Hello all
I'm a noob here and have recently flashed my GT5360 to Hyperion 8 GM edition
I was running the latest firmware i.e. DDMD1
The procedure given was followed to the letter leaving me with a successful flash but no IMEI
I flashed the RIL fix again but still no change
Finally I repeated the entire process from scratch but SKIPPED the RIL fix..Voila..the IMEI was back
So my simple conclusion is this..if you are going to use the stock kernel then skip the RIL fix
I have tested this for DDMD1, don't know if it works for other basebands
The ROM is superb and stable
Many thanks to CarlDeanCatabay and Aniket.Lamba :angel:
ddmd1 has a different stock ram disk to other stock kernel basebands which is why its not really recommended from me
if you are using the stock kernel then fine but if you try using a custom kernel you will loose imei due to different ram disk
Dear All,
My Device Currently running on
Android 4.4.4 Custom ROM CM11 snapshop M8.
I've tried to flash the kernel to lean kernel.
http://forum.xda-developers.com/showthread.php?t=2488082
However, after i flash the kernel the screen went black after Samsung logo screen.
Is there any thing i miss out doing?
I wipe cache and dalqiv cache before I flash the kernel.
Any enlighten would be great. Sorry to post here as I couldnt google any relevant information to aid me.
Thanks in advance
lightman66 said:
Dear All,
My Device Currently running on
Android 4.4.4 Custom ROM CM11 snapshop M8.
I've tried to flash the kernel to lean kernel.
http://forum.xda-developers.com/showthread.php?t=2488082
However, after i flash the kernel the screen went black after Samsung logo screen.
Is there any thing i miss out doing?
I wipe cache and dalqiv cache before I flash the kernel.
Any enlighten would be great. Sorry to post here as I couldnt google any relevant information to aid me.
Thanks in advance
Click to expand...
Click to collapse
Try downloading leanKernel 3.1 AOSP version.
Usually because lean and temasek updates very often due to commit changes, their newer kernels usually break older versions of CM by showing a black screen after you see SAMSUNG GALAXY NOTE 3.
The old(er) kernels will work for sure, don't use the latest update. If a previous update doesn't work, move back a step.
Hello
I installed Cyanogenmod 11 on my Galaxy Note 3 few months ago, and I am fairly displeased with the stability...
I use the snapshot version M8, clear the Davnik cache, clear/wipe cache partition...
However, the device is still very unreliable, and is rebooting unexpectedly far too often...
The customs roms which are announced as very stable are the ones based on Samsung TouchWiz firmware...
Therefore, I am now giving a try to the one called " X-note "...
I use the clockworkmod recovery version 6.0.5, and the " X-note " zip rom file from there...
However, when I try to install the rom, the following message appears... :
" Starting aroma installer version 2.70RC2
2013 by amarullz xda developpers "
Nothing else happen afterwards...
Would someone be able to help me with this issue... ?
I also tried with an other rom called " Bobcat ", and the same message appears...
Thank You for your Help...
Arnaud
Hello do you have the last bootloader?
Those are 4.4.2 based rom. Have your phone upgraded to 4.4.2 bootloader?. Dont confuse with cm11 4.4.2 as it can run on 4.3 bootloader
Thank You for your replies...
By using the following apps, Phone INFO ?Samsung?
It is said that the bootloader version is N9005XXUDMJ7
Otherwise, I would not if it is a 4.4.2 bootloader...
Arnaud
Hi arnaud! You may be interested in Temasek's CyanogenMod build. You can find the thread in the Android Development forum.
Thank You for this interesting recommendation...
Arnaud
I can recommend you Temasek's CyanogenMod build as well. I am using it as daily rom. Give it a try. If you don't like it you can try Crash ROM.
I am now using Temasek's CyanogenMod , and no more crashes are occurring...
Thank You for this recommendation...
Arnaud
Q&A for [KERNEL] [SM-G900F] [CM12/CM11] Boeffla-Kernel 1.0-beta1 (23-03-2015)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] [SM-G900F] [CM12/CM11] Boeffla-Kernel 1.0-beta1 (23-03-2015). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Many thanks to our Lord for his hard work in last weeks.
Now it is a "real" S5 ))
Sound control?
