocking it and flashed a new recovery but now I'm stuck an the Motorola screen. I tried the vol down button at 3 sec but it doesn't work. Please help..
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
If you can get there you aren't bricked.....
Sent from my Nexus S 4G using xda premium

I recovered from it. Thank god....
Sent from my PG86100 using Tapatalk

For some reason after the recovery flash and reboot I hit vol down after 3 seconds but never could get into the recovery. It would say nvflash.
Sent from my PG86100 using Tapatalk

[Q] I cant root my Zte Blade, please help

Can somebody help me, its freaking hard
My phone:
Zte Blade
Android-version: 2.3.5
I`ve tried following root softwares:
Androot: I get Failed ! ~~~ Fu goo ~~~
Z4Root: I get to where it says acquiring root shell, then it closes
Unlock Root: I cant download ABD drivers
Superoneclick: Gets to stage 7 then it says superonclick (not answering)
I so want to root it looks so smooth, please help me... thx

@OP,Have you tried rooting via ADB or fastboot?
I have the same question even though its not a practical problem for me because I've seen a couple of people having problems rooting their Blades that have 2.3Gingerbread sold with them or upgraded to it.
Sent from my LT26i using xda premium

Man i had exacly same problem today! i think the whole forums know that.
I did a tpt. I downloaded a GEN3 V.2 tpt and downloaded and puted it on Sd root and turned off my cellphone and hold volume+ + menu + power on.
Then i got CWM on. without any ROM. So i installed Cyanogenmod i had no signal. SO i installed 2.3.5.bin. and now am on the start.

MrKiller2010 said:
Man i had exacly same problem today! i think the whole forums know that.
I did a tpt. I downloaded a GEN3 V.2 tpt and downloaded and puted it on Sd root and turned off my cellphone and hold volume+ + menu + power on.
Then i got CWM on. without any ROM. So i installed Cyanogenmod i had no signal. SO i installed 2.3.5.bin. and now am on the start.
Click to expand...
Click to collapse
So finally you succeeded in rooting?
Sent from my LT26i using xda premium

karthiknr said:
@OP,Have you tried rooting via ADB or fastboot?
I have the same question even though its not a practical problem for me because I've seen a couple of people having problems rooting their Blades that have 2.3Gingerbread sold with them or upgraded to it.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Yeah but i couldnt get any of them to work...
Sent from my ZTE-BLADE using xda premium

for those who aren't able to root their device
give this a try
http://androidos.in/2011/12/root-android-phone-unlock-root-one-click-solution/

MrKiller2010 said:
Man i had exacly same problem today! i think the whole forums know that.
I did a tpt. I downloaded a GEN3 V.2 tpt and downloaded and puted it on Sd root and turned off my cellphone and hold volume+ + menu + power on.
Then i got CWM on. without any ROM. So i installed Cyanogenmod i had no signal. SO i installed 2.3.5.bin. and now am on the start.
Click to expand...
Click to collapse
You need a gen2 tpt... either gen2 v2a or gen2 stock from here... http://amphoras.co.uk/index.php/downloads/blade-tpts#g2v2a or tpt helper app. you'll need the stock version to be able to install ics roms.

How do I know what gen i have?

warrip said:
How do I know what gen i have?
Click to expand...
Click to collapse
Use the Ask Mr.PigFish app from play store.
Sent from my LT26i using xda premium

karthiknr said:
Use the Ask Mr.PigFish app from play store.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Thx, i have a gen 2 sold with 2.2 buts now 2.3.5 what do i need to do?
Sent from my ZTE-BLADE using xda premium

Make a tpt, download the tpt helper from play store and download GEN 2 Stock tpt and do a tpt.

MrKiller2010 said:
Make a tpt, download the tpt helper from play store and download GEN 2 Stock tpt and do a tpt.
Click to expand...
Click to collapse
How do i make tpt?
Sent from my ZTE-BLADE using xda premium

warrip said:
How do i make tpt?
Sent from my ZTE-BLADE using xda premium
Click to expand...
Click to collapse
After you download the TPT Helper app,you can choose your own sizes for the 3 partitions,system,data and cache and then follow the TPT procedure.. Search for TPT in the Blade forums.. You'll find a guide.. Its tough for me to link you to one,I'm not on my PC..
Sent from my LT26i using xda premium

