Database Users

Busted Outer Glass of LCD

Well I dropped my G1 the other day and it busted the outer glass part. The LCD is fine and it still works perfect. I have looked everywhere,with no luck of finding any parts for them. So I called HTC and they told me 150-250 to replace the glass!! So I was wondering if any one know anyone that does G1 Repair or if anyone know of another phone that has more ava. parts for it with a 3.17" Screen? Any help is greatly appreciated.

Nope, I got AT&T. Was thinking of taking apart the phone and getting the glass measurements and having a custom cut piece of glass.

i believe its a special type of glass

Pretty much stuck buying the glass from HTC on this one ...sorry
PS... it is glass

iphone 3g - Dream lcd
I read that the same screen is in use on the iphone 3g, I doubt its true they probably meant type or sumthin, maybe worth a check...
on the old palm pdas you could replace just the glass if the layer under it isn't damaged, this may no longer be possible with these screens, once the bigtime flashing begins there will be lots of bricks available pretty cheap, maybe you should keep an eye out for somebody who pooched the dev bootloader install then after you convince them they killed it you could buy it maybe for less than the HTC price...
gotta say, that sucks if you were a tmob customer you'd have a few options...
bhang

Hello. Don't you think It's weird that it happened to me too today?
I've never had a broke phone since my Nokia 8210.
Well, some idiot had placed out one of those kinds of plastic bands you use to seal packages with, a black one.
It was pitch dark and I fell as the plastic ring got snared around my feet. Obviously my Jabra bt3030 got pushed against the screen and it got severely cracked.
My insurance company seems to be covering the whole phone except a small sum. This was from the phone part, but I got to see if I can get something from the health insurance as I hit my head and scratched my hand (though not likely but I can always try)
The touch seems to work most of the time, though it reacts slowly but some times It's just dead.
This really sucks.
I'm dead serious when I'm talking that there was no way that the band could be seen when walking.

http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226&view=unread
Some info there.

aad4321 said:
yeah i dont think it is really even "glass" mabye its a type of plexiglass?
Click to expand...
Click to collapse
It is glass. But you can not simply cut a piece of glass to the same dimension as the touchscreen is integrated into the glass cover. So yes you will need to get a htc or aftermarket replacement part.
The interesting thing is that the repair cost you quoted is identical to the cost of the copay if you go with the Asurion device insurance T-mo offers. So device insurance would just be a waste of money at $5 a month if you end up with broken glass.

Looks like I will just have to hold onto it until aftermarket parts come out. I busted mine by letting it slip out of my hand while talking on it....then it took a 6ft fall to eventually land face first on concrete.....I didnt even wanna pick it up cause i new it was messed up and if it wasnt I was gonna call HTC and give them props! I have a ava. upgrade from AT&T Maybe get a Iphone until this one gets fixed then sale iphone on ebay for 5x wuts its worth.

The iphone's screen seems to crack pretty nice as well.
I hope changing the glass on the G1 isn't as frustrating as on the Iphone.
http://www.youtube.com/watch?v=sT7wRXeYsyg
edit:
Not directing this to the message above, just saying.

Cracked screen replacement with compatible HW from third party --when?
I cracked the LCD of my G1 after about three weeks and have noted that neither PPCTechs nor MobileKangaroo have yet acquired a source for the replacement screen.
My understanding is that HTC currently charges what one thread in another forum (http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226) quoted as "a minimum of $238.00" to make this repair.
I expect this repair to be offered soon by third parties for about $150, likely using a non-HTC screen product to replace the damaged one.
Has anyone heard any reports about forthcoming availability of such hardware? If so, then are there any non-HTC services to make the replacement?

yeah im looking for this too...i dropped mine and then proceeded to step on it day two with the phone.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
WooHoo 2 items left as of this copy paste. $80, not bad price.
Shaggy

They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy

This waht i found out
so have the same issue and this is what I found out
so from my understanding there are 2 part to the lcd the outer glass touch sensor and the inner lcd. if the the screen is just cracked and you can see the image the u have to replace both. attached are the part descriptions fromt he g1 service manual. and below is a link of a site that sells them, but for some reason they sell the touch scrren with the outer bezel making it cost more. i called htc to order just the touch sensor glass but they said the dont sell replacements, they just fix em
link

