Galaxy S4 in china cant install google play - Galaxy S 4 Q&A, Help & Troubleshooting

Just bought S4 in china..
and... i cant install google play. after i download the apk. the apps just closed automatically..
how can i solve this prob ? is by root ? or by installing international firmware ? thanks

by posting in Q&A section ... the play store should be a part of the firmware by Samsung unless someone banned that.

munchy_cool said:
by posting in Q&A section ... the play store should be a part of the firmware by Samsung unless someone banned that.
Click to expand...
Click to collapse
hmm i guess its can be done by installing other country rom..
crossing finger on this.

Tsubasa9 said:
Just bought S4 in china..
and... i cant install google play. after i download the apk. the apps just closed automatically..
how can i solve this prob ? is by root ? or by installing international firmware ? thanks
Click to expand...
Click to collapse
damn it sucks to live in china

Will need Play framework as well to work, not just the apk. Installing another country's ROM is the solution
Sent from my GT-P7510

GT I9500 Chian
dave106 said:
Will need Play framework as well to work, not just the apk. Installing another country's ROM is the solution
Sent from my GT-P7510
Click to expand...
Click to collapse
i tried to root from all normal instructions to load CWM for GT I9500, but it never works. I even reset to factory and tried again, but no luck. Files i used were:
cofface_I9500_cwm_recovery_en_new.tar
When i go into recovery mode, its still the android standard recovery, not Clockwork.
Please help, thanks!

Stivos said:
i tried to root from all normal instructions to load CWM for GT I9500, but it never works. I even reset to factory and tried again, but no luck. Files i used were:
cofface_I9500_cwm_recovery_en_new.tar
When i go into recovery mode, its still the android standard recovery, not Clockwork.
Please help, thanks!
Click to expand...
Click to collapse
ROOTING method worked well for me, i followed the instructions of Cofface however I recall there was a trick:
You flash the new recovery .tar in ODIN and when it displays PASSED, remove the battery otherwise it will reboot and erase the modification.
Then you start up your S4 and enter the recovery mode (Volume up + Home key + Power key). It will be CWM and you can select ROOT YOUR PHONE.
Voila!
Regarding Google Play (no Google stuff are in the China stock ROM!!), after I rooted the phone I installed Root Explorer, downloaded the Google apk packages and pushed them into /system/app/ using Root Explorer. That's it, after reboot it will ask for your Gmail account and Play Store will work.
instructions: http://forum.xda-developers.com/show...php?p=31236432
Only concern for me: in Contacts, I'm not able to see the Google account so that all my Gmail contacts are synced in. Still looking for a solution to fix this.
Note: i didn't have to flash another ROM, I kept the one that comes with China Unicom (I9500ZCUAMDF)

Tsubasa9 said:
the apps just closed automatically..
Click to expand...
Click to collapse
Try this:
Root ,
and
copy <<data/app/com.android.vending-1.apk>> to <<system/app>> and rename to "Vending.apk",then restart your device.

Are you sure you got a legit s4? I know there are already clones in existence.
Sent from my Galaxy S IV

Nope. The paranoid junta that runs the place are deathly afraid of ideas, and by extension, truth. They missed the lesson about sticks and stones breaking bones, but words never hurting I guess. I'm curious if the Play Store, and all goog services are firewalled after you get it installed?

Can you explain to me how to root and send google apk packages?
lavive said:
ROOTING method worked well for me, i followed the instructions of Cofface however I recall there was a trick:
You flash the new recovery .tar in ODIN and when it displays PASSED, remove the battery otherwise it will reboot and erase the modification.
Then you start up your S4 and enter the recovery mode (Volume up + Home key + Power key). It will be CWM and you can select ROOT YOUR PHONE.
Voila!
Regarding Google Play (no Google stuff are in the China stock ROM!!), after I rooted the phone I installed Root Explorer, downloaded the Google apk packages and pushed them into /system/app/ using Root Explorer. That's it, after reboot it will ask for your Gmail account and Play Store will work.
instructions: http://forum.xda-developers.com/show...php?p=31236432
Only concern for me: in Contacts, I'm not able to see the Google account so that all my Gmail contacts are synced in. Still looking for a solution to fix this.
Note: i didn't have to flash another ROM, I kept the one that comes with China Unicom (I9500ZCUAMDF)
Click to expand...
Click to collapse
Hi, I'm living at china and i just got a new Gt I9500. Can you explain to me how to root GT I9500 and can you send me Googld apk packages please? Thank you.:crying:

Sysko: ) said:
Hi, I'm living at china and i just got a new Gt I9500. Can you explain to me how to root GT I9500 and can you send me Googld apk packages please? Thank you.:crying:
Click to expand...
Click to collapse
why don't you just flash other country's rom? it's better.
loading Google apk packages sometimes not working well.
---------- Post added at 07:45 PM ---------- Previous post was at 07:41 PM ----------
cellegg said:
why don't you just flash other country's rom? it's better.
loading Google apk packages sometimes not working well.
Click to expand...
Click to collapse
one more thing, the GT i9500? you mean CHINA MOBILE i9508? you need exact model number, i9508 is different from i9500

lavive said:
ROOTING method worked well for me, i followed the instructions of Cofface however I recall there was a trick:
You flash the new recovery .tar in ODIN and when it displays PASSED, remove the battery otherwise it will reboot and erase the modification.
Then you start up your S4 and enter the recovery mode (Volume up + Home key + Power key). It will be CWM and you can select ROOT YOUR PHONE.
Voila!
Regarding Google Play (no Google stuff are in the China stock ROM!!), after I rooted the phone I installed Root Explorer, downloaded the Google apk packages and pushed them into /system/app/ using Root Explorer. That's it, after reboot it will ask for your Gmail account and Play Store will work.
instructions: http://forum.xda-developers.com/show...php?p=31236432
Only concern for me: in Contacts, I'm not able to see the Google account so that all my Gmail contacts are synced in. Still looking for a solution to fix this.
Note: i didn't have to flash another ROM, I kept the one that comes with China Unicom (I9500ZCUAMDF)
Click to expand...
Click to collapse
Thanks for the advice, can anyone confirm this manipulation?

