I restored my nexus 4 to complete stock, then unlocked, installed CWM, and flashed CM.
Now my LTE won't work anymore. When I go to change to LTE preferred it always goes right back to WDCMA preferred.
I'm assuming the radio I have is wrong or something?
That and APN settings. Make sure you're on .33 or below for radios.
Sent from my Nexus 4 using xda app-developers app
My current baseband ends in. 48
What baseband should I use? Where would I get it?
nmunro said:
My current baseband ends in. 48
What baseband should I use? Where would I get it?
Click to expand...
Click to collapse
it is a 48 !!! BaseBand. that is not good for LTE . as othrers says, you have to be on 33 or below
cheers
Is there a best radio for LTE and Nexus 4? Can someone link me to a good radio for LTE? Preferably one where I don't have to re-do the LTE thing everytime I boot the phone.
nmunro said:
Is there a best radio for LTE and Nexus 4? Can someone link me to a good radio for LTE? Preferably one where I don't have to re-do the LTE thing everytime I boot the phone.
Click to expand...
Click to collapse
There are two radios. Yours and the .33 that works with LTE.
There is no radio where you don't have to redo LTE every boot.
Sent from my Nexus 4 using Tapatalk 2
I found radios here.
Can I flash this radio with the latest version of CM 10.1 with no problems?
How would I go about flashing the radio? I'm assuming using fastboot? Something like fastboot flash radio filename.img?
Edit:
So it actually was fastboot flash radio filename.zip
I flashed the radio and got no network connectivity at all. Tried to add Bell LTE APN, but when I clicked save, it still listed no APN's. Flashed back to the .48 radio and it works.
Any help?
Related
Hello there, so heres the story.
My mate got Atrix 4g and apparently he was playing in the settings mode and _accidentaly_ locked the phone to USA band only. Needless to say his phone no longer is able to make calls or use any other of the network modes now.
My question is how can I update the radio so phone works with other modes again ? I googled and tried master reset and factory reset with no luck.
Then I found this Hope this is right for Atrix 4g ? and will that image if I flash it over current one will update/over write the current RADIO and hopefuly make phone usable again? Should i flash this “1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf.gz” over current firmware?
Or is there a way to just flash new RADIO to phone and be over with it ?
Or do I need to root / unlock bootloader on current phone settings then push CWM and use that to flash radios? And if so where do I get said radios?
Or can i just use RDS Lite 5.6 and find some RADIOS and flash them from there?
Phone info
android version : 2.3.6
System version 4.5.141.MB860.ATT.en.US
Baseband
N_01.77.37P
Kernel version 2.6.32.9 [email protected] #2
Build number 4.5.141
Any info on this will be appreciated
thank you.
Just reflash the radio using fastboot. No need to flash a full sbf.
Hey. Not trying to Jack ur thread but i have a quick question that i didnt want to start a new thread for:
Can i install an interational radio firmware on my att atrix? I ask bc i took my atrix overseas and i cannot recieve 3g bc i think att cripples this frequency (900 i think).
Any help is appreciated
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Yes you can, I flashed my AT&T model with UK radio
And does this uncripple the frequencies that att crippled? ?
Sent from my MB860 using xda premium
quetzalcoatl2435 said:
Just reflash the radio using fastboot. No need to flash a full sbf.
Click to expand...
Click to collapse
anaschillin said:
Yes you can, I flashed my AT&T model with UK radio
Click to expand...
Click to collapse
Can you guys tell me how to flash RADIO with fast boot ? Im not very savvy with whole motola stuff. So any pointers or how-tos or quick steps here will be very helpful.
And can I try with this radio ? http://forum.xda-developers.com/showpost.php?p=34350668&postcount=3
I'm having problems flashing roms to my device,
My baseband version is I337MVLUAMDJ
I'm seeing MDC, and MDL, but nothing on MDJ.
is this a rare type of baseband?
when i flash any rom, i get the reboot cycle.
i've cleared cache/wiped data etc.
mlkemac said:
I'm having problems flashing roms to my device,
My baseband version is I337MVLUAMDJ
I'm seeing MDC, and MDL, but nothing on MDJ.
is this a rare type of baseband?
when i flash any rom, i get the reboot cycle.
i've cleared cache/wiped data etc.
