Hey, this is my first post, but I am having serious issues with my Galaxy Y, whenever I try flash a kernel or rom, upon reboot, I loose my IMEI and cannot make or recieve calls, texts etc, this is all restored using ODIN and going back to stock rom but I would like to know how to solve the problem so I could use a custom rom and kernel.
At moment I have Hyperion installed with savie kernel.
I have searched along the forums, but the only solution I can find is going back to stock rom, surely there is a work around.
Thankyou in advance
EDIT : Whenever I do flash stock rom (S5360_XXKL3_OXXKL1_XXKL3) I have to set my country and provider to get signal, however I can not do this on custom rom
I have flashed Hyperion 9 Rev 3 on DDLK2 firmware with DDLK1 Baseband. The kernel which I'm currently using is Hells Fusion #50. I have restored the data from Rev 1, which I was first using, flashed RIL Fix from Hyperion 8 and odexed it. I have NOT flashed any tweaks/mods etc.
The problem I am facing is that I recieve each message many times (about 6-7 times). I do a lot of texting so it causes a lot of annoyance. I need help because I'm not a dev like you all.
Hope this info is enough for you all to help me. Would be very glad to get help from you all. Thanks.
Q&A for [ROM]SLIMPOP [wiko rainbow][micromax a120 c2c]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM]SLIMPOP [wiko rainbow][micromax a120 c2c]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Link
And where is the link to download ROM?
my phone is not working pls help me
2 days before when i rebooted my phone it showed me as encryption unsuccesful and stucked at boot logo.but i tried to wipe data...bt it showed me error mount/data error...so i tried to flash using sp flash tools....instead of selecting firmware upgrade and tried format and download....format done but on download it showed me error 5069....pls help me..to solve this ASAP...
I repartioned my device does it causes any defects??
i dont know anything where i have to post this....pls help
Issues with GPS
Hello smokerman,
First thank you for this incredible rom, it's very fast and slick !
I have a brand new wiko rainbow and i tried to flash numerous times your rom (slimpop v2) i noticed no issues except with the GPS and location services in general, i activated the GPS + 3G+wifi network positioning, and nothing seems to work i can't get a position, i tried to use numerous gps fix app, and even your own GPS fixer for the wiko rainbow published on your website in april, and still no luck.
I flashed the wiko in stock kitkat 4.4.2, installed TWRP recovery after rooting it, then used the recovery to flash the slimpop v2 zip + the rootfile do the wiping and all the shebang following your instructions to the letter, but everytime (i tried 5 times) the location service just don't work, i tried all the engineering tools available in the dev section of the phone to try and pinpoint the issue but no luck.
Of course i tested if the GPS and location services were working fine with the stock wiko 4.4.2 rom (gps tools, dev tools, waze) it all work fine !
Do you have any ideas what i could have done wrong ? Im open to do some testings, or report any kind of logs you would need to track that issues.
Thanks,
Cya
EDIT1 : strangely enough after a few tests with differents roms, it seems that all the roms i tried that use the WR kernel have issues with the GPS (even with your fix) the ones that doesn't use it have no problems working. I was thinking maybe that brand new rainbow has a different GPS chip ? i got no clues as to why it's not working
I am using MyPhone Rio, and Wiko v13 as base, followed the instructions on flashing, yet stuck on first boot logo after flash. Hmnn, don't know what to do
ktsarlz said:
I am using MyPhone Rio, and Wiko v13 as base, followed the instructions on flashing, yet stuck on first boot logo after flash. Hmnn, don't know what to do
Click to expand...
Click to collapse
I had this problem when i wasn't using the base V13 from scratch (as in reflashed into the phone) then rooted with kingroot then installed the philz recovery that smokerman supplied, then boot in recovery > wipe for installing new rom (it's an option) > then flash the slimpop v2. before doing that i was stuck all the time in bootloop like you. Maybe try this ?
d4rk80z said:
I had this problem when i wasn't using the base V13 from scratch (as in reflashed into the phone) then rooted with kingroot then installed the philz recovery that smokerman supplied, then boot in recovery > wipe for installing new rom (it's an option) > then flash the slimpop v2. before doing that i was stuck all the time in bootloop like you. Maybe try this ?