Shagman68 said:
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
Click to expand...
Click to collapse
I contacted the seller of the screen and he/she told me that It's only the screen. If the G1 cracks It's the digitizer glass that cracks first. Then if you are unlucky the screen cracks as well. I managed to only crack the digitizer glass. The screen beneath is totally fine. Unfortunately removing the glass from the digitizer plastic was very painful and I managed to wreck the flat cable of the digitizer so that's beyond repair. Now I tried to disassemble the whole phone but I got stuck at removing the housing. First I had problems with the Torx bits. I have some Torx bits in my sets but the lowest I got was T8. I had to buy a cellphone bits set with a lot of different types of bits. It had Torx all the way down to T4. The T5 and T6 was what I needed. There are 4 T5 to remove and one T6. I have inserted the sharp plastic between the housing and the top case and released all hooks but it seems the front and back part of the housing of the phone is dead stuck.
You have to open the whole damn phone from the back to get to the inside of the screen. Why the screen housing uses standard Philips is also beyond me. I have lots of bad experience with standard Philips screws. The heads always get bad after a while of screwing. I have yet to have a problem with Torx.

[Q] Which digitizer for my HD2 and where from?

I've successfully taken my HD2 apart now I'm not sure about the digitizer I need. My phone doesn't have a T-Mobile logo and it came with the leather pouch which I read means it's not the T-M version.
I'm looking for a new digitizer and the one that looks like the connector would fit says it's for the T-M version. Rather than go on about it here is a pic of my digitizer. I'm in the UK so if anybody has shopping suggestions I'd be grateful.
Ty

hypertyper said:
I've successfully taken my HD2 apart now I'm not sure about the digitizer I need. My phone doesn't have a T-Mobile logo and it came with the leather pouch which I read means it's not the T-M version.
I'm looking for a new digitizer and the one that looks like the connector would fit says it's for the T-M version. Rather than go on about it here is a pic of my digitizer. I'm in the UK so if anybody has shopping suggestions I'd be grateful.
Ty
Click to expand...
Click to collapse
I can't say too much based from picture posted above ...
It could have already replaced unbranded digitizer or it's Telstra, European, Taiwanese version... Are the call and end buttons colored on your phone (green and red respectively)?
If You have enough money, about 89-120$, better choice will be to buy a LCD+digitizer assembly also named LCM, they will work at all versions of HD2, not only T-mobile or European, I tested the LCM from European HD2 with in a T-mobile version of HD2 ant it works perfect. So go on eBay.com and buy one

Call buttons are all grey. I've though about getting the whole combo but it's more than twice the price and I'm not exactly rich so it would have been nice to just get a digitizer. I was hoping there would a way to identify properly which digitizer I need. I've sent a message to one of the suppliers on ebay. I'll see what comes out of it.
According to this article the different versions of the HD2 aren't physically the same size in terms of casing. Do the LCM units fit all the same?
pocketnow"dot"com/thought/t-mobile-hd2-vs-htc-hd2-comparison

Clarification
hypertyper said:
Call buttons are all grey. I've though about getting the whole combo but it's more than twice the price and I'm not exactly rich so it would have been nice to just get a digitizer. I was hoping there would a way to identify properly which digitizer I need. I've sent a message to one of the suppliers on ebay. I'll see what comes out of it.
According to this article the different versions of the HD2 aren't physically the same size in terms of casing. Do the LCM units fit all the same?
pocketnow"dot"com/thought/t-mobile-hd2-vs-htc-hd2-comparison
Click to expand...
Click to collapse
Let me help you:
#1.your picture is defining an uncommon/unbranded TMO(bile)US touchscreen(No doubt about, at least for me!), but grey hardware keys are for international HD2 model, probably you have a (let say) hybrid (home made)version between american(TMOUS) and international model;
#2.nevertheless, in your financial position, I'll look on ebay for an appropriate touchscreen model(there are plenty, most of them with very clear pictures like your's) for about US$30-40;
#3. if you want a combo, as far as I know(and pvii already said it) the 2 LCMs are geometrically identical, but the frame/chasis on which lay on the LCM is different(the american model is longer on 2,0-2,5mm);
#4. international model is cheaper & easier to find.
For more informations/help feel free to contact me!
Cheers!

