Related
Is there a circle battery indicator that shows percentage left or just a regular battery that shows percentage left? I want to use it with a sense 2.1 rom. Ive seen some for froyo and am hesitant to use it. Thanks
ya you can fully customize your ROM Online using :- UOT Kitchen
http://circle.glx.nl/
you can read instructions on site how to do it for your ROM.
Greetings,
Also see :
http://forum.xda-developers.com/showthread.php?p=7433227#post7433227
Says its for CronosDroid 2.1.1 but i am on SenseHero 2.1 B5 and it works fine,
Thanks for the replies, however i do not want to reflash a new rom so im probably just going to go with that zip file. So steven, does it only go in 10% increments or any number? And are there absolutely no issues with it? Is it in sync with what setcpu says the battery level is it? Theres a ton of uploaded zip files throughout the thread, which one do you use? Thanks
walkinhotdog said:
Thanks for the replies, however i do not want to reflash a new rom so im probably just going to go with that zip file. So steven, does it only go in 10% increments or any number? And are there absolutely no issues with it? Is it in sync with what setcpu says the battery level is it? Theres a ton of uploaded zip files throughout the thread, which one do you use? Thanks
Click to expand...
Click to collapse
Which Rom are you using? If your phone is rooted, I remember I flashed a circle battery mod once for 2.1 that went up and down in increments of 1% .. this is when I was running Villainrom 12
EDIT: I did some searching for you, for VR 12 I flashed the cd_battery_circle.zip http://forum.xda-developers.com/showpost.php?p=7477040&postcount=51 .. give it a go .. remember Nandroid backup in case you dont like it, or its not compatible ..
Greetings walkinhotdog,
On checking the framework.apk back up i have the images go up 1% at a time,
I have never had a issue with this,
I only have a backup of the framework.apk as my mate and i also make some custom images that were a nightmare to get working.
But with the Circle battery i just flashed the update.zip and it worked grand.
nijnvy & Steven_belfast. Thank you guys so much. Im running Kimera2.1 and flashed the CronosDroid zip file and its looking great so far. Hopefully no conflicts. The Cronos and Villain versions look pretty much the same in the screenshots so i jus randomly picked one to flash. I really appreciate the help
Well the cronosdroid one was stuck at 100% forever, so i flashed the villain one on top of it. works like a charm now
Greetings,
Nice to know its working well for you,
Mite have to reflash mine as now on Sengle 0.7 2.2 with sense,
RusMod 1.19.
Added:
CBW kernel and some build.prop changes.
This is mod for russian users(was so.. unitl now)
Now i wish to give it to you.
About it:
Well, i can copy page from Khal's rom and say - it all there.
If we get something here, that gets to RusMod.
It's fully stock(i hope so, cause we have so many changes... =))
How to install it:
If your rom based on Dexter rom than there is a chance that you will only need
wipe cache and dalvik-cache.
If not - you should wipe all data.
After restoring rom from nandroid apply patch, because russian version of settings.apk and phone.apk have some changes for russian users.
Well, that's all.. i think =)
Credits:
Dexter
xavwanted's
Mioze7Ae
khalpowers
And everyone else who make people happy =)
Links:
RusMod 1.19
RmEnPatch
BTW: i recommend to use software from Go Dev Team like Go Launcher Ex, Go SmS Pro and e.t.c. It really good and opensource =)
Much appreciated... will try out shortly
Btw, is there gingerbread theme for this ROM? If so, where can I get it? Thx
Nope, gingerbread theme not there.
After framework upgrade in RM 1.16 themes are in reworking.
Okay install success... gonna test out for a bit and see how it is. Btw you have lightXt pre-installed over this: https://market.android.com/details?id=com.coreaaosi.afroid&feature=search_result which has more features, better look and a widget... (and doesn't require root)
Also, I switched language to English but there's something in my notification bar as ongoing but I have no idea what it is. That's in russian and it has an American flag next to it in the status bar and clicking on it takes me to some settings that's also Russian... any idea what that is?
syrenz said:
Okay install success... gonna test out for a bit and see how it is. Btw you have lightXt pre-installed over this: https://market.android.com/details?id=com.coreaaosi.afroid&feature=search_result which has more features, better look and a widget... (and doesn't require root)
Click to expand...