help
@laviva,
hi i got the same problem with my S4 I9500,if you are located in beijing could we pls get in touch to help me root mine phone too.
thanks in advance
QUOTE=lavive;41806955]ROOTING method worked well for me, i followed the instructions of Cofface however I recall there was a trick:
You flash the new recovery .tar in ODIN and when it displays PASSED, remove the battery otherwise it will reboot and erase the modification.
Then you start up your S4 and enter the recovery mode (Volume up + Home key + Power key). It will be CWM and you can select ROOT YOUR PHONE.
Voila!
Regarding Google Play (no Google stuff are in the China stock ROM!!), after I rooted the phone I insta

Related

SM-G9006V Google Play & Roms

*******************************************
AUGUST UPDATE
*******************************************
Most people are reporting that LiDroid is successful, I can confirm that it works well. I have occasionally encountered errors when installing apps from Play but they are not common or consistent. Note that when installing LiDroid the user may choose English for the language, but beware that the later Customer Service Customization menu selects the data network, thus if you live in China you should choose CHIN and not ENG at this menu. This second menu has no effect on the phones default language.
LiDroid:
http://bbs.gfan.com/forum.php?mod=viewthread&tid=7451237
Clockwork Recovery Mod:
http://bbs.gfan.com/android-7340315-1-1.html
*******************************************
ORIGINAL POST BELOW
*******************************************
This post is about the G9006v which is the China Unicom version of the Galaxy S5. Here are links to a couple roms:
This is the official version:
Original Forum Post: http://bbs.gfan.com/android-7402465-1-1.html
Download Link: http://pan.baidu.com/s/1d9VDc
password: ik2h
Note: Enter the password at the first screen. Then, use the grey button above the file, there will be a second dialogue box, again choose the grey button, not the blue one. The file will start downloading, if you're not in China it will be slow.
This is a rom that someone made based off Shohat's ROM, it includes Google Play Store:
Original Forum Post: http://bbs.gfan.com/android-7398471-1-1.html
Download: http://pan.baidu.com/s/1eQknpXg
password: hmle
Note: Enter the password at the first screen. Then, use the grey button above the file, there will be a second dialogue box, again choose the grey button, not the blue one. I flashed this rom and it seems to work fine, but changed the model number of my phone to 900F, not sure why? Also, let the google play store update services and a few other files and afterwards it seems to work just fine
How to flash?
It is downloading in my mobile through a chines application but very slowly. After download this file where will it store? And how to i flash my sm g9006v?
---------- Post added at 04:13 PM ---------- Previous post was at 04:01 PM ----------
ddxv said:
This post is about the G9006v which is the China Unicom version of the Galaxy S5. Here are links to a couple roms:
This is the official version:
Original Forum Post: http://bbs.gfan.com/android-7402465-1-1.html
Download Link: http://pan.baidu.com/s/1d9VDc
password: ik2h
Note: The two buttons above the file are for downloading, use the greyish one.
This is a rom that someone made based off Shohat's ROM, it includes Google Play Store:
Original Forum Post: http://bbs.gfan.com/android-7398471-1-1.html
Download: http://pan.baidu.com/s/1eQknpXg
password: hmle
Note: Again, use the grey button, not the blue one. I flashed this rom and it seems to work fine, but changed the model number of my phone to 900F, not sure why? Also, let the google play store update services and a few other files and afterwards it seems to work just fine
Click to expand...
Click to collapse
Waiting for your reply.....
ornobohornish said:
It is downloading in my mobile through a chines application but very slowly. After download this file where will it store? And how to i flash my sm g9006v?
---------- Post added at 04:13 PM ---------- Previous post was at 04:01 PM ----------
Waiting for your reply.....
Click to expand...
Click to collapse
You don't have to use the Baidu downloader, just press the GREY button BOTH times. =D
As far as how to flash, it's just like any other ROM. FYI, Shohat said he is working on making his version support the 6V so keep an eye out.
link does not working
http://pan.baidu.com/s/1eQknpXg
this link not working
ornobohornish said:
http://pan.baidu.com/s/1eQknpXg
this link not working
Click to expand...
Click to collapse
It is still working.
The first dialogue box, with a space to enter text, is for the password, though if you enter it once you won't have to subsequent times you visit the page.
If you're not in China, Baidu loads super slow. If it's too slow to download the 1GB file then you'll just have to wait for Shohat's rom next week. Should be better anyways. =D
ddxv said:
It is still working.
The first dialogue box, with a space to enter text, is for the password, though if you enter it once you won't have to subsequent times you visit the page.
If you're not in China, Baidu loads super slow. If it's too slow to download the 1GB file then you'll just have to wait for Shohat's rom next week. Should be better anyways. =D
Click to expand...
Click to collapse
Using this ROM should decrease the differences between the Chinese version and the "western" one, am I right?
Elbretzel said:
Using this ROM should decrease the differences between the Chinese version and the "western" one, am I right?
Click to expand...
Click to collapse
Your question makes me think you might want to read a bit on what ROM is (don't worry, I don't reallly know either, but we can always learn more), but ultimately yes, this ROM contains some of the Google services not included in the China Unicom version.
Please be careful and understand that this a temporary fix, this ROM is a bit buggy. Keep an eye out for other XDA roms that will work for 9006V models. You will certainly want to flash something new later.
Nice job of putting it all together in one shot. Still haven't quite done it on my phone, but will be doing it soon. Maybe I'll wait for a ROM until the one you mention by Shohat comes along. Really would like if we could get some english developer love too. I know there are things available in chinese, those alone should have like 90% of the work done for those wanting to do a version for english.
cwm recovery for SM-G9006V?
Dear Sir, after trying whole day and night I am able to download the the rom which include play store. but it is a Zip file.to flash this zip file I need to install cwm recovery on my SM-G9006V.
how to install cwm recovery on SM-G900V?
please give me the link!
ornobohornish said:
Dear Sir, after trying whole day and night I am able to download the the rom which include play store. but it is a Zip file.to flash this zip file I need to install cwm recovery on my SM-G9006V.
how to install cwm recovery on SM-G900V?
please give me the link!
Click to expand...
Click to collapse
I used this post:
http://bbs.gfan.com/android-7340315-1-1.html
BUT:
I think that the only thing that really helped me was having the drivers, which I got through the long way, by installing 豌豆荚 on my computer and it automatically installed drivers. Windows couldn't find them. I've seen the drivers on that forum listed above, so if you don't want to install that app (it is kinda annoying, but helps sideload APKs).
