Related
hello i just bought a nook color yestarday, and rooted it this morning succufuly, my only problem/ concern is will the root stay active in my tablet if there is a new update? i rooted the phone using a youtube vedio, everything worked good but in the vedio the person said root honeycomb? i have read that the root honeycomb isnt good? also is this stable for future use? i used nooter 4.6.16 and CWM 3.0.2.8 thanks!
Short answer: You'll want to block future OTA updates from B&N, lest they break root. You can always upgrade after you're sure everything will work with a new version.
What version of B&N firmware are you running? Are you able to download content from B&N and apps from the Android Market?
also can reformat the sd card and put it back in the nook? the files in the sd card is nooter and the 6 files of the IMG
1.2.0 device, i can download from the android market, so far angry birds, ebay, es file manager, fourshared work, i havent tried the B&N market but livewallpapers do notwork
Android311 said:
also can reformat the sd card and put it back in the nook? the files in the sd card is nooter and the 6 files of the IMG
Click to expand...
Click to collapse
You can, but it can be handy for troubleshooting and fixing things. I'd suggest a 2nd card.
Ok then ill buy a 2nd sd card thanks
Sent from my NOOKcolor using XDA App
Also how do u block updates.?
Sent from my NOOKcolor using XDA App
Is it possible to run stock nook color Rom off an sdcard while running cm7.2 kang with mirage kernel on emmc?
I know its possible to install and run other Rom off an sdcard, I was just curious. Thanks in advanced if its possible or not.
Sent from my Nook Color on CM 7.2 KANG build
brsingr said:
Is it possible to run stock nook color Rom off an sdcard while running cm7.2 kang with mirage kernel on emmc?
I know its possible to install and run other Rom off an sdcard, I was just curious. Thanks in advanced if its possible or not.
Sent from my Nook Color on CM 7.2 KANG build
Click to expand...
Click to collapse
No. I know dizzyden was working on a way to make that happen, but as far as I know, stock only works on emmc.
But you could put stock back on emmc and your Kang on SD.
Ah ok, thanks for the help
Sent from my R800x using xda app-developers app
leapinlar said:
No. I know dizzyden was working on a way to make that happen, but as far as I know, stock only works on emmc.
But you could put stock back on emmc and your Kang on SD.
Click to expand...
Click to collapse
Would it be possible to just do a cwm backup of my current Rom then restore it onto the sdcard install?
Sent from my Nook Color on CM 7.2 KANG build
brsingr said:
Would it be possible to just do a cwm backup of my current Rom then restore it onto the sdcard install?
Sent from my Nook Color on CM 7.2 KANG build
Click to expand...
Click to collapse
No. Apparently there is some code in the ROM that expects it to be on emmc. It fails if on SD.
Sent from my Nook Color running CM10 and Tapatalk.
Ok. Thanks leap
Sent from my Nook Color on CM 7.2 KANG build
Well in answer to the original poster in this thread, I now have a way to get Stock on a verygreen SD. Look at my tips thread linked in my signature and look at item B11 in the second post of that thread. You can even have rooted stock with OC and apps2SD support.
I am still working on a method of having stock on SD while still using data on /dev/block/mmcblk0p2... I have not given up... just gotten side tracked a time or two.
DizzyDen said:
I am still working on a method of having stock on SD while still using data on /dev/block/mmcblk0p2... I have not given up... just gotten side tracked a time or two.
Click to expand...
Click to collapse
Mine does that. Just had to modify the ramdisk.
Thanks for all the help and Info leap and dizzy ....ill go try it out and let you know
edit: Its been awhile since i made a sd rom....so far i have made the sdcard from This and i dont exactly understand how to do the rest of it properly, my nook color is on the cm7.2 kang build with mirage kernel and in Leap's instructions it says
leapinlar said:
So the procedure to get this working is to prepare a verygreen SD using the image file attached to my SD installation instructions thread here (generic-sdcard...). Then boot it at least once with the SD installed in the Nook so the SD can partition itself. If you have an existing verygreen SD prepared, you can skip those two steps. Copy the zip files to somewhere that recovery can find them. If you use the newest versions of CWM or TWRP recovery they can read files from emmc media storage. Boot to recovery and insert the prepared verygreen SD into the Nook. Flash the ROM zip to the SD. It will format the system and data partitions on the SD and install the ROM. Boot to the SD and the new stock ROM should load. Follow the directions to register with B&N. Once you have registered you can stop there if you are satisfied with plain stock. But be warned, if B&N decides to update to a new version in the future, it may mess up whatever you have installed on emmc. Therefore I recommend that you flash the Block Updates zip which blocks OTA updates. If you flash Manual Nooter you do not have to flash Block Updates separately since it is included in Manual Nooter. To install Block Updates, Manual Nooter or OC/apps2SD support, flash the zips to the SD with recovery just like you did the ROM. If you flash Manual Nooter, it has gapps and Market with it so you must register them with Google. And you need root if you want to the OC and apps2SD support, plus you will need a program like SetCPU to adjust the processor.
You can get the modified 1.4.3 B&N stock ROM zip here, the modified Manual Nooter zip here, the modified OC/apps2SD zip here, and the modified Block Updates zip here (all four modified for verygreen SD installation).
Click to expand...