hypertyper said:
Call buttons are all grey. I've though about getting the whole combo but it's more than twice the price and I'm not exactly rich so it would have been nice to just get a digitizer. I was hoping there would a way to identify properly which digitizer I need. I've sent a message to one of the suppliers on ebay. I'll see what comes out of it.
According to this article the different versions of the HD2 aren't physically the same size in terms of casing. Do the LCM units fit all the same?
pocketnow"dot"com/thought/t-mobile-hd2-vs-htc-hd2-comparison
Click to expand...
Click to collapse
May be it will be better if You post a photo of rear side of your display or at least say it's product number (from sticker on square copper pad, rear side), i.e. P/N:60H00300-00P is for T-Mobile and P/N:60H00295-00P is for international version.
If You don't have enough money for a european LCM combo, you can buy a LCD apart and digitizer apart, even from different sellers but you have to buy matching parts, both for European or both for T-Mobile version.

Thanks for the info guys. The serial number is the kind of solid identification that I was looking for. The serial on my screen ending in 300-00P indicates that it's the TMobile version.
My theory is that since this phone was bought when it wasn't exactly new on the market HTC had switched to the solderless screens which seem more modern?!?
I'm assuming that in terms of connection the digitisers that look like they will fit in terms of connection should work. I'm only worried about the dimensions of it since the casing of mine is smaller than the real TMobile version from what I can tell.
Since I can't find anything else on ebay I guess I'll order one of the TMobile ones and see if it fits. I'll look for a shop with return policy just in case.
Thanks for the help. If anybody has further suggestions I'd love to hear them.

[/QUOTE]I'm only worried about the dimensions of it since the casing of mine is smaller than the real TMobile version from what I can tell.
Thanks for the help. If anybody has further suggestions I'd love to hear them.[/QUOTE]
Read carefully my previous post:
you don't have to be worry, the touchscreen, lcd and lcm are geometrically (length x width) identical!

I'm only worried about the dimensions of it since the casing of mine is smaller than the real TMobile version from what I can tell.
Thanks for the help. If anybody has further suggestions I'd love to hear them.[/QUOTE]
Read carefully my previous post:
you don't have to be worry, the touchscreen, lcd and lcm are geometrically (length x width) identical![/QUOTE]
Yupp, any LCM will fit on any model of HD2.

I wasn't sure which part was identical but if the digitizers are then what I ordered should do the trick. Digitizer should arrive this week so hopefully I'll have something to report about
edit: Digitizer arrived and fits perfectly. I guess my phone was some weird mutation. Solution is to just buy a digitizer with the correct connection, job done.
Oh and getting the right tape is a total *****. I had to take everything apart again because my tape wasn't strong enough!

I thought I'd post my findings and produce some cliffnotes on how I fixed my HD2.
Firstly, if you search youtube for "leo as" and "leo dis" you will find the official HTC videos on how to assemble and dis-assemble the HD2. They make it look easier than it is. Also, they don't separate the digitizer from the screen.
I ordered the tools to "dis" off ebay. Especially the T5 screwdriver was worth getting since it allowed me to find out which digitizer I need. I have a non TMobile version but needed the TM digitizer.
I found that using an old credit card type of card works very well for taking the phone apart. It can reach further into the phone and bends rather than breaking like some of the cheap tools from ebay.
Especially for separating the digitizer and screen it's great. I heated up the digitizer & lcd combo in the oven for a couple of minutes like the video advertised for taking the middle part of the phone apart (you'll see in the vid). Here comes the interesting part: Instead of sliding the card / tool all the way across the screen (between screen and digi), it's enough to just separate it around the edges. There is no glue or adhesive in the middle. It seems obvious now but I got lots of glue all over the LCD which was a bit** to clean.
Another tip that is worth repeating is getting the cheap double sided tape from ebay which is meant for Iphone digitizers (3M branded). I got three of them for £1 incl delivery. I used it to put the "middle" of the phone together. Screen and digi I did with cheap double sided tape which is working but I regret somewhat.
Another tip would be the whit cable (flash?) which goes on the bottom of the mainboard. I put it on top to start with. It's easy to mix up. Also it makes sense to put one end on before you put down the mainboard because that way you still have proper access.
Make sure you have good tape and be patient. I had crap tape and just slammed things together because I was so keen to see if the phone still works. I had to take it all apart again which almost broke the phone because it was coming apart in all sorts of places.
Overall it's like a big, fragile puzzle. I got the phone from a family member who had dropped it so all I had to get was the digitizer and tape. Now I have the best phone that ever lived
If anybody has questions, I feel like I know the hardware of the HD2 inside out.