The Boeffla control app v. 2.1.73 only offers volume adjustments in the Boeffla-Sound section. I tried running the Boeffla Sound Control App v. 1.7.1 from the market as well as a presumably modified version I found on XDA, but both force close immediately. Is there a way to take more advantage of the Boeffla-Sound options on this kernel (2.0-beta3-CM 12.1)?
Issue with CPU and GPU frequencies
Hello...
I have a Samsung Galaxy S5 and i have installed CM12 with the latest kernel 1.0 beta3 and i experience freezes and hot reboots...
I have not overclocked anything as you can see from the pictures and i have left all frequency clock settings at default values, but when i go to CPU-Z i see the values of CPU and GPU overclocked...
In the attached images i have the default settings in Boeffla for CPU on 2457MHz and in GPU at 578MHz and in CPU-Z i see that max CPU frequency is 2.84GHz and GPU is 657MHz...
Why is this happening?
Thank you in advance for your help...
AnDrEaS
Issue with CPU and GPU frequencies
It is being answered by Lord Boeffla...
All is normal. Tools like cpu-z and others always display the maximum possible frequency, regardless of what you cap the frequency to.
So, it just shows something not correct.
You can verify that very easily by using tools like CPU Spy etc and you will see, these high frequencies are indeed not used unless you allow it.
The reasons is: These tools always assume, when overclocking frequencies are available, they are used. Which is not the case by default in my kernel.
nameless rom KLTE 4.4.4
does it work on namelessrom nightly with stock kernel?
edit- will overclocking freeze my phone? i tried ktoonsez's kernel and it froze my phone. i had to reflash /system and rom, thankfully i kept all my data.
---------- Post added at 09:10 PM ---------- Previous post was at 08:57 PM ----------
i would like a list of working roms (4.4x) that work on this kernel. ty
Hi! Thanks in advance. Im having problems with the kernel. Im using resurrection rom and this kernel, and Im suffering a battery draining specially when I put the phone off and I go to sleep or something. I can be sleeping for example 6 hours, and later having around 10% battery less. Im using Greenify, Google Services disabled, but somehow I can not have a real deep sleep when Im gone.
Excuse my english. And thanks again.
help me please
Hello and thanks for a great kernel . I have a big problem : the afternoon I tried to convert the partition data and cache to f2fs but i failed . I tried to return to ext4 and seems to have gone quite perfect . Now I can install rom and gapps but not the kernel ( because bootloop ) can you help me ? I'm desperate
p.s: sorry for my bad english
phoenix rom and boeffla 12x
Hi,
coming from phoenix rom. tried lolli stock kernel which wory fine. tried 12x kernel which do fail to boot from the very beginning. any idea why?
stefan
Flashed the latest beta kernel, reboots after booting and doesn't stop.
Thanks for your work...
Hello Boeffla,
i use your kernels since S3 and i was so happy when i read, that you also support the S5....
I'm very happy with the kernel and i never had problems with the kernel at all (using smoove, interacitve, conservative)!
I really appreciate when you further support the S5 development!
regards Oliver
it wiil work on 5.1 android blisspop v3.5?
Suhaimi.adi9 said:
it wiil work on 5.1 android blisspop v3.5?
Click to expand...
Click to collapse
I tried this kernel (2.1-beta8) on BlissPop v3.6 (BlissPop-v3.6-klte-OFFICIAL-20150701-2254), but some features didn't work (ex: couldn't use tethering).
IMPORTANT: BlissPop is "customized" rom, so you must read and understand when want to use:
Lord Boeffla said:
*** Note, I only test the kernels against official CM12 and CM11 by CM team, not any "customized" roms. If it does not run for you on other roms, do not expect support by me as this is impossible ***
Click to expand...
Click to collapse
Sm 900m
Kernel working with s5 SM-900m?
I would like to test this kernel with Exodus ROM 5.1.1 (http://forum.xda-developers.com/galaxy-s5/orig-development/rom-team-exodus-klte-t3135876). Is it compatible? If yes, how do I know what version of the kernel to take (CM11, CM12, CM12.1, Stock Lollipop 5.0)?
Thanks.