Click to collapse
Will see, thanks.
Also, I switched language to English but there's something in my notification bar as ongoing but I have no idea what it is. That's in russian and it has an American flag next to it in the status bar and clicking on it takes me to some settings that's also Russian... any idea what that is?
Click to expand...
Click to collapse
That ruKeyboard.apk, russian keyboard.
Just delete it and install your preffered keyboard.
fjfalcon said:
That ruKeyboard.apk, russian keyboard.
Just delete it and install your preffered keyboard.
Click to expand...
Click to collapse
Yep, that seems to have done it. Thx
Some themes for rusmod:
http://4pda.ru/forum/index.php?showtopic=182489&st=4920#entry7763361
http://4pda.ru/forum/index.php?showtopic=182489&st=2500#entry6954799
But they are for 1.15 version framework.. will wait until theme makers update it +)
Hi I thing this is a great no problems but one poor wifi receiving but everything else is great Russian launge not a problem.give it a try its really sharp.
Sent from my XT720 using XDA Premium App
fjfalcon said:
Some themes for rusmod:
http://4pda.ru/forum/index.php?showtopic=182489&st=4920#entry7763361
http://4pda.ru/forum/index.php?showtopic=182489&st=2500#entry6954799
But they are for 1.15 version framework.. will wait until theme makers update it +)
Click to expand...
Click to collapse
Did anyone make a stock gingerbread one (even if it's not updated yet)? I want to try out that clean gingerbread look...
Anyways, thanks for the ROM, everything looks to be working perfectly right now
syrenz said:
Did anyone make a stock gingerbread one (even if it's not updated yet)?
Click to expand...
Click to collapse
AFAIK no
The gingerbread theme already in the theme section here wouldn't work with this ROM, correct?
Click to expand...
Click to collapse
Well, i'am sorry but i don't like themes... i mean mine phone should be look like stock.. so i never check it. But if it based on metamorth.. why not?
Anyways, thanks for the ROM, everything looks to be working perfectly right now
Click to expand...
Click to collapse
A sing on my ears =)
mchlbenner said:
Hi I thing this is a great no problems but one poor wifi receiving
Click to expand...
Click to collapse
Well, that strange, i have no problems with it at all.. tiwlan m.b.?
Try to use it from Dexter rom... or check Access Point.
fjfalcon said:
Well, i'am sorry but i don't like themes... i mean mine phone should be look like stock.. so i never check it.
Click to expand...
Click to collapse
Yeah, I agree with you for the most part regarding themes, but I consider gingerbread stock actually lol.
But if it based on metamorth.. why not?
Click to expand...
Click to collapse
Yeah... I'll have to figure out how to do metamorph since I've never done that yet. (That's why I edited my post lol)
syrenz said:
Did anyone make a stock gingerbread one (even if it's not updated yet)? I want to try out that clean gingerbread look...
Click to expand...
Click to collapse
fjfalcon said:
Well, i'am sorry but i don't like themes... i mean mine phone should be look like stock.. so i never check it. But if it based on metamorth.. why not?
Click to expand...
Click to collapse
As long as the framework-res folder structure matches Moize7Ae's MM patch it should work. You could also try ZipThemer.
3rdstring said:
As long as the framework-res folder structure matches Moize7Ae's MM patch it should work.
Click to expand...
Click to collapse
RM uses Mioze7Ae's MM patch so it should work =)
Afaik there is some program with name metamorth.. it's changes phone theme...