Click to collapse
I have done the partitioning on the sdcard so it now has the 4 partitions in it....the nook is running CWM 3.2.0.1 emmc recovery. I've downloaded all 4 zip files, but i only plan on putting the stock nook, and manual nooter (leap says it includes the update blocker) on it
Sent from my R800x using xda app-developers app
You need to update your emmc recovery to a newer version so that you can flash those zips from internal memory (emmc media). You will run into problems finding the files with 3.2.0.1 since you have to take your normal SD out and put your verygreen SD in.
So flash this zip:
http://forum.xda-developers.com/showthread.php?p=23537853
Then copy the downloaded files to emmc media, boot to the new CWM and select the files from internal memory and flash them to your inserted verygreen SD.
EDIT: I just updated my instructions in my tips to make that clearer. Thanks.
leapinlar said:
You need to update your emmc recovery to a newer version so that you can flash those zips from internal memory (emmc media). You will run into problems finding the files with 3.2.0.1 since you have to take your normal SD out and put your verygreen SD in.
So flash this zip:
http://forum.xda-developers.com/showthread.php?p=23537853
Then copy the downloaded files to emmc media, boot to the new CWM and select the files from internal memory and flash them to your inserted verygreen SD.
EDIT: I just updated my instructions in my tips to make that clearer. Thanks.
Click to expand...
Click to collapse
Ok, ive put the bandn 1.4.3 rom zip onto the emmc of the nook color and the manuak nooter in the same place. Im running the cwm you linked and i can now select them, my questionnow is: when it says install zip from sdcard i scroll down and select the choose zip from internal and it finds both zips....after i booted to cwm i inserted the verygreen sdcard, how will i know the stock nook will flash to the sdcard and not the internal?
brsingr said:
Ok, ive put the bandn 1.4.3 rom zip onto the emmc of the nook color and the manuak nooter in the same place. Im running the cwm you linked and i can now select them, my questionnow is: when it says install zip from sdcard i scroll down and select the choose zip from internal and it finds both zips....after i booted to cwm i inserted the verygreen sdcard, how will i know the stock nook will flash to the sdcard and not the internal?
Click to expand...
Click to collapse
I have built in safeguards to make sure that won't happen. If no SD is in the slot, it won't flash, if the SD in the slot is not formated with 4 partitions, it won't flash. And when it finally does flash, it is hard coded to go to SD. Flash away. First ROM then a little later after you have registered and let it finish loading books, the manual nooter.
Sent from my Nook Color running CM10 and Tapatalk.
leapinlar said:
I have built in safeguards to make sure that won't happen. If no SD is in the slot, it won't flash, if the SD in the slot is not formated with 4 partitions, it won't flash. And when it finally does flash, it is hard coded to go to SD. Flash away. First ROM then a little later after you have registered and let it finish loading books, the manual nooter.
Sent from my Nook Color running CM10 and Tapatalk.
Click to expand...
Click to collapse
Works perfectly
now to go install the manual nooter
Much Thanks to Leap and Dizzy.
brsingr said:
Works perfectly
now to go install the manual nooter
Click to expand...
Click to collapse
Congratulations! You are my first user to report it working besides my own testing.
leapinlar said:
Congratulations! You are my first user to report it working besides my own testing.
Click to expand...
Click to collapse
cool ....i dont know if its normal or not but it does seem to take forever to download the books, when i wsa using the android app it didnt seem to take as long....maybe they are just have server bugs or something?
i think after the books are done downloading then ill root it.
brsingr said:
cool ....i dont know if its normal or not but it does seem to take forever to download the books, when i wsa using the android app it didnt seem to take as long....maybe they are just have server bugs or something?
i think after the books are done downloading then ill root it.
Click to expand...
Click to collapse
It took me a very long time to download the books and I have a fast connection. I think B&N just pushes them out slow for stock. Other stuff downloads fast, like once you are rooted and you download apps from play store.
leapinlar said:
It took me a very long time to download the books and I have a fast connection. I think B&N just pushes them out slow for stock. Other stuff downloads fast, like once you are rooted and you download apps from play store.
Click to expand...
Click to collapse
hmm ok, so its not just me then...thats good lol
brsingr said:
hmm ok, so its not just me then...thats good lol
Click to expand...
Click to collapse
hmm...now im having problems redownloading some books that started to download, but i turned the nook off when i went out to dinner and now i cant tell if the books that were downloading are actually continuing to download or not...would it be possible to download the books on the cm7.2 android app and then copy them over to the nook sd?
Brah....dang it...I messed up by accidently hitting the erase and deregister button.....it didn't seem to erase anything, but it did deregister it...would I have to remake the SD and then reflash the rom again? (Not that it is a big deal or time consuming to do lol)
Sent from my Nook Color on CM 7.2 KANG build
OK... I've tried to re-work my install so that I can run Jelly Bean on my NC.
It fails.
I get:
1) System preparing to shutdown (even though is should say "preparing to shut down"); or:
2) system hangs;
or:
1) "Please put on first partition of this SD card
the name should start with update-, cm, or diff_ and end with .zip"
I see CM7 installs, I see CM9 installs, and I see CM7-10 install instructions, but nothing that specifically delineates the exact steps I must follow to boot my NC into Jelly Bean via SD Card. "Well, you can replace this with that in the instructions" doesn't seem to cut it. I keep getting errors. It all seems to meld from one set on instructions to another, and it becomes unclear what direction you must go to get the results you want.