Or when you are done installing tpt helper open it and press all in one and choose GEN 2 stock and let it download it and that **** after when says its finisched turn off ure zte blade and start it with holdinh vol + and menu button. When thats finshed it will start into clockworkmod. Tell me when u are there!!!!
Sent from my ZTE-BLADE using xda premium

Me2
Why do all phones have to be different!?
On Sony Xperia Arc S I had to do a lot of stuff before I could flash a ROM
but on ZTE Skate I only had to put the ROM I wanted on the SD card and then just download TPT Helper from Play Store and then reboot in CWM recovery!
I'm trying to help my friend root his ZTE Blade but it's so hard and there's so much to know about the phone before you begin like Baseband, what GEN it is and what build number it has!
I thought the TPT Helper was for ZTE Blade too but I can't find any good Guide here on XDA or on MoDaCo!

[Q] Help Needed Urgently

I have bricked my idea blade(india branded zte blade) while i was trying to unlock ram using tpt method .when i am restarting my mobile, some irregular lines appear at the andoid logo and stops at that point. i am new to android and hence i need your help for unbricking my phone.....thanks in advance

Which tpt method u was using. Provide more details
Sent from my Blade using xda app-developers app

venkin304 said:
I have bricked my idea blade(india branded zte blade) while i was trying to unlock ram using tpt method .when i am restarting my mobile, some irregular lines appear at the andoid logo and stops at that point. i am new to android and hence i need your help for unbricking my phone.....thanks in advance
Click to expand...
Click to collapse
Reinstall the original rom via the windows installer.
You can find instructions and the needed files on the zte website.
Skickat från min Blade via Tapatalk 2

Jinxxed said:
Reinstall the original rom via the windows installer.
You can find instructions and the needed files on the zte website.
Skickat från min Blade via Tapatalk 2
Click to expand...
Click to collapse
Thanks for your reply..can you give me the link for the original rom and the instructions to install it..because i dont know more about windows installer....thanks once again...

Jinxxed said:
Reinstall the original rom via the windows installer.
You can find instructions and the needed files on the zte website.
Skickat från min Blade via Tapatalk 2
Click to expand...
Click to collapse
i have copied image.bin file into sd card and when i pressed vol+ +menu+power button ,it is going to recovery ....
and when i restart my phone after this ..it always enter into recovery (without pressing any keys).....what to do to get my mobile working????
And I need a clarification about this image.bin file....what is the use of this file????

U HV flashed the tpt. Now download whichever ROM n gapps into our SD card and flash it from recovery.
Sent from my Blade using xda app-developers app

keviv77 said:
U HV flashed the tpt. Now download whichever ROM n gapps into our SD card and flash it from recovery.
Sent from my Blade using xda app-developers app
Click to expand...
Click to collapse
Even though i have installed a rom...its going into recovery when i restrt my mobile..

venkin304 said:
Even though i have installed a rom...its going into recovery when i restrt my mobile..
Click to expand...
Click to collapse
Which ROM? N how much r or system partitions?
Sent from my Blade using xda app-developers app

Nv flash won't detect tablet k1

Nvflash will not find my tablet can any one point me to the right thread there is nothing stickied
Sent from my HTC One S using xda premium

maek_it_happen said:
Nvflash will not find my tablet can any one point me to the right thread there is nothing stickied
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Are you in APX mode? If not power off your device then hold Volume (-) + Power. The device screen should stay black but the home button light should turn on. If you are already in APX mode have you installed the nvflash drivers. If not put your device in APX mode then plug it in your computer and installed them. They can be found in rom op normally. Hope this help you.

I have the driver files ... how do I male sure there installed
Sent from my HTC One S using xda premium

maek_it_happen said:
I have the driver files ... how do I male sure there installed
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
When you connect it while being in APX mode it shoud be detected as APX in your icon tray or as NVIDIA USB Boot-recovery driver for Mobile devices into device manager. But you can reinstall them if in doubt it will only overwrite them. Also, I've did a mistake in the previous post, APX mode is VOL(-) + VOL(+) + POWER.