Metamorph works "live" on the phone & when it themes framework-res it will reboot the phone & with owq's morph I think you have to run through MM a second time to get the white clock color. ZipThemer takes the morph & builds an update.zip (& an undo.zip for when things go wrong). So you create the update.zip (I use HTC Edify Generic update script setting) make sure it is in the openrecovery/updates folder, boot into OC & apply the update.
hows battery on rusmod
I have 48 hours easy.
But me it's me...
As far i can say my battery most living.. don't know why.
Some people say its don't drain power at all... some says that battery goes with 7 hours...
So just try and say =)
screenshots
Hi fjfalcon,
thanks for your work, I wanna give a try to this Rom do you have any screenshot of it? Does it have your swap kernel? ))
And also...what tweaks did you use to improve battery life and performance of your phone? Thanks!
fjfalcon said:
I have 48 hours easy.
But me it's me...
As far i can say my battery most living.. don't know why.
Some people say its don't drain power at all... some says that battery goes with 7 hours...
So just try and say =)
Click to expand...
Click to collapse
Hy fifalcon....
Wanna give a smale Replay to this Rom ....
Man you Rock....thats the best Froyo-Rom i tried on my Phone....and i tried all....
Here are some things....
- It´s a Stock,Clean,Fast,Stabil and MULTI-LANGUAGE Froyo so every Body can give it a try
- For Multi-Lang i Installed Rusmodv1.17+RmEnPatch+Ginger_Original_Glass-signed Keyboard
- I´m using Launcher Pro,Move2SD enabler and thats it.....no Swap....One Partition on SD.....i moved only my Games to SD with nativ app2sd....
- Batterie Live 48h+
- Ram 50MB+
- Internal Storage 170MB....with some Apps and Games 140MB....
Thanks.....
Thanks for good word =)
So here some themes for 1.17:
http://4pda.ru/forum/index.php?showtopic=182489&view=findpost&p=7879598
http://4pda.ru/forum/index.php?showtopic=182489&view=findpost&p=7875990
xt720.ru server have new ip. DNS update will be in 24 hours.
Access by ip
Hello fjfalcon,
Can you please tell us what are the advantages of this rom over stock 2.1 or miui?
Will it increase free RAM, rom space, snappiness ? Any disadvantages over the stock roms? Is the haptic feedback as strong as the original stock rom?
Hi,
Is it possible to customise the navigation bar (get PIE controls, reduce the size) without changing ROM ?
Thanks.
why'd you wanna do that. you would need to take inferior stuff and dork around with hacks and exploits. if you go that route dont pride yourself running stock afterwards, it'll be a patchy mess, far away from a polished experience.
to some extend i can appreciate whats possible with hacks - but i wouldnt be able to cope with the patchyness of it.
but yeah, the pie thing is lmt. and the navbar thing is a mod you find on xda - you get to choose fixed sizes that you can flash. both is stone age compared to what you could do with integrated solutions.
RaphaelH1427 said:
Hi,
Is it possible to customise the navigation bar (get PIE controls, reduce the size) without changing ROM ?
Thanks.
Click to expand...
Click to collapse
I'm on stock rom, but rooted. I use HideBar: https://play.google.com/store/apps/details?id=be.ppareit.hidebar . Works well on the phones with a navigation bar, but was originally written for tablets. The developer has recently received a Nexus 4, so we can expect some love for our phones.
Thanks for your replies, I guess I will have to install PA, I didn't want to install a custom ROM because flashing Gaaos with recovery after each PA update is very anoying (is it the same with CM ?), and also Stock version et the updates first !
How long it takes for PA and CM to add the stock updates to their ROMs please ?
RaphaelH1427 said:
Thanks for your replies, I guess I will have to install PA, I didn't want to install a custom ROM because flashing Gaaos with recovery after each PA update is very anoying (is it the same with CM ?), and also Stock version et the updates first !
How long it takes for PA and CM to add the stock updates to their ROMs please ?
Click to expand...
Click to collapse
The update from 4.2.1 to 4.2.2 was about a days wait at most for PA.