Click to expand...
Click to collapse
its not a rare baseband, its just the last OTA rogers released soon after launch, i have it since day 1
I have the same band on my Fido S4, too.
mlkemac said:
I'm having problems flashing roms to my device,
My baseband version is I337MVLUAMDJ
I'm seeing MDC, and MDL, but nothing on MDJ.
is this a rare type of baseband?
when i flash any rom, i get the reboot cycle.
i've cleared cache/wiped data etc.
Click to expand...
Click to collapse
Fido = Rogers
Sent from my SGH-I337M using Tapatalk 2
mlkemac said:
I'm having problems flashing roms to my device,
My baseband version is I337MVLUAMDJ
I'm seeing MDC, and MDL, but nothing on MDJ.
is this a rare type of baseband?
when i flash any rom, i get the reboot cycle.
i've cleared cache/wiped data etc.
Click to expand...
Click to collapse
I have the same baseband and I was able to flash cm10.1 just fine using twrp
Sent from my SGH-I337M using xda premium
Has anybody above unlocked your s4?
Thanks.
Sent from my Nexus 4 using Tapatalk 2
ma678 said:
Has anybody above unlocked your s4?
Thanks.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Yup im rooted and on a different from. I used the tool from here: http://forum.xda-developers.com/showthread.php?t=2298299 worked great.
cantwin said:
Yup im rooted and on a different from. I used the tool from here: http://forum.xda-developers.com/showthread.php?t=2298299 worked great.
Click to expand...
Click to collapse
Rooting and unlocking are two different things.
Rooting = full access to the android system.
Unlocking = network unlocking, so you can use the Robbers S4 on AT&T or another network.
ma678 said:
Has anybody above unlocked your s4?
Thanks.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
i unlocked mine with THIS guide. confirmed working, my buddy's Telus usim works in my Rogers handset.
It didn't work on my Fido S4.
xtechx said:
i unlocked mine with THIS guide. confirmed working, my buddy's Telus usim works in my Rogers handset.
Click to expand...
Click to collapse
Hey guys,
I used the above guys and managed to install CM 10.2 and it works.. okay.. I have to admit that I want to go back and try a debloated TW Rom again so that I can use the multiwindow, roaming and camera support that comes with the phone.
The biggest issue I have noticed that a number of ROMS do NOT show up in my Goo-Manager. I am guessing it is because of my MDJ Base-band. I have done some searching but cannot find any note of changing from MDJ - to MDL and therefore opening up some ROMS like CleanROM.
Please let me know if you have done anything like this before.
Cheers
Travis
I flashed Foxhound 2.0
No 4G/LTE option available anymore
APN is as before and correct
How do I get it back ?
friis99 said:
I flashed Foxhound 2.0
No 4G/LTE option available anymore
APN is as before and correct
How do I get it back ?
Click to expand...
Click to collapse
Try another modem
Or look if your settings support LTE it might be set to wcdma
Sent from my SK17i using Tapatalk 4
Try *#*#4636#*#* check under phone information preferred network. See igf you can set to 4g
Sent from my GT-I9505G using xda app-developers app
In Foxhound OTA settings, there's a LTE Fix, download it and reboot to recovery and flash it
Crauze said:
In Foxhound OTA settings, there's a LTE Fix, download it and reboot to recovery and flash it
Click to expand...
Click to collapse
Thanks! I got LTE
Did the LTE fix cause a new radio modem to be flashed? Could there be sensitivity degradations as a result?
Would this only affect LTE mode ?
I get (indoor) -85 to -95 dBm on UMTS /HSAP depending on position - in LTE mode I get -92 to -109 dBm in the same positions
Appreciate the help
Hey guys having a bit of problems. I tried the LTE enabler since we have it where I live now. I got the zip from a popular thread in the general section, I asked in there but figured this warranted it's own thread. I had no bars, so I switched back to the latest radio and now I'm permanently stuck with zero cell reception of any kind. I've tried everything I can think of to fix it, I flashed a new ROM, restored a backup, I even flashed the stock image from Google, and did each piece individually in a terminal, so I know I flashed the radio and I'm STILL not getting any service.
