I can't post this in dev section because it's my first post, so I'll try asking here.
I have a Droid X on the .621 firmware that I rooted using the "DX ezSBF & Root 2.3.4/4.5.621" which worked like a charm [THANKS sd_shadow & phifc]. Then I decided to install Kiladar's "[ROM] CM9ICS with APn Support for cricket or sprint flashed from verizon" & the ICS Gapps. All went well with the installs until I rebooted. Now I'm stuck on the boot animation for CM9, I cannot access CWM recovery because I can't bootstrap outside of the OS. I can access stock recovery, but that will not allow me to reflash due to signature verification error. Does anyone know what I can do now?
[EDIT] Fixed the issue by going into stock recovery and doing a factory reset. Rebooted, loaded OS, now so far, so good.
Related
I have installed the rooted BL7 DFP-231 SBF and everything works fine, but when I install 2ndinit the phone goes into a boot loop and I have to reflash it with RSD Lite again.
try to flashing the stock sbf, then root it from there.
There's no real way to root BL7 that people know of.. the only way is to flash the rooted SBF.
Does anyone have any idea?
Hey
try this Link
It might work
Got it all working and flashed with CM7! v1.4.2 gives permisson errors, 2.0 and 1.9 put my phone in a boot loop.. so I figured it may be because it's actually downloading the recovery you select instead of installing it locally, so I went to 1.7 and it worked like a charm!
Okay so I am not a noob to the rooting community, but something strange has been happening. I was recently on stock .621 and wanted my wi-fi tether back for my iPad, so I did some research and did the .621/.604 Linux SBF and Root. All is good when i am on that except my 3G almost never works so I installed the "BoostedICS Beta 1" and "Gummy 1.0.1" Roms (Not at the same time). The installation went smooth for both roms and they worked awesome..., BUT when i try to reboot the phone or try to go into CWM It just freezes on the boot logo or it goes into a boot loop and the phone wont start back up, so i have to keep doing SBF. I just sbf and am in CWM and wanting to install gummy again but i want to know if their is something i can do before installing it again that will stop this problem?? Please help!?
How I am installing roms:
1. Boot into CWM
2. Wipe Data/Cache/ and Delvik
3. Install Rom
4. Install GAPPS
5. Reboot
BUMP!
Try wiping system also.
Sent from my Transformer TF101 using Tapatalk 2
Please help me! I am stuck at the "cyanogen Mod 7" boot on the droid pro.
Here is what I did:
1: I rooted and installed cm7 from vanilla_lvl
2: I installed droid 2 bootstrap
3: I clicked recovery.
Now it won't move!
Update: I fixed it by sbfing back to 4.6.8 in flash bootloader, then updated to 4.7.3 using stock recovery, then I cleared everything using stock recovery.
Just finished installing CM9 on my friend's Droid X and apparently bricked it during an attempt to install CWM Touch (from apk file). For some reason, it booted to the original CWM and when I tried to reboot it just stuck at the Motorola logo. I booted it in recovery mode and wiped data/cache as suggested on other forums but it still hangs at the logo. The only possible option I can see at this point is to "apply update from sdcard" but it gives signature verification errors for every ROM I throw at it.
Managed to revive it by flashing the .621 SBF and installed CM9, this time leaving CWM alone. Probably won't ever need to go into recovery mode ever again unless development picks up for the Droid X, but if anyone knows of a compatible CWM Touch and how to install without semi-bricking the phone, please let me know.
So far, I haven't seen one. Tomsgt from rootjunky.com has some videos out there to help you.
Sent from my Droid Bionic CM 10.1.3
Hi,
I installed this SBF using RSDLite: DEFYPLUS_U3_4.5.1-134_DFP-231_ND_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P011_A013_Service1FF.sbf.gz, (GB Nordic SBF).
Then installed Framaroot 1.4.1, rooted the phone using Gimli exploit, said root successful.
Then installed 2ndInit 2.4, said install successful.
Rebooted two times, went to custom recovery, everything seemed ok. Wiped data/cache/system using AromaWiper.
Then installed the latest fixed CM7 (cm-7-20130710-UNOFFICIAL-jordan_plus-signed.zip).
Upon reboot, the phone is stuck in bootloop. I'm still able to enter the custom recovery, so I guess 2ndinit worked, but installing the aforementioned CM7 results in bootloop.
I tried scanning through the All-in-One guide here, but couldn't really pinpoint what exactly is my problem. Could someone help, what would be the steps to take to get my phone running CM7? I'm able to flash SBF and at least seemingly flash zips via custom recovery, but I suspect there is something wrong in there since the flashed zips don't seem to work.
EDIT: If anyone can help? Is it that 2ndinit was installed badly? Reinstall from SBF, re-root, pay more attention to 2ndinit install?
In the All-in-One guide I find some problems with 2ndInit and talk about GoAPK SystemRecovery? Would that help?