Can't wipe cache - Help! - Galaxy S 4 Q&A, Help & Troubleshooting

When i go to Recovery Mode and i go to "Wipe Cache" i get "Error" and the device reboot.... It's normal?
Can you test it?

Markz88 said:
When i go to Recovery Mode and i go to "Wipe Cache" i get "Error" and the device reboot.... It's normal?
Can you test it?
Click to expand...
Click to collapse
I am having the same issue, after I did a factory reset. My device will boot into the AT&T setup screen but the settings menu crashes and I cant get out of it.

RandomHandle said:
I am having the same issue, after I did a factory reset. My device will boot into the AT&T setup screen but the settings menu crashes and I cant get out of it.
Click to expand...
Click to collapse
I am having a very similar issue as well. I have the Sprint version - SPH-L720 - and I rooted it using Motochopper. Everything was fine and great and wonderful, but after I downloaded and installed a font installer from the play store, it seems to be softbricked. I can get into Download mode and Recovery mode just fine. I have wiped the phone twice now -- but every time I just try to wipe the cache, it says there is an error and reboots.
I applied the Chainfire Auto-Root too (successfully) and it still stays stuck on the Sprint screen.
I'm guessing I won't be able to fix this issue until the firmware is leaked... but I am crossing my fingers and hoping that someone has a solution sooner.

Since the last update still can't do a wipe cache

Related

Apps self close after update to JH2

I have Bell's Galaxy S only unlocked but no any patch installed on it. I updated to JH2 because I wanted to have the 3 buttons recovery just in case. But after the update some apps opens and close right after. Also gmail downloads emails, but when I try to read it it brings me back to the list of all emails. I did do recovery mode, but no luck. Samsung customer supports sends for repair. I do not want to be for 3 weeks with no phone. Any help will be deeply appreciated.
try clearing the cache
you might have some conflicting settings left from the previous ROM
you can either boot into recovery mode with the 3 buttons combo
or you can download this app http://forum.xda-developers.com/showpost.php?p=8187376&postcount=63
and it will clean it for you
I did try the recovery mode with the 3 buttons menu options but no luck with it. It is the same ofter a recovery. The cacheclener is only for rooted phones, and mine is not rooted. Do you think there is something elese left to explorer?
Thanks
Any help about this priblem?
Sent from my GT-I9000M using XDA App
why not root the phone?
it's safe to root the phone
I rooted the phone and installed cachecleaner from market and ran it. Still the same problem. Even when I try to opne AppBrain it closes right after. Do you have any other suggestions? Thanks a lot.
I tried factory format and reset with this codes *2767*3855# and it is the same.
the next best thing to try is to go into the Recovery Mode, and select the option to Wipe Data
see if it works properly after a flesh start.
Already done.....same problem. I guess I am running out of options. Is there a way to reinstall JH2?