One other thing to note:
I also got really thrown off by one part of the above instructions, to enter CWM after you flash it with Odin you need to press Vol+ + Home + Power, not volume down.
I also got really thrown off by one part of the above instructions, to enter CWM after you flash it with Odin you need to press Vol+ + Home + Power, not volume down.
Click to expand...
Click to collapse
SOLVED
I was NOT pulling the battery immediately after odin popped off the restart. pulled battery and usb and then booted directly into recovery and worked just fine. I am now in the CWM recovery... now if only I spoke chinese....
Queueyou said:
SOLVED
I was NOT pulling the battery immediately after odin popped off the restart. pulled battery and usb and then booted directly into recovery and worked just fine. I am now in the CWM recovery... now if only I spoke chinese....
Click to expand...
Click to collapse
Ok.... for english speakers....
Once you are in CWM recovery after yanking the battery last second and loading recovery on the next boot cycle (or you have to do it all again)... You will be presented with options... crazy options... select the first one, then select the second option (it says some english about install-recovery.sh). This will disable the recovery script that keeps writing samsung's recovery over your fresh CWM. Then I chose the 2nd option again after that, thinking it meant something about rooting the phone. Not sure, but the phone rebooted and everything was fine. CWM still intact.
After that, I installed supersu as linked on the chinese website shown previously. you can see english for ZIP and from there see ext.storage or internal, just point to were you downloaded it and click through to install.
I downloaded a copy of gapps for 4.4.2 and did the same thing as I did for supersu and BAM.... now I have google play and it's working.... Finally the phone i was wanting it to be, at least until a fully english rom becomes available.
ddxv said:
As far as how to flash, it's just like any other ROM.
Click to expand...
Click to collapse
I must be missing something here. I finally downloaded this file from the second link, which is called 'Samsung_S5_G9006V.zip'.
I ran Odin v.3.09 to flash this ROM (just like any other ROM), and obviously it doesn't recognise this file, as it's a zip file. So I extracted it to a folder. However, all I get is a lot of folders such as 'data', 'META-INF', 'system', 'tmp', 'tools' and two files 'check_data_app' and 'romconfig.xml'.
Odin also doesn't recognise this, as it's looking for .tar or .md5 or .smd or .gz or .tgz file extensions.
I've tried renaming the original zip file to .tar.md5 but this doesn't work either.
Could you please explain further, or even step-by-step exactly how you are supposed to flash this ROM? What software do I actually need to flash it?
AlfCheesey said:
I must be missing something here. I finally downloaded this file from the second link, which is called 'Samsung_S5_G9006V.zip'.
I ran Odin v.3.09 to flash this ROM (just like any other ROM), and obviously it doesn't recognise this file, as it's a zip file. So I extracted it to a folder. However, all I get is a lot of folders such as 'data', 'META-INF', 'system', 'tmp', 'tools' and two files 'check_data_app' and 'romconfig.xml'.
Odin also doesn't recognise this, as it's looking for .tar or .md5 or .smd or .gz or .tgz file extensions.
I've tried renaming the original zip file to .tar.md5 but this doesn't work either.
Could you please explain further, or even step-by-step exactly how you are supposed to flash this ROM? What software do I actually need to flash it?
Click to expand...
Click to collapse
ROMs are .zip and installed via Recovery. You can use ODIN to put recovery on your phone. Clockwork Recovery Mod (CWM), TWRP are both recoveries.
Once recovery is on your phone you can enter it using the volume+ / power / home keys.
If you're still unclear on this process just look at any of the roms in the dev sections, they all include a short how to for installing a rom from recovery.
Thanks ddxv, and sorry for being stupid - all my previous phones I simply flashed from within Windows using ODIN.
So step-by-step guide should be as below?
1. Download Clockwork Recovery Mod (CWM)
2. Download ODIN 3.09
3. Download 'Samsung_S5_G9006V.zip' from your second link
4. Copy 'Samsung_S5_G9006V.zip' to a MicroSD card and place into phone.
5. Reboot phone into Download Mode
6. Start ODIN
7. Click on 'AP' (was 'PDA') and find CWM recovery file
8. click Start
9. Once finished, the 'Pass' message will be displayed.
10. Reboot into recovery mode
11. Choose Wipe Data/factory rest
12. Select install zip from SD card
13. Flash phone
14. Reboot
AlfCheesey said:
Thanks ddxv, and sorry for being stupid - all my previous phones I simply flashed from within Windows using ODIN.
So step-by-step guide should be as below?
1. Download Clockwork Recovery Mod (CWM)
2. Download ODIN 3.09
3. Download 'Samsung_S5_G9006V.zip' from your second link
4. Copy 'Samsung_S5_G9006V.zip' to a MicroSD card and place into phone.
5. Reboot phone into Download Mode
6. Start ODIN
7. Click on 'PA' (was 'PDA') and find CWM recovery file
8. click Start
9. Once finished, the 'Pass' message will be displayed.
10. Reboot into recovery mode
11. Choose Wipe Data/factory rest
12. Select install zip from SD card
13. Flash phone
14. Reboot
Click to expand...
Click to collapse
Usually people say you need to wipe data / factory reset, wipe dalvik cache and wipe (system?) cache.
VPN Troubles
Anyone running the google play rom have vpn problems?
jpijiu said:
Anyone running the google play rom have vpn problems?
Click to expand...
Click to collapse
My VyprVPNs connect but there isn't really any data sent afterwards. My StrongVPN account works occasionally. Neither are as good as on the computer. Make sure you're using PPTP, StrongVPN recommends unchecking the encryption as it's 'buggy' or something.
Also, Liantong/China Unicom in Beijing seems to constantly change connections, which naturally disconnects the VPN.
ddxv said:
My VyprVPNs connect but there isn't really any data sent afterwards. My StrongVPN account works occasionally. Neither are as good as on the computer. Make sure you're using PPTP, StrongVPN recommends unchecking the encryption as it's 'buggy' or something.
Also, Liantong/China Unicom in Beijing seems to constantly change connections, which naturally disconnects the VPN.
Click to expand...
Click to collapse
I've tried setting up both PPTP and L2TP/IPSec PSK connections, both fail immediately when trying to connect. The Astrill client app fails horribly. It's unable to link libraries ("libstlport_shared.so" is too small to be an ELF executable). It worked on the stock rom...
jpijiu said:
I've tried setting up both PPTP and L2TP/IPSec PSK connections, both fail immediately when trying to connect. The Astrill client app fails horribly. It's unable to link libraries ("libstlport_shared.so" is too small to be an ELF executable). It worked on the stock rom...
Click to expand...
Click to collapse
Yeah, the original rom this is based on was an older / original version of Shohat's rom.
There are now dozens of roms on the chinese sites, no doubt a fairshare are from xda, but probably less buggy than the one you chose
More Roms:
http://bbs.gfan.com/forum-1443-type-10173.html