Can someone *please* update the install instructions for CM10/JellyBean for Windows, Mac, and Linux? Working with old CM7 instructions that may or may not work doesn't cut it. You're losing your audience.
Thanks!
collisionbend said:
OK... I've tried to re-work my install so that I can run Jelly Bean on my NC.
It fails.
I get:
1) System preparing to shutdown (even though is should say "preparing to shut down"); or:
2) system hangs;
or:
1) "Please put on first partition of this SD card
the name should start with update-, cm, or diff_ and end with .zip"
I see CM7 installs, I see CM9 installs, and I see CM7-10 install instructions, but nothing that specifically delineates the exact steps I must follow to boot my NC into Jelly Bean via SD Card. "Well, you can replace this with that in the instructions" doesn't seem to cut it. I keep getting errors. It all seems to meld from one set on instructions to another, and it becomes unclear what direction you must go to get the results you want.
Can someone *please* update the install instructions for CM10/JellyBean for Windows, Mac, and Linux? Working with old CM7 instructions that may or may not work doesn't cut it. You're losing your audience.
Thanks!
Click to expand...
Click to collapse
I have a new instruction thread for installing CM10 on SD linked in my signature. If you have questions about it, ask there.
Thanks for the cm10 info!
leapinlar said:
I have a new instruction thread for installing CM10 on SD linked in my signature. If you have questions about it, ask there.
Click to expand...
Click to collapse
Ahhh, yes. Found it. They helped. Thank you!
I now have Jelly Bean running on CM10 on my Nook Color. It was a bit choppy until I found the processor speed setting and ramped it up to 1000Mhz. Now it is quite sweet, even running off the SD card.
One issue: Google Play won't download the apps to the Nook - or at least I can't tell, because I can't see what's on the emmc: File Manager won't let me see off the SD card ,even in SuperUser mode. So getting apps on this thing might be a bit of a challenge. Any ideas?
collisionbend said:
Ahhh, yes. Found it. They helped. Thank you!
I now have Jelly Bean running on CM10 on my Nook Color. It was a bit choppy until I found the processor speed setting and ramped it up to 1000Mhz. Now it is quite sweet, even running off the SD card.
One issue: Google Play won't download the apps to the Nook - or at least I can't tell, because I can't see what's on the emmc: File Manager won't let me see off the SD card ,even in SuperUser mode. So getting apps on this thing might be a bit of a challenge. Any ideas?
Click to expand...
Click to collapse
Google Play Store downloads apps to /cache which is on emmc for the SD install. But they are only temporarily stored there until they are automatically installed on the SD. I'm not sure what your issue is. Are you saying they aren't installing? And on file manager, you went in the app to settings, general, and selected root?
Sent from my NookColor running CM10 on SD using Tapatalk.
leapinlar said:
Google Play Store downloads apps to /cache which is on emmc for the SD install. But they are only temporarily stored there until they are automatically installed on the SD. I'm not sure what your issue is. Are you saying they aren't installing? And on file manager, you went in the app to settings, general, and selected root?
Sent from my NookColor running CM10 on SD using Tapatalk.
Click to expand...
Click to collapse
They are not installing. Just walked into /root/, and there's virtually nothing in cache - or anywhere else, for that matter - nothing in terms of (non-cm) software or apps, at least. And Google Play didn't download them - but says they're installed. Very weird.
collisionbend said:
They are not installing. Just walked into /root/, and there's virtually nothing in cache - or anywhere else, for that matter - nothing in terms of (non-cm) software or apps, at least. And Google Play didn't download them - but says they're installed. Very weird.
Click to expand...
Click to collapse
They are not showing in your launcher? When play store has finished installing, it deletes the temporary download. Did it say 'downloading' within play store?
Can you go to /data with your file manager and create and delete a temporary file? I just want to know if your SD has become temporarily read only.
Sent from my Nook HD+ using Tapatalk
leapinlar said:
They are not showing in your launcher? When play store has finished installing, it deletes the temporary download. Did it say 'downloading' within play store?
Can you go to /data with your file manager and create and delete a temporary file? I just want to know if your SD has become temporarily read only.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
They are not showing in launcher. Play store does nothing after purchasing/re-installing an app. It never says "downloading." Nothing happens. Nada.
As a test, reading your post, I tried to create a new file in /data with the name of "testing/txt" - it was completed successfully.
I'm thinking the store has issues with my setup...
collisionbend said:
They are not showing in launcher. Play store does nothing after purchasing/re-installing an app. It never says "downloading." Nothing happens. Nada.
As a test, reading your post, I tried to create a new file in /data with the name of "testing/txt" - it was completed successfully.
I'm thinking the store has issues with my setup...
Click to expand...
Click to collapse
Something is definitely messed up. It should be working. I would recommend starting over. If you have media files already on the SD, back them up and reburn the SD and reinstall everything.
Sent from my Nook HD+ using Tapatalk
leapinlar said:
Something is definitely messed up. It should be working. I would recommend starting over. If you have media files already on the SD, back them up and reburn the SD and reinstall everything.
Click to expand...