I also took mine apart to replace the digitizer. I haven't got the new one yet though. I also watched the take apart vid on youtube. Unlike you I didn't disconnect the white wire from under the board. As a matter of fact, I left the other wires attached to the mainboard and just disconnected them from the GPS, camera and Bluetooth boards. At the end of the little channel that the wires are in, there was a little metal tab that held the wires in place. I just bent the tab up to remove the wires. Like you I used a piece of credit card to loosen the glued pieces.

[Q] Nexus 7 Screen cracked! Questions.

Okay so it's been less than a f***ing week and I've managed to crack my Nexus 7 32GB 3G. Hell yeah. Fell on a bathroom ceramic tile from 4 foot high and the corner bit chipped off. The entire touch screen works though, it's just the corner bit cracked.
SO ANYWAYS! I have a few questions for those smart guys out there that know about displays.
First of all, I've found out from the internet, that because the LCD and the Digitiser are glued together, I'd need to buy them together. Otherwise known as a Nexus 7 Display Assembly.
Few questions:
1) If I buy a display assembly from ebay for example, will it be of less quality than ASUS's original screen, or will it probably just be a part from ASUS anyways?
2) If I do buy this display assembly, will it still have the same number of Pixels as the original screen?
3) Will it have the same brightness, same touch responsiveness, same all that **** as the original screen?
If not, I may consider just repairing directly from ASUS, so...
4) How much does it cost in pounds(£) to repair the N7 Screen all in, taking into account my shipping fees from the UK?
Seriously need someone who has any experience of this whatsoever
I'm considering if I should repair this with the 3rd party screen and sell it privately if it's not the same quality, then buy a brand new one for myself. What's your guys thoughts on this? I really need some of your expert advice

I JUST replaced the screen on my nexus. I bought the display assembly from powerbookmedic.com, and the tools I needed from iFixit.com. All in all, it cost me around $200 in the States. The repair process was pretty easy, and the screen looks and functions exactly the same as the original screen. My only suggestion would be to make sure you have some good adhesive. I have a little screen lift now because the adhesive lost its traction when I took the cracked screen off the upper casing. Good luck!
Sent from my Nexus 7 using xda app-developers app

Adhesive?
jwilkins3691 said:
I JUST replaced the screen on my nexus. I bought the display assembly from powerbookmedic.com, and the tools I needed from iFixit.com. All in all, it cost me around $200 in the States. The repair process was pretty easy, and the screen looks and functions exactly the same as the original screen. My only suggestion would be to make sure you have some good adhesive. I have a little screen lift now because the adhesive lost its traction when I took the cracked screen off the upper casing. Good luck!
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Huh? Adhesive? We have to add adhesive? I thought adhesive was only to the digitiser + the lcd screen? I thought that it already comes assembled when you buy the part, because apparently you have to buy it together? If it isn't used for digitiser/lcd screen, then what did you use adhesive for?

The digitizer is indeed fused to the glass, but the silver ring you see around your screen is also fixed to the glass with adhesive, and that part doesn't come with the LCD/digitizer assembly.
The screen affixed itself to this upper casing on mine okay, but I do have about a millimeter or so of screen lift now which I didn't have before.
Sent from my Nexus 7 using xda app-developers app

jwilkins3691 said:
The digitizer is indeed fused to the glass, but the silver ring you see around your screen is also fixed to the glass with adhesive, and that part doesn't come with the LCD/digitizer assembly.
The screen affixed itself to this upper casing on mine okay, but I do have about a millimeter or so of screen lift now which I didn't have before.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
LOL wanna do an ASUS Warranty job! LMAO!

bump
bump...

The best way to attach the new display is to use very thin two sided tape. you cut it in 1/8 inch strips. Apple it all the way around the bezel. then with a sharp knife run it along the inside bezel. Pay close attention to the thin bezel area on the left side ({where screen lift occurs) To be sure you do have it perfect in that area.. Ithe screen face down on cloth . Push the bezel onto the sticky tape (with film removed of course.. Turn device over and put back together.. LEAVING OUT THE TWO CENTER SCREWS or leave then very loose on the left side.(if you have a newer model of nexus these screws will be gone anyway). I have done many phone /tablet screens . If you can get it apart and back together you can replace the screen assembly..
No real need to send it to someone else nexus is easy to dissemble reassemble
Good Luck... Buy a full working 8 gb from ebay for 150.00 might be your best best....