Today, I went into Telus to get a new sim card because I thought that was the problem, but that didn't help at all.
Please don't tell me I'm screwed. And yes I did try the disable zip multiple times.
I've attached screenshots of my APN and mobile network settings. Trying to join the network results in an error message.
Anyone? Would greatly appreciate some help as I'm stumped and this is my only phone.
Restore the Nandroid you made before starting the process.
Uh huh.
Sent from my Nexus 4 using xda app-developers app
chrisrozon said:
Restore the Nandroid you made before starting the process.
Uh huh.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
My apologies if I was unclear in my original post, I've tried that. Multiple times.
i followed this thread, and LTE worked like a champ. Though i did not stay on a stock ROM, u personally used DirtyUnicorn rom, but still followed steps to edit the build.prop manuall, and flashed the radio .33. You must use the correct apn's. For US T-Mobile, there is a old epc.tmobile.com apn that does not get LTE reception even if you have a lte equipped device, i had to use the fast.t-mobile.com apn, im sure Telus has an updated apn as well.
http://hippowise.com/how-to-permanently-enable-lte-on-android-4-2-2-nexus-4/
BTW, i dont think it matter what android version your in, cause when i did this, i was on a stock 4.2.2 and it worked, and then i flashed over to the DU ROM, and made the same edits since i used a new rom, and it worked perfectly again. Make sure to press *#*#4636#*#* once all is set said and done and put the netowrk setting to LTE/GSM auto-prl. Not sure why the option for LTE/WCDMA/GSM is not available, maybe someone could help with that one???????
One thing most people forget is that your provider plays a big part in your LTE service. If your sim/account is not provisioned for LTE you will never get it.... period. IN my case I came from an android phone that had no LTE support so it was never provisioned on my account(att). And since the nexus wasent shipped with LTE support or part of att' s LTE phone lineup...they refuse to add LTE support for my nexus. The only way for me to get LTE provisioned on my sim is for me to buy an att LTE compatable phone....then I could just use the sim in my nexus. Try flashing a stock Google image, see if it helps.
Sent from my Nexus 4 using XDA Premium 4 mobile app
I have rooted/TWRP'd my Nexus 6P and wanted to flash the latest Radio radio-angler-angler-01.29.img
Can I just use fastboot with "fastboot flash radio radio-angler-angler-01.29.img"
I already have latest vendor image. Is it OK to only flash the radio if everything else is working and up to date?
Thanks
Yes, you can fastboot flash the Radio...pretty much anytime.
Yes you can. The latest bootloader is version 3.51 and the radio is 3.61. They both can be found here.
And remember to reboot the bootloader after flashing the bootloader and the radio like this sequence.
Code:
fastboot flash bootloader bootloader-angler-angler-xx.xxx.img
fastboot reboot-bootloader
fastboot flash radio radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
If you are on T-Mobile don't flash the newest radio.
sapphirecoupe said:
If you are on T-Mobile don't flash the newest radio.
Click to expand...
Click to collapse
Newest radio working great for me here in PA.. Using metropcs which operates on T-Mobile towers
swapavi said:
Newest radio working great for me here in PA.. Using metropcs which operates on T-Mobile towers
Click to expand...
Click to collapse
Same here. Does voice over WiFi or voice over LTE work for you? It worked on my Nexus 6 but it doesn't on my 6p running on Metropcs.
Sent from my Nexus 6P using Tapatalk
mexiking713 said:
Same here. Does voice over WiFi or voice over LTE work for you? It worked on my Nexus 6 but it doesn't on my 6p running on Metropcs.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Yep, but you'll need to add the metropcs ims APN
swapavi said:
Yep, but you'll need to add the metropcs ims APN
Click to expand...
Click to collapse
Thanks for the info. Do you choose the ims APN or does it only need to be added? What does your MetroPCS 260 look like? I have 2 with the same name. I wanna know which one to delete.
Sent from my Nexus 6P using Tapatalk