Sent from my Nexus 4
RaphaelH1427 said:
Thanks for your replies, I guess I will have to install PA, I didn't want to install a custom ROM because flashing Gaaos with recovery after each PA update is very anoying (is it the same with CM ?), and also Stock version et the updates first !
How long it takes for PA and CM to add the stock updates to their ROMs please ?
Click to expand...
Click to collapse
Yepp, thats the way it is. Appriciate that you even have the opportunity to flash new roms at all. Nit every phone thats so easy changing rom.
Ok thanks for your replies guys.
jabbeboy said:
Yepp, thats the way it is. Appriciate that you even have the opportunity to flash new roms at all. Nit every phone thats so easy changing rom.
Click to expand...
Click to collapse
It's strange because with my Motorola Defy, when I installed a new update of CM10, I never had to reinstall Gaaps, only the first time...
Reinstalling Gaaps after each updates of PA or CM is only because of the Nexus 4 ?
I think you get something wrong there. "Reinstalling" means literally one more tap in twrp or cwm. You dont have to set them up again, you just do that tap and its done. It has gapp backup, so not even that tap is needed, but not sure if its unlocked already.
molesarecoming said:
I think you get something wrong there. "Reinstalling" means literally one more tap in twrp or cwm. You dont have to set them up again, you just do that tap and its done. It has gapp backup, so not even that tap is needed, but not sure if its unlocked already.
Click to expand...
Click to collapse
**** I don't understand I'm french :/ ... thanks you anyway, I'll keep the stock rom + LMT launcher do get the official android updates first
Hello frnds,
I have my defy + MB526 for more than a year now, n i want to root and than install jelly bean in it.
My system version = 45.0.2310.MB526.Asiaretail.en.03
Baseband EPU93_U_00.60.03
Android Version = 2.3.6
Build Number = 4.5.1-134_DFP-231.
can any one help me with it.
Thank you in advance.
jountha said:
Hello frnds,
I have my defy + MB526 for more than a year now, n i want to root and than install jelly bean in it.
My system version = 45.0.2310.MB526.Asiaretail.en.03
Baseband EPU93_U_00.60.03
Android Version = 2.3.6
Build Number = 4.5.1-134_DFP-231.
can any one help me with it.
Thank you in advance.
Click to expand...
Click to collapse
First thing: You need to root your phone! Follow the instructions in my signature (under 'Rooted' - files found in 'these files')
Once you have successfully rooted your phone, you need to install 2ndInit <link here> (v2.3)
Now you can flash CM10!
i hve rooted.
z3ro-grav1ty said:
First thing: You need to root your phone! Follow the instructions in my signature (under 'Rooted' - files found in 'these files')
Once you have successfully rooted your phone, you need to install 2ndInit <link here> (v2.3)
Now you can flash CM10!
Click to expand...
Click to collapse
I have rooted my phone and i have installed 2ndinit in the phone.
can you guide me what to do next?
Hi,
maybe i can help you.
1.Download here the last quarz rom
http://forum.xda-developers.com/showthread.php?t=1768702
(Its beta! Its mean not perfect, but ran smotth.)
Put this on your sd.
2.Then you download gapps
minimal is enough, because your systemspace is not big.
Here a new link
http://www.uncledan.it/android-files/DefyGapps/Defy-Gapps-CM10.1-20121201-minimal.zip
And dont forget to put it on your sd.
Accu is full?
3.Restart your phone and by the blue led you push down.
4.Go in the custom or stable recovery, not stock.
5.Wipe data/factory reset.Before make a backup, when you want.
6.Install zip from sd.
Choose the rom, after this choose the gapps.
7.Restart
The first time need time. When is look like problem
pull out and in the battery.And make the handy on and wait.
PS:Read, read and read next time.
In the many threats they wrote how to install specific mods.
German is so much easier for me.
So i hope its help.
And i dont know why the people forget thanks after they take an answer.
Happy modding
I like acid sound mod 5 not 7 to improve the sound quality.
And jellyx make nice kernels for the last cm10s.