Click to collapse
Reformatted everything. Pulled latest nightly and latest gapps package. Followed step by step, exactly as written. Still won't download new/purchased apps from Google Play. I give. Lake Erie is only 124 yards away...
collisionbend said:
Reformatted everything. Pulled latest nightly and latest gapps package. Followed step by step, exactly as written. Still won't download new/purchased apps from Google Play. I give. Lake Erie is only 124 yards away...
Click to expand...
Click to collapse
In CWM select "partition SD card" to allow apps to install. Seems your SD card size is stuck at 300mb. Happened to my 16gb Sandisk. Would not recognize over 300mb until I use CWM to partition SD card. I have full use of SD card now.
Bought a brand new Nook HD+ with the intention of using it as an inexpensive tablet in my kitchen, primarily to access the web and run cooking apps. Out of the box, I found it laggy and unresponsive to the point of being unusable.
I have some experience rooting/jailbreaking my phones, very little experience with tablets. I was eager to get KitKat on the device right away—it has proven to be so much better on my phone, much better battery life, much more responsive, less buggy, more fluid, etc. Problem is, KitKat is bleeding edge, and there are no official builds, and most of the install guides for dummies (=me) refer to earlier (JB) versions of Android.
It turned out to be quite time consuming to read all of the different versions of the install process, and to patch together a process that worked. I thought I would document what I did, in order to (possibly) save others some of the time that I invested.
Note: this process does NOT install KitKat to the SD card. In plain English, these steps install a bootable recovery image onto a micro sd card. Booting into the micro-sd recovery will allow you to wipe stock from your device and install kit-kat, google apps and an internal recovery. When you are finished, you remove the micro-SD and you have an Android tablet that boots into kitkat. If you want something different stop reading!
1) get a class 4 micro SD (class 4 seems to be the one that boots most reliably in the Nook HD+ (see this thread: http://forum.xda-developers.com/showthread.php?t=2288688&page=12 )
2) Download win32diskimager (http://sourceforge.net/projects/win32diskimager/?source=directory ) and this bootable CWM recovery image (http://nook.rootshell.ru/hd/emmc-cwm-early3.img.gz ).
3) Extract the CWM recovery image, and use win32diskimager to write the image to the micro sd.
4) Download EMMC (internal) recovery image and latest CM11 EMMC from this thread (http://forum.xda-developers.com/showthread.php?t=2600572) . You want “Ovation Recovery Image (CWM)” and “cm-11-xxxxxxx-UNOFFICIAL-ovation-emmc.zip.” All recoveries and roms for this device are called Ovation. Download Paranoid Android Google Apps from this thread (http://forum.xda-developers.com/showthread.php?t=2397942 ). MAKE SURE the version you download is for Android 4.4.x. It will say 4.4.x in the file name. I chose the Google Stock Package. (PA-Google Apps will allow you to enable ART if you want to.)
5) Turn on the Nook HD+, register it, and download all the system/firmware updates until the Google Play Store installs on your device (Google Play and Gmail etc. just recently got added to the Nook, so probably aren’t installed out of the box).
6) Transfer the three zip files (recovery image, CM11 and PA Gapps) you downloaded in step 4 onto the internal sdcard of the Nook itself. (This step is IMPORTANT: the current bootable version of CWM can ONLY read files on the internal SD, so you won’t be able to flash any roms or apps or recoveries unless they are actually on the device) I was unable to use the USB cable to transfer the files directly to the Nook from my computer—others have also had trouble getting Windows to recognize the Nook HD+ properly— and I didn’t want to spend a lot of time figuring it out, so I used the micro sd card as follows. If you can transfer directly from the computer, skip to step 7.
6a) Copy the new internal recovery, new system image and PA Google Apps from your computer to the micro SD card. Eject micro SD from computer.
6b) On the Nook, use Play Store to install a file explorer. I use Root Explorer: https://play.google.com/store/apps/details?id=com.speedsoftware.rootexplorer&hl=en . You don’t need root to copy files from external to internal SD (and you don’t have root at the moment) so you can download any file explorer you like.
6c) Insert micro SD in the Nook while the Nook is still booted/on. The nook will flash a message saying that it’s mounting the SD card. Once it does, use the file explorer to copy all zip files downloaded in step 4 from the EXTERNAL to the INTERNAL SD. The internal SD card is referred to as “sdcard” or “sdcard0” and the external SD as “ext_sdcard” or “sdcard1”.
7)Turn off nook.
8) Insert micro SD card if it isn’t in already, and turn on the device. You should see the "Nook" logo, which gets overwritten by the "cyanoboot" logo. Keep waiting. It will eventually go into CWM. If it doesn’t, go back and start reading through the thread referenced in step 1. With any luck, you won’t have trouble. I had boatloads of trouble booting from the SD card until I got a class 4 micro SD, and used the bootable image linked in step 2. Since then I can boot every time.
9) Use CWM to backup stock rom, then wipe data/factory reset. (Very good instructions on using CWM here: http://forum.xda-developers.com/showthread.php?t=2317500 ) Flash the internal recovery. Flash the CM11 Rom. Flash PA Google apps. Remove micro SD. Select “Reboot System now”.
10) When you reboot, go to Settings/About tablet/Build number. Tap on that seven times to enable developer options. Go to Settings/Developer Options and select Advanced Reboot which allows rebooting into recovery from the power button.