[Q] Verizon Tab won't perform factory reset

I have a Verizon Galaxy Tab SCH-I800 and I woke up today and it was missing some programs that I had installed the night before. Launcher pro keeps crashing so I had to put the Samsung Launcher back on. Now random programs all keep crashing and locking up the device. I performed a factory reset through settings -> privacy -> perform factory reset.
It restarts and goes to the samsung bootloader and I performed wipedata/factory reset.. It says it does it but when it restarts its in the same condition as before.
I've booted directly to the bootloader and tried it too (volume up and power key). I've also tried to wipe cache with no luck..
Any ideas? Can I root it and put a custom rom on it? I saw that there really aren't any roms for the Verizon tabs.. Any reason why?
Thanks for any help..
I just did a restore with all the stock verizon firmware using heimdall and it flashed and everything went through properly..
I booted into recovery and wiped data/cache and restarted...
SAME THING! It will NOT wipe out my existing data.. It restarts with all of my old programs installed and NOTHING will work.. The OS is hosed. How can I wipe this thing back to factory??
kgelso said:
I just did a restore with all the stock verizon firmware using heimdall and it flashed and everything went through properly..
I booted into recovery and wiped data/cache and restarted...
SAME THING! It will NOT wipe out my existing data.. It restarts with all of my old programs installed and NOTHING will work.. The OS is hosed. How can I wipe this thing back to factory??
Click to expand...
Click to collapse
Any luck with this? I'm having the same issue and don't have ODIN setup for it.
Same Issue
Same Issue
I changed my passwords on Facebook, Twitter and Gmail. After about 30 minutes the tablet finally stopped bringing up my information.
Need help!
Same to me...
I've tried to uninstall some apps several time, GTab automatically rebooted and these apps are still there...
Could anyone solve this issue?
Bump...
Bump...
I'm in the same boat..half my apps crash when you try to open them. I've wiped the data partition 3 times, and the cache as well..not avail. Apps are still on the device after a master reset!
scruffy828 said:
Bump...
I'm in the same boat..half my apps crash when you try to open them. I've wiped the data partition 3 times, and the cache as well..not avail. Apps are still on the device after a master reset!
Click to expand...
Click to collapse
I had that problem, and I wound up sending it back to Samsung. It appeared to be a bad part on the board, so they replaced it and it's on its way back now. Not the answer you want, I'm sure, but call it in and get your RMA number.
student.driver said:
I had that problem, and I wound up sending it back to Samsung. It appeared to be a bad part on the board, so they replaced it and it's on its way back now. Not the answer you want, I'm sure, but call it in and get your RMA number.
Click to expand...
Click to collapse
On your new Tab can you perform a hard reset and have it actually work?
my sprint Tab seems to be in the same boat

Transformer TF101 Home and lock not working

Hi,
Hopefully someone has a solution for me.
This morning I switched on my TF101 and when I tried to go home from Gmail the button lit up but did nothing. I was convinced it didn't work. So I treid a few reboots and still nothing. I tried some other launchers and still nothing.
On further inspection I realised that when turning on slide unlock that also didn't work. Changing to pin, pattern or password still shows no unlock.
Are you running stock or a custom ROM?
Are you running stock recovery or a custom one?
I'd try to wipe the cache and dalvik, it fixes lots of weird software issues.
Lethe6 said:
Are you running stock or a custom ROM?
Are you running stock recovery or a custom one?
I'd try to wipe the cache and dalvik, it fixes lots of weird software issues.
Click to expand...
Click to collapse
It's the stock ROM rooted with debugfs.
I know how to wipe the cache but how do I wipe the dalvik. I remember doing it once a couple of years ago on another device but for the life of me now can't remember.
I was going to try clearing the davlik with Terminal Emulator and typed "su" followed by "ls" and all it showed is "recovery". Does this mean it's somehow landed in recovery mode? If so, how do I get out of it?
I managed to clear dalvik through terminal emulator. Optimised apps and rebooted but the problem persists.
Sent from my Transformer TF101 using Tapatalk 2
Reaper1242 said:
It's the stock ROM rooted with debugfs.
I know how to wipe the cache but how do I wipe the dalvik. I remember doing it once a couple of years ago on another device but for the life of me now can't remember.
I was going to try clearing the davlik with Terminal Emulator and typed "su" followed by "ls" and all it showed is "recovery". Does this mean it's somehow landed in recovery mode? If so, how do I get out of it?
Click to expand...
Click to collapse
If you have CWM, go to advanced, wipe Davlik.
frederuco said:
If you have CWM, go to advanced, wipe Davlik.
Click to expand...
Click to collapse
Thanks, now I remember I used CWM.
I thought I'd report back on this in case the information might help someone else down the line.
I tried the cache/davlik clear method and that did nothing for me. I stuck with it for a few days and eventually resorted to button saviour. I also realised that not only was the home button and any lock screen not working, but when using the ASUS quick settings in notifications it didn't show all settings.
This lead me to believe something in the system itself had gotten warped.
Today I did a Titanium backup, factory reset and restored all apps, data and system data. Initially it was fixed but on restart the problem casme back. I knew I'd restored whatever had caused the issue. My next step was to do another factory reset. Since it takes minutes to manually get the system back I only restored apps and data.
This time, after restore the issue was gone. So clearly the issue was in a system setting.
So for anyone else having this issue. Backup with Titanium, factory reset and only restore apps+data.