Hard Brick: PLEASE HELP -> SOLVED !

I tried to install custom recovery file provided fom a youtube video for my LG G2 D802 international version (cant post the link cause i am new, but the youtube user name is Phone Tech Kid, the video is titled: "LG G2: How To Install Custom Recovery (Easy Method)"
Here is a screenshot with the error message (simply copy and paste in your browser):
s14.directupload.net/images/140506/ii7j2kgp.png
The problem is that after successfully installing the recovery file i cant even go into recovery mode on reboot anymore. The phone is bricked :crying:
I didnt pay attention that the video is from 11.2013 and my device had the 4.4.2 KitKat from end ot March, seems that has caused the brick.
PLEASE help
Android-rocks said:
I tried to install custom recovery file provided fom a youtube video for my LG G2 D802 international version (cant post the link cause i am new, but the youtube user name is Phone Tech Kid, the video is titled: "LG G2: How To Install Custom Recovery (Easy Method)"
Here is a screenshot with the error message (simply copy and paste in your browser):
s14.directupload.net/images/140506/ii7j2kgp.png
The problem is that after successfully installing the recovery file i cant even go into recovery mode on reboot anymore. The phone is bricked :crying:
I didnt pay attention that the video is from 11.2013 and my device had the 4.4.2 KitKat from end ot March, seems that has caused the brick.
PLEASE help
Click to expand...
Click to collapse
that video is outdated and would never work on kitkat if you want custom recovery and can still boot into your phone(android os) then try AutoRec it is the easiest/only way to get recovery on kit kat
XxZombiePikachu said:
that video is outdated and would never work on kitkat if you want custom recovery and can still boot into your phone(android os) then try AutoRec it is the easiest/only way to get recovery on kit kat
Click to expand...
Click to collapse
Thank you, thanks a lot. I hear you with the AutoRec. But how i can get it on the phone while i cant boot the phone.. I cant even get into recovery mode I got only the error message (from the first post) for a several seconds, then the screen goes blank, black that is?
Android-rocks said:
Thank you, thanks a lot. I hear you with the AutoRec. But how i can get it on the phone while i cant boot the phone? I cant even get into recovery mode I got only the error message (from the first post) for a several seconds, then the screen goes blank, black that is?
Click to expand...
Click to collapse
can you get into download mode if so use back to stock guide to recover your phone
XxZombiePikachu said:
that video is outdated and would never work on kitkat if you want custom recovery and can still boot into your phone(android os) then try AutoRec it is the easiest/only way to get recovery on kit kat
Click to expand...
Click to collapse
XxZombiePikachu said:
can you get into download mode if so use back to stock guide to recover your phone
Click to expand...
Click to collapse
Yes i used the power+volume up button combination and it went in download mode, than the screen changed and showed "Firmware update" beneath it: "Do not unplug the USB connection until the prcess is complete." Is this the donwload mode?
The link with the recovery back to stock ROM seems complicated with lot of steps. Can i instead go for a google edition rom (such as EHNDROIX V) instead of the stock ROM at this stage?
Android-rocks said:
Yes i used the power+volume up button combination and it went in download mode, than the screen changed and showed "Firmware update" beneath it: "Do not unplug the USB connection until the prcess is complete." Is this the donwload mode?
The link with the recovery back to stock ROM seems complicated with lot of steps. Can i instead go for a google edition rom (such as EHNDROIX V) instead of the stock ROM at this stage?
Click to expand...
Click to collapse
yes that's download mode and that is not like flashing a rom through recovery that is the only way to get your phone back to working condition and method 3 is a batch file which does it all for you
XxZombiePikachu said:
yes that's download mode and that is not like flashing a rom through recovery that is the only way to get your phone back to working condition and method 3 is a batch file which does it all for you
Click to expand...
Click to collapse
Thanks a ton for helping me.
I guess i need to accomplish those 3 steps:
1.2). Firmware Files HERE! KitKat 4.4.2 Firmwares
1.3). Download R&D FlashTool (offline fix) & LGMOBILEAX: HERE & HERE
1.4).Download Drivers - Click Here
Than Method 3 from the link you provided.
How do i do it exactly? Drivers i have already installed the rom is downloded. Step 1.3 is not clear how it works togehter with Method 3?
Android-rocks said:
Thanks a ton for helping me.
I guess i need to accomplish those 3 steps:
1.2). Firmware Files HERE! KitKat 4.4.2 Firmwares
1.3). Download R&D FlashTool (offline fix) & LGMOBILEAX: HERE & HERE
1.4).Download Drivers - Click Here
Than Method 3 from the link you provided.
How do i do it exactly? Drivers i have already installed the rom is downloded. Step 1.3 is not clear how it works togehter with Method 3?
Click to expand...
Click to collapse
after you install the r&d tool and lgmobilelax you just have to run the batch in method 3 and everything should be done automatically
XxZombiePikachu said:
after you install the r&d tool and lgmobilelax you just have to run the batch in method 3 and everything should be done automatically
Click to expand...
Click to collapse
my dear god, it worked :laugh::laugh::laugh: everything is there !!!! thank you thank you thabk you !
Now i want to install a custom google like ROM something like EHNDROIX V. What do i do so i dont go in to troubles again ? The devices returned to be not rooted, guess that comes first. Than maybe custom recovery suitable for 4.4.2?
Android-rocks said:
my dear god, it worked :laugh::laugh::laugh: everything is there !!!! thank you thank you thabk you !
Now i want to install a custom google like ROM something like EHNDROIX V. What do i do so i dont go in to troubles again ? The devices returned to be not rooted, guess that comes first. Than maybe custom recovery suitable for 4.4.2?