11) OPTIONAL: Enable ART. ART is not compatible with all applications, so you might experience problems. You can see which applications work and don’t work here: http://www.androidruntime.com/. Enabling it made a very big difference for me in terms of smoothness; others with more experience seem to achieve similar, or better effects by modding with xposed, gravitybox, etc. See: http://forum.xda-developers.com/showthread.php?t=2579945&highlight=change+and+resolution&page=24) To read more about ART and what it does see: http://www.androidpolice.com/2013/1...-in-secret-for-over-2-years-debuts-in-kitkat/. If you decide to give it a try: Settings/Developer Options/ Select Runtime/Use ART.
12) Reboot—this time will take a while because ART (if you enable it) has to reconfigure itself.
For me, the difference is night and day. I now have a tablet that runs beautifully. Many many thanks to the hard working developers who make this possible, especially Verygreen, who provided the rom and recovery, and e.mote who wrote the "for dummies" thread that helped this dummy make it through the process.
Please comment and change anything that I have garbled. My goal is to consolidate information, not mangle it!
Very good post
Thanks for the excellent post. :good:
I was running 4.4.2 different versions on emmc and sd card.
10.2 nightly is still the best for me!
Performance and battery wise.
Hi I installed the same rom over Carbon rom. I went to format my sd card and every time iI tried the Nook would reboot. I went into CWM recovery and formatted it from there but I think it formatted the internal sdcard, Could someone check this out for me as this is my first post I cant post on the developer forum. TIA Mike
Not sure what you exactly what you mean, but it sounds like you were trying to format your external SD card from inside your nook? If you write the CWM bootable image to your external SD using Win32Diskmanager you don't need to format it. Writing the image will erase everything already on the external sdcard. You should be able to boot from it and install the zips. Is your problem that you can't boot from the external SD, or that you erased the zips from your internal sdcard?
Go back and read over verygreen's thread referenced in step 4-- I think he may have posted an updated version of CWM that can read the external sd card. Otherwise:
Did you make a backup of your carbon rom install? If so, you could write a bootable (earlier) version of cwm to the external sdcard, copy your backup to the sdcard and restore it, and then start over. (or not, as some people seem to think Carbon rom is just as good-- I never tried it) The thread in step 9 has great instructions that might help with that.
This thread (http://forum.xda-developers.com/showthread.php?t=2579945 ) is about installing a different version of cm11, and it's in a non-developer forum, where we can post. You might find answers there.
se1961 said:
Not sure what you exactly what you mean, but it sounds like you were trying to format your external SD card from inside your nook? If you write the CWM bootable image to your external SD using Win32Diskmanager you don't need to format it. Writing the image will erase everything already on the external sdcard. You should be able to boot from it and install the zips. Is your problem that you can't boot from the external SD, or that you erased the zips from your internal sdcard?
Go back and read over verygreen's thread referenced in step 4-- I think he may have posted an updated version of CWM that can read the external sd card. Otherwise:
Did you make a backup of your carbon rom install? If so, you could write a bootable (earlier) version of cwm to the external sdcard, copy your backup to the sdcard and restore it, and then start over. (or not, as some people seem to think Carbon rom is just as good-- I never tried it) The thread in step 9 has great instructions that might help with that.
This thread (http://forum.xda-developers.com/showthread.php?t=2579945 ) is about installing a different version of cm11, and it's in a non-developer forum, where we can post. You might find answers there.
Click to expand...
Click to collapse
Sorry I didn't explain very well, I installed verygreens KK rom succesfully and wanted to do a backup of it. I put in a SD card and thought I would format it as it had some old junk on there. When I tried to format through the settings section the tablet would just reboot. So I booted into evergreens CWM recovery and tried through there, it formatted something but my external card cannot be read. And some of my settings have been lost, some time ago I used 4. Swapping "sdcard" and "ext_sdcard" from this post http://forum.xda-developers.com/showthread.php?t=2062613. So I think that may be my problem. I have back ups so no problem.
mikemelbrooks said:
some time ago I used 4. Swapping "sdcard" and "ext_sdcard" from this post http://forum.xda-developers.com/showthread.php?t=2062613. So I think that may be my problem.
Click to expand...
Click to collapse
Ah! I thought from your first post that you were quite new to this process, but clearly you are ahead of me on this one. Good luck.
Update: installed the latest build which has the touch screen patch. It's PHENOMENAL. Truthfully, the only thing I need this tablet for is using a website that involves a lot of dragging and dropping. I had to train myself not to accidentally zoom and/or copy. No more! I haven't even enabled ART this time because it's working so well. I would have posted on Verygreen's thread to thank but don't have enough posts.
Sent from my BN NookHD+ using xda app-developers app
Back to stock
Great post i want to try this but am wondering is it possible to go back to stock after doing this, i installed clockworkmod before so i have a backup of my original nook before i installed anything.
RADZ1973 said:
Great post i want to try this but am wondering is it possible to go back to stock after doing this, i installed clockworkmod before so i have a backup of my original nook before i installed anything.
Click to expand...
Click to collapse
Yes, just restore your backup.
And BTW, never fully quote a long opening post like that. It just wastes bandwidth and we have to scroll through all that to see your comment or question.