Problems with bluetooth on g900t
I have a g900t with cyanogenmod 12.1 installed. Whenever I try to pair my sony speakers to my phone the speakers do not work properly. So my question is, can I installed this kernel on my g900t? would this fix the bluetooth problem?
Thanks in advance.
Hi, I am new to this. Just got my S5 today.
The phone still got Android 5.0 with TouchWiz on it (original Samsung firmware) and is not rooted yet. I want to install CM 12.1 later. What kind of kernel do I need now? If I install the kernel via Odin is my phone then rooted and ready to install CM 12.1?
Thanks for any help.
Sebi80 said:
Hi, I am new to this. Just got my S5 today.
The phone still got Android 5.0 with TouchWiz on it (original Samsung firmware) and is not rooted yet. I want to install CM 12.1 later. What kind of kernel do I need now? If I install the kernel via Odin is my phone then rooted and ready to install CM 12.1?
Thanks for any help.
Click to expand...
Click to collapse
You need a tar of a recovery. Twrp..http://forum.xda-developers.com/showthread.php?t=2727406
[RECOVERY][klte] TWRP 2.8.7.0 touch recovery [2015-06-23] or others. But i would spend some time looking up the way to go on help threads.. If you need help finding them shout me....
Dont rush. Take time to read up...
Sent from my klte using Tapatalk
I installed Boeffla Kernel and CM12.1 successfully. All works fine. However, my phone always says that I have no root rights. Boeffla Kernel for sure is installed and is showing up in my settings. What can be wrong?
Sebi80 said:
I installed Boeffla Kernel and CM12.1 successfully. All works fine. However, my phone always says that I have no root rights. Boeffla Kernel for sure is installed and is showing up in my settings. What can be wrong?
Click to expand...
Click to collapse
You have to enable root, or to flash SuperSU (a third party, actually the most popular root solution for Android.).
I would actually like to recommend you the stock CyanogenMod root, but I myself am using SuperSU for a while, and I would have to search how to use the stock CM root with 12.1.
So either install SuperSU app from the play store, and download this zip: download.chainfire.eu/supersu, boot to recovery and flash it, to enable Chainfire's closed source root, or Google 'How to enable root on CyanogenMod 12.1' to find out how to use CyanogenMod's own root solution.
Edit:
So I dont have to type everything (instructions how to enable CyanogenMod's own root implementation, IIRC, and if nothing has changed in the meantime, it is Koush's implementation, which is open source:
http://www.gammerson.com/2015/07/how-to-enable-root-acces-in-cyanogenmod.html?m=1
Sent from my SM-G900F using Tapatalk
hello take a while xda forum and the truth is that it has helped me a lot earlier with S IV and now with the note IV .
I have a problem and that the note 4 are no longer suits me as before, lag, some applications crash ... .
I got installed a custom kernel and custom rom i would like to know if it's possible to go back to official kernel and official rom.
I know how to do to roll back to official rom but with the kernel i search a bit and dind't found the kernel.
I know that 's a tall order but appreciate it if someone could lend a hand and tell me I have to do.
Thanks in advance and follow so that this community helps a lot to people who are not expert in android.
Are you sure that flashing official firmware is the right decision? Loosing root and all the good things that come with it?
Lags and all that sh^@+ happens.. but I'll tell you somenting: it happens even more with official firmwares..
What I suggest you is to flash another custom rom (one of the latest) and see how it goes.
Anyway, answering to your question about the kernel: flashing an official rom you'll flash the official kernel too.
_mone said:
Are you sure that flashing official firmware is the right decision? Loosing root and all the good things that come with it?
Lags and all that sh^@+ happens.. but I'll tell you somenting: it happens even more with official firmwares..
What I suggest you is to flash another custom rom (one of the latest) and see how it goes.
Anyway, answering to your question about the kernel: flashing an official rom you'll flash the official kernel too.
Click to expand...
Click to collapse
Ty for the answer i flashed a rom that got in pc a long ago was the 4.4 and upgraded via ota. I know that i lost all i already rooted again but
i'm ****ed now with the SElinux, i can't change it even with the busybox and the prompt, also tried the app of xda the last version and fail also :S
Dunno what to do can u tellme the best rom and kernel at the moment? in the past i tried the n4 ael kernel and the emotion nightly r13.