[Q] "Unfortunately, settings has stopped working" after factory reset

Hello folks,
The SGH-i337 is my first android device and I've had it only for a few days now. I rooted the phone using the "1 click root and debloat" files in the development section of this forum. Everything worked great after that. Today I installed an unofficial apk on my phone but I wasn't comfortable with it at all. So I did a factory reset (are you not supposed to do that?)
After the factory reset, the phone boots up and gives me the usual settings menu. At the end of the settings however, it lags for a few seconds before it says "Unfortunately, settings has stopped working". This brings me back to the "choose a device name" menu in settings. If I fill it out again and go through settings, it crashes again. I can't get into anything else on the phone since it keeps going through the initial setup.
I've tried booting into recovery mode and deleting the cache. I doubt that this clears it since the phone gives me an error and reboots. I tried selecting factory reset through the recovery mode but that also gave me the same issue (said error and rebooted).
After some searching I've found that flashing a stock rom with odin might be the best way to go. Is that correct or is there a better way? On the odin download page, it only lists the 9505 version for Galaxy S4. Could I use that for my SGH-i337?
I think the phone is still rooted because it says Samsung Custom before booting up. Thanks for the help!
Had same exact issue as well.
I booted in to download mode and flashed it with factory rom, then installed CWM.
This is what i used. http://forum.xda-developers.com/showthread.php?t=2297033
KGB7 said:
Had same exact issue as well.
I booted in to download mode and flashed it with factory rom, then installed CWM.
This is what i used. http://forum.xda-developers.com/showthread.php?t=2297033
Click to expand...
Click to collapse
Oh man, you're a life saver. I'm downloading the file and I'll give it a shot. So just to confirm, I put the phone into download mode and run Run_Me.bat and that should fix the issue?
Also for future reference, are you not supposed to do a factory reset after rooting your phone? Thanks!
Fixed it
The issue arose because the settings program was supposed to follow up with at&t locker setup. But since I had deleted the at&t files with the debloat tool, it kept crashing. So the solution was to reset the phone to stock firmware. I used Odin 3.07 to flash the factory ROM onto the phone and now everything is back to normal.
I guess this also answers my previous question, if I'd probably have the same problem again if I do a factory reset.
aleatoric said:
The issue arose because the settings program was supposed to follow up with at&t locker setup. But since I had deleted the at&t files with the debloat tool, it kept crashing. So the solution was to reset the phone to stock firmware. I used Odin 3.07 to flash the factory ROM onto the phone and now everything is back to normal.
I guess this also answers my previous question, if I'd probably have the same problem again if I do a factory reset.
Click to expand...
Click to collapse
Just dont use all in one tool as you did before. Just use the chooper rooting process in the link I provided.
Then manually remove the apps you dont with titanium backup.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

Setup Wizard Loop, blocked my phone!!!

Hello friends, I have a problem with my S5 Verizon, I am currently OK3 deodex and today to turn my home phone in the setup wizard and has been there, nothing happens more, and start in recovery mode and apply wipe data / cache, to factory reset but the system does not pass from there, anyone have any suggestions that might help me.
I share a picture of my problem.
TheMasterMindGT said:
Hello friends, I have a problem with my S5 Verizon, I am currently OK3 deodex and today to turn my home phone in the setup wizard and has been there, nothing happens more, and start in recovery mode and apply wipe data / cache, to factory reset but the system does not pass from there, anyone have any suggestions that might help me.
I share a picture of my problem.
Click to expand...
Click to collapse
Try reflashing the rom
Veid71 said:
Try reflashing the rom
Click to expand...
Click to collapse
You can not because I can not enter Flashfire, I have only access to recovery stock.
TheMasterMindGT said:
You can not because I can not enter Flashfire, I have only access to recovery stock.
Click to expand...
Click to collapse
Use Odin then
I tell them I managed to fix it, send an SMS to my phone which allowed open the application, then select a picture, which allowed him to open a file browser, install FlashFire and ready, reinstall now I installed apps.

Categories

Resources