Any clue How to detach the broken glass\digitazer\lcd from this aluminiun bezel?

I recently broke my screen as well. I saw on ebay only 2 options. First option is a screen only for about $50 which doesn't look like it will do anything for me. You the second option is a digitizer for around $300. $300 clearly exceeds the cost of a brand new device so that wouldn't make any sense at all. Even $200 doesn't make sense as I can buy a 8gb device for that and swap screens. I have the 16gb model. Does anyone have any cheaper sources for screen/digitizer that make economic sense?
Thanks,
Dan
Sent from my SPH-L710 using Tapatalk 2

found the replacement screen at Taobao together with instruction (written in Simplified/Handicap Chinese), it costs roughly HK$950 (i.e. US$120)
http://item.taobao.com/item.htm?id=...416_2297358_8935934:1355472362_4k4_1264543304

what the ....
unixwise said:
found the replacement screen at Taobao together with instruction (written in Simplified/Handicap Chinese), it costs roughly HK$950 (i.e. US$120)
http://item.taobao.com/item.htm?id=...416_2297358_8935934:1355472362_4k4_1264543304
Click to expand...
Click to collapse
Dude! That's all in chinese LOL! We can't even read any of that! Can you maybe provide video instructions of the buttons to click to buy the item? LOL

cheap nexus 7 16 gb
Umair166 said:
Dude! That's all in chinese LOL! We can't even read any of that! Can you maybe provide video instructions of the buttons to click to buy the item? LOL
Click to expand...
Click to collapse
i seen a add on sears outlet website nexus 7 16 gb for 179.00 I think they are returned or refurb units..
http://www.searsoutlet.com/Google-N...rh1_md&pn=1&ps=24&pid=105502&mode=buyUsedOnly

Ehh...?
erica_renee said:
i seen a add on sears outlet website nexus 7 16 gb for 179.00 I think they are returned or refurb units..
http://www.searsoutlet.com/Google-N...rh1_md&pn=1&ps=24&pid=105502&mode=buyUsedOnly
Click to expand...
Click to collapse
It seems pretty pointless to me why you posted that in response to my comment about the chinese website because
a) It was a chinese website... I just needed some help because of the language lol
b) It seems we're only interested in the screen which is what was being suggested... not the a full device like you said lol
c) Your price is $179... his price for the screen was ~$120... so even if I was to harnass only the screen in your one... I'm still at a loss.. lol
Thanks for the try though!

Actually $179 for an entire new (refurbished) nexus 7 with 16gb more storage than mine is a very tempting option. I may choose to do that vs spending almost the same to import a screen from China, have to go through the hassle of installing it myself and hopefully do it properly and have it look clean and factory. If I did that then I could still hang on to my broken one in hopes that in 6 months or so the screen prices might drop to a more reasonable price.
Sent from my SPH-L710 using Tapatalk 2

bmwguy said:
Actually $179 for an entire new (refurbished) nexus 7 with 16gb more storage than mine is a very tempting option. I may choose to do that vs spending almost the same to import a screen from China, have to go through the hassle of installing it myself and hopefully do it properly and have it look clean and factory. If I did that then I could still hang on to my broken one in hopes that in 6 months or so the screen prices might drop to a more reasonable price.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
oh. Glad it works for you! I've got a 32GB 3G model, so it's not really much help at all for me :/

hi , does nayone one know the current price asus charge for lcd replacement ?
im fully aware of cost of buying the lcds and doing myself or a second hand unit etc, but just trying to confirm the asus repair price please in the UK

looks like there are much cheaper screens/digitizers available on ebay now. anyone try replacement yet?