Im in apx mode ......to install them I run a batch file ? I forgot how I rooted this thing over a year ago ....thanks for your help
Sent from my HTC One S using xda premium

maek_it_happen said:
Im in apx mode ......to install them I run a batch file ? I forgot how I rooted this thing over a year ago ....thanks for your help
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Plug in your device while in APX mode. Go into device manager. Find your device and open it. Go into the drivers tab. Click on update the drivers. A window will promt, in it, click on find drivers on my computer. It will ask you the path to the drivers so select where you uncompressed the drivers and it should install. Enjoy flashing new rom!

ti-pich said:
Plug in your device while in APX mode. Go into device manager. Find your device and open it. Go into the drivers tab. Click on update the drivers. A window will promt, in it, click on find drivers on my computer. It will ask you the path to the drivers so select where you uncompressed the drivers and it should install. Enjoy flashing new rom!
Click to expand...
Click to collapse
Thanks I'm trying to flash the job ROM but its taking forever in nv flash like 3 hours and counting ....hopefully when I wake up its magically done
Sent from my HTC One S using xda premium

maek_it_happen said:
Thanks I'm trying to flash the job ROM but its taking forever in nv flash like 3 hours and counting ....hopefully when I wake up its magically done
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
3 hours to flash a rom! It take me about 10 minutes or less normally.

ti-pich said:
3 hours to flash a rom! It take me about 10 minutes or less normally.
Click to expand...
Click to collapse
It flashes boot and recovery fine but system it always pauses and resumes
Sent from my HTC One S using xda premium

Its keeps stopping at 24641536 bytes out of 419430400
Sent from my HTC One S using xda premium

maek_it_happen said:
Its keeps stopping at 24641536 bytes out of 419430400
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
That's weird. Wich rom are you trying to flash? Also, maybe you could try to redownload your rom, sometime it get corrupt while downloading or unpacking.

I tried the one I had flashed a year ago
Its seems I might have to send it in
Sent from my HTC One S using xda premium

maek_it_happen said:
I tried the one I had flashed a year ago
Its seems I might have to send it in
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
So this is probably honeycomb 3.2.1 ? I think you should try krook1's CM10 rom. This is jellybean and it run way better than stock honeycomb. You can check it right here: http://forum.xda-developers.com/showthread.php?t=1825176. I really recommend you this rom as it is the more recent and bug free version. You simply use the nvflash version to start then you go into cwm and you flash the most up to date wich is v6.1 for now. Instruction and download are in the link.

This is what I tried
Sent from my HTC One S using xda premium

maek_it_happen said:
This is what I tried
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Maybe you could try this one: http://forum.xda-developers.com/showthread.php?t=1842262 and then use cwm to flash krook1's jellybean v6.1

downgrading lg l7 p705 from 4.1.2 to 4.0.3

i have a lg l7 p705 4.1.2 and cant find a way of rooting it. so i am thinking of downgrading it back to 4.0.3, if possible. i am new to this thing and has never rooted a device. would appreciate if you can suggest me a way in a simpler language cause i did saw somethings for what i was looking for but couldnt understand what they were trying to tell

hi man ^^ go here: http://forum.xda-developers.com/showthread.php?t=2423376&highlight=downgrade
then click on the link and download the v10k rom (v10k is 4.0.3) and simply flash it using kdz flasher
after the installation you will have 4.0.3 with root and cwm recovery
but remember this: if,after the installation,the phone doesn't boot remove battery then put in the battery and enter in recovery mode,now wipe data and wipe cache and reboot your phone
is really simple

seriosly...you made very simple thanx a lot...one more thing..what does flashing mean and how do i enter recobery mode...it would be really helpful of u :thumbup:
Sent from my LG-P705 using xda app-developers app

for flashing i mean istalling rom using kdz program and to enter recovery mode u have to shutdown the phone and keep pressed vol+,vol-,home,and power button then when u see your phone vibrates release power button but keep pressed all the other buttons until u see the recovery
Inviato dal mio LG-P700 usando Tapatalk 4

just one last thing...do i flash usin a computer or my cell and can you pkease recomend a giid tutorial on how to flash...
Sent from my LG-P705 using xda app-developers app

before flashing,, did u Try the framaroot app for rooting?? thus app works for jb versions
Sent from my LG-P700 using xda app-developers app

ArjunrambZ said:
before flashing,, did u Try the framaroot app for rooting?? thus app works for jb versions
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
I got the same problem got no luck with framaroot.. i think my only chance would be flashing using kdz
Sent from my LG-P705 using Tapatalk

hello the link is down
can someone if still have the file do upload it
i need to downgrading it to 4.0.3

Link is down
Michael_vx said:
hello the link is down
can someone if still have the file do upload it
i need to downgrading it to 4.0.3
Click to expand...
Click to collapse
I need the link 2