Click to expand...
Click to collapse
sorry I am repairing a desktop, for root use ioroot25 and for recovery AutoRec as for endroix give me a couple minutes to look into the rom and see if you need anything special before flashing
---------- Post added at 04:22 PM ---------- Previous post was at 04:11 PM ----------
Android-rocks said:
my dear god, it worked :laugh::laugh::laugh: everything is there !!!! thank you thank you thabk you !
Now i want to install a custom google like ROM something like EHNDROIX V. What do i do so i dont go in to troubles again ? The devices returned to be not rooted, guess that comes first. Than maybe custom recovery suitable for 4.4.2?
Click to expand...
Click to collapse
ok for flashing rom download d802 modem and rom, then flash the modem then the rom or flash rom and then modem it's up to you and reboot you should have endroix installed and rotation/other stuff should also work
XxZombiePikachu said:
sorry I am repairing a desktop, for root use ioroot25 and for recovery AutoRec as for endroix give me a couple minutes to look into the rom and see if you need anything special before flashing
---------- Post added at 04:22 PM ---------- Previous post was at 04:11 PM ----------
ok for flashing rom download d802 modem and rom, then flash the modem then the rom or flash rom and then modem it's up to you and reboot you should have endroix installed and rotation/other stuff should also work
Click to expand...
Click to collapse
Thank you, thanks a lot.
Rooting worked, checked it afterwards with an root check app.
Also installed the AutoRec successfully with the apk file, i did run it after inszallation and everything. But i want to test it whether it is there, how can i check it? I held the power+down keys but its an white screen: "Factory hard reset" below it: "Permanently Erase user Data & Reset settings?" and below this: "Press power key to confirm, and any other key to cancel". Seems not like recovery with a lot of options touch buttons and things. How can i check for correct installation of the AutoRec?
Android-rocks said:
Thank you, thanks a lot.
Rooting worked, checked it afterwards with an root check app.
Also installed the AutoRec successfully with the apk file, i did run it after inszallation and everything. But i want to test it whether it is there, how can i check it? I held the power+down keys but its an white screen: "Factory hard reset" below it: "Permanently Erase user Data & Reset settings?" and below this: "Press power key to confirm, and any other key to cancel". Seems not like recovery with a lot of options touch buttons and things. How can i check for correct installation of the AutoRec?
Click to expand...
Click to collapse
oh to confirm if custom recovery installed correctly on the factory reset screen click power button 3 times and it should boot into custom recovery or download an app from playstore like rom manager and use the option reboot into recovery
XxZombiePikachu said:
oh to confirm if custom recovery installed correctly on the factory reset screen click power button 3 times and it should boot into custom recovery or download an app from playstore like rom manager and use the option reboot into recovery
Click to expand...
Click to collapse
Is this the way with 3 times power press and the place from where how i flash the modem, the rom and the rom apps?
Android-rocks said:
Is this the way with 3 times power press and the place from where how i flash the modem, the rom and the rom apps?
Click to expand...
Click to collapse
you boot into custom recovery by turning phone off then hold volume down+power it will show factory reset screen then press power button three times and it should boot into custom recovery from there you wipe data/dalvik/cache then flash modem/rom/gapps and reboot
thrust heuralt
XxZombiePikachu said:
you boot into custom recovery by turning phone off then hold volume down+power it will show factory reset screen then press power button three times and it should boot into custom recovery from there you wipe data/dalvik/cache then flash modem/rom/gapps and reboot
Click to expand...
Click to collapse
Thank you dear XxZombiePikachu! It worked all fantastic, the new google rom as well :victory::victory:
I also did, as suggested from the modem thread, also EFS backup before doing the modem update. The thread for this is:
http://forum.xda-developers.com/showthread.php?t=2451390
All worked very nice And after all i didnt ditched the bricked LG Thank you thanks once again! It is good to be here!
Android-rocks said:
Thank you dear XxZombiePikachu! It worked all fantastic, the new google rom as well :victory::victory:
I also did, as suggested from the modem thread, also EFS backup before doing the modem update. The thread for this is:
http://forum.xda-developers.com/showthread.php?t=2451390
All worked very nice And after all i didnt ditched the bricked LG Thank you thanks once again! It is good to be here!
Click to expand...
Click to collapse
Don't forget to edit thread name to say solved and glad I could help
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
XxZombiePikachu said:
Don't forget to edit thread name to say solved and glad I could help
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
Click to expand...
Click to collapse
I am sorry i tried but couldnt figure out, how can be the title changed?
Android-rocks said:
I am sorry i tried but couldnt figure out, how can be the title changed?
Click to expand...
Click to collapse
edit the title of the first post and it will change the name of the thread
XxZombiePikachu said:
edit the title of the first post and it will change the name of the thread
Click to expand...
Click to collapse
I tried by editing the pot but couldnt figure out where to edit the title of the first post, how do you do that?
Android-rocks said:
I tried by editing the pot but couldnt figure out where to edit the title of the first post, how do you do that?
Click to expand...
Click to collapse
Click on edit/delete on your first post, click on advanced and you should be able to edit title there
Sent from my LG-D800 running stock kk, rooted with philz using XDA app

[Q] china n9100 how to add Google contact sync.