Thank you Joke19!
Could you please explain what is minimal gapps? Do I lose some functionality if I install minimal gapps instead of "full" gapps?
Danke!
fede_arg said:
Thank you Joke19!
Could you please explain what is minimal gapps? Do I lose some functionality if I install minimal gapps instead of "full" gapps?
Danke!
Click to expand...
Click to collapse
Gapps = Google Applications
So no, you won't lose functionality, and plus you can download any apps you want via the Play Store.
Thanks bro
joke19 said:
Hi,
maybe i can help you.
1.Download here the last quarz rom
http://forum.xda-developers.com/showthread.php?t=1768702
(Its beta! Its mean not perfect, but ran smotth.)
Put this on your sd.
2.Then you download gapps
minimal is enough, because your systemspace is not big.
Here a new link
http://www.uncledan.it/android-files/DefyGapps/Defy-Gapps-CM10.1-20121201-minimal.zip
And dont forget to put it on your sd.
Accu is full?
3.Restart your phone and by the blue led you push down.
4.Go in the custom or stable recovery, not stock.
5.Wipe data/factory reset.Before make a backup, when you want.
6.Install zip from sd.
Choose the rom, after this choose the gapps.
7.Restart
The first time need time. When is look like problem
pull out and in the battery.And make the handy on and wait.
PS:Read, read and read next time.
In the many threats they wrote how to install specific mods.
German is so much easier for me.
So i hope its help.
And i dont know why the people forget thanks after they take an answer.
Happy modding
I like acid sound mod 5 not 7 to improve the sound quality.
And jellyx make nice kernels for the last cm10s.
Click to expand...
Click to collapse
Thanks a lot for the procedure.
But i am confused with so many links on the page. Can you guide me out. Its really annoying fr which one to download. Also if i install will my internal memory decrease to great extent. Originally we r having 1.2GB.
jountha said:
Thanks a lot for the procedure.
But i am confused with so many links on the page. Can you guide me out. Its really annoying fr which one to download. Also if i install will my internal memory decrease to great extent. Originally we r having 1.2GB.
Click to expand...
Click to collapse
CM10-20130307-NIGHTL download this one which is stable .... later u can upgrade to the new builds :good:
and your internal memory wont decrease to that great extent...
happy flashing... all d best :angel:
thanks a lot dude
sunnysays said:
CM10-20130307-NIGHTL download this one which is stable .... later u can upgrade to the new builds :good:
and your internal memory wont decrease to that great extent...
happy flashing... all d best :angel:
Click to expand...
Click to collapse
thanks a lot man....i will surely try it out. But there is one more version available...20130404...does it have problem??
Thanks again
jountha said:
thanks a lot man....i will surely try it out. But there is one more version available...20130404...does it have problem??
Thanks again
Click to expand...
Click to collapse
I've been using sevenrock's adjusted Quarx build. However, if you read past the post you will find YAFU's post offers his take on it. They might be outdated as I haven't seen many positive comments on the recent builds. Hopefully someone can give you a more updated opinion.
Edit: As Sunny mentioned 0307 is the most recent stable one he knows. If you want to have fun then go play with the most recent just remember the newer does not always equate to better.
jountha said:
thanks a lot man....i will surely try it out. But there is one more version available...20130404...does it have problem??
Thanks again
Click to expand...
Click to collapse
Its experimental, use 18/03 or the one previously suggested
guide me on taking backup of current ROM
sunnysays said:
CM10-20130307-NIGHTL download this one which is stable .... later u can upgrade to the new builds :good:
and your internal memory wont decrease to that great extent...
happy flashing... all d best :angel:
Click to expand...
Click to collapse
I am little confused with my backup part.....i want to backup my current rom. how can i do it? can it be done with 2ndinit? if yes can you guide it out.