Only want to change the selinux to permisive and if can to up a little the headphone output vol. :good:
alexplaza1 said:
Ty for the answer i flashed a rom that got in pc a long ago was the 4.4 and upgraded via ota. I know that i lost all i already rooted again but
i'm ****ed now with the SElinux, i can't change it even with the busybox and the prompt, also tried the app of xda the last version and fail also :S
Dunno what to do can u tellme the best rom and kernel at the moment? in the past i tried the n4 ael kernel and the emotion nightly r13.
Only want to change the selinux to permisive and if can to up a little the headphone output vol. :good:
Click to expand...
Click to collapse
Here is The Link of Pure Samsung Base Lollipop For SM-N910F But Remember to Update Bootloader & Modem According To ROM....
Above link Also Have Deodexed Rom(All things are Stock just Deodexed To work with Xposed & Selinux Status)
To Change the Selinux Status Use SELinux Mode Changer...
If you are Changing Selinux Status For Viper4Android Here You go Official ViPER4Android Audio Effects...
If you are on TW than Viper4Android on stock kernel
Regards your Headphone Volume you can Give A try To Poweramp Music Player if you Don't want To go Through all this Stuff...
You Can also try AOSP Roms Like Official Cm12.1 for 910F and 910G Even in Nightlies it's Stable Enough To Perform As Daily Driver (Xposed ,V4Android all will work)...
TechLife said:
Here is The Link of Pure Samsung Base Lollipop For SM-N910F But Remember to Update Bootloader & Modem According To ROM....
Above link Also Have Deodexed Rom(All things are Stock just Deodexed To work with Xposed & Selinux Status)
To Change the Selinux Status Use SELinux Mode Changer...
If you are Changing Selinux Status For Viper4Android Here You go Official ViPER4Android Audio Effects...
If you are on TW than Viper4Android on stock kernel
Regards your Headphone Volume you can Give A try To Poweramp Music Player if you Don't want To go Through all this Stuff...
You Can also try AOSP Roms Like Official Cm12.1 for 910F and 910G Even in Nightlies it's Stable Enough To Perform As Daily Driver (Xposed ,V4Android all will work)...
Click to expand...
Click to collapse
wow many thanks bro, now I'm looking at whether the official 5.0.1 rom + root can change the SELinux to permissive but not really find anything
with Samsung knox if you can not get to do. I went throught the app selinux mode changer that u let me here but nothing happens. :S
I'll apreciate any help to do that
alexplaza1 said:
wow many thanks bro, now I'm looking at whether the official 5.0.1 rom + root can change the SELinux to permissive but not really find anything
with Samsung knox if you can not get to do. I went throught the app selinux mode changer that u let me here but nothing happens. :S
I'll apreciate any help to do that
Click to expand...
Click to collapse
Bro Flash the Deodexed Rom its All Stock Just Some Changes To Support the Stuff That Stock Kernel Not permitted...like Removal of Knox,Init.d Support...etc
Here is Deodexed Lollipop For SM-N910F & Flash this Bootloader & Modem(Please Flash Bootloader & Modem in Odin Accordingly The Rom,like if you Flash BOD2 Rom Choose Appropriate Bootloader or Modem)...
For Selinux Changing You Need Also init.d Support...Here is Init.d Support without need of use Custom Kernel Or This Init.d Enabler (No custom kernel) + Busybox Installer Choose Any one of Them...
I hope It'll solve your issue
TechLife said:
Bro Flash the Deodexed Rom its All Stock Just Some Changes To Support the Stuff That Stock Kernel Not permitted...like Removal of Knox,Init.d Support...etc
Here is Deodexed Lollipop For SM-N910F & Flash this Bootloader & Modem(Please Flash Bootloader & Modem in Odin Accordingly The Rom,like if you Flash BOD2 Rom Choose Appropriate Bootloader or Modem)...
For Selinux Changing You Need Also init.d Support...Here is Init.d Support without need of use Custom Kernel Or This Init.d Enabler (No custom kernel) + Busybox Installer Choose Any one of Them...
I hope It'll solve your issue
Click to expand...
Click to collapse
many thanks bro i flashed a deodexed rom coz i tryed in the past busybox and worked