Sent from my SCH-i705 using XDA Premium 4 mobile app
Respond
Sorry about the quote , thank for the info though cos i wasnt sure i could go back to stock. I have just followed this tutorial and all is well, this is good because my Moto g just got this update so im in sync .
RADZ1973 said:
Sorry about the quote
Click to expand...
Click to collapse
You can actually go back and edit out that quote.
Sent from my SCH-i705 using XDA Premium 4 mobile app
kokercey said:
Thanks for the excellent post. :good:
Click to expand...
Click to collapse
Next time, no need to quote the full post.
Nook for Android?
This works very nicely. But Nook for Android won't install. Are there properties I can change to allow Nook for Android to install on this 'new' Nook device?
rogerlig
Great tutorial.
I would suggest around your step 9, after you have made a backup with CWM, before you wipe data/factory reset:
Remove microSD. Reboot into stock Nook and connect to computer. Copy off the backup from clockworkmod folder to your computer. Then boot again with the microSD, and proceed to wipe and flash.
Otherwise, the backup may get wiped.
rogerlig said:
This works very nicely. But Nook for Android won't install. Are there properties I can change to allow Nook for Android to install on this 'new' Nook device?
rogerlig
Click to expand...
Click to collapse
You must get the nook for android app from someplace other than Play Store, like 1mobile.com.
Sent from my BN NookHD+ using XDA Premium HD app
I got everything running, but my HD+ is running extremely laggy. I did a full wipe, but my internal SD card is still a little over 7 gigs full. Is there something else I missed? The Nook reader is particularly slow.
liukuei said:
I got everything running, but my HD+ is running extremely laggy. I did a full wipe, but my internal SD card is still a little over 7 gigs full. Is there something else I missed? The Nook reader is particularly slow.
Click to expand...
Click to collapse
Yes, a full wipe (factory reset) did not remove your previous media files. To do so you need to boot to CWM and go to mounts and storage and format 'data and datamedia'. That clears out previous files and should improve performance.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Yes, a full wipe (factory reset) did not remove your previous media files. To do so you need to boot to CWM and go to mounts and storage and format 'data and datamedia'. That clears out previous files and should improve performance.
Thanks. Will I need to reflash CM 11 after?
Click to expand...
Click to collapse
liukuei said:
leapinlar said:
Yes, a full wipe (factory reset) did not remove your previous media files. To do so you need to boot to CWM and go to mounts and storage and format 'data and datamedia'. That clears out previous files and should improve performance.
Thanks. Will I need to reflash CM 11 after?
Click to expand...
Click to collapse
no if it successfully flashed last time, you just need to reset-up your accounts and install apps again.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
[Caveat emptor: adopt/follow this guide at your own risk].
FWIW, here the process I used to install CM11 internally (on emmc*) on my HD+:
Using a disk partition tool (such as MiniTool Partition Wizard Home Edition) create on SD card a Primary FAT32 partition, and set the partition ID type for the partition to 0x0C FAT32 LBA and set its Active flag. Once this is done, the partition should appear as a (read/write accessible) drive under Windows.
Use an archive file manager such as 7-zip and extract the .img file from verygreen’s emmc-cwm-early3.1.img.gz (http://forum.xda-developers.com/showpost.php?p=49192422&postcount=1)
Use the archive file manager to extract the files from the .img file and copy them to the SD card: first MLO, then next u-boot.bin, uImage, kernel, ramdisk.cwm.
Copy to the SD card:
verygreen’s flashable CWM recovery zip file cwm-recovery-ovation-6.zip (http://forum.xda-developers.com/showpost.php?p=49192422&postcount=1)
the zip file of CM11 ROM build of your choice – e.g., from http://download.cyanogenmod.org/?device=ovation (see http://www.cyanogenmod.org/blog/cm-11-m4-post-release-items for considerations in choosing nightlies vs. snapshot/stable builds)
the zip file of the Gapps package corresponding to CM11 – e.g., http://opengapps.org/?api=4.4&variant=nano
Put the SD card into the HD+, and boot from its power-off state.
[Optional step but highly recommended] Select Backup to backup your HD+ current ROM config (/boot, /recovery, /system, and /data).
Select Wipe data & factory reset.
Select install zip from SD card and install flashable CWM recovery zip file.
Select install zip from SD card and install CM11 zip file.
Select install zip from SD card and install Gapps zip file.
Remove SD card and select reboot.
Once the HD+ boots up, set up the wifi connectivity and your google account info.
If the Nook fails to boot off SD -- the two most common symptoms of failed SD boot and their likely causes are:
The HD+ boots straight to stock -- most likely the boot partition's type and/or flag are not correctly set, or the HD+ cannot find the MLO in the boot partition (make sure that MLO is the very first file to be copied to the freshly made /boot partition).
If the HD+ consistently boots straight to stock in spite of a valid /boot partition and boot files, it's possible that the tablet is one of those HD+ units that have difficulty booting of SD cards, see http://forum.xda-developers.com/showthread.php?t=2288688 for more info and potential remedies.
The HD+ screen stays dark for seemingly a long time then eventually boots to stock -- most likely the MLO or u-boot.bin are corrupted. When in doubt, compare the size of the two copies of the files in bytes.