Hi all,
I have rooted the china 9100 and also installed Google play into the China phone. But I cannot find a way to add Google contact and sync my contact in.
Can anyone advise? Thanks in advance.
obeydatdog said:
Hi all,
I have rooted the china 9100 and also installed Google play into the China phone. But I cannot find a way to add Google contact and sync my contact in.
Can anyone advise? Thanks in advance.
Click to expand...
Click to collapse
Do you mean import your contacts to your device?
Hi,
Yes. When I go into the call function, there is no Google account for me to chose for importing and syncing my contact.
It seems to me,you must install all Google service package because It doesnt work in china(network).so they uninstall all Google service package.
First: you must download the package.
http://pan.baidu.com/s/1o6JoIT0
then you rename it in English.
Second: put them on your SD card.
Third: power off your phone,and then enter Recovery Mode(volume up+home+power key)
Fourth: select the ZIP file that you renamed It.
OK,PLZ waiting for install them!
Hope that will help you
Sent from my SM-N910V using XDA Free mobile app
hi,
i tried, but it state E:footer is wrong and E:signature verification failed. any clue? thanks alot
can i check, i had done the following to root and install google play store. it is correct. did i miss any steps?
1. odin3.07
2. CF-Auto-Root-trltechn-trlteduoszc-smn9100.tar.md5 download using odin
3. install in-phone this com.muzhiwan.gsfinstaller_54608eb12e587.apk
then i start installing google apps, but i cannot install google+ app. it said my version is incompatible.
obeydatdog said:
can i check, i had done the following to root and install google play store. it is correct. did i miss any steps?
1. odin3.07
2. CF-Auto-Root-trltechn-trlteduoszc-smn9100.tar.md5 download using odin
3. install in-phone this com.muzhiwan.gsfinstaller_54608eb12e587.apk
then i start installing google apps, but i cannot install google+ app. it said my version is incompatible.
Click to expand...
Click to collapse
Not what I did.
I did the CF-Auto root through ODIN,
then I did the recovery through ODIN (mine is the N9108v)
then flashed the GAPPS 4.4.* through that recovery.
obeydatdog said:
can i check, i had done the following to root and install google play store. it is correct. did i miss any steps?
1. odin3.07
2. CF-Auto-Root-trltechn-trlteduoszc-smn9100.tar.md5 download using odin
3. install in-phone this com.muzhiwan.gsfinstaller_54608eb12e587.apk
then i start installing google apps, but i cannot install google+ app. it said my version is incompatible.
Click to expand...
Click to collapse
I'm sorry to that.i don't know why you install failed.but you want use google app with China phone,you must install google service.even though you install google APK complete,you can't open or use it.
so will you try this link?
pan.baidu.com/s/12571j
this is an other google service pakage.ZiP
Hope can help you!
Sent from my SM-N910V using XDA Free mobile app
Thanks for the info. I will try later in the evening.
May I know how to install the Cwm recovery? I have download it. How do install the image file?
obeydatdog said:
Thanks for the info. I will try later in the evening.
May I know how to install the Cwm recovery? I have download it. How do install the image file?
Click to expand...
Click to collapse
you can use ODIN tool,and select the recovery in PDA.and then click the STARTbutton.before install it,your phone must enter into Download mode(volume down+home+power key!)
Sent from my SM-N910V using XDA Free mobile app
thanks everyone. i got it now.
everything is all set. thanks again pals.
Trying to install GAPPS on SM-N9100
I have a Chinese Samsung SM-N9100 (Ver. 5.1.1). I have rooted it and I am getting an error when attempting to install "gapps-511-base-20160514-1-signed.zip" from recovery mode. The phone boots all the way back into a fully functional OS. Below is the error I am getting.
E: failed to verify the whole-file signature
E: signature verification failed
Any suggestions on where I should begin?

Please help for SM G9280 version for root,recovery and installing google stuff !