[GUIDE][WIP][DIY] **UPDATE! VIDEO ADDED** Nexus 4 Digitizer and LCD Replacement Guide

So ive had my Nexus 4 for about 2 weeks now and i love this phone! i recently went to Dallas with my Mom and Sister over the weekend. Upon getting to the hotel, my Nexus decides to slip out of my hand onto the concrete. When i picked it up, it had a crack on the top right corner of its face. No big deal, right? Wrong! The top half of the screen is completely unresponsive. Good thing i brought my Galaxy Nexus to hold me off through the trip. Once i settled in at the hotel, I whipped out my laptop and bought a replacement screen. I ordered from this site... http://www.etradesupply.com/oem-lg-...-assembly-with-front-housing-and-battery.html
Also, Mods, please move to appropriate forum if necessary.
Video by me- http://www.youtube.com/watch?v=BFwbaay-K6s&feature=youtu.be

http://www.ifixit.com/Teardown/Nexus+4+Teardown/11781/1
Sent from my Nexus 4 using Tapatalk 2

Judging from ifixit, it's going to be pretty hard to replace the screen. Would you mind keeping us updated on your progress here? I'm curious to see how hard it's going to be.

The glass is fused to both the display and the display frame. So don't crack the glass unless you're good with a heat gun, or you're fond of replacing the glass, display, and frame together ($$$).
Click to expand...
Click to collapse
- iFixit.
Yeah, I think it might be a bit of a challenge. Please tell us how it goes though.

i think he ordered the whole glass/screen/digitizer fused together thing, which shouldnt be as hard to replace ( i hope). Anyways, please do keep us updated.

Yeah, i ordered the entire front housing, (battery, display, digitizer, and frame) for a total of $186.72... I already have my Nexus 4 disassembled. I'm just waiting for the screen which should get here Wednesday. And yes, I will update this post as i replace the screen.
Sent from my Nexus 7 using xda premium

speedygonzo said:
Yeah, i ordered the entire front housing, (battery, display, digitizer, and frame) for a total of $186.72... I already have my Nexus 4 disassembled. I'm just waiting for the screen which should get here Wednesday. And yes, I will update this post as i replace the screen.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
At least you get a new battery too, but that' s expensive :crying:

Bump...
Sent from my Nexus 4 using xda premium

I don't think its worth buying the set for $180 and then risking doing it yourself, I sent mine to lg and they're repairing it for $140 total.. Although the price may vary based on the damage..

vikramkhalsa said:
I don't think its worth buying the set for $180 and then risking doing it yourself, I sent mine to lg and they're repairing it for $140 total.. Although the price may vary based on the damage..
Click to expand...
Click to collapse
you can get just the lcd and digitizer for 160 too, might be worth it if you dont have to ship it to LG or if it's an easy diy. There's even a b-stock lcd and digitizer for 140, the lightbleed special?

When you sent the phone to LG was it overseas or in the US? Also whats the website? thanks

neotekz said:
you can get just the lcd and digitizer for 160 too, might be worth it if you dont have to ship it to LG or if it's an easy diy. There's even a b-stock lcd and digitizer for 140, the lightbleed special?
Click to expand...
Click to collapse
i recently cracked my front display, but it still works fine. i'm looking into replacement options and i don't believe the suggested link you posted is a good choice, because the front panel + digitizer + lcd are all fuzed together and i don't have a heat gun...
http://www.etradesupply.com/oem-lg-...nd-digitizer-assembly-with-front-housing.html
this option is probably best at 120... but then i just read this on ifixit:
"The battery is stuck to the frame with a lot of adhesive, so removing it without puncturing the battery can be difficult."
so... looks like the 160 pre shipping/taxes is the best choice
*****
just as an fyi - lg is saying their repair cost is from 40-150 dollars approx... i might just go this route since it doesn't void warranty and i won't screw anything up myself

speedygonzo said:
So ive had my Nexus 4 for about 2 weeks now and i love this phone! i recently went to Dallas with my Mom and Sister over the weekend. Upon getting to the hotel, my Nexus decides to slip out of my hand onto the concrete. When i picked it up, it had a crack on the top right corner of its face. No big deal, right? Wrong! The top half of the screen is completely unresponsive. Good thing i brought my Galaxy Nexus to hold me off through the trip. Once i settled in at the hotel, I whipped out my laptop and bought a replacement screen. I ordered from this site... http://www.etradesupply.com/oem-lg-...-assembly-with-front-housing-and-battery.html
Also, Mods, please move to appropriate forum if necessary.
Video by me- http://www.youtube.com/watch?v=BFwbaay-K6s&feature=youtu.be
Click to expand...
Click to collapse
Thanks buddy,
The same happened to me. But unfortunately i'm located in India.. Is it possible to purchase this Display assembly from India..
I'm really worried..