HOW-TO Guides for Installing CyanogenMod on Nook HD+
Installing CM11 Internally on Nook HD+ (this guide)
Building a CM11 SD card with Customized Partition Sizing for HD+
Updating HD+ Internal EMMC to CM11 from CM10.x
What to download?
Hey Guys,
First off I really appreciate the time you take to answer my questions.
I still need some guidance however.
Again I have "Android 2.2" The last stock upgrade they updated.
So with that being said. What files should I download, and what order.
Everyone is giving me different links and i am not sure what to do.
This is my first time every doing something like this on a nook or tablet.
So please be patient with me. I would greatly appreciate it.
Should I download the cyanogenmod software first to my nook folder on my computer desktop, and then what other files do I need?
Once I download them I plan to transfer them over to a card for my usb slot that is on the bottom of my nook I am assuming, correct?
Once I have the software I need, Then I need to know what order should I install what first.
When I am doing this software installs. Do I need to worry about what is on there now.
This is nothing I need to save so I am not afraid of loosing what ever is on the nook at the moment.
All of this stuff can be let go or deleted or refresh install. Don't care.
I just want to get my table to work like a computer basically. So, I can watch the videos that i want to watch on my tablet, and still
be able to surf the net and read internet websites, you tube .com and other websites I like of course.
By doing this process this will still allow me to do this I am assuming. Again, I have never mode so I am not sure what this
cyanogenmod is or what it can do to help. I am game for trying to do it if it gets me what I want it to do.
I did see the other links posted above. I just diidn't know where to start or what to download first do to the fact I have only 2.2 android software on my nook color hd+
Again, I appreciate the advice peeps!
Please elaborate if you can with what links and what to do. Thanks again. Karl
kjames1973 said:
Hey Guys,
First off I really appreciate the time you take to answer my questions.
I still need some guidance however.
Please elaborate if you can with what links and what to do. Thanks again. Karl
Click to expand...
Click to collapse
First of all, you need to realize that installing any kind of aftermarket ROM on your android device will void your warranty with no manufacturer support.
Second, installing ROMs is inherently risky, since there is always the possibility of bricking your device.
Thirdly, any kind of ROMs that you see in the Android Development section are not completely stable; they are usable but there will be bugs & glitches. So all ROMs come with a caveat: use at your own risk!
That being said, here's how it works:
You will need three files; (a) SD Card Image (b) Recovery Image (c) ROM that you want to install.
For this purpose I am using CM11 as the example, the thread is here.
[1] Every Android device has a manufacturer installed recovery program; to install a custom ROM you need to have a custom recovery. This custom recovery is what allows you to make changes to your Android device.
[2] The Nook HD+ has the advantage of being able to boot from its SD card slot (kinda like a computer booting from a CD/DVD drive).
[3] Download the image files and create a bootable SD card. Copy the Recovery Image and the ROM to this SD card. You will need WinImage to create this card in a Windows computer.
[4] Insert this card into the HD+ and reboot your device. Here's the kicker, the HD+ may not boot from the SD card and may simply go to normal boot. If that happens you will have to keep repeating it. Check older threads about this issue.
[5] Once it boots from the SD Card, follow the instructions listed in the first post of that thread.
Brief summary (this is true for most devices): Create a bootable SD card, use this card to boot the device, install Custom recovery into the device, then install the ROM. Once you have a custom recovery installed, you won't ever have to use the bootable card again unless you run into some issues.
Good Luck!
For Hirent.
Hirent,
First off, I want to say thank you so much for the very detailed reply you sent my way.
I will use this with digression of course. I am aware of the warranty issues that it will cause.
The one major question I have before I dive into this project.
I am aware of the possible bugs and how it is not perfected.
Will this enable me to download and install flash player on a updated android that was suggested in this article you posted?
Or will it just work automatically after I do the project of these software installs. Another words I will be able to open chrome or factory
browser and go to NHL.com, MLB.com, NBA.com and other s and play the videos on the Nook HD+ Color after installs or no?
Thanks for the advice, help, and replies.
Karl
kjames1973 said:
...
The one major question I have before I dive into this project.
I am aware of the possible bugs and how it is not perfected.
Will this enable me to download and install flash player on a updated android that was suggested in this article you posted?
Or will it just work automatically after I do the project of these software installs. Another words I will be able to open chrome or factory
browser and go to NHL.com, MLB.com, NBA.com and other s and play the videos on the Nook HD+ Color after installs or no?
...
Click to expand...
Click to collapse
FWIW, I am running CM11 (M11 snapshot build: http://download.cyanogenmod.org/?device=ovation&type=snapshot) on my HD+, and Flash works reasonably well on the Chrome browser.
New Issue with SD Card 8gb, Centon
Hello,
I tried to follow the instructions on deleting partition on SD card. I also did get it wipe. But, the new issue is I am not able to go any further in the process.
I tried to read the card in my computer and now the card is not being recognized by windows on "my computer" It is H Drive.
IT was now its not. I deleted partition then was going to try to create the new partition. That was not highlighted on the partition magic software.
The article I was following was this.
https://www.youtube.com/watch?v=fLbr1Uyr0sk
Now my SD card is not being recognize by windows 7 ultimate.
I also tried to do the right click trick on my computer then computer management. Then did click storage and then drive then so on.