Hello Guys,
i tried rooting my SM G9280 with no succes with chainfire cf autoroot and with root found on baidu for this version but no success too and even changing odin version i can t get the s6 edge+ sm G9280 rooted .
in this version too built for chineese ,there is no google play store so i tried installing the stuf google play store with webview and other google files and always no succes.
anyone experienced this an found a solution or working root and recovery or succeded installing google play store?
your help is very appreciated,if you have any idea please don t hesitate .
Thank you in advance for your help.
Follow the steps in the post number 15. It works perfectly. I did it last week
http://forum.xda-developers.com/s6-edge-plus/help/please-advice-google-play-store-t3204463/page2
hi pplux, you can tell me how doing? the last week,I broken my head with the sm-g9280 and nothing.
I tried in the post number 15 and don't have neither root neither recovery
plase can help me with yours steps?
and sorry for my bad english
thanks see you
pplux said:
Follow the steps in the post number 15. It works perfectly. I did it last week
http://forum.xda-developers.com/s6-edge-plus/help/please-advice-google-play-store-t3204463/page2
Click to expand...
Click to collapse
Can someone advise which firmware version this works with? I can't get it to work, it continues to brick. For what it's worth, I have rooted with Chainfire on OK6, but I have not been able to replace the boot loader with any of the TWRP or PHILZ recovery. And I still cannot get Google Play Services working properly - it has been sporadic, and sometimes the new play store will work, though other apps that rely on play services won't work at all (like Google Photos or even HBO Go).
I'm about to try updating to PB1 and doing Chainfire again...
https://www.dropbox.com/s/9q3v3s7qv00zjyt/G9280ZCU2AOJ9_G9280CHC2AOJ9_CHC.zip?dl=0
I uploaded the firmware version that worked for me in my dropbox. I hope it can help you- Tell me if it works.
Regards
pplux said:
https://www.dropbox.com/s/9q3v3s7qv00zjyt/G9280ZCU2AOJ9_G9280CHC2AOJ9_CHC.zip?dl=0
I uploaded the firmware version that worked for me in my dropbox. I hope it can help you- Tell me if it works.
Regards
Click to expand...
Click to collapse
Thanks - I think this is the last version that works with TWRP. I ended up having to un-tar the K6 firmware recovery re-tar and flash that by itself, then had to do a full wipe and flash the K6 back again. That at least has me to the original starting point, and I can use CF-Auto-Root to root and then try to install GAPPS. I had edited many of the CSC files and further deleted apps and files from the system and subfolders, which got me very close to running seamlessly, and then this... Luckily I backed up those edited files to use again.
I may try working with J9 so that I can use TWRP though - are there significant differences from J9 to K6?
mangus99 said:
Thanks - I think this is the last version that works with TWRP. I ended up having to un-tar the K6 firmware recovery re-tar and flash that by itself, then had to do a full wipe and flash the K6 back again. That at least has me to the original starting point, and I can use CF-Auto-Root to root and then try to install GAPPS. I had edited many of the CSC files and further deleted apps and files from the system and subfolders, which got me very close to running seamlessly, and then this... Luckily I backed up those edited files to use again.
I may try working with J9 so that I can use TWRP though - are there significant differences from J9 to K6?
Click to expand...
Click to collapse
I didn´t use TWRP I used Philz recovery.
I Don´t now the differences between j9 and k6? sorry if I can´t hep u .
I´ll delete the file from dropbox in a few weeks If anyone need to download, please do it quickly.
pplux said:
I didn´t use TWRP I used Philz recovery.
I Don´t now the differences between j9 and k6? sorry if I can´t hep u .
I´ll delete the file from dropbox in a few weeks If anyone need to download, please do it quickly.
Click to expand...
Click to collapse
Thanks - I downloaded the firmware file, can you tell me which Philz version you're using? The one I've found is the arter97-recovery-g928fcig-11.0-philz_touch_6.59.0.tar.md5 version. I also have g9280_root_5.1.1.tar file, arter97-kernel-g928fcig-3.6, 6.0 and 11.0 versions, and boot.img and recovery.img files of unknown origin (perhaps from the JuanC/mega file package?). I *think* that boot.img is the kernel file referenced in post #15 and the recovery.img file is the philz bootloader referenced. I have so many Gapps zips at this point I'm not sure which came with JuanC's package. I've also seen folks drop the three Google files into priv-apps, change the permissions, wipe dalvik and reboot. But so far I haven't been able to get any to run Google services without problems (usually the recurring "Google play services has stopped" failures).
Hey guys, im JuanC who actually posted the steps at #15 to root the G9280.
After a lot of people asked the same, please note that those steps only work for me with the OJ9 software, ive tried with OK6 and APB1 but none of those seem to work properly. Im still looking for the root file for the newest sofwares but sadly i coulnt find any by now. Ive got that root file from a chinese page, it is hard cause needed to translate every single post, so im doing the same almost once at week with any result.
Once i get a new one, i will let you all know it.
http://totallybasedreviews.com/root-g9280zcu2apb1-sm-g9280-sm-g9280-android-11518/
Android 6.0.1
Were you able to get this working with Android 6.0.1?
I installed the 6.0.1 firmware, then rooted with Odin. Then I installed TWRP, loaded the GAPP files from your post #15 onto the phone and then installed it via TWRP.
This worked for a view minutes, then Google Play service starts crashing.
Did you have any luck?
SpiritualWarrior said:
Hello Guys,
i tried rooting my SM G9280 with no succes with chainfire cf autoroot and with root found on baidu for this version but no success too and even changing odin version i can t get the s6 edge+ sm G9280 rooted .
in this version too built for chineese ,there is no google play store so i tried installing the stuf google play store with webview and other google files and always no succes.
anyone experienced this an found a solution or working root and recovery or succeded installing google play store?
your help is very appreciated,if you have any idea please don t hesitate .
Thank you in advance for your help.
Click to expand...
Click to collapse
你好
或许 你可以尝试一下 先刷 你手机对应型号的 recovery ,接着在twrp刷supersu zip
正常情况是可以的,
真的不行就把kernel换了