Hi,
I'm sorry to dig out the old thread, but i'm trying to fix my N4 of similar problem but i have a question:
Is there a way to separate the LCD from the digitizer? This way i can keep the LCD and get only the digitizer to save cost as my LCD is still working perfectly. In ebay, an OEM Digitizer+LCD assembly cost USD100+ (http://www.ebay.com/itm/LCD-Touch-D...e_Replacement_Parts_Tools&hash=item3cd597ce9d) but the standalone digitizer only cost about half of it (http://www.ebay.com/itm/NEW-TOUCH-S...er_Cell_Phone_Accessories&hash=item43bf9536ff).
All the instruction that i can find so far on the internet involve replacing the entire assembly.

Battery bending under removal
I'm also sorry to have to reply to an old thread, but I am in urgent need of an answer.
I recently cracked my phone's screen. I ordered a screen+frame repair kit, and got repairing. However, when removing the battery, When prying it from the phone, I realized that the battery was soft, and my tool I was using to pry it off was actually bending it. The battery seems to be curved overall, and slightly pushed on some edges. Also, a weird "sweet" smell came from the phone. Perhaps the smell is the adhesive that sticks the battery to the phone; I do not know.
Will it be safe to use the same battery again? Or should I go ahead and purchase a new one?

Wouldn't a hair dryer work as an alternative heat gun

gravityz3r0 said:
Hi,
I'm sorry to dig out the old thread, but i'm trying to fix my N4 of similar problem but i have a question:
Is there a way to separate the LCD from the digitizer? This way i can keep the LCD and get only the digitizer to save cost as my LCD is still working perfectly. In ebay, an OEM Digitizer+LCD assembly cost USD100+ (http://www.ebay.com/itm/LCD-Touch-D...e_Replacement_Parts_Tools&hash=item3cd597ce9d) but the standalone digitizer only cost about half of it (http://www.ebay.com/itm/NEW-TOUCH-S...er_Cell_Phone_Accessories&hash=item43bf9536ff).
All the instruction that i can find so far on the internet involve replacing the entire assembly.
Click to expand...
Click to collapse
I wouldn't recommend doing so as a LCD+digitizer assembly cists around $60USD I did not think its worth seperating them but you can use a hairdryer to soften the adhesive
Sent from my SM-T310 using XDA Premium 4 mobile app
---------- Post added at 01:14 PM ---------- Previous post was at 01:12 PM ----------
jchidori said:
i recently cracked my front display, but it still works fine. i'm looking into replacement options and i don't believe the suggested link you posted is a good choice, because the front panel + digitizer + lcd are all fuzed together and i don't have a heat gun...
http://www.etradesupply.com/oem-lg-...nd-digitizer-assembly-with-front-housing.html
this option is probably best at 120... but then i just read this on ifixit:
"The battery is stuck to the frame with a lot of adhesive, so removing it without puncturing the battery can be difficult."
so... looks like the 160 pre shipping/taxes is the best choice
*****
just as an fyi - lg is saying their repair cost is from 40-150 dollars approx... i might just go this route since it doesn't void warranty and i won't screw anything up myself
Click to expand...
Click to collapse
Use a hairdryer
Sent from my SM-T310 using XDA Premium 4 mobile app

Advice: Upgrade or repair

Hey guys
Ive had my nexus 4 for a while now, bought it when it came out a few years ago now. I had managed to keep it perfectly unharmed until i unfortunately dropped it the other day which cracked the screen and seemed to have killed the touchscreen.
The touchscreen now just doesn't work at all.
So my question was, do you reckon i should buy one of those screen repair kits, or something similar and attempt to fix the phone or go for an upgrade and try my luck finding a invite ticket and buying a OnePlus One? Just wondering what your opinions are.
Im stuck now with an iPhone 3gs! Tough times indeed.