However when I did that, only that screen recognizes my sd card before and after. But no other screens like my computer screen.
What do I do next with this card to continue. I was trying to follow that tutorial above then go to the windows disc 32 part.
Then drag the software over to start installing it on my nook. But, obviously I never got that far. Can you help me get the SD card to work again and tell me what I did wrong and what to do next so I can move forward to add CW & whatever android software will work well with flash. So I can use the other sites I mentioned in my other post.
If anyone can help I would appreciate it. I am stuck and not sure what to do next.
---------- Post added at 05:41 AM ---------- Previous post was at 05:33 AM ----------
Weird.
I just put the sd card in a usb card dongle that inserts the sd card into usb thumb drive and all of the sudden I see the drive on this computer now.
What should I do now?
Do I still have to go and do the windows disc 32 imager part.
Then drag and drop the software I need and drop in the card to my nook then install.
Or just drag software that I need like CM and Android and move forward with that.
Which should I do first. If it is the later part, which CM and Android should I use for the Nook color HD +?????
Thanks again for help and sorry about that first post, I swear it was it seeing it before. Weird.
Thanks, Karl
Google Play
I've followed all of the instructions and downloaded recovery, CM12 (cm-12.1-20160220-NIGHTLY-m7.zip), and gapps for 6.1. The system boots and I an navigate; however, Google play is not loading, when using the browser the content area becomes untouchable (touch screen in areas of the body of the page doesn't work), and there is not choice to set up a google account.
Any advice would be appreciated!
ummhasan said:
I've followed all of the instructions and downloaded recovery, CM12 (cm-12.1-20160220-NIGHTLY-m7.zip), and gapps for 6.1. The system boots and I an navigate; however, Google play is not loading, when using the browser the content area becomes untouchable (touch screen in areas of the body of the page doesn't work), and there is not choice to set up a google account.
Any advice would be appreciated!
Click to expand...
Click to collapse
What tablet are you having this issue with?
AFAIK currently there is no CM12 nightly build yet for the Nook HD+ ("ovation") or HD ("hummingbird"). Make sure you pick the CM build specific for your device (e.g., cm-11-20160208-NIGHTLY-ovation.zip for the Nook HD+); using a ROM build for a different device can brick your tablet.
Sent from my BN NookHD+ using XDA Premium HD app
Nook HD+ and Google Play
Thanks for your quick reply. This must be the problem. I originally installed the CM11 and Google Play did not work so I went out and found another 'walk through' via the link given to me last time and thought CM12 was the right choice.
I'll go back and reformat after getting the right gapps for CM11.
digixmax said:
What tablet are you having this issue with?
AFAIK currently there is no CM12 nightly build yet for the Nook HD+ ("ovation") or HD ("hummingbird"). Make sure you pick the CM build specific for your device (e.g., cm-11-20160208-NIGHTLY-ovation.zip for the Nook HD+); using a ROM build for a different device can brick your tablet.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
ummhasan said:
Thanks for your quick reply. This must be the problem. I originally installed the CM11 and Google Play did not work so I went out and found another 'walk through' via the link given to me last time and thought CM12 was the right choice.
I'll go back and reformat after getting the right gapps for CM11.
Click to expand...
Click to collapse
For CM11 I'd suggest you use the GApps package http://opengapps.org/?api=4.4&variant=nano.
digixmax said:
For CM11 I'd suggest you use the GApps package http://opengapps.org/?api=4.4&variant=nano.
Click to expand...
Click to collapse
Thanks, so what I did go back and reformat the sd card and start over with the early, cm recovery ovation, cm11, gapps 4.4; however, apparently I didn't unzip and copy the early correctly because after I rebooted the hd+ after going through the wipe/install process, I got an error that the setup wizard could not start. I powered off, wiped the sd card and began again following directions very carefully making sure the MLO was copied first.
Now, it seems I have somehow bricked the device because it will not power on and has only a green light when plugged in, instead of the normal amber. Any ideas of how to get it to turn on and boot to the SD again?
EDIT:
Okay, as I stated in my edit, I got it to boot, but I'm still getting the popup "Unfortunately, Setup Wizard has sopped. Any ideas?
Thanks for your time!!!
ummhasan said:
...
EDIT:
Okay, as I stated in my edit, I got it to boot, but I'm still getting the popup "Unfortunately, Setup Wizard has sopped. Any ideas?
...
Click to expand...
Click to collapse
Did you do a "wipe /data & factory reset" before you flash/install the zip files of CM11 ROM and GApps?
Did the installation of the 2 zip files succeed without error messages?
I got it working after I got it to bypass the error by dragging down the menu and connecting to wifi. Once I did that I was able to set up the Google account and everything was fine thereafter. There is a bit of flickering now and then, but everything seems to be working fine now. Thanks so much for your time and help!!!
Recover Data?
Hi,
I've jut reinstalled cm11 onto my nook HD+ & realise I failed to copy a text file over before I formatted the HDD. Is it possible to recover a deleted file off the nook HDD via a PC? I've tried changing the developer option settings - Android debugging on, ADB Over Network on & connecting via USB both MTP & UMS (I think that's what they were) but when I run any of my Data Recovery programs in win7, the drive isn't recognised as an option to recover from.
Any help would be appreciated,
Thanks