Click to expand...
Click to collapse
Hmn, before flashing this, I did flash Wiko v13 thru spft, tried wipe to install new rom as I am using Philz, also tried wipe cache dalvik factory reset, same result. I also tried flashing slim v2 as Wiko v10 still stuck on boot logo. I can use 1.1 and 1.2 perfectly before. I am not sure what I am doing wrong
ktsarlz said:
I am using MyPhone Rio, and Wiko v13 as base, followed the instructions on flashing, yet stuck on first boot logo after flash. Hmnn, don't know what to do
Click to expand...
Click to collapse
ktsarlz said:
Hmn, before flashing this, I did flash Wiko v13 thru spft, tried wipe to install new rom as I am using Philz, also tried wipe cache dalvik factory reset, same result. I also tried flashing slim v2 as Wiko v10 still stuck on boot logo. I can use 1.1 and 1.2 perfectly before. I am not sure what I am doing wrong
Click to expand...
Click to collapse
Have you tried for the initial stock flash to use the wiko official tool V13 KK ? maybe there is something wrong going on with your spft, otherwise no clues ^^
I saw that smokerman posted in the original thread that it should be flashed over a V10 stock, and not a V13, sadly he doesn't seems to look at that Q&A thread and i don't have enough post to ask directly in the original thread...
Anyway since we replace everything kernel + rom, what technical reason is there to have a basic V10 instead of anything (like a V13), since we seems to replace everything anyway. Im curious.
EDIT1 : well still no luck starting with a V10 stock rom then flash the slimpop v2 following the procedure, the gps still giving me no fix at all... ah well too bad, it was looking like an incredible rom, i will use the stock until i find something else to use.
Keep up the good work.
Cheers
d4rk80z said:
I saw that smokerman posted in the original thread that it should be flashed over a V10 stock, and not a V13, sadly he doesn't seems to look at that Q&A thread and i don't have enough post to ask directly in the original thread...
Anyway since we replace everything kernel + rom, what technical reason is there to have a basic V10 instead of anything (like a V13), since we seems to replace everything anyway. Im curious.
EDIT1 : well still no luck starting with a V10 stock rom then flash the slimpop v2 following the procedure, the gps still giving me no fix at all... ah well too bad, it was looking like an incredible rom, i will use the stock until i find something else to use.
Keep up the good work.
Cheers
Click to expand...
Click to collapse
For me, with v10 as base still does not boot Haha
Slimpop is based on KitKat, I suppose??
I was in hyperion 9 for last 4 months .3 days ago i flashed merruk kernel on hyperion 9,And my bad luck started.I lost my imei no. (Sim is not detected) ,wifi is broken.i tried ril fix method,but it is not working. i tried so many roms and kernel over merruk kernel but a single one is not booting.my laptop is in servicing centre and they told that it will take almost 2 months.i can not flash stock rom or stock kernel.is there any other way to go back stock rom or stock kernel or custom rom or custom kernel........anything??? Btw nandroid back up of stock rom is not also working on merruk kernel.....what a ****. .....sry...
************************************************************
I am in wrong section.plz dlt this thread
I was in hyperion 9 for last 4 months .3 days ago i flashed merruk kernel on hyperion 9,And my bad luck started.I lost my imei no. (Sim is not detected) ,wifi is broken.i tried ril fix method,but it is not working. i tried so many roms and kernel over merruk kernel but a single one is not booting.my laptop is in servicing centre and they told that it will take almost 2 months.i can not flash stock rom or stock kernel.is there any other way to go back stock rom or stock kernel or custom rom or custom kernel........anything??? Btw nandroid back up of stock rom is not also working on merruk kernel.....what a ****. .....sry...