Go to the custom recovery option via bootmenu, navigate using volume keys and the power button to select backup and restore and then backup all
On a side note, cm10.1 is working quite well for me
Sent from my MB526 using xda premium
thanks bro
thekguy said:
Go to the custom recovery option via bootmenu, navigate using volume keys and the power button to select backup and restore and then backup all
On a side note, cm10.1 is working quite well for me
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
thanks fr the note
jountha said:
thanks a lot man....i will surely try it out. But there is one more version available...20130404...does it have problem??
Thanks again
Click to expand...
Click to collapse
Yup I know ... first try this build and later upgrade to it.... I have WiFi problem with 20130404 build ... you give a try ...
Sent from my MB525 using xda premium
running good
sunnysays said:
Yup I know ... first try this build and later upgrade to it.... I have WiFi problem with 20130404 build ... you give a try ...
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
I have installed it and it is running great......it has been running fr 25 hrs now in one go and didnt found any prob yet.
Sorry bro i m not a heavy user for Wifi so cant give decision on that.
Prob....cant sync mail contacts with normal contacts.
Phone camera is not proper. It still has some glitches.
made few calls....the receiver complains abt my voice reaching to them
The worst is the 2ndit recovery got changed. still wondering how can i recover that
Still no big prob.....Over all it is good one.
Thanks fr the suggestion
sunnysays said:
Yup I know ... first try this build and later upgrade to it.... I have WiFi problem with 20130404 build ... you give a try ...
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
i am running on CM10.1 20130404quarx ( the one with the stable kernel ) and wifi runs fine. i´m also on blechdoses 03/04 kernel, maybe it makes any difference, i don´t know. the problem is that actually the wifi prevents the phone from sleep. i resolved this problem with the battery saver app. but all at all the rom runs really fine
joke19 said:
Hi,
maybe i can help you.
1.Download here the last quarz rom
http://forum.xda-developers.com/showthread.php?t=1768702
(Its beta! Its mean not perfect, but ran smotth.)
Put this on your sd.
2.Then you download gapps
minimal is enough, because your systemspace is not big.
Here a new link
http://www.uncledan.it/android-files/DefyGapps/Defy-Gapps-CM10.1-20121201-minimal.zip
And dont forget to put it on your sd.
Accu is full?
3.Restart your phone and by the blue led you push down.
4.Go in the custom or stable recovery, not stock.
5.Wipe data/factory reset.Before make a backup, when you want.
6.Install zip from sd.
Choose the rom, after this choose the gapps.
7.Restart
The first time need time. When is look like problem
pull out and in the battery.And make the handy on and wait.
PS:Read, read and read next time.
In the many threats they wrote how to install specific mods.
German is so much easier for me.
So i hope its help.
And i dont know why the people forget thanks after they take an answer.
Happy modding
I like acid sound mod 5 not 7 to improve the sound quality.
And jellyx make nice kernels for the last cm10s.
Click to expand...
Click to collapse
Thanks a very lot! Suddenly my MB526 understands German It was a Chinese before! And now it has gapps.
I used CM10-20130318-NIGHTLY-mb526.zip and gapps-jb-20120726-minimal.zip, in case anyones wants to know.
Even more great is the fact, that it has JB 4.1.2 now!!! It was GB 2.3.4 (or something, sorry) before!
Just cool
There is a new built:
2013.10.30
Sent from my MB526 using XDA Premium 4 mobile app
Hi Everyone !
So I am really new to the world of custom ROMS and want to install one on my s3 (SGH i747). After a bit of shopping around, I really like PAC Rom.I have the following questions and would really appreciate it if someone could answer them:
1) Is there a guide for dummies like me that can walk me through the installation process ?
2) Is PAC ROM stable ? How do I update it if there are updates ? Is it good for a first time user ?
3) In this ROM, can I customise the notification area ? Like make the notification area and panel transaprent like in the stuff in IOS 7 ?
4) Will restoring from titanium backup interfere in anyway ?
Thanks for all your help !
xdaaccount123 said:
Hi Everyone !
1) Is there a guide for dummies like me that can walk me through the installation process ?