Help !! *Bricked S10+ Andriod 9.0*

So, I had a rooted S10+ , using Magisk root. Running andriod 9.0, Recently i used an app from google store to put an installed apk file into /system/apps, And then I reeboted voila, The mobile keeps bootlooping into the screen where it says "Samsung galaxy s10+ Secured by Knox, " and the light of the screen dims,... And Restarts after a while.
I AM ABLE TO get into RECOVERY MODE. Tried Wiping data and Cache.
I TRIED GOING INTO DOWNLOAD MODE. BUT it doesnt work. Tried inserting the Cable, powering off via Recovery and then Tried Vol Down + Bixby +Power,
Everything, But wont go into Download mode.
I do know a little about rooting and stuff .. I mean i can use Odin .. I have the firmwares for the device, Is there a way to Install the Firmware using sd card? or like What do i do next? IM Literally Panicking.. I mean the device is pretty new and expensive XD.
Im gonna leave it for the night to i guess drain out of battery.. Please help. What should i do next.
Please Help, I just know this forums ive been here since idk joined it back then.. Please i need help from someone or ima literally die of heart attack
[U$AMA said:
*;81748367]So, I had a rooted S10+ , using Magisk root. Running andriod 9.0, Recently i used an app from google store to put an installed apk file into /system/apps, And then I reeboted voila, The mobile keeps bootlooping into the screen where it says "Samsung galaxy s10+ Secured by Knox, " and the light of the screen dims,... And Restarts after a while.
I AM ABLE TO get into RECOVERY MODE. Tried Wiping data and Cache.
I TRIED GOING INTO DOWNLOAD MODE. BUT it doesnt work. Tried inserting the Cable, powering off via Recovery and then Tried Vol Down + Bixby +Power,
Everything, But wont go into Download mode.
I do know a little about rooting and stuff .. I mean i can use Odin .. I have the firmwares for the device, Is there a way to Install the Firmware using sd card? or like What do i do next? IM Literally Panicking.. I mean the device is pretty new and expensive XD.
Im gonna leave it for the night to i guess drain out of battery.. Please help. What should i do next.
Please Help, I just know this forums ive been here since idk joined it back then.. Please i need help from someone or ima literally die of heart attack
Click to expand...
Click to collapse
Well let's try two things
If your data is important to you try to install custom ROM via TWRP
And if not try to reset factory from TWRP
I don't think that you BRICKED! your phone
It only causes from flashing wrong model firmware
And I think the best way is install custom ROM(do a full wipe)(see completely clear tutorial videos to install it right)and after system booted you can install stock ROM again
---------- Post added at 05:10 AM ---------- Previous post was at 05:07 AM ----------
If all the things go wrong
At if your completely know that you BRICKED it(that I don't think) you can easily request debrick.img and install it from SD card
So be relax dude
It would be great experience for you to save your phone
[U$AMA]* said:
So, I had a rooted S10+
Click to expand...
Click to collapse
amirizad_7436 said:
---------- Post added at 05:10 AM ---------- Previous post was at 05:07 AM ----------
Click to expand...
Click to collapse
Hi Mate
What app did you install?
Did you try the advice from amirizad_7436 ?
[U$AMA]* said:
So, I had a rooted S10+ , using Magisk root. Running andriod 9.0, Recently i used an app from google store to put an installed apk file into /system/apps, And then I reeboted voila, The mobile keeps bootlooping into the screen where it says "Samsung galaxy s10+ Secured by Knox, " and the light of the screen dims,... And Restarts after a while.
I AM ABLE TO get into RECOVERY MODE. Tried Wiping data and Cache.
I TRIED GOING INTO DOWNLOAD MODE. BUT it doesnt work. Tried inserting the Cable, powering off via Recovery and then Tried Vol Down + Bixby +Power,
Everything, But wont go into Download mode.
I do know a little about rooting and stuff .. I mean i can use Odin .. I have the firmwares for the device, Is there a way to Install the Firmware using sd card? or like What do i do next? IM Literally Panicking.. I mean the device is pretty new and expensive XD.
Im gonna leave it for the night to i guess drain out of battery.. Please help. What should i do next.
Please Help, I just know this forums ive been here since idk joined it back then.. Please i need help from someone or ima literally die of heart attack
Click to expand...
Click to collapse
I assume that you must have installed magisk module like app systemizer or any other like that to convert system app?
Just have to uninstall certain module from twrp using twrp file manager. Reboot it will boot.
OR
You can use read my thread in guide section " upgrade downgrade without losing data" i mentioned in detail and also some links to ready magisk patched firmwares.
New Weird ****
So Thank you so much for replying, It gave me hope , I went to a Fixit guy, He I HAVE TOTALLY NO IDEA What he did,
Since i couldnt reach Download Mode, I got him to fix it, now ...
I am running my phone. Everything looks good, The warning of root at the start disappeared and the software starts normally.
There is 1 issue. I am still unable to run samsung secure folder (type apps , i think its because i did once root the phone), Secondly.
I updated my Phone to the new Andriod version and it bricked again ? (got restored by the same guy again), So like , can someone tell me what might be causing this ?
Should i Enable Debug, Go download mode and Reinstall the Original Firmware that I patched before with magisk? like (I compared the Baseband version and Build Version of the new installed software its not same as my original phone ? Maybe this is causing it not to software update? )
I dunno The Sideefffects of once rooting the phone? I mean can i ever get the old default non rooted phone back? I hope you someone understands what im trying to ask ? Like Should i Default firmware it ? or just keep using it ? will i gain something? like Will i be able to update the software?
(NOTE: I dont need root anymore . Im done with it.)
[U$AMA]* said:
So Thank you so much for replying, It gave me hope , I went to a Fixit guy, He I HAVE TOTALLY NO IDEA What he did,
Since i couldnt reach Download Mode, I got him to fix it, now ...
I am running my phone. Everything looks good, The warning of root at the start disappeared and the software starts normally.
There is 1 issue. I am still unable to run samsung secure folder (type apps , i think its because i did once root the phone), Secondly.
I updated my Phone to the new Andriod version and it bricked again ? (got restored by the same guy again), So like , can someone tell me what might be causing this ?
Should i Enable Debug, Go download mode and Reinstall the Original Firmware that I patched before with magisk? like (I compared the Baseband version and Build Version of the new installed software its not same as my original phone ? Maybe this is causing it not to software update? )
I dunno The Sideefffects of once rooting the phone? I mean can i ever get the old default non rooted phone back? I hope you someone understands what im trying to ask ? Like Should i Default firmware it ? or just keep using it ? will i gain something? like Will i be able to update the software?
(NOTE: I dont need root anymore . Im done with it.)
Click to expand...
Click to collapse
Once rooted, secure folder will not work anymore. If you are using Android 9 then use custom ROM because there is fixes there for Secure Folder. If on Android 10 then forget about it and wait until dev fix.
And for other questions, it sounds like you are newbie and didn't know anything about it until now. I would suggest to read some article here, explore about some magisk that what its, Bootloader ... how to unlock Bootloader etc. Trust me one day you will become dev. Good Luck
What i am asking is, I think something is wrong. I cant use Netflix , It was working before (when rooted), So i want to know, Should i Use ODIN to Put my Original (UNPATCHED) Firmware in this phone?
And If i do agree to proceed, (My Boot loader is unlocked permanently btw in developer options),
I just have to put it on download, connect pc open odin add the original files and run it ? and when start wipe data and cache. is that is ? Am i missing something can you please confirm sir? and these files only right?
"AP, BL, CP and CSC (I also have HOME file should i also attach that?)
Can you recommend me a tutorial to follow via odin, Restoring my Original Firmware back ? In s10+ please? Ill be grateful to you.

Categories

Resources