lewis03 said:
Hey guys
Ive had my nexus 4 for a while now, bought it when it came out a few years ago now. I had managed to keep it perfectly unharmed until i unfortunately dropped it the other day which cracked the screen and seemed to have killed the touchscreen.
The touchscreen now just doesn't work at all.
So my question was, do you reckon i should buy one of those screen repair kits, or something similar and attempt to fix the phone or go for an upgrade and try my luck finding a invite ticket and buying a OnePlus One? Just wondering what your opinions are.
Click to expand...
Click to collapse
Replacing the screen assembly is actually relatively easy on the Nexus 4. Note that I said screen assembly, and not the digitizer. If you don't know, the glass "screen" is called the digitizer, which is glued to the LCD behind it. Now, it could be that all that actually needs replacing is the digitizer, but this is not an easy task, requires some specialist equipment, and you're still likely to screw it up. So I highly recommend going with the screen assembly, which is both the LCD and digitizer already ready to go.
You can get a new screen assembly off eBay. There are 2 different ways. One is just the screen assembly. It's cheaper, $45, but it requires that you remove the old one from the bezel, which can be a PITA. The other way is the full front assembly, which means you're getting the screen assembly already glued in to a brand new bezel. $60, a lot less hassle, and your entire front will be new and shiny and ding/scratch free again. Obviously, this is the choice I'd recommend (I've done it myself).
Might as well get a new battery while you're at it, for $20. At this point in its life, you've likely charged your phone several hundreds of times. Li-ion batteries will lose upwards of 20% of their original capacity after ~500 "cycles".
ifixit.com has some great tear-down photos, and there's a number of guides on youtube. It might sound a bit daunting, but it's a lot easier than you might think, at least with this phone.
I can't tell you whether you should just get a new phone or not - I don't know your situation, finances, urges, etc. But I will say that for a mere $80 you will practically have a new Nexus 4. Stick around, learn how to flash custom ROMs and kernels (if you don't already), and you very much will have a new phone. Or a great back-up to your new one.
Im stuck now with an iPhone 3gs! Tough times indeed.
Click to expand...
Click to collapse
Ouch.

Planterz said:
Replacing the screen assembly is actually relatively easy on the Nexus 4. Note that I said screen assembly, and not the digitizer. If you don't know, the glass "screen" is called the digitizer, which is glued to the LCD behind it. Now, it could be that all that actually needs replacing is the digitizer, but this is not an easy task, requires some specialist equipment, and you're still likely to screw it up. So I highly recommend going with the screen assembly, which is both the LCD and digitizer already ready to go.
You can get a new screen assembly off eBay. There are 2 different ways. One is just the screen assembly. It's cheaper, $45, but it requires that you remove the old one from the bezel, which can be a PITA. The other way is the full front assembly, which means you're getting the screen assembly already glued in to a brand new bezel. $60, a lot less hassle, and your entire front will be new and shiny and ding/scratch free again. Obviously, this is the choice I'd recommend (I've done it myself).
Might as well get a new battery while you're at it, for $20. At this point in its life, you've likely charged your phone several hundreds of times. Li-ion batteries will lose upwards of 20% of their original capacity after ~500 "cycles".
ifixit.com has some great tear-down photos, and there's a number of guides on youtube. It might sound a bit daunting, but it's a lot easier than you might think, at least with this phone.
I can't tell you whether you should just get a new phone or not - I don't know your situation, finances, urges, etc. But I will say that for a mere $80 you will practically have a new Nexus 4. Stick around, learn how to flash custom ROMs and kernels (if you don't already), and you very much will have a new phone. Or a great back-up to your new one.
Ouch.
Click to expand...
Click to collapse
Thanks for the great response! I think im going to revive my Nexus 4! Or at least try to It should be fun anyway taking it all apart!
Thanks for all your help!!

lewis03 said:
Thanks for the great response! I think im going to revive my Nexus 4! Or at least try to It should be fun anyway taking it all apart!
Thanks for all your help!!
Click to expand...
Click to collapse
If you need any assistance with dis/reassembly, I'm more than happy to help. I've had my Nexus 4 apart probably a few dozen times. Most important thing is to go slowly. Don't lose screws, and don't lose the tiny rubber gasket that's part off the proximity/ambient light sensor module. If, after reassembly, your screen goes black when making a call (and it's not against your ear), take it apart again and put the rubber gasket in backwards.

I had same problem. Please not that ebay china sellers are not selling oem displays and there are huge difference in terms of quality. I myself bought original oem LG from Germany, but it costed 100$
p.s. found him http://www.ebay.de/itm/Original-LG-...284?pt=DE_Handy_PDA_Akkus&hash=item35d533c834
Stickers, numbers on chasis all looked legit.