2) Is PAC ROM stable ? How do I update it if there are updates ? Is it good for a first time user ?
3) In this ROM, can I customise the notification area ? Like make the notification area and panel transaprent like in the stuff in IOS 7 ?
4) Will restoring from titanium backup interfere in anyway ?
Click to expand...
Click to collapse
Hi
1) It is like every other ROM, you just factory reset and install the zip
2) I use it on my nexus 4 and yesterday, when I received a call I was unable to get it. If you don't care about that you can try PAC ROM but cyanogenmod must be better for you
3) Yes, you can like on cyanogenmod. I'm note sure about what you mean but the notification bar is transparent like on every Kitkat based ROM
4) I don't know I never use titanium
Uruloce said:
Hi
1) It is like every other ROM, you just factory reset and install the zip
2) I use it on my nexus 4 and yesterday, when I received a call I was unable to get it. If you don't care about that you can try PAC ROM but cyanogenmod must be better for you
3) Yes, you can like on cyanogenmod. I'm note sure about what you mean but the notification bar is transparent like on every Kitkat based ROM
4) I don't know I never use titanium
Click to expand...
Click to collapse
Is the call bug frequent or a one time thing ?
Uruloce said:
Hi
1) It is like every other ROM, you just factory reset and install the zip
2) I use it on my nexus 4 and yesterday, when I received a call I was unable to get it. If you don't care about that you can try PAC ROM but cyanogenmod must be better for you
3) Yes, you can like on cyanogenmod. I'm note sure about what you mean but the notification bar is transparent like on every Kitkat based ROM
4) I don't know I never use titanium
Click to expand...
Click to collapse
Also, I am running a samsung s3 4.3 sgh i747 . Can you please tell me which PAC ROM file am I supposed to use ? Im so confused
xdaaccount123 said:
Is the call bug frequent or a one time thing ?
Click to expand...
Click to collapse
Call log problem is being worked on
In call ui crashes are fixed, just flash today's nightly
Sent from my ST18i using Tapatalk
xdaaccount123 said:
Also, I am running a samsung s3 4.3 sgh i747 . Can you please tell me which PAC ROM file am I supposed to use ? Im so confused
Click to expand...
Click to collapse
There isn't PAC ROM for your phone, you will have to choose one of those made for your phone. You can find them here: http://forum.xda-developers.com/showthread.php?t=1725839
If I was you I would choose Omni ROM
Uruloce said:
There isn't PAC ROM for your phone, you will have to choose one of those made for your phone. You can find them here: http://forum.xda-developers.com/showthread.php?t=1725839
If I was you I would choose Omni ROM
Click to expand...
Click to collapse
First of all, thanks for the link ! Also, are you sure about that ? In the above link, I went to ROMS, then Cyanogenmod 10, AOSP & AOKP and when i click show all contents, there is a link for PAC rom
xdaaccount123 said:
First of all, thanks for the link ! Also, are you sure about that ? In the above link, I went to ROMS, then Cyanogenmod 10, AOSP & AOKP and when i click show all contents, there is a link for PAC rom
Click to expand...
Click to collapse
You're right, I didn't see it,I just searched "i747" on the PAC ROM website so I couldn't find your phone.So I recommend you this PAC ROM and not the Omni ROM
I just installed the last update of PAC ROM on my nexus 4 and the phone calls work well
Uruloce said:
You're right, I didn't see it,I just searched "i747" on the PAC ROM website so I couldn't find your phone.So I recommend you this PAC ROM and not the Omni ROM
I just installed the last update of PAC ROM on my nexus 4 and the phone calls work well
Click to expand...
Click to collapse
Also, if its not too much trouble, could you tell me which file to use ? Im really overwhelmed as ofnow and have no clue what to do.
Ive reached here : http://pacman.basketbuild.com/index....d2lte/nightly/
no clue which one to choose. Again, I currently have a canadian sgh i747 running 4.3
The more recent zip is the better